summaryrefslogtreecommitdiff
path: root/package/busybox/config/networking
diff options
context:
space:
mode:
Diffstat (limited to 'package/busybox/config/networking')
-rw-r--r--package/busybox/config/networking/Config.in75
-rw-r--r--package/busybox/config/networking/udhcp/Config.in5
2 files changed, 68 insertions, 12 deletions
diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in
index 27409a8ad..b9211f4fa 100644
--- a/package/busybox/config/networking/Config.in
+++ b/package/busybox/config/networking/Config.in
@@ -49,19 +49,22 @@ config BUSYBOX_VERBOSE_RESOLUTION_ERRORS
config BUSYBOX_ARP
bool "arp"
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
Manipulate the system ARP cache.
config BUSYBOX_ARPING
bool "arping"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
Ping hosts by ARP packets.
config BUSYBOX_BRCTL
bool "brctl"
depends on !ADK_PACKAGE_BRIDGE_UTILS
- default n
+ default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
Manage ethernet bridges.
Supports addbr/delbr and addif/delif.
@@ -95,6 +98,7 @@ config BUSYBOX_ETHER_WAKE
bool "ether-wake"
depends on !ADK_PACKAGE_ETHER_WAKE
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
@@ -124,8 +128,8 @@ config BUSYBOX_FEATURE_FTPD_ACCEPT_BROKEN_LIST
default y
depends on BUSYBOX_FTPD
help
- Some ftp-clients (among them KDE's Konqueror) issue illegal
- "LIST -la" requests. This option works around those problems.
+ Some ftp clients (among them KDE's Konqueror) issue illegal
+ "LIST -l" requests. This option works around such problems.
It might prevent you from listing files starting with "-" and
it increases the code size by ~40 bytes.
Most other ftp servers seem to behave similar to this.
@@ -266,9 +270,18 @@ config BUSYBOX_FEATURE_HTTPD_PROXY
Then a request to /url/myfile will be forwarded to
http://hostname[:port]/new/path/myfile.
+config BUSYBOX_FEATURE_HTTPD_GZIP
+ bool "Support for GZIP content encoding"
+ default y
+ depends on BUSYBOX_HTTPD
+ help
+ Makes httpd send files using GZIP content encoding if the
+ client supports it and a pre-compressed <file>.gz exists.
+
config BUSYBOX_IFCONFIG
bool "ifconfig"
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
Ifconfig is used to configure the kernel-resident network interfaces.
@@ -316,6 +329,7 @@ config BUSYBOX_FEATURE_IFCONFIG_BROADCAST_PLUS
config BUSYBOX_IFENSLAVE
bool "ifenslave"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
Userspace application to bind several interfaces
to a logical interface (use with kernel bonding driver).
@@ -323,6 +337,7 @@ config BUSYBOX_IFENSLAVE
config BUSYBOX_IFPLUGD
bool "ifplugd"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
Network interface plug detection daemon.
@@ -364,7 +379,7 @@ config BUSYBOX_FEATURE_IFUPDOWN_IP
config BUSYBOX_FEATURE_IFUPDOWN_IP_BUILTIN
bool "Use busybox ip applet"
default y
- depends on BUSYBOX_FEATURE_IFUPDOWN_IP
+ depends on BUSYBOX_FEATURE_IFUPDOWN_IP && BUSYBOX_PLATFORM_LINUX
select BUSYBOX_IP
select BUSYBOX_FEATURE_IP_ADDRESS
select BUSYBOX_FEATURE_IP_LINK
@@ -484,6 +499,7 @@ config BUSYBOX_IP
bool "ip"
depends on !ADK_PACKAGE_IP
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
utility. You generally don't need "ip" to use busybox with
@@ -599,6 +615,7 @@ config BUSYBOX_FEATURE_IPCALC_LONG_OPTIONS
config BUSYBOX_NAMEIF
bool "nameif"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
select BUSYBOX_FEATURE_SYSLOG
help
nameif is used to rename network interface by its MAC address.
@@ -624,11 +641,11 @@ config BUSYBOX_FEATURE_NAMEIF_EXTENDED
new_interface_name mac=00:80:C8:38:91:B5
new_interface_name 00:80:C8:38:91:B5
-config NBDCLIENT
- bool "nbd-client"
- default n
- help
- Network block device client
+config BUSYBOX_NBDCLIENT
+ bool "nbd-client"
+ default n
+ help
+ Network block device client
config BUSYBOX_NC
bool "nc"
@@ -653,9 +670,20 @@ config BUSYBOX_NC_EXTRA
making or receiving a successful connection), -i (delay interval for
lines sent), -w (timeout for initial connection).
