diff options
Diffstat (limited to 'target/foxg20/patches')
-rw-r--r-- | target/foxg20/patches/foxg20.patch | 79 |
1 files changed, 32 insertions, 47 deletions
diff --git a/target/foxg20/patches/foxg20.patch b/target/foxg20/patches/foxg20.patch index bda411c98..1f628574e 100644 --- a/target/foxg20/patches/foxg20.patch +++ b/target/foxg20/patches/foxg20.patch @@ -1,6 +1,6 @@ -diff -Nur linux-2.6.32.2.orig/arch/arm/include/asm/setup.h linux-2.6.32.2/arch/arm/include/asm/setup.h ---- linux-2.6.32.2.orig/arch/arm/include/asm/setup.h 2009-12-18 23:27:07.000000000 +0100 -+++ linux-2.6.32.2/arch/arm/include/asm/setup.h 2010-02-23 21:40:33.000000000 +0100 +diff -Nur linux-2.6.33.orig/arch/arm/include/asm/setup.h linux-2.6.33/arch/arm/include/asm/setup.h +--- linux-2.6.33.orig/arch/arm/include/asm/setup.h 2010-02-24 19:52:17.000000000 +0100 ++++ linux-2.6.33/arch/arm/include/asm/setup.h 2010-02-27 19:32:30.150085477 +0100 @@ -18,6 +18,8 @@ #define COMMAND_LINE_SIZE 1024 @@ -10,23 +10,22 @@ diff -Nur linux-2.6.32.2.orig/arch/arm/include/asm/setup.h linux-2.6.32.2/arch/a /* The list ends with an ATAG_NONE node. */ #define ATAG_NONE 0x00000000 -diff -Nur linux-2.6.32.2.orig/arch/arm/Kconfig linux-2.6.32.2/arch/arm/Kconfig ---- linux-2.6.32.2.orig/arch/arm/Kconfig 2009-12-18 23:27:07.000000000 +0100 -+++ linux-2.6.32.2/arch/arm/Kconfig 2010-02-23 21:18:53.000000000 +0100 -@@ -18,6 +18,9 @@ - select HAVE_KRETPROBES if (HAVE_KPROBES) +diff -Nur linux-2.6.33.orig/arch/arm/Kconfig linux-2.6.33/arch/arm/Kconfig +--- linux-2.6.33.orig/arch/arm/Kconfig 2010-02-24 19:52:17.000000000 +0100 ++++ linux-2.6.33/arch/arm/Kconfig 2010-02-27 20:23:52.139866005 +0100 +@@ -19,6 +19,8 @@ select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT -+ select HAVE_KERNEL_GZIP + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO help The ARM series is a line of low-power-consumption RISC chip designs - licensed by ARM Ltd and targeted at embedded applications and -diff -Nur linux-2.6.32.2.orig/arch/arm/kernel/setup.c linux-2.6.32.2/arch/arm/kernel/setup.c ---- linux-2.6.32.2.orig/arch/arm/kernel/setup.c 2009-12-18 23:27:07.000000000 +0100 -+++ linux-2.6.32.2/arch/arm/kernel/setup.c 2010-02-23 21:29:01.000000000 +0100 -@@ -806,8 +806,12 @@ +diff -Nur linux-2.6.33.orig/arch/arm/kernel/setup.c linux-2.6.33/arch/arm/kernel/setup.c +--- linux-2.6.33.orig/arch/arm/kernel/setup.c 2010-02-24 19:52:17.000000000 +0100 ++++ linux-2.6.33/arch/arm/kernel/setup.c 2010-02-27 19:32:30.212085837 +0100 +@@ -807,8 +807,12 @@ static int c_show(struct seq_file *m, void *v) { @@ -39,9 +38,9 @@ diff -Nur linux-2.6.32.2.orig/arch/arm/kernel/setup.c linux-2.6.32.2/arch/arm/ke seq_printf(m, "Processor\t: %s rev %d (%s)\n", cpu_name, read_cpuid_id() & 15, elf_platform); -diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.32.2/arch/arm/mach-at91/at91sam9260_devices.c ---- linux-2.6.32.2.orig/arch/arm/mach-at91/at91sam9260_devices.c 2009-12-18 23:27:07.000000000 +0100 -+++ linux-2.6.32.2/arch/arm/mach-at91/at91sam9260_devices.c 2010-02-23 21:18:53.000000000 +0100 +diff -Nur linux-2.6.33.orig/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.33/arch/arm/mach-at91/at91sam9260_devices.c +--- linux-2.6.33.orig/arch/arm/mach-at91/at91sam9260_devices.c 2010-02-24 19:52:17.000000000 +0100 ++++ linux-2.6.33/arch/arm/mach-at91/at91sam9260_devices.c 2010-02-27 19:32:30.233294964 +0100 @@ -454,7 +454,15 @@ .sda_is_open_drain = 1, .scl_pin = AT91_PIN_PA24, @@ -58,9 +57,9 @@ diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 }; static struct platform_device at91sam9260_twi_device = { -diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/board-foxg20.c linux-2.6.32.2/arch/arm/mach-at91/board-foxg20.c ---- linux-2.6.32.2.orig/arch/arm/mach-at91/board-foxg20.