split ethernet and wireless config, split qemu and hardware stuff

6 files changed, 618 insertions, 711 deletions

diff --git a/target/config/Config.in b/target/config/Config.in
index 96cce9aba..3d613bb1e 100644
--- a/target/config/Config.in
+++ b/target/config/Config.in
@@ -1,6 +1,9 @@
 # This file is part of the OpenADK project. OpenADK is copyrighted
 # material, please see the LICENCE file in the top-level directory.
 
+source "target/config/Config.in.hardware"
+source "target/config/Config.in.qemu"
+
 config ADK_TARGET_KERNEL_VMLINUZ
 	boolean
 
@@ -238,210 +241,10 @@ config ADK_TARGET_CUBOX_I1
 
 endchoice
 
-
-config ADK_QEMU_ARGS
-	string
-	default "-nographic" if ADK_TARGET_QEMU_WITHOUT_GRAPHIC
-
-menu "Qemu configuration"
-depends on ADK_HARDWARE_QEMU
-
-choice 
-prompt "Use a Bootloader"
-depends on ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86
-
-config ADK_TARGET_QEMU_WITHOUT_BOOTLOADER
-	boolean "do not use bootloader"
-
-config ADK_TARGET_QEMU_WITH_BOOTLOADER
-	boolean "use bootloader"
-	select ADK_PACKAGE_GRUB if ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86
-
-endchoice
-
-choice
-prompt "Qemu MICROBLAZE Emulation"
-depends on ADK_TARGET_SYSTEM_QEMU_MICROBLAZE || ADK_TARGET_SYSTEM_QEMU_MICROBLAZEEL
-
-config ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800
-	boolean "Xilinx Spartan S3ADSP1800"
-
-config ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605
-	boolean "Xilinx ml605"
-
-endchoice
-
-choice
-prompt "Qemu ARM Emulation"
-depends on ADK_TARGET_SYSTEM_QEMU_ARM || ADK_TARGET_SYSTEM_QEMU_ARMHF
-
-config ADK_TARGET_QEMU_ARM_MODEL_VEXPRESS_A9
-	boolean "ARM Ltd. Versatile Express for Cortex-A9"
-	select ADK_CPU_CORTEX_A9
-
-config ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB
-	boolean "ARM Ltd. Versatile/PB"
-	select ADK_soft_float
-	select ADK_eabi
-	select ADK_CPU_ARM926EJ_S
-	depends on ADK_TARGET_SYSTEM_QEMU_ARM
-
-config ADK_TARGET_QEMU_ARM_MODEL_SPITZ
-	boolean "Xscale PXA270 Spitz PDA"
-	select ADK_soft_float
-	select ADK_eabi
-	select ADK_CPU_XSCALE
-	depends on ADK_TARGET_SYSTEM_QEMU_ARM
-
-endchoice
-
-choice
-prompt "Qemu Emulation with permanent storage device (disk/flash)"
-depends on ADK_HARDWARE_QEMU
-default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_ARCHIVE
-default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_SQUASHFS
-default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_JFFS2
-
-config ADK_TARGET_QEMU_WITHOUT_BLOCK
-	boolean "disabled"
-
-config ADK_TARGET_QEMU_WITH_BLOCK
-	boolean "enabled"
-	select ADK_KERNEL_SCSI_SYM53C8XX_2 if ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB
-	select ADK_KERNEL_MTD_M25P80 if ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605 || ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800
-	select ADK_KERNEL_ATA_PIIX if ADK_LINUX_MIPS || ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64
-	select ADK_KERNEL_PATA_MACIO if ADK_TARGET_SYSTEM_QEMU_PPC
-	select ADK_KERNEL_SCSI_IBMVSCSI if ADK_TARGET_SYSTEM_QEMU_PPC64
-	select ADK_KERNEL_SCSI_SUNESP if ADK_TARGET_SYSTEM_QEMU_SPARC
-	select ADK_KERNEL_PATA_PLATFORM if ADK_LINUX_SH
-
-endchoice
-
-choice
-prompt "Qemu Emulation with graphical output"
-depends on ADK_HARDWARE_QEMU
-
-config ADK_TARGET_QEMU_WITHOUT_GRAPHIC
-	boolean "disabled"
-
-config ADK_TARGET_QEMU_WITH_GRAPHIC
-	boolean "enabled"
-	select ADK_KERNEL_VT
-	select ADK_KERNEL_VT_CONSOLE
-	select ADK_KERNEL_FONTS
-	select ADK_KERNEL_FONT_8x16
-	select ADK_KERNEL_FB
-	select ADK_KERNEL_FRAMEBUFFER_CONSOLE
-	select ADK_KERNEL_FB_SM501 if ADK_LINUX_SH
-	select ADK_KERNEL_FB_CIRRUS if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64
-	select ADK_KERNEL_FB_PXA if ADK_TARGET_QEMU_ARM_MODEL_SPITZ
-	select ADK_KERNEL_INPUT
-	select ADK_KERNEL_INPUT_KEYBOARD
-	select ADK_KERNEL_KEYBOARD_ATKBD if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64
-	select ADK_KERNEL_USB_HID if ADK_LINUX_SH
-	select ADK_KERNEL_USB_OHCI_HCD_PLATFORM if ADK_LINUX_SH
-
-endchoice
-
-choice
-prompt "Qemu Emulation using VirtIO drivers"
-depends on ADK_TARGET_SYSTEM_QEMU_SPARC64 || \
-		ADK_TARGET_SYSTEM_QEMU_I686 || \
-		ADK_TARGET_SYSTEM_QEMU_X86_64
-default ADK_TARGET_QEMU_WITH_VIRTIO if ADK_TARGET_SYSTEM_QEMU_SPARC64
-
-config ADK_TARGET_QEMU_WITHOUT_VIRTIO
-	boolean "disabled"
-
-config ADK_TARGET_QEMU_WITH_VIRTIO
-	boolean "enabled"
-	select ADK_KERNEL_BLK_DEV
