linux: forgot to move 4.4.x patch directory after bump

1 files changed, 0 insertions, 4094 deletions

diff --git a/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch b/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch
deleted file mode 100644
index cd098665e..000000000
--- a/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch
+++ /dev/null
@@ -1,4094 +0,0 @@
-diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
-index e6c523c..5737a5b 100644
---- a/arch/cris/arch-v32/drivers/Kconfig
-+++ b/arch/cris/arch-v32/drivers/Kconfig
-@@ -8,9 +8,18 @@ config ETRAX_ETHERNET
- 	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet
- 	  controller.
- 
-+config ETRAX_HAVE_PHY
-+        bool "PHY present"
-+	default y
-+        help
-+          Search and use the first PHY available on the MDIO bus. Fail
-+          if none is found. Say Y here if you are not in a switched
-+          environment (single port device).
-+
- config ETRAX_NO_PHY
- 	bool "PHY not present"
- 	depends on ETRAX_ETHERNET
-+	default n
- 	help
- 	  This option disables all MDIO communication with an ethernet
- 	  transceiver connected to the MII interface. This option shall
-@@ -18,6 +27,70 @@ config ETRAX_NO_PHY
- 	  switch. This option should normally be disabled. If enabled,
- 	  speed and duplex will be locked to 100 Mbit and full duplex.
- 
-+config ETRAX_PHY_FALLBACK
-+        bool "Fixed PHY fallback"
-+        depends on ETRAX_ETHERNET
-+	default n
-+        help
-+          If no PHY is found on the MDIO bus, fall back on a fixed
-+          100/Full fixed PHY. Say Y here if you need dynamic PHY
-+          presence detection (switch connection where some but not
-+          all ports have integrated PHYs), otherwise say N.
-+
-+config ETRAX_ETHERNET_IFACE0
-+        depends on ETRAX_ETHERNET
-+        bool "Enable network interface 0"
-+
-+config ETRAX_ETHERNET_IFACE1
-+        depends on (ETRAX_ETHERNET && ETRAXFS)
-+        bool "Enable network interface 1 (uses DMA6 and DMA7)"
-+
-+choice
-+        prompt "Eth0 led group"
-+        depends on ETRAX_ETHERNET_IFACE0
-+        default ETRAX_ETH0_USE_LEDGRP0
-+
-+config ETRAX_ETH0_USE_LEDGRP0
-+        bool "Use LED grp 0"
-+        depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-+        help
-+          Use LED grp 0 for eth0
-+
-+config ETRAX_ETH0_USE_LEDGRP1
-+        bool "Use LED grp 1"
-+        depends on ETRAX_NBR_LED_GRP_TWO
-+        help
-+          Use LED grp 1 for eth0
-+
-+config ETRAX_ETH0_USE_LEDGRPNULL
-+        bool "Use no LEDs for eth0"
-+        help
-+          Use no LEDs for eth0
-+endchoice
-+
-+choice
-+        prompt "Eth1 led group"
-+        depends on ETRAX_ETHERNET_IFACE1
-+        default ETRAX_ETH1_USE_LEDGRP1
-+
-+config ETRAX_ETH1_USE_LEDGRP0
-+        bool "Use LED grp 0"
-+        depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-+        help
-+          Use LED grp 0 for eth1
-+
-+config ETRAX_ETH1_USE_LEDGRP1
-+        bool "Use LED grp 1"
-+        depends on ETRAX_NBR_LED_GRP_TWO
-+        help
-+          Use LED grp 1 for eth1
-+
-+config ETRAX_ETH1_USE_LEDGRPNULL
-+        bool "Use no LEDs for eth1"
-+        help
-+          Use no LEDs for eth1
-+endchoice
-+
- config ETRAXFS_SERIAL
- 	bool "Serial-port support"
- 	depends on ETRAX_ARCH_V32
-diff --git a/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h
-index 90fe8a2..37bec9a 100644
---- a/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h
-+++ b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h
-@@ -2,69 +2,64 @@
- #define __eth_defs_h
- 
- /*
-- * This file is autogenerated from
-- *   file:           eth.r
-- *     id:           eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp
-- *     last modfied: Mon Jan  9 06:06:41 2006
-- *
-- *   by /n/asic/design/tools/rdesc/rdes2c eth.r
-- *      id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $
-- * Any changes here will be lost.
-- *
-- * -*- buffer-read-only: t -*-
-+ * Note: Previously this was autogenerated code from the hardware
-+ * implementation. However, to enable the same file to be used
-+ * for both ARTPEC-3 and ETRAX FS this file is now hand-edited.
-+ * Be careful.
-  */
-+
- /* Main access macros */
- #ifndef REG_RD
- #define REG_RD( scope, inst, reg ) \
--  REG_READ( reg_##scope##_##reg, \
--            (inst) + REG_RD_ADDR_##scope##_##reg )
-+	REG_READ( reg_##scope##_##reg, \
-+			(inst) + REG_RD_ADDR_##scope##_##reg )
- #endif
- 
- #ifndef REG_WR
- #define REG_WR( scope, inst, reg, val ) \
--  REG_WRITE( reg_##scope##_##reg, \
--             (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-+	REG_WRITE( reg_##scope##_##reg, \
-+			(inst) + REG_WR_ADDR_##scope##_##reg, (val) )
- #endif
- 
- #ifndef REG_RD_VECT
- #define REG_RD_VECT( scope, inst, reg, index ) \
--  REG_READ( reg_##scope##_##reg, \
--            (inst) + REG_RD_ADDR_##scope##_##reg + \
--	    (index) * STRIDE_##scope##_##reg )
-+	REG_READ( reg_##scope##_##reg, \
-+			(inst) + REG_RD_ADDR_##scope##_##reg + \
-+			(index) * STRIDE_##scope##_##reg )
- #endif
- 
- #ifndef REG_WR_VECT
- #define REG_WR_VECT( scope, inst, reg, index, val ) \
--  REG_WRITE( reg_##scope##_##reg, \
--             (inst) + REG_WR_ADDR_##scope##_##reg + \
--	     (index) * STRIDE_##scope##_##reg, (val) )
-+	REG_WRITE( reg_##scope##_##reg, \
-+			(inst) + REG_WR_ADDR_##scope##_##reg + \
-+			(index) * STRIDE_##scope##_##reg, (val) )
- #endif
- 
- #ifndef REG_RD_INT
- #define REG_RD_INT( scope, inst, reg ) \
--  REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg )
-+	REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg )
- #endif
- 
- #ifndef REG_WR_INT
- #define REG_WR_INT( scope, inst, reg, val ) \
--  REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-+	REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
- #endif
- 
- #ifndef REG_RD_INT_VECT
- #define REG_RD_INT_VECT( scope, inst, reg, index ) \
--  REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \
--	    (index) * STRIDE_##scope##_##reg )
-+	REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \
-+			(index) * STRIDE_##scope##_##reg )
- #endif
- 
- #ifndef REG_WR_INT_VECT
- #define REG_WR_INT_VECT( scope, inst, reg, index, val ) \
--  REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \
--	     (index) * STRIDE_##scope##_##reg, (val) )
-+	REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \
-+			(index) * STRIDE_##scope##_##reg, (val) )
- #endif
- 
- #ifndef REG_TYPE_CONV
- #define REG_TYPE_CONV( type, orgtype, val ) \
--  ( { union { orgtype o; type n; } r; r.o = val; r.n; } )
-+	( { union { orgtype o; type n; } r; r.o = val; r.n; } )
- #endif
- 
- #ifndef reg_page_size
-@@ -73,306 +68,332 @@
- 
- #ifndef REG_ADDR
- #define REG_ADDR( scope, inst, reg ) \
--  ( (inst) + REG_RD_ADDR_##scope##_##reg )
-+	( (inst) + REG_RD_ADDR_##scope##_##reg )
- #endif
- 
- #ifndef REG_ADDR_VECT
- #define REG_ADDR_VECT( scope, inst, reg, index ) \
--  ( (inst) + REG_RD_ADDR_##scope##_##reg + \
--    (index) * STRIDE_##scope##_##reg )
-+	( (inst) + REG_RD_ADDR_##scope##_##reg + \
-+	  (index) * STRIDE_##scope##_##reg )
- #endif
- 
- /* C-code for register scope eth */
- 
- /* Register rw_ma0_lo, scope eth, type rw */
- typedef struct {
--  unsigned int addr : 32;
-+	unsigned int addr : 32;
- } reg_eth_rw_ma0_lo;
- #define REG_RD_ADDR_eth_rw_ma0_lo 0
- #define REG_WR_ADDR_eth_rw_ma0_lo 0
- 
- /* Register rw_ma0_hi, scope eth, type rw */
- typedef struct {
--  unsigned int addr : 16;
--  unsigned int dummy1 : 16;
-+	unsigned int addr : 16;
-+	unsigned int dummy1 : 16;
- } reg_eth_rw_ma0_hi;
- #define REG_RD_ADDR_eth_rw_ma0_hi 4
- #define REG_WR_ADDR_eth_rw_ma0_hi 4
- 
- /* Register rw_ma1_lo, scope eth, type rw */
- typedef struct {
--  unsigned int addr : 32;
-+	unsigned int addr : 32;
- } reg_eth_rw_ma1_lo;
- #define REG_RD_ADDR_eth_rw_ma1_lo 8
- #define REG_WR_ADDR_eth_rw_ma1_lo 8
- 
- /* Register rw_ma1_hi, scope eth, type rw */
- typedef struct {
--  unsigned int addr : 16;
--  unsigned int dummy1 : 16;
-+	unsigned int addr : 16;
-+	unsigned int dummy1 : 16;
- } reg_eth_rw_ma1_hi;
- #define REG_RD_ADDR_eth_rw_ma1_hi 12
- #define REG_WR_ADDR_eth_rw_ma1_hi 12
- 
- /* Register rw_ga_lo, scope eth, type rw */
- typedef struct {
--  unsigned int tbl : 32;
-+	unsigned int table : 32;
- } reg_eth_rw_ga_lo;
- #define REG_RD_ADDR_eth_rw_ga_lo 16
- #define REG_WR_ADDR_eth_rw_ga_lo 16
- 
- /* Register rw_ga_hi, scope eth, type rw */
- typedef struct {
--  unsigned int tbl : 32;
-+	unsigned int table : 32;
- } reg_eth_rw_ga_hi;
- #define REG_RD_ADDR_eth_rw_ga_hi 20
- #define REG_WR_ADDR_eth_rw_ga_hi 20
- 
- /* Register rw_gen_ctrl, scope eth, type rw */
- typedef struct {
--  unsigned int en         : 1;
--  unsigned int phy        : 2;
--  unsigned int protocol   : 1;
--  unsigned int loopback   : 1;
--  unsigned int flow_ctrl  : 1;
--  unsigned int gtxclk_out : 1;
--  unsigned int phyrst_n   : 1;
--  unsigned int dummy1     : 24;
-+	unsigned int en         : 1;
-+	unsigned int phy        : 2;
-+	unsigned int protocol   : 1;
-+	unsigned int loopback   : 1;
-+	unsigned int flow_ctrl  : 1;
-+	unsigned int gtxclk_out : 1;
-+	unsigned int phyrst_n   : 1;
-+	unsigned int dummy1     : 24;
- } reg_eth_rw_gen_ctrl;
- #define REG_RD_ADDR_eth_rw_gen_ctrl 24
- #define REG_WR_ADDR_eth_rw_gen_ctrl 24
- 
- /* Register rw_rec_ctrl, scope eth, type rw */
- typedef struct {
--  unsigned int ma0        : 1;
--  unsigned int ma1        : 1;
--  unsigned int individual : 1;
--  unsigned int broadcast  : 1;
--  unsigned int undersize  : 1;
--  unsigned int oversize   : 1;
--  unsigned int bad_crc    : 1;
--  unsigned int duplex     : 1;
--  unsigned int max_size   : 16;
--  unsigned int dummy1     : 8;
-+	unsigned int ma0        : 1;
-+	unsigned int ma1        : 1;
-+	unsigned int individual : 1;
-+	unsigned int broadcast  : 1;
-+	unsigned int undersize  : 1;
-+	unsigned int oversize   : 1;
-+	unsigned int bad_crc    : 1;
-+	unsigned int duplex     : 1;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	unsigned int max_size   : 16;
-+	unsigned int dummy1     : 8;
-+#else
-+	unsigned int max_size   : 1;
-+	unsigned int dummy1     : 23;
-+#endif
- } reg_eth_rw_rec_ctrl;
- #define REG_RD_ADDR_eth_rw_rec_ctrl 28
- #define REG_WR_ADDR_eth_rw_rec_ctrl 28
- 
- /* Register rw_tr_ctrl, scope eth, type rw */
- typedef struct {
--  unsigned int crc         : 1;
--  unsigned int pad         : 1;
--  unsigned int retry       : 1;
--  unsigned int ignore_col  : 1;
--  unsigned int cancel      : 1;
--  unsigned int hsh_delay   : 1;
--  unsigned int ignore_crs  : 1;
--  unsigned int carrier_ext : 1;
--  unsigned int dummy1      : 24;
-+	unsigned int crc         : 1;
-+	unsigned int pad         : 1;
-+	unsigned int retry       : 1;
-+	unsigned int ignore_col  : 1;
-+	unsigned int cancel      : 1;
-+	unsigned int hsh_delay   : 1;
-+	unsigned int ignore_crs  : 1;
-+	unsigned int carrier_ext : 1;
-+	unsigned int dummy1      : 24;
- } reg_eth_rw_tr_ctrl;
- #define REG_RD_ADDR_eth_rw_tr_ctrl 32
- #define REG_WR_ADDR_eth_rw_tr_ctrl 32
- 
- /* Register rw_clr_err, scope eth, type rw */
- typedef struct {
--  unsigned int clr : 1;
--  unsigned int dummy1 : 31;
-+	unsigned int clr : 1;
-+	unsigned int dummy1 : 31;
- } reg_eth_rw_clr_err;
- #define REG_RD_ADDR_eth_rw_clr_err 36
- #define REG_WR_ADDR_eth_rw_clr_err 36
- 
- /* Register rw_mgm_ctrl, scope eth, type rw */
- typedef struct {
--  unsigned int mdio : 1;
--  unsigned int mdoe : 1;
--  unsigned int mdc  : 1;
--  unsigned int dummy1 : 29;
-+	unsigned int mdio : 1;
-+	unsigned int mdoe : 1;
-+	unsigned int mdc  : 1;
-+	unsigned int phyclk : 1;
-+	unsigned int txdata : 4;
-+	unsigned int txen   : 1;
-+	unsigned int dummy1 : 23;
- } reg_eth_rw_mgm_ctrl;
- #define REG_RD_ADDR_eth_rw_mgm_ctrl 40
- #define REG_WR_ADDR_eth_rw_mgm_ctrl 40
- 
- /* Register r_stat, scope eth, type r */
- typedef struct {
--  unsigned int mdio    : 1;
--  unsigned int exc_col : 1;
--  unsigned int urun    : 1;
--  unsigned int clk_125 : 1;
--  unsigned int dummy1  : 28;
-+	unsigned int mdio    : 1;
-+	unsigned int exc_col : 1;
-+	unsigned int urun    : 1;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	unsigned int clk_125 : 1;
-+#else
-+	unsigned int phyclk  : 1;
-+#endif
-+	unsigned int txdata  : 4;
-+	unsigned int txen    : 1;
-+	unsigned int col     : 1;
-+	unsigned int crs     : 1;
-+	unsigned int txclk   : 1;
-+	unsigned int rxdata  : 4;
-+	unsigned int rxer    : 1;
-+	unsigned int rxdv    : 1;
-+	unsigned int rxclk   : 1;
-+	unsigned int dummy1  : 13;
- } reg_eth_r_stat;
- #define REG_RD_ADDR_eth_r_stat 44
- 
- /* Register rs_rec_cnt, scope eth, type rs */
- typedef struct {
--  unsigned int crc_err    : 8;
--  unsigned int align_err  : 8;
--  unsigned int oversize   : 8;
--  unsigned int congestion : 8;
-+	unsigned int crc_err    : 8;
-+	unsigned int align_err  : 8;
-+	unsigned int oversize   : 8;
-+	unsigned int congestion : 8;
- } reg_eth_rs_rec_cnt;
- #define REG_RD_ADDR_eth_rs_rec_cnt 48
- 
- /* Register r_rec_cnt, scope eth, type r */
- typedef struct {
--  unsigned int crc_err    : 8;
--  unsigned int align_err  : 8;
--  unsigned int oversize   : 8;
--  unsigned int congestion : 8;
-+	unsigned int crc_err    : 8;
-+	unsigned int align_err  : 8;
-+	unsigned int oversize   : 8;
-+	unsigned int congestion : 8;
- } reg_eth_r_rec_cnt;
- #define REG_RD_ADDR_eth_r_rec_cnt 52
- 
- /* Register rs_tr_cnt, scope eth, type rs */
- typedef struct {
--  unsigned int single_col : 8;
--  unsigned int mult_col   : 8;
--  unsigned int late_col   : 8;
--  unsigned int deferred   : 8;
-+	unsigned int single_col : 8;
-+	unsigned int mult_col   : 8;
-+	unsigned int late_col   : 8;
-+	unsigned int deferred   : 8;
- } reg_eth_rs_tr_cnt;
- #define REG_RD_ADDR_eth_rs_tr_cnt 56
- 
- /* Register r_tr_cnt, scope eth, type r */
- typedef struct {
--  unsigned int single_col : 8;
--  unsigned int mult_col   : 8;
--  unsigned int late_col   : 8;
--  unsigned int deferred   : 8;
-+	unsigned int single_col : 8;
-+	unsigned int mult_col   : 8;
-+	unsigned int late_col   : 8;
-+	unsigned int deferred   : 8;
- } reg_eth_r_tr_cnt;
- #define REG_RD_ADDR_eth_r_tr_cnt 60
- 
- /* Register rs_phy_cnt, scope eth, type rs */
- typedef struct {
--  unsigned int carrier_loss : 8;
--  unsigned int sqe_err      : 8;
--  unsigned int dummy1       : 16;
-+	unsigned int carrier_loss : 8;
-+	unsigned int sqe_err      : 8;
-+	unsigned int dummy1       : 16;
- } reg_eth_rs_phy_cnt;
- #define REG_RD_ADDR_eth_rs_phy_cnt 64
- 
- /* Register r_phy_cnt, scope eth, type r */
- typedef struct {
--  unsigned int carrier_loss : 8;
--  unsigned int sqe_err      : 8;
--  unsigned int dummy1       : 16;
-+	unsigned int carrier_loss : 8;
-+	unsigned int sqe_err      : 8;
-+	unsigned int dummy1       : 16;
- } reg_eth_r_phy_cnt;
- #define REG_RD_ADDR_eth_r_phy_cnt 68
- 
- /* Register rw_test_ctrl, scope eth, type rw */
- typedef struct {
--  unsigned int snmp_inc : 1;
--  unsigned int snmp     : 1;
--  unsigned int backoff  : 1;
--  unsigned int dummy1   : 29;
-+	unsigned int snmp_inc : 1;
-+	unsigned int snmp     : 1;
-+	unsigned int backoff  : 1;
-+	unsigned int dummy1   : 29;
- } reg_eth_rw_test_ctrl;
- #define REG_RD_ADDR_eth_rw_test_ctrl 72
- #define REG_WR_ADDR_eth_rw_test_ctrl 72
- 
- /* Register rw_intr_mask, scope eth, type rw */
- typedef struct {
--  unsigned int crc          : 1;
--  unsigned int align        : 1;
--  unsigned int oversize     : 1;
--  unsigned int congestion   : 1;
--  unsigned int single_col   : 1;
--  unsigned int mult_col     : 1;
--  unsigned int late_col     : 1;
--  unsigned int deferred     : 1;
--  unsigned int carrier_loss : 1;
--  unsigned int sqe_test_err : 1;
--  unsigned int orun         : 1;
--  unsigned int urun         : 1;
--  unsigned int exc_col      : 1;
--  unsigned int mdio         : 1;
--  unsigned int dummy1       : 18;
-+	unsigned int crc          : 1;
-+	unsigned int align        : 1;