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.32.2/arch/arm/mach-at91/board-foxg20.c 2010-02-23 21:33:34.000000000 +0100 +diff -Nur linux-2.6.33.orig/arch/arm/mach-at91/board-foxg20.c linux-2.6.33/arch/arm/mach-at91/board-foxg20.c +--- linux-2.6.33.orig/arch/arm/mach-at91/board-foxg20.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.33/arch/arm/mach-at91/board-foxg20.c 2010-02-27 19:32:30.235748629 +0100 @@ -0,0 +1,376 @@ +/* + * Copyright (C) 2005 SAN People @@ -438,15 +437,17 @@ diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/board-foxg20.c linux-2.6.32.2/a + .init_irq = foxg20_init_irq, + .init_machine = foxg20_board_init, +MACHINE_END -diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Kconfig linux-2.6.32.2/arch/arm/mach-at91/Kconfig ---- linux-2.6.32.2.orig/arch/arm/mach-at91/Kconfig 2009-12-18 23:27:07.000000000 +0100 -+++ linux-2.6.32.2/arch/arm/mach-at91/Kconfig 2010-02-23 21:18:53.000000000 +0100 -@@ -333,6 +333,13 @@ +diff -Nur linux-2.6.33.orig/arch/arm/mach-at91/Kconfig linux-2.6.33/arch/arm/mach-at91/Kconfig +--- linux-2.6.33.orig/arch/arm/mach-at91/Kconfig 2010-02-24 19:52:17.000000000 +0100 ++++ linux-2.6.33/arch/arm/mach-at91/Kconfig 2010-02-27 20:22:57.467867560 +0100 +@@ -354,6 +354,15 @@ Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> +config MACH_FOXG20 + bool "Acme Systems FOX G20" ++ select HAVE_AT91_DATAFLASH_CARD ++ select HAVE_NAND_ATMEL_BUSWIDTH_16 + depends on ARCH_AT91SAM9G20 + help + Select this if you are using Acme Systems @@ -455,26 +456,10 @@ diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Kconfig linux-2.6.32.2/arch/arm endif # ---------------------------------------------------------- -@@ -388,13 +395,13 @@ - - config MTD_AT91_DATAFLASH_CARD - bool "Enable DataFlash Card support" -- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926) -+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926 || MACH_FOXG20) - help - Enable support for the DataFlash card. - - config MTD_NAND_ATMEL_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" -- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) -+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK || MACH_FOXG20) - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). -diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Makefile linux-2.6.32.2/arch/arm/mach-at91/Makefile ---- linux-2.6.32.2.orig/arch/arm/mach-at91/Makefile 2009-12-18 23:27:07.000000000 +0100 -+++ linux-2.6.32.2/arch/arm/mach-at91/Makefile 2010-02-23 21:18:53.000000000 +0100 -@@ -65,6 +65,9 @@ +diff -Nur linux-2.6.33.orig/arch/arm/mach-at91/Makefile linux-2.6.33/arch/arm/mach-at91/Makefile +--- linux-2.6.33.orig/arch/arm/mach-at91/Makefile 2010-02-24 19:52:17.000000000 +0100 ++++ linux-2.6.33/arch/arm/mach-at91/Makefile 2010-02-27 19:32:30.295749847 +0100 +@@ -66,6 +66,9 @@ # AT91SAM9G45 board-specific support obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o @@ -484,9 +469,9 @@ diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Makefile linux-2.6.32.2/arch/ar # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -diff -Nur linux-2.6.32.2.orig/drivers/mmc/host/at91_mci.c linux-2.6.32.2/drivers/mmc/host/at91_mci.c ---- linux-2.6.32.2.orig/drivers/mmc/host/at91_mci.c 2009-12-18 23:27:07.000000000 +0100 -+++ linux-2.6.32.2/drivers/mmc/host/at91_mci.c 2010-02-23 21:18:53.000000000 +0100 +diff -Nur linux-2.6.33.orig/drivers/mmc/host/at91_mci.c linux-2.6.33/drivers/mmc/host/at91_mci.c +--- linux-2.6.33.orig/drivers/mmc/host/at91_mci.c 2010-02-24 19:52:17.000000000 +0100 ++++ linux-2.6.33/drivers/mmc/host/at91_mci.c 2010-02-27 19:32:30.295749847 +0100 @@ -461,7 +461,7 @@ at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); mr = AT91_MCI_PDCMODE | 0x34a; |