-	select ADK_KERNEL_VIRTIO
-	select ADK_KERNEL_VIRTIO_PCI
-	select ADK_KERNEL_VIRTIO_NET
-	select ADK_KERNEL_VIRTIO_BLK
-
-endchoice
-
-endmenu
-
-# hardware features, do not use for qemu
-config ADK_TARGET_WITH_USB
-	boolean
-
-config ADK_TARGET_WITH_I2C
-	boolean
-
-config ADK_TARGET_WITH_PCI
-	boolean
-
-config ADK_TARGET_WITH_SSB
-	boolean
-
-config ADK_TARGET_WITH_AHB
-	boolean
-
-config ADK_TARGET_WITH_MINIPCI
-	boolean
-
-config ADK_TARGET_WITH_ACPI
-	boolean
-
-config ADK_TARGET_WITH_VGA
-	boolean
-
-config ADK_TARGET_WITH_NAND
-	boolean
-
-config ADK_TARGET_WITH_MTD
-	boolean
-
-config ADK_TARGET_WITH_GEODE_CRYPTO
-	boolean
-
-config ADK_TARGET_WITH_HDD
-	boolean
-
-config ADK_TARGET_WITH_SATA
-	boolean
-
-config ADK_TARGET_WITH_INPUT
-	boolean
-
-config ADK_TARGET_WITH_SOUND
-	boolean
-
-config ADK_TARGET_WITH_TOUCHSCREEN
-	boolean
-
-config ADK_TARGET_WITH_LEDS
-	boolean
-
-config ADK_TARGET_WITH_PP
-	boolean
-
-config ADK_TARGET_WITH_CARDBUS
-	boolean
-
-config ADK_TARGET_WITH_PCMCIA
-	boolean
-
-config ADK_TARGET_WITH_RTC
-	boolean
-
-config ADK_TARGET_WITH_WATCHDOG
-	boolean
-
-config ADK_TARGET_WITH_DSL
-	boolean
-
-config ADK_TARGET_WITH_USB_BOOT
-	boolean
-
+# global symbols
 config ADK_TARGET_KERNEL_MAY_64BIT
 	boolean
 
-# global symbols
 config ADK_TOOLCHAIN_ONLY
 	boolean
 
diff --git a/target/config/Config.in.hardware b/target/config/Config.in.hardware
new file mode 100644
index 000000000..0dd0c5f3d
--- /dev/null
+++ b/target/config/Config.in.hardware
@@ -0,0 +1,76 @@
+# hardware features, do not use for qemu
+config ADK_TARGET_WITH_USB
+	boolean
+
+config ADK_TARGET_WITH_I2C
+	boolean
+
+config ADK_TARGET_WITH_PCI
+	boolean
+
+config ADK_TARGET_WITH_SSB
+	boolean
+
+config ADK_TARGET_WITH_SDIO
+	boolean
+
+config ADK_TARGET_WITH_AHB
+	boolean
+
+config ADK_TARGET_WITH_MINIPCI
+	boolean
+
+config ADK_TARGET_WITH_ACPI
+	boolean
+
+config ADK_TARGET_WITH_VGA
+	boolean
+
+config ADK_TARGET_WITH_NAND
+	boolean
+
+config ADK_TARGET_WITH_MTD
+	boolean
+
+config ADK_TARGET_WITH_GEODE_CRYPTO
+	boolean
+
+config ADK_TARGET_WITH_HDD
+	boolean
+
+config ADK_TARGET_WITH_SATA
+	boolean
+
+config ADK_TARGET_WITH_INPUT
+	boolean
+
+config ADK_TARGET_WITH_SOUND
+	boolean
+
+config ADK_TARGET_WITH_TOUCHSCREEN
+	boolean
+
+config ADK_TARGET_WITH_LEDS
+	boolean
+
+config ADK_TARGET_WITH_PP
+	boolean
+
+config ADK_TARGET_WITH_CARDBUS
+	boolean
+
+config ADK_TARGET_WITH_PCMCIA
+	boolean
+
+config ADK_TARGET_WITH_RTC
+	boolean
+
+config ADK_TARGET_WITH_WATCHDOG
+	boolean
+
+config ADK_TARGET_WITH_DSL
+	boolean
+
+config ADK_TARGET_WITH_USB_BOOT
+	boolean
+
diff --git a/target/config/Config.in.qemu b/target/config/Config.in.qemu
new file mode 100644
index 000000000..71b0130e4
--- /dev/null
+++ b/target/config/Config.in.qemu
@@ -0,0 +1,125 @@
+config ADK_QEMU_ARGS
+	string
+	default "-nographic" if ADK_TARGET_QEMU_WITHOUT_GRAPHIC
+
+menu "Qemu configuration"
+depends on ADK_HARDWARE_QEMU
+
+choice 
+prompt "Use a Bootloader"
+depends on ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86
+
+config ADK_TARGET_QEMU_WITHOUT_BOOTLOADER
+	boolean "do not use bootloader"
+
+config ADK_TARGET_QEMU_WITH_BOOTLOADER
+	boolean "use bootloader"
+	select ADK_PACKAGE_GRUB if ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_LINUX_X86
+
+endchoice
+
+choice
+prompt "Qemu MICROBLAZE Emulation"
+depends on ADK_TARGET_SYSTEM_QEMU_MICROBLAZE || ADK_TARGET_SYSTEM_QEMU_MICROBLAZEEL
+
+config ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800
+	boolean "Xilinx Spartan S3ADSP1800"
+
+config ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605
+	boolean "Xilinx ml605"
+
+endchoice
+
+choice
+prompt "Qemu ARM Emulation"
+depends on ADK_TARGET_SYSTEM_QEMU_ARM || ADK_TARGET_SYSTEM_QEMU_ARMHF
+
+config ADK_TARGET_QEMU_ARM_MODEL_VEXPRESS_A9
+	boolean "ARM Ltd. Versatile Express for Cortex-A9"
+	select ADK_CPU_CORTEX_A9
+
+config ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB
+	boolean "ARM Ltd. Versatile/PB"
+	select ADK_soft_float
+	select ADK_eabi
+	select ADK_CPU_ARM926EJ_S
+	depends on ADK_TARGET_SYSTEM_QEMU_ARM
+
+config ADK_TARGET_QEMU_ARM_MODEL_SPITZ
+	boolean "Xscale PXA270 Spitz PDA"
+	select ADK_soft_float
+	select ADK_eabi
+	select ADK_CPU_XSCALE
+	depends on ADK_TARGET_SYSTEM_QEMU_ARM
+
+endchoice
+
+choice
+prompt "Qemu Emulation with permanent storage device (disk/flash)"
+depends on ADK_HARDWARE_QEMU
