diff options
| -rw-r--r-- | target/config/Config.in | 205 | ||||
| -rw-r--r-- | target/config/Config.in.hardware | 76 | ||||
| -rw-r--r-- | target/config/Config.in.qemu | 125 | ||||
| -rw-r--r-- | target/linux/config/Config.in.ethernet | 136 | ||||
| -rw-r--r-- | target/linux/config/Config.in.netdevice | 512 | ||||
| -rw-r--r-- | target/linux/config/Config.in.wireless | 275 |
6 files changed, 618 insertions, 711 deletions
diff --git a/target/config/Config.in b/target/config/Config.in index 96cce9aba..3d613bb1e 100644 --- a/target/config/Config.in +++ b/target/config/Config.in @@ -1,6 +1,9 @@ # This file is part of the OpenADK project. OpenADK is copyrighted # material, please see the LICENCE file in the top-level directory. +source "target/config/Config.in.hardware" +source "target/config/Config.in.qemu" + config ADK_TARGET_KERNEL_VMLINUZ boolean @@ -238,210 +241,10 @@ config ADK_TARGET_CUBOX_I1 endchoice - -config ADK_QEMU_ARGS - string - default "-nographic" if ADK_TARGET_QEMU_WITHOUT_GRAPHIC - -menu "Qemu configuration" -depends on ADK_HARDWARE_QEMU - -choice -prompt "Use a Bootloader" -depends on ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86 - -config ADK_TARGET_QEMU_WITHOUT_BOOTLOADER - boolean "do not use bootloader" - -config ADK_TARGET_QEMU_WITH_BOOTLOADER - boolean "use bootloader" - select ADK_PACKAGE_GRUB if ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86 - -endchoice - -choice -prompt "Qemu MICROBLAZE Emulation" -depends on ADK_TARGET_SYSTEM_QEMU_MICROBLAZE || ADK_TARGET_SYSTEM_QEMU_MICROBLAZEEL - -config ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800 - boolean "Xilinx Spartan S3ADSP1800" - -config ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605 - boolean "Xilinx ml605" - -endchoice - -choice -prompt "Qemu ARM Emulation" -depends on ADK_TARGET_SYSTEM_QEMU_ARM || ADK_TARGET_SYSTEM_QEMU_ARMHF - -config ADK_TARGET_QEMU_ARM_MODEL_VEXPRESS_A9 - boolean "ARM Ltd. Versatile Express for Cortex-A9" - select ADK_CPU_CORTEX_A9 - -config ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB - boolean "ARM Ltd. Versatile/PB" - select ADK_soft_float - select ADK_eabi - select ADK_CPU_ARM926EJ_S - depends on ADK_TARGET_SYSTEM_QEMU_ARM - -config ADK_TARGET_QEMU_ARM_MODEL_SPITZ - boolean "Xscale PXA270 Spitz PDA" - select ADK_soft_float - select ADK_eabi - select ADK_CPU_XSCALE - depends on ADK_TARGET_SYSTEM_QEMU_ARM - -endchoice - -choice -prompt "Qemu Emulation with permanent storage device (disk/flash)" -depends on ADK_HARDWARE_QEMU -default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_ARCHIVE -default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_SQUASHFS -default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_JFFS2 - -config ADK_TARGET_QEMU_WITHOUT_BLOCK - boolean "disabled" - -config ADK_TARGET_QEMU_WITH_BLOCK - boolean "enabled" - select ADK_KERNEL_SCSI_SYM53C8XX_2 if ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB - select ADK_KERNEL_MTD_M25P80 if ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605 || ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800 - select ADK_KERNEL_ATA_PIIX if ADK_LINUX_MIPS || ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64 - select ADK_KERNEL_PATA_MACIO if ADK_TARGET_SYSTEM_QEMU_PPC - select ADK_KERNEL_SCSI_IBMVSCSI if ADK_TARGET_SYSTEM_QEMU_PPC64 - select ADK_KERNEL_SCSI_SUNESP if ADK_TARGET_SYSTEM_QEMU_SPARC - select ADK_KERNEL_PATA_PLATFORM if ADK_LINUX_SH - -endchoice - -choice -prompt "Qemu Emulation with graphical output" -depends on ADK_HARDWARE_QEMU - -config ADK_TARGET_QEMU_WITHOUT_GRAPHIC - boolean "disabled" - -config ADK_TARGET_QEMU_WITH_GRAPHIC - boolean "enabled" - select ADK_KERNEL_VT - select ADK_KERNEL_VT_CONSOLE - select ADK_KERNEL_FONTS - select ADK_KERNEL_FONT_8x16 - select ADK_KERNEL_FB - select ADK_KERNEL_FRAMEBUFFER_CONSOLE - select ADK_KERNEL_FB_SM501 if ADK_LINUX_SH - select ADK_KERNEL_FB_CIRRUS if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64 - select ADK_KERNEL_FB_PXA if ADK_TARGET_QEMU_ARM_MODEL_SPITZ - select ADK_KERNEL_INPUT - select ADK_KERNEL_INPUT_KEYBOARD - select ADK_KERNEL_KEYBOARD_ATKBD if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64 - select ADK_KERNEL_USB_HID if ADK_LINUX_SH - select ADK_KERNEL_USB_OHCI_HCD_PLATFORM if ADK_LINUX_SH - -endchoice - -choice -prompt "Qemu Emulation using VirtIO