split IPv4 symbols from Config.in.netfilter, add IPv6 ones

Luckily, the vast majority of iptables modules now reside in netfilter
core (i.e. they're layer3-independent), so there is not so much to keep
in sync in between iptables and ip6tables.

3 files changed, 380 insertions, 244 deletions

diff --git a/target/linux/config/Config.in.netfilter b/target/linux/config/Config.in.netfilter
index 3cf61ed58..e831fd594 100644
--- a/target/linux/config/Config.in.netfilter
+++ b/target/linux/config/Config.in.netfilter
@@ -197,251 +197,12 @@ config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_TCPMSS
 endmenu
 
 menu "IP: Netfilter Configuration"
+source target/linux/config/Config.in.netfilter.ip4
+endmenu
 
-config ADK_KPACKAGE_KMOD_NF_CONNTRACK_IPV4
-	bool 'IPv4 connection tracking support (required for NAT)'
-	select ADK_KPACKAGE_KMOD_NF_CONNTRACK
-	help
-	  Connection tracking keeps a record of what packets have passed
-	  through your machine, in order to figure out how they are related
-	  into connections.
-
-config ADK_KPACKAGE_KMOD_IP_NF_CT_ACCT
-	bool 'Connection tracking flow accounting'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  If this option is enabled, the connection tracking code will
-	  keep per-flow packet and byte counters.
-
-	  Those counters can be used for flow-based accounting or the
-	  `connbytes' match.
-
-config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_MARK
-	bool 'Connection mark tracking support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	select ADK_KERNEL_IP_NF_MATCH_CONNMARK
-	help
-	  This option enables support for connection marks, used by the
-	  `CONNMARK' target and `connmark' match. Similar to the mark value
-	  of packets, but this mark value is kept in the conntrack session
-	  instead of the individual packets.
-
-config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_SECMARK
-	bool 'Connection tracking security mark support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	#FIXME select NETWORK_SECMARK
-	help
-	  This option enables security markings to be applied to
-	  connections.  Typically they are copied to connections from
-	  packets using the CONNSECMARK target and copied back from
-	  connections to packets with the same target, with the packets
-	  being originally labeled via SECMARK.
-
-config ADK_KPACKAGE_KMOD_IP_NF_FTP
-	tristate 'FTP protocol support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  Tracking FTP connections is problematic: special helpers are
-	  required for tracking them, and doing masquerading and other forms
-	  of Network Address Translation on them.
-
-config ADK_KPACKAGE_KMOD_IP_NF_IRC
-	tristate 'IRC protocol support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  There is a commonly-used extension to IRC called
-	  Direct Client-to-Client Protocol (DCC).  This enables users to send
-	  files to each other, and also chat to each other without the need
-	  of a server.  DCC Sending is used anywhere you send files over IRC,
-	  and DCC Chat is most commonly used by Eggdrop bots.  If you are
-	  using NAT, this extension will enable you to send files and initiate
-	  chats.  Note that you do NOT need this extension to get files or
-	  have others initiate chats, or everything else in IRC.
-
-config ADK_KPACKAGE_KMOD_IP_NF_NETBIOS_NS
-	tristate 'NetBIOS name service protocol support (EXPERIMENTAL)'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  NetBIOS name service requests are sent as broadcast messages from an
-	  unprivileged port and responded to with unicast messages to the
-	  same port. This make them hard to firewall properly because connection
-	  tracking doesn't deal with broadcasts. This helper tracks locally
-	  originating NetBIOS name service requests and the corresponding
-	  responses. It relies on correct IP address configuration, specifically
-	  netmask and broadcast address. When properly configured, the output
-	  of "ip address show" should look similar to this:
-
-	  $ ip -4 address show eth0
-	  4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
-	      inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0
-
-config ADK_KPACKAGE_KMOD_IP_NF_TFTP
-	tristate 'TFTP protocol support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  TFTP connection tracking helper, this is required depending
-	  on how restrictive your ruleset is.
-	  If you are using a tftp client behind -j SNAT or -j MASQUERADING
-	  you will need this.
