upgrade all targets to Linux 2.6.34

1 files changed, 64 insertions, 6473 deletions

diff --git a/target/foxboard/patches/cris.patch b/target/foxboard/patches/cris.patch
index 3c6bca534..1a4e109e5 100644
--- a/target/foxboard/patches/cris.patch
+++ b/target/foxboard/patches/cris.patch
@@ -1,6 +1,6 @@
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.32/arch/cris/arch-v10/drivers/axisflashmap.c
---- linux-2.6.32.orig/arch/cris/arch-v10/drivers/axisflashmap.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/drivers/axisflashmap.c	2010-01-10 14:34:37.376309632 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.34/arch/cris/arch-v10/drivers/axisflashmap.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/drivers/axisflashmap.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/drivers/axisflashmap.c	2010-05-25 19:41:49.324723145 +0200
 @@ -113,7 +113,7 @@
  
  /* If no partition-table was found, we use this default-set. */
@@ -146,9 +146,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.
  	return err;
  }
  
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.32/arch/cris/arch-v10/drivers/ds1302.c
---- linux-2.6.32.orig/arch/cris/arch-v10/drivers/ds1302.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/drivers/ds1302.c	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.34/arch/cris/arch-v10/drivers/ds1302.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/drivers/ds1302.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/drivers/ds1302.c	2010-05-25 19:41:49.361720375 +0200
 @@ -21,6 +21,7 @@
  #include <linux/delay.h>
  #include <linux/bcd.h>
@@ -181,9 +181,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.32/arc
          return 0;
  
  }
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.32/arch/cris/arch-v10/drivers/gpio.c
---- linux-2.6.32.orig/arch/cris/arch-v10/drivers/gpio.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/drivers/gpio.c	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.34/arch/cris/arch-v10/drivers/gpio.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/drivers/gpio.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/drivers/gpio.c	2010-05-25 19:41:49.427216846 +0200
 @@ -21,6 +21,7 @@
  #include <linux/poll.h>
  #include <linux/init.h>
@@ -217,18 +217,18 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.32/arch/
  	/* Clear all leds */
  #if defined (CONFIG_ETRAX_CSP0_LEDS) ||  defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
  	CRIS_LED_NETWORK_SET(0);
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/lib/hw_settings.S linux-2.6.32/arch/cris/arch-v10/lib/hw_settings.S
---- linux-2.6.32.orig/arch/cris/arch-v10/lib/hw_settings.S	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/lib/hw_settings.S	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/lib/hw_settings.S linux-2.6.34/arch/cris/arch-v10/lib/hw_settings.S
+--- linux-2.6.34.orig/arch/cris/arch-v10/lib/hw_settings.S	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/lib/hw_settings.S	2010-05-25 19:41:49.485343082 +0200
 @@ -60,3 +60,5 @@
  	.dword R_PORT_PB_SET
  	.dword PB_SET_VALUE
  	.dword 0 ; No more register values
 +	.ascii "ACME_PART_MAGIC" 
 +	.dword 0xdeadc0de
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/mm/init.c linux-2.6.32/arch/cris/arch-v10/mm/init.c
---- linux-2.6.32.orig/arch/cris/arch-v10/mm/init.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/mm/init.c	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/mm/init.c linux-2.6.34/arch/cris/arch-v10/mm/init.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/mm/init.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/mm/init.c	2010-05-25 19:41:49.522223225 +0200
 @@ -184,6 +184,9 @@
  
  	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
@@ -239,9 +239,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/mm/init.c linux-2.6.32/arch/cris/
  
  /* Initialize remaps of some I/O-ports. It is important that this
   * is called before any driver is initialized.
-diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/Makefile linux-2.6.32/arch/cris/boot/compressed/Makefile
---- linux-2.6.32.orig/arch/cris/boot/compressed/Makefile	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/boot/compressed/Makefile	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/boot/compressed/Makefile linux-2.6.34/arch/cris/boot/compressed/Makefile
+--- linux-2.6.34.orig/arch/cris/boot/compressed/Makefile	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/boot/compressed/Makefile	2010-05-25 19:41:49.562223178 +0200
 @@ -18,7 +18,7 @@
  OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
  OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
@@ -251,9 +251,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/Makefile linux-2.6.32/arch
  
  quiet_cmd_image = BUILD   $@
  cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/misc.c linux-2.6.32/arch/cris/boot/compressed/misc.c
---- linux-2.6.32.orig/arch/cris/boot/compressed/misc.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/boot/compressed/misc.c	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/boot/compressed/misc.c linux-2.6.34/arch/cris/boot/compressed/misc.c
+--- linux-2.6.34.orig/arch/cris/boot/compressed/misc.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/boot/compressed/misc.c	2010-05-25 19:41:49.602223136 +0200
 @@ -106,7 +106,7 @@
  
  static void flush_window(void);
@@ -304,9 +304,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/misc.c linux-2.6.32/arch/c
 -	puts("Done. Now booting the kernel\n");
 +	putstr("Done. Now booting the kernel\n");
  }
-diff -Nur linux-2.6.32.orig/arch/cris/boot/Makefile linux-2.6.32/arch/cris/boot/Makefile
---- linux-2.6.32.orig/arch/cris/boot/Makefile	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/boot/Makefile	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/boot/Makefile linux-2.6.34/arch/cris/boot/Makefile
+--- linux-2.6.34.orig/arch/cris/boot/Makefile	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/boot/Makefile	2010-05-25 19:41:49.642223132 +0200
 @@ -5,7 +5,7 @@
  objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
  objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
@@ -324,10 +324,10 @@ diff -Nur linux-2.6.32.orig/arch/cris/boot/Makefile linux-2.6.32/arch/cris/boot/
  
  $(obj)/zImage:  $(obj)/compressed/vmlinux
  	@cp $< $@
-diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
---- linux-2.6.32.orig/arch/cris/Kconfig	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/Kconfig	2010-01-10 13:41:59.256309588 +0100
-@@ -168,6 +168,12 @@
+diff -Nur linux-2.6.34.orig/arch/cris/Kconfig linux-2.6.34/arch/cris/Kconfig
+--- linux-2.6.34.orig/arch/cris/Kconfig	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/Kconfig	2010-05-25 19:41:49.692223112 +0200
+@@ -174,6 +174,12 @@
  	help
  	  Size of DRAM (decimal in MB) typically 2, 8 or 16.
  
@@ -340,7 +340,7 @@ diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
  config ETRAX_VMEM_SIZE
         int "Video memory size (dec, in MB)"
         depends on ETRAX_ARCH_V32 && !ETRAXFS
-@@ -273,7 +279,7 @@
+@@ -279,7 +285,7 @@
  	select MTD_CFI_AMDSTD
  	select MTD_JEDECPROBE if ETRAX_ARCH_V32
  	select MTD_CHAR
@@ -349,7 +349,7 @@ diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
  	select MTD_PARTITIONS
  	select MTD_CONCAT
  	select MTD_COMPLEX_MAPPINGS
-@@ -662,6 +668,11 @@
+@@ -668,6 +674,11 @@
  
  source "drivers/ide/Kconfig"
  
@@ -361,9 +361,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
  source "drivers/net/Kconfig"
  
  source "drivers/i2c/Kconfig"
-diff -Nur linux-2.6.32.orig/arch/cris/Makefile linux-2.6.32/arch/cris/Makefile
---- linux-2.6.32.orig/arch/cris/Makefile	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/Makefile	2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/Makefile linux-2.6.34/arch/cris/Makefile
+--- linux-2.6.34.orig/arch/cris/Makefile	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/Makefile	2010-05-25 19:41:49.751101855 +0200
 @@ -40,10 +40,10 @@
  
  LD = $(CROSS_COMPILE)ld -mcrislinux
@@ -377,10 +377,10 @@ diff -Nur linux-2.6.32.orig/arch/cris/Makefile linux-2.6.32/arch/cris/Makefile
  KBUILD_CPPFLAGS += $(inc)
  
  ifdef CONFIG_FRAME_POINTER
-diff -Nur linux-2.6.32.orig/drivers/net/cris/eth_v10.c linux-2.6.32/drivers/net/cris/eth_v10.c
---- linux-2.6.32.orig/drivers/net/cris/eth_v10.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/net/cris/eth_v10.c	2010-01-10 13:41:59.256309588 +0100
-@@ -1725,7 +1725,7 @@
+diff -Nur linux-2.6.34.orig/drivers/net/cris/eth_v10.c linux-2.6.34/drivers/net/cris/eth_v10.c
+--- linux-2.6.34.orig/drivers/net/cris/eth_v10.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/net/cris/eth_v10.c	2010-05-25 19:41:49.809234068 +0200
+@@ -1722,7 +1722,7 @@
  static void
  e100_netpoll(struct net_device* netdev)
  {
@@ -389,1773 +389,9 @@ diff -Nur linux-2.6.32.orig/drivers/net/cris/eth_v10.c linux-2.6.32/drivers/net/
  }
  #endif
  