-+	unsigned int oversize     : 1;
-+	unsigned int congestion   : 1;
-+	unsigned int single_col   : 1;
-+	unsigned int mult_col     : 1;
-+	unsigned int late_col     : 1;
-+	unsigned int deferred     : 1;
-+	unsigned int carrier_loss : 1;
-+	unsigned int sqe_test_err : 1;
-+	unsigned int orun         : 1;
-+	unsigned int urun         : 1;
-+	unsigned int exc_col      : 1;
-+	unsigned int mdio         : 1;
-+	unsigned int dummy1       : 18;
- } reg_eth_rw_intr_mask;
- #define REG_RD_ADDR_eth_rw_intr_mask 76
- #define REG_WR_ADDR_eth_rw_intr_mask 76
- 
- /* Register rw_ack_intr, scope eth, type rw */
- typedef struct {
--  unsigned int crc          : 1;
--  unsigned int align        : 1;
--  unsigned int oversize     : 1;
--  unsigned int congestion   : 1;
--  unsigned int single_col   : 1;
--  unsigned int mult_col     : 1;
--  unsigned int late_col     : 1;
--  unsigned int deferred     : 1;
--  unsigned int carrier_loss : 1;
--  unsigned int sqe_test_err : 1;
--  unsigned int orun         : 1;
--  unsigned int urun         : 1;
--  unsigned int exc_col      : 1;
--  unsigned int mdio         : 1;
--  unsigned int dummy1       : 18;
-+	unsigned int crc          : 1;
-+	unsigned int align        : 1;
-+	unsigned int oversize     : 1;
-+	unsigned int congestion   : 1;
-+	unsigned int single_col   : 1;
-+	unsigned int mult_col     : 1;
-+	unsigned int late_col     : 1;
-+	unsigned int deferred     : 1;
-+	unsigned int carrier_loss : 1;
-+	unsigned int sqe_test_err : 1;
-+	unsigned int orun         : 1;
-+	unsigned int urun         : 1;
-+	unsigned int exc_col      : 1;
-+	unsigned int mdio         : 1;
-+	unsigned int dummy1       : 18;
- } reg_eth_rw_ack_intr;
- #define REG_RD_ADDR_eth_rw_ack_intr 80
- #define REG_WR_ADDR_eth_rw_ack_intr 80
- 
- /* Register r_intr, scope eth, type r */
- typedef struct {
--  unsigned int crc          : 1;
--  unsigned int align        : 1;
--  unsigned int oversize     : 1;
--  unsigned int congestion   : 1;
--  unsigned int single_col   : 1;
--  unsigned int mult_col     : 1;
--  unsigned int late_col     : 1;
--  unsigned int deferred     : 1;
--  unsigned int carrier_loss : 1;
--  unsigned int sqe_test_err : 1;
--  unsigned int orun         : 1;
--  unsigned int urun         : 1;
--  unsigned int exc_col      : 1;
--  unsigned int mdio         : 1;
--  unsigned int dummy1       : 18;
-+	unsigned int crc          : 1;
-+	unsigned int align        : 1;
-+	unsigned int oversize     : 1;
-+	unsigned int congestion   : 1;
-+	unsigned int single_col   : 1;
-+	unsigned int mult_col     : 1;
-+	unsigned int late_col     : 1;
-+	unsigned int deferred     : 1;
-+	unsigned int carrier_loss : 1;
-+	unsigned int sqe_test_err : 1;
-+	unsigned int orun         : 1;
-+	unsigned int urun         : 1;
-+	unsigned int exc_col      : 1;
-+	unsigned int mdio         : 1;
-+	unsigned int dummy1       : 18;
- } reg_eth_r_intr;
- #define REG_RD_ADDR_eth_r_intr 84
- 
- /* Register r_masked_intr, scope eth, type r */
- typedef struct {
--  unsigned int crc          : 1;
--  unsigned int align        : 1;
--  unsigned int oversize     : 1;
--  unsigned int congestion   : 1;
--  unsigned int single_col   : 1;
--  unsigned int mult_col     : 1;
--  unsigned int late_col     : 1;
--  unsigned int deferred     : 1;
--  unsigned int carrier_loss : 1;
--  unsigned int sqe_test_err : 1;
--  unsigned int orun         : 1;
--  unsigned int urun         : 1;
--  unsigned int exc_col      : 1;
--  unsigned int mdio         : 1;
--  unsigned int dummy1       : 18;
-+	unsigned int crc          : 1;
-+	unsigned int align        : 1;
-+	unsigned int oversize     : 1;
-+	unsigned int congestion   : 1;
-+	unsigned int single_col   : 1;
-+	unsigned int mult_col     : 1;
-+	unsigned int late_col     : 1;
-+	unsigned int deferred     : 1;
-+	unsigned int carrier_loss : 1;
-+	unsigned int sqe_test_err : 1;
-+	unsigned int orun         : 1;
-+	unsigned int urun         : 1;
-+	unsigned int exc_col      : 1;
-+	unsigned int mdio         : 1;
-+	unsigned int dummy1       : 18;
- } reg_eth_r_masked_intr;
- #define REG_RD_ADDR_eth_r_masked_intr 88
- 
--
- /* Constants */
- enum {
--  regk_eth_discard                         = 0x00000000,
--  regk_eth_ether                           = 0x00000000,
--  regk_eth_full                            = 0x00000001,
--  regk_eth_gmii                            = 0x00000003,
--  regk_eth_gtxclk                          = 0x00000001,
--  regk_eth_half                            = 0x00000000,
--  regk_eth_hsh                             = 0x00000001,
--  regk_eth_mii                             = 0x00000001,
--  regk_eth_mii_arec                        = 0x00000002,
--  regk_eth_mii_clk                         = 0x00000000,
--  regk_eth_no                              = 0x00000000,
--  regk_eth_phyrst                          = 0x00000000,
--  regk_eth_rec                             = 0x00000001,
--  regk_eth_rw_ga_hi_default                = 0x00000000,
--  regk_eth_rw_ga_lo_default                = 0x00000000,
--  regk_eth_rw_gen_ctrl_default             = 0x00000000,
--  regk_eth_rw_intr_mask_default            = 0x00000000,
--  regk_eth_rw_ma0_hi_default               = 0x00000000,
--  regk_eth_rw_ma0_lo_default               = 0x00000000,
--  regk_eth_rw_ma1_hi_default               = 0x00000000,
--  regk_eth_rw_ma1_lo_default               = 0x00000000,
--  regk_eth_rw_mgm_ctrl_default             = 0x00000000,
--  regk_eth_rw_test_ctrl_default            = 0x00000000,
--  regk_eth_size1518                        = 0x000005ee,
--  regk_eth_size1522                        = 0x000005f2,
--  regk_eth_yes                             = 0x00000001
-+	regk_eth_discard                         = 0x00000000,
-+	regk_eth_ether                           = 0x00000000,
-+	regk_eth_full                            = 0x00000001,
-+	regk_eth_gmii                            = 0x00000003,
-+	regk_eth_gtxclk                          = 0x00000001,
-+	regk_eth_half                            = 0x00000000,
-+	regk_eth_hsh                             = 0x00000001,
-+	regk_eth_mii                             = 0x00000001,
-+	regk_eth_mii_arec                        = 0x00000002,
-+	regk_eth_mii_clk                         = 0x00000000,
-+	regk_eth_no                              = 0x00000000,
-+	regk_eth_phyrst                          = 0x00000000,
-+	regk_eth_rec                             = 0x00000001,
-+	regk_eth_rw_ga_hi_default                = 0x00000000,
-+	regk_eth_rw_ga_lo_default                = 0x00000000,
-+	regk_eth_rw_gen_ctrl_default             = 0x00000000,
-+	regk_eth_rw_intr_mask_default            = 0x00000000,
-+	regk_eth_rw_ma0_hi_default               = 0x00000000,
-+	regk_eth_rw_ma0_lo_default               = 0x00000000,
-+	regk_eth_rw_ma1_hi_default               = 0x00000000,
-+	regk_eth_rw_ma1_lo_default               = 0x00000000,
-+	regk_eth_rw_mgm_ctrl_default             = 0x00000000,
-+	regk_eth_rw_test_ctrl_default            = 0x00000000,
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	regk_eth_size1518                        = 0x000005ee,
-+	regk_eth_size1522                        = 0x000005f2,
-+#else
-+	regk_eth_size1518                        = 0x00000000,
-+	regk_eth_size1522                        = 0x00000001,
-+#endif
-+	regk_eth_yes                             = 0x00000001
- };
-+
- #endif /* __eth_defs_h */
-diff --git a/drivers/net/cris/Makefile b/drivers/net/cris/Makefile
-index b4e8932..39b4d4d 100644
---- a/drivers/net/cris/Makefile
-+++ b/drivers/net/cris/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_ETRAX_ARCH_V10) += eth_v10.o
-+obj-$(CONFIG_ETRAX_ARCH_V32) += eth_v32.o
-diff --git a/drivers/net/cris/eth_v32.c b/drivers/net/cris/eth_v32.c
-new file mode 100644
-index 0000000..92c4cae
---- /dev/null
-+++ b/drivers/net/cris/eth_v32.c
-@@ -0,0 +1,3093 @@
-+/*
-+ * Driver for the ETRAX FS/Artpec-3 network controller.
-+ *
-+ * Copyright (c) 2003-2008 Axis Communications AB.
-+ *
-+ * TODO:
-+ *   *    Decrease the amount of code running with interrupts disabled.
-+ *   *    Rework the error handling so that we do not need to touch the tx
-+ *        ring from the error interrupts. When done, we should be able to
-+ *        do tx completition from the NAPI loop without disabling interrupts.
-+ *   *    Remove the gigabit code. It's probably never going to be used.
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+
-+#include <asm/io.h>		/* CRIS_LED_* I/O functions */
-+#include <asm/irq.h>
-+#include <hwregs/reg_map.h>
-+#include <hwregs/reg_rdwr.h>
-+#include <hwregs/dma.h>
-+#include <hwregs/eth_defs.h>
-+#ifdef CONFIG_ETRAXFS
-+#include <hwregs/config_defs.h>
-+#else
-+#include <hwregs/clkgen_defs.h>
-+#endif
-+#include <hwregs/intr_vect_defs.h>
-+#include <hwregs/strmux_defs.h>
-+#include <asm/bitops.h>
-+#include <asm/ethernet.h>
-+#include <mach/dma.h>
-+#include <pinmux.h>
-+
-+#include "eth_v32.h"
-+
-+#ifndef CONFIG_ETRAXFS
-+#define ETH0_INTR_VECT ETH_INTR_VECT
-+#define ETH1_INTR_VECT ETH_INTR_VECT
-+#define regi_eth0 regi_eth
-+#define regi_eth1 regi_
-+#endif
-+
-+#define DEBUG(x)
-+#define GET_BIT(bit,val)   (((val) >> (bit)) & 0x01)
-+
-+#if defined(CONFIG_ETRAX_HAVE_PHY) || defined(CONFIG_ETRAX_PHY_FALLBACK)
-+#define RESET_PHY 1
-+#else
-+#define RESET_PHY 0
-+#endif
-+
-+enum {
-+	HAVE_PHY,
-+	NO_PHY,
-+	FALLBACK_PHY,
-+};
-+#if defined(CONFIG_ETRAX_PHY_FALLBACK)
-+#define PHY_MODE (FALLBACK_PHY)
-+#elif defined(CONFIG_ETRAX_NO_PHY)
-+#define PHY_MODE (NO_PHY)
-+#elif defined(CONFIG_ETRAX_HAVE_PHY)
-+#define PHY_MODE (HAVE_PHY)
-+#else
-+#error Unknown PHY behaviour
-+#endif
-+
-+static struct {
-+	const char str[ETH_GSTRING_LEN];
-+} const ethtool_stats_keys[] = {
-+	{ "tx_dma_restarts" },
-+	{ "tx_mac_resets" },
-+	{ "rx_dma_restarts" },
-+	{ "rx_dma_timeouts" },
-+	{ "  dropped_rx" }
-+};
-+
-+static void crisv32_eth_check_speed(unsigned long idev);
-+static void crisv32_eth_check_duplex(unsigned long idev);
-+static void update_rx_stats(struct crisv32_ethernet_local *np);
-+static void update_tx_stats(struct crisv32_ethernet_local *np);
-+static int crisv32_eth_poll(struct napi_struct *napi, int budget);
-+static void crisv32_eth_setup_controller(struct net_device *dev);
-+static int crisv32_eth_request_irqdma(struct net_device *dev);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+static void
-+crisv32_eth_restart_rx_dma(struct net_device* dev,
-+			   struct crisv32_ethernet_local *np);
-+#endif
-+#if 0
-+static void crisv32_ethernet_bug(struct net_device *dev);
-+#endif
-+
-+/*
-+ * The name of the card. Is used for messages and in the requests for
-+ * io regions, irqs and dma channels.
-+ */
-+#ifdef CONFIG_ETRAXFS
-+static const char cardname[] = "ETRAX FS built-in ethernet controller";
-+#else
-+static const char cardname[] = "ARTPEC-3 built-in ethernet controller";
-+#endif
-+
-+/* Some chipset needs special care. */
-+#ifndef CONFIG_ETRAX_NO_PHY
-+struct transceiver_ops transceivers[] = {
-+	{0x1018, broadcom_check_speed, broadcom_check_duplex},
-+	{0x50EF, broadcom_check_speed, broadcom_check_duplex},
-+	/* TDK 2120 and TDK 2120C */
-+	{0xC039, tdk_check_speed, tdk_check_duplex},
-+	{0x039C, tdk_check_speed, tdk_check_duplex},
-+	/* Intel LXT972A*/
-+	{0x04de, intel_check_speed, intel_check_duplex},
-+	/* National Semiconductor DP83865 */
-+	{0x0017, national_check_speed, national_check_duplex},
-+	/* Vitesse VCS8641 */
-+	{0x01c1, vitesse_check_speed, vitesse_check_duplex},
-+	/* Davicom DM9161 */
-+	{0x606E, davicom_check_speed, davicom_check_duplex},
-+	/* Generic, must be last. */
-+	{0x0000, generic_check_speed, generic_check_duplex}
-+};
-+#endif
-+
-+static struct net_device *crisv32_dev[2];
-+static struct crisv32_eth_leds *crisv32_leds[3];
-+
-+/* Default MAC address for interface 0.
-+ * The real one will be set later. */
-+static struct sockaddr default_mac_iface0 =
-+  {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00}};
-+
-+#ifdef CONFIG_CPU_FREQ
-+static int
-+crisv32_ethernet_freq_notifier(struct notifier_block *nb, unsigned long val,
-+			       void *data);
-+
-+static struct notifier_block crisv32_ethernet_freq_notifier_block = {
-+	.notifier_call	= crisv32_ethernet_freq_notifier
-+};
-+#endif
-+
-+static void receive_timeout(unsigned long arg);
-+static void receive_timeout_work(struct work_struct* work);
-+static void transmit_timeout(unsigned long arg);
-+
-+/*
-+ * mask in and out tx/rx interrupts.
-+ */
-+static inline void crisv32_disable_tx_ints(struct crisv32_ethernet_local *np)
-+{
-+	reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_no };
-+	REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
-+}
-+
-+static inline void crisv32_enable_tx_ints(struct crisv32_ethernet_local *np)
-+{
-+	reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_yes };
-+	REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
-+}
-+
-+static inline void crisv32_disable_rx_ints(struct crisv32_ethernet_local *np)
-+{
-+	reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_no };
-+	REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
-+}
-+
-+static inline void crisv32_enable_rx_ints(struct crisv32_ethernet_local *np)
-+{
-+	reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_yes };
-+	REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
-+}
-+
-+static inline void crisv32_disable_eth_ints(struct crisv32_ethernet_local *np)
-+{
-+	int intr_mask_nw = 0x0;
-+	REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
-+}
-+
-+static inline void crisv32_enable_eth_ints(struct crisv32_ethernet_local *np)
-+{
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	/* For Artpec-3 we use overrun to workaround voodoo TR 87 */
-+	int intr_mask_nw = 0x1c00;
-+#else
-+	int intr_mask_nw = 0x1800;
-+#endif
-+	REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
-+}
-+
-+static inline int crisv32_eth_gigabit(struct crisv32_ethernet_local *np)
-+{
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	return np->gigabit_mode;
-+#else
-+	return 0;
-+#endif
-+}
-+
-+static inline void crisv32_eth_set_gigabit(struct crisv32_ethernet_local *np,
-+					   int g)
-+{
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	np->gigabit_mode = g;
-+#endif
-+}
-+
-+/* start/stop receiver */
-+static inline void crisv32_start_receiver(struct crisv32_ethernet_local *np)
-+{
-+	reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+	rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+	rec_ctrl.ma0 = regk_eth_yes;
-+	rec_ctrl.broadcast = regk_eth_rec;
-+	REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+static inline void crisv32_stop_receiver(struct crisv32_ethernet_local *np)
-+{
-+	reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+	rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+	rec_ctrl.ma0 = regk_eth_no;
-+	rec_ctrl.broadcast = regk_eth_discard;
-+	REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+static inline void crisv32_eth_reset(struct crisv32_ethernet_local *np)
-+{
-+	reg_eth_rw_gen_ctrl gen_ctrl = { 0 };
-+
-+	gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl);
-+	gen_ctrl.en = regk_eth_no;
-+	REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+	gen_ctrl.en = regk_eth_yes;
-+	REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+}
-+
-+static void crisv32_eth_tx_cancel_frame(struct crisv32_ethernet_local *np)
-+{
-+	reg_eth_rw_tr_ctrl tr_ctrl;
-+
-+	/* Cancel any pending transmits.  This should bring us to the
-+	   excessive collisions state but it doesn't always do it.  */
-+	tr_ctrl = REG_RD(eth, np->eth_inst, rw_tr_ctrl);
-+	tr_ctrl.cancel = 1;
-+	REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+	tr_ctrl.cancel = 0;
-+	REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+}
-+
-+/*
-+ * Hack to disconnect/reconnect the dma from the ethernet block while we reset
-+ * things. TODO: verify that we don't need to disconnect out channels and
-+ * remove that code.