+default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_ARCHIVE
+default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_SQUASHFS
+default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_JFFS2
+
+config ADK_TARGET_QEMU_WITHOUT_BLOCK
+	boolean "disabled"
+
+config ADK_TARGET_QEMU_WITH_BLOCK
+	boolean "enabled"
+	select ADK_KERNEL_SCSI_SYM53C8XX_2 if ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB
+	select ADK_KERNEL_MTD_M25P80 if ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605 || ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800
+	select ADK_KERNEL_ATA_PIIX if ADK_LINUX_MIPS || ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64
+	select ADK_KERNEL_PATA_MACIO if ADK_TARGET_SYSTEM_QEMU_PPC
+	select ADK_KERNEL_SCSI_IBMVSCSI if ADK_TARGET_SYSTEM_QEMU_PPC64
+	select ADK_KERNEL_SCSI_SUNESP if ADK_TARGET_SYSTEM_QEMU_SPARC
+	select ADK_KERNEL_PATA_PLATFORM if ADK_LINUX_SH
+
+endchoice
+
+choice
+prompt "Qemu Emulation with graphical output"
+depends on ADK_HARDWARE_QEMU
+
+config ADK_TARGET_QEMU_WITHOUT_GRAPHIC
+	boolean "disabled"
+
+config ADK_TARGET_QEMU_WITH_GRAPHIC
+	boolean "enabled"
+	select ADK_KERNEL_VT
+	select ADK_KERNEL_VT_CONSOLE
+	select ADK_KERNEL_FONTS
+	select ADK_KERNEL_FONT_8x16
+	select ADK_KERNEL_FB
+	select ADK_KERNEL_FRAMEBUFFER_CONSOLE
+	select ADK_KERNEL_FB_SM501 if ADK_LINUX_SH
+	select ADK_KERNEL_FB_CIRRUS if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64
+	select ADK_KERNEL_FB_PXA if ADK_TARGET_QEMU_ARM_MODEL_SPITZ
+	select ADK_KERNEL_INPUT
+	select ADK_KERNEL_INPUT_KEYBOARD
+	select ADK_KERNEL_KEYBOARD_ATKBD if ADK_LINUX_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64
+	select ADK_KERNEL_USB_HID if ADK_LINUX_SH
+	select ADK_KERNEL_USB_OHCI_HCD_PLATFORM if ADK_LINUX_SH
+
+endchoice
+
+choice
+prompt "Qemu Emulation using VirtIO drivers"
+depends on ADK_TARGET_SYSTEM_QEMU_SPARC64 || \
+		ADK_TARGET_SYSTEM_QEMU_I686 || \
+		ADK_TARGET_SYSTEM_QEMU_X86_64
+default ADK_TARGET_QEMU_WITH_VIRTIO if ADK_TARGET_SYSTEM_QEMU_SPARC64
+
+config ADK_TARGET_QEMU_WITHOUT_VIRTIO
+	boolean "disabled"
+
+config ADK_TARGET_QEMU_WITH_VIRTIO
+	boolean "enabled"
+	select ADK_KERNEL_BLK_DEV
+	select ADK_KERNEL_VIRTIO
+	select ADK_KERNEL_VIRTIO_PCI
+	select ADK_KERNEL_VIRTIO_NET
+	select ADK_KERNEL_VIRTIO_BLK
+
+endchoice
+
+endmenu
diff --git a/target/linux/config/Config.in.ethernet b/target/linux/config/Config.in.ethernet
new file mode 100644
index 000000000..8d829efc2
--- /dev/null
+++ b/target/linux/config/Config.in.ethernet
@@ -0,0 +1,136 @@
+menu "Ethernet network devices support"
+comment "network driver for target system is included into kernel"
+
+config ADK_KERNEL_NET_ETHERNET
+	boolean
+
+config ADK_KERNEL_NET_VENDOR_NATSEMI
+	boolean
+
+config ADK_KERNEL_NET_VENDOR_8390
+	boolean
+
+config ADK_KERNEL_NET_VENDOR_REALTEK
+	boolean
+
+config ADK_KERNEL_NET_VENDOR_MARVELL
+	boolean
+
+config ADK_KERNEL_PHYLIB
+	boolean
+
+config ADK_KERNEL_MII
+	boolean
+
+config ADK_KERNEL_USB_USBNET
+	boolean
+
+config ADK_KERNEL_NET_PCI
+	boolean
+
+config ADK_KERNEL_NETDEV_1000
+	boolean
+
+config ADK_KERNEL_VIA_RHINE_MMIO
+	boolean
+
+config ADK_KERNEL_ATH_CARDS
+	boolean
+
+config ADK_KERNEL_USB_NET_SMSC95XX
+	boolean
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_USB_USBNET
+	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI
+	default n
+	help
+
+menu "Ethernet card support"
+depends on ADK_TARGET_WITH_PCI
+
+config ADK_KPACKAGE_KMOD_NE2K_PCI
+	prompt "kmod-net-ne2k-pci............. NE2000 PCI driver"
+	tristate
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_NET_PCI
+	select ADK_KERNEL_NET_VENDOR_NATSEMI
+	select ADK_KERNEL_NET_VENDOR_8390
+	select ADK_KERNEL_MII
+	default n
+	help
+	  NE2000 pci driver
+
+config ADK_KPACKAGE_KMOD_PCNET32
+	prompt "kmod-net-pcnet32.............. AMD PCNet32 PCI driver"
+	tristate
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_NET_PCI
+	select ADK_KERNEL_MII
+	default n
+	help
+	  AMD PCnet32 driver
+
+config ADK_KPACKAGE_KMOD_8139CP
+	prompt "kmod-net-rtl8139cp............ RTL8139C+ PCI driver"
+	tristate
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_NET_PCI
+	select ADK_KERNEL_NET_VENDOR_REALTEK
+	select ADK_KERNEL_MII
+	default n
+	help
+	  RTL8139C+ pci driver
+
+config ADK_KPACKAGE_KMOD_8139TOO
+	prompt "kmod-net-rtl8139.............. RTL8139 PCI driver"
+	tristate
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_NET_PCI