-
-config ADK_KPACKAGE_KMOD_IP_NF_AMANDA
-	tristate 'Amanda backup protocol support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	#FIXME TEXTSEARCH && TEXTSEARCH_KMP
-	help
-	  If you are running the Amanda backup package <http://www.amanda.org/>
-	  on this machine or machines that will be MASQUERADED through this
-	  machine, then you may want to enable this feature.  This allows the
-	  connection tracking and natting code to allow the sub-channels that
-	  Amanda requires for communication of the backup data, messages and
-	  index.
-
-config ADK_KPACKAGE_KMOD_IP_NF_PPTP
-	tristate 'PPTP protocol support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  This module adds support for PPTP (Point to Point Tunnelling
-	  Protocol, RFC2637) connection tracking and NAT. 
-	
-	  If you are running PPTP sessions over a stateful firewall or NAT
-	  box, you may want to enable this feature.  
-	
-	  Please note that not all PPTP modes of operation are supported yet.
-	  For more info, read top of the file
-	  net/ipv4/netfilter/ip_conntrack_pptp.c
-
-config ADK_KPACKAGE_KMOD_IP_NF_H323
-	tristate 'H.323 protocol support (EXPERIMENTAL)'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-	  important VoIP protocols, it is widely used by voice hardware and
-	  software including voice gateways, IP phones, Netmeeting, OpenPhone,
-	  Gnomemeeting, etc.
-
-	  With this module you can support H.323 on a connection tracking/NAT
-	  firewall.
-
-	  This module supports RAS, Fast Start, H.245 Tunnelling, Call
-	  Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat,
-	  whiteboard, file transfer, etc. For more information, please
-	  visit http://nath323.sourceforge.net/.
-
-config ADK_KPACKAGE_KMOD_IP_NF_SIP
-	tristate 'SIP protocol support (EXPERIMENTAL)'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
-	help
-	  SIP is an application-layer control protocol that can establish,
-	  modify, and terminate multimedia sessions (conferences) such as
-	  Internet telephony calls. With the ip_conntrack_sip and
-	  the ip_nat_sip modules you can support the protocol on a connection
-	  tracking/NATing firewall.
-
-
-config ADK_KPACKAGE_KMOD_IP_NF_IPTABLES
-	tristate 'IP tables support (required for filtering/masq/NAT)'
-	select ADK_KERNEL_NETFILTER_XTABLES
-	help
-	  iptables is a general, extensible packet identification framework.
-	  The packet filtering and full NAT (masquerading, port forwarding,
-	  etc) subsystems now use this: say `Y' or `M' here if you want to use
-	  either of those.
-
-config ADK_KPACKAGE_KMOD_IP_NF_FILTER
-	tristate 'Packet Filtering'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_IPTABLES
-	help
-	  Packet filtering defines a table `filter', which has a series of
-	  rules for simple packet filtering at local input, forwarding and
-	  local output.  See the man page for iptables(8).
-
-config ADK_KPACKAGE_KMOD_NF_NAT
-	tristate 'Full NAT'
-	depends on ADK_KPACKAGE_KMOD_NF_IP_IPTABLES
-	help
-	  The Full NAT option allows masquerading, port forwarding and other
-	  forms of full Network Address Port Translation.  It is controlled by
-	  the `nat' table in iptables: see the man page for iptables(8).
-
-config ADK_KPACKAGE_KMOD_IP_NF_TARGET_MASQUERADE
-	tristate 'MASQUERADE target support'
-	depends on ADK_KPACKAGE_KMOD_NF_NAT
-	help
-	  Masquerading is a special case of NAT: all outgoing connections are
-	  changed to seem to come from a particular interface's address, and
-	  if the interface goes down, those connections are lost.  This is
-	  only useful for dialup accounts with dynamic IP address (ie. your IP
-	  address will be different on next dialup).
-
-config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REJECT
-	tristate 'REJECT target support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER
-	help
-	  The REJECT target allows a filtering rule to specify that an ICMP
-	  error should be issued in response to an incoming packet, rather
-	  than silently being dropped.
-
-config ADK_KPACKAGE_KMOD_IP_NF_TARGET_LOG
-	tristate 'LOG target support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER
-	help
-	  This option adds a `LOG' target, which allows you to create rules in
-	  any iptables table which records the packet header to the syslog.