-+ *
-+ * ARTPEC-3 has only a single ethernet block so np->eth_inst is always eth0.
-+ * The strmux values are named slightly different, redefine to avoid #ifdefs
-+ * in the code blocks. For artpec3 only regk_strmux_eth0 and channel 0/1
-+ * should be used.
-+ */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+#define regk_strmux_eth0 regk_strmux_eth
-+#define regk_strmux_eth1 regk_strmux_eth
-+#endif
-+static inline void
-+crisv32_disconnect_eth_tx_dma(struct crisv32_ethernet_local *np)
-+{
-+	reg_strmux_rw_cfg strmux_cfg;
-+
-+	strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+	if (np->eth_inst == regi_eth0)
-+		strmux_cfg.dma0 = regk_strmux_off;
-+	else
-+		strmux_cfg.dma6 = regk_strmux_off;
-+	REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static inline void crisv32_connect_eth_tx_dma(struct crisv32_ethernet_local *np)
-+{
-+	reg_strmux_rw_cfg strmux_cfg;
-+
-+	strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+	if (np->eth_inst == regi_eth0)
-+		strmux_cfg.dma0 = regk_strmux_eth0;
-+	else
-+		strmux_cfg.dma6 = regk_strmux_eth1;
-+	REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static inline void
-+crisv32_disconnect_eth_rx_dma(struct crisv32_ethernet_local *np)
-+{
-+	reg_strmux_rw_cfg strmux_cfg;
-+
-+	strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+	if (np->eth_inst == regi_eth0)
-+		strmux_cfg.dma1 = regk_strmux_off;
-+	else
-+		strmux_cfg.dma7 = regk_strmux_off;
-+	REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static inline void crisv32_connect_eth_rx_dma(struct crisv32_ethernet_local *np)
-+{
-+	reg_strmux_rw_cfg strmux_cfg;
-+
-+	strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+	if (np->eth_inst == regi_eth0)
-+		strmux_cfg.dma1 = regk_strmux_eth0;
-+	else
-+		strmux_cfg.dma7 = regk_strmux_eth1;
-+	REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static int dma_wait_busy(int inst, int timeout)
-+{
-+	reg_dma_rw_stream_cmd dma_sc;
-+
-+	do {
-+		dma_sc = REG_RD(dma, inst, rw_stream_cmd);
-+	} while (timeout-- > 0 && dma_sc.busy);
-+	return dma_sc.busy;
-+}
-+
-+static int __init crisv32_eth_request_irqdma(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	/* Allocate IRQs and DMAs. */
-+	if (np->eth_inst == regi_eth0) {
-+		if (request_irq(DMA0_INTR_VECT, crisv32tx_eth_interrupt,
-+				0, "Ethernet TX", dev)) {
-+			return -EAGAIN;
-+		}
-+
-+		if (request_irq(DMA1_INTR_VECT, crisv32rx_eth_interrupt,
-+				0, "Ethernet RX", dev))
-+			goto err0_1;
-+
-+		if (crisv32_request_dma(0, cardname, DMA_VERBOSE_ON_ERROR,
-+					12500000, dma_eth0))
-+			goto err0_2;
-+
-+		if (crisv32_request_dma(1, cardname, DMA_VERBOSE_ON_ERROR,
-+					12500000, dma_eth0))
-+			goto err0_3;
-+
-+		if (request_irq(ETH0_INTR_VECT, crisv32nw_eth_interrupt, 0,
-+					cardname, dev)) {
-+			crisv32_free_dma(1);
-+err0_3:
-+			crisv32_free_dma(0);
-+err0_2:
-+			free_irq(DMA1_INTR_VECT, dev);
-+err0_1:
-+			free_irq(DMA0_INTR_VECT, dev);
-+			return -EAGAIN;
-+		}
-+	} else {
-+		if (request_irq(DMA6_INTR_VECT, crisv32tx_eth_interrupt,
-+				0, cardname, dev))
-+			return -EAGAIN;
-+
-+		if (request_irq(DMA7_INTR_VECT, crisv32rx_eth_interrupt,
-+				0, cardname, dev))
-+			goto err1_1;
-+
-+		if (crisv32_request_dma(6, cardname, DMA_VERBOSE_ON_ERROR,
-+					0, dma_eth1))
-+			goto err1_2;
-+
-+		if (crisv32_request_dma(7, cardname, DMA_VERBOSE_ON_ERROR,
-+					0, dma_eth1))
-+			goto err1_3;
-+
-+		if (request_irq(ETH1_INTR_VECT, crisv32nw_eth_interrupt, 0,
-+					cardname, dev)) {
-+			crisv32_free_dma(7);
-+err1_3:
-+			crisv32_free_dma(6);
-+err1_2:
-+			free_irq(DMA7_INTR_VECT, dev);
-+err1_1:
-+			free_irq(DMA6_INTR_VECT, dev);
-+			return -EAGAIN;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static int __init crisv32_eth_init_phy(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+
-+	if (RESET_PHY) {
-+#ifdef CONFIG_ETRAXFS
-+		reg_config_rw_pad_ctrl pad_ctrl;
-+		pad_ctrl = REG_RD(config, regi_config, rw_pad_ctrl);
-+		pad_ctrl.phyrst_n = 0;
-+		REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl);
-+
-+		udelay(500); /* RESET_LEN */
-+
-+		pad_ctrl.phyrst_n = 1;
-+		REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl);
-+#else
-+		reg_eth_rw_gen_ctrl gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl);
-+		gen_ctrl.phyrst_n = 0;
-+		REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+
-+		udelay(500); /* RESET_LEN */
-+
-+		gen_ctrl.phyrst_n = 1;
-+		REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+#endif
-+
-+		udelay(200); /* RESET_WAIT */
-+	}
-+
-+	switch (PHY_MODE) {
-+	case FALLBACK_PHY:
-+		/* Fall back on using fixed iff there is no PHY on */
-+		/* the MDIO bus */
-+		np->fixed_phy = crisv32_eth_probe_transceiver(dev) != 0;
-+		if (np->fixed_phy)
-+			printk(KERN_WARNING
-+				"eth: No transciever found, falling back "
-+				"to fixed phy mode\n");
-+		break;
-+
-+	case NO_PHY:
-+		/* Don't even bother looking for a PHY, always rely */
-+		/* on fixed PHY */
-+		np->fixed_phy = 1;
-+		break;
-+
-+	default: /* HAVE_PHY */
-+		/* Look for a PHY and abort if there is none, */
-+		/* otherwise just carry on */
-+		if (crisv32_eth_probe_transceiver(dev)) {
-+			printk(KERN_WARNING
-+				"eth: No transceiver found, "
-+				"removing interface\n");
-+			return -ENODEV;
-+		}
-+		np->fixed_phy = 0;
-+	}
-+
-+	if (np->fixed_phy) {
-+		reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+		/* speed */
-+		np->current_speed = 100;
-+		np->current_speed_selection = 100;	/* Auto. */
-+
-+		/* duplex */
-+		np->full_duplex = 1;
-+		np->current_duplex = full;
-+
-+		rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+		rec_ctrl.duplex = regk_eth_full;
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+	} else {
-+		np->mii_if.supports_gmii = mii_check_gmii_support(&np->mii_if);
-+
-+		/* speed */
-+		np->current_speed = 10;
-+		np->current_speed_selection = 0;	/* Auto. */
-+		np->speed_timer = timer_init;
-+		np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+		np->speed_timer.data = (unsigned long) dev;
-+		np->speed_timer.function = crisv32_eth_check_speed;
-+
-+		/* duplex */
-+		np->full_duplex = 0;
-+		np->current_duplex = autoneg;
-+		np->duplex_timer = timer_init;
-+		np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+		np->duplex_timer.data = (unsigned long) dev;
-+		np->duplex_timer.function = crisv32_eth_check_duplex;
-+	}
-+
-+	return 0;
-+}
-+
-+static void __init crisv32_eth_setup_controller(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	reg_eth_rw_gen_ctrl gen_ctrl;
-+
-+	reg_eth_rw_tr_ctrl tr_ctrl = {
-+		/* SW retransmits to avoid transmitter bugs.  */
-+		.retry = regk_eth_no,
-+		.pad = regk_eth_yes,
-+		.crc = regk_eth_yes
-+	};
-+
-+	reg_eth_rw_rec_ctrl rec_ctrl = {
-+		.ma0 = regk_eth_no,	/* enable at open() */
-+		.broadcast = regk_eth_no,
-+		.max_size = regk_eth_size1522
-+	};
-+
-+	reg_eth_rw_ga_lo ga_lo = { 0 };
-+	reg_eth_rw_ga_hi ga_hi = { 0 };
-+
-+	/*
-+	 * Initialize group address registers to make sure that no
-+	 * unwanted addresses are matched.
-+	 */
-+	REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
-+	REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
-+
-+	/* Configure receiver and transmitter */
-+	REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+	REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+
-+	/*
-+	 * Read from rw_gen_ctrl so that we don't override any previous
-+	 * configuration.
-+	 */
-+	gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl);
-+	gen_ctrl.phy = regk_eth_mii_clk;
-+#ifdef CONFIG_ETRAXFS
-+	/* On ETRAX FS, this bit has reversed meaning */
-+	gen_ctrl.flow_ctrl = regk_eth_no;
-+#else
-+	gen_ctrl.flow_ctrl = regk_eth_yes;
-+#endif
-+
-+	/* Enable ethernet controller with mii clk. */
-+	REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+	gen_ctrl.en = regk_eth_yes;
-+	REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+}
-+
-+static void crisv32_eth_reset_rx_ring(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	int i;
-+
-+	/* cleanup the rx-ring */
-+	for (i = 0; i < NBR_RX_DESC; i++) {
-+		struct sk_buff *skb;
-+		skb = np->dma_rx_descr_list[i].skb;
-+		if (!skb
-+		    || (np->dma_rx_descr_list[i].descr.buf !=
-+			(void *)virt_to_phys(skb->data))) {
-+			if (skb)
-+				dev_kfree_skb(skb);
-+			skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+			np->dma_rx_descr_list[i].skb = skb;
-+			np->dma_rx_descr_list[i].descr.buf =
-+				(char*)virt_to_phys(skb->data);
-+		}
-+		if (np->dma_rx_descr_list[i].descr.in_eop)
-+			np->rx_restarts_dropped++;
-+		np->dma_rx_descr_list[i].descr.after =
-+			(char*)virt_to_phys(skb->data
-+					    + MAX_MEDIA_DATA_SIZE);
-+		np->dma_rx_descr_list[i].descr.eol = 0;
-+		np->dma_rx_descr_list[i].descr.in_eop = 0;
-+		/* Workaround cache bug */
-+		flush_dma_descr(&np->dma_rx_descr_list[i].descr, 1);
-+	}
-+
-+	/* reset rx-ring */
-+	np->active_rx_desc = &np->dma_rx_descr_list[0];
-+	np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1];
-+	np->last_rx_desc = np->prev_rx_desc;
-+	np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1;
-+	flush_dma_descr(&np->dma_rx_descr_list[NBR_RX_DESC - 1].descr, 0);
-+	/* ready to accept new packets.  */
-+	np->new_rx_package = 1;
-+
-+	/* Fill context descriptors. */
-+	np->ctxt_in.next = 0;
-+	np->ctxt_in.saved_data =
-+		(void *)virt_to_phys(&np->active_rx_desc->descr);
-+	np->ctxt_in.saved_data_buf = np->active_rx_desc->descr.buf;
-+}
-+
-+static inline int crisv32_eth_tx_ring_full(struct crisv32_ethernet_local *np)
-+{
-+	crisv32_eth_descr *active = np->active_tx_desc;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	active = phys_to_virt((unsigned long)active->descr.next);
-+#endif
-+	if (active == np->catch_tx_desc)
-+		return 1;
-+	return 0;
-+}
-+
-+static void crisv32_eth_reset_tx_ring(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	/* free un-handled tx packets */
-+	while (np->txpackets || np->catch_tx_desc != np->active_tx_desc) {
-+		np->txpackets--;
-+		if (np->catch_tx_desc->skb)
-+			dev_kfree_skb(np->catch_tx_desc->skb);
-+
-+		np->catch_tx_desc->skb = 0;
-+		np->catch_tx_desc =
-+			phys_to_virt((int)np->catch_tx_desc->descr.next);
-+	}
-+
-+	WARN_ON(np->txpackets != 0);
-+	np->txpackets = 0;
-+
-+	/* reset tx-ring */
-+	np->dma_tx_descr_list[0].descr.buf =
-+		np->dma_tx_descr_list[0].descr.after = 0;
-+	np->dma_tx_descr_list[0].descr.eol = 1;
-+
-+	np->active_tx_desc = &np->dma_tx_descr_list[0];
-+	np->prev_tx_desc = &np->dma_tx_descr_list[NBR_TX_DESC - 1];
-+	np->catch_tx_desc = &np->dma_tx_descr_list[0];
-+
-+	np->ctxt_out.next = 0;
-+	np->ctxt_out.saved_data =
-+		(void *)virt_to_phys(&np->dma_tx_descr_list[0].descr);
-+
-+}
-+
-+static void crisv32_eth_reset_rings(struct net_device *dev)
-+{
-+	crisv32_eth_reset_tx_ring(dev);
-+	crisv32_eth_reset_rx_ring(dev);
-+}
-+
-+/*
-+ * Really advance the receive ring. RX interrupts must be off.
-+ */
-+static void __crisv32_eth_rx_ring_advance(struct crisv32_ethernet_local *np)
-+{
-+	if (np->newbuf)
-+		np->active_rx_desc->descr.buf = (void *) np->newbuf;
-+	np->active_rx_desc->descr.after =
-+		np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE;
-+	np->active_rx_desc->descr.eol = 1;
-+	np->active_rx_desc->descr.in_eop = 0;
-+	np->active_rx_desc = phys_to_virt((int)np->active_rx_desc->descr.next);
-+	barrier();
-+	np->prev_rx_desc->descr.eol = 0;
-+
-+	/* Workaround cache bug.  */
-+	flush_dma_descr(&np->prev_rx_desc->descr, 0);
-+	np->prev_rx_desc = phys_to_virt((int)np->prev_rx_desc->descr.next);
-+	flush_dma_descr(&np->prev_rx_desc->descr, 1);
-+}
-+
-+/*
-+ * Advance the receive ring. RX interrupts must be off.
-+ */
-+static inline void
-+crisv32_eth_rx_ring_advance(struct crisv32_ethernet_local *np)
-+{
-+	/*
-+	 * When the input DMA reaches eol precaution must be taken, otherwise
-+	 * the DMA could stop. The problem occurs if the eol flag is re-placed
-+	 * on the descriptor that the DMA stands on before the DMA proceed to
-+	 * the next descriptor. This case could, for example, happen if there
-+	 * is a traffic burst and then the network goes silent. To prevent this
-+	 * we make sure that we do not set the eol flag on the descriptor that
-+	 * the DMA stands on.