+config BUSYBOX_NC_110_COMPAT
+ bool "Netcat 1.10 compatibility (+2.5k)"
+ default n # off specially for Rob
+ depends on BUSYBOX_NC
+ help
+ This option makes nc closely follow original nc-1.10.
+ The code is about 2.5k bigger. It enables
+ -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+ busybox-specific extensions: -f FILE and -ll.
+
config BUSYBOX_NETSTAT
bool "netstat"
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
netstat prints information about the Linux networking subsystem.
@@ -684,6 +712,7 @@ config BUSYBOX_NSLOOKUP
config BUSYBOX_NTPD
bool "ntpd"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
The NTP client/server daemon.
@@ -698,6 +727,7 @@ config BUSYBOX_FEATURE_NTPD_SERVER
config BUSYBOX_PING
bool "ping"
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
elicit an ICMP ECHO_RESPONSE from a host or gateway.
@@ -726,12 +756,14 @@ config BUSYBOX_PSCAN
config BUSYBOX_ROUTE
bool "route"
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
config BUSYBOX_SLATTACH
bool "slattach"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
slattach is a small utility to attach network interfaces to serial
lines.
@@ -861,8 +893,11 @@ config BUSYBOX_TFTPD
In other words: it should be run from inetd in nowait mode,
or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+comment "Common options for tftp/tftpd"
+ depends on BUSYBOX_TFTP || BUSYBOX_TFTPD
+
config BUSYBOX_FEATURE_TFTP_GET
- bool "Enable \"get\" command"
+ bool "Enable 'tftp get' and/or tftpd upload code"
default y
depends on BUSYBOX_TFTP || BUSYBOX_TFTPD
help
@@ -870,8 +905,11 @@ config BUSYBOX_FEATURE_TFTP_GET
a client to retrieve a file from a TFTP server.
Also enable upload support in tftpd, if tftpd is selected.
+ Note: this option does _not_ make tftpd capable of download
+ (the usual operation people need from it)!
+
config BUSYBOX_FEATURE_TFTP_PUT
- bool "Enable \"put\" command"
+ bool "Enable 'tftp put' and/or tftpd download code"
default y
depends on BUSYBOX_TFTP || BUSYBOX_TFTPD
help
@@ -905,6 +943,7 @@ config BUSYBOX_TFTP_DEBUG
config BUSYBOX_TRACEROUTE
bool "traceroute"
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
Utility to trace the route of IP packets.
@@ -985,9 +1024,22 @@ config BUSYBOX_FEATURE_WGET_LONG_OPTIONS
help
Support long options for the wget applet.
+config BUSYBOX_FEATURE_WGET_TIMEOUT
+ bool "Enable read timeout option -T SEC"
+ default y
+ depends on BUSYBOX_WGET
+ help
+ Supports network read timeout for wget, so that wget will give
+ up and timeout when reading network data, through the -T command
+ line option. Currently only network data read timeout is
+ supported (i.e., timeout is not applied to the DNS nor TCP
+ connection initialization). When FEATURE_WGET_LONG_OPTIONS is
+ also enabled, the --timeout option will work in addition to -T.
+
config BUSYBOX_ZCIP
bool "zcip"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
select BUSYBOX_FEATURE_SYSLOG
help
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
@@ -1007,6 +1059,7 @@ config BUSYBOX_TCPSVD
config BUSYBOX_TUNCTL
bool "tunctl"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
tunctl creates or deletes tun devices.
diff --git a/package/busybox/config/networking/udhcp/Config.in b/package/busybox/config/networking/udhcp/Config.in
index 5b2586f66..2ace4737b 100644
--- a/package/busybox/config/networking/udhcp/Config.in
+++ b/package/busybox/config/networking/udhcp/Config.in
@@ -6,6 +6,7 @@
config BUSYBOX_UDHCPD
bool "udhcp server (udhcpd)"
default n
+ depends on BUSYBOX_PLATFORM_LINUX
help
udhcpd is a DHCP server geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
@@ -49,6 +50,7 @@ config BUSYBOX_DHCPD_LEASES_FILE
config BUSYBOX_UDHCPC
bool "udhcp client (udhcpc)"
default y
+ depends on BUSYBOX_PLATFORM_LINUX
help
udhcpc is a DHCP client geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
@@ -92,7 +94,8 @@ config BUSYBOX_FEATURE_UDHCP_RFC3397
depends on BUSYBOX_UDHCPD || BUSYBOX_UDHCPC
help
If selected, both client and server will support passing of domain
- search lists via option 119, specified in RFC3397.
+ search lists via option 119, specified in RFC 3397,
+ and SIP servers option 120, specified in RFC 3361.
config BUSYBOX_UDHCPC_DEFAULT_SCRIPT
string "Absolute path to config script"