1 files changed, 93 insertions, 0 deletions
diff --git a/package/brcmfmac-firmware/src/brcm/brcmfmac43436-sdio.txt b/package/brcmfmac-firmware/src/brcm/brcmfmac43436-sdio.txt
new file mode 100644
index 000000000..8eba004ee
--- /dev/null
+++ b/package/brcmfmac-firmware/src/brcm/brcmfmac43436-sdio.txt
@@ -0,0 +1,93 @@
+# NVRAM file for BCM943430WLPTH, Bx Chip
+# 2.4 GHz, 20 MHz BW mode
+# $ Copyright Broadcom $
+#
+#
+# <<Broadcom-WL-IPTag/Proprietary:>>
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1331
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-203,6150,-732
+
+#PA parameters for 2.4GHz, measured at CELL_BLOCK_PORT output
+#pa2ga0=-191,6027,-713
+
+#PA parameters for 2.4GHz, measured at LTE_BLOCK_PORT output
+#pa2ga0=-161,5458,-639
+
+
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=78
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x76611111
+propbw202gpo=0xcc
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+#ltecxmux=0
+#ltecxpadnum=0x0102
+#ltecxfnsel=0x44
+#ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG, 0x10 for OOB
+muxenab=0x10
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3
+
+AvVmidIQcal=0x2,0xa8 
+
+#SW based desense - Enable by default
+#i.e using glitich statistcs as critria to change crsmin
+glitch_based_crsmin=1
+
+#/* EDTHRESH default value */
+edonthd20l=-62
+edoffthd20ul=-68
+#/* EDTHRESH adjust offset once ACI active */
+edonthd20l_adj=2
+edoffthd20ul_adj=2
+
+# Improved Bluetooth coexistence parameters
+btc_mode=1
+btc_params8=0x4e20
+btc_params1=0x7530