drivers" -depends on ADK_TARGET_SYSTEM_QEMU_SPARC64 || \ - ADK_TARGET_SYSTEM_QEMU_I686 || \ - ADK_TARGET_SYSTEM_QEMU_X86_64 -default ADK_TARGET_QEMU_WITH_VIRTIO if ADK_TARGET_SYSTEM_QEMU_SPARC64 - -config ADK_TARGET_QEMU_WITHOUT_VIRTIO - boolean "disabled" - -config ADK_TARGET_QEMU_WITH_VIRTIO - boolean "enabled" - select ADK_KERNEL_BLK_DEV - select ADK_KERNEL_VIRTIO - select ADK_KERNEL_VIRTIO_PCI - select ADK_KERNEL_VIRTIO_NET - select ADK_KERNEL_VIRTIO_BLK - -endchoice - -endmenu - -# hardware features, do not use for qemu -config ADK_TARGET_WITH_USB - boolean - -config ADK_TARGET_WITH_I2C - boolean - -config ADK_TARGET_WITH_PCI - boolean - -config ADK_TARGET_WITH_SSB - boolean - -config ADK_TARGET_WITH_AHB - boolean - -config ADK_TARGET_WITH_MINIPCI - boolean - -config ADK_TARGET_WITH_ACPI - boolean - -config ADK_TARGET_WITH_VGA - boolean - -config ADK_TARGET_WITH_NAND - boolean - -config ADK_TARGET_WITH_MTD - boolean - -config ADK_TARGET_WITH_GEODE_CRYPTO - boolean - -config ADK_TARGET_WITH_HDD - boolean - -config ADK_TARGET_WITH_SATA - boolean - -config ADK_TARGET_WITH_INPUT - boolean - -config ADK_TARGET_WITH_SOUND - boolean - -config ADK_TARGET_WITH_TOUCHSCREEN - boolean - -config ADK_TARGET_WITH_LEDS - boolean - -config ADK_TARGET_WITH_PP - boolean - -config ADK_TARGET_WITH_CARDBUS - boolean - -config ADK_TARGET_WITH_PCMCIA - boolean - -config ADK_TARGET_WITH_RTC - boolean - -config ADK_TARGET_WITH_WATCHDOG - boolean - -config ADK_TARGET_WITH_DSL - boolean - -config ADK_TARGET_WITH_USB_BOOT - boolean - +# global symbols config ADK_TARGET_KERNEL_MAY_64BIT boolean -# global symbols config ADK_TOOLCHAIN_ONLY boolean diff --git a/target/config/Config.in.hardware b/target/config/Config.in.hardware new file mode 100644 index 000000000..0dd0c5f3d --- /dev/null +++ b/target/config/Config.in.hardware @@ -0,0 +1,76 @@ +# hardware features, do not use for qemu +config ADK_TARGET_WITH_USB + boolean + +config ADK_TARGET_WITH_I2C + boolean + +config ADK_TARGET_WITH_PCI + boolean + +config ADK_TARGET_WITH_SSB + boolean + +config ADK_TARGET_WITH_SDIO + boolean + +config ADK_TARGET_WITH_AHB + boolean + +config ADK_TARGET_WITH_MINIPCI + boolean + +config ADK_TARGET_WITH_ACPI + boolean + +config ADK_TARGET_WITH_VGA + boolean + +config ADK_TARGET_WITH_NAND + boolean + +config ADK_TARGET_WITH_MTD + boolean + +config ADK_TARGET_WITH_GEODE_CRYPTO + boolean + +config ADK_TARGET_WITH_HDD + boolean + +config ADK_TARGET_WITH_SATA + boolean + +config ADK_TARGET_WITH_INPUT + boolean + +config ADK_TARGET_WITH_SOUND + boolean + +config ADK_TARGET_WITH_TOUCHSCREEN + boolean + +config ADK_TARGET_WITH_LEDS + boolean + +config ADK_TARGET_WITH_PP + boolean + +config ADK_TARGET_WITH_CARDBUS + boolean + +config ADK_TARGET_WITH_PCMCIA + boolean + +config ADK_TARGET_WITH_RTC + boolean + +config ADK_TARGET_WITH_WATCHDOG + boolean + +config ADK_TARGET_WITH_DSL + boolean + +config ADK_TARGET_WITH_USB_BOOT + boolean + diff --git a/target/config/Config.in.qemu b/target/config/Config.in.qemu new file mode 100644 index 000000000..71b0130e4 --- /dev/null +++ b/target/config/Config.in.qemu @@ -0,0 +1,125 @@ +config ADK_QEMU_ARGS + string + default "-nographic" if ADK_TARGET_QEMU_WITHOUT_GRAPHIC + +menu "Qemu configuration" +depends on ADK_HARDWARE_QEMU + +choice +prompt "Use a Bootloader" +depends on ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86 + +config ADK_TARGET_QEMU_WITHOUT_BOOTLOADER + boolean "do not use bootloader" + +config ADK_TARGET_QEMU_WITH_BOOTLOADER + boolean "use bootloader" + select ADK_PACKAGE_GRUB if ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86 + +endchoice + +choice +prompt "Qemu MICROBLAZE Emulation" +depends on ADK_TARGET_SYSTEM_QEMU_MICROBLAZE || ADK_TARGET_SYSTEM_QEMU_MICROBLAZEEL + +config ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800 + boolean "Xilinx Spartan S3ADSP1800" + +config ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605 + boolean "Xilinx ml605" + +endchoice + +choice +prompt "Qemu ARM Emulation" +depends on ADK_TARGET_SYSTEM_QEMU_ARM || ADK_TARGET_SYSTEM_QEMU_ARMHF + +config ADK_TARGET_QEMU_ARM_MODEL_VEXPRESS_A9 + boolean "ARM Ltd. Versatile Express for Cortex-A9" + select ADK_CPU_CORTEX_A9 + +config ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB + boolean "ARM Ltd. Versatile/PB" + select ADK_soft_float + select ADK_eabi + select