-+	 */
-+	unsigned long dma_pos;
-+
-+	/* Get the current input dma position. */
-+	dma_pos = REG_RD_INT(dma, np->dma_in_inst, rw_saved_data);
-+
-+	if (virt_to_phys(&np->active_rx_desc->descr) != dma_pos) {
-+		crisv32_eth_descr *cur, *nxt;
-+
-+		/* Now really advance the ring one step.  */
-+		__crisv32_eth_rx_ring_advance(np);
-+
-+		cur = np->active_rx_desc;
-+		nxt = (void *)phys_to_virt((unsigned long)cur->descr.next);
-+		flush_dma_descr(&cur->descr, 0);
-+		flush_dma_descr(&nxt->descr, 0);
-+		if (!cur->descr.in_eop && nxt->descr.in_eop) {
-+			/* TODO: Investigate this more. The DMA seems to have
-+			   skipped a descriptor, possibly due to incoherence
-+			   between the CPU L1 cache and the DMA updates to the
-+			   descriptor.  */
-+			np->newbuf = (unsigned long) np->active_rx_desc->descr.buf;
-+			__crisv32_eth_rx_ring_advance(np);
-+		}
-+		/* flush after peek.  */
-+		flush_dma_descr(&cur->descr, 0);
-+		flush_dma_descr(&nxt->descr, 0);
-+	} else {
-+		/* delay the advancing of the ring.  */
-+		np->new_rx_package = 0;
-+	}
-+}
-+
-+static void __init crisv32_eth_init_rings(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	int i;
-+
-+	/* Initialise receive descriptors for interface. */
-+	for (i = 0; i < NBR_RX_DESC; i++) {
-+		struct sk_buff *skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+
-+		np->dma_rx_descr_list[i].skb = skb;
-+		np->dma_rx_descr_list[i].descr.buf =
-+			(char*)virt_to_phys(skb->data);
-+		np->dma_rx_descr_list[i].descr.after =
-+		    (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE);
-+
-+		np->dma_rx_descr_list[i].descr.eol = 0;
-+		np->dma_rx_descr_list[i].descr.in_eop = 0;
-+		np->dma_rx_descr_list[i].descr.next =
-+		    (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr);
-+	}
-+	/* bend the list into a ring */
-+	np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next =
-+		(void *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
-+
-+	/* Initialize transmit descriptors. */
-+	for (i = 0; i < NBR_TX_DESC; i++) {
-+		np->dma_tx_descr_list[i].descr.wait = 1;
-+		np->dma_tx_descr_list[i].descr.eol = 0;
-+		np->dma_tx_descr_list[i].descr.out_eop = 0;
-+		np->dma_tx_descr_list[i].descr.next =
-+			(void*)virt_to_phys(&np->dma_tx_descr_list[i+1].descr);
-+	}
-+	/* bend the list into a ring */
-+	np->dma_tx_descr_list[NBR_TX_DESC - 1].descr.next =
-+		(void *) virt_to_phys(&np->dma_tx_descr_list[0].descr);
-+
-+	crisv32_eth_reset_rings(dev);
-+}
-+
-+static void __init crisv32_init_leds(int ledgrp, struct net_device *dev)
-+{
-+	struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	/* Use already allocated led grp if initialized */
-+	if (crisv32_leds[ledgrp] != NULL) {
-+		np->leds = crisv32_leds[ledgrp];
-+		return;
-+	}
-+
-+	crisv32_leds[ledgrp] =
-+		kmalloc(sizeof(struct crisv32_eth_leds), GFP_KERNEL);
-+
-+	crisv32_leds[ledgrp]->ledgrp = ledgrp;
-+	crisv32_leds[ledgrp]->led_active = 0;
-+	crisv32_leds[ledgrp]->ifisup[0] = 0;
-+	crisv32_leds[ledgrp]->ifisup[1] = 0;
-+	/* NOTE: Should this value be set to zero as the jiffies timer
-+	   can wrap? */
-+	crisv32_leds[ledgrp]->led_next_time = jiffies;
-+
-+	crisv32_leds[ledgrp]->clear_led_timer = timer_init;
-+	crisv32_leds[ledgrp]->clear_led_timer.function =
-+		crisv32_clear_network_leds;
-+	crisv32_leds[ledgrp]->clear_led_timer.data = (unsigned long) dev;
-+
-+	spin_lock_init(&crisv32_leds[ledgrp]->led_lock);
-+
-+	np->leds = crisv32_leds[ledgrp];
-+}
-+
-+static int __init crisv32_ethernet_init(void)
-+{
-+	struct crisv32_ethernet_local *np;
-+	int ret = 0;
-+
-+#ifdef CONFIG_ETRAXFS
-+	printk("ETRAX FS 10/100MBit ethernet v0.01 (c)"
-+	       " 2003 Axis Communications AB\n");
-+#else
-+	printk("ARTPEC-3 10/100 MBit ethernet (c)"
-+	       " 2003-2009 Axis Communications AB\n");
-+#endif
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	{
-+		reg_clkgen_rw_clk_ctrl clk_ctrl = REG_RD(clkgen, regi_clkgen,
-+							 rw_clk_ctrl);
-+		clk_ctrl.eth = clk_ctrl.dma0_1_eth = regk_clkgen_yes;
-+		REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
-+	}
-+#endif
-+{
-+	int iface0 = 0;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	if (crisv32_pinmux_alloc_fixed(pinmux_eth))
-+		panic("Eth pinmux\n");
-+#endif
-+
-+	if (!(crisv32_dev[iface0] = alloc_etherdev(sizeof *np)))
-+		return -ENOMEM;
-+
-+	ret |= crisv32_ethernet_device_init(crisv32_dev[iface0]);
-+
-+#if defined(CONFIG_ETRAX_ETH0_USE_LEDGRP0)
-+	crisv32_init_leds(CRIS_LED_GRP_0,crisv32_dev[iface0]);
-+#elif defined(CONFIG_ETRAX_ETH0_USE_LEDGRP1)
-+	crisv32_init_leds(CRIS_LED_GRP_1,crisv32_dev[iface0]);
-+#else
-+	crisv32_init_leds(CRIS_LED_GRP_NONE,crisv32_dev[iface0]);
-+#endif
-+
-+	np = (struct crisv32_ethernet_local *) netdev_priv(crisv32_dev[iface0]);
-+	np->eth_inst = regi_eth0;
-+	np->dma_out_inst = regi_dma0;
-+	np->dma_in_inst = regi_dma1;
-+
-+	np->mii_if.dev = crisv32_dev[iface0];
-+	np->mii_if.mdio_read = crisv32_eth_get_mdio_reg;
-+	np->mii_if.mdio_write = crisv32_eth_set_mdio_reg;
-+	np->mii_if.phy_id_mask = 0x1f;
-+	np->mii_if.reg_num_mask = 0x1f;
-+
-+	np->use_leds = 1;
-+	np->autoneg_normal = 1;
-+
-+
-+	register_netdev(crisv32_dev[iface0]);
-+
-+	/* Set up default MAC address */
-+	memcpy(crisv32_dev[iface0]->dev_addr, default_mac_iface0.sa_data, 6);
-+	crisv32_eth_set_mac_address(crisv32_dev[iface0], &default_mac_iface0);
-+	if (crisv32_eth_request_irqdma(crisv32_dev[iface0]))
-+		printk("%s: eth0 unable to allocate IRQ and DMA resources\n",
-+		       __func__);
-+	np->txpackets = 0;
-+	crisv32_eth_init_rings(crisv32_dev[iface0]);
-+	crisv32_eth_setup_controller(crisv32_dev[iface0]);
-+	ret |= crisv32_eth_init_phy(crisv32_dev[iface0]);
-+	if (ret) {
-+		unregister_netdev(crisv32_dev[iface0]);
-+		return ret;
-+	}
-+}
-+
-+#ifdef CONFIG_ETRAX_ETHERNET_IFACE1
-+{
-+	int iface1 = 0;
-+	/* Default MAC address for interface 1.
-+	 * The real one will be set later. */
-+	static struct sockaddr default_mac_iface1 =
-+		{0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x01}};
-+
-+	if (crisv32_pinmux_alloc_fixed(pinmux_eth1))
-+		panic("Eth pinmux\n");
-+
-+	/* Increase index to device array if interface 0 is enabled as well.*/
-+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0
-+	iface1++;
-+#endif
-+	if (!(crisv32_dev[iface1] = alloc_etherdev(sizeof *np)))
-+		return -ENOMEM;
-+
-+	ret |= crisv32_ethernet_device_init(crisv32_dev[iface1]);
-+
-+#if defined(CONFIG_ETRAX_ETH1_USE_LEDGRP0)
-+	crisv32_init_leds(CRIS_LED_GRP_0,crisv32_dev[iface1]);
-+#elif defined(CONFIG_ETRAX_ETH1_USE_LEDGRP1)
-+	crisv32_init_leds(CRIS_LED_GRP_1,crisv32_dev[iface1]);
-+#else
-+	crisv32_init_leds(CRIS_LED_GRP_NONE,crisv32_dev[iface1]);
-+#endif
-+
-+	np = (struct crisv32_ethernet_local *) netdev_priv(crisv32_dev[iface1]);
-+	np->eth_inst = regi_eth1;
-+	np->dma_out_inst = regi_dma6;
-+	np->dma_in_inst = regi_dma7;
-+
-+	np->mii_if.dev = crisv32_dev[iface1];
-+	np->mii_if.mdio_read = crisv32_eth_get_mdio_reg;
-+	np->mii_if.mdio_write = crisv32_eth_set_mdio_reg;
-+	np->mii_if.phy_id_mask = 0x1f;
-+	np->mii_if.reg_num_mask = 0x1f;
-+
-+
-+	register_netdev(crisv32_dev[iface1]);
-+
-+	/* Set up default MAC address */
-+	memcpy(crisv32_dev[iface1]->dev_addr, default_mac_iface1.sa_data, 6);
-+	crisv32_eth_set_mac_address(crisv32_dev[iface1], &default_mac_iface1);
-+
-+	if (crisv32_eth_request_irqdma(crisv32_dev[iface1]))
-+		printk("%s: eth1 unable to allocate IRQ and DMA resources\n",
-+		       __func__);
-+	np->txpackets = 0;
-+	crisv32_eth_init_rings(crisv32_dev[iface1]);
-+	crisv32_eth_setup_controller(crisv32_dev[iface1]);
-+	ret |= crisv32_eth_init_phy(crisv32_dev[iface1]);
-+	if (ret) {
-+		unregister_netdev(crisv32_dev[iface1]);
-+		return ret;
-+	}
-+}
-+#endif /* CONFIG_ETRAX_ETHERNET_IFACE1 */
-+
-+#ifdef CONFIG_CPU_FREQ
-+	cpufreq_register_notifier(&crisv32_ethernet_freq_notifier_block,
-+				  CPUFREQ_TRANSITION_NOTIFIER);
-+#endif
-+
-+	return ret;
-+}
-+
-+static struct net_device_ops crisv32_netdev_ops = {
-+	.ndo_open = crisv32_eth_open,
-+	.ndo_stop = crisv32_eth_close,
-+	.ndo_start_xmit = crisv32_eth_send_packet,
-+	.ndo_set_rx_mode = crisv32_eth_set_rx_mode,
-+	.ndo_validate_addr = eth_validate_addr,
-+	.ndo_set_mac_address = crisv32_eth_set_mac_address,
-+	.ndo_do_ioctl =crisv32_eth_ioctl,
-+	.ndo_get_stats = crisv32_get_stats,
-+	.ndo_tx_timeout = crisv32_eth_do_tx_recovery,
-+	.ndo_set_config = crisv32_eth_set_config,
-+};
-+
-+static int __init crisv32_ethernet_device_init(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np;
-+	struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+
-+	dev->base_addr = 0;	/* Just to have something to show. */
-+
-+	/* we do our own locking */
-+	dev->features |= NETIF_F_LLTX;
-+
-+	/* We use several IRQs and DMAs so just report 0 here. */
-+	dev->irq = 0;
-+	dev->dma = 0;
-+
-+	/*
-+	 * Fill in our handlers so the network layer can talk to us in the
-+	 * future.
-+	 */
-+	dev->netdev_ops = &crisv32_netdev_ops;
-+	dev->ethtool_ops = &crisv32_ethtool_ops;
-+	dev->watchdog_timeo = HZ * 10;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	dev->poll_controller = crisv32_netpoll;
-+#endif
-+	np = netdev_priv(dev);
-+	np->dev = dev;
-+
-+	/*
-+	 * 8 skbs keeps the system very reponsive even under high load.
-+	 * At 64 the system locks, pretty much the same way as without NAPI.
-+	 *
-+	 * TODO: meassure with 2 interfaces
-+	 */
-+	netif_napi_add(dev, &np->napi, crisv32_eth_poll, 8);
-+
-+	spin_lock_init(&np->lock);
-+	spin_lock_init(&np->transceiver_lock);
-+
-+	np->receive_timer = timer_init;
-+	np->receive_timer.data = (unsigned)dev;
-+	np->receive_timer.function = receive_timeout;
-+
-+	INIT_WORK(&np->receive_work, receive_timeout_work);
-+
-+	np->transmit_timer = timer_init;
-+	np->transmit_timer.data = (unsigned)dev;
-+	np->transmit_timer.function = transmit_timeout;
-+
-+	return 0;
-+}
-+
-+static int crisv32_eth_open(struct net_device *dev)
-+{
-+	struct sockaddr mac_addr;
-+	reg_dma_rw_ack_intr ack_intr = { .data = 1, .in_eop = 1 };
-+	reg_eth_rw_clr_err clr_err = {.clr = regk_eth_yes};
-+	/*
-+	 * dont interrupt us at any stat counter thresholds, only at urun
-+	 * and exc_col.
-+	 */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	/* For Artpec-3 we use overrun to workaround voodoo TR 87 */
-+	int intr_mask_nw = 0x1c00;
-+#else
-+	int intr_mask_nw = 0x1800;
-+#endif
-+	int eth_ack_intr = 0xffff;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->lock);
-+	crisv32_eth_set_gigabit(np, 0);
-+
-+	crisv32_disable_tx_ints(np);
-+	crisv32_disable_rx_ints(np);
-+
-+	REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+	REG_WR_INT(eth, np->eth_inst, rw_ack_intr, eth_ack_intr);
-+	REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
-+	crisv32_eth_reset_rings(dev);
-+
-+	/* Give the hardware an idea of what MAC address we want. */
-+	memcpy(mac_addr.sa_data, dev->dev_addr, dev->addr_len);
-+	crisv32_eth_set_mac_address(dev, &mac_addr);
-+
-+	/* Enable irq and make sure that the irqs are cleared. */
-+	REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+	REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+	crisv32_disconnect_eth_rx_dma(np);
-+
-+	/* Prepare input DMA. */
-+	DMA_RESET(np->dma_in_inst);
-+	DMA_ENABLE(np->dma_in_inst);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2);
-+#endif
-+	DMA_START_CONTEXT(np->dma_in_inst, virt_to_phys(&np->ctxt_in));
-+	DMA_CONTINUE(np->dma_in_inst);
-+	crisv32_enable_rx_ints(np);
-+	crisv32_start_receiver(np);
-+
-+	/* Prepare output DMA. */
-+	DMA_RESET(np->dma_out_inst);
-+	DMA_ENABLE(np->dma_out_inst);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4);
-+#endif
-+	crisv32_connect_eth_rx_dma(np);
-+
-+	netif_start_queue(dev);
-+	crisv32_enable_tx_ints(np);
-+
-+	if (!np->fixed_phy) {
-+		/* Start duplex/speed timers */
-+		if (!timer_pending(&np->speed_timer))
-+			add_timer(&np->speed_timer);
-+		if (!timer_pending(&np->duplex_timer))
-+			add_timer(&np->duplex_timer);
-+	}
-+
-+	spin_unlock(&np->lock);
-+	/*
-+	 * We are now ready to accept transmit requests from the queueing
-+	 * layer of the networking.
-+	 */
-+	np->link = 1;
-+	netif_carrier_on(dev);
-+	napi_enable(&np->napi);
-+
-+	return 0;
-+}
-+
-+static int crisv32_eth_close(struct net_device *dev)
-+{
-+	reg_dma_rw_ack_intr ack_intr = {0};
-+
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	unsigned long flags;
-+
-+	del_timer(&np->transmit_timer);
-+	spin_lock_irqsave(&np->lock, flags);
-+
-+	/* stop the receiver before the DMA channels to avoid overruns. */
-+	crisv32_disable_rx_ints(np);
-+	napi_disable(&np->napi);
-+	crisv32_stop_receiver(np);
-+
-+	netif_stop_queue(dev);
-+
-+	/* Reset the TX DMA in case it has hung on something. */
-+	DMA_RESET(np->dma_in_inst);
-+
-+	/* Stop DMA */
-+	DMA_STOP(np->dma_in_inst);
-+	DMA_STOP(np->dma_out_inst);
-+
-+	/* Disable irq and make sure that the irqs are cleared. */
-+	crisv32_disable_tx_ints(np);
-+	ack_intr.data = 1;
-+	REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+
-+	ack_intr.in_eop = 1;
-+	REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+	np->sender_started = 0;
-+	spin_unlock_irqrestore(&np->lock, flags);
-+
-+	/* Update the statistics. */
-+	update_rx_stats(np);
-+	update_tx_stats(np);
-+
-+	if (!np->fixed_phy) {
-+		/* Stop speed/duplex timers */
-+		del_timer(&np->speed_timer);
-+		del_timer(&np->duplex_timer);
-+	}
-+
-+	return 0;
-+}
-+
-+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr)
-+{
-+	int i;
-+	static int first = 1;
-+
-+	unsigned char *addr = ((struct sockaddr*)vpntr)->sa_data;
-+
-+	reg_eth_rw_ma0_lo ma0_lo =
-+	  { addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24)};
-+
-+	reg_eth_rw_ma0_hi ma0_hi = { addr[4] | (addr[5] << 8) };
-+
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	/* Remember the address. */
-+	memcpy(dev->dev_addr, addr, dev->addr_len);
-+
-+	/*
-+	 * Write the address to the hardware.
-+	 * Note the way the address is wrapped:
-+	 * ma0_l0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
-+	 * ma0_hi = a0_4 | (a0_5 << 8);
-+	 */
-+	REG_WR(eth, np->eth_inst, rw_ma0_lo, ma0_lo);
-+	REG_WR(eth, np->eth_inst, rw_ma0_hi, ma0_hi);
-+
-+	if (first) {
-+		printk(KERN_INFO "%s: changed MAC to ", dev->name);
-+
-+		for (i = 0; i < 5; i++)
-+			printk("%02X:", dev->dev_addr[i]);
-+		printk("%02X\n", dev->dev_addr[i]);
-+
-+		first = 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *) dev_id;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	reg_dma_r_masked_intr masked_in;
-+
-+	masked_in = REG_RD(dma, np->dma_in_inst, r_masked_intr);
-+
-+	if (masked_in.in_eop) {
-+		reg_dma_rw_ack_intr ack_intr = {0};
-+
-+		/*
-+		 * Ack the rx irq even if we are not prepared to start
-+		 * polling. This is needed to handle incomming packets
-+		 * during the stop sequence.