+	select ADK_KERNEL_MII
+	default n
+	help
+	  RTL8139 pci driver
+
+config ADK_KPACKAGE_KMOD_E100
+	prompt "kmod-net-e100................. Intel(R) PRO/100+ driver"
+	tristate
+	select ADK_KERNEL_NET_PCI
+	select ADK_KERNEL_MII
+	default n
+	help
+	  Intel(R) PRO/100+ cards kernel support
+
+config ADK_KPACKAGE_KMOD_E1000
+	prompt "kmod-net-e1000................ Intel(R) PRO/1000 Gigabit Ethernet driver"
+	tristate
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_NETDEV_1000
+	default n
+	help
+	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+	  adapters.  For more information on how to identify your adapter, go 
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+config ADK_KPACKAGE_KMOD_SKY2
+	prompt "kmod-net-sky2................. Marvell Yukon driver"
+	tristate
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_NETDEV_1000
+	select ADK_KERNEL_NET_VENDOR_MARVELL
+	default n
+	help
+
+config ADK_KPACKAGE_KMOD_R8169
+	prompt "kmod-net-r8169................ RTL8169 driver"
+	tristate
+	select ADK_KERNEL_NET_ETHERNET
+	select ADK_KERNEL_NETDEV_1000
+	select ADK_KERNEL_MII
+	select ADK_KPACKAGE_KMOD_FW_LOADER
+	default n
+	help
+
+endmenu
+endmenu
diff --git a/target/linux/config/Config.in.netdevice b/target/linux/config/Config.in.netdevice
index 64bfb15f4..4a6d6b781 100644
--- a/target/linux/config/Config.in.netdevice
+++ b/target/linux/config/Config.in.netdevice
@@ -1,510 +1,2 @@
-menu "Network devices support"
-comment "Ethernet network driver for target system is included into kernel"
-
-config ADK_KERNEL_NET_ETHERNET
-	boolean
-
-config ADK_KERNEL_NET_VENDOR_NATSEMI
-	boolean
-
-config ADK_KERNEL_NET_VENDOR_8390
-	boolean
-
-config ADK_KERNEL_NET_VENDOR_REALTEK
-	boolean
-
-config ADK_KERNEL_NET_VENDOR_MARVELL
-	boolean
-
-config ADK_KERNEL_PHYLIB
-	boolean
-
-config ADK_KERNEL_MII
-	boolean
-
-config ADK_KERNEL_USB_USBNET
-	boolean
-
-config ADK_KERNEL_NET_PCI
-	boolean
-
-config ADK_KERNEL_NETDEV_1000
-	boolean
-
-config ADK_KERNEL_VIA_RHINE_MMIO
-	boolean
-
-config ADK_KERNEL_ATH_CARDS
-	boolean
-
-config ADK_KERNEL_CPMAC
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default y if ADK_TARGET_SYSTEM_LINKSYS_AG241
-	default n
-	help
-
-config ADK_KERNEL_MACB
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
-	default y if ADK_TARGET_SYSTEM_ATMEL_NGW100
-	default n
-	help
-
-config ADK_KERNEL_PCNET32
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default n
-	help
-
-config ADK_KERNEL_NATSEMI
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default y if ADK_TARGET_SYSTEM_PCENGINES_WRAP
-	default n
-	help
-
-config ADK_KERNEL_VIA_RHINE
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532
-	default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C
-	default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2
-	default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13
-	default n
-	help
-
-config ADK_KERNEL_AR231X_ETHERNET
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	select ADK_KERNEL_PHYLIB
-	default y if ADK_TARGET_SYSTEM_FON_FON2100
-	default n
-	help
-
-config ADK_KERNEL_KORINA
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532
-	default n
-	help
-
-config ADK_KERNEL_AG71XX
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	select ADK_KERNEL_NETDEV_1000
-	default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
-	default n
-	help
-
-config ADK_KERNEL_B44
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default y if ADK_TARGET_SYSTEM_BROADCOM_BCM47XX
-	default n
-	help
-
-config ADK_KERNEL_R8169
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NETDEV_1000
-	select ADK_KERNEL_MII
-	select ADK_KPACKAGE_KMOD_FW_LOADER
-	default n
-	help
-
-config ADK_KERNEL_USB_NET_SMSC95XX
-	boolean
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_USB_USBNET
-	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI
-	default n
-	help
-
-menu "Ethernet card support"
-depends on ADK_TARGET_WITH_PCI
-
-config ADK_KPACKAGE_KMOD_NE2K_PCI
-	prompt "kmod-net-ne2k-pci............. NE2000 PCI driver"
-	tristate
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_NET_VENDOR_NATSEMI
-	select ADK_KERNEL_NET_VENDOR_8390
-	select ADK_KERNEL_MII
-	default n
-	help
-	  NE2000 pci driver
-
-config ADK_KPACKAGE_KMOD_PCNET32
-	prompt "kmod-net-pcnet32.............. AMD PCNet32 PCI driver"
-	tristate
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default n
