qemu MIPS support

- add support of all MIPS variants
- MIPS32 boots fine with MALTA emulation
- MIPS64 has a problem booting in 64 kernel mode,
  even linux 2.6.30rc7 halt on boot
- remove Config.default

23 files changed, 3869 insertions, 54 deletions

diff --git a/target/Config.in b/target/Config.in
index 8db61ae76..f492b9a12 100644
--- a/target/Config.in
+++ b/target/Config.in
@@ -15,6 +15,15 @@ config ADK_qemu_x86
 config ADK_qemu_mips
 	tristate
 
+config ADK_qemu_mipsel
+	tristate
+
+config ADK_qemu_mips64
+	tristate
+
+config ADK_qemu_mips64el
+	tristate
+
 config ADK_qemu_cris
 	tristate
 
@@ -36,9 +45,6 @@ config ADK_foxboard
 config ADK_lemote
 	tristate
 
-config ADK_ibm_x40
-	tristate
-
 config ADK_rescue_x86
 	tristate
 
@@ -56,19 +62,25 @@ config ADK_DEVICE
 	default "alix1c"  if ADK_alix1c
 	default "qemu-x86"  if ADK_qemu_x86
 	default "qemu-mips"  if ADK_qemu_mips
+	default "qemu-mipsel"  if ADK_qemu_mipsel
+	default "qemu-mips64"  if ADK_qemu_mips64
+	default "qemu-mips64el"  if ADK_qemu_mips64el
 	default "qemu-cris"  if ADK_qemu_cris
 	default "foxboard"  if ADK_foxboard
 	default "rb532"  if ADK_rb532
 	default "rb411"  if ADK_rb411
 	default "rb433"  if ADK_rb433
 	default "zaurus"  if ADK_arm
-	default "ibm-x40"  if ADK_ibm_x40
 	default "lemote"  if ADK_lemote
 	default "rescue-x86"  if ADK_rescue_x86
 	default "rescue-x86_64"  if ADK_rescue_x86_64
 	default "rescue-mips"  if ADK_rescue_mips
 	default "rescue-mipsel"  if ADK_rescue_mipsel
 
+config ADK_LINUX_MIPS64
+	bool
+	default n	
+
 menu "Target system"
 
 choice
@@ -97,6 +109,7 @@ config ADK_LINUX_CRIS_FOXBOARD
 config ADK_LINUX_MIPS64_LEMOTE
 	bool "Lemote Subnotebook"
 	select ADK_lemote
+	select ADK_LINUX_MIPS64
 	help
 	  Lemote Subnotebook
 
@@ -134,12 +147,6 @@ config ADK_LINUX_XSCALE_ZAURUS
 	help
 	 Support for Sharp Zaurus SL-C3200 (aka Terrier)
 
-config ADK_LINUX_X86_IBM_X40
-	bool "IBM X40 Rescuesystem for encrypted Root/Swap"
-	select ADK_ibm_x40
-	help
-	 IBM X40 Rescuesystem
-
 config ADK_LINUX_RESCUE
 	bool "Minimal Linux Rescuesystem"
 	help
@@ -194,11 +201,31 @@ config ADK_LINUX_X86_QEMU
 	 Qemu support for x86 architecture.
 
 config ADK_LINUX_MIPS_QEMU
-	bool "mips (little endian)"
+	bool "mips (big endian)"
 	select ADK_qemu_mips
 	help
+	 Qemu support for MIPS BE architecture.
+
+config ADK_LINUX_MIPSEL_QEMU
+	bool "mipsel (little endian)"
+	select ADK_qemu_mipsel
+	help
 	 Qemu support for MIPS LE architecture.
 