-+		 */
-+		ack_intr.in_eop = 1;
-+		REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+		mod_timer(&np->receive_timer, jiffies + HZ);
-+		np->do_rx_recovery = 0;
-+
-+		if (napi_schedule_prep(&np->napi)) {
-+			crisv32_disable_rx_ints(np);
-+			crisv32_disable_tx_ints(np);
-+			/* put us onto the poll list */
-+			__napi_schedule(&np->napi);
-+		}
-+	} else {
-+		/* Unexpected, ACK it and hope for the best.  */
-+		reg_dma_rw_ack_intr ack_intr = {
-+			.group = 1,
-+			.ctxt = 1,
-+			.data = 1,
-+			.in_eop = 0,
-+			.stream_cmd = 1,
-+			.dummy1 = ~0
-+		};
-+		REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static inline void crisv32_eth_roll_tx_timer(struct crisv32_ethernet_local *np)
-+{
-+	/* If there are more packets in the ring, roll the tx timer.  */
-+	if (np->txpackets) {
-+		/* Eth pause frames may halt us for up to 320ms (100mbit).  */
-+		unsigned long timeout = jiffies + (HZ / 3) + 1;
-+		mod_timer(&np->transmit_timer, timeout);
-+	}
-+	else
-+		del_timer(&np->transmit_timer);
-+}
-+
-+/* Call with np->lock held.  */
-+static void _crisv32_tx_ring_advance(struct crisv32_ethernet_local *np,
-+				     int cleanup)
-+{
-+	reg_dma_rw_stat stat;
-+	dma_descr_data *dma_pos;
-+	struct net_device *dev = np->dev;
-+	int eol;
-+
-+	/* Get the current output dma position. */
-+	dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data));
-+	stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+	eol = stat.list_state == regk_dma_data_at_eol;
-+	if (cleanup || eol)
-+		dma_pos = &np->active_tx_desc->descr;
-+
-+	/* Take care of transmited dma descriptors and report sent packet. */
-+	while (np->txpackets && (&np->catch_tx_desc->descr != dma_pos)) {
-+		/* Update sent packet statistics. */
-+		np->stats.tx_bytes += np->catch_tx_desc->skb->len;
-+		np->stats.tx_packets++;
-+
-+		dev_kfree_skb_any(np->catch_tx_desc->skb);
-+		np->catch_tx_desc->skb = 0;
-+		np->txpackets--;
-+		np->catch_tx_desc->descr.buf = 0;
-+		np->catch_tx_desc =
-+			phys_to_virt((int)np->catch_tx_desc->descr.next);
-+		np->do_tx_recovery = 0;
-+		np->retrans = 0;
-+
-+		netif_wake_queue(dev);
-+	}
-+}
-+
-+static inline void crisv32_tx_ring_advance(struct crisv32_ethernet_local *np)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&np->lock, flags);
-+	_crisv32_tx_ring_advance(np, 0);
-+	crisv32_eth_roll_tx_timer(np);
-+	spin_unlock_irqrestore(&np->lock, flags);
-+}
-+
-+static inline int crisv32_tx_complete(struct crisv32_ethernet_local *np)
-+{
-+	reg_dma_rw_ack_intr ack_intr = { .data = 1 };
-+	reg_dma_r_intr ints;
-+	int r = 0;
-+
-+	/* We are interested in the unmasked raw interrupt source here. When
-+	   polling with tx interrupts masked off we still want to do
-+	   tx completition when the DMA makes progress.  */
-+	ints = REG_RD(dma, np->dma_out_inst, r_intr);
-+	if (ints.data)
-+	{
-+		/* ack the interrupt, if it was active */
-+		REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+		crisv32_tx_ring_advance(np);
-+		r = 1;
-+	}
-+	return r;
-+}
-+
-+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev_id);
-+
-+	crisv32_tx_complete(np);
-+	return IRQ_HANDLED;
-+}
-+
-+
-+/* Update receive errors. */
-+static void
-+update_rx_stats(struct crisv32_ethernet_local *np)
-+{
-+	reg_eth_rs_rec_cnt r;
-+
-+	r = REG_RD(eth, np->eth_inst, rs_rec_cnt);
-+
-+	np->stats.rx_over_errors += r.congestion;
-+	np->stats.rx_crc_errors += r.crc_err;
-+	np->stats.rx_frame_errors += r.align_err;
-+	np->stats.rx_length_errors += r.oversize;
-+	np->stats.rx_errors += r.crc_err + r.align_err +
-+			r.oversize + r.congestion;
-+}
-+
-+/* Update transmit errors. */
-+static void update_tx_stats(struct crisv32_ethernet_local *np)
-+{
-+	reg_eth_rs_tr_cnt r;
-+	reg_eth_rs_phy_cnt rp;
-+
-+	r = REG_RD(eth, np->eth_inst, rs_tr_cnt);
-+	rp = REG_RD(eth, np->eth_inst, rs_phy_cnt);
-+
-+	/* r.deferred is not good for counting collisions because it also
-+	   includes frames that have to wait for the interframe gap. That
-+	   means we get deferred frames even when in full duplex.
-+	   Here we don't actually count the number of collisions that
-+	   occured (artpec3 seems to lack such a counter), instead we count
-+	   the number of frames that collide once or more.  */
-+	np->stats.collisions += r.mult_col + r.single_col;
-+	np->stats.tx_window_errors += r.late_col;
-+	np->stats.tx_carrier_errors += rp.carrier_loss;
-+
-+	/* Ordinary collisions are not errors, they are just part of
-+	   ethernet's bus arbitration and congestion control mechanisms.
-+	   Late collisions are serious errors though.  */
-+	np->stats.tx_errors += r.late_col;
-+}
-+
-+/* Get current statistics. */
-+static struct net_device_stats *crisv32_get_stats(struct net_device *dev)
-+{
-+	unsigned long flags;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	spin_lock_irqsave(&np->lock, flags);
-+
-+	update_rx_stats(np);
-+	update_tx_stats(np);
-+
-+	spin_unlock_irqrestore(&np->lock, flags);
-+
-+	return &np->stats;
-+}
-+
-+/* Check for network errors. This acknowledge the received interrupt. */
-+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *) dev_id;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	reg_eth_r_masked_intr intr_mask;
-+	int ack_intr = 0xffff;
-+	reg_eth_rw_clr_err clr_err;
-+
-+	intr_mask = REG_RD(eth, np->eth_inst, r_masked_intr);
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	/* Only apply the workaround if it is not already pending.
-+	   enable_eth_ints will re-enable the orun interrupt regardless
-+	   of pending_overrun.  */
-+	if (intr_mask.orun && !np->pending_overrun) {
-+		reg_eth_rw_rec_ctrl rec_ctrl =
-+			REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+		np->saved_rec_ctrl = rec_ctrl;
-+		np->overrun_set = 1;
-+		DMA_STOP(np->dma_in_inst);
-+		rec_ctrl.ma0 = regk_eth_no;
-+		rec_ctrl.broadcast = regk_eth_no;
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+		np->saved_ga_lo = REG_RD_INT(eth, np->eth_inst, rw_ga_lo);
-+		np->saved_ga_hi = REG_RD_INT(eth, np->eth_inst, rw_ga_hi);
-+		REG_WR_INT(eth, np->eth_inst, rw_ga_lo, 0);
-+		REG_WR_INT(eth, np->eth_inst, rw_ga_hi, 0);
-+		REG_WR_INT(eth, np->eth_inst, rw_intr_mask,
-+			REG_RD_INT(eth, np->eth_inst, rw_intr_mask) & 0xfbff);
-+		REG_WR_INT(eth, np->eth_inst, rw_ack_intr, 0x400);
-+		intr_mask.orun = 0;
-+		np->pending_overrun = 1;
-+		if (!np->napi_processing)
-+			crisv32_eth_restart_rx_dma(np->dev, np);
-+
-+		return IRQ_HANDLED;
-+	}
-+#endif
-+
-+	/*
-+	 * Check for underrun and/or excessive collisions. Note that the
-+	 * rw_clr_err register clears both underrun and excessive collision
-+	 * errors, so there's no need to check them separately.
-+	 */
-+	if (np->sender_started
-+	    && (intr_mask.urun || intr_mask.exc_col)) {
-+		unsigned long flags;
-+
-+		/* Underrun are considered to be tx-errors.  */
-+		np->stats.tx_errors += intr_mask.urun;
-+		np->stats.tx_fifo_errors += intr_mask.urun;
-+
-+		/*
-+		 * Protect against the tx-interrupt messing with
-+		 * the tx-ring.
-+		 */
-+		spin_lock_irqsave(&np->lock, flags);
-+
-+		/* DMA should have stopped now, eat from the ring before
-+		   removing anything due to tx errors.  */
-+		_crisv32_tx_ring_advance(np, 0);
-+
-+		/*
-+		 * Drop packets after 15 retries.
-+		 * TODO: Add backoff.
-+		 */
-+		if (np->retrans > 15 && np->txpackets) {
-+			dev_kfree_skb_irq(np->catch_tx_desc->skb);
-+			np->catch_tx_desc->skb = 0;
-+			np->catch_tx_desc->descr.buf = 0;
-+			np->catch_tx_desc =
-+				phys_to_virt((int)
-+					     np->catch_tx_desc->descr.next);
-+			flush_dma_descr(&np->catch_tx_desc->descr, 0);
-+
-+			np->txpackets--;
-+			np->retrans = 0;
-+			netif_wake_queue(dev);
-+			np->stats.tx_dropped++;
-+		}
-+		np->ctxt_out.next = 0;
-+		if (np->txpackets) {
-+			np->retrans++;
-+			np->ctxt_out.saved_data = (void *)
-+				virt_to_phys(&np->catch_tx_desc->descr);
-+			np->ctxt_out.saved_data_buf =
-+				np->catch_tx_desc->descr.buf;
-+			WARN_ON(!np->ctxt_out.saved_data_buf);
-+			flush_dma_descr(&np->catch_tx_desc->descr, 0);
-+			cris_flush_cache_range(&np->ctxt_out,
-+					       sizeof np->ctxt_out);
-+
-+			/* restart the DMA */
-+			DMA_START_CONTEXT(np->dma_out_inst,
-+					  (int) virt_to_phys(&np->ctxt_out));
-+			np->sender_started = 1;
-+		}
-+		else {
-+			/* Load dummy context but do not load the data
-+			   descriptor nor start the burst. This brings the
-+			   buggy eth transmitter back in sync with the DMA
-+			   avoiding malformed frames.  */
-+			REG_WR(dma, np->dma_out_inst, rw_group_down,
-+			       (int) virt_to_phys(&np->ctxt_out));
-+			DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+			np->sender_started = 0;
-+		}
-+		crisv32_eth_roll_tx_timer(np);
-+		spin_unlock_irqrestore(&np->lock, flags);
-+	}
-+
-+	ack_intr = *(u32 *)&intr_mask;
-+	REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr);
-+	clr_err.clr = 1;
-+	REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+
-+	update_rx_stats(np);
-+	update_tx_stats(np);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* We have a good packet(s), get it/them out of the buffers. */
-+static int crisv32_eth_receive_packet(struct net_device *dev)
-+{
-+	int length;
-+	struct sk_buff *skb;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	struct sk_buff *tmp;
-+	unsigned long flags;
-+
-+	DEBUG(printk("crisv32_receive_packet\n"));
-+
-+	/* Roll the rx bug timer.  */
-+	mod_timer(&np->receive_timer, jiffies + HZ);
-+
-+	/* Activate LED */
-+	spin_lock_irqsave(&np->leds->led_lock, flags);
-+	if (!np->leds->led_active && time_after(jiffies,
-+						np->leds->led_next_time)) {
-+		/* light the network leds depending on the current speed. */
-+		crisv32_set_network_leds(CRIS_LED_ACTIVITY, dev);
-+
-+		/* Set the earliest time we may clear the LED */
-+		np->leds->led_next_time = jiffies + NET_FLASH_TIME;
-+		np->leds->led_active = 1;
-+		np->leds->clear_led_timer.data = (unsigned long) dev;
-+		mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
-+	}
-+	spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+	/* Discard CRC (4 bytes). */
-+	length = (np->active_rx_desc->descr.after) -
-+		(np->active_rx_desc->descr.buf) - 4;
-+
-+	tmp = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+	if (!tmp) {
-+		np->stats.rx_errors++;
-+		printk(KERN_NOTICE "%s: memory squeeze,"
-+		       " dropping packet.",
-+		       dev->name);
-+		return 0;
-+	}
-+	skb = np->active_rx_desc->skb;
-+	np->active_rx_desc->skb = tmp;
-+	skb_put(skb, length);
-+
-+	np->newbuf = virt_to_phys(np->active_rx_desc->skb->data);
-+
-+	skb->dev = dev;
-+	skb->protocol = eth_type_trans(skb, dev);
-+	skb->ip_summed = CHECKSUM_NONE;
-+
-+	np->stats.multicast += skb->pkt_type == PACKET_MULTICAST;
-+	/* Send the packet to the upper layer. */
-+	netif_receive_skb(skb);
-+	np->last_rx_desc =
-+		phys_to_virt((int)
-+			     np->last_rx_desc->descr.next);
-+
-+	/* Forward rotate the receive ring.  */
-+	crisv32_eth_rx_ring_advance(np);
-+	return length;
-+}
-+
-+/* Must be called with the np-lock held.  */
-+static void
-+__crisv32_eth_restart_rx_dma(struct net_device* dev,
-+			     struct crisv32_ethernet_local *np)
-+{
-+	reg_dma_rw_ack_intr ack_intr = {0};
-+	reg_dma_rw_stream_cmd dma_sc = {0};
-+	reg_dma_rw_stat stat;
-+	int resets = 0;
-+	reg_eth_rw_intr_mask eth_intr_mask;
-+
-+	np->rx_dma_restarts++;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	if (np->pending_overrun) {
-+		np->pending_overrun = 0;
-+		REG_WR_INT(eth, np->eth_inst, rw_ga_lo, np->saved_ga_lo);
-+		REG_WR_INT(eth, np->eth_inst, rw_ga_hi, np->saved_ga_hi);
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, np->saved_rec_ctrl);
-+		REG_WR_INT(eth, np->eth_inst, rw_intr_mask,
-+			   REG_RD_INT(eth, regi_eth, rw_intr_mask) | 0x400);
-+		DMA_CONTINUE(np->dma_in_inst);
-+	}
-+#endif
-+	/* Bring down the receiver.  */
-+	crisv32_disable_rx_ints(np);
-+	crisv32_disconnect_eth_rx_dma(np);
-+
-+	/* Stop DMA and ack possible ints.  */
-+	DMA_STOP(np->dma_in_inst);
-+	ack_intr.in_eop = 1;
-+	REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+	crisv32_stop_receiver(np);
-+
-+	/* Disable overrun interrupts while receive is shut off. */
-+	eth_intr_mask = REG_RD(eth, np->eth_inst, rw_intr_mask);
-+	eth_intr_mask.orun = regk_eth_no;
-+	REG_WR(eth, np->eth_inst, rw_intr_mask, eth_intr_mask);
-+	/* ACK overrun.  */
-+	REG_WR_INT(eth, np->eth_inst, rw_ack_intr, 0x400);
-+
-+	crisv32_eth_reset_rx_ring(dev);
-+  reset:
-+	/* TODO: if nr resets grows to high we should reboot.  */
-+	if (resets++ > 0)
-+		printk("reset DMA %d.\n", resets);
-+
-+	DMA_RESET(np->dma_in_inst);
-+	/* Wait for the channel to reset.  */
-+	do {
-+		stat = REG_RD(dma, np->dma_in_inst, rw_stat);
-+	} while (stat.mode != regk_dma_rst);
-+
-+	/* Now bring the rx path back up.  */
-+	DMA_ENABLE(np->dma_in_inst);
-+	if (dma_wait_busy(np->dma_in_inst, 100))
-+		goto reset;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+//	DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2);
-+	dma_sc.cmd = (regk_dma_set_w_size2);
-+	REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc);
-+	if (dma_wait_busy(np->dma_in_inst, 100))
-+		goto reset;
-+#endif
-+
-+//	DMA_START_CONTEXT(np->dma_in_inst, virt_to_phys(&np->ctxt_in));
-+	REG_WR_INT(dma, np->dma_in_inst, rw_group_down, (int)&np->ctxt_in);
-+
-+//	DMA_WR_CMD(np->dma_in_inst, regk_dma_load_c);
-+	dma_sc.cmd = (regk_dma_load_c);
-+	REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc);
-+	if (dma_wait_busy(np->dma_in_inst, 100))
-+		goto reset;
-+
-+//	DMA_WR_CMD(np->dma_in_inst, regk_dma_load_d | regk_dma_burst);
-+	dma_sc.cmd = (regk_dma_load_d | regk_dma_burst);
-+	REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc);
-+
-+	if (dma_wait_busy(np->dma_in_inst, 100))
-+		goto reset;
-+
-+	/* Now things get critical again. Don't give us any interrupts until
-+	   the following sequence is complete.  */
-+	DMA_CONTINUE(np->dma_in_inst);
-+	np->overrun_set = 0;
-+	crisv32_enable_rx_ints(np);
-+	crisv32_start_receiver(np);
-+
-+	/* Reenable overrun interrupts when receive is started again. */
-+	eth_intr_mask = REG_RD(eth, np->eth_inst, rw_intr_mask);
-+	eth_intr_mask.orun = regk_eth_yes;
-+	REG_WR(eth, np->eth_inst, rw_intr_mask, eth_intr_mask);
-+
-+	crisv32_connect_eth_rx_dma(np);
-+}
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+static void
-+crisv32_eth_restart_rx_dma(struct net_device* dev,
-+			   struct crisv32_ethernet_local *np)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&np->lock, flags);
-+	__crisv32_eth_restart_rx_dma(dev, np);
-+	spin_unlock_irqrestore(&np->lock, flags);
-+}
-+#endif
-+
-+/*
-+ * Is there work to do in the rx-path?
-+ */
-+static inline int crisv32_has_rx_work(struct crisv32_ethernet_local *np,
-+				      dma_descr_data *active)
-+{
-+	int mw;
-+	mw = (active->in_eop && np->new_rx_package);
-+	return mw;
-+}
-+
-+static void crisv32_eth_do_rx_recovery(struct net_device* dev,
-+				       struct crisv32_ethernet_local *np)
-+{
-+	unsigned long flags;
-+	static int r = 0;
-+
-+	r++;
-+
-+	/* Bring down the receiver.  */
-+	spin_lock_irqsave(&np->lock, flags);
-+	if (!np->do_rx_recovery)
-+		goto done;
-+
-+	napi_disable(&np->napi);
-+
-+	np->rx_dma_timeouts++;
-+
-+	__crisv32_eth_restart_rx_dma(dev, np);
-+
-+	np->do_rx_recovery = 0;
-+
-+	napi_enable(&np->napi);
-+  done:
-+	spin_unlock_irqrestore(&np->lock, flags);
-+
-+	WARN_ON(r != 1);
-+	r--;
-+}
-+
-+static void receive_timeout_work(struct work_struct* work)
-+{
-+	struct dma_descr_data* descr;
-+	struct dma_descr_data* descr2;
-+	struct net_device* dev = crisv32_dev[0];
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	reg_eth_r_intr intr_mask;
-+
-+	descr = &np->active_rx_desc->descr;
-+	descr2 = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data));
-+
-+	intr_mask = REG_RD(eth, np->eth_inst, r_intr);
-+
-+	if (!np->overrun_set
-+	    && !intr_mask.orun
-+	    && !descr->in_eop
-+	    && !descr2->in_eop)
-+		return;
-+
-+	crisv32_eth_do_rx_recovery(dev, np);
-+}
-+
-+static void receive_timeout(unsigned long arg)
-+{
-+	struct net_device* dev = (struct net_device*)arg;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	np->do_rx_recovery++;
-+	schedule_work(&np->receive_work);
-+	mod_timer(&np->receive_timer, jiffies + 1*HZ);
-+}
-+
-+static void transmit_timeout(unsigned long arg)
-+{
-+	struct net_device* dev = (struct net_device*)arg;
-+	crisv32_eth_do_tx_recovery(dev);
-+}
-+
-+/*
-+ * NAPI poll
-+ *
-+ * We are allowed to pull up to budget number of frames from the rx ring.
-+ * If we are done, remove us from the poll list and re-enable rx interrupts.
-+ * Always return number of pulled frames from the rx ring.
-+ */
-+static int crisv32_eth_poll(struct napi_struct *napi, int budget)
-+{
-+	struct crisv32_ethernet_local *np;
-+	int work_done = 0;
-+	int morework;
-+	int rx_bytes = 0;
-+	reg_dma_rw_ack_intr ack_intr = {0};
-+
-+	np = container_of(napi, struct crisv32_ethernet_local, napi);
-+	crisv32_disable_eth_ints(np);
-+	np->napi_processing = 1;
-+	ack_intr.in_eop = 1;
-+
-+	if (np->new_rx_package == 0) {
-+		/*
-+		 * In the previous round we pulled a packet from the ring but
-+		 * we didn't advance the ring due to hw DMA bug. Try to do it
-+		 * now.