-	help
-	  AMD PCnet32 driver
-
-config ADK_KPACKAGE_KMOD_8139CP
-	prompt "kmod-net-rtl8139cp............ RTL8139C+ PCI driver"
-	tristate
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_NET_VENDOR_REALTEK
-	select ADK_KERNEL_MII
-	default n
-	help
-	  RTL8139C+ pci driver
-
-config ADK_KPACKAGE_KMOD_8139TOO
-	prompt "kmod-net-rtl8139.............. RTL8139 PCI driver"
-	tristate
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default n
-	help
-	  RTL8139 pci driver
-
-config ADK_KPACKAGE_KMOD_E100
-	prompt "kmod-net-e100................. Intel(R) PRO/100+ driver"
-	tristate
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default n
-	help
-	  Intel(R) PRO/100+ cards kernel support
-
-config ADK_KPACKAGE_KMOD_E1000
-	prompt "kmod-net-e1000................ Intel(R) PRO/1000 Gigabit Ethernet driver"
-	tristate
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NETDEV_1000
-	depends on !ADK_KERNEL_E1000
-	default n
-	help
-	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
-	  adapters.  For more information on how to identify your adapter, go 
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-config ADK_KPACKAGE_KMOD_SKY2
-	prompt "kmod-net-sky2................. Marvell Yukon driver"
-	tristate
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NETDEV_1000
-	select ADK_KERNEL_NET_VENDOR_MARVELL
-	depends on !ADK_KERNEL_SKY2
-	default n
-	help
-
-config ADK_KPACKAGE_KMOD_R8169
-	prompt "kmod-net-r8169................ RTL8169 driver"
-	tristate
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NETDEV_1000
-	select ADK_KERNEL_MII
-	select ADK_KPACKAGE_KMOD_FW_LOADER
-	depends on !ADK_KERNEL_R8169
-	default n
-	help
-
-endmenu
-
-config ADK_KERNEL_WLAN
-	boolean
-
-config ADK_KERNEL_WIRELESS
-	select ADK_KERNEL_WLAN
-	boolean
-
-config ADK_KERNEL_WIRELESS_EXT
-	boolean
-
-config ADK_KPACKAGE_KMOD_RFKILL
-	tristate
-	
-config ADK_KERNEL_MAC80211_LEDS
-	boolean
-	select ADK_KPACKAGE_KMOD_LEDS_CLASS
-	select ADK_KERNEL_NEW_LEDS
-	select ADK_KERNEL_LEDS_TRIGGERS
-
-config ADK_KERNEL_WLAN_80211
-	boolean
-
-config ADK_KPACKAGE_KMOD_RT2X00
-	tristate
-
-config ADK_KPACKAGE_KMOD_RT2X00_LIB_USB
-	tristate
-
-config ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
-	tristate
-
-config ADK_KERNEL_RTL_CARDS
-	boolean
-
-config ADK_KERNEL_RT2X00
-	boolean
-	select ADK_KPACKAGE_KMOD_RT2X00
-	select ADK_KPACKAGE_KMOD_FW_LOADER
-	select ADK_KPACKAGE_KMOD_EEPROM_93CX6
-
-config ADK_KERNEL_RT2800USB_RT3573
-	boolean
-
-config ADK_KERNEL_RT2800USB_RT53XX
-	boolean
-
-config ADK_KERNEL_RT2800USB_RT55XX
-	boolean
-
-config ADK_KERNEL_RT2800USB_UNKNOWN
-	boolean
-
-config ADK_KERNEL_MOD_CFG80211
-	tristate
-
-config ADK_KERNEL_MOD_LIB80211
-	select ADK_KPACKAGE_KMOD_CRYPTO_MICHAEL_MIC
-	tristate
-
-config ADK_KERNEL_CFG80211_WEXT
-	boolean
-
-config ADK_KERNEL_ATH_COMMON
-	tristate
-
-config ADK_KPACKAGE_KMOD_P54_COMMON
-	tristate
-
-config ADK_KERNEL_MAC80211_DEBUG_MENU
-	boolean
-
-config ADK_KERNEL_MAC80211_VERBOSE_DEBUG
-	select ADK_KERNEL_MAC80211_DEBUG_MENU
-	boolean
-
-config ADK_KERNEL_MAC80211_DEBUGFS
-	boolean
-
-config ADK_KPACKAGE_KMOD_MAC80211
-	tristate
-	select ADK_KERNEL_WIRELESS
-	select ADK_KERNEL_WLAN_80211
-	select ADK_KERNEL_MOD_CFG80211
-	select ADK_KERNEL_MOD_LIB80211
-	select ADK_KPACKAGE_KMOD_CRYPTO_AES
-	select ADK_KPACKAGE_KMOD_CRYPTO_ECB
-	select ADK_KPACKAGE_KMOD_CRYPTO_ARC4
-	select ADK_KPACKAGE_KMOD_RFKILL
-
-config ADK_DEBUG_MAC80211
-	boolean
-	select ADK_KERNEL_MAC80211_VERBOSE_DEBUG
-	select ADK_KERNEL_MAC80211_DEBUGFS
-	select ADK_KERNEL_DEBUG_FS
-
-menu "Wireless card support"
-depends on ADK_TARGET_WITH_CARDBUS || ADK_TARGET_WITH_PCMCIA || ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_AHB
-
-config ADK_KPACKAGE_KMOD_ATH5K
-	prompt "kmod-ath5k................... Atheros 5xxx wireless cards"
-	tristate
-	select ADK_KERNEL_MAC80211_LEDS
-	select ADK_KERNEL_ATH_CARDS
-	select ADK_KERNEL_ATH_COMMON
-	select ADK_KPACKAGE_KMOD_MAC80211
-	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_AHB
-	default y if ADK_TARGET_SYSTEM_IBM_X40
-	default y if ADK_TARGET_SYSTEM_FON_FON2100
-	default n
-	help
-	  Driver for Atheros 5xxx/24xx cards.
-
-config ADK_KERNEL_ATH5K_DEBUG
-	prompt "enable debugging info via debugfs"
-	boolean
-	select ADK_DEBUG_MAC80211
-	depends on ADK_KPACKAGE_KMOD_ATH5K
-	default n
-	help
-   	  Atheros 5xxx debugging messages.