+config ADK_LINUX_MIPS64_QEMU
+	bool "mips64 (big endian)"
+	select ADK_qemu_mips64
+	select ADK_LINUX_MIPS64
+	help
+	 Qemu support for MIPS64 BE architecture.
+
+config ADK_LINUX_MIPS64EL_QEMU
+	bool "mips64 (little endian)"
+	select ADK_qemu_mips64el
+	select ADK_LINUX_MIPS64
+	help
+	 Qemu support for MIPS64 LE architecture.
+
 config ADK_LINUX_CRIS_QEMU
 	bool "cris"
 	select ADK_qemu_cris
@@ -237,9 +264,15 @@ config ADK_TARGET_LIB_UCLIBC
 
 config ADK_TARGET_LIB_GLIBC
 	bool "GNU C library"
-	depends on ADK_LINUX_X86_IBM_X40 || ADK_LINUX_X86_QEMU || \
-		ADK_LINUX_X86_ALIX1C || ADK_LINUX_MIPS_RB411 || \
-		ADK_LINUX_MIPS_RB532 || ADK_LINUX_RESCUE || \
+	depends on ADK_LINUX_X86_QEMU || \
+		ADK_LINUX_MIPS_QEMU || \
+		ADK_LINUX_MIPS64_QEMU || \
+		ADK_LINUX_MIPSEL_QEMU || \
+		ADK_LINUX_MIPS64EL_QEMU || \
+		ADK_LINUX_X86_ALIX1C || \
+		ADK_LINUX_MIPS_RB411 || \
+		ADK_LINUX_MIPS_RB532 || \
+		ADK_LINUX_RESCUE || \
 		ADK_LINUX_MIPS64_LEMOTE
 	help
 	 http://www.gnu.org/libc
@@ -251,11 +284,16 @@ prompt "Target Firmware type"
 
 config ADK_TARGET_ROOTFS_INITRAMFS
 	bool "initramfs filesystem"
-	depends on ADK_LINUX_X86_IBM_X40 || ADK_LINUX_X86_QEMU || \
-		ADK_LINUX_CRIS_QEMU || ADK_LINUX_MIPS_QEMU || \
-		ADK_LINUX_RESCUE || ADK_LINUX_MIPS64_LEMOTE
+	depends on ADK_LINUX_X86_QEMU || \
+		ADK_LINUX_CRIS_QEMU || \
+		ADK_LINUX_MIPS_QEMU || \
+		ADK_LINUX_MIPSEL_QEMU || \
+		ADK_LINUX_MIPS64_QEMU || \
+		ADK_LINUX_MIPS64EL_QEMU || \
+		ADK_LINUX_RESCUE || \
+		ADK_LINUX_MIPS64_LEMOTE
 	help
-	  initramfs help...
+	  create an read-only initramfs system.
 
 config ADK_TARGET_ROOTFS_SQUASHFS
 	bool "squashfs read-only root filesystem"
@@ -265,8 +303,9 @@ config ADK_TARGET_ROOTFS_SQUASHFS
 
 config ADK_TARGET_ROOTFS_YAFFS
 	bool "YAFFS2 rootfilesystem (NAND)"
-	depends on ADK_LINUX_MIPS_RB532 || ADK_LINUX_MIPS_RB433 \
-		|| ADK_LINUX_MIPS_RB411
+	depends on ADK_LINUX_MIPS_RB532 || \
+		ADK_LINUX_MIPS_RB433 || \
+		ADK_LINUX_MIPS_RB411
 	help
 	  Root filesystem on NAND.
 
@@ -297,12 +336,11 @@ config ADK_TARGET_ROOTFS_EXT2_CF
 
 config ADK_TARGET_ROOTFS_EXT2
 	bool "read-write filesystem for qemu emulator"
-	depends on ADK_LINUX_X86_QEMU || ADK_LINUX_CRIS_QEMU || ADK_LINUX_MIPS_QEMU \
-		|| ADK_LINUX_XSCALE_ZAURUS
+	depends on ADK_LINUX_QEMU || \
+		ADK_LINUX_XSCALE_ZAURUS
 	select ADK_KERNEL_EXT2_FS
 	help
 	  Use this option if you compile for qemu.
-
 endchoice
 
 config ADK_SSP
diff --git a/target/qemu-mips/Makefile b/target/qemu-mips/Makefile
index ac4a70d91..a66bb5d17 100644
--- a/target/qemu-mips/Makefile
+++ b/target/qemu-mips/Makefile
@@ -19,12 +19,12 @@ imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
 	@echo "Use following command to create a QEMU Image:"
 	@echo "sudo ./scripts/create-image.sh -n qemu-mips.img $(BIN_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/${DEVICE}-${ARCH}-kernel -hda qemu-mips.img -append="root=/dev/hda1 init=/init"'
+	@echo 'qemu-system-mips -nographic -M malta -kernel $(BIN_DIR)/${DEVICE}-${ARCH}-kernel -hda qemu-mips.img -append="root=/dev/hda1 init=/init"'
 endif
 