-
-config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ULOG
-	tristate 'ULOG target support (ipv4 only)'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER
-	help
-	  This option enables the old IPv4-only "ipt_ULOG" implementation
-	  which has been obsoleted by the new "nfnetlink_log" code (see
-	  CONFIG_NETFILTER_NETLINK_LOG).
-
-	  This option adds a `ULOG' target, which allows you to create rules in
-	  any iptables table. The packet is passed to a userspace logging
-	  daemon using netlink multicast sockets; unlike the LOG target
-	  which can only be viewed through syslog.
-
-	  The appropriate userspace logging daemon (ulogd) may be obtained from
-	  <http://www.gnumonks.org/projects/ulogd/>
-
-config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REDIRECT
-	tristate 'REDIRECT target support'
-	depends on ADK_KPACKAGE_KMOD_NF_NAT
-	help
-	  REDIRECT is a special case of NAT: all incoming connections are
-	  mapped onto the incoming interface's address, causing the packets to
-	  come to the local machine instead of passing through.  This is
-	  useful for transparent proxies.
-
-config ADK_KPACKAGE_KMOD_IP_NF_TARGET_NETMAP
-	tristate 'NETMAP target support'
-	depends on ADK_KPACKAGE_KMOD_NF_NAT
-	help
-	  NETMAP is an implementation of static 1:1 NAT mapping of network
-	  addresses. It maps the network address part, while keeping the host
-	  address part intact. It is similar to Fast NAT, except that
-	  Netfilter's connection tracking doesn't work well with Fast NAT.
-
-config ADK_KPACKAGE_KMOD_IP_NF_MANGLE
-	tristate 'Packet mangling'
-	depends on ADK_KPACKAGE_KMOD_NF_NAT
-	help
-	  This option adds a `mangle' table to iptables: see the man page for
-	  iptables(8).  This table is used for various packet alterations
-	  which can effect how the packet is routed.
-
-config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ECN
-	tristate 'ECN target support'
-	depends on ADK_KPACKAGE_KMOD_IP_NF_MANGLE
-	help
-	  This option adds a `ECN' target, which can be used in the iptables mangle
-	  table.  
-
-	  You can use this target to remove the ECN bits from the IPv4 header of
-	  an IP packet.  This is particularly useful, if you need to work around
-	  existing ECN blackholes on the internet, but don't want to disable
-	  ECN support in general.
-
+menu "IPv6: Netfilter Configuration"
+	depends on ADK_ENABLE_IPV6
+source target/linux/config/Config.in.netfilter.ip6
 endmenu
 
 menu "Ethernet bridge firewalling"
diff --git a/target/linux/config/Config.in.netfilter.ip4 b/target/linux/config/Config.in.netfilter.ip4
new file mode 100644
index 000000000..34eb14449
--- /dev/null
+++ b/target/linux/config/Config.in.netfilter.ip4
@@ -0,0 +1,244 @@
+config ADK_KPACKAGE_KMOD_NF_CONNTRACK_IPV4
+	bool 'IPv4 connection tracking support (required for NAT)'
+	select ADK_KPACKAGE_KMOD_NF_CONNTRACK
+	help
+	  Connection tracking keeps a record of what packets have passed
+	  through your machine, in order to figure out how they are related
+	  into connections.
+
+config ADK_KPACKAGE_KMOD_IP_NF_CT_ACCT
+	bool 'Connection tracking flow accounting'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  If this option is enabled, the connection tracking code will
+	  keep per-flow packet and byte counters.
+
+	  Those counters can be used for flow-based accounting or the
+	  `connbytes' match.
+
+config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_MARK
+	bool 'Connection mark tracking support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	select ADK_KERNEL_IP_NF_MATCH_CONNMARK
+	help
+	  This option enables support for connection marks, used by the
+	  `CONNMARK' target and `connmark' match. Similar to the mark value
+	  of packets, but this mark value is kept in the conntrack session
+	  instead of the individual packets.
+
+config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_SECMARK
+	bool 'Connection tracking security mark support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	#FIXME select NETWORK_SECMARK
+	help
+	  This option enables security markings to be applied to
+	  connections.  Typically they are copied to connections from
+	  packets using the CONNSECMARK target and copied back from
+	  connections to packets with the same target, with the packets
+	  being originally labeled via SECMARK.