-diff -Nur linux-2.6.32.orig/drivers/net/cris/eth_v10.c.orig linux-2.6.32/drivers/net/cris/eth_v10.c.orig
---- linux-2.6.32.orig/drivers/net/cris/eth_v10.c.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/net/cris/eth_v10.c.orig	2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,1760 @@
-+/*
-+ * e100net.c: A network driver for the ETRAX 100LX network controller.
-+ *
-+ * Copyright (c) 1998-2002 Axis Communications AB.
-+ *
-+ * The outline of this driver comes from skeleton.c.
-+ *
-+ */
-+
-+
-+#include <linux/module.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/in.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/spinlock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/bitops.h>
-+
-+#include <linux/if.h>
-+#include <linux/mii.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/ethtool.h>
-+
-+#include <arch/svinto.h>/* DMA and register descriptions */
-+#include <asm/io.h>         /* CRIS_LED_* I/O functions */
-+#include <asm/irq.h>
-+#include <asm/dma.h>
-+#include <asm/system.h>
-+#include <asm/ethernet.h>
-+#include <asm/cache.h>
-+#include <arch/io_interface_mux.h>
-+
-+//#define ETHDEBUG
-+#define D(x)
-+
-+/*
-+ * The name of the card. Is used for messages and in the requests for
-+ * io regions, irqs and dma channels
-+ */
-+
-+static const char* cardname = "ETRAX 100LX built-in ethernet controller";
-+
-+/* A default ethernet address. Highlevel SW will set the real one later */
-+
-+static struct sockaddr default_mac = {
-+	0,
-+	{ 0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00 }
-+};
-+
-+/* Information that need to be kept for each board. */
-+struct net_local {
-+	struct net_device_stats stats;
-+	struct mii_if_info mii_if;
-+
-+	/* Tx control lock.  This protects the transmit buffer ring
-+	 * state along with the "tx full" state of the driver.  This
-+	 * means all netif_queue flow control actions are protected
-+	 * by this lock as well.
-+	 */
-+	spinlock_t lock;
-+
-+	spinlock_t led_lock; /* Protect LED state */
-+	spinlock_t transceiver_lock; /* Protect transceiver state. */
-+};
-+
-+typedef struct etrax_eth_descr
-+{
-+	etrax_dma_descr descr;
-+	struct sk_buff* skb;
-+} etrax_eth_descr;
-+
-+/* Some transceivers requires special handling */
-+struct transceiver_ops
-+{
-+	unsigned int oui;
-+	void (*check_speed)(struct net_device* dev);
-+	void (*check_duplex)(struct net_device* dev);
-+};
-+
-+/* Duplex settings */
-+enum duplex
-+{
-+	half,
-+	full,
-+	autoneg
-+};
-+
-+/* Dma descriptors etc. */
-+
-+#define MAX_MEDIA_DATA_SIZE 1522
-+
-+#define MIN_PACKET_LEN      46
-+#define ETHER_HEAD_LEN      14
-+
-+/*
-+** MDIO constants.
-+*/
-+#define MDIO_START                          0x1
-+#define MDIO_READ                           0x2
-+#define MDIO_WRITE                          0x1
-+#define MDIO_PREAMBLE              0xfffffffful
-+
-+/* Broadcom specific */
-+#define MDIO_AUX_CTRL_STATUS_REG           0x18
-+#define MDIO_BC_FULL_DUPLEX_IND             0x1
-+#define MDIO_BC_SPEED                       0x2
-+
-+/* TDK specific */
-+#define MDIO_TDK_DIAGNOSTIC_REG              18
-+#define MDIO_TDK_DIAGNOSTIC_RATE          0x400
-+#define MDIO_TDK_DIAGNOSTIC_DPLX          0x800
-+
-+/*Intel LXT972A specific*/
-+#define MDIO_INT_STATUS_REG_2			0x0011
-+#define MDIO_INT_FULL_DUPLEX_IND       (1 << 9)
-+#define MDIO_INT_SPEED                (1 << 14)
-+
-+/* Network flash constants */
-+#define NET_FLASH_TIME                  (HZ/50) /* 20 ms */
-+#define NET_FLASH_PAUSE                (HZ/100) /* 10 ms */
-+#define NET_LINK_UP_CHECK_INTERVAL       (2*HZ) /* 2 s   */
-+#define NET_DUPLEX_CHECK_INTERVAL        (2*HZ) /* 2 s   */
-+
-+#define NO_NETWORK_ACTIVITY 0
-+#define NETWORK_ACTIVITY    1
-+
-+#define NBR_OF_RX_DESC     32
-+#define NBR_OF_TX_DESC     16
-+
-+/* Large packets are sent directly to upper layers while small packets are */
-+/* copied (to reduce memory waste). The following constant decides the breakpoint */
-+#define RX_COPYBREAK 256
-+
-+/* Due to a chip bug we need to flush the cache when descriptors are returned */
-+/* to the DMA. To decrease performance impact we return descriptors in chunks. */
-+/* The following constant determines the number of descriptors to return. */
-+#define RX_QUEUE_THRESHOLD  NBR_OF_RX_DESC/2
-+
-+#define GET_BIT(bit,val)   (((val) >> (bit)) & 0x01)
-+
-+/* Define some macros to access ETRAX 100 registers */
-+#define SETF(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
-+					  IO_FIELD_(reg##_, field##_, val)
-+#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
-+					  IO_STATE_(reg##_, field##_, _##val)
-+
-+static etrax_eth_descr *myNextRxDesc;  /* Points to the next descriptor to
-+                                          to be processed */
-+static etrax_eth_descr *myLastRxDesc;  /* The last processed descriptor */
-+
-+static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32)));
-+
-+static etrax_eth_descr* myFirstTxDesc; /* First packet not yet sent */
-+static etrax_eth_descr* myLastTxDesc;  /* End of send queue */
-+static etrax_eth_descr* myNextTxDesc;  /* Next descriptor to use */
-+static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32)));
-+
-+static unsigned int network_rec_config_shadow = 0;
-+
-+static unsigned int network_tr_ctrl_shadow = 0;
-+
-+/* Network speed indication. */
-+static DEFINE_TIMER(speed_timer, NULL, 0, 0);
-+static DEFINE_TIMER(clear_led_timer, NULL, 0, 0);
-+static int current_speed; /* Speed read from transceiver */
-+static int current_speed_selection; /* Speed selected by user */
-+static unsigned long led_next_time;
-+static int led_active;
-+static int rx_queue_len;
-+
-+/* Duplex */
-+static DEFINE_TIMER(duplex_timer, NULL, 0, 0);
-+static int full_duplex;
-+static enum duplex current_duplex;
-+
-+/* Index to functions, as function prototypes. */
-+
-+static int etrax_ethernet_init(void);
-+
-+static int e100_open(struct net_device *dev);
-+static int e100_set_mac_address(struct net_device *dev, void *addr);
-+static int e100_send_packet(struct sk_buff *skb, struct net_device *dev);
-+static irqreturn_t e100rxtx_interrupt(int irq, void *dev_id);
-+static irqreturn_t e100nw_interrupt(int irq, void *dev_id);
-+static void e100_rx(struct net_device *dev);
-+static int e100_close(struct net_device *dev);
-+static int e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-+static int e100_set_config(struct net_device* dev, struct ifmap* map);
-+static void e100_tx_timeout(struct net_device *dev);
-+static struct net_device_stats *e100_get_stats(struct net_device *dev);
-+static void set_multicast_list(struct net_device *dev);
-+static void e100_hardware_send_packet(struct net_local* np, char *buf, int length);
-+static void update_rx_stats(struct net_device_stats *);
-+static void update_tx_stats(struct net_device_stats *);
-+static int e100_probe_transceiver(struct net_device* dev);
-+
-+static void e100_check_speed(unsigned long priv);
-+static void e100_set_speed(struct net_device* dev, unsigned long speed);
-+static void e100_check_duplex(unsigned long priv);
-+static void e100_set_duplex(struct net_device* dev, enum duplex);
-+static void e100_negotiate(struct net_device* dev);
-+
-+static int e100_get_mdio_reg(struct net_device *dev, int phy_id, int location);
-+static void e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value);
-+
-+static void e100_send_mdio_cmd(unsigned short cmd, int write_cmd);
-+static void e100_send_mdio_bit(unsigned char bit);
-+static unsigned char e100_receive_mdio_bit(void);
-+static void e100_reset_transceiver(struct net_device* net);
-+
-+static void e100_clear_network_leds(unsigned long dummy);
-+static void e100_set_network_leds(int active);
-+
-+static const struct ethtool_ops e100_ethtool_ops;
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void dummy_check_speed(struct net_device* dev);
-+static void dummy_check_duplex(struct net_device* dev);
-+#else
-+static void broadcom_check_speed(struct net_device* dev);
-+static void broadcom_check_duplex(struct net_device* dev);
-+static void tdk_check_speed(struct net_device* dev);
-+static void tdk_check_duplex(struct net_device* dev);
-+static void intel_check_speed(struct net_device* dev);
-+static void intel_check_duplex(struct net_device* dev);
-+static void generic_check_speed(struct net_device* dev);
-+static void generic_check_duplex(struct net_device* dev);
-+#endif
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void e100_netpoll(struct net_device* dev);
-+#endif
-+
-+static int autoneg_normal = 1;
-+
-+struct transceiver_ops transceivers[] =
-+{
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+	{0x0000, dummy_check_speed, dummy_check_duplex}        /* Dummy */
-+#else
-+	{0x1018, broadcom_check_speed, broadcom_check_duplex},  /* Broadcom */
-+	{0xC039, tdk_check_speed, tdk_check_duplex},            /* TDK 2120 */
-+	{0x039C, tdk_check_speed, tdk_check_duplex},            /* TDK 2120C */
-+        {0x04de, intel_check_speed, intel_check_duplex},     	/* Intel LXT972A*/
-+	{0x0000, generic_check_speed, generic_check_duplex}     /* Generic, must be last */
-+#endif
-+};
-+
-+struct transceiver_ops* transceiver = &transceivers[0];
-+
-+static const struct net_device_ops e100_netdev_ops = {
-+	.ndo_open		= e100_open,
-+	.ndo_stop		= e100_close,
-+	.ndo_start_xmit		= e100_send_packet,
-+	.ndo_tx_timeout		= e100_tx_timeout,
-+	.ndo_get_stats		= e100_get_stats,
-+	.ndo_set_multicast_list	= set_multicast_list,
-+	.ndo_do_ioctl		= e100_ioctl,
-+	.ndo_set_mac_address	= e100_set_mac_address,
-+	.ndo_validate_addr	= eth_validate_addr,
-+	.ndo_change_mtu		= eth_change_mtu,
-+	.ndo_set_config		= e100_set_config,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	.ndo_poll_controller	= e100_netpoll,
-+#endif
-+};
-+
-+#define tx_done(dev) (*R_DMA_CH0_CMD == 0)
-+
-+/*
-+ * Check for a network adaptor of this type, and return '0' if one exists.
-+ * If dev->base_addr == 0, probe all likely locations.
-+ * If dev->base_addr == 1, always return failure.
-+ * If dev->base_addr == 2, allocate space for the device and return success
-+ * (detachable devices only).
-+ */
-+
-+static int __init
-+etrax_ethernet_init(void)
-+{
-+	struct net_device *dev;
-+        struct net_local* np;
-+	int i, err;
-+
-+	printk(KERN_INFO
-+	       "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2007 Axis Communications AB\n");
-+
-+	if (cris_request_io_interface(if_eth, cardname)) {
-+		printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n");
-+		return -EBUSY;
-+	}
-+
-+	dev = alloc_etherdev(sizeof(struct net_local));
-+	if (!dev)
-+		return -ENOMEM;
-+
-+	np = netdev_priv(dev);
-+
-+	/* we do our own locking */
-+	dev->features |= NETIF_F_LLTX;
-+
-+	dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */
-+
-+	/* now setup our etrax specific stuff */
-+
-+	dev->irq = NETWORK_DMA_RX_IRQ_NBR; /* we really use DMATX as well... */
-+	dev->dma = NETWORK_RX_DMA_NBR;
-+
-+	/* fill in our handlers so the network layer can talk to us in the future */
-+
-+	dev->ethtool_ops	= &e100_ethtool_ops;
-+	dev->netdev_ops		= &e100_netdev_ops;
-+
-+	spin_lock_init(&np->lock);
-+	spin_lock_init(&np->led_lock);
-+	spin_lock_init(&np->transceiver_lock);
-+
-+	/* Initialise the list of Etrax DMA-descriptors */
-+
-+	/* Initialise receive descriptors */
-+
-+	for (i = 0; i < NBR_OF_RX_DESC; i++) {
-+		/* Allocate two extra cachelines to make sure that buffer used
-+		 * by DMA does not share cacheline with any other data (to
-+		 * avoid cache bug)
-+		 */
-+		RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
-+		if (!RxDescList[i].skb)
-+			return -ENOMEM;
-+		RxDescList[i].descr.ctrl   = 0;
-+		RxDescList[i].descr.sw_len = MAX_MEDIA_DATA_SIZE;
-+		RxDescList[i].descr.next   = virt_to_phys(&RxDescList[i + 1]);
-+		RxDescList[i].descr.buf    = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data));
-+		RxDescList[i].descr.status = 0;
-+		RxDescList[i].descr.hw_len = 0;
-+		prepare_rx_descriptor(&RxDescList[i].descr);
-+	}
-+
-+	RxDescList[NBR_OF_RX_DESC - 1].descr.ctrl   = d_eol;
-+	RxDescList[NBR_OF_RX_DESC - 1].descr.next   = virt_to_phys(&RxDescList[0]);
-+	rx_queue_len = 0;
-+
-+	/* Initialize transmit descriptors */
-+	for (i = 0; i < NBR_OF_TX_DESC; i++) {
-+		TxDescList[i].descr.ctrl   = 0;
-+		TxDescList[i].descr.sw_len = 0;
-+		TxDescList[i].descr.next   = virt_to_phys(&TxDescList[i + 1].descr);
-+		TxDescList[i].descr.buf    = 0;
-+		TxDescList[i].descr.status = 0;
-+		TxDescList[i].descr.hw_len = 0;
-+		TxDescList[i].skb = 0;
-+	}
-+
-+	TxDescList[NBR_OF_TX_DESC - 1].descr.ctrl   = d_eol;
-+	TxDescList[NBR_OF_TX_DESC - 1].descr.next   = virt_to_phys(&TxDescList[0].descr);
-+
-+	/* Initialise initial pointers */
-+
-+	myNextRxDesc  = &RxDescList[0];
-+	myLastRxDesc  = &RxDescList[NBR_OF_RX_DESC - 1];
-+	myFirstTxDesc = &TxDescList[0];
-+	myNextTxDesc  = &TxDescList[0];
-+	myLastTxDesc  = &TxDescList[NBR_OF_TX_DESC - 1];
-+
-+	/* Register device */
-+	err = register_netdev(dev);
-+	if (err) {
-+		free_netdev(dev);
-+		return err;
-+	}
-+
-+	/* set the default MAC address */
-+
-+	e100_set_mac_address(dev, &default_mac);
-+
-+	/* Initialize speed indicator stuff. */
-+
-+	current_speed = 10;
-+	current_speed_selection = 0; /* Auto */
-+	speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+	speed_timer.data = (unsigned long)dev;
-+	speed_timer.function = e100_check_speed;
-+
-+	clear_led_timer.function = e100_clear_network_leds;
-+	clear_led_timer.data = (unsigned long)dev;
-+
-+	full_duplex = 0;
-+	current_duplex = autoneg;
-+	duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+        duplex_timer.data = (unsigned long)dev;
-+	duplex_timer.function = e100_check_duplex;
-+
-+        /* Initialize mii interface */
-+	np->mii_if.phy_id_mask = 0x1f;
-+	np->mii_if.reg_num_mask = 0x1f;
-+	np->mii_if.dev = dev;
-+	np->mii_if.mdio_read = e100_get_mdio_reg;
-+	np->mii_if.mdio_write = e100_set_mdio_reg;
-+
-+	/* Initialize group address registers to make sure that no */
-+	/* unwanted addresses are matched */
-+	*R_NETWORK_GA_0 = 0x00000000;
-+	*R_NETWORK_GA_1 = 0x00000000;
-+
-+	/* Initialize next time the led can flash */
-+	led_next_time = jiffies;
-+	return 0;
-+}
-+
-+/* set MAC address of the interface. called from the core after a
-+ * SIOCSIFADDR ioctl, and from the bootup above.
-+ */
-+
-+static int
-+e100_set_mac_address(struct net_device *dev, void *p)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+	struct sockaddr *addr = p;
-+
-+	spin_lock(&np->lock); /* preemption protection */
-+
-+	/* remember it */
-+
-+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+	/* Write it to the hardware.
-+	 * Note the way the address is wrapped:
-+	 * *R_NETWORK_SA_0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
-+	 * *R_NETWORK_SA_1 = a0_4 | (a0_5 << 8);
-+	 */
-+
-+	*R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
-+		(dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
-+	*R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
-+	*R_NETWORK_SA_2 = 0;
-+
-+	/* show it in the log as well */
-+
-+	printk(KERN_INFO "%s: changed MAC to %pM\n", dev->name, dev->dev_addr);
-+
-+	spin_unlock(&np->lock);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Open/initialize the board. This is called (in the current kernel)
-+ * sometime after booting when the 'ifconfig' program is run.
-+ *
-+ * This routine should set everything up anew at each open, even
-+ * registers that "should" only need to be set once at boot, so that
-+ * there is non-reboot way to recover if something goes wrong.
-+ */
-+
-+static int
-+e100_open(struct net_device *dev)
-+{
-+	unsigned long flags;
-+
-+	/* enable the MDIO output pin */
-+
-+	*R_NETWORK_MGM_CTRL = IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable);
-+
-+	*R_IRQ_MASK0_CLR =
-+		IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
-+		IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
-+		IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
-+
-+	/* clear dma0 and 1 eop and descr irq masks */
-+	*R_IRQ_MASK2_CLR =
-+		IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
-+		IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
-+		IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
-+		IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
-+
-+	/* Reset and wait for the DMA channels */
-+
-+	RESET_DMA(NETWORK_TX_DMA_NBR);
-+	RESET_DMA(NETWORK_RX_DMA_NBR);
-+	WAIT_DMA(NETWORK_TX_DMA_NBR);
-+	WAIT_DMA(NETWORK_RX_DMA_NBR);
-+
-+	/* Initialise the etrax network controller */
-+
-+	/* allocate the irq corresponding to the receiving DMA */
-+
-+	if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt,
-+			IRQF_SAMPLE_RANDOM, cardname, (void *)dev)) {
-+		goto grace_exit0;
-+	}
-+
-+	/* allocate the irq corresponding to the transmitting DMA */
-+
-+	if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0,
-+			cardname, (void *)dev)) {
-+		goto grace_exit1;
-+	}
-+
-+	/* allocate the irq corresponding to the network errors etc */
-+
-+	if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0,
-+			cardname, (void *)dev)) {
-+		goto grace_exit2;
-+	}
-+
-+	/*
-+	 * Always allocate the DMA channels after the IRQ,
-+	 * and clean up on failure.
-+	 */
-+
-+	if (cris_request_dma(NETWORK_TX_DMA_NBR,
-+	                     cardname,
-+	                     DMA_VERBOSE_ON_ERROR,
-+	                     dma_eth)) {
-+		goto grace_exit3;
-+        }
-+
-+	if (cris_request_dma(NETWORK_RX_DMA_NBR,
-+	                     cardname,
-+	                     DMA_VERBOSE_ON_ERROR,
-+	                     dma_eth)) {
-+		goto grace_exit4;
-+        }
-+
-+	/* give the HW an idea of what MAC address we want */
-+
-+	*R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
-+		(dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
-+	*R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
-+	*R_NETWORK_SA_2 = 0;
-+
-+#if 0
-+	/* use promiscuous mode for testing */
-+	*R_NETWORK_GA_0 = 0xffffffff;
-+	*R_NETWORK_GA_1 = 0xffffffff;
-+
-+	*R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */
-+#else
-+	SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522);
-+	SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive);
-+	SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable);
-+	SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
-+	*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+#endif
-+
-+	*R_NETWORK_GEN_CONFIG =
-+		IO_STATE(R_NETWORK_GEN_CONFIG, phy,    mii_clk) |
-+		IO_STATE(R_NETWORK_GEN_CONFIG, enable, on);
-+
-+	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
-+	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, delay, none);
-+	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cancel, dont);
-+	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cd, enable);
-+	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, retry, enable);
-+	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, pad, enable);
-+	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable);
-+	*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
-+
-+	local_irq_save(flags);
-+
-+	/* enable the irq's for ethernet DMA */
-+
-+	*R_IRQ_MASK2_SET =
-+		IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
-+		IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
-+
-+	*R_IRQ_MASK0_SET =
-+		IO_STATE(R_IRQ_MASK0_SET, overrun,       set) |
-+		IO_STATE(R_IRQ_MASK0_SET, underrun,      set) |
-+		IO_STATE(R_IRQ_MASK0_SET, excessive_col, set);
-+
-+	/* make sure the irqs are cleared */
-+
-+	*R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
-+	*R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
-+
-+	/* make sure the rec and transmit error counters are cleared */
-+
-+	(void)*R_REC_COUNTERS;  /* dummy read */
-+	(void)*R_TR_COUNTERS;   /* dummy read */
-+
-+	/* start the receiving DMA channel so we can receive packets from now on */
-+
-+	*R_DMA_CH1_FIRST = virt_to_phys(myNextRxDesc);
-+	*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, start);
-+
-+	/* Set up transmit DMA channel so it can be restarted later */
-+
-+	*R_DMA_CH0_FIRST = 0;
-+	*R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
-+	netif_start_queue(dev);
-+
-+	local_irq_restore(flags);
-+
-+	/* Probe for transceiver */
-+	if (e100_probe_transceiver(dev))
-+		goto grace_exit5;
-+
-+	/* Start duplex/speed timers */
-+	add_timer(&speed_timer);
-+	add_timer(&duplex_timer);
-+
-+	/* We are now ready to accept transmit requeusts from
-+	 * the queueing layer of the networking.
-+	 */
-+	netif_carrier_on(dev);
-+
-+	return 0;
-+
-+grace_exit5:
-+	cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
-+grace_exit4:
-+	cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
-+grace_exit3:
-+	free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
-+grace_exit2:
-+	free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
-+grace_exit1:
-+	free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
-+grace_exit0:
-+	return -EAGAIN;
-+}
-+
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void
-+dummy_check_speed(struct net_device* dev)
-+{
-+	current_speed = 100;
-+}
-+#else
-+static void
-+generic_check_speed(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+	if ((data & ADVERTISE_100FULL) ||
-+	    (data & ADVERTISE_100HALF))
-+		current_speed = 100;
-+	else
-+		current_speed = 10;
-+}
-+
-+static void
-+tdk_check_speed(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+				 MDIO_TDK_DIAGNOSTIC_REG);
-+	current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
-+}
-+
-+static void
-+broadcom_check_speed(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+				 MDIO_AUX_CTRL_STATUS_REG);
-+	current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
-+}
-+
-+static void
-+intel_check_speed(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+				 MDIO_INT_STATUS_REG_2);
-+	current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
-+}
-+#endif
-+static void
-+e100_check_speed(unsigned long priv)
-+{
-+	struct net_device* dev = (struct net_device*)priv;
-+	struct net_local *np = netdev_priv(dev);
-+	static int led_initiated = 0;
-+	unsigned long data;
-+	int old_speed = current_speed;
-+
-+	spin_lock(&np->transceiver_lock);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
-+	if (!(data & BMSR_LSTATUS)) {
-+		current_speed = 0;
-+	} else {
-+		transceiver->check_speed(dev);
-+	}
-+
-+	spin_lock(&np->led_lock);
-+	if ((old_speed != current_speed) || !led_initiated) {
-+		led_initiated = 1;
-+		e100_set_network_leds(NO_NETWORK_ACTIVITY);
-+		if (current_speed)
-+			netif_carrier_on(dev);
-+		else
-+			netif_carrier_off(dev);
-+	}
-+	spin_unlock(&np->led_lock);
-+
-+	/* Reinitialize the timer. */
-+	speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+	add_timer(&speed_timer);
-+
-+	spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void
-+e100_negotiate(struct net_device* dev)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+	unsigned short data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+						MII_ADVERTISE);
-+
-+	/* Discard old speed and duplex settings */
-+	data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL |
-+	          ADVERTISE_10HALF | ADVERTISE_10FULL);
-+
-+	switch (current_speed_selection) {
-+		case 10:
-+			if (current_duplex == full)
-+				data |= ADVERTISE_10FULL;
-+			else if (current_duplex == half)
-+				data |= ADVERTISE_10HALF;
-+			else
-+				data |= ADVERTISE_10HALF | ADVERTISE_10FULL;
-+			break;
-+
-+		case 100:
-+			 if (current_duplex == full)
-+				data |= ADVERTISE_100FULL;
-+			else if (current_duplex == half)
-+				data |= ADVERTISE_100HALF;
-+			else
-+				data |= ADVERTISE_100HALF | ADVERTISE_100FULL;
-+			break;
-+
-+		case 0: /* Auto */
-+			 if (current_duplex == full)
-+				data |= ADVERTISE_100FULL | ADVERTISE_10FULL;
-+			else if (current_duplex == half)
-+				data |= ADVERTISE_100HALF | ADVERTISE_10HALF;
-+			else
-+				data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-+				  ADVERTISE_100HALF | ADVERTISE_100FULL;
-+			break;
-+
-+		default: /* assume autoneg speed and duplex */
-+			data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-+				  ADVERTISE_100HALF | ADVERTISE_100FULL;
-+			break;
-+	}
-+
-+	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+	if (autoneg_normal) {
-+		/* Renegotiate with link partner */
-+		data |= BMCR_ANENABLE | BMCR_ANRESTART;
-+	} else {
-+		/* Don't negotiate speed or duplex */
-+		data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
-+
-+		/* Set speed and duplex static */
-+		if (current_speed_selection == 10)
-+			data &= ~BMCR_SPEED100;
-+		else
-+			data |= BMCR_SPEED100;
-+
-+		if (current_duplex != full)
-+			data &= ~BMCR_FULLDPLX;
-+		else
-+			data |= BMCR_FULLDPLX;
-+	}
-+	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
-+}
-+
-+static void
-+e100_set_speed(struct net_device* dev, unsigned long speed)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->transceiver_lock);
-+	if (speed != current_speed_selection) {
-+		current_speed_selection = speed;
-+		e100_negotiate(dev);
-+	}
-+	spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void
-+e100_check_duplex(unsigned long priv)
-+{
-+	struct net_device *dev = (struct net_device *)priv;
-+	struct net_local *np = netdev_priv(dev);
-+	int old_duplex;
-+
-+	spin_lock(&np->transceiver_lock);
-+	old_duplex = full_duplex;
-+	transceiver->check_duplex(dev);
-+	if (old_duplex != full_duplex) {
-+		/* Duplex changed */
-+		SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
-+		*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+	}
-+
-+	/* Reinitialize the timer. */
-+	duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+	add_timer(&duplex_timer);
-+	np->mii_if.full_duplex = full_duplex;
-+	spin_unlock(&np->transceiver_lock);
-+}
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void
-+dummy_check_duplex(struct net_device* dev)
-+{
-+	full_duplex = 1;
-+}
-+#else
-+static void
-+generic_check_duplex(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+	if ((data & ADVERTISE_10FULL) ||
-+	    (data & ADVERTISE_100FULL))
-+		full_duplex = 1;
-+	else
-+		full_duplex = 0;
-+}
-+
-+static void
-+tdk_check_duplex(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+				 MDIO_TDK_DIAGNOSTIC_REG);
-+	full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
-+}
-+
-+static void
-+broadcom_check_duplex(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+				 MDIO_AUX_CTRL_STATUS_REG);
-+	full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void
-+intel_check_duplex(struct net_device* dev)
-+{
-+	unsigned long data;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+				 MDIO_INT_STATUS_REG_2);
-+	full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+#endif
-+static void
-+e100_set_duplex(struct net_device* dev, enum duplex new_duplex)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->transceiver_lock);
-+	if (new_duplex != current_duplex) {
-+		current_duplex = new_duplex;
-+		e100_negotiate(dev);
-+	}
-+	spin_unlock(&np->transceiver_lock);
-+}
-+
-+static int
-+e100_probe_transceiver(struct net_device* dev)
-+{
-+	int ret = 0;
-+
-+#if !defined(CONFIG_ETRAX_NO_PHY)
-+	unsigned int phyid_high;
-+	unsigned int phyid_low;
-+	unsigned int oui;
-+	struct transceiver_ops* ops = NULL;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->transceiver_lock);
-+
-+	/* Probe MDIO physical address */
-+	for (np->mii_if.phy_id = 0; np->mii_if.phy_id <= 31;
-+	     np->mii_if.phy_id++) {
-+		if (e100_get_mdio_reg(dev,
-+				      np->mii_if.phy_id, MII_BMSR) != 0xffff)
-+			break;
-+	}
-+	if (np->mii_if.phy_id == 32) {
-+		ret = -ENODEV;
-+		goto out;
-+	}
-+
-+	/* Get manufacturer */
-+	phyid_high = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID1);
-+	phyid_low = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID2);
-+	oui = (phyid_high << 6) | (phyid_low >> 10);
-+
-+	for (ops = &transceivers[0]; ops->oui; ops++) {
-+		if (ops->oui == oui)
-+			break;
-+	}
-+	transceiver = ops;
-+out:
-+	spin_unlock(&np->transceiver_lock);
-+#endif
-+	return ret;
-+}
-+
-+static int
-+e100_get_mdio_reg(struct net_device *dev, int phy_id, int location)
-+{
-+	unsigned short cmd;    /* Data to be sent on MDIO port */
-+	int data;   /* Data read from MDIO */
-+	int bitCounter;
-+
-+	/* Start of frame, OP Code, Physical Address, Register Address */
-+	cmd = (MDIO_START << 14) | (MDIO_READ << 12) | (phy_id << 7) |
-+		(location << 2);
-+
-+	e100_send_mdio_cmd(cmd, 0);
-+
-+	data = 0;
-+
-+	/* Data... */
-+	for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
-+		data |= (e100_receive_mdio_bit() << bitCounter);
-+	}
-+
-+	return data;
-+}
-+
-+static void
-+e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value)
-+{
-+	int bitCounter;
-+	unsigned short cmd;
-+
-+	cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (phy_id << 7) |
-+	      (location << 2);
-+
-+	e100_send_mdio_cmd(cmd, 1);
-+
-+	/* Data... */
-+	for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
-+		e100_send_mdio_bit(GET_BIT(bitCounter, value));
-+	}
-+
-+}
-+
-+static void
-+e100_send_mdio_cmd(unsigned short cmd, int write_cmd)
-+{
-+	int bitCounter;
-+	unsigned char data = 0x2;
-+
-+	/* Preamble */
-+	for (bitCounter = 31; bitCounter>= 0; bitCounter--)
-+		e100_send_mdio_bit(GET_BIT(bitCounter, MDIO_PREAMBLE));
-+
-+	for (bitCounter = 15; bitCounter >= 2; bitCounter--)
-+		e100_send_mdio_bit(GET_BIT(bitCounter, cmd));
-+
-+	/* Turnaround */
-+	for (bitCounter = 1; bitCounter >= 0 ; bitCounter--)
-+		if (write_cmd)
-+			e100_send_mdio_bit(GET_BIT(bitCounter, data));
-+		else
-+			e100_receive_mdio_bit();
-+}
-+
-+static void
-+e100_send_mdio_bit(unsigned char bit)
-+{
-+	*R_NETWORK_MGM_CTRL =
-+		IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
-+		IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
-+	udelay(1);
-+	*R_NETWORK_MGM_CTRL =
-+		IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
-+		IO_MASK(R_NETWORK_MGM_CTRL, mdck) |
-+		IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
-+	udelay(1);
-+}
-+
-+static unsigned char
-+e100_receive_mdio_bit()
-+{
-+	unsigned char bit;
-+	*R_NETWORK_MGM_CTRL = 0;
-+	bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT);
-+	udelay(1);
-+	*R_NETWORK_MGM_CTRL = IO_MASK(R_NETWORK_MGM_CTRL, mdck);
-+	udelay(1);
-+	return bit;
-+}
-+
-+static void
-+e100_reset_transceiver(struct net_device* dev)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+	unsigned short cmd;
-+	unsigned short data;
-+	int bitCounter;
-+
-+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+
-+	cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (np->mii_if.phy_id << 7) | (MII_BMCR << 2);
-+
-+	e100_send_mdio_cmd(cmd, 1);
-+
-+	data |= 0x8000;
-+
-+	for (bitCounter = 15; bitCounter >= 0 ; bitCounter--) {
-+		e100_send_mdio_bit(GET_BIT(bitCounter, data));
-+	}
-+}
-+
-+/* Called by upper layers if they decide it took too long to complete
-+ * sending a packet - we need to reset and stuff.
-+ */
-+
-+static void
-+e100_tx_timeout(struct net_device *dev)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&np->lock, flags);
-+
-+	printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
-+	       tx_done(dev) ? "IRQ problem" : "network cable problem");
-+
-+	/* remember we got an error */
-+
-+	np->stats.tx_errors++;
-+
-+	/* reset the TX DMA in case it has hung on something */
-+
-+	RESET_DMA(NETWORK_TX_DMA_NBR);
-+	WAIT_DMA(NETWORK_TX_DMA_NBR);
-+
-+	/* Reset the transceiver. */
-+
-+	e100_reset_transceiver(dev);
-+
-+	/* and get rid of the packets that never got an interrupt */
-+	while (myFirstTxDesc != myNextTxDesc) {
-+		dev_kfree_skb(myFirstTxDesc->skb);
-+		myFirstTxDesc->skb = 0;
-+		myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
-+	}
-+
-+	/* Set up transmit DMA channel so it can be restarted later */
-+	*R_DMA_CH0_FIRST = 0;
-+	*R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
-+
-+	/* tell the upper layers we're ok again */
-+
-+	netif_wake_queue(dev);
-+	spin_unlock_irqrestore(&np->lock, flags);
-+}
-+
-+
-+/* This will only be invoked if the driver is _not_ in XOFF state.
-+ * What this means is that we need not check it, and that this
-+ * invariant will hold if we make sure that the netif_*_queue()
-+ * calls are done at the proper times.
-+ */
-+
-+static int
-+e100_send_packet(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+	unsigned char *buf = skb->data;
-+	unsigned long flags;
-+
-+#ifdef ETHDEBUG
-+	printk("send packet len %d\n", length);
-+#endif
-+	spin_lock_irqsave(&np->lock, flags);  /* protect from tx_interrupt and ourself */
-+
-+	myNextTxDesc->skb = skb;
-+
-+	dev->trans_start = jiffies;
-+
-+	e100_hardware_send_packet(np, buf, skb->len);
-+
-+	myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next);
-+
-+	/* Stop queue if full */
-+	if (myNextTxDesc == myFirstTxDesc) {
-+		netif_stop_queue(dev);
-+	}
-+
-+	spin_unlock_irqrestore(&np->lock, flags);
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+/*
-+ * The typical workload of the driver:
-+ *   Handle the network interface interrupts.
-+ */
-+
-+static irqreturn_t
-+e100rxtx_interrupt(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct net_local *np = netdev_priv(dev);
-+	unsigned long irqbits;
-+
-+	/*
-+	 * Note that both rx and tx interrupts are blocked at this point,
-+	 * regardless of which got us here.
-+	 */
-+
-+	irqbits = *R_IRQ_MASK2_RD;
-+
-+	/* Handle received packets */
-+	if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) {
-+		/* acknowledge the eop interrupt */
-+
-+		*R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
-+
-+		/* check if one or more complete packets were indeed received */
-+
-+		while ((*R_DMA_CH1_FIRST != virt_to_phys(myNextRxDesc)) &&
-+		       (myNextRxDesc != myLastRxDesc)) {
-+			/* Take out the buffer and give it to the OS, then
-+			 * allocate a new buffer to put a packet in.
-+			 */
-+			e100_rx(dev);
-+			np->stats.rx_packets++;
-+			/* restart/continue on the channel, for safety */
-+			*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
-+			/* clear dma channel 1 eop/descr irq bits */
-+			*R_DMA_CH1_CLR_INTR =
-+				IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do) |
-+				IO_STATE(R_DMA_CH1_CLR_INTR, clr_descr, do);
-+
-+			/* now, we might have gotten another packet
-+			   so we have to loop back and check if so */
-+		}
-+	}
-+
-+	/* Report any packets that have been sent */
-+	while (virt_to_phys(myFirstTxDesc) != *R_DMA_CH0_FIRST &&
-+	       (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) {
-+		np->stats.tx_bytes += myFirstTxDesc->skb->len;
-+		np->stats.tx_packets++;
-+
-+		/* dma is ready with the transmission of the data in tx_skb, so now
-+		   we can release the skb memory */
-+		dev_kfree_skb_irq(myFirstTxDesc->skb);
-+		myFirstTxDesc->skb = 0;
-+		myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
-+                /* Wake up queue. */
-+		netif_wake_queue(dev);
-+	}
-+
-+	if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
-+		/* acknowledge the eop interrupt. */
-+		*R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t
-+e100nw_interrupt(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct net_local *np = netdev_priv(dev);
-+	unsigned long irqbits = *R_IRQ_MASK0_RD;
-+
-+	/* check for underrun irq */
-+	if (irqbits & IO_STATE(R_IRQ_MASK0_RD, underrun, active)) {
-+		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
-+		*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
-+		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-+		np->stats.tx_errors++;
-+		D(printk("ethernet receiver underrun!\n"));
-+	}
-+
-+	/* check for overrun irq */
-+	if (irqbits & IO_STATE(R_IRQ_MASK0_RD, overrun, active)) {
-+		update_rx_stats(&np->stats); /* this will ack the irq */
-+		D(printk("ethernet receiver overrun!\n"));
-+	}
-+	/* check for excessive collision irq */
-+	if (irqbits & IO_STATE(R_IRQ_MASK0_RD, excessive_col, active)) {
-+		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
-+		*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
-+		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-+		np->stats.tx_errors++;
-+		D(printk("ethernet excessive collisions!\n"));
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+/* We have a good packet(s), get it/them out of the buffers. */
-+static void
-+e100_rx(struct net_device *dev)
-+{
-+	struct sk_buff *skb;
-+	int length = 0;
-+	struct net_local *np = netdev_priv(dev);
-+	unsigned char *skb_data_ptr;
-+#ifdef ETHDEBUG
-+	int i;
-+#endif
-+	etrax_eth_descr *prevRxDesc;  /* The descriptor right before myNextRxDesc */
-+	spin_lock(&np->led_lock);
-+	if (!led_active && time_after(jiffies, led_next_time)) {
-+		/* light the network leds depending on the current speed. */
-+		e100_set_network_leds(NETWORK_ACTIVITY);
-+
-+		/* Set the earliest time we may clear the LED */
-+		led_next_time = jiffies + NET_FLASH_TIME;
-+		led_active = 1;
-+		mod_timer(&clear_led_timer, jiffies + HZ/10);
-+	}
-+	spin_unlock(&np->led_lock);
-+
-+	length = myNextRxDesc->descr.hw_len - 4;
-+	np->stats.rx_bytes += length;
-+
-+#ifdef ETHDEBUG
-+	printk("Got a packet of length %d:\n", length);
-+	/* dump the first bytes in the packet */
-+	skb_data_ptr = (unsigned char *)phys_to_virt(myNextRxDesc->descr.buf);
-+	for (i = 0; i < 8; i++) {
-+		printk("%d: %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x\n", i * 8,
-+		       skb_data_ptr[0],skb_data_ptr[1],skb_data_ptr[2],skb_data_ptr[3],
-+		       skb_data_ptr[4],skb_data_ptr[5],skb_data_ptr[6],skb_data_ptr[7]);
-+		skb_data_ptr += 8;
-+	}
-+#endif
-+
-+	if (length < RX_COPYBREAK) {
-+		/* Small packet, copy data */
-+		skb = dev_alloc_skb(length - ETHER_HEAD_LEN);
-+		if (!skb) {
-+			np->stats.rx_errors++;
-+			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-+			goto update_nextrxdesc;
-+		}
-+
-+		skb_put(skb, length - ETHER_HEAD_LEN);        /* allocate room for the packet body */
-+		skb_data_ptr = skb_push(skb, ETHER_HEAD_LEN); /* allocate room for the header */
-+
-+#ifdef ETHDEBUG
-+		printk("head = 0x%x, data = 0x%x, tail = 0x%x, end = 0x%x\n",
-+		       skb->head, skb->data, skb_tail_pointer(skb),
-+		       skb_end_pointer(skb));
-+		printk("copying packet to 0x%x.\n", skb_data_ptr);
-+#endif
-+
-+		memcpy(skb_data_ptr, phys_to_virt(myNextRxDesc->descr.buf), length);
-+	}
-+	else {
-+		/* Large packet, send directly to upper layers and allocate new
-+		 * memory (aligned to cache line boundary to avoid bug).
-+		 * Before sending the skb to upper layers we must make sure
-+		 * that skb->data points to the aligned start of the packet.
-+		 */
-+		int align;
-+		struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
-+		if (!new_skb) {
-+			np->stats.rx_errors++;
-+			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-+			goto update_nextrxdesc;
-+		}
-+		skb = myNextRxDesc->skb;
-+		align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data;
-+		skb_put(skb, length + align);
-+		skb_pull(skb, align); /* Remove alignment bytes */
-+		myNextRxDesc->skb = new_skb;
-+		myNextRxDesc->descr.buf = L1_CACHE_ALIGN(virt_to_phys(myNextRxDesc->skb->data));
-+	}
-+
-+	skb->protocol = eth_type_trans(skb, dev);
-+
-+	/* Send the packet to the upper layers */
-+	netif_rx(skb);
-+
-+  update_nextrxdesc:
-+	/* Prepare for next packet */
-+	myNextRxDesc->descr.status = 0;
-+	prevRxDesc = myNextRxDesc;
-+	myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next);
-+
-+	rx_queue_len++;
-+
-+	/* Check if descriptors should be returned */
-+	if (rx_queue_len == RX_QUEUE_THRESHOLD) {
-+		flush_etrax_cache();
-+		prevRxDesc->descr.ctrl |= d_eol;
-+		myLastRxDesc->descr.ctrl &= ~d_eol;
-+		myLastRxDesc = prevRxDesc;
-+		rx_queue_len = 0;
-+	}
-+}
-+
-+/* The inverse routine to net_open(). */
-+static int
-+e100_close(struct net_device *dev)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+
-+	printk(KERN_INFO "Closing %s.\n", dev->name);
-+
-+	netif_stop_queue(dev);
-+
-+	*R_IRQ_MASK0_CLR =
-+		IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
-+		IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
-+		IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
-+
-+	*R_IRQ_MASK2_CLR =
-+		IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
-+		IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
-+		IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
-+		IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
-+
-+	/* Stop the receiver and the transmitter */
-+
-+	RESET_DMA(NETWORK_TX_DMA_NBR);
-+	RESET_DMA(NETWORK_RX_DMA_NBR);
-+
-+	/* Flush the Tx and disable Rx here. */
-+
-+	free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
-+	free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
-+	free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
-+
-+	cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
-+	cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
-+
-+	/* Update the statistics here. */
-+
-+	update_rx_stats(&np->stats);
-+	update_tx_stats(&np->stats);
-+
-+	/* Stop speed/duplex timers */
-+	del_timer(&speed_timer);
-+	del_timer(&duplex_timer);
-+
-+	return 0;
-+}
-+
-+static int
-+e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+	struct mii_ioctl_data *data = if_mii(ifr);
-+	struct net_local *np = netdev_priv(dev);
-+	int rc = 0;
-+        int old_autoneg;
-+
-+	spin_lock(&np->lock); /* Preempt protection */
-+	switch (cmd) {
-+		/* The ioctls below should be considered obsolete but are */
-+		/* still present for compatability with old scripts/apps  */
-+		case SET_ETH_SPEED_10:                  /* 10 Mbps */
-+			e100_set_speed(dev, 10);
-+			break;
-+		case SET_ETH_SPEED_100:                /* 100 Mbps */
-+			e100_set_speed(dev, 100);
-+			break;
-+		case SET_ETH_SPEED_AUTO:        /* Auto-negotiate speed */
-+			e100_set_speed(dev, 0);
-+			break;
-+		case SET_ETH_DUPLEX_HALF:       /* Half duplex */
-+			e100_set_duplex(dev, half);
-+			break;
-+		case SET_ETH_DUPLEX_FULL:       /* Full duplex */
-+			e100_set_duplex(dev, full);
-+			break;
-+		case SET_ETH_DUPLEX_AUTO:       /* Auto-negotiate duplex */
-+			e100_set_duplex(dev, autoneg);
-+			break;
-+	        case SET_ETH_AUTONEG:
-+			old_autoneg = autoneg_normal;
-+		        autoneg_normal = *(int*)data;
-+			if (autoneg_normal != old_autoneg)
-+				e100_negotiate(dev);
-+			break;
-+		default:
-+			rc = generic_mii_ioctl(&np->mii_if, if_mii(ifr),
-+						cmd, NULL);
-+			break;
-+	}
-+	spin_unlock(&np->lock);
-+	return rc;
-+}
-+
-+static int e100_get_settings(struct net_device *dev,
-+			     struct ethtool_cmd *cmd)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+	int err;
-+
-+	spin_lock_irq(&np->lock);
-+	err = mii_ethtool_gset(&np->mii_if, cmd);
-+	spin_unlock_irq(&np->lock);
-+
-+	/* The PHY may support 1000baseT, but the Etrax100 does not.  */
-+	cmd->supported &= ~(SUPPORTED_1000baseT_Half
-+			    | SUPPORTED_1000baseT_Full);
-+	return err;
-+}
-+
-+static int e100_set_settings(struct net_device *dev,
-+			     struct ethtool_cmd *ecmd)
-+{
-+	if (ecmd->autoneg == AUTONEG_ENABLE) {
-+		e100_set_duplex(dev, autoneg);
-+		e100_set_speed(dev, 0);
-+	} else {
-+		e100_set_duplex(dev, ecmd->duplex == DUPLEX_HALF ? half : full);
-+		e100_set_speed(dev, ecmd->speed == SPEED_10 ? 10: 100);
-+	}
-+
-+	return 0;
-+}
-+
-+static void e100_get_drvinfo(struct net_device *dev,
-+			     struct ethtool_drvinfo *info)
-+{
-+	strncpy(info->driver, "ETRAX 100LX", sizeof(info->driver) - 1);
-+	strncpy(info->version, "$Revision: 1.31 $", sizeof(info->version) - 1);
-+	strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1);
-+	strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1);
-+}
-+
-+static int e100_nway_reset(struct net_device *dev)
-+{
-+	if (current_duplex == autoneg && current_speed_selection == 0)
-+		e100_negotiate(dev);
-+	return 0;
-+}
-+
-+static const struct ethtool_ops e100_ethtool_ops = {
-+	.get_settings	= e100_get_settings,
-+	.set_settings	= e100_set_settings,
-+	.get_drvinfo	= e100_get_drvinfo,
-+	.nway_reset	= e100_nway_reset,
-+	.get_link	= ethtool_op_get_link,
-+};
-+
-+static int
-+e100_set_config(struct net_device *dev, struct ifmap *map)
-+{
-+	struct net_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->lock); /* Preempt protection */
-+
-+	switch(map->port) {
-+		case IF_PORT_UNKNOWN:
-+			/* Use autoneg */
-+			e100_set_speed(dev, 0);
-+			e100_set_duplex(dev, autoneg);
-+			break;
-+		case IF_PORT_10BASET:
-+			e100_set_speed(dev, 10);
-+			e100_set_duplex(dev, autoneg);
-+			break;
-+		case IF_PORT_100BASET:
-+		case IF_PORT_100BASETX:
-+			e100_set_speed(dev, 100);
-+			e100_set_duplex(dev, autoneg);
-+			break;
-+		case IF_PORT_100BASEFX:
-+		case IF_PORT_10BASE2:
-+		case IF_PORT_AUI:
-+			spin_unlock(&np->lock);
-+			return -EOPNOTSUPP;
-+			break;
-+		default:
-+			printk(KERN_ERR "%s: Invalid media selected", dev->name);
-+			spin_unlock(&np->lock);
-+			return -EINVAL;
-+	}
-+	spin_unlock(&np->lock);
-+	return 0;
-+}
-+
-+static void
-+update_rx_stats(struct net_device_stats *es)
-+{
-+	unsigned long r = *R_REC_COUNTERS;
-+	/* update stats relevant to reception errors */
-+	es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r);
-+	es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r);
-+	es->rx_frame_errors += IO_EXTRACT(R_REC_COUNTERS, alignment_error, r);
-+	es->rx_length_errors += IO_EXTRACT(R_REC_COUNTERS, oversize, r);
-+}
-+
-+static void
-+update_tx_stats(struct net_device_stats *es)
-+{
-+	unsigned long r = *R_TR_COUNTERS;
-+	/* update stats relevant to transmission errors */
-+	es->collisions +=
-+		IO_EXTRACT(R_TR_COUNTERS, single_col, r) +
-+		IO_EXTRACT(R_TR_COUNTERS, multiple_col, r);
-+}
-+
-+/*
-+ * Get the current statistics.
-+ * This may be called with the card open or closed.
-+ */
-+static struct net_device_stats *
-+e100_get_stats(struct net_device *dev)
-+{
-+	struct net_local *lp = netdev_priv(dev);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&lp->lock, flags);
-+
-+	update_rx_stats(&lp->stats);
-+	update_tx_stats(&lp->stats);
-+
-+	spin_unlock_irqrestore(&lp->lock, flags);
-+	return &lp->stats;
-+}
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * num_addrs == -1	Promiscuous mode, receive all packets
-+ * num_addrs == 0	Normal mode, clear multicast list
-+ * num_addrs > 0	Multicast mode, receive normal and MC packets,
-+ *			and do best-effort filtering.
-+ */
-+static void
-+set_multicast_list(struct net_device *dev)
-+{
-+	struct net_local *lp = netdev_priv(dev);
-+	int num_addr = dev->mc_count;
-+	unsigned long int lo_bits;
-+	unsigned long int hi_bits;
-+
-+	spin_lock(&lp->lock);
-+	if (dev->flags & IFF_PROMISC) {
-+		/* promiscuous mode */
-+		lo_bits = 0xfffffffful;
-+		hi_bits = 0xfffffffful;
-+
-+		/* Enable individual receive */
-+		SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, receive);
-+		*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+	} else if (dev->flags & IFF_ALLMULTI) {
-+		/* enable all multicasts */
-+		lo_bits = 0xfffffffful;
-+		hi_bits = 0xfffffffful;
-+
-+		/* Disable individual receive */
-+		SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
-+		*R_NETWORK_REC_CONFIG =  network_rec_config_shadow;
-+	} else if (num_addr == 0) {
-+		/* Normal, clear the mc list */
-+		lo_bits = 0x00000000ul;
-+		hi_bits = 0x00000000ul;
-+
-+		/* Disable individual receive */
-+		SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
-+		*R_NETWORK_REC_CONFIG =  network_rec_config_shadow;
-+	} else {
-+		/* MC mode, receive normal and MC packets */
-+		char hash_ix;
-+		struct dev_mc_list *dmi = dev->mc_list;
-+		int i;
-+		char *baddr;
-+
-+		lo_bits = 0x00000000ul;
-+		hi_bits = 0x00000000ul;
-+		for (i = 0; i < num_addr; i++) {
-+			/* Calculate the hash index for the GA registers */
-+
-+			hash_ix = 0;
-+			baddr = dmi->dmi_addr;
-+			hash_ix ^= (*baddr) & 0x3f;
-+			hash_ix ^= ((*baddr) >> 6) & 0x03;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 2) & 0x03c;
-+			hash_ix ^= ((*baddr) >> 4) & 0xf;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 4) & 0x30;
-+			hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+			++baddr;
-+			hash_ix ^= (*baddr) & 0x3f;
-+			hash_ix ^= ((*baddr) >> 6) & 0x03;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 2) & 0x03c;
-+			hash_ix ^= ((*baddr) >> 4) & 0xf;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 4) & 0x30;
-+			hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+
-+			hash_ix &= 0x3f;
-+
-+			if (hash_ix >= 32) {
-+				hi_bits |= (1 << (hash_ix-32));
-+			} else {
-+				lo_bits |= (1 << hash_ix);
-+			}
-+			dmi = dmi->next;
-+		}
-+		/* Disable individual receive */
-+		SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
-+		*R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+	}
-+	*R_NETWORK_GA_0 = lo_bits;
-+	*R_NETWORK_GA_1 = hi_bits;
-+	spin_unlock(&lp->lock);
-+}
-+
-+void
-+e100_hardware_send_packet(struct net_local *np, char *buf, int length)
-+{
-+	D(printk("e100 send pack, buf 0x%x len %d\n", buf, length));
-+
-+	spin_lock(&np->led_lock);
-+	if (!led_active && time_after(jiffies, led_next_time)) {
-+		/* light the network leds depending on the current speed. */
-+		e100_set_network_leds(NETWORK_ACTIVITY);
-+
-+		/* Set the earliest time we may clear the LED */
-+		led_next_time = jiffies + NET_FLASH_TIME;
-+		led_active = 1;
-+		mod_timer(&clear_led_timer, jiffies + HZ/10);
-+	}
-+	spin_unlock(&np->led_lock);
-+
-+	/* configure the tx dma descriptor */
-+	myNextTxDesc->descr.sw_len = length;
-+	myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait;
-+	myNextTxDesc->descr.buf = virt_to_phys(buf);
-+
-+        /* Move end of list */
-+        myLastTxDesc->descr.ctrl &= ~d_eol;
-+        myLastTxDesc = myNextTxDesc;
-+
-+	/* Restart DMA channel */
-+	*R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart);
-+}
-+
-+static void
-+e100_clear_network_leds(unsigned long dummy)
-+{
-+	struct net_device *dev = (struct net_device *)dummy;
-+	struct net_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->led_lock);
-+
-+	if (led_active && time_after(jiffies, led_next_time)) {
-+		e100_set_network_leds(NO_NETWORK_ACTIVITY);
-+
-+		/* Set the earliest time we may set the LED */
-+		led_next_time = jiffies + NET_FLASH_PAUSE;
-+		led_active = 0;
-+	}
-+
-+	spin_unlock(&np->led_lock);
-+}
-+
-+static void
-+e100_set_network_leds(int active)
-+{
-+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
-+	int light_leds = (active == NO_NETWORK_ACTIVITY);
-+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
-+	int light_leds = (active == NETWORK_ACTIVITY);
-+#else
-+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
-+#endif
-+
-+	if (!current_speed) {
-+		/* Make LED red, link is down */
-+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
-+		CRIS_LED_NETWORK_SET(CRIS_LED_RED);
-+#else
-+		CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
-+#endif
-+	} else if (light_leds) {
-+		if (current_speed == 10) {
-+			CRIS_LED_NETWORK_SET(CRIS_LED_ORANGE);
-+		} else {
-+			CRIS_LED_NETWORK_SET(CRIS_LED_GREEN);
-+		}
-+	} else {
-+		CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
-+	}
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void
-+e100_netpoll(struct net_device* netdev)
-+{
-+	e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
-+}
-+#endif
-+
-+static int
-+etrax_init_module(void)
-+{
-+	return etrax_ethernet_init();
-+}
-+
-+static int __init
-+e100_boot_setup(char* str)
-+{
-+	struct sockaddr sa = {0};
-+	int i;
-+
-+	/* Parse the colon separated Ethernet station address */
-+	for (i = 0; i <  ETH_ALEN; i++) {
-+		unsigned int tmp;
-+		if (sscanf(str + 3*i, "%2x", &tmp) != 1) {
-+			printk(KERN_WARNING "Malformed station address");
-+			return 0;
-+		}
-+		sa.sa_data[i] = (char)tmp;
-+	}
-+
-+	default_mac = sa;
-+	return 1;
-+}
-+
-+__setup("etrax100_eth=", e100_boot_setup);
-+
-+module_init(etrax_init_module);
-diff -Nur linux-2.6.32.orig/drivers/serial/crisv10.c linux-2.6.32/drivers/serial/crisv10.c
---- linux-2.6.32.orig/drivers/serial/crisv10.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/serial/crisv10.c	2010-01-10 13:41:59.276309474 +0100
+diff -Nur linux-2.6.34.orig/drivers/serial/crisv10.c linux-2.6.34/drivers/serial/crisv10.c
+--- linux-2.6.34.orig/drivers/serial/crisv10.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/serial/crisv10.c	2010-05-25 19:41:51.550975576 +0200
 @@ -13,6 +13,7 @@
  #include <linux/errno.h>
  #include <linux/signal.h>
@@ -2205,4569 +441,9 @@ diff -Nur linux-2.6.32.orig/drivers/serial/crisv10.c linux-2.6.32/drivers/serial
  	return 0;
  }
  