 ifeq ($(FS),initramfs)
 imageinstall: $(BIN_DIR)/$(INITRAMFS)
 	@echo 'The kernel file is: ${BIN_DIR}/${DEVICE}-${ARCH}-kernel'
 	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
-	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/${DEVICE}-${ARCH}-kernel -initrd ${BIN_DIR}/${INITRAMFS} -append "init=/init"'
+	@echo 'qemu-system-mips -nographic -M malta -kernel $(BIN_DIR)/${DEVICE}-${ARCH}-kernel -initrd ${BIN_DIR}/${INITRAMFS} -append "init=/init"'
 endif
diff --git a/target/qemu-mips/device.mk b/target/qemu-mips/device.mk
index 9f912f207..48e5a2352 100644
--- a/target/qemu-mips/device.mk
+++ b/target/qemu-mips/device.mk
@@ -1,7 +1,7 @@
 ARCH:=			mips
-CPU_ARCH:=		mipsel
-KERNEL_VERSION:=	2.6.29.4
+CPU_ARCH:=		mips
+KERNEL_VERSION:=	2.6.29.1
 KERNEL_RELEASE:=	1
 KERNEL_MD5SUM:=		4ada43caecb08fe2af71b416b6f586d8
 TARGET_OPTIMIZATION:=	-Os -pipe
-TARGET_CFLAGS_ARCH:=    -march=mips32
+TARGET_CFLAGS_ARCH:=    -march=mips32 -mabi=32
diff --git a/target/qemu-mips/kernel.config b/target/qemu-mips/kernel.config
index 8a78fd922..d88cbf633 100644
--- a/target/qemu-mips/kernel.config
+++ b/target/qemu-mips/kernel.config
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29.4
-# Fri May 22 13:23:36 2009
+# Linux kernel version: 2.6.29.1
+# Fri May 29 17:54:14 2009
 #
 CONFIG_MIPS=y
 