+
+config ADK_KPACKAGE_KMOD_IP_NF_FTP
+	tristate 'FTP protocol support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  Tracking FTP connections is problematic: special helpers are
+	  required for tracking them, and doing masquerading and other forms
+	  of Network Address Translation on them.
+
+config ADK_KPACKAGE_KMOD_IP_NF_IRC
+	tristate 'IRC protocol support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  There is a commonly-used extension to IRC called
+	  Direct Client-to-Client Protocol (DCC).  This enables users to send
+	  files to each other, and also chat to each other without the need
+	  of a server.  DCC Sending is used anywhere you send files over IRC,
+	  and DCC Chat is most commonly used by Eggdrop bots.  If you are
+	  using NAT, this extension will enable you to send files and initiate
+	  chats.  Note that you do NOT need this extension to get files or
+	  have others initiate chats, or everything else in IRC.
+
+config ADK_KPACKAGE_KMOD_IP_NF_NETBIOS_NS
+	tristate 'NetBIOS name service protocol support (EXPERIMENTAL)'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  NetBIOS name service requests are sent as broadcast messages from an
+	  unprivileged port and responded to with unicast messages to the
+	  same port. This make them hard to firewall properly because connection
+	  tracking doesn't deal with broadcasts. This helper tracks locally
+	  originating NetBIOS name service requests and the corresponding
+	  responses. It relies on correct IP address configuration, specifically
+	  netmask and broadcast address. When properly configured, the output
+	  of "ip address show" should look similar to this:
+
+	  $ ip -4 address show eth0
+	  4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
+	      inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0
+
+config ADK_KPACKAGE_KMOD_IP_NF_TFTP
+	tristate 'TFTP protocol support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  TFTP connection tracking helper, this is required depending
+	  on how restrictive your ruleset is.
+	  If you are using a tftp client behind -j SNAT or -j MASQUERADING
+	  you will need this.
+
+config ADK_KPACKAGE_KMOD_IP_NF_AMANDA
+	tristate 'Amanda backup protocol support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	#FIXME TEXTSEARCH && TEXTSEARCH_KMP
+	help
+	  If you are running the Amanda backup package <http://www.amanda.org/>
+	  on this machine or machines that will be MASQUERADED through this
+	  machine, then you may want to enable this feature.  This allows the
+	  connection tracking and natting code to allow the sub-channels that
+	  Amanda requires for communication of the backup data, messages and
+	  index.
+
+config ADK_KPACKAGE_KMOD_IP_NF_PPTP
+	tristate 'PPTP protocol support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  This module adds support for PPTP (Point to Point Tunnelling
+	  Protocol, RFC2637) connection tracking and NAT. 
+	
+	  If you are running PPTP sessions over a stateful firewall or NAT
+	  box, you may want to enable this feature.  
+	
+	  Please note that not all PPTP modes of operation are supported yet.
+	  For more info, read top of the file
+	  net/ipv4/netfilter/ip_conntrack_pptp.c
+
+config ADK_KPACKAGE_KMOD_IP_NF_H323
+	tristate 'H.323 protocol support (EXPERIMENTAL)'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+	  important VoIP protocols, it is widely used by voice hardware and
+	  software including voice gateways, IP phones, Netmeeting, OpenPhone,
+	  Gnomemeeting, etc.
+
+	  With this module you can support H.323 on a connection tracking/NAT
+	  firewall.
+
+	  This module supports RAS, Fast Start, H.245 Tunnelling, Call
+	  Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat,
+	  whiteboard, file transfer, etc. For more information, please
+	  visit http://nath323.sourceforge.net/.
+
+config ADK_KPACKAGE_KMOD_IP_NF_SIP
+	tristate 'SIP protocol support (EXPERIMENTAL)'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK
+	help
+	  SIP is an application-layer control protocol that can establish,
+	  modify, and terminate multimedia sessions (conferences) such as
+	  Internet telephony calls. With the ip_conntrack_sip and
+	  the ip_nat_sip modules you can support the protocol on a connection
+	  tracking/NATing firewall.