ADK_CPU_ARM926EJ_S + depends on ADK_TARGET_SYSTEM_QEMU_ARM + +config ADK_TARGET_QEMU_ARM_MODEL_SPITZ + boolean "Xscale PXA270 Spitz PDA" + select ADK_soft_float + select ADK_eabi + select ADK_CPU_XSCALE + depends on ADK_TARGET_SYSTEM_QEMU_ARM + +endchoice + +choice +prompt "Qemu Emulation with permanent storage device (disk/flash)" +depends on ADK_HARDWARE_QEMU +default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_ARCHIVE +default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_SQUASHFS +default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_JFFS2 + +config ADK_TARGET_QEMU_WITHOUT_BLOCK + boolean "disabled" + +config ADK_TARGET_QEMU_WITH_BLOCK + boolean "enabled" + select ADK_KERNEL_SCSI_SYM53C8XX_2 if ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB + select ADK_KERNEL_MTD_M25P80 if ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605 || ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800 + select ADK_KERNEL_ATA_PIIX if ADK_LINUX_MIPS || ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64 + select ADK_KERNEL_PATA_MACIO if ADK_TARGET_SYSTEM_QEMU_PPC + select ADK_KERNEL_SCSI_IBMVSCSI if ADK_TARGET_SYSTEM_QEMU_PPC64 + select ADK_KERNEL_SCSI_SUNESP if ADK_TARGET_SYSTEM_QEMU_SPARC + select ADK_KERNEL_PATA_PLATFORM if ADK_LINUX_SH + +endchoice + +choice +prompt "Qemu Emulation with graphical output" +depends on ADK_HARDWARE_QEMU + +config ADK_TARGET_QEMU_WITHOUT_GRAPHIC + boolean "disabled" + +config ADK_TARGET_QEMU_WITH_GRAPHIC + boolean "enabled" + select ADK_KERNEL_VT + select ADK_KERNEL_VT_CONSOLE + select ADK_KERNEL_FONTS + select ADK_KERNEL_FONT_8x16 + select ADK_KERNEL_FB + select ADK_KERNEL_FRAMEBUFFER_CONSOLE + select ADK_KERNEL_FB_SM501 if ADK_LINUX_SH + select ADK_KERNEL_FB_CIRRUS if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64 + select ADK_KERNEL_FB_PXA if ADK_TARGET_QEMU_ARM_MODEL_SPITZ + select ADK_KERNEL_INPUT + select ADK_KERNEL_INPUT_KEYBOARD + select ADK_KERNEL_KEYBOARD_ATKBD if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64 + select ADK_KERNEL_USB_HID if ADK_LINUX_SH + select ADK_KERNEL_USB_OHCI_HCD_PLATFORM if ADK_LINUX_SH + +endchoice + +choice +prompt "Qemu Emulation using VirtIO drivers" +depends on ADK_TARGET_SYSTEM_QEMU_SPARC64 || \ + ADK_TARGET_SYSTEM_QEMU_I686 || \ + ADK_TARGET_SYSTEM_QEMU_X86_64 +default ADK_TARGET_QEMU_WITH_VIRTIO if ADK_TARGET_SYSTEM_QEMU_SPARC64 + +config ADK_TARGET_QEMU_WITHOUT_VIRTIO + boolean "disabled" + +config ADK_TARGET_QEMU_WITH_VIRTIO + boolean "enabled" + select ADK_KERNEL_BLK_DEV + select ADK_KERNEL_VIRTIO + select ADK_KERNEL_VIRTIO_PCI + select ADK_KERNEL_VIRTIO_NET + select ADK_KERNEL_VIRTIO_BLK + +endchoice + +endmenu diff --git a/target/linux/config/Config.in.ethernet b/target/linux/config/Config.in.ethernet new file mode 100644 index 000000000..8d829efc2 --- /dev/null +++ b/target/linux/config/Config.in.ethernet @@ -0,0 +1,136 @@ +menu "Ethernet network devices support" +comment "network driver for target system is included into kernel" + +config ADK_KERNEL_NET_ETHERNET + boolean + +config ADK_KERNEL_NET_VENDOR_NATSEMI + boolean + +config ADK_KERNEL_NET_VENDOR_8390 + boolean + +config ADK_KERNEL_NET_VENDOR_REALTEK + boolean + +config ADK_KERNEL_NET_VENDOR_MARVELL + boolean + +config ADK_KERNEL_PHYLIB + boolean + +config ADK_KERNEL_MII + boolean + +config ADK_KERNEL_USB_USBNET + boolean + +config ADK_KERNEL_NET_PCI + boolean + +config ADK_KERNEL_NETDEV_1000 + boolean + +config ADK_KERNEL_VIA_RHINE_MMIO + boolean + +config ADK_KERNEL_ATH_CARDS + boolean + +config ADK_KERNEL_USB_NET_SMSC95XX + boolean + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_USB_USBNET + default y if ADK_TARGET_SYSTEM_RASPBERRY_PI + default n + help + +menu "Ethernet card support" +depends on ADK_TARGET_WITH_PCI + +config ADK_KPACKAGE_KMOD_NE2K_PCI + prompt "kmod-net-ne2k-pci............. NE2000 PCI driver" + tristate + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NET_PCI + select ADK_KERNEL_NET_VENDOR_NATSEMI + select ADK_KERNEL_NET_VENDOR_8390 + select ADK_KERNEL_MII + default n + help + NE2000 pci driver + +config ADK_KPACKAGE_KMOD_PCNET32 + prompt "kmod-net-pcnet32.............. AMD PCNet32 PCI driver" + tristate + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NET_PCI + select ADK_KERNEL_MII + default n + help + AMD PCnet32 driver + +config ADK_KPACKAGE_KMOD_8139CP + prompt "kmod-net-rtl8139cp............ RTL8139C+ PCI driver" + tristate + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NET_PCI + select ADK_KERNEL_NET_VENDOR_REALTEK + select ADK_KERNEL_MII + default n + help + RTL8139C+ pci driver + +config ADK_KPACKAGE_KMOD_8139TOO + prompt "kmod-net-rtl8139.............. RTL8139 PCI driver" + tristate + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NET_PCI + select ADK_KERNEL_MII + default n + help + RTL8139 pci driver + +config ADK_KPACKAGE_KMOD_E100 + prompt "kmod-net-e100................. Intel(R) PRO/100+ driver" + tristate + select ADK_KERNEL_NET_PCI + select ADK_KERNEL_MII + default n + help + Intel(R) PRO/100+ cards kernel support + +config ADK_KPACKAGE_KMOD_E1000 + prompt "kmod-net-e1000................ Intel(R) PRO/1000 Gigabit Ethernet driver" + tristate + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NETDEV_1000 + default n + help + This driver supports Intel(R) PRO/1000 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + +config ADK_KPACKAGE_KMOD_SKY2 + prompt "kmod-net-sky2................. Marvell Yukon driver" + tristate + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NETDEV_1000 + select ADK_KERNEL_NET_VENDOR_MARVELL + default n + help + +config ADK_KPACKAGE_KMOD_R8169 + prompt "kmod-net-r8169................ RTL8169 driver" + tristate + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NETDEV_1000 + select ADK_KERNEL_MII + select ADK_KPACKAGE_KMOD_FW_LOADER + default n + help + +endmenu +endmenu diff --git a/target/linux/config/Config.in.netdevice b/target/linux/config/Config.in.netdevice index 64bfb15f4..4a6d6b781 100644 --- a/target/linux/config/Config.in.netdevice +++ b/target/linux/config/Config.in.netdevice @@ -1,510 +1,2 @@ -menu "Network devices support" -comment "Ethernet network driver for target system is included into kernel" - -config ADK_KERNEL_NET_ETHERNET - boolean - -config ADK_KERNEL_NET_VENDOR_NATSEMI - boolean - -config ADK_KERNEL_NET_VENDOR_8390 - boolean - -config ADK_KERNEL_NET_VENDOR_REALTEK - boolean - -config ADK_KERNEL_NET_VENDOR_MARVELL - boolean - -config ADK_KERNEL_PHYLIB - boolean - -config ADK_KERNEL_MII - boolean - -config ADK_KERNEL_USB_USBNET - boolean - -config ADK_KERNEL_NET_PCI - boolean - -config ADK_KERNEL_NETDEV_1000 - boolean - -config ADK_KERNEL_VIA_RHINE_MMIO - boolean - -config ADK_KERNEL_ATH_CARDS - boolean - -config ADK_KERNEL_CPMAC - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default y if ADK_TARGET_SYSTEM_LINKSYS_AG241 - default n - help - -config ADK_KERNEL_MACB - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 - default y if ADK_TARGET_SYSTEM_ATMEL_NGW100 - default n - help - -config ADK_KERNEL_PCNET32 - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default n - help - -config ADK_KERNEL_NATSEMI - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default y if ADK_TARGET_SYSTEM_PCENGINES_WRAP - default n - help - -config ADK_KERNEL_VIA_RHINE - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532 - default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C - default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2 - default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13 - default n - help - -config ADK_KERNEL_AR231X_ETHERNET - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - select ADK_KERNEL_PHYLIB - default y if ADK_TARGET_SYSTEM_FON_FON2100 - default n - help - -config ADK_KERNEL_KORINA - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532 - default n - help - -config ADK_KERNEL_AG71XX - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - select ADK_KERNEL_NETDEV_1000 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX - default n - help - -config ADK_KERNEL_B44 - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default y if ADK_TARGET_SYSTEM_BROADCOM_BCM47XX - default n - help - -config ADK_KERNEL_R8169 - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NETDEV_1000 - select ADK_KERNEL_MII - select ADK_KPACKAGE_KMOD_FW_LOADER - default n - help - -config ADK_KERNEL_USB_NET_SMSC95XX - boolean - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_USB_USBNET - default y if ADK_TARGET_SYSTEM_RASPBERRY_PI - default n - help - -menu "Ethernet card support" -depends on ADK_TARGET_WITH_PCI - -config ADK_KPACKAGE_KMOD_NE2K_PCI - prompt "kmod-net-ne2k-pci............. NE2000 PCI driver" - tristate - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_NET_VENDOR_NATSEMI - select ADK_KERNEL_NET_VENDOR_8390 - select ADK_KERNEL_MII - default n - help - NE2000 pci driver - -config ADK_KPACKAGE_KMOD_PCNET32 - prompt "kmod-net-pcnet32.............. AMD PCNet32 PCI driver" - tristate - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default n - help - AMD PCnet32 driver - -config ADK_KPACKAGE_KMOD_8139CP - prompt "kmod-net-rtl8139cp............ RTL8139C+ PCI driver" - tristate - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_NET_VENDOR_REALTEK - select ADK_KERNEL_MII - default n - help - RTL8139C+ pci driver - -config ADK_KPACKAGE_KMOD_8139TOO - prompt "kmod-net-rtl8139.............. RTL8139 PCI driver" - tristate - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default n - help - RTL8139 pci driver - -config ADK_KPACKAGE_KMOD_E100 - prompt "kmod-net-e100................. Intel(R) PRO/100+ driver" - tristate - select ADK_KERNEL_NET_PCI - select ADK_KERNEL_MII - default n - help - Intel(R) PRO/100+ cards kernel support - -config ADK_KPACKAGE_KMOD_E1000 - prompt "kmod-net-e1000................ Intel(R) PRO/1000 Gigabit Ethernet driver" - tristate - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NETDEV_1000 - depends on !ADK_KERNEL_E1000 - default n - help - This driver supports Intel(R) PRO/1000 gigabit ethernet family of - adapters. For more information on how to identify your adapter, go - to the Adapter & Driver ID Guide at: - - <http://support.intel.com/support/network/adapter/pro100/21397.htm> - -config ADK_KPACKAGE_KMOD_SKY2 - prompt "kmod-net-sky2................. Marvell Yukon driver" - tristate - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NETDEV_1000 - select ADK_KERNEL_NET_VENDOR_MARVELL - depends on !ADK_KERNEL_SKY2 - default n - help - -config ADK_KPACKAGE_KMOD_R8169 - prompt "kmod-net-r8169................ RTL8169 driver" - tristate - select ADK_KERNEL_NET_ETHERNET - select ADK_KERNEL_NETDEV_1000 - select ADK_KERNEL_MII - select ADK_KPACKAGE_KMOD_FW_LOADER - depends on !ADK_KERNEL_R8169 - default n - help - -endmenu - -config ADK_KERNEL_WLAN - boolean - -config ADK_KERNEL_WIRELESS - select ADK_KERNEL_WLAN - boolean - -config ADK_KERNEL_WIRELESS_EXT - boolean - -config ADK_KPACKAGE_KMOD_RFKILL - tristate - -config ADK_KERNEL_MAC80211_LEDS - boolean - select ADK_KPACKAGE_KMOD_LEDS_CLASS - select ADK_KERNEL_NEW_LEDS - select ADK_KERNEL_LEDS_TRIGGERS - -config ADK_KERNEL_WLAN_80211 - boolean - -config ADK_KPACKAGE_KMOD_RT2X00 - tristate - -config ADK_KPACKAGE_KMOD_RT2X00_LIB_USB - tristate - -config ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI - tristate - -config ADK_KERNEL_RTL_CARDS - boolean - -config ADK_KERNEL_RT2X00 - boolean - select ADK_KPACKAGE_KMOD_RT2X00 - select ADK_KPACKAGE_KMOD_FW_LOADER - select ADK_KPACKAGE_KMOD_EEPROM_93CX6 - -config ADK_KERNEL_RT2800USB_RT3573 - boolean - -config ADK_KERNEL_RT2800USB_RT53XX - boolean - -config ADK_KERNEL_RT2800USB_RT55XX - boolean - -config ADK_KERNEL_RT2800USB_UNKNOWN - boolean - -config ADK_KERNEL_MOD_CFG80211 - tristate - -config ADK_KERNEL_MOD_LIB80211 - select ADK_KPACKAGE_KMOD_CRYPTO_MICHAEL_MIC - tristate - -config ADK_KERNEL_CFG80211_WEXT - boolean - -config ADK_KERNEL_ATH_COMMON - tristate - -config ADK_KPACKAGE_KMOD_P54_COMMON - tristate - -config ADK_KERNEL_MAC80211_DEBUG_MENU - boolean - -config ADK_KERNEL_MAC80211_VERBOSE_DEBUG - select ADK_KERNEL_MAC80211_DEBUG_MENU - boolean - -config ADK_KERNEL_MAC80211_DEBUGFS - boolean - -config ADK_KPACKAGE_KMOD_MAC80211 - tristate - select ADK_KERNEL_WIRELESS - select ADK_KERNEL_WLAN_80211 - select ADK_KERNEL_MOD_CFG80211 - select ADK_KERNEL_MOD_LIB80211 - select ADK_KPACKAGE_KMOD_CRYPTO_AES - select ADK_KPACKAGE_KMOD_CRYPTO_ECB - select ADK_KPACKAGE_KMOD_CRYPTO_ARC4 - select ADK_KPACKAGE_KMOD_RFKILL - -config ADK_DEBUG_MAC80211 - boolean - select ADK_KERNEL_MAC80211_VERBOSE_DEBUG - select ADK_KERNEL_MAC80211_DEBUGFS - select ADK_KERNEL_DEBUG_FS - -menu "Wireless card support" -depends on ADK_TARGET_WITH_CARDBUS || ADK_TARGET_WITH_PCMCIA || ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_AHB - -config ADK_KPACKAGE_KMOD_ATH5K - prompt "kmod-ath5k................... Atheros 5xxx wireless cards" - tristate - select ADK_KERNEL_MAC80211_LEDS - select ADK_KERNEL_ATH_CARDS - select