-+		 */
-+		np->new_rx_package = 1;
-+		crisv32_eth_rx_ring_advance(np);
-+	}
-+
-+	morework = crisv32_has_rx_work(np, &np->active_rx_desc->descr);
-+
-+	/* See if tx needs attention.  */
-+	crisv32_tx_complete(np);
-+
-+	while (morework)
-+	{
-+		rx_bytes += crisv32_eth_receive_packet(np->dev);
-+		work_done++;
-+
-+		/* Ack irq and restart rx dma */
-+		REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+		DMA_CONTINUE_DATA(np->dma_in_inst);
-+
-+		if (unlikely(work_done >= budget))
-+			break;
-+
-+		/* See if tx needs attention.  */
-+		crisv32_tx_complete(np);
-+
-+		morework = crisv32_has_rx_work(np, &np->active_rx_desc->descr);
-+	}
-+	crisv32_enable_eth_ints(np);
-+
-+	if (!morework) {
-+		np->napi_processing = 0;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+		if (np->pending_overrun) {
-+			crisv32_eth_restart_rx_dma(np->dev, np);
-+		}
-+#endif
-+		if (irqs_disabled())
-+			printk("WARNING: %s irqs disabled!\n", __func__);
-+
-+		if (work_done < budget) {
-+			/* first mark as done, then enable irq's */
-+			napi_complete(napi);
-+			crisv32_enable_rx_ints(np);
-+			crisv32_enable_tx_ints(np);
-+		}
-+	}
-+	np->napi_processing = 0;
-+
-+	np->stats.rx_bytes += rx_bytes;
-+	np->stats.rx_packets += work_done;
-+	update_rx_stats(np);
-+	return work_done;
-+}
-+
-+/*
-+ * This function (i.e. hard_start_xmit) is protected from concurent calls by a
-+ * spinlock (xmit_lock) in the net_device structure.
-+ */
-+static int
-+crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	unsigned char *buf = skb->data;
-+	unsigned long flags;
-+
-+	/*
-+	 * Need to disable irq to avoid updating pointer in interrupt while
-+	 * sending packets.
-+	 */
-+	spin_lock_irqsave(&np->lock, flags);
-+
-+	np->active_tx_desc->skb = skb;
-+	crisv32_eth_hw_send_packet(buf, skb->len, np);
-+
-+	dev->trans_start = jiffies;
-+
-+	/* Stop queue if full. */
-+	if (crisv32_eth_tx_ring_full(np))
-+		netif_stop_queue(dev);
-+
-+	np->txpackets++;
-+	crisv32_eth_roll_tx_timer(np);
-+	spin_unlock_irqrestore(&np->lock, flags);
-+
-+	spin_lock_irqsave(&np->leds->led_lock, flags);
-+	if (!np->leds->led_active && time_after(jiffies,
-+						np->leds->led_next_time)) {
-+		/* light the network leds depending on the current speed. */
-+		crisv32_set_network_leds(CRIS_LED_ACTIVITY, dev);
-+
-+		/* Set the earliest time we may clear the LED */
-+		np->leds->led_next_time = jiffies + NET_FLASH_TIME;
-+		np->leds->led_active = 1;
-+		np->leds->clear_led_timer.data = (unsigned long) dev;
-+		mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
-+	}
-+	spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+	return 0;
-+}
-+
-+
-+static void
-+crisv32_eth_hw_send_packet(unsigned char *buf, int length, void *priv)
-+{
-+	struct crisv32_ethernet_local *np =
-+		(struct crisv32_ethernet_local *) priv;
-+
-+	/* Configure the tx dma descriptor. */
-+	np->active_tx_desc->descr.buf = (unsigned char *)virt_to_phys(buf);
-+
-+	np->active_tx_desc->descr.after = np->active_tx_desc->descr.buf +
-+		length;
-+	np->active_tx_desc->descr.intr = 1;
-+	np->active_tx_desc->descr.out_eop = 1;
-+
-+	/* Move eol. */
-+	np->active_tx_desc->descr.eol = 1;
-+	flush_dma_descr(&np->active_tx_desc->descr, 1);
-+
-+	if (np->sender_started)
-+		WARN_ON(!np->prev_tx_desc->descr.eol);
-+	np->prev_tx_desc->descr.eol = 0;
-+	flush_dma_descr(&np->prev_tx_desc->descr, 0);
-+
-+	/* Update pointers. */
-+	np->prev_tx_desc = np->active_tx_desc;
-+	np->active_tx_desc = phys_to_virt((int)np->active_tx_desc->descr.next);
-+
-+	/* Start DMA. */
-+	crisv32_start_dma_out(np);
-+}
-+
-+static void crisv32_start_dma_out(struct crisv32_ethernet_local *np)
-+{
-+	if (!np->sender_started) {
-+		/* Start DMA for the first time. */
-+		np->ctxt_out.saved_data =
-+			(void *)virt_to_phys(&np->prev_tx_desc->descr);
-+		np->ctxt_out.saved_data_buf = np->prev_tx_desc->descr.buf;
-+		WARN_ON(!np->ctxt_out.saved_data_buf);
-+
-+		cris_flush_cache_range(&np->ctxt_out, sizeof np->ctxt_out);
-+		REG_WR(dma, np->dma_out_inst, rw_group_down,
-+		       (int) virt_to_phys(&np->ctxt_out));
-+		DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+		DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
-+		np->sender_started = 1;
-+	} else {
-+		DMA_CONTINUE_DATA(np->dma_out_inst);
-+	}
-+}
-+
-+/*
-+ * Bring the transmitter back to life.
-+ */
-+static void
-+crisv32_eth_do_tx_recovery(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	reg_eth_rw_clr_err clr_err;
-+	reg_dma_rw_stat stat = {0};
-+	unsigned long flags;
-+	/* ACK urun and exc_col.  */
-+	int ack_intr = 0x1800;
-+	int do_full;
-+
-+	/* Give the tx recovery some time without link state polling.  */
-+	if (!np->fixed_phy)
-+		mod_timer(&np->speed_timer, jiffies + 4 * HZ);
-+
-+	np->tx_dma_restarts++;
-+
-+	spin_lock_irqsave(&np->lock, flags);
-+
-+	do_full = 1;
-+	update_tx_stats(np);
-+
-+	/* Cancel ongoing frame.  */
-+	crisv32_eth_tx_cancel_frame(np);
-+
-+	/* In case TR 125 just hit us.  */
-+	DMA_WR_CMD(np->dma_out_inst, regk_dma_ack_pkt);
-+	dma_wait_busy(np->dma_out_inst, 100);
-+
-+	/* At this point, the transmit block should be idle or waiting for us
-+	   to clear the excessive collision error. Let's reset the DMA.  */
-+	DMA_STOP(np->dma_out_inst);
-+
-+	crisv32_disconnect_eth_tx_dma(np);
-+
-+	/* Eat from the tx ring.  */
-+	_crisv32_tx_ring_advance(np, 1);
-+	np->do_tx_recovery++;
-+
-+	DMA_RESET(np->dma_out_inst);
-+	do {
-+		stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+	} while (stat.mode != regk_dma_rst);
-+
-+	/* Next packet will restart output DMA. */
-+	np->sender_started = 0;
-+
-+	crisv32_enable_tx_ints(np);
-+
-+	DMA_ENABLE(np->dma_out_inst);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4);
-+#endif
-+	DMA_CONTINUE(np->dma_out_inst);
-+
-+	/* Clear pending errors.  */
-+	REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr);
-+	clr_err.clr = 1;
-+	REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+
-+	/* Do a full reset of the MAC block.  */
-+	if (do_full) {
-+		np->tx_mac_resets++;
-+		crisv32_eth_reset(np);
-+	}
-+
-+	crisv32_connect_eth_tx_dma(np);
-+
-+	if (np->txpackets) {
-+		WARN_ON(!np->catch_tx_desc->skb);
-+		np->catch_tx_desc->descr.intr = 1;
-+		np->catch_tx_desc->descr.out_eop = 1;
-+
-+		/* Start DMA for the first time. */
-+		np->ctxt_out.saved_data =
-+			(void *)virt_to_phys(&np->catch_tx_desc->descr);
-+		np->ctxt_out.saved_data_buf = np->catch_tx_desc->descr.buf;
-+		WARN_ON(!np->ctxt_out.saved_data_buf);
-+		flush_dma_descr(&np->catch_tx_desc->descr, 0);
-+		cris_flush_cache_range(&np->ctxt_out, sizeof np->ctxt_out);
-+
-+		REG_WR(dma, np->dma_out_inst, rw_group_down,
-+		       (int) virt_to_phys(&np->ctxt_out));
-+		DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+		DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
-+		crisv32_eth_roll_tx_timer(np);
-+		np->sender_started = 1;
-+	}
-+
-+	if (np->txpackets && crisv32_eth_tx_ring_full(np))
-+		netif_stop_queue(dev);
-+	else
-+		netif_wake_queue(dev);
-+
-+	spin_unlock_irqrestore(&np->lock, flags);
-+}
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * num_addrs == -1	Promiscuous mode, receive all packets
-+ * num_addrs == 0	Normal mode, clear multicast list
-+ * num_addrs > 0	Multicast mode, receive normal and MC packets,
-+ *			and do best-effort filtering.
-+ */
-+static void crisv32_eth_set_rx_mode(struct net_device *dev)
-+{
-+	int num_addr = netdev_mc_count(dev);
-+	unsigned long int lo_bits;
-+	unsigned long int hi_bits;
-+	reg_eth_rw_rec_ctrl rec_ctrl = {0};
-+	reg_eth_rw_ga_lo ga_lo = {0};
-+	reg_eth_rw_ga_hi ga_hi = {0};
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	if (dev->flags & IFF_PROMISC) {
-+		/* Promiscuous mode. */
-+		lo_bits = 0xfffffffful;
-+		hi_bits = 0xfffffffful;
-+
-+		/* Enable individual receive. */
-+		rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
-+							rw_rec_ctrl);
-+		rec_ctrl.individual = regk_eth_yes;
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+	} else if (dev->flags & IFF_ALLMULTI) {
-+		/* Enable all multicasts. */
-+		lo_bits = 0xfffffffful;
-+		hi_bits = 0xfffffffful;
-+
-+		/* Disable individual receive */
-+		rec_ctrl =
-+		  (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+		rec_ctrl.individual = regk_eth_no;
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+	} else if (num_addr == 0) {
-+		/* Normal, clear the mc list. */
-+		lo_bits = 0x00000000ul;
-+		hi_bits = 0x00000000ul;
-+
-+		/* Disable individual receive */
-+		rec_ctrl =
-+		  (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+		rec_ctrl.individual = regk_eth_no;
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+	} else {
-+		/* MC mode, receive normal and MC packets. */
-+		char hash_ix;
-+		struct netdev_hw_addr *ha;
-+		char *baddr;
-+		lo_bits = 0x00000000ul;
-+		hi_bits = 0x00000000ul;
-+
-+		netdev_for_each_mc_addr(ha, dev) {
-+			/* Calculate the hash index for the GA registers. */
-+			hash_ix = 0;
-+			baddr = ha->addr;
-+			hash_ix ^= (*baddr) & 0x3f;
-+			hash_ix ^= ((*baddr) >> 6) & 0x03;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 2) & 0x03c;
-+			hash_ix ^= ((*baddr) >> 4) & 0xf;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 4) & 0x30;
-+			hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+			++baddr;
-+			hash_ix ^= (*baddr) & 0x3f;
-+			hash_ix ^= ((*baddr) >> 6) & 0x03;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 2) & 0x03c;
-+			hash_ix ^= ((*baddr) >> 4) & 0xf;
-+			++baddr;
-+			hash_ix ^= ((*baddr) << 4) & 0x30;
-+			hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+
-+			hash_ix &= 0x3f;
-+
-+			if (hash_ix > 32)
-+				hi_bits |= (1 << (hash_ix - 32));
-+			else
-+				lo_bits |= (1 << hash_ix);
-+		}
-+
-+		/* Disable individual receive. */
-+		rec_ctrl =
-+		  (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+		rec_ctrl.individual = regk_eth_no;
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+	}
-+
-+	ga_lo.table = (unsigned int) lo_bits;
-+	ga_hi.table = (unsigned int) hi_bits;
-+
-+	REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
-+	REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
-+}
-+
-+static int
-+crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+	struct mii_ioctl_data *data = if_mii(ifr);
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	int old_autoneg;
-+	int rc = 0;
-+
-+	spin_lock(&np->lock); /* Preempt protection */
-+	switch (cmd) {
-+		case SET_ETH_ENABLE_LEDS:
-+			np->use_leds = 1;
-+			break;
-+		case SET_ETH_DISABLE_LEDS:
-+			np->use_leds = 0;
-+			break;
-+		case SET_ETH_AUTONEG:
-+			old_autoneg = np->autoneg_normal;
-+			np->autoneg_normal = *(int*)data;
-+			if (np->autoneg_normal != old_autoneg)
-+				crisv32_eth_negotiate(dev);
-+			break;
-+		default:
-+			rc = generic_mii_ioctl(&np->mii_if,
-+					       if_mii(ifr), cmd, NULL);
-+			break;
-+	}
-+	spin_unlock(&np->lock);
-+	return rc;
-+}
-+
-+static int crisv32_eth_get_settings(struct net_device *dev,
-+				    struct ethtool_cmd *cmd)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	int err;
-+
-+	spin_lock_irq(&np->lock);
-+	err = mii_ethtool_gset(&np->mii_if, cmd);
-+	spin_unlock_irq(&np->lock);
-+
-+	/* The PHY may support 1000baseT, but the EtraxFS does not.  */
-+	cmd->supported &= ~(SUPPORTED_1000baseT_Half
-+			    | SUPPORTED_1000baseT_Full);
-+	return err;
-+}
-+
-+static int crisv32_eth_set_settings(struct net_device *dev,
-+				    struct ethtool_cmd *ecmd)
-+{
-+	if (ecmd->autoneg == AUTONEG_ENABLE) {
-+		crisv32_eth_set_duplex(dev, autoneg);
-+		crisv32_eth_set_speed(dev, 0);
-+	} else {
-+		crisv32_eth_set_duplex(dev, ecmd->duplex);
-+		crisv32_eth_set_speed(dev, ecmd->speed);
-+	}
-+
-+	return 0;
-+}
-+
-+static void crisv32_eth_get_drvinfo(struct net_device *dev,
-+				    struct ethtool_drvinfo *info)
-+{
-+#ifdef CONFIG_ETRAXFS
-+	strncpy(info->driver, "ETRAX FS", sizeof(info->driver) - 1);
-+#else
-+	strncpy(info->driver, "ARTPEC-3", sizeof(info->driver) - 1);
-+#endif
-+	strncpy(info->version, "$Revision: 1.197 $", sizeof(info->version) - 1);
-+	strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1);
-+	strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1);
-+}
-+
-+static int crisv32_eth_get_ethtool_sset_count(struct net_device *dev,
-+					      int stringset)
-+{
-+	if (stringset != ETH_SS_STATS)
-+		return -EINVAL;
-+
-+	return ARRAY_SIZE(ethtool_stats_keys);
-+}
-+
-+static void crisv32_eth_get_ethtool_stats(struct net_device *dev,
-+					  struct ethtool_stats *stats,
-+					  u64 *data)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data[0] = np->tx_dma_restarts;
-+	data[1] = np->tx_mac_resets;
-+	data[2] = np->rx_dma_restarts;
-+	data[3] = np->rx_dma_timeouts;
-+	data[4] = np->rx_restarts_dropped;
-+}
-+
-+static void crisv32_eth_get_strings(struct net_device *dev,
-+				    u32 stringset, u8 *data)
-+{
-+	switch (stringset) {
-+		case ETH_SS_STATS:
-+			memcpy(data, &ethtool_stats_keys,
-+			       sizeof(ethtool_stats_keys));
-+			break;
-+		default:
-+			WARN_ON(1);
-+			break;
-+	}
-+}
-+
-+static int crisv32_eth_nway_reset(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	if (np->current_duplex == autoneg && np->current_speed_selection == 0)
-+		crisv32_eth_negotiate(dev);
-+	return 0;
-+}
-+/* The FS/A3 ethernet block has 23 32-bit config registers.  */
-+/* plus 2 dma_descr_context */
-+/* plus 2 sets of ring pointers (active, prev, last) */
-+/* plus 2 sets of DMA registers 40*4 bytes = 0xA0 */
-+#define ETRAX_ETH_REGDUMP_LEN (23 * 4 + 2 * sizeof (dma_descr_context) + 2*3*4 + 2*0xA0)
-+static int crisv32_eth_get_regs_len(struct net_device *dev)
-+{
-+	return ETRAX_ETH_REGDUMP_LEN;
-+}
-+
-+static void crisv32_eth_get_regs(struct net_device *dev,
-+				 struct ethtool_regs *regs, void *_p)
-+{
-+	u32 *p = _p;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	int i;
-+
-+	/* Let's call this major version 0, minor version 1 with some
-+	 * undecided field separation in the version data.  Previously
-+	 * only the eth regs were dumped (version=0: maj 0, min 0).*/
-+	regs->version = 1;
-+	memset(p, 0, ETRAX_ETH_REGDUMP_LEN);
-+
-+#define GET_REG32_LOOP(base, len)				\
-+	do {							\
-+		for (i = 0; i < len; i += 4)			\
-+			*(p)++ = REG_READ(u32, (base) + i);	\
-+	 } while (0)
-+
-+	GET_REG32_LOOP(np->eth_inst, 0x30);
-+	/* Do not dump registers with read side effects.  */
-+	GET_REG32_LOOP(np->eth_inst + 0x34, 1);
-+	GET_REG32_LOOP(np->eth_inst + 0x3c, 1);
-+	GET_REG32_LOOP(np->eth_inst + 0x44, 0x5c - 0x44);
-+
-+
-+	memcpy(p, &np->ctxt_out, sizeof (dma_descr_context));
-+	p += sizeof (dma_descr_context)/4;
-+	*(p++) = (u32) np->active_tx_desc;
-+	*(p++) = (u32) np->prev_tx_desc;
-+	*(p++) = (u32) np->catch_tx_desc;
-+
-+	GET_REG32_LOOP(np->dma_out_inst, 0xa0);
-+
-+	memcpy(p, &np->ctxt_in, sizeof (dma_descr_context));
-+	p += sizeof (dma_descr_context)/4;
-+	*(p++) = (u32)np->active_rx_desc;
-+	*(p++) = (u32)np->prev_rx_desc;
-+	*(p++) = (u32)np->last_rx_desc;
-+
-+	GET_REG32_LOOP(np->dma_in_inst, 0xa0);
-+#undef GET_REG32_LOOP
-+}
-+
-+static struct ethtool_ops crisv32_ethtool_ops = {
-+	.get_settings		= crisv32_eth_get_settings,
-+	.set_settings		= crisv32_eth_set_settings,
-+	.get_drvinfo		= crisv32_eth_get_drvinfo,
-+	.get_regs_len		= crisv32_eth_get_regs_len,
-+	.get_regs		= crisv32_eth_get_regs,
-+	.nway_reset		= crisv32_eth_nway_reset,
-+	.get_link		= ethtool_op_get_link,
-+	.get_strings		= crisv32_eth_get_strings,
-+	.get_ethtool_stats	= crisv32_eth_get_ethtool_stats,
-+	.get_sset_count		= crisv32_eth_get_ethtool_sset_count
-+};
-+
-+/* Is this function really needed? Use ethtool instead? */
-+static int crisv32_eth_set_config(struct net_device *dev, struct ifmap *map)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->lock); /* Preempt protection */
-+
-+	switch (map->port) {
-+		case IF_PORT_UNKNOWN:
-+			/* Use autoneg */
-+			crisv32_eth_set_speed(dev, 0);
-+			crisv32_eth_set_duplex(dev, autoneg);
-+			break;
-+		case IF_PORT_10BASET:
-+			crisv32_eth_set_speed(dev, 10);
-+			crisv32_eth_set_duplex(dev, autoneg);
-+			break;
-+		case IF_PORT_100BASET:
-+		case IF_PORT_100BASETX:
-+			crisv32_eth_set_speed(dev, 100);
-+			crisv32_eth_set_duplex(dev, autoneg);
-+			break;
-+		case IF_PORT_100BASEFX:
-+		case IF_PORT_10BASE2:
-+		case IF_PORT_AUI:
-+			spin_unlock(&np->lock);
-+			return -EOPNOTSUPP;
-+			break;
-+		default:
-+			printk(KERN_ERR "%s: Invalid media selected",
-+			       dev->name);
-+			spin_unlock(&np->lock);
-+			return -EINVAL;
-+	}
-+	spin_unlock(&np->lock);
-+	return 0;
-+}
-+
-+static void crisv32_eth_negotiate(struct net_device *dev)
-+{
-+	unsigned short data;
-+	unsigned short ctrl1000;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+	ctrl1000 = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					    MII_CTRL1000);
-+
-+	/* Make all capabilities available */
-+	data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-+		ADVERTISE_100HALF | ADVERTISE_100FULL;
-+	ctrl1000 |= ADVERTISE_1000HALF | ADVERTISE_1000FULL;
-+
-+	/* Remove the speed capabilities that we that do not want */
-+	switch (np->current_speed_selection) {
-+		case 10 :
-+			data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
-+			ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+			break;
-+		case 100 :
-+			data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
-+			ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+			break;
-+		case 1000 :
-+			data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
-+				  ADVERTISE_100HALF | ADVERTISE_100FULL);
-+			break;
-+	}
-+
-+	/* Remove the duplex capabilites that we do not want */
-+	if (np->current_duplex == full) {
-+		data &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF);
-+		ctrl1000 &= ~(ADVERTISE_1000HALF);
-+	}
-+	else if (np->current_duplex == half) {
-+		data &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
-+		ctrl1000 &= ~(ADVERTISE_1000FULL);
-+	}
-+
-+	crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+				 MII_CTRL1000, ctrl1000);
-+#endif
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+	if (np->autoneg_normal) {
-+		/* Renegotiate with link partner */
-+		data |= BMCR_ANENABLE | BMCR_ANRESTART;
-+	} else {
-+		/* Don't negitiate speed or duplex */
-+		data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
-+
-+		/* Set speed and duplex static */
-+		if (np->current_speed_selection == 10) {
-+			data &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
-+		}
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+		else if (np->current_speed_selection == 1000) {
-+			data &= ~BMCR_SPEED100;
-+			data |=  BMCR_SPEED1000;
-+		}
-+#endif
-+		else {
-+			data |= BMCR_SPEED100;
-+			data &= ~BMCR_SPEED1000;
-+		}
-+
-+		if (np->current_duplex != full) {
-+			data &= ~BMCR_FULLDPLX;
-+		} else {
-+			data |= BMCR_FULLDPLX;
-+		}
-+	}
-+	crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
-+}
-+
-+static void crisv32_eth_check_speed(unsigned long idev)
-+{
-+#ifndef CONFIG_ETRAX_NO_PHY
-+	static int led_initiated = 0;
-+	struct net_device *dev = (struct net_device *) idev;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	unsigned long data;
-+	int old_speed;
-+	unsigned long flags;
-+
-+	BUG_ON(!np);
-+	BUG_ON(!np->transceiver);
-+
-+	spin_lock(&np->transceiver_lock);
-+
-+	old_speed = np->current_speed;
-+
-+	/* Do a fake read. This is needed for DM9161, otherwise the link will
-+	 * go up and down all the time.