-diff -Nur linux-2.6.32.orig/drivers/serial/crisv10.c.orig linux-2.6.32/drivers/serial/crisv10.c.orig
---- linux-2.6.32.orig/drivers/serial/crisv10.c.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/serial/crisv10.c.orig	2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,4556 @@
-+/*
-+ * Serial port driver for the ETRAX 100LX chip
-+ *
-+ *    Copyright (C) 1998-2007  Axis Communications AB
-+ *
-+ *    Many, many authors. Based once upon a time on serial.c for 16x50.
-+ *
-+ */
-+
-+static char *serial_version = "$Revision: 1.25 $";
-+
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/major.h>
-+#include <linux/smp_lock.h>
-+#include <linux/string.h>
-+#include <linux/fcntl.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mutex.h>
-+#include <linux/bitops.h>
-+#include <linux/seq_file.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+
-+#include <asm/irq.h>
-+#include <asm/dma.h>
-+#include <asm/system.h>
-+
-+#include <arch/svinto.h>
-+
-+/* non-arch dependent serial structures are in linux/serial.h */
-+#include <linux/serial.h>
-+/* while we keep our own stuff (struct e100_serial) in a local .h file */
-+#include "crisv10.h"
-+#include <asm/fasttimer.h>
-+#include <arch/io_interface_mux.h>
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+#ifndef CONFIG_ETRAX_FAST_TIMER
-+#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER"
-+#endif
-+#endif
-+
-+#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \
-+           (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0)
-+#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1"
-+#endif
-+
-+#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G"
-+#endif
-+
-+/*
-+ * All of the compatibilty code so we can compile serial.c against
-+ * older kernels is hidden in serial_compat.h
-+ */
-+#if defined(LOCAL_HEADERS)
-+#include "serial_compat.h"
-+#endif
-+
-+struct tty_driver *serial_driver;
-+
-+/* number of characters left in xmit buffer before we ask for more */
-+#define WAKEUP_CHARS 256
-+
-+//#define SERIAL_DEBUG_INTR
-+//#define SERIAL_DEBUG_OPEN
-+//#define SERIAL_DEBUG_FLOW
-+//#define SERIAL_DEBUG_DATA
-+//#define SERIAL_DEBUG_THROTTLE
-+//#define SERIAL_DEBUG_IO  /* Debug for Extra control and status pins */
-+//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */
-+
-+/* Enable this to use serial interrupts to handle when you
-+   expect the first received event on the serial port to
-+   be an error, break or similar. Used to be able to flash IRMA
-+   from eLinux */
-+#define SERIAL_HANDLE_EARLY_ERRORS
-+
-+/* Currently 16 descriptors x 128 bytes = 2048 bytes */
-+#define SERIAL_DESCR_BUF_SIZE 256
-+
-+#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */
-+#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE
-+
-+/* We don't want to load the system with massive fast timer interrupt
-+ * on high baudrates so limit it to 250 us (4kHz) */
-+#define MIN_FLUSH_TIME_USEC 250
-+
-+/* Add an x here to log a lot of timer stuff */
-+#define TIMERD(x)
-+/* Debug details of interrupt handling */
-+#define DINTR1(x)  /* irq on/off, errors */
-+#define DINTR2(x)    /* tx and rx */
-+/* Debug flip buffer stuff */
-+#define DFLIP(x)
-+/* Debug flow control and overview of data flow */
-+#define DFLOW(x)
-+#define DBAUD(x)
-+#define DLOG_INT_TRIG(x)
-+
-+//#define DEBUG_LOG_INCLUDED
-+#ifndef DEBUG_LOG_INCLUDED
-+#define DEBUG_LOG(line, string, value)
-+#else
-+struct debug_log_info
-+{
-+	unsigned long time;
-+	unsigned long timer_data;
-+//  int line;
-+	const char *string;
-+	int value;
-+};
-+#define DEBUG_LOG_SIZE 4096
-+
-+struct debug_log_info debug_log[DEBUG_LOG_SIZE];
-+int debug_log_pos = 0;
-+
-+#define DEBUG_LOG(_line, _string, _value) do { \
-+  if ((_line) == SERIAL_DEBUG_LINE) {\
-+    debug_log_func(_line, _string, _value); \
-+  }\
-+}while(0)
-+
-+void debug_log_func(int line, const char *string, int value)
-+{
-+	if (debug_log_pos < DEBUG_LOG_SIZE) {
-+		debug_log[debug_log_pos].time = jiffies;
-+		debug_log[debug_log_pos].timer_data = *R_TIMER_DATA;
-+//    debug_log[debug_log_pos].line = line;
-+		debug_log[debug_log_pos].string = string;
-+		debug_log[debug_log_pos].value = value;
-+		debug_log_pos++;
-+	}
-+	/*printk(string, value);*/
-+}
-+#endif
-+
-+#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS
-+/* Default number of timer ticks before flushing rx fifo
-+ * When using "little data, low latency applications: use 0
-+ * When using "much data applications (PPP)" use ~5
-+ */
-+#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5
-+#endif
-+
-+unsigned long timer_data_to_ns(unsigned long timer_data);
-+
-+static void change_speed(struct e100_serial *info);
-+static void rs_throttle(struct tty_struct * tty);
-+static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-+static int rs_write(struct tty_struct *tty,
-+		const unsigned char *buf, int count);
-+#ifdef CONFIG_ETRAX_RS485
-+static int e100_write_rs485(struct tty_struct *tty,
-+		const unsigned char *buf, int count);
-+#endif
-+static int get_lsr_info(struct e100_serial *info, unsigned int *value);
-+
-+
-+#define DEF_BAUD 115200   /* 115.2 kbit/s */
-+#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-+#define DEF_RX 0x20  /* or SERIAL_CTRL_W >> 8 */
-+/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */
-+#define DEF_TX 0x80  /* or SERIAL_CTRL_B */
-+
-+/* offsets from R_SERIALx_CTRL */
-+
-+#define REG_DATA 0
-+#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */
-+#define REG_TR_DATA 0
-+#define REG_STATUS 1
-+#define REG_TR_CTRL 1
-+#define REG_REC_CTRL 2
-+#define REG_BAUD 3
-+#define REG_XOFF 4  /* this is a 32 bit register */
-+
-+/* The bitfields are the same for all serial ports */
-+#define SER_RXD_MASK         IO_MASK(R_SERIAL0_STATUS, rxd)
-+#define SER_DATA_AVAIL_MASK  IO_MASK(R_SERIAL0_STATUS, data_avail)
-+#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err)
-+#define SER_PAR_ERR_MASK     IO_MASK(R_SERIAL0_STATUS, par_err)
-+#define SER_OVERRUN_MASK     IO_MASK(R_SERIAL0_STATUS, overrun)
-+
-+#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK)
-+
-+/* Values for info->errorcode */
-+#define ERRCODE_SET_BREAK    (TTY_BREAK)
-+#define ERRCODE_INSERT        0x100
-+#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK)
-+
-+#define FORCE_EOP(info)  *R_SET_EOP = 1U << info->iseteop;
-+
-+/*
-+ * General note regarding the use of IO_* macros in this file:
-+ *
-+ * We will use the bits defined for DMA channel 6 when using various
-+ * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are
-+ * the same for all channels (which of course they are).
-+ *
-+ * We will also use the bits defined for serial port 0 when writing commands
-+ * to the different ports, as these bits too are the same for all ports.
-+ */
-+
-+
-+/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */
-+static const unsigned long e100_ser_int_mask = 0
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready)
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready)
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready)
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready)
-+#endif
-+;
-+unsigned long r_alt_ser_baudrate_shadow = 0;
-+
-+/* this is the data for the four serial ports in the etrax100 */
-+/*  DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */
-+/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */
-+
-+static struct e100_serial rs_table[] = {
-+	{ .baud        = DEF_BAUD,
-+	  .ioport        = (unsigned char *)R_SERIAL0_CTRL,
-+	  .irq         = 1U << 12, /* uses DMA 6 and 7 */
-+	  .oclrintradr = R_DMA_CH6_CLR_INTR,
-+	  .ofirstadr   = R_DMA_CH6_FIRST,
-+	  .ocmdadr     = R_DMA_CH6_CMD,
-+	  .ostatusadr  = R_DMA_CH6_STATUS,
-+	  .iclrintradr = R_DMA_CH7_CLR_INTR,
-+	  .ifirstadr   = R_DMA_CH7_FIRST,
-+	  .icmdadr     = R_DMA_CH7_CMD,
-+	  .idescradr   = R_DMA_CH7_DESCR,
-+	  .flags       = STD_FLAGS,
-+	  .rx_ctrl     = DEF_RX,
-+	  .tx_ctrl     = DEF_TX,
-+	  .iseteop     = 2,
-+	  .dma_owner   = dma_ser0,
-+	  .io_if       = if_serial_0,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+          .enabled  = 1,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-+	  .dma_out_enabled = 1,
-+	  .dma_out_nbr = SER0_TX_DMA_NBR,
-+	  .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR,
-+	  .dma_out_irq_flags = IRQF_DISABLED,
-+	  .dma_out_irq_description = "serial 0 dma tr",
-+#else
-+	  .dma_out_enabled = 0,
-+	  .dma_out_nbr = UINT_MAX,
-+	  .dma_out_irq_nbr = 0,
-+	  .dma_out_irq_flags = 0,
-+	  .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-+	  .dma_in_enabled = 1,
-+	  .dma_in_nbr = SER0_RX_DMA_NBR,
-+	  .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR,
-+	  .dma_in_irq_flags = IRQF_DISABLED,
-+	  .dma_in_irq_description = "serial 0 dma rec",
-+#else
-+	  .dma_in_enabled = 0,
-+	  .dma_in_nbr = UINT_MAX,
-+	  .dma_in_irq_nbr = 0,
-+	  .dma_in_irq_flags = 0,
-+	  .dma_in_irq_description = NULL,
-+#endif
-+#else
-+          .enabled  = 0,
-+	  .io_if_description = NULL,
-+	  .dma_out_enabled = 0,
-+	  .dma_in_enabled = 0
-+#endif
-+
-+},  /* ttyS0 */
-+#ifndef CONFIG_SVINTO_SIM
-+	{ .baud        = DEF_BAUD,
-+	  .ioport        = (unsigned char *)R_SERIAL1_CTRL,
-+	  .irq         = 1U << 16, /* uses DMA 8 and 9 */
-+	  .oclrintradr = R_DMA_CH8_CLR_INTR,
-+	  .ofirstadr   = R_DMA_CH8_FIRST,
-+	  .ocmdadr     = R_DMA_CH8_CMD,
-+	  .ostatusadr  = R_DMA_CH8_STATUS,
-+	  .iclrintradr = R_DMA_CH9_CLR_INTR,
-+	  .ifirstadr   = R_DMA_CH9_FIRST,
-+	  .icmdadr     = R_DMA_CH9_CMD,
-+	  .idescradr   = R_DMA_CH9_DESCR,
-+	  .flags       = STD_FLAGS,
-+	  .rx_ctrl     = DEF_RX,
-+	  .tx_ctrl     = DEF_TX,
-+	  .iseteop     = 3,
-+	  .dma_owner   = dma_ser1,
-+	  .io_if       = if_serial_1,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+          .enabled  = 1,
-+	  .io_if_description = "ser1",
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
-+	  .dma_out_enabled = 1,
-+	  .dma_out_nbr = SER1_TX_DMA_NBR,
-+	  .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR,
-+	  .dma_out_irq_flags = IRQF_DISABLED,
-+	  .dma_out_irq_description = "serial 1 dma tr",
-+#else
-+	  .dma_out_enabled = 0,
-+	  .dma_out_nbr = UINT_MAX,
-+	  .dma_out_irq_nbr = 0,
-+	  .dma_out_irq_flags = 0,
-+	  .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
-+	  .dma_in_enabled = 1,
-+	  .dma_in_nbr = SER1_RX_DMA_NBR,
-+	  .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR,
-+	  .dma_in_irq_flags = IRQF_DISABLED,
-+	  .dma_in_irq_description = "serial 1 dma rec",
-+#else
-+	  .dma_in_enabled = 0,
-+	  .dma_in_enabled = 0,
-+	  .dma_in_nbr = UINT_MAX,
-+	  .dma_in_irq_nbr = 0,
-+	  .dma_in_irq_flags = 0,
-+	  .dma_in_irq_description = NULL,
-+#endif
-+#else
-+          .enabled  = 0,
-+	  .io_if_description = NULL,
-+	  .dma_in_irq_nbr = 0,
-+	  .dma_out_enabled = 0,
-+	  .dma_in_enabled = 0
-+#endif
-+},  /* ttyS1 */
-+
-+	{ .baud        = DEF_BAUD,
-+	  .ioport        = (unsigned char *)R_SERIAL2_CTRL,
-+	  .irq         = 1U << 4,  /* uses DMA 2 and 3 */
-+	  .oclrintradr = R_DMA_CH2_CLR_INTR,
-+	  .ofirstadr   = R_DMA_CH2_FIRST,
-+	  .ocmdadr     = R_DMA_CH2_CMD,
-+	  .ostatusadr  = R_DMA_CH2_STATUS,
-+	  .iclrintradr = R_DMA_CH3_CLR_INTR,
-+	  .ifirstadr   = R_DMA_CH3_FIRST,
-+	  .icmdadr     = R_DMA_CH3_CMD,
-+	  .idescradr   = R_DMA_CH3_DESCR,
-+	  .flags       = STD_FLAGS,
-+	  .rx_ctrl     = DEF_RX,
-+	  .tx_ctrl     = DEF_TX,
-+	  .iseteop     = 0,
-+	  .dma_owner   = dma_ser2,
-+	  .io_if       = if_serial_2,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+          .enabled  = 1,
-+	  .io_if_description = "ser2",
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-+	  .dma_out_enabled = 1,
-+	  .dma_out_nbr = SER2_TX_DMA_NBR,
-+	  .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR,
-+	  .dma_out_irq_flags = IRQF_DISABLED,
-+	  .dma_out_irq_description = "serial 2 dma tr",
-+#else
-+	  .dma_out_enabled = 0,
-+	  .dma_out_nbr = UINT_MAX,
-+	  .dma_out_irq_nbr = 0,
-+	  .dma_out_irq_flags = 0,
-+	  .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-+	  .dma_in_enabled = 1,
-+	  .dma_in_nbr = SER2_RX_DMA_NBR,
-+	  .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR,
-+	  .dma_in_irq_flags = IRQF_DISABLED,
-+	  .dma_in_irq_description = "serial 2 dma rec",
-+#else
-+	  .dma_in_enabled = 0,
-+	  .dma_in_nbr = UINT_MAX,
-+	  .dma_in_irq_nbr = 0,
-+	  .dma_in_irq_flags = 0,
-+	  .dma_in_irq_description = NULL,
-+#endif
-+#else
-+          .enabled  = 0,
-+	  .io_if_description = NULL,
-+	  .dma_out_enabled = 0,
-+	  .dma_in_enabled = 0
-+#endif
-+ },  /* ttyS2 */
-+
-+	{ .baud        = DEF_BAUD,
-+	  .ioport        = (unsigned char *)R_SERIAL3_CTRL,
-+	  .irq         = 1U << 8,  /* uses DMA 4 and 5 */
-+	  .oclrintradr = R_DMA_CH4_CLR_INTR,
-+	  .ofirstadr   = R_DMA_CH4_FIRST,
-+	  .ocmdadr     = R_DMA_CH4_CMD,
-+	  .ostatusadr  = R_DMA_CH4_STATUS,
-+	  .iclrintradr = R_DMA_CH5_CLR_INTR,
-+	  .ifirstadr   = R_DMA_CH5_FIRST,
-+	  .icmdadr     = R_DMA_CH5_CMD,
-+	  .idescradr   = R_DMA_CH5_DESCR,
-+	  .flags       = STD_FLAGS,
-+	  .rx_ctrl     = DEF_RX,
-+	  .tx_ctrl     = DEF_TX,
-+	  .iseteop     = 1,
-+	  .dma_owner   = dma_ser3,
-+	  .io_if       = if_serial_3,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+          .enabled  = 1,
-+	  .io_if_description = "ser3",
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
-+	  .dma_out_enabled = 1,
-+	  .dma_out_nbr = SER3_TX_DMA_NBR,
-+	  .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR,
-+	  .dma_out_irq_flags = IRQF_DISABLED,
-+	  .dma_out_irq_description = "serial 3 dma tr",
-+#else
-+	  .dma_out_enabled = 0,
-+	  .dma_out_nbr = UINT_MAX,
-+	  .dma_out_irq_nbr = 0,
-+	  .dma_out_irq_flags = 0,
-+	  .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
-+	  .dma_in_enabled = 1,
-+	  .dma_in_nbr = SER3_RX_DMA_NBR,
-+	  .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR,
-+	  .dma_in_irq_flags = IRQF_DISABLED,
-+	  .dma_in_irq_description = "serial 3 dma rec",
-+#else
-+	  .dma_in_enabled = 0,
-+	  .dma_in_nbr = UINT_MAX,
-+	  .dma_in_irq_nbr = 0,
-+	  .dma_in_irq_flags = 0,
-+	  .dma_in_irq_description = NULL
-+#endif
-+#else
-+          .enabled  = 0,
-+	  .io_if_description = NULL,
-+	  .dma_out_enabled = 0,
-+	  .dma_in_enabled = 0
-+#endif
-+ }   /* ttyS3 */
-+#endif
-+};
-+
-+
-+#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+static struct fast_timer fast_timers[NR_PORTS];
-+#endif
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY
-+#define PROCSTAT(x) x
-+struct ser_statistics_type {
-+	int overrun_cnt;
-+	int early_errors_cnt;
-+	int ser_ints_ok_cnt;
-+	int errors_cnt;
-+	unsigned long int processing_flip;
-+	unsigned long processing_flip_still_room;
-+	unsigned long int timeout_flush_cnt;
-+	int rx_dma_ints;
-+	int tx_dma_ints;
-+	int rx_tot;
-+	int tx_tot;
-+};
-+
-+static struct ser_statistics_type ser_stat[NR_PORTS];
-+
-+#else
-+
-+#define PROCSTAT(x)
-+
-+#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */
-+
-+/* RS-485 */
-+#if defined(CONFIG_ETRAX_RS485)
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+static struct fast_timer fast_timers_rs485[NR_PORTS];
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT;
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT;
-+#endif
-+#endif
-+
-+/* Info and macros needed for each ports extra control/status signals. */
-+#define E100_STRUCT_PORT(line, pinname) \
-+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
-+		(R_PORT_PA_DATA): ( \
-+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
-+		(R_PORT_PB_DATA):&dummy_ser[line]))
-+
-+#define E100_STRUCT_SHADOW(line, pinname) \
-+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
-+		(&port_pa_data_shadow): ( \
-+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
-+		(&port_pb_data_shadow):&dummy_ser[line]))
-+#define E100_STRUCT_MASK(line, pinname) \
-+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
-+		(1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT): ( \
-+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
-+		(1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT):DUMMY_##pinname##_MASK))
-+
-+#define DUMMY_DTR_MASK 1
-+#define DUMMY_RI_MASK  2
-+#define DUMMY_DSR_MASK 4
-+#define DUMMY_CD_MASK  8
-+static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF};
-+
-+/* If not all status pins are used or disabled, use mixed mode */
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+
-+#define SER0_PA_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PA_BIT+CONFIG_ETRAX_SER0_RI_ON_PA_BIT+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT+CONFIG_ETRAX_SER0_CD_ON_PA_BIT)
-+
-+#if SER0_PA_BITSUM != -4
-+#  if CONFIG_ETRAX_SER0_DTR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER0_RI_ON_PA_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER0_DSR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER0_CD_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#define SER0_PB_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PB_BIT+CONFIG_ETRAX_SER0_RI_ON_PB_BIT+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT+CONFIG_ETRAX_SER0_CD_ON_PB_BIT)
-+
-+#if SER0_PB_BITSUM != -4
-+#  if CONFIG_ETRAX_SER0_DTR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER0_RI_ON_PB_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER0_DSR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER0_CD_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#endif /* PORT0 */
-+
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+
-+#define SER1_PA_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PA_BIT+CONFIG_ETRAX_SER1_RI_ON_PA_BIT+CONFIG_ETRAX_SER1_DSR_ON_PA_BIT+CONFIG_ETRAX_SER1_CD_ON_PA_BIT)
-+
-+#if SER1_PA_BITSUM != -4
-+#  if CONFIG_ETRAX_SER1_DTR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER1_RI_ON_PA_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER1_DSR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER1_CD_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#define SER1_PB_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PB_BIT+CONFIG_ETRAX_SER1_RI_ON_PB_BIT+CONFIG_ETRAX_SER1_DSR_ON_PB_BIT+CONFIG_ETRAX_SER1_CD_ON_PB_BIT)
-+
-+#if SER1_PB_BITSUM != -4
-+#  if CONFIG_ETRAX_SER1_DTR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER1_RI_ON_PB_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER1_DSR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER1_CD_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#endif /* PORT1 */
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+
-+#define SER2_PA_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PA_BIT+CONFIG_ETRAX_SER2_RI_ON_PA_BIT+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT+CONFIG_ETRAX_SER2_CD_ON_PA_BIT)
-+
-+#if SER2_PA_BITSUM != -4
-+#  if CONFIG_ETRAX_SER2_DTR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER2_RI_ON_PA_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER2_DSR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER2_CD_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#define SER2_PB_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PB_BIT+CONFIG_ETRAX_SER2_RI_ON_PB_BIT+CONFIG_ETRAX_SER2_DSR_ON_PB_BIT+CONFIG_ETRAX_SER2_CD_ON_PB_BIT)
-+
-+#if SER2_PB_BITSUM != -4
-+#  if CONFIG_ETRAX_SER2_DTR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER2_RI_ON_PB_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER2_DSR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER2_CD_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#endif /* PORT2 */
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+
-+#define SER3_PA_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PA_BIT+CONFIG_ETRAX_SER3_RI_ON_PA_BIT+CONFIG_ETRAX_SER3_DSR_ON_PA_BIT+CONFIG_ETRAX_SER3_CD_ON_PA_BIT)
-+
-+#if SER3_PA_BITSUM != -4
-+#  if CONFIG_ETRAX_SER3_DTR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER3_RI_ON_PA_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER3_DSR_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER3_CD_ON_PA_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#define SER3_PB_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PB_BIT+CONFIG_ETRAX_SER3_RI_ON_PB_BIT+CONFIG_ETRAX_SER3_DSR_ON_PB_BIT+CONFIG_ETRAX_SER3_CD_ON_PB_BIT)
-+
-+#if SER3_PB_BITSUM != -4
-+#  if CONFIG_ETRAX_SER3_DTR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#   endif
-+# if CONFIG_ETRAX_SER3_RI_ON_PB_BIT == -1
-+#   ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#     define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#   endif
-+#  endif
-+#  if CONFIG_ETRAX_SER3_DSR_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#  if CONFIG_ETRAX_SER3_CD_ON_PB_BIT == -1
-+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+#    endif
-+#  endif
-+#endif
-+
-+#endif /* PORT3 */
-+
-+
-+#if defined(CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED) || \
-+    defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \
-+    defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \
-+    defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED)
-+#define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
-+#endif
-+
-+#ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
-+/* The pins can be mixed on PA and PB */
-+#define CONTROL_PINS_PORT_NOT_USED(line) \
-+  &dummy_ser[line], &dummy_ser[line], \
-+  &dummy_ser[line], &dummy_ser[line], \
-+  &dummy_ser[line], &dummy_ser[line], \
-+  &dummy_ser[line], &dummy_ser[line], \
-+  DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
-+
-+
-+struct control_pins
-+{
-+	volatile unsigned char *dtr_port;
-+	unsigned char          *dtr_shadow;
-+	volatile unsigned char *ri_port;
-+	unsigned char          *ri_shadow;
-+	volatile unsigned char *dsr_port;
-+	unsigned char          *dsr_shadow;
-+	volatile unsigned char *cd_port;
-+	unsigned char          *cd_shadow;
-+
-+	unsigned char dtr_mask;
-+	unsigned char ri_mask;
-+	unsigned char dsr_mask;
-+	unsigned char cd_mask;
-+};
-+
-+static const struct control_pins e100_modem_pins[NR_PORTS] =
-+{
-+	/* Ser 0 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+	E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
-+	E100_STRUCT_PORT(0,RI),  E100_STRUCT_SHADOW(0,RI),
-+	E100_STRUCT_PORT(0,DSR), E100_STRUCT_SHADOW(0,DSR),
-+	E100_STRUCT_PORT(0,CD),  E100_STRUCT_SHADOW(0,CD),
-+	E100_STRUCT_MASK(0,DTR),
-+	E100_STRUCT_MASK(0,RI),
-+	E100_STRUCT_MASK(0,DSR),
-+	E100_STRUCT_MASK(0,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(0)
-+#endif
-+	},
-+
-+	/* Ser 1 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+	E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
-+	E100_STRUCT_PORT(1,RI),  E100_STRUCT_SHADOW(1,RI),
-+	E100_STRUCT_PORT(1,DSR), E100_STRUCT_SHADOW(1,DSR),
-+	E100_STRUCT_PORT(1,CD),  E100_STRUCT_SHADOW(1,CD),
-+	E100_STRUCT_MASK(1,DTR),
-+	E100_STRUCT_MASK(1,RI),
-+	E100_STRUCT_MASK(1,DSR),
-+	E100_STRUCT_MASK(1,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(1)
-+#endif
-+	},
-+
-+	/* Ser 2 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+	E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
-+	E100_STRUCT_PORT(2,RI),  E100_STRUCT_SHADOW(2,RI),
-+	E100_STRUCT_PORT(2,DSR), E100_STRUCT_SHADOW(2,DSR),
-+	E100_STRUCT_PORT(2,CD),  E100_STRUCT_SHADOW(2,CD),
-+	E100_STRUCT_MASK(2,DTR),
-+	E100_STRUCT_MASK(2,RI),
-+	E100_STRUCT_MASK(2,DSR),
-+	E100_STRUCT_MASK(2,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(2)
-+#endif
-+	},
-+
-+	/* Ser 3 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+	E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
-+	E100_STRUCT_PORT(3,RI),  E100_STRUCT_SHADOW(3,RI),
-+	E100_STRUCT_PORT(3,DSR), E100_STRUCT_SHADOW(3,DSR),
-+	E100_STRUCT_PORT(3,CD),  E100_STRUCT_SHADOW(3,CD),
-+	E100_STRUCT_MASK(3,DTR),
-+	E100_STRUCT_MASK(3,RI),
-+	E100_STRUCT_MASK(3,DSR),
-+	E100_STRUCT_MASK(3,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(3)
-+#endif
-+	}
-+};
-+#else  /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
-+
-+/* All pins are on either PA or PB for each serial port */
-+#define CONTROL_PINS_PORT_NOT_USED(line) \
-+  &dummy_ser[line], &dummy_ser[line], \
-+  DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
-+
-+
-+struct control_pins
-+{
-+	volatile unsigned char *port;
-+	unsigned char          *shadow;
-+
-+	unsigned char dtr_mask;
-+	unsigned char ri_mask;
-+	unsigned char dsr_mask;
-+	unsigned char cd_mask;
-+};
-+
-+#define dtr_port port
-+#define dtr_shadow shadow
-+#define ri_port port
-+#define ri_shadow shadow
-+#define dsr_port port
-+#define dsr_shadow shadow
-+#define cd_port port
-+#define cd_shadow shadow
-+
-+static const struct control_pins e100_modem_pins[NR_PORTS] =
-+{
-+	/* Ser 0 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+	E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
-+	E100_STRUCT_MASK(0,DTR),
-+	E100_STRUCT_MASK(0,RI),
-+	E100_STRUCT_MASK(0,DSR),
-+	E100_STRUCT_MASK(0,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(0)
-+#endif
-+	},
-+
-+	/* Ser 1 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+	E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
-+	E100_STRUCT_MASK(1,DTR),
-+	E100_STRUCT_MASK(1,RI),
-+	E100_STRUCT_MASK(1,DSR),
-+	E100_STRUCT_MASK(1,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(1)
-+#endif
-+	},
-+
-+	/* Ser 2 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+	E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
-+	E100_STRUCT_MASK(2,DTR),
-+	E100_STRUCT_MASK(2,RI),
-+	E100_STRUCT_MASK(2,DSR),
-+	E100_STRUCT_MASK(2,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(2)
-+#endif
-+	},
-+
-+	/* Ser 3 */
-+	{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+	E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
-+	E100_STRUCT_MASK(3,DTR),
-+	E100_STRUCT_MASK(3,RI),
-+	E100_STRUCT_MASK(3,DSR),
-+	E100_STRUCT_MASK(3,CD)
-+#else
-+	CONTROL_PINS_PORT_NOT_USED(3)
-+#endif
-+	}
-+};
-+#endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
-+
-+#define E100_RTS_MASK 0x20
-+#define E100_CTS_MASK 0x40
-+
-+/* All serial port signals are active low:
-+ * active   = 0 -> 3.3V to RS-232 driver -> -12V on RS-232 level
-+ * inactive = 1 -> 0V   to RS-232 driver -> +12V on RS-232 level
-+ *
-+ * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip
-+ */
-+
-+/* Output */
-+#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK)
-+/* Input */
-+#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK)
-+
-+/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */
-+/* Is an output */
-+#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask)
-+
-+/* Normally inputs */
-+#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask)
-+#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask)
-+
-+/* Input */
-+#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask)
-+
-+
-+/*
-+ * tmp_buf is used as a temporary buffer by serial_write.  We need to
-+ * lock it in case the memcpy_fromfs blocks while swapping in a page,
-+ * and some other program tries to do a serial write at the same time.
-+ * Since the lock will only come under contention when the system is
-+ * swapping and available memory is low, it makes sense to share one
-+ * buffer across all the serial ports, since it significantly saves
-+ * memory if large numbers of serial ports are open.
-+ */
-+static unsigned char *tmp_buf;
-+static DEFINE_MUTEX(tmp_buf_mutex);
-+
-+/* Calculate the chartime depending on baudrate, numbor of bits etc. */
-+static void update_char_time(struct e100_serial * info)
-+{
-+	tcflag_t cflags = info->port.tty->termios->c_cflag;
-+	int bits;
-+
-+	/* calc. number of bits / data byte */
-+	/* databits + startbit and 1 stopbit */
-+	if ((cflags & CSIZE) == CS7)