ADK_KERNEL_ATH_COMMON - select ADK_KPACKAGE_KMOD_MAC80211 - depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_AHB - default y if ADK_TARGET_SYSTEM_IBM_X40 - default y if ADK_TARGET_SYSTEM_FON_FON2100 - default n - help - Driver for Atheros 5xxx/24xx cards. - -config ADK_KERNEL_ATH5K_DEBUG - prompt "enable debugging info via debugfs" - boolean - select ADK_DEBUG_MAC80211 - depends on ADK_KPACKAGE_KMOD_ATH5K - default n - help - Atheros 5xxx debugging messages. - Say Y, if and you will get debug options for ath5k. - To use this, you need to mount debugfs: - mkdir /debug/ - mount -t debugfs debug /debug/ - You will get access to files under: - /debug/ath5k/phy0/ - To enable debug, pass the debug level to the debug module - parameter. For example: - insmod ath5k.ko debug=0x00000400 - -config ADK_KPACKAGE_KMOD_B43 - prompt "kmod-b43..................... Broadcom B43xx wireless cards" - tristate - select ADK_PACKAGE_B43_FIRMWARE - select ADK_KPACKAGE_KMOD_FW_LOADER - select ADK_KPACKAGE_KMOD_MAC80211 - depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI - default n - help - Driver for Broadcom B43xx wireless chips. - -config ADK_KPACKAGE_KMOD_B43LEGACY - prompt "kmod-b43legacy............... Broadcom B43xx (legacy) wireless cards" - tristate - select ADK_PACKAGE_B43_FIRMWARE - select ADK_KPACKAGE_KMOD_FW_LOADER - select ADK_KPACKAGE_KMOD_MAC80211 - depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI - default n - help - Driver for Broadcom B43xx wireless chips. - -config ADK_KPACKAGE_KMOD_HOSTAP - prompt "kmod-hostap.................. HostAP driver" - tristate - select ADK_KPACKAGE_KMOD_MAC80211 - default n - depends on ADK_TARGET_WITH_PCMCIA - help - HostAP Driver for wireless chips. - -config ADK_KPACKAGE_KMOD_HOSTAP_CS - prompt "kmod-hostap-cs................ HostAP driver for PC Cards" - tristate - select ADK_KPACKAGE_KMOD_HOSTAP - depends on ADK_TARGET_WITH_PCMCIA - default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS - default n - help - HostAP CS Driver for wireless chips. - -config ADK_KPACKAGE_KMOD_RTL8187 - prompt "kmod-rtl8187................. Realtek RTL8187/RTL8187B wireless cards" - tristate - depends on ADK_TARGET_WITH_USB - select ADK_KPACKAGE_KMOD_MAC80211 - select ADK_KPACKAGE_KMOD_EEPROM_93CX6 - default n - help - Driver for Realtek RTL8187/RTL8187B wireless chips. - -config ADK_KPACKAGE_KMOD_P54_USB - prompt "kmod-p54-usb................. Prism54 USB support" - tristate - select ADK_KPACKAGE_KMOD_P54_COMMON - select ADK_KPACKAGE_KMOD_FW_LOADER - select ADK_PACKAGE_P54_FIRMWARE - select ADK_KERNEL_EXPERIMENTAL - select ADK_KPACKAGE_KMOD_MAC80211 - select ADK_KPACKAGE_KMOD_CRC_CCITT - depends on ADK_PACKAGE_KMOD_USB_CONTROLLER - default n - help - Driver for Prism54 USB adaptors. - -config ADK_KPACKAGE_KMOD_RT2800USB - prompt "kmod-rt2800-usb.............. Ralink rt2800 USB" - tristate - select ADK_KERNEL_RT2X00 - select ADK_KERNEL_RT2800USB_RT3573 - select ADK_KERNEL_RT2800USB_RT53XX - select ADK_KERNEL_RT2800USB_RT55XX - select ADK_KERNEL_RT2800USB_UNKNOWN - select ADK_KPACKAGE_KMOD_RT2X00_LIB_USB - select ADK_KPACKAGE_KMOD_MAC80211 - select ADK_KPACKAGE_KMOD_CRC_CCITT - depends on ADK_PACKAGE_KMOD_USB_CONTROLLER - default n - help - Driver for Ralink RT2800 USB. - -config ADK_KPACKAGE_KMOD_RTL8192CU - prompt "kmod-rtl8192cu............... Realtek RTL8192CU USB" - tristate - select ADK_KERNEL_RTL_CARDS - select ADK_KPACKAGE_KMOD_MAC80211 - select ADK_KPACKAGE_KMOD_FW_LOADER - select ADK_PACKAGE_REALTEK_FIRMWARE - depends on ADK_PACKAGE_KMOD_USB_CONTROLLER - default n - help - Driver for Realtek RTL8192CU USB - -config ADK_KPACKAGE_KMOD_RT2400PCI - prompt "kmod-rt2400pci............... Ralink rt2400" - tristate - select ADK_KERNEL_RT2X00 - select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI - select ADK_KPACKAGE_KMOD_MAC80211 - select ADK_KERNEL_MAC80211_LEDS - depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI - default n - help - This adds support for rt2400 wireless chipset family. - Supported chips: RT2460. - -config ADK_KPACKAGE_KMOD_RT2500PCI - prompt "kmod-rt2500pci............... Ralink rt2500" - tristate - select ADK_KERNEL_RT2X00 - select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI - select ADK_KPACKAGE_KMOD_MAC80211 - select ADK_KERNEL_MAC80211_LEDS - depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI - default n - help - This adds support for rt2500 wireless chipset family. - Supported chips: RT2560. - -config ADK_KPACKAGE_KMOD_RT61PCI - prompt "kmod-rt61pci................. Ralink rt2501/rt61" - tristate - select ADK_KERNEL_RT2X00 - select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI - select ADK_KPACKAGE_KMOD_MAC80211 - select ADK_KERNEL_MAC80211_LEDS - select ADK_KPACKAGE_KMOD_CRC_ITU_T - select ADK_PACKAGE_RT61_FIRMWARE - depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI - default n - help - This adds support for rt2501 wireless chipset family. - Supported chips: RT2561, RT2561S & RT2661. - -config ADK_KERNEL_RT2X00_DEBUG - prompt "enable debugging info" - boolean - select ADK_DEBUG_MAC80211 - depends on ADK_KPACKAGE_KMOD_RT61PCI || \ - ADK_KPACKAGE_KMOD_RT2500PCI || \ - ADK_KPACKAGE_KMOD_RT2400PCI - default n - help - -endmenu -endmenu +source "target/linux/config/Config.in.ethernet" +source "target/linux/config/Config.in.wireless" diff --git a/target/linux/config/Config.in.wireless b/target/linux/config/Config.in.wireless new file mode 100644 index 000000000..5cc0fbf73 --- /dev/null +++ b/target/linux/config/Config.in.wireless @@ -0,0 +1,275 @@ +config ADK_KERNEL_WLAN + boolean + +config ADK_KERNEL_WIRELESS + select ADK_KERNEL_WLAN + boolean + +config ADK_KERNEL_WIRELESS_EXT + boolean + +config ADK_KPACKAGE_KMOD_RFKILL + tristate + +config ADK_KERNEL_MAC80211_LEDS + boolean + select ADK_KPACKAGE_KMOD_LEDS_CLASS + select ADK_KERNEL_NEW_LEDS + select ADK_KERNEL_LEDS_TRIGGERS + +config ADK_KERNEL_WLAN_80211 + boolean + +config ADK_KPACKAGE_KMOD_RT2X00 + tristate + +config ADK_KPACKAGE_KMOD_RT2X00_LIB_USB + tristate + +config ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI + tristate + +config ADK_KERNEL_RTL_CARDS + boolean + +config ADK_KERNEL_RT2X00 + boolean + select ADK_KPACKAGE_KMOD_RT2X00 + select ADK_KPACKAGE_KMOD_FW_LOADER + select ADK_KPACKAGE_KMOD_EEPROM_93CX6 + +config ADK_KERNEL_RT2800USB_RT3573 + boolean + +config ADK_KERNEL_RT2800USB_RT53XX + boolean + +config ADK_KERNEL_RT2800USB_RT55XX + boolean + +config ADK_KERNEL_RT2800USB_UNKNOWN + boolean + +config ADK_KERNEL_MOD_CFG80211 + tristate + +config ADK_KERNEL_MOD_LIB80211 + select ADK_KPACKAGE_KMOD_CRYPTO_MICHAEL_MIC + tristate + +config ADK_KERNEL_CFG80211_WEXT + boolean + +config ADK_KERNEL_ATH_COMMON + tristate + +config ADK_KPACKAGE_KMOD_P54_COMMON + tristate + +config ADK_KERNEL_MAC80211_DEBUG_MENU + boolean + +config ADK_KERNEL_MAC80211_VERBOSE_DEBUG + select ADK_KERNEL_MAC80211_DEBUG_MENU + boolean + +config ADK_KERNEL_MAC80211_DEBUGFS + boolean + +config ADK_KPACKAGE_KMOD_MAC80211 + tristate + select ADK_KERNEL_WIRELESS + select ADK_KERNEL_WLAN_80211 + select ADK_KERNEL_MOD_CFG80211 + select ADK_KERNEL_MOD_LIB80211 + select ADK_KPACKAGE_KMOD_CRYPTO_AES + select ADK_KPACKAGE_KMOD_CRYPTO_ECB + select ADK_KPACKAGE_KMOD_CRYPTO_ARC4 + select ADK_KPACKAGE_KMOD_RFKILL + +config ADK_DEBUG_MAC80211 + boolean + select ADK_KERNEL_MAC80211_VERBOSE_DEBUG + select ADK_KERNEL_MAC80211_DEBUGFS + select ADK_KERNEL_DEBUG_FS + +menu "Wireless network card support" +depends on ADK_TARGET_WITH_CARDBUS || ADK_TARGET_WITH_PCMCIA || ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_AHB || ADK_TARGET_WITH_SDIO + +config ADK_KPACKAGE_KMOD_ATH5K + prompt "kmod-ath5k................... Atheros 5xxx wireless cards" + tristate + select ADK_KERNEL_MAC80211_LEDS + select ADK_KERNEL_ATH_CARDS + select ADK_KERNEL_ATH_COMMON + select ADK_KPACKAGE_KMOD_MAC80211 + depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_AHB + default y if ADK_TARGET_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_FON_FON2100 + default n + help + Driver for Atheros 5xxx/24xx cards. + +config ADK_KERNEL_ATH5K_DEBUG + prompt "enable debugging info via debugfs" + boolean + select ADK_DEBUG_MAC80211 + depends on ADK_KPACKAGE_KMOD_ATH5K + default n + help + Atheros 5xxx debugging messages. + Say Y, if and you will get debug options for ath5k. + To use this, you need to mount debugfs: + mkdir /debug/ + mount -t debugfs debug /debug/ + You will get access to files under: + /debug/ath5k/phy0/ + To enable debug, pass the debug level to the debug module + parameter. For example: + insmod ath5k.ko debug=0x00000400 + +config ADK_KPACKAGE_KMOD_B43 + prompt "kmod-b43..................... Broadcom B43xx