-+	 */
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
-+
-+	if (!(data & BMSR_LSTATUS))
-+		np->current_speed = 0;
-+	else
-+		np->transceiver->check_speed(dev);
-+
-+	spin_lock_irqsave(&np->leds->led_lock, flags);
-+	if ((old_speed != np->current_speed) || !led_initiated) {
-+		led_initiated = 1;
-+		np->leds->clear_led_timer.data = (unsigned long) dev;
-+		if (np->current_speed) {
-+			if (!np->link)
-+				netif_carrier_on(dev);
-+			crisv32_set_network_leds(CRIS_LED_LINK, dev);
-+			np->link = 1;
-+		} else {
-+			if (np->link)
-+				netif_carrier_off(dev);
-+			crisv32_set_network_leds(CRIS_LED_NOLINK, dev);
-+			np->link = 0;
-+		}
-+	}
-+	spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+	/* Reinitialize the timer. */
-+	np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+	add_timer(&np->speed_timer);
-+
-+	spin_unlock(&np->transceiver_lock);
-+#endif
-+}
-+
-+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	spin_lock(&np->transceiver_lock);
-+	if (np->current_speed_selection != speed) {
-+		np->current_speed_selection = speed;
-+		crisv32_eth_negotiate(dev);
-+	}
-+	spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void crisv32_eth_check_duplex(unsigned long idev)
-+{
-+#ifndef CONFIG_ETRAX_NO_PHY
-+	struct net_device *dev = (struct net_device *) idev;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	reg_eth_rw_rec_ctrl rec_ctrl;
-+	int old_duplex = np->full_duplex;
-+
-+	np->transceiver->check_duplex(dev);
-+
-+	if (old_duplex != np->full_duplex) {
-+		/* Duplex changed. */
-+		rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
-+							rw_rec_ctrl);
-+		rec_ctrl.duplex = np->full_duplex;
-+		REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+	}
-+
-+	/* Reinitialize the timer. */
-+	np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+	add_timer(&np->duplex_timer);
-+#endif
-+}
-+
-+static void
-+crisv32_eth_set_duplex(struct net_device *dev, enum duplex new_duplex)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	spin_lock(&np->transceiver_lock);
-+	if (np->current_duplex != new_duplex) {
-+		np->current_duplex = new_duplex;
-+		crisv32_eth_negotiate(dev);
-+	}
-+	spin_unlock(&np->transceiver_lock);
-+}
-+
-+static int crisv32_eth_probe_transceiver(struct net_device *dev)
-+{
-+#ifndef CONFIG_ETRAX_NO_PHY
-+	unsigned int phyid_high;
-+	unsigned int phyid_low;
-+	unsigned int oui;
-+	struct transceiver_ops *ops = NULL;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	/* Probe MDIO physical address. */
-+	for (np->mii_if.phy_id = 0;
-+	     np->mii_if.phy_id <= 31; np->mii_if.phy_id++) {
-+		if (crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR)
-+		    != 0xffff)
-+			break;
-+	}
-+
-+	if (np->mii_if.phy_id == 32)
-+		return -ENODEV;
-+
-+	/* Get manufacturer. */
-+	phyid_high = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					      MII_PHYSID1);
-+	phyid_low = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					     MII_PHYSID2);
-+
-+	oui = (phyid_high << 6) | (phyid_low >> 10);
-+
-+	for (ops = &transceivers[0]; ops->oui; ops++) {
-+		if (ops->oui == oui)
-+			break;
-+	}
-+
-+	np->transceiver = ops;
-+
-+	if (oui == DM9161_OUI) {
-+		/* Do not bypass the scrambler/descrambler, this is needed
-+		 * to make 10Mbit work.
-+		 */
-+		crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+					 MII_DM9161_SCR,MII_DM9161_SCR_INIT);
-+		/* Clear 10BTCSR to default */
-+		crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+					 MII_DM9161_10BTCSR,
-+					 MII_DM9161_10BTCSR_INIT);
-+	}
-+	return 0;
-+#else
-+	return -ENODEV;
-+#endif
-+}
-+
-+#ifndef CONFIG_ETRAX_NO_PHY
-+static void generic_check_speed(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+	if ((data & ADVERTISE_100FULL) ||
-+	    (data & ADVERTISE_100HALF))
-+		np->current_speed = 100;
-+	else
-+		np->current_speed = 10;
-+}
-+
-+static void generic_check_duplex(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+	if ((data & ADVERTISE_10FULL) ||
-+	    (data & ADVERTISE_100FULL))
-+		np->full_duplex = 1;
-+	else
-+		np->full_duplex = 0;
-+}
-+
-+static void broadcom_check_speed(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_AUX_CTRL_STATUS_REG);
-+	np->current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
-+}
-+
-+static void broadcom_check_duplex(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_AUX_CTRL_STATUS_REG);
-+	np->full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void tdk_check_speed(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_TDK_DIAGNOSTIC_REG);
-+	np->current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
-+}
-+
-+static void tdk_check_duplex(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_TDK_DIAGNOSTIC_REG);
-+	np->full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
-+
-+}
-+
-+static void intel_check_speed(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_INT_STATUS_REG_2);
-+	np->current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
-+}
-+
-+static void intel_check_duplex(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_INT_STATUS_REG_2);
-+	np->full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void national_check_speed(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_NAT_LINK_AN_REG);
-+	if (data & MDIO_NAT_1000)
-+		np->current_speed = 1000;
-+	else if (data & MDIO_NAT_100)
-+		np->current_speed = 100;
-+	else
-+		np->current_speed = 10;
-+}
-+
-+static void national_check_duplex(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_NAT_LINK_AN_REG);
-+	if (data & MDIO_NAT_FULL_DUPLEX_IND)
-+		np->full_duplex = 1;
-+	else
-+		np->full_duplex = 0;
-+}
-+
-+static void vitesse_check_speed(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_VIT_AUX_STAT);
-+	if ((data & 0x18) == MDIO_VIT_1000)
-+		np->current_speed = 1000;
-+	else if ((data & 0x18) == MDIO_VIT_100)
-+		np->current_speed = 100;
-+	else
-+		np->current_speed = 10;
-+}
-+
-+static void vitesse_check_duplex(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+					MDIO_VIT_AUX_STAT);
-+	if (data & 0x20)
-+		np->full_duplex = 1;
-+	else
-+		np->full_duplex = 0;
-+}
-+
-+static void davicom_check_speed(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+	np->current_speed = (data & BMCR_SPEED100) ? 100 : 10;
-+}
-+
-+static void davicom_check_duplex(struct net_device *dev)
-+{
-+	unsigned long data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+	np->full_duplex = (data & BMCR_FULLDPLX) ? 1 : 0;
-+}
-+#endif
-+
-+#if 0
-+static void crisv32_eth_reset_tranceiver(struct net_device *dev)
-+{
-+	int i;
-+	unsigned short cmd;
-+	unsigned short data;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+
-+	cmd = (MDIO_START << 14)
-+		| (MDIO_WRITE << 12)
-+		| (np->mii_if.phy_id << 7)
-+		| (MII_BMCR << 2);
-+
-+	crisv32_eth_send_mdio_cmd(dev, cmd, 1);
-+
-+	data |= 0x8000;
-+
-+	/* Magic value is number of bits. */
-+	for (i = 15; i >= 0; i--)
-+		crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
-+}
-+#endif
-+
-+static int
-+crisv32_eth_get_mdio_reg(struct net_device *dev, int phyid, int reg_num)
-+{
-+	int i;
-+	unsigned short cmd;	/* Data to be sent on MDIO port. */
-+	unsigned short data;	/* Data read from MDIO. */
-+
-+#ifdef CONFIG_ETRAX_NO_PHY
-+	return 0;
-+#endif
-+
-+	/* Start of frame, OP Code, Physical Address, Register Address. */
-+	cmd = (MDIO_START << 14)
-+		| (MDIO_READ << 12)
-+		| (phyid << 7)
-+		| (reg_num << 2);
-+
-+	crisv32_eth_send_mdio_cmd(dev, cmd, 0);
-+
-+	data = 0;
-+
-+	/* Receive data. Magic value is number of bits. */
-+	for (i = 15; i >= 0; i--)
-+		data |= (crisv32_eth_receive_mdio_bit(dev) << i);
-+
-+	return data;
-+}
-+
-+static void
-+crisv32_eth_set_mdio_reg(struct net_device *dev, int phyid, int reg, int value)
-+{
-+	int bitCounter;
-+	unsigned short cmd;
-+
-+#ifdef CONFIG_ETRAX_NO_PHY
-+	return;
-+#endif
-+	cmd = (MDIO_START << 14)
-+		| (MDIO_WRITE << 12)
-+		| (phyid << 7)
-+		| (reg << 2);
-+
-+	crisv32_eth_send_mdio_cmd(dev, cmd, 1);
-+
-+	/* Data... */
-+	for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
-+		crisv32_eth_send_mdio_bit(dev, GET_BIT(bitCounter, value));
-+	}
-+}
-+
-+static void
-+crisv32_eth_send_mdio_cmd(struct net_device *dev, unsigned short cmd,
-+			  int write_cmd)
-+{
-+	int i;
-+	unsigned char data = 0x2;
-+
-+	/* Preamble. Magic value is number of bits. */
-+	for (i = 31; i >= 0; i--)
-+		crisv32_eth_send_mdio_bit(dev, GET_BIT(i, MDIO_PREAMBLE));
-+
-+	for (i = 15; i >= 2; i--)
-+		crisv32_eth_send_mdio_bit(dev, GET_BIT(i, cmd));
-+
-+	/* Turnaround. */
-+	for (i = 1; i >= 0; i--)
-+		if (write_cmd)
-+			crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
-+		else
-+			crisv32_eth_receive_mdio_bit(dev);
-+}
-+
-+static void crisv32_eth_send_mdio_bit(struct net_device *dev, unsigned char bit)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	reg_eth_rw_mgm_ctrl mgm_ctrl = {
-+		.mdoe = regk_eth_yes,
-+		.mdio = bit & 1
-+	};
-+
-+	REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+	udelay(1);
-+
-+	mgm_ctrl.mdc = 1;
-+	REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+	udelay(1);
-+}
-+
-+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev)
-+{
-+	reg_eth_r_stat stat;
-+	reg_eth_rw_mgm_ctrl mgm_ctrl = {0};
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+	REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+	stat = REG_RD(eth, np->eth_inst, r_stat);
-+
-+	udelay(1);
-+
-+	mgm_ctrl.mdc = 1;
-+	REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+	udelay(1);
-+	return stat.mdio;
-+}
-+
-+static void crisv32_clear_network_leds(unsigned long priv)
-+{
-+	struct net_device *dev = (struct net_device *)priv;
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&np->leds->led_lock, flags);
-+	if (np->leds->led_active && time_after(jiffies,
-+					       np->leds->led_next_time)) {
-+		crisv32_set_network_leds(CRIS_LED_NOACTIVITY, dev);
-+
-+		/* Set the earliest time we may set the LED */
-+		np->leds->led_next_time = jiffies + NET_FLASH_PAUSE;
-+		np->leds->led_active = 0;
-+	}
-+	spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+}
-+
-+static void crisv32_set_network_leds(int active, struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	int light_leds = 0;
-+
-+	if (np->leds->ledgrp == CRIS_LED_GRP_NONE)
-+		return;
-+
-+	if (!np->use_leds)
-+		return;
-+
-+	if (active == CRIS_LED_NOLINK) {
-+		if (dev == crisv32_dev[0])
-+			np->leds->ifisup[0] = 0;
-+		else
-+			np->leds->ifisup[1] = 0;
-+	}
-+	else if (active == CRIS_LED_LINK) {
-+		if (dev == crisv32_dev[0])
-+			np->leds->ifisup[0] = 1;
-+		else
-+			np->leds->ifisup[1] = 1;
-+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
-+		light_leds = 1;
-+	} else {
-+		light_leds = (active == CRIS_LED_NOACTIVITY);
-+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
-+		light_leds = 0;
-+	} else {
-+		light_leds = (active == CRIS_LED_ACTIVITY);
-+#else
-+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
-+#endif
-+	}
-+
-+	if (!np->current_speed) {
-+		/* Set link down if none of the interfaces that use this led
-+		   group is up */
-+		if ((np->leds->ifisup[0] + np->leds->ifisup[1]) == 0) {
-+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
-+			/* Make LED red, link is down */
-+			NET_LED_SET(np->leds->ledgrp, CRIS_LED_RED);
-+#else
-+			NET_LED_SET(np->leds->ledgrp, CRIS_LED_OFF);
-+#endif
-+		}
-+	} else if (light_leds) {
-+		if (np->current_speed == 10)
-+			NET_LED_SET(np->leds->ledgrp, CRIS_LED_ORANGE);
-+		else
-+			NET_LED_SET(np->leds->ledgrp, CRIS_LED_GREEN);
-+	} else
-+		NET_LED_SET(np->leds->ledgrp, CRIS_LED_OFF);
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void crisv32_netpoll(struct net_device *netdev)
-+{
-+	crisv32rx_eth_interrupt(DMA0_INTR_VECT, netdev);
-+}
-+#endif
-+
-+#ifdef CONFIG_CPU_FREQ
-+static int crisv32_ethernet_freq_notifier(struct notifier_block *nb,
-+					  unsigned long val, void *data)
-+{
-+	struct cpufreq_freqs *freqs = data;
-+	int i;
-+	if (val != CPUFREQ_POSTCHANGE)
-+		return 0;
-+
-+	for (i = 0; i < 2; i++) {
-+		struct net_device *dev = crisv32_dev[i];
-+		unsigned short data;
-+		if (dev == NULL)
-+			continue;
-+
-+		data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+				MII_BMCR);
-+		if (freqs->new == 200000)
-+			data &= ~BMCR_PDOWN;
-+		else
-+			data |= BMCR_PDOWN;
-+		crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+				MII_BMCR, data);
-+	}
-+	return 0;
-+}
-+#endif
-+
-+#if 0
-+/*
-+ * Must be called with the np->lock held.