-+		bits = 9;
-+	else
-+		bits = 10;
-+
-+	if (cflags & CSTOPB)     /* 2 stopbits ? */
-+		bits++;
-+
-+	if (cflags & PARENB)     /* parity bit ? */
-+		bits++;
-+
-+	/* calc timeout */
-+	info->char_time_usec = ((bits * 1000000) / info->baud) + 1;
-+	info->flush_time_usec = 4*info->char_time_usec;
-+	if (info->flush_time_usec < MIN_FLUSH_TIME_USEC)
-+		info->flush_time_usec = MIN_FLUSH_TIME_USEC;
-+
-+}
-+
-+/*
-+ * This function maps from the Bxxxx defines in asm/termbits.h into real
-+ * baud rates.
-+ */
-+
-+static int
-+cflag_to_baud(unsigned int cflag)
-+{
-+	static int baud_table[] = {
-+		0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
-+		4800, 9600, 19200, 38400 };
-+
-+	static int ext_baud_table[] = {
-+		0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000,
-+                0, 0, 0, 0, 0, 0, 0, 0 };
-+
-+	if (cflag & CBAUDEX)
-+		return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
-+	else
-+		return baud_table[cflag & CBAUD];
-+}
-+
-+/* and this maps to an etrax100 hardware baud constant */
-+
-+static unsigned char
-+cflag_to_etrax_baud(unsigned int cflag)
-+{
-+	char retval;
-+
-+	static char baud_table[] = {
-+		-1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 };
-+
-+	static char ext_baud_table[] = {
-+		-1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 };
-+
-+	if (cflag & CBAUDEX)
-+		retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
-+	else
-+		retval = baud_table[cflag & CBAUD];
-+
-+	if (retval < 0) {
-+		printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag);
-+		retval = 5; /* choose default 9600 instead */
-+	}
-+
-+	return retval | (retval << 4); /* choose same for both TX and RX */
-+}
-+
-+
-+/* Various static support functions */
-+
-+/* Functions to set or clear DTR/RTS on the requested line */
-+/* It is complicated by the fact that RTS is a serial port register, while
-+ * DTR might not be implemented in the HW at all, and if it is, it can be on
-+ * any general port.
-+ */
-+
-+
-+static inline void
-+e100_dtr(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+	unsigned char mask = e100_modem_pins[info->line].dtr_mask;
-+
-+#ifdef SERIAL_DEBUG_IO
-+	printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask);
-+	printk("ser%i shadow before 0x%02X get: %i\n",
-+	       info->line, *e100_modem_pins[info->line].dtr_shadow,
-+	       E100_DTR_GET(info));
-+#endif
-+	/* DTR is active low */
-+	{
-+		unsigned long flags;
-+
-+		local_irq_save(flags);
-+		*e100_modem_pins[info->line].dtr_shadow &= ~mask;
-+		*e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask);
-+		*e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow;
-+		local_irq_restore(flags);
-+	}
-+
-+#ifdef SERIAL_DEBUG_IO
-+	printk("ser%i shadow after 0x%02X get: %i\n",
-+	       info->line, *e100_modem_pins[info->line].dtr_shadow,
-+	       E100_DTR_GET(info));
-+#endif
-+#endif
-+}
-+
-+/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
-+ *                                          0=0V    , 1=3.3V
-+ */
-+static inline void
-+e100_rts(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+	unsigned long flags;
-+	local_irq_save(flags);
-+	info->rx_ctrl &= ~E100_RTS_MASK;
-+	info->rx_ctrl |= (set ? 0 : E100_RTS_MASK);  /* RTS is active low */
-+	info->ioport[REG_REC_CTRL] = info->rx_ctrl;
-+	local_irq_restore(flags);
-+#ifdef SERIAL_DEBUG_IO
-+	printk("ser%i rts %i\n", info->line, set);
-+#endif
-+#endif
-+}
-+
-+
-+/* If this behaves as a modem, RI and CD is an output */
-+static inline void
-+e100_ri_out(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+	/* RI is active low */
-+	{
-+		unsigned char mask = e100_modem_pins[info->line].ri_mask;
-+		unsigned long flags;
-+
-+		local_irq_save(flags);
-+		*e100_modem_pins[info->line].ri_shadow &= ~mask;
-+		*e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask);
-+		*e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
-+		local_irq_restore(flags);
-+	}
-+#endif
-+}
-+static inline void
-+e100_cd_out(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+	/* CD is active low */
-+	{
-+		unsigned char mask = e100_modem_pins[info->line].cd_mask;
-+		unsigned long flags;
-+
-+		local_irq_save(flags);
-+		*e100_modem_pins[info->line].cd_shadow &= ~mask;
-+		*e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask);
-+		*e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
-+		local_irq_restore(flags);
-+	}
-+#endif
-+}
-+
-+static inline void
-+e100_disable_rx(struct e100_serial *info)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+	/* disable the receiver */
-+	info->ioport[REG_REC_CTRL] =
-+		(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-+#endif
-+}
-+
-+static inline void
-+e100_enable_rx(struct e100_serial *info)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+	/* enable the receiver */
-+	info->ioport[REG_REC_CTRL] =
-+		(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-+#endif
-+}
-+
-+/* the rx DMA uses both the dma_descr and the dma_eop interrupts */
-+
-+static inline void
-+e100_disable_rxdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("rxdma_irq(%d): 0\n",info->line);
-+#endif
-+	DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line));
-+	*R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3);
-+}
-+
-+static inline void
-+e100_enable_rxdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("rxdma_irq(%d): 1\n",info->line);
-+#endif
-+	DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line));
-+	*R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3);
-+}
-+
-+/* the tx DMA uses only dma_descr interrupt */
-+
-+static void e100_disable_txdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("txdma_irq(%d): 0\n",info->line);
-+#endif
-+	DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line));
-+	*R_IRQ_MASK2_CLR = info->irq;
-+}
-+
-+static void e100_enable_txdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("txdma_irq(%d): 1\n",info->line);
-+#endif
-+	DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line));
-+	*R_IRQ_MASK2_SET = info->irq;
-+}
-+
-+static void e100_disable_txdma_channel(struct e100_serial *info)
-+{
-+	unsigned long flags;
-+
-+	/* Disable output DMA channel for the serial port in question
-+	 * ( set to something other than serialX)
-+	 */
-+	local_irq_save(flags);
-+	DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
-+	if (info->line == 0) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma6, serial0)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma6);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
-+		}
-+	} else if (info->line == 1) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma8, serial1)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma8);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
-+		}
-+	} else if (info->line == 2) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma2, serial2)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma2);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
-+		}
-+	} else if (info->line == 3) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma4, serial3)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma4);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1);
-+		}
-+	}
-+	*R_GEN_CONFIG = genconfig_shadow;
-+	local_irq_restore(flags);
-+}
-+
-+
-+static void e100_enable_txdma_channel(struct e100_serial *info)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line));
-+	/* Enable output DMA channel for the serial port in question */
-+	if (info->line == 0) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma6);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0);
-+	} else if (info->line == 1) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma8);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1);
-+	} else if (info->line == 2) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma2);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2);
-+	} else if (info->line == 3) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma4);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3);
-+	}
-+	*R_GEN_CONFIG = genconfig_shadow;
-+	local_irq_restore(flags);
-+}
-+
-+static void e100_disable_rxdma_channel(struct e100_serial *info)
-+{
-+	unsigned long flags;
-+
-+	/* Disable input DMA channel for the serial port in question
-+	 * ( set to something other than serialX)
-+	 */
-+	local_irq_save(flags);
-+	if (info->line == 0) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma7, serial0)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma7);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused);
-+		}
-+	} else if (info->line == 1) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma9, serial1)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma9);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb);
-+		}
-+	} else if (info->line == 2) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma3, serial2)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma3);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0);
-+		}
-+	} else if (info->line == 3) {
-+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) ==
-+		    IO_STATE(R_GEN_CONFIG, dma5, serial3)) {
-+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma5);
-+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1);
-+		}
-+	}
-+	*R_GEN_CONFIG = genconfig_shadow;
-+	local_irq_restore(flags);
-+}
-+
-+
-+static void e100_enable_rxdma_channel(struct e100_serial *info)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	/* Enable input DMA channel for the serial port in question */
-+	if (info->line == 0) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma7);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0);
-+	} else if (info->line == 1) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma9);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1);
-+	} else if (info->line == 2) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma3);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2);
-+	} else if (info->line == 3) {
-+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma5);
-+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3);
-+	}
-+	*R_GEN_CONFIG = genconfig_shadow;
-+	local_irq_restore(flags);
-+}
-+
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+/* in order to detect and fix errors on the first byte
-+   we have to use the serial interrupts as well. */
-+
-+static inline void
-+e100_disable_serial_data_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("ser_irq(%d): 0\n",info->line);
-+#endif
-+	DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line));
-+	*R_IRQ_MASK1_CLR = (1U << (8+2*info->line));
-+}
-+
-+static inline void
-+e100_enable_serial_data_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("ser_irq(%d): 1\n",info->line);
-+	printk("**** %d = %d\n",
-+	       (8+2*info->line),
-+	       (1U << (8+2*info->line)));
-+#endif
-+	DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line));
-+	*R_IRQ_MASK1_SET = (1U << (8+2*info->line));
-+}
-+#endif
-+
-+static inline void
-+e100_disable_serial_tx_ready_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("ser_tx_irq(%d): 0\n",info->line);
-+#endif
-+	DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line));
-+	*R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line));
-+}
-+
-+static inline void
-+e100_enable_serial_tx_ready_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("ser_tx_irq(%d): 1\n",info->line);
-+	printk("**** %d = %d\n",
-+	       (8+1+2*info->line),
-+	       (1U << (8+1+2*info->line)));
-+#endif
-+	DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line));
-+	*R_IRQ_MASK1_SET = (1U << (8+1+2*info->line));
-+}
-+
-+static inline void e100_enable_rx_irq(struct e100_serial *info)
-+{
-+	if (info->uses_dma_in)
-+		e100_enable_rxdma_irq(info);
-+	else
-+		e100_enable_serial_data_irq(info);
-+}
-+static inline void e100_disable_rx_irq(struct e100_serial *info)
-+{
-+	if (info->uses_dma_in)
-+		e100_disable_rxdma_irq(info);
-+	else
-+		e100_disable_serial_data_irq(info);
-+}
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+/* Enable RS-485 mode on selected port. This is UGLY. */
-+static int
-+e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
-+{
-+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+	*R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+	REG_SHADOW_SET(R_PORT_G_DATA,  port_g_data_shadow,
-+		       rs485_port_g_bit, 1);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_LTC1387)
-+	REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+		       CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1);
-+	REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+		       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
-+#endif
-+
-+	info->rs485.flags = r->flags;
-+	if (r->delay_rts_before_send >= 1000)
-+		info->rs485.delay_rts_before_send = 1000;
-+	else
-+		info->rs485.delay_rts_before_send = r->delay_rts_before_send;
-+/*	printk("rts: on send = %i, after = %i, enabled = %i",
-+		    info->rs485.rts_on_send,
-+		    info->rs485.rts_after_sent,
-+		    info->rs485.enabled
-+	);
-+*/
-+	return 0;
-+}
-+
-+static int
-+e100_write_rs485(struct tty_struct *tty,
-+                 const unsigned char *buf, int count)
-+{
-+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+	int old_value = (info->rs485.flags) & SER_RS485_ENABLED;
-+
-+	/* rs485 is always implicitly enabled if we're using the ioctl()
-+	 * but it doesn't have to be set in the serial_rs485
-+	 * (to be backward compatible with old apps)
-+	 * So we store, set and restore it.
-+	 */
-+	info->rs485.flags |= SER_RS485_ENABLED;
-+	/* rs_write now deals with RS485 if enabled */
-+	count = rs_write(tty, buf, count);
-+	if (!old_value)
-+		info->rs485.flags &= ~(SER_RS485_ENABLED);
-+	return count;
-+}
-+
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+/* Timer function to toggle RTS when using FAST_TIMER */
-+static void rs485_toggle_rts_timer_function(unsigned long data)
-+{
-+	struct e100_serial *info = (struct e100_serial *)data;
-+
-+	fast_timers_rs485[info->line].function = NULL;
-+	e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
-+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
-+	e100_enable_rx(info);
-+	e100_enable_rx_irq(info);
-+#endif
-+}
-+#endif
-+#endif /* CONFIG_ETRAX_RS485 */
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_stop() and rs_start()
-+ *
-+ * This routines are called before setting or resetting tty->stopped.
-+ * They enable or disable transmitter using the XOFF registers, as necessary.
-+ * ------------------------------------------------------------
-+ */
-+
-+static void
-+rs_stop(struct tty_struct *tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	if (info) {
-+		unsigned long flags;
-+		unsigned long xoff;
-+
-+		local_irq_save(flags);
-+		DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n",
-+				CIRC_CNT(info->xmit.head,
-+					 info->xmit.tail,SERIAL_XMIT_SIZE)));
-+
-+		xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
-+				STOP_CHAR(info->port.tty));
-+		xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
-+		if (tty->termios->c_iflag & IXON ) {
-+			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
-+		}
-+
-+		*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
-+		local_irq_restore(flags);
-+	}
-+}
-+
-+static void
-+rs_start(struct tty_struct *tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	if (info) {
-+		unsigned long flags;
-+		unsigned long xoff;
-+
-+		local_irq_save(flags);
-+		DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n",
-+				CIRC_CNT(info->xmit.head,
-+					 info->xmit.tail,SERIAL_XMIT_SIZE)));
-+		xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
-+		xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-+		if (tty->termios->c_iflag & IXON ) {
-+			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
-+		}
-+
-+		*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
-+		if (!info->uses_dma_out &&
-+		    info->xmit.head != info->xmit.tail && info->xmit.buf)
-+			e100_enable_serial_tx_ready_irq(info);
-+
-+		local_irq_restore(flags);
-+	}
-+}
-+
-+/*
-+ * ----------------------------------------------------------------------
-+ *
-+ * Here starts the interrupt handling routines.  All of the following
-+ * subroutines are declared as inline and are folded into
-+ * rs_interrupt().  They were separated out for readability's sake.
-+ *
-+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
-+ * runs with interrupts turned off.  People who may want to modify
-+ * rs_interrupt() should try to keep the interrupt handler as fast as
-+ * possible.  After you are done making modifications, it is not a bad
-+ * idea to do:
-+ *
-+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
-+ *
-+ * and look at the resulting assemble code in serial.s.
-+ *
-+ * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
-+ * -----------------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine is used by the interrupt handler to schedule
-+ * processing in the software interrupt portion of the driver.
-+ */
-+static void rs_sched_event(struct e100_serial *info, int event)
-+{
-+	if (info->event & (1 << event))
-+		return;
-+	info->event |= 1 << event;
-+	schedule_work(&info->work);
-+}
-+
-+/* The output DMA channel is free - use it to send as many chars as possible
-+ * NOTES:
-+ *   We don't pay attention to info->x_char, which means if the TTY wants to
-+ *   use XON/XOFF it will set info->x_char but we won't send any X char!
-+ *
-+ *   To implement this, we'd just start a DMA send of 1 byte pointing at a
-+ *   buffer containing the X char, and skip updating xmit. We'd also have to
-+ *   check if the last sent char was the X char when we enter this function
-+ *   the next time, to avoid updating xmit with the sent X value.
-+ */
-+
-+static void
-+transmit_chars_dma(struct e100_serial *info)
-+{
-+	unsigned int c, sentl;
-+	struct etrax_dma_descr *descr;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+	/* This will output too little if tail is not 0 always since
-+	 * we don't reloop to send the other part. Anyway this SHOULD be a
-+	 * no-op - transmit_chars_dma would never really be called during sim
-+	 * since rs_write does not write into the xmit buffer then.
-+	 */
-+	if (info->xmit.tail)
-+		printk("Error in serial.c:transmit_chars-dma(), tail!=0\n");
-+	if (info->xmit.head != info->xmit.tail) {
-+		SIMCOUT(info->xmit.buf + info->xmit.tail,
-+			CIRC_CNT(info->xmit.head,
-+				 info->xmit.tail,
-+				 SERIAL_XMIT_SIZE));
-+		info->xmit.head = info->xmit.tail;  /* move back head */
-+		info->tr_running = 0;
-+	}
-+	return;
-+#endif
-+	/* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
-+	*info->oclrintradr =
-+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+
-+#ifdef SERIAL_DEBUG_INTR
-+	if (info->line == SERIAL_DEBUG_LINE)
-+		printk("tc\n");
-+#endif
-+	if (!info->tr_running) {
-+		/* weirdo... we shouldn't get here! */
-+		printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n");
-+		return;
-+	}
-+
-+	descr = &info->tr_descr;
-+
-+	/* first get the amount of bytes sent during the last DMA transfer,
-+	   and update xmit accordingly */
-+
-+	/* if the stop bit was not set, all data has been sent */
-+	if (!(descr->status & d_stop)) {
-+		sentl = descr->sw_len;
-+	} else
-+		/* otherwise we find the amount of data sent here */
-+		sentl = descr->hw_len;
-+
-+	DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl));
-+
-+	/* update stats */
-+	info->icount.tx += sentl;
-+
-+	/* update xmit buffer */
-+	info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1);
-+
-+	/* if there is only a few chars left in the buf, wake up the blocked
-+	   write if any */
-+	if (CIRC_CNT(info->xmit.head,
-+		     info->xmit.tail,
-+		     SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
-+		rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-+
-+	/* find out the largest amount of consecutive bytes we want to send now */
-+
-+	c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+
-+	/* Don't send all in one DMA transfer - divide it so we wake up
-+	 * application before all is sent
-+	 */
-+
-+	if (c >= 4*WAKEUP_CHARS)
-+		c = c/2;
-+
-+	if (c <= 0) {
-+		/* our job here is done, don't schedule any new DMA transfer */
-+		info->tr_running = 0;
-+
-+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-+		if (info->rs485.flags & SER_RS485_ENABLED) {
-+			/* Set a short timer to toggle RTS */
-+			start_one_shot_timer(&fast_timers_rs485[info->line],
-+			                     rs485_toggle_rts_timer_function,
-+			                     (unsigned long)info,
-+			                     info->char_time_usec*2,
-+			                     "RS-485");
-+		}
-+#endif /* RS485 */
-+		return;
-+	}
-+
-+	/* ok we can schedule a dma send of c chars starting at info->xmit.tail */
-+	/* set up the descriptor correctly for output */
-+	DFLOW(DEBUG_LOG(info->line, "TX %i\n", c));
-+	descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */
-+	descr->sw_len = c;
-+	descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail);
-+	descr->status = 0;
-+
-+	*info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */
-+	*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
-+
-+	/* DMA is now running (hopefully) */
-+} /* transmit_chars_dma */
-+
-+static void
-+start_transmit(struct e100_serial *info)
-+{
-+#if 0
-+	if (info->line == SERIAL_DEBUG_LINE)
-+		printk("x\n");
-+#endif
-+
-+	info->tr_descr.sw_len = 0;
-+	info->tr_descr.hw_len = 0;
-+	info->tr_descr.status = 0;
-+	info->tr_running = 1;
-+	if (info->uses_dma_out)
-+		transmit_chars_dma(info);
-+	else
-+		e100_enable_serial_tx_ready_irq(info);
-+} /* start_transmit */
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+static int serial_fast_timer_started = 0;
-+static int serial_fast_timer_expired = 0;
-+static void flush_timeout_function(unsigned long data);
-+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\
-+  unsigned long timer_flags; \
-+  local_irq_save(timer_flags); \
-+  if (fast_timers[info->line].function == NULL) { \
-+    serial_fast_timer_started++; \
-+    TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \
-+    TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \
-+    start_one_shot_timer(&fast_timers[info->line], \
-+                         flush_timeout_function, \
-+                         (unsigned long)info, \
-+                         (usec), \
-+                         string); \
-+  } \
-+  else { \
-+    TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \
-+  } \
-+  local_irq_restore(timer_flags); \
-+}
-+#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec)
-+
-+#else
-+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec)
-+#define START_FLUSH_FAST_TIMER(info, string)
-+#endif
-+
-+static struct etrax_recv_buffer *
-+alloc_recv_buffer(unsigned int size)
-+{
-+	struct etrax_recv_buffer *buffer;
-+
-+	if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
-+		return NULL;
-+
-+	buffer->next = NULL;
-+	buffer->length = 0;
-+	buffer->error = TTY_NORMAL;
-+
-+	return buffer;
-+}
-+
-+static void
-+append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	if (!info->first_recv_buffer)
-+		info->first_recv_buffer = buffer;
-+	else
-+		info->last_recv_buffer->next = buffer;
-+
-+	info->last_recv_buffer = buffer;
-+
-+	info->recv_cnt += buffer->length;
-+	if (info->recv_cnt > info->max_recv_cnt)
-+		info->max_recv_cnt = info->recv_cnt;
-+
-+	local_irq_restore(flags);
-+}
-+
-+static int
-+add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag)
-+{
-+	struct etrax_recv_buffer *buffer;
-+	if (info->uses_dma_in) {
-+		if (!(buffer = alloc_recv_buffer(4)))
-+			return 0;
-+
-+		buffer->length = 1;
-+		buffer->error = flag;
-+		buffer->buffer[0] = data;
-+
-+		append_recv_buffer(info, buffer);
-+
-+		info->icount.rx++;
-+	} else {
-+		struct tty_struct *tty = info->port.tty;
-+		tty_insert_flip_char(tty, data, flag);
-+		info->icount.rx++;
-+	}
-+
-+	return 1;
-+}
-+
-+static unsigned int handle_descr_data(struct e100_serial *info,
-+				      struct etrax_dma_descr *descr,
-+				      unsigned int recvl)
-+{
-+	struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
-+
-+	if (info->recv_cnt + recvl > 65536) {
-+		printk(KERN_CRIT
-+		       "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl);
-+		return 0;
-+	}
-+
-+	buffer->length = recvl;
-+
-+	if (info->errorcode == ERRCODE_SET_BREAK)
-+		buffer->error = TTY_BREAK;
-+	info->errorcode = 0;
-+
-+	append_recv_buffer(info, buffer);
-+
-+	if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
-+		panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
-+
-+	descr->buf = virt_to_phys(buffer->buffer);
-+
-+	return recvl;
-+}
-+
-+static unsigned int handle_all_descr_data(struct e100_serial *info)
-+{
-+	struct etrax_dma_descr *descr;
-+	unsigned int recvl;
-+	unsigned int ret = 0;
-+
-+	while (1)
-+	{
-+		descr = &info->rec_descr[info->cur_rec_descr];
-+
-+		if (descr == phys_to_virt(*info->idescradr))
-+			break;
-+
-+		if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS)
-+			info->cur_rec_descr = 0;
-+
-+		/* find out how many bytes were read */
-+
-+		/* if the eop bit was not set, all data has been received */
-+		if (!(descr->status & d_eop)) {
-+			recvl = descr->sw_len;
-+		} else {
-+			/* otherwise we find the amount of data received here */
-+			recvl = descr->hw_len;
-+		}
-+
-+		/* Reset the status information */
-+		descr->status = 0;
-+
-+		DFLOW(  DEBUG_LOG(info->line, "RX %lu\n", recvl);
-+			if (info->port.tty->stopped) {
-+				unsigned char *buf = phys_to_virt(descr->buf);
-+				DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]);
-+				DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]);
-+				DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]);
-+			}
-+			);
-+
-+		/* update stats */
-+		info->icount.rx += recvl;
-+
-+		ret += handle_descr_data(info, descr, recvl);
-+	}
-+
-+	return ret;
-+}
-+
-+static void receive_chars_dma(struct e100_serial *info)
-+{
-+	struct tty_struct *tty;
-+	unsigned char rstat;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+	/* No receive in the simulator.  Will probably be when the rest of
-+	 * the serial interface works, and this piece will just be removed.
-+	 */
-+	return;
-+#endif
-+
-+	/* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
-+	*info->iclrintradr =
-+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+
-+	tty = info->port.tty;
-+	if (!tty) /* Something wrong... */
-+		return;
-+
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+	if (info->uses_dma_in)
-+		e100_enable_serial_data_irq(info);
-+#endif
-+
-+	if (info->errorcode == ERRCODE_INSERT_BREAK)
-+		add_char_and_flag(info, '\0', TTY_BREAK);
-+
-+	handle_all_descr_data(info);
-+
-+	/* Read the status register to detect errors */
-+	rstat = info->ioport[REG_STATUS];
-+	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
-+		DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat));
-+	}
-+
-+	if (rstat & SER_ERROR_MASK) {
-+		/* If we got an error, we must reset it by reading the
-+		 * data_in field
-+		 */
-+		unsigned char data = info->ioport[REG_DATA];
-+
-+		PROCSTAT(ser_stat[info->line].errors_cnt++);
-+		DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
-+			  ((rstat & SER_ERROR_MASK) << 8) | data);
-+
-+		if (rstat & SER_PAR_ERR_MASK)
-+			add_char_and_flag(info, data, TTY_PARITY);
-+		else if (rstat & SER_OVERRUN_MASK)
-+			add_char_and_flag(info, data, TTY_OVERRUN);
-+		else if (rstat & SER_FRAMING_ERR_MASK)
-+			add_char_and_flag(info, data, TTY_FRAME);
-+	}
-+