+
+
+config ADK_KPACKAGE_KMOD_IP_NF_IPTABLES
+	tristate 'IP tables support (required for filtering/masq/NAT)'
+	select ADK_KERNEL_NETFILTER_XTABLES
+	help
+	  iptables is a general, extensible packet identification framework.
+	  The packet filtering and full NAT (masquerading, port forwarding,
+	  etc) subsystems now use this: say `Y' or `M' here if you want to use
+	  either of those.
+
+config ADK_KPACKAGE_KMOD_IP_NF_FILTER
+	tristate 'Packet Filtering'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_IPTABLES
+	help
+	  Packet filtering defines a table `filter', which has a series of
+	  rules for simple packet filtering at local input, forwarding and
+	  local output.  See the man page for iptables(8).
+
+config ADK_KPACKAGE_KMOD_NF_NAT
+	tristate 'Full NAT'
+	depends on ADK_KPACKAGE_KMOD_NF_IP_IPTABLES
+	help
+	  The Full NAT option allows masquerading, port forwarding and other
+	  forms of full Network Address Port Translation.  It is controlled by
+	  the `nat' table in iptables: see the man page for iptables(8).
+
+config ADK_KPACKAGE_KMOD_IP_NF_TARGET_MASQUERADE
+	tristate 'MASQUERADE target support'
+	depends on ADK_KPACKAGE_KMOD_NF_NAT
+	help
+	  Masquerading is a special case of NAT: all outgoing connections are
+	  changed to seem to come from a particular interface's address, and
+	  if the interface goes down, those connections are lost.  This is
+	  only useful for dialup accounts with dynamic IP address (ie. your IP
+	  address will be different on next dialup).
+
+config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REJECT
+	tristate 'REJECT target support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER
+	help
+	  The REJECT target allows a filtering rule to specify that an ICMP
+	  error should be issued in response to an incoming packet, rather
+	  than silently being dropped.
+
+config ADK_KPACKAGE_KMOD_IP_NF_TARGET_LOG
+	tristate 'LOG target support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER
+	help
+	  This option adds a `LOG' target, which allows you to create rules in
+	  any iptables table which records the packet header to the syslog.
+
+config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ULOG
+	tristate 'ULOG target support (ipv4 only)'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER
+	help
+	  This option enables the old IPv4-only "ipt_ULOG" implementation
+	  which has been obsoleted by the new "nfnetlink_log" code (see
+	  CONFIG_NETFILTER_NETLINK_LOG).
+
+	  This option adds a `ULOG' target, which allows you to create rules in
+	  any iptables table. The packet is passed to a userspace logging
+	  daemon using netlink multicast sockets; unlike the LOG target
+	  which can only be viewed through syslog.
+
+	  The appropriate userspace logging daemon (ulogd) may be obtained from
+	  <http://www.gnumonks.org/projects/ulogd/>
+
+config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REDIRECT
+	tristate 'REDIRECT target support'
+	depends on ADK_KPACKAGE_KMOD_NF_NAT
+	help
+	  REDIRECT is a special case of NAT: all incoming connections are
+	  mapped onto the incoming interface's address, causing the packets to
+	  come to the local machine instead of passing through.  This is
+	  useful for transparent proxies.
+
+config ADK_KPACKAGE_KMOD_IP_NF_TARGET_NETMAP
+	tristate 'NETMAP target support'
+	depends on ADK_KPACKAGE_KMOD_NF_NAT
+	help
+	  NETMAP is an implementation of static 1:1 NAT mapping of network
+	  addresses. It maps the network address part, while keeping the host
+	  address part intact. It is similar to Fast NAT, except that
+	  Netfilter's connection tracking doesn't work well with Fast NAT.
+
+config ADK_KPACKAGE_KMOD_IP_NF_MANGLE
+	tristate 'Packet mangling'
+	depends on ADK_KPACKAGE_KMOD_NF_NAT
+	help
+	  This option adds a `mangle' table to iptables: see the man page for
+	  iptables(8).  This table is used for various packet alterations
+	  which can effect how the packet is routed.
+
+config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ECN
+	tristate 'ECN target support'
+	depends on ADK_KPACKAGE_KMOD_IP_NF_MANGLE
+	help
+	  This option adds a `ECN' target, which can be used in the iptables mangle
+	  table.  