-	  Say Y, if and you will get debug options for ath5k.
-	  To use this, you need to mount debugfs:
-	   mkdir /debug/
-	   mount -t debugfs debug /debug/  
-	  You will get access to files under:
-	   /debug/ath5k/phy0/
-          To enable debug, pass the debug level to the debug module
-	  parameter. For example:
-	   insmod ath5k.ko debug=0x00000400
-
-config ADK_KPACKAGE_KMOD_B43
-	prompt "kmod-b43..................... Broadcom B43xx wireless cards"
-	tristate
-	select ADK_PACKAGE_B43_FIRMWARE
-	select ADK_KPACKAGE_KMOD_FW_LOADER
-	select ADK_KPACKAGE_KMOD_MAC80211
-	depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI
-	default n
-	help
-	  Driver for Broadcom B43xx wireless chips.
-
-config ADK_KPACKAGE_KMOD_B43LEGACY
-	prompt "kmod-b43legacy............... Broadcom B43xx (legacy) wireless cards"
-	tristate
-	select ADK_PACKAGE_B43_FIRMWARE
-	select ADK_KPACKAGE_KMOD_FW_LOADER
-	select ADK_KPACKAGE_KMOD_MAC80211
-	depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI
-	default n
-	help
-	  Driver for Broadcom B43xx wireless chips.
-
-config ADK_KPACKAGE_KMOD_HOSTAP
-	prompt "kmod-hostap.................. HostAP driver"
-	tristate
-	select ADK_KPACKAGE_KMOD_MAC80211
-	default n
-	depends on ADK_TARGET_WITH_PCMCIA
-	help
-	  HostAP Driver for wireless chips.
-
-config ADK_KPACKAGE_KMOD_HOSTAP_CS
-	prompt "kmod-hostap-cs................ HostAP driver for PC Cards"
-	tristate
-	select ADK_KPACKAGE_KMOD_HOSTAP
-	depends on ADK_TARGET_WITH_PCMCIA
-	default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS
-	default n
-	help
-	  HostAP CS Driver for wireless chips.
-
-config ADK_KPACKAGE_KMOD_RTL8187
-	prompt "kmod-rtl8187................. Realtek RTL8187/RTL8187B wireless cards"
-	tristate
-	depends on ADK_TARGET_WITH_USB
-	select ADK_KPACKAGE_KMOD_MAC80211
-	select ADK_KPACKAGE_KMOD_EEPROM_93CX6
-	default n
-	help
-	  Driver for Realtek RTL8187/RTL8187B wireless chips.
-
-config ADK_KPACKAGE_KMOD_P54_USB
-	prompt "kmod-p54-usb................. Prism54 USB support"
-	tristate
-	select ADK_KPACKAGE_KMOD_P54_COMMON
-	select ADK_KPACKAGE_KMOD_FW_LOADER
-	select ADK_PACKAGE_P54_FIRMWARE
-	select ADK_KERNEL_EXPERIMENTAL
-	select ADK_KPACKAGE_KMOD_MAC80211
-	select ADK_KPACKAGE_KMOD_CRC_CCITT
-	depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
-	default n
-	help
-	  Driver for Prism54 USB adaptors.
-
-config ADK_KPACKAGE_KMOD_RT2800USB
-	prompt "kmod-rt2800-usb.............. Ralink rt2800 USB"
-	tristate
-	select ADK_KERNEL_RT2X00
-	select ADK_KERNEL_RT2800USB_RT3573
-	select ADK_KERNEL_RT2800USB_RT53XX
-	select ADK_KERNEL_RT2800USB_RT55XX
-	select ADK_KERNEL_RT2800USB_UNKNOWN
-	select ADK_KPACKAGE_KMOD_RT2X00_LIB_USB
-	select ADK_KPACKAGE_KMOD_MAC80211
-	select ADK_KPACKAGE_KMOD_CRC_CCITT
-	depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
-	default n
-	help
-	  Driver for Ralink RT2800 USB.
-
-config ADK_KPACKAGE_KMOD_RTL8192CU
-	prompt "kmod-rtl8192cu............... Realtek RTL8192CU USB"
-	tristate
-	select ADK_KERNEL_RTL_CARDS
-	select ADK_KPACKAGE_KMOD_MAC80211
-	select ADK_KPACKAGE_KMOD_FW_LOADER
-	select ADK_PACKAGE_REALTEK_FIRMWARE
-	depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
-	default n
-	help
-	  Driver for Realtek RTL8192CU USB
-
-config ADK_KPACKAGE_KMOD_RT2400PCI
-	prompt "kmod-rt2400pci............... Ralink rt2400"
-	tristate
-	select ADK_KERNEL_RT2X00
-	select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
-	select ADK_KPACKAGE_KMOD_MAC80211
-	select ADK_KERNEL_MAC80211_LEDS
-	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
-	default n
-	help
-	  This adds support for rt2400 wireless chipset family.
-	  Supported chips: RT2460.
-
-config ADK_KPACKAGE_KMOD_RT2500PCI
-	prompt "kmod-rt2500pci............... Ralink rt2500"
-	tristate
-	select ADK_KERNEL_RT2X00
-	select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
-	select ADK_KPACKAGE_KMOD_MAC80211
-	select ADK_KERNEL_MAC80211_LEDS
-	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
-	default n
-	help
-	  This adds support for rt2500 wireless chipset family.
-	  Supported chips: RT2560.
-
-config ADK_KPACKAGE_KMOD_RT61PCI
-	prompt "kmod-rt61pci................. Ralink rt2501/rt61"
-	tristate
-	select ADK_KERNEL_RT2X00
-	select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
-	select ADK_KPACKAGE_KMOD_MAC80211
-	select ADK_KERNEL_MAC80211_LEDS
-	select ADK_KPACKAGE_KMOD_CRC_ITU_T
-	select ADK_PACKAGE_RT61_FIRMWARE
-	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
-	default n
-	help
-	  This adds support for rt2501 wireless chipset family.