-+	START_FLUSH_FAST_TIMER(info, "receive_chars");
-+
-+	/* Restart the receiving DMA */
-+	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
-+}
-+
-+static int start_recv_dma(struct e100_serial *info)
-+{
-+	struct etrax_dma_descr *descr = info->rec_descr;
-+	struct etrax_recv_buffer *buffer;
-+        int i;
-+
-+	/* Set up the receiving descriptors */
-+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
-+		if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
-+			panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
-+
-+		descr[i].ctrl = d_int;
-+		descr[i].buf = virt_to_phys(buffer->buffer);
-+		descr[i].sw_len = SERIAL_DESCR_BUF_SIZE;
-+		descr[i].hw_len = 0;
-+		descr[i].status = 0;
-+		descr[i].next = virt_to_phys(&descr[i+1]);
-+	}
-+
-+	/* Link the last descriptor to the first */
-+	descr[i-1].next = virt_to_phys(&descr[0]);
-+
-+	/* Start with the first descriptor in the list */
-+	info->cur_rec_descr = 0;
-+
-+	/* Start the DMA */
-+	*info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]);
-+	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
-+
-+	/* Input DMA should be running now */
-+	return 1;
-+}
-+
-+static void
-+start_receive(struct e100_serial *info)
-+{
-+#ifdef CONFIG_SVINTO_SIM
-+	/* No receive in the simulator.  Will probably be when the rest of
-+	 * the serial interface works, and this piece will just be removed.
-+	 */
-+	return;
-+#endif
-+	if (info->uses_dma_in) {
-+		/* reset the input dma channel to be sure it works */
-+
-+		*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
-+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
-+
-+		start_recv_dma(info);
-+	}
-+}
-+
-+
-+/* the bits in the MASK2 register are laid out like this:
-+   DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR
-+   where I is the input channel and O is the output channel for the port.
-+   info->irq is the bit number for the DMAO_DESCR so to check the others we
-+   shift info->irq to the left.
-+*/
-+
-+/* dma output channel interrupt handler
-+   this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or
-+   DMA8(ser1) when they have finished a descriptor with the intr flag set.
-+*/
-+
-+static irqreturn_t
-+tr_interrupt(int irq, void *dev_id)
-+{
-+	struct e100_serial *info;
-+	unsigned long ireg;
-+	int i;
-+	int handled = 0;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+	/* No receive in the simulator.  Will probably be when the rest of
-+	 * the serial interface works, and this piece will just be removed.
-+	 */
-+	{
-+		const char *s = "What? tr_interrupt in simulator??\n";
-+		SIMCOUT(s,strlen(s));
-+	}
-+	return IRQ_HANDLED;
-+#endif
-+
-+	/* find out the line that caused this irq and get it from rs_table */
-+
-+	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
-+
-+	for (i = 0; i < NR_PORTS; i++) {
-+		info = rs_table + i;
-+		if (!info->enabled || !info->uses_dma_out)
-+			continue;
-+		/* check for dma_descr (don't need to check for dma_eop in output dma for serial */
-+		if (ireg & info->irq) {
-+			handled = 1;
-+			/* we can send a new dma bunch. make it so. */
-+			DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i));
-+			/* Read jiffies_usec first,
-+			 * we want this time to be as late as possible
-+			 */
-+ 			PROCSTAT(ser_stat[info->line].tx_dma_ints++);
-+			info->last_tx_active_usec = GET_JIFFIES_USEC();
-+			info->last_tx_active = jiffies;
-+			transmit_chars_dma(info);
-+		}
-+
-+		/* FIXME: here we should really check for a change in the
-+		   status lines and if so call status_handle(info) */
-+	}
-+	return IRQ_RETVAL(handled);
-+} /* tr_interrupt */
-+
-+/* dma input channel interrupt handler */
-+
-+static irqreturn_t
-+rec_interrupt(int irq, void *dev_id)
-+{
-+	struct e100_serial *info;
-+	unsigned long ireg;
-+	int i;
-+	int handled = 0;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+	/* No receive in the simulator.  Will probably be when the rest of
-+	 * the serial interface works, and this piece will just be removed.
-+	 */
-+	{
-+		const char *s = "What? rec_interrupt in simulator??\n";
-+		SIMCOUT(s,strlen(s));
-+	}
-+	return IRQ_HANDLED;
-+#endif
-+
-+	/* find out the line that caused this irq and get it from rs_table */
-+
-+	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
-+
-+	for (i = 0; i < NR_PORTS; i++) {
-+		info = rs_table + i;
-+		if (!info->enabled || !info->uses_dma_in)
-+			continue;
-+		/* check for both dma_eop and dma_descr for the input dma channel */
-+		if (ireg & ((info->irq << 2) | (info->irq << 3))) {
-+			handled = 1;
-+			/* we have received something */
-+			receive_chars_dma(info);
-+		}
-+
-+		/* FIXME: here we should really check for a change in the
-+		   status lines and if so call status_handle(info) */
-+	}
-+	return IRQ_RETVAL(handled);
-+} /* rec_interrupt */
-+
-+static int force_eop_if_needed(struct e100_serial *info)
-+{
-+	/* We check data_avail bit to determine if data has
-+	 * arrived since last time
-+	 */
-+	unsigned char rstat = info->ioport[REG_STATUS];
-+
-+	/* error or datavail? */
-+	if (rstat & SER_ERROR_MASK) {
-+		/* Some error has occurred. If there has been valid data, an
-+		 * EOP interrupt will be made automatically. If no data, the
-+		 * normal ser_interrupt should be enabled and handle it.
-+		 * So do nothing!
-+		 */
-+		DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n",
-+		          rstat | (info->line << 8));
-+		return 0;
-+	}
-+
-+	if (rstat & SER_DATA_AVAIL_MASK) {
-+		/* Ok data, no error, count it */
-+		TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n",
-+		          rstat | (info->line << 8)));
-+		/* Read data to clear status flags */
-+		(void)info->ioport[REG_DATA];
-+
-+		info->forced_eop = 0;
-+		START_FLUSH_FAST_TIMER(info, "magic");
-+		return 0;
-+	}
-+
-+	/* hit the timeout, force an EOP for the input
-+	 * dma channel if we haven't already
-+	 */
-+	if (!info->forced_eop) {
-+		info->forced_eop = 1;
-+		PROCSTAT(ser_stat[info->line].timeout_flush_cnt++);
-+		TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line));
-+		FORCE_EOP(info);
-+	}
-+
-+	return 1;
-+}
-+
-+static void flush_to_flip_buffer(struct e100_serial *info)
-+{
-+	struct tty_struct *tty;
-+	struct etrax_recv_buffer *buffer;
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	tty = info->port.tty;
-+
-+	if (!tty) {
-+		local_irq_restore(flags);
-+		return;
-+	}
-+
-+	while ((buffer = info->first_recv_buffer) != NULL) {
-+		unsigned int count = buffer->length;
-+
-+		tty_insert_flip_string(tty, buffer->buffer, count);
-+		info->recv_cnt -= count;
-+
-+		if (count == buffer->length) {
-+			info->first_recv_buffer = buffer->next;
-+			kfree(buffer);
-+		} else {
-+			buffer->length -= count;
-+			memmove(buffer->buffer, buffer->buffer + count, buffer->length);
-+			buffer->error = TTY_NORMAL;
-+		}
-+	}
-+
-+	if (!info->first_recv_buffer)
-+		info->last_recv_buffer = NULL;
-+
-+	local_irq_restore(flags);
-+
-+	/* This includes a check for low-latency */
-+	tty_flip_buffer_push(tty);
-+}
-+
-+static void check_flush_timeout(struct e100_serial *info)
-+{
-+	/* Flip what we've got (if we can) */
-+	flush_to_flip_buffer(info);
-+
-+	/* We might need to flip later, but not to fast
-+	 * since the system is busy processing input... */
-+	if (info->first_recv_buffer)
-+		START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000);
-+
-+	/* Force eop last, since data might have come while we're processing
-+	 * and if we started the slow timer above, we won't start a fast
-+	 * below.
-+	 */
-+	force_eop_if_needed(info);
-+}
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+static void flush_timeout_function(unsigned long data)
-+{
-+	struct e100_serial *info = (struct e100_serial *)data;
-+
-+	fast_timers[info->line].function = NULL;
-+	serial_fast_timer_expired++;
-+	TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line));
-+	TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired));
-+	check_flush_timeout(info);
-+}
-+
-+#else
-+
-+/* dma fifo/buffer timeout handler
-+   forces an end-of-packet for the dma input channel if no chars
-+   have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s.
-+*/
-+
-+static struct timer_list flush_timer;
-+
-+static void
-+timed_flush_handler(unsigned long ptr)
-+{
-+	struct e100_serial *info;
-+	int i;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+	return;
-+#endif
-+
-+	for (i = 0; i < NR_PORTS; i++) {
-+		info = rs_table + i;
-+		if (info->uses_dma_in)
-+			check_flush_timeout(info);
-+	}
-+
-+	/* restart flush timer */
-+	mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
-+}
-+#endif
-+
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+
-+/* If there is an error (ie break) when the DMA is running and
-+ * there are no bytes in the fifo the DMA is stopped and we get no
-+ * eop interrupt. Thus we have to monitor the first bytes on a DMA
-+ * transfer, and if it is without error we can turn the serial
-+ * interrupts off.
-+ */
-+
-+/*
-+BREAK handling on ETRAX 100:
-+ETRAX will generate interrupt although there is no stop bit between the
-+characters.
-+
-+Depending on how long the break sequence is, the end of the breaksequence
-+will look differently:
-+| indicates start/end of a character.
-+
-+B= Break character (0x00) with framing error.
-+E= Error byte with parity error received after B characters.
-+F= "Faked" valid byte received immediately after B characters.
-+V= Valid byte
-+
-+1.
-+    B          BL         ___________________________ V
-+.._|__________|__________|                           |valid data |
-+
-+Multiple frame errors with data == 0x00 (B),
-+the timing matches up "perfectly" so no extra ending char is detected.
-+The RXD pin is 1 in the last interrupt, in that case
-+we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really
-+know if another byte will come and this really is case 2. below
-+(e.g F=0xFF or 0xFE)
-+If RXD pin is 0 we can expect another character (see 2. below).
-+
-+
-+2.
-+
-+    B          B          E or F__________________..__ V
-+.._|__________|__________|______    |                 |valid data
-+                          "valid" or
-+                          parity error
-+
-+Multiple frame errors with data == 0x00 (B),
-+but the part of the break trigs is interpreted as a start bit (and possibly
-+some 0 bits followed by a number of 1 bits and a stop bit).
-+Depending on parity settings etc. this last character can be either
-+a fake "valid" char (F) or have a parity error (E).
-+
-+If the character is valid it will be put in the buffer,
-+we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt
-+will set the flags so the tty will handle it,
-+if it's an error byte it will not be put in the buffer
-+and we set info->errorcode = ERRCODE_INSERT_BREAK.
-+
-+To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp
-+of the last faulty char (B) and compares it with the current time:
-+If the time elapsed time is less then 2*char_time_usec we will assume
-+it's a faked F char and not a Valid char and set
-+info->errorcode = ERRCODE_SET_BREAK.
-+
-+Flaws in the above solution:
-+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+We use the timer to distinguish a F character from a V character,
-+if a V character is to close after the break we might make the wrong decision.
-+
-+TODO: The break will be delayed until an F or V character is received.
-+
-+*/
-+
-+static
-+struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
-+{
-+	unsigned long data_read;
-+	struct tty_struct *tty = info->port.tty;
-+
-+	if (!tty) {
-+		printk("!NO TTY!\n");
-+		return info;
-+	}
-+
-+	/* Read data and status at the same time */
-+	data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
-+more_data:
-+	if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) {
-+		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
-+	}
-+	DINTR2(DEBUG_LOG(info->line, "ser_rx   %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)));
-+
-+	if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) |
-+			  IO_MASK(R_SERIAL0_READ, par_err) |
-+			  IO_MASK(R_SERIAL0_READ, overrun) )) {
-+		/* An error */
-+		info->last_rx_active_usec = GET_JIFFIES_USEC();
-+		info->last_rx_active = jiffies;
-+		DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read));
-+		DLOG_INT_TRIG(
-+		if (!log_int_trig1_pos) {
-+			log_int_trig1_pos = log_int_pos;
-+			log_int(rdpc(), 0, 0);
-+		}
-+		);
-+
-+
-+		if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) &&
-+		     (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) {
-+			/* Most likely a break, but we get interrupts over and
-+			 * over again.
-+			 */
-+
-+			if (!info->break_detected_cnt) {
-+				DEBUG_LOG(info->line, "#BRK start\n", 0);
-+			}
-+			if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) {
-+				/* The RX pin is high now, so the break
-+				 * must be over, but....
-+				 * we can't really know if we will get another
-+				 * last byte ending the break or not.
-+				 * And we don't know if the byte (if any) will
-+				 * have an error or look valid.
-+				 */
-+				DEBUG_LOG(info->line, "# BL BRK\n", 0);
-+				info->errorcode = ERRCODE_INSERT_BREAK;
-+			}
-+			info->break_detected_cnt++;
-+		} else {
-+			/* The error does not look like a break, but could be
-+			 * the end of one
-+			 */
-+			if (info->break_detected_cnt) {
-+				DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
-+				info->errorcode = ERRCODE_INSERT_BREAK;
-+			} else {
-+				unsigned char data = IO_EXTRACT(R_SERIAL0_READ,
-+					data_in, data_read);
-+				char flag = TTY_NORMAL;
-+				if (info->errorcode == ERRCODE_INSERT_BREAK) {
-+					struct tty_struct *tty = info->port.tty;
-+					tty_insert_flip_char(tty, 0, flag);
-+					info->icount.rx++;
-+				}
-+
-+				if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) {
-+					info->icount.parity++;
-+					flag = TTY_PARITY;
-+				} else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) {
-+					info->icount.overrun++;
-+					flag = TTY_OVERRUN;
-+				} else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) {
-+					info->icount.frame++;
-+					flag = TTY_FRAME;
-+				}
-+				tty_insert_flip_char(tty, data, flag);
-+				info->errorcode = 0;
-+			}
-+			info->break_detected_cnt = 0;
-+		}
-+	} else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
-+		/* No error */
-+		DLOG_INT_TRIG(
-+		if (!log_int_trig1_pos) {
-+			if (log_int_pos >= log_int_size) {
-+				log_int_pos = 0;
-+			}
-+			log_int_trig0_pos = log_int_pos;
-+			log_int(rdpc(), 0, 0);
-+		}
-+		);
-+		tty_insert_flip_char(tty,
-+			IO_EXTRACT(R_SERIAL0_READ, data_in, data_read),
-+			TTY_NORMAL);
-+	} else {
-+		DEBUG_LOG(info->line, "ser_rx int but no data_avail  %08lX\n", data_read);
-+	}
-+
-+
-+	info->icount.rx++;
-+	data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
-+	if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
-+		DEBUG_LOG(info->line, "ser_rx   %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read));
-+		goto more_data;
-+	}
-+
-+	tty_flip_buffer_push(info->port.tty);
-+	return info;
-+}
-+
-+static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
-+{
-+	unsigned char rstat;
-+
-+#ifdef SERIAL_DEBUG_INTR
-+	printk("Interrupt from serport %d\n", i);
-+#endif
-+/*	DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */
-+	if (!info->uses_dma_in) {
-+		return handle_ser_rx_interrupt_no_dma(info);
-+	}
-+	/* DMA is used */
-+	rstat = info->ioport[REG_STATUS];
-+	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
-+		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
-+	}
-+
-+	if (rstat & SER_ERROR_MASK) {
-+		unsigned char data;
-+
-+		info->last_rx_active_usec = GET_JIFFIES_USEC();
-+		info->last_rx_active = jiffies;
-+		/* If we got an error, we must reset it by reading the
-+		 * data_in field
-+		 */
-+		data = info->ioport[REG_DATA];
-+		DINTR1(DEBUG_LOG(info->line, "ser_rx!  %c\n", data));
-+		DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat));
-+		if (!data && (rstat & SER_FRAMING_ERR_MASK)) {
-+			/* Most likely a break, but we get interrupts over and
-+			 * over again.
-+			 */
-+
-+			if (!info->break_detected_cnt) {
-+				DEBUG_LOG(info->line, "#BRK start\n", 0);
-+			}
-+			if (rstat & SER_RXD_MASK) {
-+				/* The RX pin is high now, so the break
-+				 * must be over, but....
-+				 * we can't really know if we will get another
-+				 * last byte ending the break or not.
-+				 * And we don't know if the byte (if any) will
-+				 * have an error or look valid.
-+				 */
-+				DEBUG_LOG(info->line, "# BL BRK\n", 0);
-+				info->errorcode = ERRCODE_INSERT_BREAK;
-+			}
-+			info->break_detected_cnt++;
-+		} else {
-+			/* The error does not look like a break, but could be
-+			 * the end of one
-+			 */
-+			if (info->break_detected_cnt) {
-+				DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
-+				info->errorcode = ERRCODE_INSERT_BREAK;
-+			} else {
-+				if (info->errorcode == ERRCODE_INSERT_BREAK) {
-+					info->icount.brk++;
-+					add_char_and_flag(info, '\0', TTY_BREAK);
-+				}
-+
-+				if (rstat & SER_PAR_ERR_MASK) {
-+					info->icount.parity++;
-+					add_char_and_flag(info, data, TTY_PARITY);
-+				} else if (rstat & SER_OVERRUN_MASK) {
-+					info->icount.overrun++;
-+					add_char_and_flag(info, data, TTY_OVERRUN);
-+				} else if (rstat & SER_FRAMING_ERR_MASK) {
-+					info->icount.frame++;
-+					add_char_and_flag(info, data, TTY_FRAME);
-+				}
-+
-+				info->errorcode = 0;
-+			}
-+			info->break_detected_cnt = 0;
-+			DEBUG_LOG(info->line, "#iERR s d %04X\n",
-+			          ((rstat & SER_ERROR_MASK) << 8) | data);
-+		}
-+		PROCSTAT(ser_stat[info->line].early_errors_cnt++);
-+	} else { /* It was a valid byte, now let the DMA do the rest */
-+		unsigned long curr_time_u = GET_JIFFIES_USEC();
-+		unsigned long curr_time = jiffies;
-+
-+		if (info->break_detected_cnt) {
-+			/* Detect if this character is a new valid char or the
-+			 * last char in a break sequence: If LSBits are 0 and
-+			 * MSBits are high AND the time is close to the
-+			 * previous interrupt we should discard it.
-+			 */
-+			long elapsed_usec =
-+			  (curr_time - info->last_rx_active) * (1000000/HZ) +
-+			  curr_time_u - info->last_rx_active_usec;
-+			if (elapsed_usec < 2*info->char_time_usec) {
-+				DEBUG_LOG(info->line, "FBRK %i\n", info->line);
-+				/* Report as BREAK (error) and let
-+				 * receive_chars_dma() handle it
-+				 */
-+				info->errorcode = ERRCODE_SET_BREAK;
-+			} else {
-+				DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line);
-+			}
-+			DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt);
-+		}
-+
-+#ifdef SERIAL_DEBUG_INTR
-+		printk("** OK, disabling ser_interrupts\n");
-+#endif
-+		e100_disable_serial_data_irq(info);
-+		DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line));
-+		info->break_detected_cnt = 0;
-+
-+		PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++);
-+	}
-+	/* Restarting the DMA never hurts */
-+	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
-+	START_FLUSH_FAST_TIMER(info, "ser_int");
-+	return info;
-+} /* handle_ser_rx_interrupt */
-+
-+static void handle_ser_tx_interrupt(struct e100_serial *info)
-+{
-+	unsigned long flags;
-+
-+	if (info->x_char) {
-+		unsigned char rstat;
-+		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
-+		local_irq_save(flags);
-+		rstat = info->ioport[REG_STATUS];
-+		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
-+
-+		info->ioport[REG_TR_DATA] = info->x_char;
-+		info->icount.tx++;
-+		info->x_char = 0;
-+		/* We must enable since it is disabled in ser_interrupt */
-+		e100_enable_serial_tx_ready_irq(info);
-+		local_irq_restore(flags);
-+		return;
-+	}
-+	if (info->uses_dma_out) {
-+		unsigned char rstat;
-+		int i;
-+		/* We only use normal tx interrupt when sending x_char */
-+		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
-+		local_irq_save(flags);
-+		rstat = info->ioport[REG_STATUS];
-+		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
-+		e100_disable_serial_tx_ready_irq(info);
-+		if (info->port.tty->stopped)
-+			rs_stop(info->port.tty);
-+		/* Enable the DMA channel and tell it to continue */
-+		e100_enable_txdma_channel(info);
-+		/* Wait 12 cycles before doing the DMA command */
-+		for(i = 6;  i > 0; i--)
-+			nop();
-+
-+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue);
-+		local_irq_restore(flags);
-+		return;
-+	}
-+	/* Normal char-by-char interrupt */
-+	if (info->xmit.head == info->xmit.tail
-+	    || info->port.tty->stopped
-+	    || info->port.tty->hw_stopped) {
-+		DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n",
-+				info->port.tty->stopped));
-+		e100_disable_serial_tx_ready_irq(info);
-+		info->tr_running = 0;
-+		return;
-+	}
-+	DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
-+	/* Send a byte, rs485 timing is critical so turn of ints */
-+	local_irq_save(flags);
-+	info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
-+	info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
-+	info->icount.tx++;
-+	if (info->xmit.head == info->xmit.tail) {
-+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-+		if (info->rs485.flags & SER_RS485_ENABLED) {
-+			/* Set a short timer to toggle RTS */
-+			start_one_shot_timer(&fast_timers_rs485[info->line],
-+			                     rs485_toggle_rts_timer_function,
-+			                     (unsigned long)info,
-+			                     info->char_time_usec*2,
-+			                     "RS-485");
-+		}
-+#endif /* RS485 */
-+		info->last_tx_active_usec = GET_JIFFIES_USEC();
-+		info->last_tx_active = jiffies;
-+		e100_disable_serial_tx_ready_irq(info);
-+		info->tr_running = 0;
-+		DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0));
-+	} else {
-+		/* We must enable since it is disabled in ser_interrupt */
-+		e100_enable_serial_tx_ready_irq(info);
-+	}
-+	local_irq_restore(flags);
-+
-+	if (CIRC_CNT(info->xmit.head,
-+		     info->xmit.tail,
-+		     SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
-+		rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-+
-+} /* handle_ser_tx_interrupt */
-+
-+/* result of time measurements:
-+ * RX duration 54-60 us when doing something, otherwise 6-9 us
-+ * ser_int duration: just sending: 8-15 us normally, up to 73 us
-+ */
-+static irqreturn_t
-+ser_interrupt(int irq, void *dev_id)
-+{
-+	static volatile int tx_started = 0;
-+	struct e100_serial *info;
-+	int i;
-+	unsigned long flags;
-+	unsigned long irq_mask1_rd;
-+	unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */
-+	int handled = 0;
-+	static volatile unsigned long reentered_ready_mask = 0;
-+
-+	local_irq_save(flags);
-+	irq_mask1_rd = *R_IRQ_MASK1_RD;
-+	/* First handle all rx interrupts with ints disabled */
-+	info = rs_table;
-+	irq_mask1_rd &= e100_ser_int_mask;
-+	for (i = 0; i < NR_PORTS; i++) {
-+		/* Which line caused the data irq? */
-+		if (irq_mask1_rd & data_mask) {
-+			handled = 1;
-+			handle_ser_rx_interrupt(info);
-+		}
-+		info += 1;
-+		data_mask <<= 2;
-+	}
-+	/* Handle tx interrupts with interrupts enabled so we
-+	 * can take care of new data interrupts while transmitting
-+	 * We protect the tx part with the tx_started flag.
-+	 * We disable the tr_ready interrupts we are about to handle and
-+	 * unblock the serial interrupt so new serial interrupts may come.
-+	 *
-+	 * If we get a new interrupt:
-+	 *  - it migth be due to synchronous serial ports.
-+	 *  - serial irq will be blocked by general irq handler.
-+	 *  - async data will be handled above (sync will be ignored).
-+	 *  - tx_started flag will prevent us from trying to send again and
-+	 *    we will exit fast - no need to unblock serial irq.
-+	 *  - Next (sync) serial interrupt handler will be runned with
-+	 *    disabled interrupt due to restore_flags() at end of function,
-+	 *    so sync handler will not be preempted or reentered.
-+	 */
-+	if (!tx_started) {
-+		unsigned long ready_mask;
-+		unsigned long
-+		tx_started = 1;
-+		/* Only the tr_ready interrupts left */
-+		irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
-+				 IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
-+				 IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
-+				 IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
-+		while (irq_mask1_rd) {
-+			/* Disable those we are about to handle */
-+			*R_IRQ_MASK1_CLR = irq_mask1_rd;
-+			/* Unblock the serial interrupt */
-+			*R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
-+
-+			local_irq_enable();
-+			ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */
-+			info = rs_table;
-+			for (i = 0; i < NR_PORTS; i++) {
-+				/* Which line caused the ready irq? */
-+				if (irq_mask1_rd & ready_mask) {
-+					handled = 1;
-+					handle_ser_tx_interrupt(info);
-+				}
-+				info += 1;
-+				ready_mask <<= 2;
-+			}
-+			/* handle_ser_tx_interrupt enables tr_ready interrupts */
-+			local_irq_disable();
-+			/* Handle reentered TX interrupt */
-+			irq_mask1_rd = reentered_ready_mask;
-+		}
-+		local_irq_disable();
-+		tx_started = 0;
-+	} else {
-+		unsigned long ready_mask;
-+		ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
-+					     IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
-+					     IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
-+					     IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
-+		if (ready_mask) {
-+			reentered_ready_mask |= ready_mask;
-+			/* Disable those we are about to handle */
-+			*R_IRQ_MASK1_CLR = ready_mask;
-+			DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask));
-+		}
-+	}
-+
-+	local_irq_restore(flags);
-+	return IRQ_RETVAL(handled);
-+} /* ser_interrupt */
-+#endif
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * Here ends the serial interrupt routines.
-+ * -------------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine is used to handle the "bottom half" processing for the
-+ * serial driver, known also the "software interrupt" processing.
-+ * This processing is done at the kernel interrupt level, after the
-+ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON.  This
-+ * is where time-consuming activities which can not be done in the
-+ * interrupt driver proper are done; the interrupt driver schedules
-+ * them using rs_sched_event(), and they get done here.
-+ */
-+static void
-+do_softint(struct work_struct *work)
-+{
-+	struct e100_serial	*info;
-+	struct tty_struct	*tty;
-+
-+	info = container_of(work, struct e100_serial, work);
-+
-+	tty = info->port.tty;
-+	if (!tty)
-+		return;
-+
-+	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-+		tty_wakeup(tty);
-+}
-+
-+static int
-+startup(struct e100_serial * info)
-+{
-+	unsigned long flags;
-+	unsigned long xmit_page;
-+	int i;
-+
-+	xmit_page = get_zeroed_page(GFP_KERNEL);
-+	if (!xmit_page)
-+		return -ENOMEM;
-+
-+	local_irq_save(flags);
-+
-+	/* if it was already initialized, skip this */
-+
-+	if (info->flags & ASYNC_INITIALIZED) {
-+		local_irq_restore(flags);
-+		free_page(xmit_page);
-+		return 0;
-+	}
-+
-+	if (info->xmit.buf)
-+		free_page(xmit_page);
-+	else
-+		info->xmit.buf = (unsigned char *) xmit_page;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+	printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf);
-+#endif
-+
-+#ifdef CONFIG_SVINTO_SIM
-+	/* Bits and pieces collected from below.  Better to have them
-+	   in one ifdef:ed clause than to mix in a lot of ifdefs,
-+	   right? */
-+	if (info->port.tty)
-+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-+
-+	info->xmit.head = info->xmit.tail = 0;
-+	info->first_recv_buffer = info->last_recv_buffer = NULL;
-+	info->recv_cnt = info->max_recv_cnt = 0;