+
+	  You can use this target to remove the ECN bits from the IPv4 header of
+	  an IP packet.  This is particularly useful, if you need to work around
+	  existing ECN blackholes on the internet, but don't want to disable
+	  ECN support in general.
+
diff --git a/target/linux/config/Config.in.netfilter.ip6 b/target/linux/config/Config.in.netfilter.ip6
new file mode 100644
index 000000000..a0bb7beba
--- /dev/null
+++ b/target/linux/config/Config.in.netfilter.ip6
@@ -0,0 +1,131 @@
+config ADK_KPACKAGE_KMOD_NF_CONNTRACK_IPV6
+	tristate "IPv6 connection tracking support"
+	select ADK_KPACKAGE_KMOD_NF_CONNTRACK
+	---help---
+	  Connection tracking keeps a record of what packets have passed
+	  through your machine, in order to figure out how they are related
+	  into connections.
+
+	  This is IPv6 support on Layer 3 independent connection tracking.
+	  Layer 3 independent connection tracking is experimental scheme
+	  which generalize ip_conntrack to support other layer 3 protocols.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_IPTABLES
+	tristate "IP6 tables support (required for filtering)"
+	select ADK_KERNEL_NETFILTER_XTABLES
+	help
+	  ip6tables is a general, extensible packet identification framework.
+	  Currently only the packet filtering and packet mangling subsystem
+	  for IPv6 use this, but connection tracking is going to follow.
+	  Say 'Y' or 'M' here if you want to use either of those.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+if ADK_KPACKAGE_KMOD_IP6_NF_IPTABLES
+
+# The simple matches.
+config ADK_KPACKAGE_KMOD_IP6_NF_MATCH_AH
+	tristate '"ah" match support'
+	help
+	  This module allows one to match AH packets.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_MATCH_EUI64
+	tristate '"eui64" address check'
+	help
+	  This module performs checking on the IPv6 source address
+	  Compares the last 64 bits with the EUI64 (delivered
+	  from the MAC address) address
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_MATCH_FRAG
+	tristate '"frag" Fragmentation header match support'
+	help
+	  frag matching allows you to match packets based on the fragmentation
+	  header of the packet.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_MATCH_OPTS
+	tristate '"hbh" hop-by-hop and "dst" opts header match support'
+	help
+	  This allows one to match packets based on the hop-by-hop
+	  and destination options headers of a packet.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_MATCH_IPV6HEADER
+	tristate '"ipv6header" IPv6 Extension Headers Match'
+	help
+	  This module allows one to match packets based upon
+	  the ipv6 extension headers.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_MATCH_MH
+	tristate '"mh" match support'
+	help
+	  This module allows one to match MH packets.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_MATCH_RT
+	tristate '"rt" Routing header match support'
+	help
+	  rt matching allows you to match packets based on the routing
+	  header of the packet.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+# The targets
+config ADK_KPACKAGE_KMOD_IP6_NF_TARGET_LOG
+	tristate "LOG target support"
+	help
+	  This option adds a `LOG' target, which allows you to create rules in
+	  any iptables table which records the packet header to the syslog.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_FILTER
+	tristate "Packet filtering"
+	help
+	  Packet filtering defines a table `filter', which has a series of
+	  rules for simple packet filtering at local input, forwarding and
+	  local output.  See the man page for iptables(8).
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_TARGET_REJECT
+	tristate "REJECT target support"
+	depends on ADK_KPACKAGE_KMOD_IP6_NF_FILTER
+	help
+	  The REJECT target allows a filtering rule to specify that an ICMPv6
+	  error should be issued in response to an incoming packet, rather
+	  than silently being dropped.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_MANGLE
+	tristate "Packet mangling"
+	help
+	  This option adds a `mangle' table to iptables: see the man page for
+	  iptables(8).  This table is used for various packet alterations
+	  which can effect how the packet is routed.
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config ADK_KPACKAGE_KMOD_IP6_NF_RAW
+	tristate  'raw table support (required for TRACE)'
+	help
+	  This option adds a `raw' table to ip6tables. This table is the very
+	  first in the netfilter framework and hooks in at the PREROUTING
+	  and OUTPUT chains.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
+
+endif # ADK_KPACKAGE_KMOD_IP6_NF_IPTABLES