-+ */
-+static void crisv32_ethernet_bug(struct net_device *dev)
-+{
-+	struct crisv32_ethernet_local *np = netdev_priv(dev);
-+	dma_descr_data *dma_pos;
-+	dma_descr_data *in_dma_pos;
-+	reg_dma_rw_stat stat = {0};
-+	reg_dma_rw_stat in_stat = {0};
-+	int i;
-+
-+	/* Get the current output dma position. */
-+	stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+
-+	dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data));
-+	in_dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data));
-+	in_stat = REG_RD(dma, np->dma_in_inst, rw_stat);
-+
-+	printk("%s:\n"
-+	       "stat.list_state=%x\n"
-+	       "stat.mode=%x\n"
-+	       "stat.stream_cmd_src=%x\n"
-+	       "dma_pos=%x\n"
-+	       "tx catch=%x active=%x\n"
-+	       "packets=%d queue=%d sender_started=%d\n"
-+	       "intr_vect.r_vect=%x\n"
-+	       "dma.r_masked_intr=%x dma.rw_ack_intr=%x "
-+	       "dma.r_intr=%x dma.rw_intr_masked=%x\n"
-+	       "eth.r_stat=%x\n",
-+	       __func__,
-+	       stat.list_state, stat.mode, stat.stream_cmd_src,
-+	       (unsigned int)dma_pos,
-+	       (unsigned int)&np->catch_tx_desc->descr,
-+	       (unsigned int)&np->active_tx_desc->descr,
-+	       np->txpackets,
-+	       netif_queue_stopped(dev), np->sender_started,
-+	       REG_RD_INT(intr_vect, regi_irq, r_vect),
-+	       REG_RD_INT(dma, np->dma_out_inst, r_masked_intr),
-+	       REG_RD_INT(dma, np->dma_out_inst, rw_ack_intr),
-+	       REG_RD_INT(dma, np->dma_out_inst, r_intr),
-+	       REG_RD_INT(dma, np->dma_out_inst, rw_intr_mask),
-+	       REG_RD_INT(eth, np->eth_inst, r_stat));
-+
-+	printk("in_stat.list_state=%x\n"
-+	       "in_stat.mode=%x\n"
-+	       "in_stat.stream_cmd_src=%x\n"
-+	       "in_dma_pos=%x\n"
-+	       "rx last=%x prev=%x active=%x\n",
-+	       in_stat.list_state, in_stat.mode, in_stat.stream_cmd_src,
-+	       (unsigned int)in_dma_pos,
-+	       (unsigned int)&np->last_rx_desc->descr,
-+	       (unsigned int)&np->prev_rx_desc->descr,
-+	       (unsigned int)&np->active_rx_desc->descr);
-+
-+#if 0
-+	printk("rx-descriptors:\n");
-+	for (i = 0; i < NBR_RX_DESC; i++) {
-+		printk("rxdesc[%d]=0x%x\n", i, (unsigned int)
-+		       virt_to_phys(&np->dma_rx_descr_list[i].descr));
-+		printk("rxdesc[%d].skb=0x%x\n", i,
-+		       (unsigned int)np->dma_rx_descr_list[i].skb);
-+		printk("rxdesc[%d].buf=0x%x\n", i,
-+		       (unsigned int)np->dma_rx_descr_list[i].descr.buf);
-+		printk("rxdesc[%d].after=0x%x\n", i,
-+		       (unsigned int)np->dma_rx_descr_list[i].descr.after);
-+		printk("rxdesc[%d].intr=%x\n", i,
-+		       np->dma_rx_descr_list[i].descr.intr);
-+		printk("rxdesc[%d].eol=%x\n", i,
-+		       np->dma_rx_descr_list[i].descr.eol);
-+		printk("rxdesc[%d].out_eop=%x\n", i,
-+		       np->dma_rx_descr_list[i].descr.out_eop);
-+		printk("rxdesc[%d].in_eop=%x\n", i,
-+		       np->dma_rx_descr_list[i].descr.in_eop);
-+		printk("rxdesc[%d].wait=%x\n", i,
-+		       np->dma_rx_descr_list[i].descr.wait);
-+	}
-+#endif
-+
-+#if 1
-+	printk("tx-descriptors:\n");
-+	for (i = 0; i < NBR_TX_DESC; i++) {
-+		printk("txdesc[%d]=0x%x\n", i, (unsigned int)
-+		       virt_to_phys(&np->dma_tx_descr_list[i].descr));
-+		printk("txdesc[%d].skb=0x%x\n", i,
-+		       (unsigned int)np->dma_tx_descr_list[i].skb);
-+		printk("txdesc[%d].buf=0x%x\n", i,
-+		       (unsigned int)np->dma_tx_descr_list[i].descr.buf);
-+		printk("txdesc[%d].after=0x%x\n", i,
-+		       (unsigned int)np->dma_tx_descr_list[i].descr.after);
-+		printk("txdesc[%d].intr=%x\n", i,
-+		       np->dma_tx_descr_list[i].descr.intr);
-+		printk("txdesc[%d].eol=%x\n", i,
-+		       np->dma_tx_descr_list[i].descr.eol);
-+		printk("txdesc[%d].out_eop=%x\n", i,
-+		       np->dma_tx_descr_list[i].descr.out_eop);
-+		printk("txdesc[%d].in_eop=%x\n", i,
-+		       np->dma_tx_descr_list[i].descr.in_eop);
-+		printk("txdesc[%d].wait=%x\n", i,
-+		       np->dma_tx_descr_list[i].descr.wait);
-+	}
-+#endif
-+}
-+#endif
-+
-+static int __init crisv32_boot_setup(char *str)
-+{
-+	struct sockaddr sa = {0};
-+	int i;
-+
-+	/* Parse the colon separated Ethernet station address */
-+	for (i = 0; i <  ETH_ALEN; i++) {
-+		unsigned int tmp;
-+		if (sscanf(str + 3*i, "%2x", &tmp) != 1) {
-+			printk(KERN_WARNING "Malformed station address");
-+			return 0;
-+		}
-+		sa.sa_data[i] = (char)tmp;
-+	}
-+
-+	default_mac_iface0 = sa;
-+	return 1;
-+}
-+
-+__setup("crisv32_eth=", crisv32_boot_setup);
-+
-+module_init(crisv32_ethernet_init);
-diff --git a/drivers/net/cris/eth_v32.h b/drivers/net/cris/eth_v32.h
-new file mode 100644
-index 0000000..b6b0c7c
---- /dev/null
-+++ b/drivers/net/cris/eth_v32.h
-@@ -0,0 +1,297 @@
-+/*
-+ * Definitions for ETRAX FS ethernet driver.
-+ *
-+ * Copyright (C) 2003, 2004, 2005 Axis Communications.
-+ */
-+
-+#ifndef _ETRAX_ETHERNET_H_
-+#define _ETRAX_ETHERNET_H_
-+
-+#include <hwregs/dma.h>
-+
-+#define MAX_MEDIA_DATA_SIZE 1522	/* Max packet size. */
-+
-+#define NBR_RX_DESC 128		/* Number of RX descriptors. */
-+#define NBR_TX_DESC 16		/* Number of TX descriptors. */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+#define NBR_INTMEM_RX_DESC 16	/* Number of RX descriptors in int. mem.
-+				 * when running in gigabit mode.
-+				 * Should be less then NBR_RX_DESC
-+				 */
-+#define NBR_INTMEM_TX_BUF 4	/* Number of TX buffers in int. mem
-+				 * when running in gigabit mode.
-+				 * Should be less than NBR_TX_DESC
-+				 */
-+#endif
-+
-+/* Large packets are sent directly to upper layers while small packets
-+ * are copied (to reduce memory waste).  The following constant
-+ * decides the breakpoint.
-+ */
-+#define RX_COPYBREAK        (256)
-+
-+#define ETHER_HEAD_LEN      (14)
-+
-+/*
-+ * MDIO constants.
-+ */
-+#define MDIO_START                          0x1
-+#define MDIO_READ                           0x2
-+#define MDIO_WRITE                          0x1
-+#define MDIO_PREAMBLE              0xfffffffful
-+
-+/* Broadcom specific */
-+#define MDIO_AUX_CTRL_STATUS_REG           0x18
-+#define MDIO_BC_FULL_DUPLEX_IND             0x1
-+#define MDIO_BC_SPEED                       0x2
-+
-+/* TDK specific */
-+#define MDIO_TDK_DIAGNOSTIC_REG              18
-+#define MDIO_TDK_DIAGNOSTIC_RATE          0x400
-+#define MDIO_TDK_DIAGNOSTIC_DPLX          0x800
-+
-+/*Intel LXT972A specific*/
-+#define MDIO_INT_STATUS_REG_2		   0x0011
-+#define MDIO_INT_FULL_DUPLEX_IND ( 0x0001 << 9  )
-+#define MDIO_INT_SPEED		 ( 0x0001 << 14 )
-+
-+/*National Semiconductor DP83865 specific*/
-+#define MDIO_NAT_LINK_AN_REG              0x11
-+#define MDIO_NAT_1000            (0x0001 << 4)
-+#define MDIO_NAT_100             (0x0001 << 3)
-+#define MDIO_NAT_FULL_DUPLEX_IND (0x0001 << 1)
-+
-+/* Vitesse VCS8641 specific */
-+#define MDIO_VIT_AUX_STAT 0x1c
-+#define MDIO_VIT_1000            (0x2 << 3)
-+#define MDIO_VIT_100             (0x1 << 3)
-+#define MDIO_VIT_10              0
-+#define MDIO_VIT_FD              (0x1 << 5)
-+
-+/* Davicom DM9161 specific */
-+#define DM9161_OUI               0x606E
-+#define MII_DM9161_SCR           0x10
-+#define MII_DM9161_SCR_INIT      0x0610
-+#define MII_DM9161_SCR_RMII      0x0100
-+#define MII_DM9161_10BTCSR       0x12
-+#define MII_DM9161_10BTCSR_INIT  0x7800
-+
-+/* Network flash constants */
-+#define NET_FLASH_TIME                  (HZ/50)	/* 20 ms */
-+#define NET_FLASH_PAUSE                 (HZ/100)	/* 10 ms */
-+#define NET_LINK_UP_CHECK_INTERVAL	(2*HZ)	/* 2 seconds. */
-+#define NET_DUPLEX_CHECK_INTERVAL	(2*HZ)	/* 2 seconds. */
-+
-+/* Duplex settings. */
-+enum duplex {
-+	half,
-+	full,
-+	autoneg
-+};
-+
-+/* Some transceivers requires special handling. */
-+struct transceiver_ops {
-+	unsigned int oui;
-+	void (*check_speed) (struct net_device * dev);
-+	void (*check_duplex) (struct net_device * dev);
-+};
-+
-+typedef struct crisv32_eth_descr {
-+	dma_descr_data descr __attribute__ ((__aligned__(32)));
-+	struct sk_buff *skb;
-+	unsigned char *linearized_packet;
-+} crisv32_eth_descr;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+struct tx_buffer_list {
-+	struct tx_buffer_list *next;
-+	unsigned char *buf;
-+	char free;
-+};
-+#endif
-+
-+/* LED stuff */
-+#define CRIS_LED_GRP_0 0
-+#define CRIS_LED_GRP_1 1
-+#define CRIS_LED_GRP_NONE 2
-+
-+#define CRIS_LED_ACTIVITY   0
-+#define CRIS_LED_NOACTIVITY 1
-+#define CRIS_LED_LINK       2
-+#define CRIS_LED_NOLINK     3
-+
-+struct crisv32_eth_leds {
-+	unsigned int ledgrp;
-+	int led_active;
-+	unsigned long led_next_time;
-+	struct timer_list clear_led_timer;
-+	spinlock_t led_lock;	/* Protect LED state */
-+	int ifisup[2];
-+};
-+
-+#define NET_LED_SET(x,y)				\
-+	do {						\
-+		if (x == 0) CRIS_LED_NETWORK_GRP0_SET(y);	\
-+		if (x == 1) CRIS_LED_NETWORK_GRP1_SET(y);	\
-+	} while (0)
-+
-+/* Information that need to be kept for each device. */
-+struct crisv32_ethernet_local {
-+	/* FIXME: These align attributes don't really help. If they are really
-+	 * needed alignment has to be enforced at runtime, these objects
-+	 * are dynamically allocated.  */
-+	dma_descr_context ctxt_in __attribute__ ((__aligned__(32)));
-+	dma_descr_context ctxt_out __attribute__ ((__aligned__(32)));
-+
-+	crisv32_eth_descr dma_rx_descr_list[NBR_RX_DESC];
-+	crisv32_eth_descr dma_tx_descr_list[NBR_TX_DESC];
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+	struct tx_buffer_list tx_intmem_buf_list[NBR_INTMEM_TX_BUF];
-+	struct tx_buffer_list *intmem_tx_buf_active;
-+	struct tx_buffer_list *intmem_tx_buf_catch;
-+	int gigabit_mode;
-+#endif
-+	/* Transmit data path.  */
-+	int dma_out_inst;
-+	int sender_started;
-+
-+	/* TX-ring state.  */
-+	crisv32_eth_descr *active_tx_desc;
-+	crisv32_eth_descr *prev_tx_desc;
-+	crisv32_eth_descr *catch_tx_desc;
-+	int txpackets;
-+	int retrans;
-+	int do_tx_recovery;
-+	struct timer_list transmit_timer;
-+
-+	/* Receive data path.  */
-+	struct napi_struct napi;
-+	int dma_in_inst;
-+
-+	/* RX-ring state.  */
-+	crisv32_eth_descr *active_rx_desc;
-+	crisv32_eth_descr *prev_rx_desc;
-+	crisv32_eth_descr *last_rx_desc;
-+
-+	unsigned long newbuf;
-+	u8 new_rx_package;
-+	u8 pending_overrun;
-+	u8 overrun_set;
-+	u8 link;
-+	int napi_processing;
-+	struct timer_list receive_timer;
-+	struct work_struct receive_work;
-+	reg_eth_rw_rec_ctrl saved_rec_ctrl;
-+	int saved_ga_lo;
-+	int saved_ga_hi;
-+	int do_rx_recovery;
-+
-+	/* Control paths.  */
-+	spinlock_t lock;
-+	struct net_device *dev;
-+	int eth_inst;
-+
-+	/* Toggle network LEDs usage at runtime */
-+	int use_leds;
-+	struct crisv32_eth_leds *leds;
-+
-+	/* PHY control.  */
-+	int fixed_phy;
-+	spinlock_t transceiver_lock;	/* Protect transceiver state. */
-+	struct transceiver_ops *transceiver;
-+	struct mii_if_info mii_if;
-+
-+	/* Specifies if we should do autonegotiation or not.
-+	 * TODO: This ad-hoc hack should be removed. Ethtool already supports
-+	 *       this kind of control.
-+	 */
-+	int autoneg_normal;
-+
-+	struct timer_list duplex_timer;
-+	int full_duplex;
-+	enum duplex current_duplex;
-+
-+	struct timer_list speed_timer;
-+	int current_speed;	/* Speed read from tranceiver */
-+	int current_speed_selection;	/* Speed selected by user */
-+
-+	/* Statistics.  */
-+	u64 tx_dma_restarts;
-+	u64 tx_mac_resets;
-+	u64 rx_dma_restarts;
-+	u64 rx_dma_timeouts;
-+	u64 rx_restarts_dropped;
-+
-+	struct net_device_stats stats;
-+};
-+
-+/* Function prototypes. */
-+static int crisv32_ethernet_init(void);
-+static int crisv32_ethernet_device_init(struct net_device *dev);
-+static int crisv32_eth_open(struct net_device *dev);
-+static int crisv32_eth_close(struct net_device *dev);
-+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr);
-+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id);
-+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id);
-+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id);
-+static int crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev);
-+static void crisv32_eth_hw_send_packet(unsigned char *buf, int length,
-+				       void *priv);
-+static void crisv32_eth_do_tx_recovery(struct net_device *dev);
-+static void crisv32_eth_set_rx_mode(struct net_device *dev);
-+static int crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr,
-+			     int cmd);
-+static int crisv32_eth_set_config(struct net_device *dev, struct ifmap *map);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+static void crisv32_eth_switch_intmem_usage(struct net_device *dev);
-+#endif
-+static void crisv32_eth_negotiate(struct net_device *dev);
-+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed);
-+#ifndef CONFIG_ETRAX_NO_PHY
-+static void crisv32_eth_check_duplex(unsigned long idev);
-+static void crisv32_eth_check_speed(unsigned long idev);
-+#endif
-+
-+static void crisv32_eth_set_duplex(struct net_device *dev, enum duplex);
-+static int crisv32_eth_probe_transceiver(struct net_device *dev);
-+
-+static struct ethtool_ops crisv32_ethtool_ops;
-+
-+#ifndef CONFIG_ETRAX_NO_PHY
-+static void generic_check_speed(struct net_device *dev);
-+static void generic_check_duplex(struct net_device *dev);
-+static void broadcom_check_speed(struct net_device *dev);
-+static void broadcom_check_duplex(struct net_device *dev);
-+static void tdk_check_speed(struct net_device *dev);
-+static void tdk_check_duplex(struct net_device *dev);
-+static void intel_check_speed(struct net_device *dev);
-+static void intel_check_duplex(struct net_device *dev);
-+static void national_check_speed(struct net_device *dev);
-+static void national_check_duplex(struct net_device *dev);
-+static void vitesse_check_speed(struct net_device *dev);
-+static void vitesse_check_duplex(struct net_device *dev);
-+static void davicom_check_speed(struct net_device *dev);
-+static void davicom_check_duplex(struct net_device *dev);
-+#endif
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void crisv32_netpoll(struct net_device *dev);
-+#endif
-+
-+static void crisv32_clear_network_leds(unsigned long dummy);
-+static void crisv32_set_network_leds(int active, struct net_device *dev);
-+
-+static int crisv32_eth_get_mdio_reg(struct net_device *dev,
-+				    int phyid, int reg_num);
-+static void crisv32_eth_set_mdio_reg(struct net_device *dev,
-+				     int phyid, int reg_num, int val);
-+static void crisv32_eth_send_mdio_cmd(struct net_device *dev,
-+				      unsigned short cmd, int write_cmd);
-+static void crisv32_eth_send_mdio_bit(struct net_device *dev,
-+				      unsigned char bit);
-+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev);
-+
-+static struct net_device_stats *crisv32_get_stats(struct net_device *dev);
-+static void crisv32_start_dma_out(struct crisv32_ethernet_local *np);
-+
-+#endif /* _ETRAX_ETHERNET_H_ */