-+
-+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-+		info->rec_descr[i].buf = NULL;
-+
-+	/* No real action in the simulator, but may set info important
-+	   to ioctl. */
-+	change_speed(info);
-+#else
-+
-+	/*
-+	 * Clear the FIFO buffers and disable them
-+	 * (they will be reenabled in change_speed())
-+	 */
-+
-+	/*
-+	 * Reset the DMA channels and make sure their interrupts are cleared
-+	 */
-+
-+	if (info->dma_in_enabled) {
-+		info->uses_dma_in = 1;
-+		e100_enable_rxdma_channel(info);
-+
-+		*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+
-+		/* Wait until reset cycle is complete */
-+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
-+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
-+
-+		/* Make sure the irqs are cleared */
-+		*info->iclrintradr =
-+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+	} else {
-+		e100_disable_rxdma_channel(info);
-+	}
-+
-+	if (info->dma_out_enabled) {
-+		info->uses_dma_out = 1;
-+		e100_enable_txdma_channel(info);
-+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+
-+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) ==
-+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
-+
-+		/* Make sure the irqs are cleared */
-+		*info->oclrintradr =
-+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+	} else {
-+		e100_disable_txdma_channel(info);
-+	}
-+
-+	if (info->port.tty)
-+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-+
-+	info->xmit.head = info->xmit.tail = 0;
-+	info->first_recv_buffer = info->last_recv_buffer = NULL;
-+	info->recv_cnt = info->max_recv_cnt = 0;
-+
-+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-+		info->rec_descr[i].buf = 0;
-+
-+	/*
-+	 * and set the speed and other flags of the serial port
-+	 * this will start the rx/tx as well
-+	 */
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+	e100_enable_serial_data_irq(info);
-+#endif
-+	change_speed(info);
-+
-+	/* dummy read to reset any serial errors */
-+
-+	(void)info->ioport[REG_DATA];
-+
-+	/* enable the interrupts */
-+	if (info->uses_dma_out)
-+		e100_enable_txdma_irq(info);
-+
-+	e100_enable_rx_irq(info);
-+
-+	info->tr_running = 0; /* to be sure we don't lock up the transmitter */
-+
-+	/* setup the dma input descriptor and start dma */
-+
-+	start_receive(info);
-+
-+	/* for safety, make sure the descriptors last result is 0 bytes written */
-+
-+	info->tr_descr.sw_len = 0;
-+	info->tr_descr.hw_len = 0;
-+	info->tr_descr.status = 0;
-+
-+	/* enable RTS/DTR last */
-+
-+	e100_rts(info, 1);
-+	e100_dtr(info, 1);
-+
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+	info->flags |= ASYNC_INITIALIZED;
-+
-+	local_irq_restore(flags);
-+	return 0;
-+}
-+
-+/*
-+ * This routine will shutdown a serial port; interrupts are disabled, and
-+ * DTR is dropped if the hangup on close termio flag is on.
-+ */
-+static void
-+shutdown(struct e100_serial * info)
-+{
-+	unsigned long flags;
-+	struct etrax_dma_descr *descr = info->rec_descr;
-+	struct etrax_recv_buffer *buffer;
-+	int i;
-+
-+#ifndef CONFIG_SVINTO_SIM
-+	/* shut down the transmitter and receiver */
-+	DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
-+	e100_disable_rx(info);
-+	info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
-+
-+	/* disable interrupts, reset dma channels */
-+	if (info->uses_dma_in) {
-+		e100_disable_rxdma_irq(info);
-+		*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+		info->uses_dma_in = 0;
-+	} else {
-+		e100_disable_serial_data_irq(info);
-+	}
-+
-+	if (info->uses_dma_out) {
-+		e100_disable_txdma_irq(info);
-+		info->tr_running = 0;
-+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+		info->uses_dma_out = 0;
-+	} else {
-+		e100_disable_serial_tx_ready_irq(info);
-+		info->tr_running = 0;
-+	}
-+
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+	if (!(info->flags & ASYNC_INITIALIZED))
-+		return;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+	printk("Shutting down serial port %d (irq %d)....\n", info->line,
-+	       info->irq);
-+#endif
-+
-+	local_irq_save(flags);
-+
-+	if (info->xmit.buf) {
-+		free_page((unsigned long)info->xmit.buf);
-+		info->xmit.buf = NULL;
-+	}
-+
-+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-+		if (descr[i].buf) {
-+			buffer = phys_to_virt(descr[i].buf) - sizeof *buffer;
-+			kfree(buffer);
-+			descr[i].buf = 0;
-+		}
-+
-+	if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
-+		/* hang up DTR and RTS if HUPCL is enabled */
-+		e100_dtr(info, 0);
-+		e100_rts(info, 0); /* could check CRTSCTS before doing this */
-+	}
-+
-+	if (info->port.tty)
-+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-+
-+	info->flags &= ~ASYNC_INITIALIZED;
-+	local_irq_restore(flags);
-+}
-+
-+
-+/* change baud rate and other assorted parameters */
-+
-+static void
-+change_speed(struct e100_serial *info)
-+{
-+	unsigned int cflag;
-+	unsigned long xoff;
-+	unsigned long flags;
-+	/* first some safety checks */
-+
-+	if (!info->port.tty || !info->port.tty->termios)
-+		return;
-+	if (!info->ioport)
-+		return;
-+
-+	cflag = info->port.tty->termios->c_cflag;
-+
-+	/* possibly, the tx/rx should be disabled first to do this safely */
-+
-+	/* change baud-rate and write it to the hardware */
-+	if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
-+		/* Special baudrate */
-+		u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
-+		unsigned long alt_source =
-+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
-+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
-+		/* R_ALT_SER_BAUDRATE selects the source */
-+		DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n",
-+		       (unsigned long)info->baud_base, info->custom_divisor));
-+		if (info->baud_base == SERIAL_PRESCALE_BASE) {
-+			/* 0, 2-65535 (0=65536) */
-+			u16 divisor = info->custom_divisor;
-+			/* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */
-+			/* baudrate is 3.125MHz/custom_divisor */
-+			alt_source =
-+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) |
-+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale);
-+			alt_source = 0x11;
-+			DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor));
-+			*R_SERIAL_PRESCALE = divisor;
-+			info->baud = SERIAL_PRESCALE_BASE/divisor;
-+		}
-+#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED
-+		else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 &&
-+			  info->custom_divisor == 1) ||
-+			 (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ &&
-+			  info->custom_divisor == 8)) {
-+				/* ext_clk selected */
-+				alt_source =
-+					IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) |
-+					IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern);
-+				DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8));
-+				info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8;
-+			}
-+#endif
-+		else
-+		{
-+			/* Bad baudbase, we don't support using timer0
-+			 * for baudrate.
-+			 */
-+			printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n",
-+			       (unsigned long)info->baud_base, info->custom_divisor);
-+		}
-+		r_alt_ser_baudrate_shadow &= ~mask;
-+		r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
-+		*R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
-+	} else {
-+		/* Normal baudrate */
-+		/* Make sure we use normal baudrate */
-+		u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
-+		unsigned long alt_source =
-+			IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
-+			IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
-+		r_alt_ser_baudrate_shadow &= ~mask;
-+		r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
-+#ifndef CONFIG_SVINTO_SIM
-+		*R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+		info->baud = cflag_to_baud(cflag);
-+#ifndef CONFIG_SVINTO_SIM
-+		info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
-+#endif /* CONFIG_SVINTO_SIM */
-+	}
-+
-+#ifndef CONFIG_SVINTO_SIM
-+	/* start with default settings and then fill in changes */
-+	local_irq_save(flags);
-+	/* 8 bit, no/even parity */
-+	info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) |
-+			   IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) |
-+			   IO_MASK(R_SERIAL0_REC_CTRL, rec_par));
-+
-+	/* 8 bit, no/even parity, 1 stop bit, no cts */
-+	info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) |
-+			   IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) |
-+			   IO_MASK(R_SERIAL0_TR_CTRL, tr_par) |
-+			   IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) |
-+			   IO_MASK(R_SERIAL0_TR_CTRL, auto_cts));
-+
-+	if ((cflag & CSIZE) == CS7) {
-+		/* set 7 bit mode */
-+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
-+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
-+	}
-+
-+	if (cflag & CSTOPB) {
-+		/* set 2 stop bit mode */
-+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits);
-+	}
-+
-+	if (cflag & PARENB) {
-+		/* enable parity */
-+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
-+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
-+	}
-+
-+	if (cflag & CMSPAR) {
-+		/* enable stick parity, PARODD mean Mark which matches ETRAX */
-+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick);
-+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick);
-+	}
-+	if (cflag & PARODD) {
-+		/* set odd parity (or Mark if CMSPAR) */
-+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd);
-+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd);
-+	}
-+
-+	if (cflag & CRTSCTS) {
-+		/* enable automatic CTS handling */
-+		DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0));
-+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active);
-+	}
-+
-+	/* make sure the tx and rx are enabled */
-+
-+	info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable);
-+	info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
-+
-+	/* actually write the control regs to the hardware */
-+
-+	info->ioport[REG_TR_CTRL] = info->tx_ctrl;
-+	info->ioport[REG_REC_CTRL] = info->rx_ctrl;
-+	xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
-+	xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-+	if (info->port.tty->termios->c_iflag & IXON ) {
-+		DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n",
-+				STOP_CHAR(info->port.tty)));
-+		xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
-+	}
-+
-+	*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
-+	local_irq_restore(flags);
-+#endif /* !CONFIG_SVINTO_SIM */
-+
-+	update_char_time(info);
-+
-+} /* change_speed */
-+
-+/* start transmitting chars NOW */
-+
-+static void
-+rs_flush_chars(struct tty_struct *tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned long flags;
-+
-+	if (info->tr_running ||
-+	    info->xmit.head == info->xmit.tail ||
-+	    tty->stopped ||
-+	    tty->hw_stopped ||
-+	    !info->xmit.buf)
-+		return;
-+
-+#ifdef SERIAL_DEBUG_FLOW
-+	printk("rs_flush_chars\n");
-+#endif
-+
-+	/* this protection might not exactly be necessary here */
-+
-+	local_irq_save(flags);
-+	start_transmit(info);
-+	local_irq_restore(flags);
-+}
-+
-+static int rs_raw_write(struct tty_struct *tty,
-+			const unsigned char *buf, int count)
-+{
-+	int	c, ret = 0;
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned long flags;
-+
-+	/* first some sanity checks */
-+
-+	if (!tty || !info->xmit.buf || !tmp_buf)
-+		return 0;
-+
-+#ifdef SERIAL_DEBUG_DATA
-+	if (info->line == SERIAL_DEBUG_LINE)
-+		printk("rs_raw_write (%d), status %d\n",
-+		       count, info->ioport[REG_STATUS]);
-+#endif
-+
-+#ifdef CONFIG_SVINTO_SIM
-+	/* Really simple.  The output is here and now. */
-+	SIMCOUT(buf, count);
-+	return count;
-+#endif
-+	local_save_flags(flags);
-+	DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
-+	DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
-+
-+
-+	/* The local_irq_disable/restore_flags pairs below are needed
-+	 * because the DMA interrupt handler moves the info->xmit values.
-+	 * the memcpy needs to be in the critical region unfortunately,
-+	 * because we need to read xmit values, memcpy, write xmit values
-+	 * in one atomic operation... this could perhaps be avoided by
-+	 * more clever design.
-+	 */
-+	local_irq_disable();
-+		while (count) {
-+			c = CIRC_SPACE_TO_END(info->xmit.head,
-+					      info->xmit.tail,
-+					      SERIAL_XMIT_SIZE);
-+
-+			if (count < c)
-+				c = count;
-+			if (c <= 0)
-+				break;
-+
-+			memcpy(info->xmit.buf + info->xmit.head, buf, c);
-+			info->xmit.head = (info->xmit.head + c) &
-+				(SERIAL_XMIT_SIZE-1);
-+			buf += c;
-+			count -= c;
-+			ret += c;
-+		}
-+	local_irq_restore(flags);
-+
-+	/* enable transmitter if not running, unless the tty is stopped
-+	 * this does not need IRQ protection since if tr_running == 0
-+	 * the IRQ's are not running anyway for this port.
-+	 */
-+	DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret));
-+
-+	if (info->xmit.head != info->xmit.tail &&
-+	    !tty->stopped &&
-+	    !tty->hw_stopped &&
-+	    !info->tr_running) {
-+		start_transmit(info);
-+	}
-+
-+	return ret;
-+} /* raw_raw_write() */
-+
-+static int
-+rs_write(struct tty_struct *tty,
-+	 const unsigned char *buf, int count)
-+{
-+#if defined(CONFIG_ETRAX_RS485)
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+	if (info->rs485.flags & SER_RS485_ENABLED)
-+	{
-+		/* If we are in RS-485 mode, we need to toggle RTS and disable
-+		 * the receiver before initiating a DMA transfer
-+		 */
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+		/* Abort any started timer */
-+		fast_timers_rs485[info->line].function = NULL;
-+		del_fast_timer(&fast_timers_rs485[info->line]);
-+#endif
-+		e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND));
-+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
-+		e100_disable_rx(info);
-+		e100_enable_rx_irq(info);
-+#endif
-+
-+		if (info->rs485.delay_rts_before_send > 0)
-+			msleep(info->rs485.delay_rts_before_send);
-+	}
-+#endif /* CONFIG_ETRAX_RS485 */
-+
-+	count = rs_raw_write(tty, buf, count);
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+	if (info->rs485.flags & SER_RS485_ENABLED)
-+	{
-+		unsigned int val;
-+		/* If we are in RS-485 mode the following has to be done:
-+		 * wait until DMA is ready
-+		 * wait on transmit shift register
-+		 * toggle RTS
-+		 * enable the receiver
-+		 */
-+
-+		/* Sleep until all sent */
-+		tty_wait_until_sent(tty, 0);
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+		/* Now sleep a little more so that shift register is empty */
-+		schedule_usleep(info->char_time_usec * 2);
-+#endif
-+		/* wait on transmit shift register */
-+		do{
-+			get_lsr_info(info, &val);
-+		}while (!(val & TIOCSER_TEMT));
-+
-+		e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
-+
-+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
-+		e100_enable_rx(info);
-+		e100_enable_rxdma_irq(info);
-+#endif
-+	}
-+#endif /* CONFIG_ETRAX_RS485 */
-+
-+	return count;
-+} /* rs_write */
-+
-+
-+/* how much space is available in the xmit buffer? */
-+
-+static int
-+rs_write_room(struct tty_struct *tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+}
-+
-+/* How many chars are in the xmit buffer?
-+ * This does not include any chars in the transmitter FIFO.
-+ * Use wait_until_sent for waiting for FIFO drain.
-+ */
-+
-+static int
-+rs_chars_in_buffer(struct tty_struct *tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+}
-+
-+/* discard everything in the xmit buffer */
-+
-+static void
-+rs_flush_buffer(struct tty_struct *tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	info->xmit.head = info->xmit.tail = 0;
-+	local_irq_restore(flags);
-+
-+	tty_wakeup(tty);
-+}
-+
-+/*
-+ * This function is used to send a high-priority XON/XOFF character to
-+ * the device
-+ *
-+ * Since we use DMA we don't check for info->x_char in transmit_chars_dma(),
-+ * but we do it in handle_ser_tx_interrupt().
-+ * We disable DMA channel and enable tx ready interrupt and write the
-+ * character when possible.
-+ */
-+static void rs_send_xchar(struct tty_struct *tty, char ch)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned long flags;
-+	local_irq_save(flags);
-+	if (info->uses_dma_out) {
-+		/* Put the DMA on hold and disable the channel */
-+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold);
-+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) !=
-+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold));
-+		e100_disable_txdma_channel(info);
-+	}
-+
-+	/* Must make sure transmitter is not stopped before we can transmit */
-+	if (tty->stopped)
-+		rs_start(tty);
-+
-+	/* Enable manual transmit interrupt and send from there */
-+	DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch));
-+	info->x_char = ch;
-+	e100_enable_serial_tx_ready_irq(info);
-+	local_irq_restore(flags);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_throttle()
-+ *
-+ * This routine is called by the upper-layer tty layer to signal that
-+ * incoming characters should be throttled.
-+ * ------------------------------------------------------------
-+ */
-+static void
-+rs_throttle(struct tty_struct * tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+#ifdef SERIAL_DEBUG_THROTTLE
-+	char	buf[64];
-+
-+	printk("throttle %s: %lu....\n", tty_name(tty, buf),
-+	       (unsigned long)tty->ldisc.chars_in_buffer(tty));
-+#endif
-+	DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
-+
-+	/* Do RTS before XOFF since XOFF might take some time */
-+	if (tty->termios->c_cflag & CRTSCTS) {
-+		/* Turn off RTS line */
-+		e100_rts(info, 0);
-+	}
-+	if (I_IXOFF(tty))
-+		rs_send_xchar(tty, STOP_CHAR(tty));
-+
-+}
-+
-+static void
-+rs_unthrottle(struct tty_struct * tty)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+#ifdef SERIAL_DEBUG_THROTTLE
-+	char	buf[64];
-+
-+	printk("unthrottle %s: %lu....\n", tty_name(tty, buf),
-+	       (unsigned long)tty->ldisc.chars_in_buffer(tty));
-+#endif
-+	DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
-+	DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
-+	/* Do RTS before XOFF since XOFF might take some time */
-+	if (tty->termios->c_cflag & CRTSCTS) {
-+		/* Assert RTS line  */
-+		e100_rts(info, 1);
-+	}
-+
-+	if (I_IXOFF(tty)) {
-+		if (info->x_char)
-+			info->x_char = 0;
-+		else
-+			rs_send_xchar(tty, START_CHAR(tty));
-+	}
-+
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_ioctl() and friends
-+ * ------------------------------------------------------------
-+ */
-+
-+static int
-+get_serial_info(struct e100_serial * info,
-+		struct serial_struct * retinfo)
-+{
-+	struct serial_struct tmp;
-+
-+	/* this is all probably wrong, there are a lot of fields
-+	 * here that we don't have in e100_serial and maybe we
-+	 * should set them to something else than 0.
-+	 */
-+
-+	if (!retinfo)
-+		return -EFAULT;
-+	memset(&tmp, 0, sizeof(tmp));
-+	tmp.type = info->type;
-+	tmp.line = info->line;
-+	tmp.port = (int)info->ioport;
-+	tmp.irq = info->irq;
-+	tmp.flags = info->flags;
-+	tmp.baud_base = info->baud_base;
-+	tmp.close_delay = info->close_delay;
-+	tmp.closing_wait = info->closing_wait;
-+	tmp.custom_divisor = info->custom_divisor;
-+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-+		return -EFAULT;
-+	return 0;
-+}
-+
-+static int
-+set_serial_info(struct e100_serial *info,
-+		struct serial_struct *new_info)
-+{
-+	struct serial_struct new_serial;
-+	struct e100_serial old_info;
-+	int retval = 0;
-+
-+	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
-+		return -EFAULT;
-+
-+	old_info = *info;
-+
-+	if (!capable(CAP_SYS_ADMIN)) {
-+		if ((new_serial.type != info->type) ||
-+		    (new_serial.close_delay != info->close_delay) ||
-+		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
-+		     (info->flags & ~ASYNC_USR_MASK)))
-+			return -EPERM;
-+		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-+			       (new_serial.flags & ASYNC_USR_MASK));
-+		goto check_and_exit;
-+	}
-+
-+	if (info->count > 1)
-+		return -EBUSY;
-+
-+	/*
-+	 * OK, past this point, all the error checking has been done.
-+	 * At this point, we start making changes.....
-+	 */
-+
-+	info->baud_base = new_serial.baud_base;
-+	info->flags = ((info->flags & ~ASYNC_FLAGS) |
-+		       (new_serial.flags & ASYNC_FLAGS));
-+	info->custom_divisor = new_serial.custom_divisor;
-+	info->type = new_serial.type;
-+	info->close_delay = new_serial.close_delay;
-+	info->closing_wait = new_serial.closing_wait;
-+	info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-+
-+ check_and_exit:
-+	if (info->flags & ASYNC_INITIALIZED) {
-+		change_speed(info);
-+	} else
-+		retval = startup(info);
-+	return retval;
-+}
-+
-+/*
-+ * get_lsr_info - get line status register info
-+ *
-+ * Purpose: Let user call ioctl() to get info when the UART physically
-+ * 	    is emptied.  On bus types like RS485, the transmitter must
-+ * 	    release the bus after transmitting. This must be done when
-+ * 	    the transmit shift register is empty, not be done when the
-+ * 	    transmit holding register is empty.  This functionality
-+ * 	    allows an RS485 driver to be written in user space.
-+ */
-+static int
-+get_lsr_info(struct e100_serial * info, unsigned int *value)
-+{
-+	unsigned int result = TIOCSER_TEMT;
-+#ifndef CONFIG_SVINTO_SIM
-+	unsigned long curr_time = jiffies;
-+	unsigned long curr_time_usec = GET_JIFFIES_USEC();
-+	unsigned long elapsed_usec =
-+		(curr_time - info->last_tx_active) * 1000000/HZ +
-+		curr_time_usec - info->last_tx_active_usec;
-+
-+	if (info->xmit.head != info->xmit.tail ||
-+	    elapsed_usec < 2*info->char_time_usec) {
-+		result = 0;
-+	}
-+#endif
-+
-+	if (copy_to_user(value, &result, sizeof(int)))
-+		return -EFAULT;
-+	return 0;
-+}
-+
-+#ifdef SERIAL_DEBUG_IO
-+struct state_str
-+{
-+	int state;
-+	const char *str;
-+};
-+
-+const struct state_str control_state_str[] = {
-+	{TIOCM_DTR, "DTR" },
-+	{TIOCM_RTS, "RTS"},
-+	{TIOCM_ST, "ST?" },
-+	{TIOCM_SR, "SR?" },
-+	{TIOCM_CTS, "CTS" },
-+	{TIOCM_CD, "CD" },
-+	{TIOCM_RI, "RI" },
-+	{TIOCM_DSR, "DSR" },
-+	{0, NULL }
-+};
-+
-+char *get_control_state_str(int MLines, char *s)
-+{
-+	int i = 0;
-+
-+	s[0]='\0';
-+	while (control_state_str[i].str != NULL) {
-+		if (MLines & control_state_str[i].state) {
-+			if (s[0] != '\0') {
-+				strcat(s, ", ");
-+			}
-+			strcat(s, control_state_str[i].str);
-+		}
-+		i++;
-+	}
-+	return s;
-+}
-+#endif
-+
-+static int
-+rs_break(struct tty_struct *tty, int break_state)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned long flags;
-+
-+	if (!info->ioport)
-+		return -EIO;
-+
-+	local_irq_save(flags);
-+	if (break_state == -1) {
-+		/* Go to manual mode and set the txd pin to 0 */
-+		/* Clear bit 7 (txd) and 6 (tr_enable) */
-+		info->tx_ctrl &= 0x3F;
-+	} else {
-+		/* Set bit 7 (txd) and 6 (tr_enable) */
-+		info->tx_ctrl |= (0x80 | 0x40);
-+	}
-+	info->ioport[REG_TR_CTRL] = info->tx_ctrl;
-+	local_irq_restore(flags);
-+	return 0;
-+}
-+
-+static int
-+rs_tiocmset(struct tty_struct *tty, struct file *file,
-+		unsigned int set, unsigned int clear)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	if (clear & TIOCM_RTS)
-+		e100_rts(info, 0);
-+	if (clear & TIOCM_DTR)
-+		e100_dtr(info, 0);
-+	/* Handle FEMALE behaviour */
-+	if (clear & TIOCM_RI)
-+		e100_ri_out(info, 0);
-+	if (clear & TIOCM_CD)
-+		e100_cd_out(info, 0);
-+
-+	if (set & TIOCM_RTS)
-+		e100_rts(info, 1);
-+	if (set & TIOCM_DTR)
-+		e100_dtr(info, 1);
-+	/* Handle FEMALE behaviour */
-+	if (set & TIOCM_RI)
-+		e100_ri_out(info, 1);
-+	if (set & TIOCM_CD)
-+		e100_cd_out(info, 1);
-+
-+	local_irq_restore(flags);
-+	return 0;
-+}
-+
-+static int
-+rs_tiocmget(struct tty_struct *tty, struct file *file)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned int result;
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	result =
-+		(!E100_RTS_GET(info) ? TIOCM_RTS : 0)
-+		| (!E100_DTR_GET(info) ? TIOCM_DTR : 0)
-+		| (!E100_RI_GET(info) ? TIOCM_RNG : 0)
-+		| (!E100_DSR_GET(info) ? TIOCM_DSR : 0)
-+		| (!E100_CD_GET(info) ? TIOCM_CAR : 0)
-+		| (!E100_CTS_GET(info) ? TIOCM_CTS : 0);
-+
-+	local_irq_restore(flags);
-+
-+#ifdef SERIAL_DEBUG_IO
-+	printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n",
-+		info->line, result, result);
-+	{
-+		char s[100];
-+
-+		get_control_state_str(result, s);
-+		printk(KERN_DEBUG "state: %s\n", s);
-+	}
-+#endif
-+	return result;
-+
-+}
-+
-+
-+static int
-+rs_ioctl(struct tty_struct *tty, struct file * file,
-+	 unsigned int cmd, unsigned long arg)
-+{
-+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+
-+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-+	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD)  &&
-+	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
-+		if (tty->flags & (1 << TTY_IO_ERROR))
-+			return -EIO;
-+	}
-+
-+	switch (cmd) {
-+	case TIOCGSERIAL:
-+		return get_serial_info(info,
-+				       (struct serial_struct *) arg);
-+	case TIOCSSERIAL:
-+		return set_serial_info(info,
-+				       (struct serial_struct *) arg);
-+	case TIOCSERGETLSR: /* Get line status register */
-+		return get_lsr_info(info, (unsigned int *) arg);
-+
-+	case TIOCSERGSTRUCT:
-+		if (copy_to_user((struct e100_serial *) arg,
-+				 info, sizeof(struct e100_serial)))
-+			return -EFAULT;
-+		return 0;
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+	case TIOCSERSETRS485:
-+	{
-+		/* In this ioctl we still use the old structure
-+		 * rs485_control for backward compatibility
-+		 * (if we use serial_rs485, then old user-level code
-+		 * wouldn't work anymore...).
-+		 * The use of this ioctl is deprecated: use TIOCSRS485
-+		 * instead.*/
-+		struct rs485_control rs485ctrl;
-+		struct serial_rs485 rs485data;
-+		printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n");
-+		if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,
-+				sizeof(rs485ctrl)))
-+			return -EFAULT;
-+
-+		rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
-+		rs485data.flags = 0;
-+		if (rs485ctrl.enabled)
-+			rs485data.flags |= SER_RS485_ENABLED;
-+		else
-+			rs485data.flags &= ~(SER_RS485_ENABLED);
-+
-+		if (rs485ctrl.rts_on_send)
-+			rs485data.flags |= SER_RS485_RTS_ON_SEND;
-+		else
-+			rs485data.flags &= ~(SER_RS485_RTS_ON_SEND);
-+
-+		if (rs485ctrl.rts_after_sent)
-+			rs485data.flags |= SER_RS485_RTS_AFTER_SEND;
-+		else
-+			rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND);
-+
-+		return e100_enable_rs485(tty, &rs485data);
-+	}
-+
-+	case TIOCSRS485:
-+	{
-+		/* This is the new version of TIOCSRS485, with new
-+		 * data structure serial_rs485 */
-+		struct serial_rs485 rs485data;
-+		if (copy_from_user(&rs485data, (struct rs485_control *)arg,
-+				sizeof(rs485data)))
-+			return -EFAULT;
-+
-+		return e100_enable_rs485(tty, &rs485data);
-+	}
-+
-+
-+	case TIOCSERWRRS485:
-+	{
-+		struct rs485_write rs485wr;
-+		if (copy_from_user(&rs485wr, (struct rs485_write *)arg,
-+				sizeof(rs485wr)))
-+			return -EFAULT;
-+
-+		return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size);
-+	}
-+#endif
-+
-+	default:
-+		return -ENOIOCTLCMD;
-+	}
-+	return 0;
-+}
-+
-+static void
-+rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-+{
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+	change_speed(info);
-+
-+	/* Handle turning off CRTSCTS */
-+	if ((old_termios->c_cflag & CRTSCTS) &&
-+	    !(tty->termios->c_cflag & CRTSCTS)) {
-+		tty->hw_stopped = 0;
-+		rs_start(tty);
-+	}
-+
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_close()
-+ *
-+ * This routine is called when the serial port gets closed.  First, we
-+ * wait for the last remaining data to be sent.  Then, we unlink its
-+ * S structure from the interrupt chain if necessary, and we free