@@ -74,8 +74,8 @@ CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
diff --git a/target/qemu-mips/uclibc.config b/target/qemu-mips/uclibc.config
index 223c3ddd9..b32f17451 100644
--- a/target/qemu-mips/uclibc.config
+++ b/target/qemu-mips/uclibc.config
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Version: 0.9.30
-# Fri Jan  9 14:41:23 2009
+# Version: 0.9.30.1
+# Fri May 29 17:00:25 2009
 #
 # TARGET_alpha is not set
 # TARGET_arm is not set
@@ -35,23 +35,6 @@ TARGET_mips=y
 TARGET_ARCH="mips"
 FORCE_OPTIONS_FOR_ARCH=y
 ARCH_CFLAGS="-mno-split-addresses"
-# CONFIG_GENERIC_386 is not set
-# CONFIG_386 is not set
-# CONFIG_486 is not set
-# CONFIG_586 is not set
-# CONFIG_586MMX is not set
-# CONFIG_686 is not set
-# CONFIG_PENTIUMII is not set
-# CONFIG_PENTIUMIII is not set
-# CONFIG_PENTIUM4 is not set
-# CONFIG_K6 is not set
-# CONFIG_K7 is not set
-# CONFIG_ELAN is not set
-# CONFIG_CRUSOE is not set
-# CONFIG_WINCHIPC6 is not set
-# CONFIG_WINCHIP2 is not set
-# CONFIG_CYRIXIII is not set
-# CONFIG_NEHEMIAH is not set
 CONFIG_MIPS_O32_ABI=y
 # CONFIG_MIPS_N32_ABI is not set
 # CONFIG_MIPS_N64_ABI is not set
@@ -68,9 +51,9 @@ TARGET_SUBARCH=""
 # Using ELF file format
 #
 ARCH_ANY_ENDIAN=y
-ARCH_LITTLE_ENDIAN=y
-# ARCH_WANTS_BIG_ENDIAN is not set
-ARCH_WANTS_LITTLE_ENDIAN=y
+ARCH_BIG_ENDIAN=y
+ARCH_WANTS_BIG_ENDIAN=y
+# ARCH_WANTS_LITTLE_ENDIAN is not set
 ARCH_HAS_MMU=y
 ARCH_USE_MMU=y
 UCLIBC_HAS_FLOATS=y
diff --git a/target/qemu-mips64/Makefile b/target/qemu-mips64/Makefile
new file mode 100644
index 000000000..a2d09610d
--- /dev/null
+++ b/target/qemu-mips64/Makefile
@@ -0,0 +1,30 @@
+# $Id: Makefile 30 2008-09-04 13:31:09Z wbx $
+#-
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+include $(TOPDIR)/mk/kernel.mk
+include $(TOPDIR)/mk/modules.mk
+include $(TOPDIR)/mk/kernel-build.mk
+include $(TOPDIR)/mk/image.mk
+
+kernel-install:
+	cp $(LINUX_DIR)/vmlinux $(BIN_DIR)/${DEVICE}-${ARCH}-kernel
+
+ifeq ($(FS),ext2)
+imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
+	@echo
+	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL),"
+	@echo "Use following command to create a QEMU Image:"
+	@echo "sudo ./scripts/create-image.sh -n qemu-mips.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "Start qemu with following options:"
+	@echo 'qemu-system-mips64 -nographic -M malta -kernel $(BIN_DIR)/${DEVICE}-${ARCH}-kernel -hda qemu-mips.img -append="root=/dev/hda1 init=/init"'
+endif
+
+ifeq ($(FS),initramfs)
+imageinstall: $(BIN_DIR)/$(INITRAMFS)
+	@echo 'The kernel file is: ${BIN_DIR}/${DEVICE}-${ARCH}-kernel'
+	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-mips64 -nographic -M malta -kernel $(BIN_DIR)/${DEVICE}-${ARCH}-kernel -initrd ${BIN_DIR}/${INITRAMFS} -append "init=/init"'
+endif
diff --git a/target/qemu-mips64/device.mk b/target/qemu-mips64/device.mk
new file mode 100644
index 000000000..b5546db6c
--- /dev/null
+++ b/target/qemu-mips64/device.mk
@@ -0,0 +1,7 @@
+ARCH:=			mips
+CPU_ARCH:=		mips64
+KERNEL_VERSION:=	2.6.29.1
+KERNEL_RELEASE:=	1
+KERNEL_MD5SUM:=		4ada43caecb08fe2af71b416b6f586d8
+TARGET_OPTIMIZATION:=	-Os -pipe
+TARGET_CFLAGS_ARCH:=    -march=mips64 -mabi=64
diff --git a/target/qemu-mips64/files/etc/mdev.conf b/target/qemu-mips64/files/etc/mdev.conf
new file mode 100644
index 000000000..a8b87c84c
--- /dev/null
+++ b/target/qemu-mips64/files/etc/mdev.conf
@@ -0,0 +1,11 @@
+rtc0 root:root 660 @ln -sf /dev/rtc0 /dev/rtc
+tun 0:0 660 >net/tun
+device-mapper 0:0 660 @mkdir /dev/mapper
+null 0:0 777
+zero 0:0 666
+u?random 0:0 644
+console 0:0 0600
+ptmx 0:0 666
+tty 0:0 666
+ttyS* 0:0 640
+.* 0:0 644 @/lib/mdev/init
diff --git a/target/qemu-mips64/kernel.config b/target/qemu-mips64/kernel.config
new file mode 100644
index 000000000..b92d60f06
--- /dev/null
+++ b/target/qemu-mips64/kernel.config
@@ -0,0 +1,930 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc7
+# Sat May 30 17:42:51 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+CONFIG_MIPS_MALTA=y
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
+CONFIG_MIPS_BONITO64=y
+CONFIG_MIPS_MSC=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_GIC=y
+CONFIG_MIPS_BOARDS_GEN=y
+CONFIG_PCI_GT64XXX_PCI0=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPS64_R1=y
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS64=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_CPU_SCACHE=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_SMARTMIPS is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_SMARTMIPS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_MMU=y
+CONFIG_I8253=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MIPS32_COMPAT is not set
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_PROC_FS is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+#