-	  Supported chips: RT2561, RT2561S & RT2661.
-
-config ADK_KERNEL_RT2X00_DEBUG
-	prompt "enable debugging info"
-	boolean
-	select ADK_DEBUG_MAC80211
-	depends on ADK_KPACKAGE_KMOD_RT61PCI || \
-		ADK_KPACKAGE_KMOD_RT2500PCI || \
-		ADK_KPACKAGE_KMOD_RT2400PCI	
-	default n
-	help
-
-endmenu
-endmenu
+source "target/linux/config/Config.in.ethernet"
+source "target/linux/config/Config.in.wireless"
diff --git a/target/linux/config/Config.in.wireless b/target/linux/config/Config.in.wireless
new file mode 100644
index 000000000..5cc0fbf73
--- /dev/null
+++ b/target/linux/config/Config.in.wireless
@@ -0,0 +1,275 @@
+config ADK_KERNEL_WLAN
+	boolean
+
+config ADK_KERNEL_WIRELESS
+	select ADK_KERNEL_WLAN
+	boolean
+
+config ADK_KERNEL_WIRELESS_EXT
+	boolean
+
+config ADK_KPACKAGE_KMOD_RFKILL
+	tristate
+	
+config ADK_KERNEL_MAC80211_LEDS
+	boolean
+	select ADK_KPACKAGE_KMOD_LEDS_CLASS
+	select ADK_KERNEL_NEW_LEDS
+	select ADK_KERNEL_LEDS_TRIGGERS
+
+config ADK_KERNEL_WLAN_80211
+	boolean
+
+config ADK_KPACKAGE_KMOD_RT2X00
+	tristate
+
+config ADK_KPACKAGE_KMOD_RT2X00_LIB_USB
+	tristate
+
+config ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
+	tristate
+
+config ADK_KERNEL_RTL_CARDS
+	boolean
+
+config ADK_KERNEL_RT2X00
+	boolean
+	select ADK_KPACKAGE_KMOD_RT2X00
+	select ADK_KPACKAGE_KMOD_FW_LOADER
+	select ADK_KPACKAGE_KMOD_EEPROM_93CX6
+
+config ADK_KERNEL_RT2800USB_RT3573
+	boolean
+
+config ADK_KERNEL_RT2800USB_RT53XX
+	boolean
+
+config ADK_KERNEL_RT2800USB_RT55XX
+	boolean
+
+config ADK_KERNEL_RT2800USB_UNKNOWN
+	boolean
+
+config ADK_KERNEL_MOD_CFG80211
+	tristate
+
+config ADK_KERNEL_MOD_LIB80211
+	select ADK_KPACKAGE_KMOD_CRYPTO_MICHAEL_MIC
+	tristate
+
+config ADK_KERNEL_CFG80211_WEXT
+	boolean
+
+config ADK_KERNEL_ATH_COMMON
+	tristate
+
+config ADK_KPACKAGE_KMOD_P54_COMMON
+	tristate
+
+config ADK_KERNEL_MAC80211_DEBUG_MENU
+	boolean
+
+config ADK_KERNEL_MAC80211_VERBOSE_DEBUG
+	select ADK_KERNEL_MAC80211_DEBUG_MENU
+	boolean
+
+config ADK_KERNEL_MAC80211_DEBUGFS
+	boolean
+
+config ADK_KPACKAGE_KMOD_MAC80211
+	tristate
+	select ADK_KERNEL_WIRELESS
+	select ADK_KERNEL_WLAN_80211
+	select ADK_KERNEL_MOD_CFG80211
+	select ADK_KERNEL_MOD_LIB80211
+	select ADK_KPACKAGE_KMOD_CRYPTO_AES
+	select ADK_KPACKAGE_KMOD_CRYPTO_ECB
+	select ADK_KPACKAGE_KMOD_CRYPTO_ARC4
+	select ADK_KPACKAGE_KMOD_RFKILL
+
+config ADK_DEBUG_MAC80211
+	boolean
+	select ADK_KERNEL_MAC80211_VERBOSE_DEBUG
+	select ADK_KERNEL_MAC80211_DEBUGFS
+	select ADK_KERNEL_DEBUG_FS
+
+menu "Wireless network card support"
+depends on ADK_TARGET_WITH_CARDBUS || ADK_TARGET_WITH_PCMCIA || ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_AHB || ADK_TARGET_WITH_SDIO
+
+config ADK_KPACKAGE_KMOD_ATH5K
+	prompt "kmod-ath5k................... Atheros 5xxx wireless cards"
+	tristate
+	select ADK_KERNEL_MAC80211_LEDS
+	select ADK_KERNEL_ATH_CARDS
+	select ADK_KERNEL_ATH_COMMON
+	select ADK_KPACKAGE_KMOD_MAC80211
+	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_AHB
+	default y if ADK_TARGET_SYSTEM_IBM_X40
+	default y if ADK_TARGET_SYSTEM_FON_FON2100
+	default n
+	help
+	  Driver for Atheros 5xxx/24xx cards.
+
+config ADK_KERNEL_ATH5K_DEBUG
+	prompt "enable debugging info via debugfs"
+	boolean
+	select ADK_DEBUG_MAC80211
+	depends on ADK_KPACKAGE_KMOD_ATH5K
+	default n
+	help
+   	  Atheros 5xxx debugging messages.
+	  Say Y, if and you will get debug options for ath5k.
+	  To use this, you need to mount debugfs:
+	   mkdir /debug/
+	   mount -t debugfs debug /debug/  
+	  You will get access to files under:
+	   /debug/ath5k/phy0/
+          To enable debug, pass the debug level to the debug module
+	  parameter. For example:
+	   insmod ath5k.ko debug=0x00000400
+
+config ADK_KPACKAGE_KMOD_B43
+	prompt "kmod-b43..................... Broadcom B43xx wireless cards"
+	tristate
+	select ADK_PACKAGE_B43_FIRMWARE
+	select ADK_KPACKAGE_KMOD_FW_LOADER
+	select ADK_KPACKAGE_KMOD_MAC80211
+	depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI
+	default n
+	help
+	  Driver for Broadcom B43xx wireless chips.