-+ * that IRQ if nothing is left in the chain.
-+ * ------------------------------------------------------------
-+ */
-+static void
-+rs_close(struct tty_struct *tty, struct file * filp)
-+{
-+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+	unsigned long flags;
-+
-+	if (!info)
-+		return;
-+
-+	/* interrupts are disabled for this entire function */
-+
-+	local_irq_save(flags);
-+
-+	if (tty_hung_up_p(filp)) {
-+		local_irq_restore(flags);
-+		return;
-+	}
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+	printk("[%d] rs_close ttyS%d, count = %d\n", current->pid,
-+	       info->line, info->count);
-+#endif
-+	if ((tty->count == 1) && (info->count != 1)) {
-+		/*
-+		 * Uh, oh.  tty->count is 1, which means that the tty
-+		 * structure will be freed.  Info->count should always
-+		 * be one in these conditions.  If it's greater than
-+		 * one, we've got real problems, since it means the
-+		 * serial port won't be shutdown.
-+		 */
-+		printk(KERN_CRIT
-+		       "rs_close: bad serial port count; tty->count is 1, "
-+		       "info->count is %d\n", info->count);
-+		info->count = 1;
-+	}
-+	if (--info->count < 0) {
-+		printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n",
-+		       info->line, info->count);
-+		info->count = 0;
-+	}
-+	if (info->count) {
-+		local_irq_restore(flags);
-+		return;
-+	}
-+	info->flags |= ASYNC_CLOSING;
-+	/*
-+	 * Save the termios structure, since this port may have
-+	 * separate termios for callout and dialin.
-+	 */
-+	if (info->flags & ASYNC_NORMAL_ACTIVE)
-+		info->normal_termios = *tty->termios;
-+	/*
-+	 * Now we wait for the transmit buffer to clear; and we notify
-+	 * the line discipline to only process XON/XOFF characters.
-+	 */
-+	tty->closing = 1;
-+	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-+		tty_wait_until_sent(tty, info->closing_wait);
-+	/*
-+	 * At this point we stop accepting input.  To do this, we
-+	 * disable the serial receiver and the DMA receive interrupt.
-+	 */
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+	e100_disable_serial_data_irq(info);
-+#endif
-+
-+#ifndef CONFIG_SVINTO_SIM
-+	e100_disable_rx(info);
-+	e100_disable_rx_irq(info);
-+
-+	if (info->flags & ASYNC_INITIALIZED) {
-+		/*
-+		 * Before we drop DTR, make sure the UART transmitter
-+		 * has completely drained; this is especially
-+		 * important as we have a transmit FIFO!
-+		 */
-+		rs_wait_until_sent(tty, HZ);
-+	}
-+#endif
-+
-+	shutdown(info);
-+	rs_flush_buffer(tty);
-+	tty_ldisc_flush(tty);
-+	tty->closing = 0;
-+	info->event = 0;
-+	info->port.tty = NULL;
-+	if (info->blocked_open) {
-+		if (info->close_delay)
-+			schedule_timeout_interruptible(info->close_delay);
-+		wake_up_interruptible(&info->open_wait);
-+	}
-+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-+	wake_up_interruptible(&info->close_wait);
-+	local_irq_restore(flags);
-+
-+	/* port closed */
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+	if (info->rs485.flags & SER_RS485_ENABLED) {
-+		info->rs485.flags &= ~(SER_RS485_ENABLED);
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+		*R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+			       rs485_port_g_bit, 0);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_LTC1387)
-+		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+			       CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0);
-+		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+			       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0);
-+#endif
-+	}
-+#endif
-+
-+	/*
-+	 * Release any allocated DMA irq's.
-+	 */
-+	if (info->dma_in_enabled) {
-+		free_irq(info->dma_in_irq_nbr, info);
-+		cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
-+		info->uses_dma_in = 0;
-+#ifdef SERIAL_DEBUG_OPEN
-+		printk(KERN_DEBUG "DMA irq '%s' freed\n",
-+			info->dma_in_irq_description);
-+#endif
-+	}
-+	if (info->dma_out_enabled) {
-+		free_irq(info->dma_out_irq_nbr, info);
-+		cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
-+		info->uses_dma_out = 0;
-+#ifdef SERIAL_DEBUG_OPEN
-+		printk(KERN_DEBUG "DMA irq '%s' freed\n",
-+			info->dma_out_irq_description);
-+#endif
-+	}
-+}
-+
-+/*
-+ * rs_wait_until_sent() --- wait until the transmitter is empty
-+ */
-+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
-+{
-+	unsigned long orig_jiffies;
-+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+	unsigned long curr_time = jiffies;
-+	unsigned long curr_time_usec = GET_JIFFIES_USEC();
-+	long elapsed_usec =
-+		(curr_time - info->last_tx_active) * (1000000/HZ) +
-+		curr_time_usec - info->last_tx_active_usec;
-+
-+	/*
-+	 * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
-+	 * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
-+	 */
-+	lock_kernel();
-+	orig_jiffies = jiffies;
-+	while (info->xmit.head != info->xmit.tail || /* More in send queue */
-+	       (*info->ostatusadr & 0x007f) ||  /* more in FIFO */
-+	       (elapsed_usec < 2*info->char_time_usec)) {
-+		schedule_timeout_interruptible(1);
-+		if (signal_pending(current))
-+			break;
-+		if (timeout && time_after(jiffies, orig_jiffies + timeout))
-+			break;
-+		curr_time = jiffies;
-+		curr_time_usec = GET_JIFFIES_USEC();
-+		elapsed_usec =
-+			(curr_time - info->last_tx_active) * (1000000/HZ) +
-+			curr_time_usec - info->last_tx_active_usec;
-+	}
-+	set_current_state(TASK_RUNNING);
-+	unlock_kernel();
-+}
-+
-+/*
-+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
-+ */
-+void
-+rs_hangup(struct tty_struct *tty)
-+{
-+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+
-+	rs_flush_buffer(tty);
-+	shutdown(info);
-+	info->event = 0;
-+	info->count = 0;
-+	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-+	info->port.tty = NULL;
-+	wake_up_interruptible(&info->open_wait);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_open() and friends
-+ * ------------------------------------------------------------
-+ */
-+static int
-+block_til_ready(struct tty_struct *tty, struct file * filp,
-+		struct e100_serial *info)
-+{
-+	DECLARE_WAITQUEUE(wait, current);
-+	unsigned long	flags;
-+	int		retval;
-+	int		do_clocal = 0, extra_count = 0;
-+
-+	/*
-+	 * If the device is in the middle of being closed, then block
-+	 * until it's done, and then try again.
-+	 */
-+	if (tty_hung_up_p(filp) ||
-+	    (info->flags & ASYNC_CLOSING)) {
-+		wait_event_interruptible(info->close_wait,
-+			!(info->flags & ASYNC_CLOSING));
-+#ifdef SERIAL_DO_RESTART
-+		if (info->flags & ASYNC_HUP_NOTIFY)
-+			return -EAGAIN;
-+		else
-+			return -ERESTARTSYS;
-+#else
-+		return -EAGAIN;
-+#endif
-+	}
-+
-+	/*
-+	 * If non-blocking mode is set, or the port is not enabled,
-+	 * then make the check up front and then exit.
-+	 */
-+	if ((filp->f_flags & O_NONBLOCK) ||
-+	    (tty->flags & (1 << TTY_IO_ERROR))) {
-+		info->flags |= ASYNC_NORMAL_ACTIVE;
-+		return 0;
-+	}
-+
-+	if (tty->termios->c_cflag & CLOCAL) {
-+			do_clocal = 1;
-+	}
-+
-+	/*
-+	 * Block waiting for the carrier detect and the line to become
-+	 * free (i.e., not in use by the callout).  While we are in
-+	 * this loop, info->count is dropped by one, so that
-+	 * rs_close() knows when to free things.  We restore it upon
-+	 * exit, either normal or abnormal.
-+	 */
-+	retval = 0;
-+	add_wait_queue(&info->open_wait, &wait);
-+#ifdef SERIAL_DEBUG_OPEN
-+	printk("block_til_ready before block: ttyS%d, count = %d\n",
-+	       info->line, info->count);
-+#endif
-+	local_irq_save(flags);
-+	if (!tty_hung_up_p(filp)) {
-+		extra_count++;
-+		info->count--;
-+	}
-+	local_irq_restore(flags);
-+	info->blocked_open++;
-+	while (1) {
-+		local_irq_save(flags);
-+		/* assert RTS and DTR */
-+		e100_rts(info, 1);
-+		e100_dtr(info, 1);
-+		local_irq_restore(flags);
-+		set_current_state(TASK_INTERRUPTIBLE);
-+		if (tty_hung_up_p(filp) ||
-+		    !(info->flags & ASYNC_INITIALIZED)) {
-+#ifdef SERIAL_DO_RESTART
-+			if (info->flags & ASYNC_HUP_NOTIFY)
-+				retval = -EAGAIN;
-+			else
-+				retval = -ERESTARTSYS;
-+#else
-+			retval = -EAGAIN;
-+#endif
-+			break;
-+		}
-+		if (!(info->flags & ASYNC_CLOSING) && do_clocal)
-+			/* && (do_clocal || DCD_IS_ASSERTED) */
-+			break;
-+		if (signal_pending(current)) {
-+			retval = -ERESTARTSYS;
-+			break;
-+		}
-+#ifdef SERIAL_DEBUG_OPEN
-+		printk("block_til_ready blocking: ttyS%d, count = %d\n",
-+		       info->line, info->count);
-+#endif
-+		schedule();
-+	}
-+	set_current_state(TASK_RUNNING);
-+	remove_wait_queue(&info->open_wait, &wait);
-+	if (extra_count)
-+		info->count++;
-+	info->blocked_open--;
-+#ifdef SERIAL_DEBUG_OPEN
-+	printk("block_til_ready after blocking: ttyS%d, count = %d\n",
-+	       info->line, info->count);
-+#endif
-+	if (retval)
-+		return retval;
-+	info->flags |= ASYNC_NORMAL_ACTIVE;
-+	return 0;
-+}
-+
-+static void
-+deinit_port(struct e100_serial *info)
-+{
-+	if (info->dma_out_enabled) {
-+		cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
-+		free_irq(info->dma_out_irq_nbr, info);
-+	}
-+	if (info->dma_in_enabled) {
-+		cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
-+		free_irq(info->dma_in_irq_nbr, info);
-+	}
-+}
-+
-+/*
-+ * This routine is called whenever a serial port is opened.
-+ * It performs the serial-specific initialization for the tty structure.
-+ */
-+static int
-+rs_open(struct tty_struct *tty, struct file * filp)
-+{
-+	struct e100_serial	*info;
-+	int 			retval, line;
-+	unsigned long           page;
-+	int                     allocated_resources = 0;
-+
-+	/* find which port we want to open */
-+	line = tty->index;
-+
-+	if (line < 0 || line >= NR_PORTS)
-+		return -ENODEV;
-+
-+	/* find the corresponding e100_serial struct in the table */
-+	info = rs_table + line;
-+
-+	/* don't allow the opening of ports that are not enabled in the HW config */
-+	if (!info->enabled)
-+		return -ENODEV;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+        printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name,
-+ 	       info->count);
-+#endif
-+
-+	info->count++;
-+	tty->driver_data = info;
-+	info->port.tty = tty;
-+
-+	info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-+
-+	if (!tmp_buf) {
-+		page = get_zeroed_page(GFP_KERNEL);
-+		if (!page) {
-+			return -ENOMEM;
-+		}
-+		if (tmp_buf)
-+			free_page(page);
-+		else
-+			tmp_buf = (unsigned char *) page;
-+	}
-+
-+	/*
-+	 * If the port is in the middle of closing, bail out now
-+	 */
-+	if (tty_hung_up_p(filp) ||
-+	    (info->flags & ASYNC_CLOSING)) {
-+		wait_event_interruptible(info->close_wait,
-+			!(info->flags & ASYNC_CLOSING));
-+#ifdef SERIAL_DO_RESTART
-+		return ((info->flags & ASYNC_HUP_NOTIFY) ?
-+			-EAGAIN : -ERESTARTSYS);
-+#else
-+		return -EAGAIN;
-+#endif
-+	}
-+
-+	/*
-+	 * If DMA is enabled try to allocate the irq's.
-+	 */
-+	if (info->count == 1) {
-+		allocated_resources = 1;
-+		if (info->dma_in_enabled) {
-+			if (request_irq(info->dma_in_irq_nbr,
-+					rec_interrupt,
-+					info->dma_in_irq_flags,
-+					info->dma_in_irq_description,
-+					info)) {
-+				printk(KERN_WARNING "DMA irq '%s' busy; "
-+					"falling back to non-DMA mode\n",
-+					info->dma_in_irq_description);
-+				/* Make sure we never try to use DMA in */
-+				/* for the port again. */
-+				info->dma_in_enabled = 0;
-+			} else if (cris_request_dma(info->dma_in_nbr,
-+					info->dma_in_irq_description,
-+					DMA_VERBOSE_ON_ERROR,
-+					info->dma_owner)) {
-+				free_irq(info->dma_in_irq_nbr, info);
-+				printk(KERN_WARNING "DMA '%s' busy; "
-+					"falling back to non-DMA mode\n",
-+					info->dma_in_irq_description);
-+				/* Make sure we never try to use DMA in */
-+				/* for the port again. */
-+				info->dma_in_enabled = 0;
-+			}
-+#ifdef SERIAL_DEBUG_OPEN
-+			else
-+				printk(KERN_DEBUG "DMA irq '%s' allocated\n",
-+					info->dma_in_irq_description);
-+#endif
-+		}
-+		if (info->dma_out_enabled) {
-+			if (request_irq(info->dma_out_irq_nbr,
-+					       tr_interrupt,
-+					       info->dma_out_irq_flags,
-+					       info->dma_out_irq_description,
-+					       info)) {
-+				printk(KERN_WARNING "DMA irq '%s' busy; "
-+					"falling back to non-DMA mode\n",
-+					info->dma_out_irq_description);
-+				/* Make sure we never try to use DMA out */
-+				/* for the port again. */
-+				info->dma_out_enabled = 0;
-+			} else if (cris_request_dma(info->dma_out_nbr,
-+					     info->dma_out_irq_description,
-+					     DMA_VERBOSE_ON_ERROR,
-+					     info->dma_owner)) {
-+				free_irq(info->dma_out_irq_nbr, info);
-+				printk(KERN_WARNING "DMA '%s' busy; "
-+					"falling back to non-DMA mode\n",
-+					info->dma_out_irq_description);
-+				/* Make sure we never try to use DMA out */
-+				/* for the port again. */
-+				info->dma_out_enabled = 0;
-+			}
-+#ifdef SERIAL_DEBUG_OPEN
-+			else
-+				printk(KERN_DEBUG "DMA irq '%s' allocated\n",
-+					info->dma_out_irq_description);
-+#endif
-+		}
-+	}
-+
-+	/*
-+	 * Start up the serial port
-+	 */
-+
-+	retval = startup(info);
-+	if (retval) {
-+		if (allocated_resources)
-+			deinit_port(info);
-+
-+		/* FIXME Decrease count info->count here too? */
-+		return retval;
-+	}
-+
-+
-+	retval = block_til_ready(tty, filp, info);
-+	if (retval) {
-+#ifdef SERIAL_DEBUG_OPEN
-+		printk("rs_open returning after block_til_ready with %d\n",
-+		       retval);
-+#endif
-+		if (allocated_resources)
-+			deinit_port(info);
-+
-+		return retval;
-+	}
-+
-+	if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
-+		*tty->termios = info->normal_termios;
-+		change_speed(info);
-+	}
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+	printk("rs_open ttyS%d successful...\n", info->line);
-+#endif
-+	DLOG_INT_TRIG( log_int_pos = 0);
-+
-+	DFLIP(	if (info->line == SERIAL_DEBUG_LINE) {
-+			info->icount.rx = 0;
-+		} );
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * /proc fs routines....
-+ */
-+
-+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
-+{
-+	unsigned long tmp;
-+
-+	seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
-+		   info->line, (unsigned long)info->ioport, info->irq);
-+
-+	if (!info->ioport || (info->type == PORT_UNKNOWN)) {
-+		seq_printf(m, "\n");
-+		return;
-+	}
-+
-+	seq_printf(m, " baud:%d", info->baud);
-+	seq_printf(m, " tx:%lu rx:%lu",
-+		       (unsigned long)info->icount.tx,
-+		       (unsigned long)info->icount.rx);
-+	tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+	if (tmp)
-+		seq_printf(m, " tx_pend:%lu/%lu",
-+			   (unsigned long)tmp,
-+			   (unsigned long)SERIAL_XMIT_SIZE);
-+
-+	seq_printf(m, " rx_pend:%lu/%lu",
-+		   (unsigned long)info->recv_cnt,
-+		   (unsigned long)info->max_recv_cnt);
-+
-+#if 1
-+	if (info->port.tty) {
-+		if (info->port.tty->stopped)
-+			seq_printf(m, " stopped:%i",
-+				   (int)info->port.tty->stopped);
-+		if (info->port.tty->hw_stopped)
-+			seq_printf(m, " hw_stopped:%i",
-+				   (int)info->port.tty->hw_stopped);
-+	}
-+
-+	{
-+		unsigned char rstat = info->ioport[REG_STATUS];
-+		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
-+			seq_printf(m, " xoff_detect:1");
-+	}
-+
-+#endif
-+
-+	if (info->icount.frame)
-+		seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
-+
-+	if (info->icount.parity)
-+		seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
-+
-+	if (info->icount.brk)
-+		seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
-+
-+	if (info->icount.overrun)
-+		seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
-+
-+	/*
-+	 * Last thing is the RS-232 status lines
-+	 */
-+	if (!E100_RTS_GET(info))
-+		seq_puts(m, "|RTS");
-+	if (!E100_CTS_GET(info))
-+		seq_puts(m, "|CTS");
-+	if (!E100_DTR_GET(info))
-+		seq_puts(m, "|DTR");
-+	if (!E100_DSR_GET(info))
-+		seq_puts(m, "|DSR");
-+	if (!E100_CD_GET(info))
-+		seq_puts(m, "|CD");
-+	if (!E100_RI_GET(info))
-+		seq_puts(m, "|RI");
-+	seq_puts(m, "\n");
-+}
-+
-+
-+static int crisv10_proc_show(struct seq_file *m, void *v)
-+{
-+	int i;
-+
-+	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
-+
-+	for (i = 0; i < NR_PORTS; i++) {
-+		if (!rs_table[i].enabled)
-+			continue;
-+		seq_line_info(m, &rs_table[i]);
-+	}
-+#ifdef DEBUG_LOG_INCLUDED
-+	for (i = 0; i < debug_log_pos; i++) {
-+		seq_printf(m, "%-4i %lu.%lu ",
-+			 i, debug_log[i].time,
-+			 timer_data_to_ns(debug_log[i].timer_data));
-+		seq_printf(m, debug_log[i].string, debug_log[i].value);
-+	}
-+	seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
-+	debug_log_pos = 0;
-+#endif
-+	return 0;
-+}
-+
-+static int crisv10_proc_open(struct inode *inode, struct file *file)
-+{
-+	return single_open(file, crisv10_proc_show, NULL);
-+}
-+
-+static const struct file_operations crisv10_proc_fops = {
-+	.owner		= THIS_MODULE,
-+	.open		= crisv10_proc_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= single_release,
-+};
-+#endif
-+
-+
-+/* Finally, routines used to initialize the serial driver. */
-+
-+static void show_serial_version(void)
-+{
-+	printk(KERN_INFO
-+	       "ETRAX 100LX serial-driver %s, "
-+	       "(c) 2000-2004 Axis Communications AB\r\n",
-+	       &serial_version[11]); /* "$Revision: x.yy" */
-+}
-+
-+/* rs_init inits the driver at boot (using the module_init chain) */
-+
-+static const struct tty_operations rs_ops = {
-+	.open = rs_open,
-+	.close = rs_close,
-+	.write = rs_write,
-+	.flush_chars = rs_flush_chars,
-+	.write_room = rs_write_room,
-+	.chars_in_buffer = rs_chars_in_buffer,
-+	.flush_buffer = rs_flush_buffer,
-+	.ioctl = rs_ioctl,
-+	.throttle = rs_throttle,
-+        .unthrottle = rs_unthrottle,
-+	.set_termios = rs_set_termios,
-+	.stop = rs_stop,
-+	.start = rs_start,
-+	.hangup = rs_hangup,
-+	.break_ctl = rs_break,
-+	.send_xchar = rs_send_xchar,
-+	.wait_until_sent = rs_wait_until_sent,
-+	.tiocmget = rs_tiocmget,
-+	.tiocmset = rs_tiocmset,
-+#ifdef CONFIG_PROC_FS
-+	.proc_fops = &crisv10_proc_fops,
-+#endif
-+};
-+
-+static int __init rs_init(void)
-+{
-+	int i;
-+	struct e100_serial *info;
-+	struct tty_driver *driver = alloc_tty_driver(NR_PORTS);
-+
-+	if (!driver)
-+		return -ENOMEM;
-+
-+	show_serial_version();
-+
-+	/* Setup the timed flush handler system */
-+
-+#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER)
-+	setup_timer(&flush_timer, timed_flush_handler, 0);
-+	mod_timer(&flush_timer, jiffies + 5);
-+#endif
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+	if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
-+			rs485_pa_bit)) {
-+		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
-+			"RS485 pin\n");
-+		put_tty_driver(driver);
-+		return -EBUSY;
-+	}
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+	if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
-+			rs485_port_g_bit)) {
-+		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
-+			"RS485 pin\n");
-+		put_tty_driver(driver);
-+		return -EBUSY;
-+	}
-+#endif
-+#endif
-+
-+	/* Initialize the tty_driver structure */
-+
-+	driver->driver_name = "serial";
-+	driver->name = "ttyS";
-+	driver->major = TTY_MAJOR;
-+	driver->minor_start = 64;
-+	driver->type = TTY_DRIVER_TYPE_SERIAL;
-+	driver->subtype = SERIAL_TYPE_NORMAL;
-+	driver->init_termios = tty_std_termios;
-+	driver->init_termios.c_cflag =
-+		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
-+	driver->init_termios.c_ispeed = 115200;
-+	driver->init_termios.c_ospeed = 115200;
-+	driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-+
-+	tty_set_operations(driver, &rs_ops);
-+        serial_driver = driver;
-+	if (tty_register_driver(driver))
-+		panic("Couldn't register serial driver\n");
-+	/* do some initializing for the separate ports */
-+
-+	for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
-+		if (info->enabled) {
-+			if (cris_request_io_interface(info->io_if,
-+					info->io_if_description)) {
-+				printk(KERN_CRIT "ETRAX100LX async serial: "
-+					"Could not allocate IO pins for "
-+					"%s, port %d\n",
-+					info->io_if_description, i);
-+				info->enabled = 0;
-+			}
-+		}
-+		info->uses_dma_in = 0;
-+		info->uses_dma_out = 0;
-+		info->line = i;
-+		info->port.tty = NULL;
-+		info->type = PORT_ETRAX;
-+		info->tr_running = 0;
-+		info->forced_eop = 0;
-+		info->baud_base = DEF_BAUD_BASE;
-+		info->custom_divisor = 0;
-+		info->flags = 0;
-+		info->close_delay = 5*HZ/10;
-+		info->closing_wait = 30*HZ;
-+		info->x_char = 0;
-+		info->event = 0;
-+		info->count = 0;
-+		info->blocked_open = 0;
-+		info->normal_termios = driver->init_termios;
-+		init_waitqueue_head(&info->open_wait);
-+		init_waitqueue_head(&info->close_wait);
-+		info->xmit.buf = NULL;
-+		info->xmit.tail = info->xmit.head = 0;
-+		info->first_recv_buffer = info->last_recv_buffer = NULL;
-+		info->recv_cnt = info->max_recv_cnt = 0;
-+		info->last_tx_active_usec = 0;
-+		info->last_tx_active = 0;
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+		/* Set sane defaults */
-+		info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
-+		info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
-+		info->rs485.delay_rts_before_send = 0;
-+		info->rs485.flags &= ~(SER_RS485_ENABLED);
-+#endif
-+		INIT_WORK(&info->work, do_softint);
-+
-+		if (info->enabled) {
-+			printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
-+			       serial_driver->name, info->line, (unsigned int)info->ioport);
-+		}
-+	}
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+	memset(fast_timers, 0, sizeof(fast_timers));
-+#endif
-+#ifdef CONFIG_ETRAX_RS485
-+	memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485));
-+#endif
-+	fast_timer_init();
-+#endif
-+
-+#ifndef CONFIG_SVINTO_SIM
-+#ifndef CONFIG_ETRAX_KGDB
-+	/* Not needed in simulator.  May only complicate stuff. */
-+	/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
-+
-+	if (request_irq(SERIAL_IRQ_NBR, ser_interrupt,
-+			IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
-+		panic("%s: Failed to request irq8", __func__);
-+
-+#endif
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+	return 0;
-+}
-+
-+/* this makes sure that rs_init is called during kernel boot */
-+
-+module_init(rs_init);
-diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.32/drivers/usb/host/hc-cris-dbg.h
---- linux-2.6.32.orig/drivers/usb/host/hc-cris-dbg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/hc-cris-dbg.h	2010-01-10 13:41:59.276309474 +0100
+diff -Nur linux-2.6.34.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.34/drivers/usb/host/hc-cris-dbg.h
+--- linux-2.6.34.orig/drivers/usb/host/hc-cris-dbg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.34/drivers/usb/host/hc-cris-dbg.h	2010-05-25 19:41:51.632223123 +0200
 @@ -0,0 +1,146 @@
 +
 +/* macros for debug output */
@@ -6915,10 +591,10 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.32/drivers/
 +		};							\
 +		s;							\
 +	})
-diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c linux-2.6.32/drivers/usb/host/hc-crisv10.c
---- linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/hc-crisv10.c	2010-01-10 13:41:59.326309689 +0100
-@@ -0,0 +1,4801 @@
+diff -Nur linux-2.6.34.orig/drivers/usb/host/hc-crisv10.c linux-2.6.34/drivers/usb/host/hc-crisv10.c
+--- linux-2.6.34.orig/drivers/usb/host/hc-crisv10.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.34/drivers/usb/host/hc-crisv10.c	2010-05-25 19:48:39.180967618 +0200
+@@ -0,0 +1,4802 @@
 +/*
 + *
 + * ETRAX 100LX USB Host Controller Driver
@@ -6933,6 +609,7 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c linux-2.6.32/drivers/u
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/moduleparam.h>
++#include <linux/slab.h>
 +#include <linux/spinlock.h>
 +#include <linux/usb.h>
 +#include <linux/platform_device.h>
@@ -11720,9 +5397,9 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c linux-2.6.32/drivers/u
 +/* Module hooks */
 +module_init(module_hcd_init);
 +module_exit(module_hcd_exit);
-diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.h linux-2.6.32/drivers/usb/host/hc-crisv10.h
---- linux-2.6.32.orig/drivers/usb/host/hc-crisv10.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/hc-crisv10.h	2010-01-10 13:41:59.326309689 +0100
+diff -Nur linux-2.6.34.orig/drivers/usb/host/hc-crisv10.h linux-2.6.34/drivers/usb/host/hc-crisv10.h
+--- linux-2.6.34.orig/drivers/usb/host/hc-crisv10.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.34/drivers/usb/host/hc-crisv10.h	2010-05-25 19:41:51.695693244 +0200
 @@ -0,0 +1,331 @@
 +#ifndef __LINUX_ETRAX_USB_H
 +#define __LINUX_ETRAX_USB_H
@@ -12055,116 +5732,30 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.h linux-2.6.32/drivers/u
 +#define USB_SB_command__full__yes       1
 +
 +#endif
-diff -Nur linux-2.6.32.orig/drivers/usb/host/Makefile linux-2.6.32/drivers/usb/host/Makefile
---- linux-2.6.32.orig/drivers/usb/host/Makefile	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/Makefile	2010-01-10 13:41:59.326309689 +0100
-@@ -32,3 +32,4 @@
+diff -Nur linux-2.6.34.orig/drivers/usb/host/Makefile linux-2.6.34/drivers/usb/host/Makefile
+--- linux-2.6.34.orig/drivers/usb/host/Makefile	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/usb/host/Makefile	2010-05-25 19:42:41.304723153 +0200
+@@ -32,5 +32,6 @@
  obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
  obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
  obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 +obj-$(CONFIG_ETRAX_USB_HOST)	+= hc-crisv10.o
-diff -Nur linux-2.6.32.orig/drivers/usb/host/Makefile.orig linux-2.6.32/drivers/usb/host/Makefile.orig
---- linux-2.6.32.orig/drivers/usb/host/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/Makefile.orig	2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,34 @@
-+#
-+# Makefile for USB Host Controller Drivers
-+#
-+
-+ifeq ($(CONFIG_USB_DEBUG),y)
-+	EXTRA_CFLAGS		+= -DDEBUG
-+endif
-+
-+isp1760-objs := isp1760-hcd.o isp1760-if.o
-+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
-+	     fhci-tds.o fhci-sched.o
-+ifeq ($(CONFIG_FHCI_DEBUG),y)
-+fhci-objs += fhci-dbg.o
-+endif
-+xhci-objs := xhci-hcd.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
-+
-+obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
-+
-+obj-$(CONFIG_PCI)		+= pci-quirks.o
-+
-+obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
-+obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
-+obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
-+obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
-+obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-+obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
-+obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
-+obj-$(CONFIG_USB_XHCI_HCD)	+= xhci.o
-+obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
-+obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
-+obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
-+obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
-+obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
-+obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
-diff -Nur linux-2.6.32.orig/drivers/usb/Makefile linux-2.6.32/drivers/usb/Makefile
---- linux-2.6.32.orig/drivers/usb/Makefile	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/usb/Makefile	2010-01-10 13:41:59.326309689 +0100
+ obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
+ 
+diff -Nur linux-2.6.34.orig/drivers/usb/Makefile linux-2.6.34/drivers/usb/Makefile
+--- linux-2.6.34.orig/drivers/usb/Makefile	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/usb/Makefile	2010-05-25 19:43:05.884723032 +0200
 @@ -21,6 +21,7 @@
  obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
  obj-$(CONFIG_USB_HWA_HCD)	+= host/
  obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
 +obj-$(CONFIG_ETRAX_USB_HOST)	+= host/
+ obj-$(CONFIG_USB_IMX21_HCD)	+= host/
  
  obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
- 
-diff -Nur linux-2.6.32.orig/drivers/usb/Makefile.orig linux-2.6.32/drivers/usb/Makefile.orig
---- linux-2.6.32.orig/drivers/usb/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/Makefile.orig	2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,46 @@
-+#
-+# Makefile for the kernel USB device drivers.
-+#
-+
-+# Object files in subdirectories
-+
-+obj-$(CONFIG_USB)		+= core/
-+
-+obj-$(CONFIG_USB_MON)		+= mon/
-+
-+obj-$(CONFIG_PCI)		+= host/
-+obj-$(CONFIG_USB_EHCI_HCD)	+= host/
-+obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
-+obj-$(CONFIG_USB_OHCI_HCD)	+= host/
-+obj-$(CONFIG_USB_UHCI_HCD)	+= host/
-+obj-$(CONFIG_USB_FHCI_HCD)	+= host/
-+obj-$(CONFIG_USB_XHCI_HCD)	+= host/
-+obj-$(CONFIG_USB_SL811_HCD)	+= host/
-+obj-$(CONFIG_USB_ISP1362_HCD)	+= host/
-+obj-$(CONFIG_USB_U132_HCD)	+= host/
-+obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
-+obj-$(CONFIG_USB_HWA_HCD)	+= host/
-+obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
-+
-+obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
-+
-+obj-$(CONFIG_USB_WUSB)		+= wusbcore/
-+
-+obj-$(CONFIG_USB_ACM)		+= class/
-+obj-$(CONFIG_USB_PRINTER)	+= class/
-+obj-$(CONFIG_USB_WDM)		+= class/
-+obj-$(CONFIG_USB_TMC)		+= class/
-+
-+obj-$(CONFIG_USB_STORAGE)	+= storage/
-+obj-$(CONFIG_USB)		+= storage/
-+
-+obj-$(CONFIG_USB_MDC800)	+= image/
-+obj-$(CONFIG_USB_MICROTEK)	+= image/
-+
-+obj-$(CONFIG_USB_SERIAL)	+= serial/
-+
-+obj-$(CONFIG_USB)		+= misc/
-+obj-y				+= early/
-+
-+obj-$(CONFIG_USB_ATM)		+= atm/
-+obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
-diff -Nur linux-2.6.32.orig/lib/klist.c linux-2.6.32/lib/klist.c
---- linux-2.6.32.orig/lib/klist.c	2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/lib/klist.c	2010-01-10 13:41:59.326309689 +0100
+diff -Nur linux-2.6.34.orig/lib/klist.c linux-2.6.34/lib/klist.c
+--- linux-2.6.34.orig/lib/klist.c	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/lib/klist.c	2010-05-25 19:41:55.440969800 +0200
 @@ -60,7 +60,7 @@
  {
  	knode->n_klist = klist;