diff options
author | Waldemar Brodkorb <wbx@openadk.org> | 2014-06-30 07:09:50 +0200 |
---|---|---|
committer | Waldemar Brodkorb <wbx@openadk.org> | 2014-06-30 07:10:11 +0200 |
commit | aa6259aed442339ba288d5a0e704eb22465c426e (patch) | |
tree | 2dab6fe5d3edfa8f1abaf59119c7d849aaab0593 /target/mips/mikrotik-rb4xx/patches/3.14.9/0001-mtd-add-rb4xx-nand-driver.patch | |
parent | 155e38be229580dfad4792b3a8e702c31ca193b0 (diff) |
bump kernels
Diffstat (limited to 'target/mips/mikrotik-rb4xx/patches/3.14.9/0001-mtd-add-rb4xx-nand-driver.patch')
-rw-r--r-- | target/mips/mikrotik-rb4xx/patches/3.14.9/0001-mtd-add-rb4xx-nand-driver.patch | 351 |
1 files changed, 351 insertions, 0 deletions
diff --git a/target/mips/mikrotik-rb4xx/patches/3.14.9/0001-mtd-add-rb4xx-nand-driver.patch b/target/mips/mikrotik-rb4xx/patches/3.14.9/0001-mtd-add-rb4xx-nand-driver.patch new file mode 100644 index 000000000..8199de991 --- /dev/null +++ b/target/mips/mikrotik-rb4xx/patches/3.14.9/0001-mtd-add-rb4xx-nand-driver.patch @@ -0,0 +1,351 @@ +From 1e692cc0c53202b932eedabd0315107910c5b093 Mon Sep 17 00:00:00 2001 +From: Phil Sutter <phil@nwl.cc> +Date: Tue, 13 May 2014 00:08:54 +0200 +Subject: [PATCH] mtd: add rb4xx nand driver + +--- + drivers/mtd/nand/Kconfig | 4 + + drivers/mtd/nand/Makefile | 1 + + drivers/mtd/nand/rb4xx_nand.c | 305 ++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 310 insertions(+) + create mode 100644 drivers/mtd/nand/rb4xx_nand.c + +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 90ff447..bb01309 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -510,4 +510,8 @@ config MTD_NAND_XWAY + Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + to the External Bus Unit (EBU). + ++config MTD_NAND_RB4XX ++ tristate "NAND flash driver for RouterBoard 4xx series" ++ depends on MTD_NAND && ATH79_MACH_RB4XX ++ + endif # MTD_NAND +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index 542b568..e2b5e1c 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o + obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o + obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o +diff --git a/drivers/mtd/nand/rb4xx_nand.c b/drivers/mtd/nand/rb4xx_nand.c +new file mode 100644 +index 0000000..5b9841b +--- /dev/null ++++ b/drivers/mtd/nand/rb4xx_nand.c +@@ -0,0 +1,305 @@ ++/* ++ * NAND flash driver for the MikroTik RouterBoard 4xx series ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This file was based on the driver for Linux 2.6.22 published by ++ * MikroTik for their RouterBoard 4xx series devices. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/mtd/nand.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/io.h> ++#include <linux/gpio.h> ++#include <linux/slab.h> ++ ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/rb4xx_cpld.h> ++ ++#define DRV_NAME "rb4xx-nand" ++#define DRV_VERSION "0.2.0" ++#define DRV_DESC "NAND flash driver for RouterBoard 4xx series" ++ ++#define RB4XX_NAND_GPIO_READY 5 ++#define RB4XX_NAND_GPIO_ALE 37 ++#define RB4XX_NAND_GPIO_CLE 38 ++#define RB4XX_NAND_GPIO_NCE 39 ++ ++struct rb4xx_nand_info { ++ struct nand_chip chip; ++ struct mtd_info mtd; ++}; ++ ++/* ++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader ++ * will not be able to find the kernel that we load. ++ */ ++static struct nand_ecclayout rb4xx_nand_ecclayout = { ++ .eccbytes = 6, ++ .eccpos = { 8, 9, 10, 13, 14, 15 }, ++ .oobavail = 9, ++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } ++}; ++ ++static struct mtd_partition rb4xx_nand_partitions[] = { ++ { ++ .name = "booter", ++ .offset = 0, ++ .size = (256 * 1024), ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "kernel", ++ .offset = (256 * 1024), ++ .size = (4 * 1024 * 1024) - (256 * 1024), ++ }, ++ { ++ .name = "rootfs", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static int rb4xx_nand_dev_ready(struct mtd_info *mtd) ++{ ++ return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY); ++} ++ ++static void rb4xx_nand_write_cmd(unsigned char cmd) ++{ ++ unsigned char data = cmd; ++ int err; ++ ++ err = rb4xx_cpld_write(&data, 1); ++ if (err) ++ pr_err("rb4xx_nand: write cmd failed, err=%d\n", err); ++} ++ ++static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, ++ unsigned int ctrl) ++{ ++ if (ctrl & NAND_CTRL_CHANGE) { ++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE, ++ (ctrl & NAND_CLE) ? 1 : 0); ++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE, ++ (ctrl & NAND_ALE) ? 