+
+config ADK_KPACKAGE_KMOD_B43LEGACY
+	prompt "kmod-b43legacy............... Broadcom B43xx (legacy) wireless cards"
+	tristate
+	select ADK_PACKAGE_B43_FIRMWARE
+	select ADK_KPACKAGE_KMOD_FW_LOADER
+	select ADK_KPACKAGE_KMOD_MAC80211
+	depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI
+	default n
+	help
+	  Driver for Broadcom B43xx wireless chips.
+
+config ADK_KPACKAGE_KMOD_HOSTAP
+	prompt "kmod-hostap.................. HostAP driver"
+	tristate
+	select ADK_KPACKAGE_KMOD_MAC80211
+	default n
+	depends on ADK_TARGET_WITH_PCMCIA
+	help
+	  HostAP Driver for wireless chips.
+
+config ADK_KPACKAGE_KMOD_HOSTAP_CS
+	prompt "kmod-hostap-cs................ HostAP driver for PC Cards"
+	tristate
+	select ADK_KPACKAGE_KMOD_HOSTAP
+	depends on ADK_TARGET_WITH_PCMCIA
+	default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS
+	default n
+	help
+	  HostAP CS Driver for wireless chips.
+
+config ADK_KPACKAGE_KMOD_RTL8187
+	prompt "kmod-rtl8187................. Realtek RTL8187/RTL8187B wireless cards"
+	tristate
+	depends on ADK_TARGET_WITH_USB
+	select ADK_KPACKAGE_KMOD_MAC80211
+	select ADK_KPACKAGE_KMOD_EEPROM_93CX6
+	default n
+	help
+	  Driver for Realtek RTL8187/RTL8187B wireless chips.
+
+config ADK_KPACKAGE_KMOD_P54_USB
+	prompt "kmod-p54-usb................. Prism54 USB support"
+	tristate
+	select ADK_KPACKAGE_KMOD_P54_COMMON
+	select ADK_KPACKAGE_KMOD_FW_LOADER
+	select ADK_PACKAGE_P54_FIRMWARE
+	select ADK_KERNEL_EXPERIMENTAL
+	select ADK_KPACKAGE_KMOD_MAC80211
+	select ADK_KPACKAGE_KMOD_CRC_CCITT
+	depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
+	default n
+	help
+	  Driver for Prism54 USB adaptors.
+
+config ADK_KPACKAGE_KMOD_RT2800USB
+	prompt "kmod-rt2800-usb.............. Ralink rt2800 USB"
+	tristate
+	select ADK_KERNEL_RT2X00
+	select ADK_KERNEL_RT2800USB_RT3573
+	select ADK_KERNEL_RT2800USB_RT53XX
+	select ADK_KERNEL_RT2800USB_RT55XX
+	select ADK_KERNEL_RT2800USB_UNKNOWN
+	select ADK_KPACKAGE_KMOD_RT2X00_LIB_USB
+	select ADK_KPACKAGE_KMOD_MAC80211
+	select ADK_KPACKAGE_KMOD_CRC_CCITT
+	depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
+	default n
+	help
+	  Driver for Ralink RT2800 USB.
+
+config ADK_KPACKAGE_KMOD_RTL8192CU
+	prompt "kmod-rtl8192cu............... Realtek RTL8192CU USB"
+	tristate
+	select ADK_KERNEL_RTL_CARDS
+	select ADK_KPACKAGE_KMOD_MAC80211
+	select ADK_KPACKAGE_KMOD_FW_LOADER
+	select ADK_PACKAGE_REALTEK_FIRMWARE
+	depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
+	default n
+	help
+	  Driver for Realtek RTL8192CU USB
+
+config ADK_KPACKAGE_KMOD_RT2400PCI
+	prompt "kmod-rt2400pci............... Ralink rt2400"
+	tristate
+	select ADK_KERNEL_RT2X00
+	select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
+	select ADK_KPACKAGE_KMOD_MAC80211
+	select ADK_KERNEL_MAC80211_LEDS
+	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
+	default n
+	help
+	  This adds support for rt2400 wireless chipset family.
+	  Supported chips: RT2460.
+
+config ADK_KPACKAGE_KMOD_RT2500PCI
+	prompt "kmod-rt2500pci............... Ralink rt2500"
+	tristate
+	select ADK_KERNEL_RT2X00
+	select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
+	select ADK_KPACKAGE_KMOD_MAC80211
+	select ADK_KERNEL_MAC80211_LEDS
+	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
+	default n
+	help
+	  This adds support for rt2500 wireless chipset family.
+	  Supported chips: RT2560.
+
+config ADK_KPACKAGE_KMOD_RT61PCI
+	prompt "kmod-rt61pci................. Ralink rt2501/rt61"
+	tristate
+	select ADK_KERNEL_RT2X00
+	select ADK_KPACKAGE_KMOD_RT2X00_LIB_PCI
+	select ADK_KPACKAGE_KMOD_MAC80211
+	select ADK_KERNEL_MAC80211_LEDS
+	select ADK_KPACKAGE_KMOD_CRC_ITU_T
+	select ADK_PACKAGE_RT61_FIRMWARE
+	depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
+	default n
+	help
+	  This adds support for rt2501 wireless chipset family.
+	  Supported chips: RT2561, RT2561S & RT2661.
+
+config ADK_KERNEL_RT2X00_DEBUG
+	prompt "enable debugging info"
+	boolean
+	select ADK_DEBUG_MAC80211
+	depends on ADK_KPACKAGE_KMOD_RT61PCI || \
+		ADK_KPACKAGE_KMOD_RT2500PCI || \
+		ADK_KPACKAGE_KMOD_RT2400PCI	
+	default n
+	help
+
+endmenu