wireless cards" + tristate + select ADK_PACKAGE_B43_FIRMWARE + select ADK_KPACKAGE_KMOD_FW_LOADER + select ADK_KPACKAGE_KMOD_MAC80211 + depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI + default n + help + Driver for Broadcom B43xx wireless chips. + +config ADK_KPACKAGE_KMOD_B43LEGACY + prompt "kmod-b43legacy............... Broadcom B43xx (legacy) wireless cards" + tristate + select ADK_PACKAGE_B43_FIRMWARE + select ADK_KPACKAGE_KMOD_FW_LOADER + select ADK_KPACKAGE_KMOD_MAC80211 + depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI + default n + help + Driver for Broadcom B43xx wireless chips. + +config ADK_KPACKAGE_KMOD_HOSTAP + prompt "kmod-hostap.................. HostAP driver" + tristate + select ADK_KPACKAGE_KMOD_MAC80211 + default n + depends on ADK_TARGET_WITH_PCMCIA + help + HostAP Driver for wireless chips. + +config ADK_KPACKAGE_KMOD_HOSTAP_CS + prompt "kmod-hostap-cs................ HostAP driver for PC Cards" + tristate + select ADK_KPACKAGE_KMOD_HOSTAP + depends on ADK_TARGET_WITH_PCMCIA + default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS + default n + help + HostAP CS Driver for wireless chips. + +config ADK_KPACKAGE_KMOD_RTL8187 + prompt "kmod-rtl8187................. Realtek RTL8187/RTL8187B wireless cards" + tristate + depends on ADK_TARGET_WITH_USB + select ADK_KPACKAGE_KMOD_MAC80211 + select ADK_KPACKAGE_KMOD_EEPROM_93CX6 + default n + help + Driver for Realtek RTL8187/RTL8187B wireless chips. + +config ADK_KPACKAGE_KMOD_P54_USB + prompt "kmod-p54-usb................. Prism54 USB support" + tristate + select ADK_KPACKAGE_KMOD_P54_COMMON + select ADK_KPACKAGE_KMOD_FW_LOADER + select ADK_PACKAGE_P54_FIRMWARE + select ADK_KERNEL_EXPERIMENTAL + select ADK_KPACKAGE_KMOD_MAC80211 + select ADK_KPACKAGE_KMOD_CRC_CCITT + depends on ADK_PACKAGE_KMOD_USB_CONTROLLER + default n + help + Driver for Prism54 USB adaptors. + +config ADK_KPACKAGE_KMOD_RT2800USB + prompt "kmod-rt2800-usb.............. Ralink rt2800 USB" + tristate + select ADK_KERNEL_RT2X00 + select ADK_KERNEL_RT2800USB_RT3573 + select ADK_KERNEL_RT2800USB_RT53XX + select ADK_KERNEL_RT2800USB_RT55XX + select ADK_KERNEL_RT2800USB_UNKNOWN + select ADK_KPACKAGE_KMOD_RT2X00_LIB_USB + select ADK_KPACKAGE_KMOD_MAC80211 + select ADK_KPACKAGE_KMOD_CRC_CCITT + depends on ADK_PACKAGE_KMOD_USB_CONTROLLER + default n + help + Driver for Ralink RT2800 USB. + +config ADK_KPACKAGE_KMOD_RTL8192CU + prompt "kmod-rtl8192cu............... Realtek RTL8192CU USB" + tristate + select ADK_KERNEL_RTL_CARDS + select ADK_KPACKAGE_KMOD_MAC80211 + select ADK_KPACKAGE_KMOD_FW_LOADER + select ADK_PACKAGE_REALTEK_FIRMWARE + depends on ADK_PACKAGE_KMOD_USB_CONTROLLER + default n + help + Driver for Realtek RTL8192CU USB + +config ADK_KPACKAGE_KMOD_RT2400PCI + prompt "kmod-rt2400pci............... Ralink rt2400" + tristate + select ADK_KERNEL_RT2X00 + select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI + select ADK_KPACKAGE_KMOD_MAC80211 + select ADK_KERNEL_MAC80211_LEDS + depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI + default n + help + This adds support for rt2400 wireless chipset family. + Supported chips: RT2460. + +config ADK_KPACKAGE_KMOD_RT2500PCI + prompt "kmod-rt2500pci............... Ralink rt2500" + tristate + select ADK_KERNEL_RT2X00 + select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI + select ADK_KPACKAGE_KMOD_MAC80211 + select ADK_KERNEL_MAC80211_LEDS + depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI + default n + help + This adds support for rt2500 wireless chipset family. + Supported chips: RT2560. + +config ADK_KPACKAGE_KMOD_RT61PCI + prompt "kmod-rt61pci................. Ralink rt2501/rt61" + tristate + select ADK_KERNEL_RT2X00 + select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI + select ADK_KPACKAGE_KMOD_MAC80211 + select ADK_KERNEL_MAC80211_LEDS + select ADK_KPACKAGE_KMOD_CRC_ITU_T + select ADK_PACKAGE_RT61_FIRMWARE + depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI + default n + help + This adds support for rt2501 wireless chipset family. + Supported chips: RT2561, RT2561S & RT2661. + +config ADK_KERNEL_RT2X00_DEBUG + prompt "enable debugging info" + boolean + select ADK_DEBUG_MAC80211 + depends on ADK_KPACKAGE_KMOD_RT61PCI || \ + ADK_KPACKAGE_KMOD_RT2500PCI || \ + ADK_KPACKAGE_KMOD_RT2400PCI + default n + help + +endmenu |