1 : 0); ++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE, ++ (ctrl & NAND_NCE) ? 0 : 1); ++ } ++ ++ if (cmd != NAND_CMD_NONE) ++ rb4xx_nand_write_cmd(cmd); ++} ++ ++static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd) ++{ ++ unsigned char data = 0; ++ int err; ++ ++ err = rb4xx_cpld_read(&data, NULL, 1); ++ if (err) { ++ pr_err("rb4xx_nand: read data failed, err=%d\n", err); ++ data = 0xff; ++ } ++ ++ return data; ++} ++ ++static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf, ++ int len) ++{ ++ int err; ++ ++ err = rb4xx_cpld_write(buf, len); ++ if (err) ++ pr_err("rb4xx_nand: write buf failed, err=%d\n", err); ++} ++ ++static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf, ++ int len) ++{ ++ int err; ++ ++ err = rb4xx_cpld_read(buf, NULL, len); ++ if (err) ++ pr_err("rb4xx_nand: read buf failed, err=%d\n", err); ++} ++ ++static int rb4xx_nand_probe(struct platform_device *pdev) ++{ ++ struct rb4xx_nand_info *info; ++ int ret; ++ ++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); ++ ++ ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_READY); ++ goto err; ++ } ++ ++ ret = gpio_direction_input(RB4XX_NAND_GPIO_READY); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set input mode on gpio %d\n", ++ RB4XX_NAND_GPIO_READY); ++ goto err_free_gpio_ready; ++ } ++ ++ ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_ALE); ++ goto err_free_gpio_ready; ++ } ++ ++ ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", ++ RB4XX_NAND_GPIO_ALE); ++ goto err_free_gpio_ale; ++ } ++ ++ ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_CLE); ++ goto err_free_gpio_ale; ++ } ++ ++ ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", ++ RB4XX_NAND_GPIO_CLE); ++ goto err_free_gpio_cle; ++ } ++ ++ ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_NCE); ++ goto err_free_gpio_cle; ++ } ++ ++ ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", ++ RB4XX_NAND_GPIO_ALE); ++ goto err_free_gpio_nce; ++ } ++ ++ info = kzalloc(sizeof(*info), GFP_KERNEL); ++ if (!info) { ++ dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n"); ++ ret = -ENOMEM; ++ goto err_free_gpio_nce; ++ } ++ ++ info->chip.priv = &info; ++ info->mtd.priv = &info->chip; ++ info->mtd.owner = THIS_MODULE; ++ ++ info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl; ++ info->chip.dev_ready = rb4xx_nand_dev_ready; ++ info->chip.read_byte = rb4xx_nand_read_byte; ++ info->chip.write_buf = rb4xx_nand_write_buf; ++ info->chip.read_buf = rb4xx_nand_read_buf; ++ ++ info->chip.chip_delay = 25; ++ info->chip.ecc.mode = NAND_ECC_SOFT; ++ ++ platform_set_drvdata(pdev, info); ++ ++ ret = nand_scan_ident(&info->mtd, 1, NULL); ++ if (ret) { ++ ret = -ENXIO; ++ goto err_free_info; ++ } ++ ++ if (info->mtd.writesize == 512) ++ info->chip.ecc.layout = &rb4xx_nand_ecclayout; ++ ++ ret = nand_scan_tail(&info->mtd); ++ if (ret) { ++ return -ENXIO; ++ goto err_set_drvdata; ++ } ++ ++ mtd_device_register(&info->mtd, rb4xx_nand_partitions, ++ ARRAY_SIZE(rb4xx_nand_partitions)); ++ if (ret) ++ goto err_release_nand; ++ ++ return 0; ++ ++err_release_nand: ++ nand_release(&info->mtd); ++err_set_drvdata: ++ platform_set_drvdata(pdev, NULL); ++err_free_info: ++ kfree(info); ++err_free_gpio_nce: ++ gpio_free(RB4XX_NAND_GPIO_NCE); ++err_free_gpio_cle: ++ gpio_free(RB4XX_NAND_GPIO_CLE); ++err_free_gpio_ale: ++ gpio_free(RB4XX_NAND_GPIO_ALE); ++err_free_gpio_ready: ++ gpio_free(RB4XX_NAND_GPIO_READY); ++err: ++ return ret; ++} ++ ++static int rb4xx_nand_remove(struct platform_device *pdev) ++{ ++ struct rb4xx_nand_info *info = platform_get_drvdata(pdev); ++ ++ nand_release(&info->mtd); ++ platform_set_drvdata(pdev, NULL); ++ kfree(info); ++ gpio_free(RB4XX_NAND_GPIO_NCE); ++ gpio_free(RB4XX_NAND_GPIO_CLE); ++ gpio_free(RB4XX_NAND_GPIO_ALE); ++ gpio_free(RB4XX_NAND_GPIO_READY); ++ ++ return 0; ++} ++ ++static struct platform_driver rb4xx_nand_driver = { ++ .probe = rb4xx_nand_probe, ++ .remove = rb4xx_nand_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init rb4xx_nand_init(void) ++{ ++ return platform_driver_register(&rb4xx_nand_driver); ++} ++ ++static void __exit rb4xx_nand_exit(void) ++{ ++ platform_driver_unregister(&rb4xx_nand_driver); ++} ++ ++module_init(rb4xx_nand_init); ++module_exit(rb4xx_nand_exit); ++ ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); ++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>"); ++MODULE_LICENSE("GPL v2"); +-- +1.8.5.3 + |