remove non-lts kernel

1 files changed, 0 insertions, 128961 deletions

diff --git a/target/arm/bcm28xx/patches/4.0.6/0001-raspberry-pi.patch b/target/arm/bcm28xx/patches/4.0.6/0001-raspberry-pi.patch
deleted file mode 100644
index 311f0e585..000000000
--- a/target/arm/bcm28xx/patches/4.0.6/0001-raspberry-pi.patch
+++ /dev/null
@@ -1,128961 +0,0 @@
-diff -Nur linux-4.0.5/Documentation/video4linux/bcm2835-v4l2.txt linux-4.0-rpi/Documentation/video4linux/bcm2835-v4l2.txt
---- linux-4.0.5/Documentation/video4linux/bcm2835-v4l2.txt	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/Documentation/video4linux/bcm2835-v4l2.txt	2015-06-23 13:23:30.742045784 +0200
-@@ -0,0 +1,60 @@
-+
-+BCM2835 (aka Raspberry Pi) V4L2 driver
-+======================================
-+
-+1. Copyright
-+============
-+
-+Copyright © 2013 Raspberry Pi (Trading) Ltd.
-+
-+2. License
-+==========
-+
-+This program is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2 of the License, or
-+(at your option) any later version.
-+
-+This program is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with this program; if not, write to the Free Software
-+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+
-+3. Quick Start
-+==============
-+
-+You need a version 1.0 or later of v4l2-ctl, available from:
-+	git://git.linuxtv.org/v4l-utils.git
-+
-+$ sudo modprobe bcm2835-v4l2
-+
-+Turn on the overlay:
-+
-+$ v4l2-ctl --overlay=1
-+
-+Turn off the overlay:
-+
-+$ v4l2-ctl --overlay=0
-+
-+Set the capture format for video:
-+
-+$ v4l2-ctl  --set-fmt-video=width=1920,height=1088,pixelformat=4
-+
-+(Note: 1088 not 1080).
-+
-+Capture:
-+
-+$ v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=somefile.h264
-+
-+Stills capture:
-+
-+$ v4l2-ctl  --set-fmt-video=width=2592,height=1944,pixelformat=3
-+$ v4l2-ctl --stream-mmap=3 --stream-count=1 --stream-to=somefile.jpg
-+
-+List of available formats:
-+
-+$ v4l2-ctl --list-formats
-diff -Nur linux-4.0.5/arch/arm/Kconfig linux-4.0-rpi/arch/arm/Kconfig
---- linux-4.0.5/arch/arm/Kconfig	2015-06-06 17:21:22.000000000 +0200
-+++ linux-4.0-rpi/arch/arm/Kconfig	2015-06-23 13:23:30.778045828 +0200
-@@ -369,6 +369,23 @@
- 	  This enables support for systems based on Atmel
- 	  AT91RM9200, AT91SAM9 and SAMA5 processors.
- 
-+config ARCH_BCM2708
-+	bool "Broadcom BCM2708 family"
-+	select CPU_V6
-+	select ARM_AMBA
-+	select HAVE_SCHED_CLOCK
-+	select NEED_MACH_GPIO_H
-+	select NEED_MACH_MEMORY_H
-+	select COMMON_CLK
-+	select ARCH_HAS_CPUFREQ
-+	select GENERIC_CLOCKEVENTS
-+	select ARM_ERRATA_411920
-+	select MACH_BCM2708
-+	select VC4
-+	select FIQ
-+	help
-+	  This enables support for Broadcom BCM2708 boards.
-+
- config ARCH_CLPS711X
- 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
- 	select ARCH_REQUIRE_GPIOLIB
-@@ -777,6 +794,26 @@
- 	help
- 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
- 
-+config ARCH_BCM2709
-+	bool "Broadcom BCM2709 family"
-+	select ARCH_HAS_BARRIERS if SMP
-+	select CPU_V7
-+	select HAVE_SMP
-+	select ARM_AMBA
-+	select MIGHT_HAVE_CACHE_L2X0
-+	select HAVE_SCHED_CLOCK
-+	select NEED_MACH_MEMORY_H
-+	select NEED_MACH_IO_H
-+	select COMMON_CLK
-+	select ARCH_HAS_CPUFREQ
-+	select GENERIC_CLOCKEVENTS
-+	select MACH_BCM2709
-+	select VC4
-+	select FIQ
-+#	select ZONE_DMA
-+	help
-+	  This enables support for Broadcom BCM2709 boards.
-+
- endchoice
- 
- menu "Multiple platform selection"
-@@ -967,6 +1004,8 @@
- source "arch/arm/mach-vt8500/Kconfig"
- 
- source "arch/arm/mach-w90x900/Kconfig"
-+source "arch/arm/mach-bcm2708/Kconfig"
-+source "arch/arm/mach-bcm2709/Kconfig"
- 
- source "arch/arm/mach-zynq/Kconfig"
- 
-diff -Nur linux-4.0.5/arch/arm/Kconfig.debug linux-4.0-rpi/arch/arm/Kconfig.debug
---- linux-4.0.5/arch/arm/Kconfig.debug	2015-06-06 17:21:22.000000000 +0200
-+++ linux-4.0-rpi/arch/arm/Kconfig.debug	2015-06-23 13:23:30.778045828 +0200
-@@ -1209,6 +1209,14 @@
- 		  options; the platform specific options are deprecated
- 		  and will be soon removed.
- 
-+	config DEBUG_BCM2708_UART0
-+		bool "Broadcom BCM2708 UART0 (PL011)"
-+		depends on MACH_BCM2708
-+		help
-+		  Say Y here if you want the debug print routines to direct
-+		  their output to UART 0. The port must have been initialised
-+		  by the boot-loader before use.
-+
- endchoice
- 
- config DEBUG_AT91_UART
-diff -Nur linux-4.0.5/arch/arm/Makefile linux-4.0-rpi/arch/arm/Makefile
---- linux-4.0.5/arch/arm/Makefile	2015-06-06 17:21:22.000000000 +0200
-+++ linux-4.0-rpi/arch/arm/Makefile	2015-06-23 13:23:30.778045828 +0200
-@@ -146,6 +146,8 @@
- machine-$(CONFIG_ARCH_AT91)		+= at91
- machine-$(CONFIG_ARCH_AXXIA)		+= axxia
- machine-$(CONFIG_ARCH_BCM)		+= bcm
-+machine-$(CONFIG_ARCH_BCM2708)		+= bcm2708
-+machine-$(CONFIG_ARCH_BCM2709)		+= bcm2709
- machine-$(CONFIG_ARCH_BERLIN)		+= berlin
- machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
- machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
-diff -Nur linux-4.0.5/arch/arm/boot/dts/Makefile linux-4.0-rpi/arch/arm/boot/dts/Makefile
---- linux-4.0.5/arch/arm/boot/dts/Makefile	2015-06-06 17:21:22.000000000 +0200
-+++ linux-4.0-rpi/arch/arm/boot/dts/Makefile	2015-06-23 13:23:30.778045828 +0200
-@@ -1,5 +1,21 @@
- ifeq ($(CONFIG_OF),y)
- 
-+dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b.dtb
-+dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b-plus.dtb
-+dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-cm.dtb
-+dtb-$(CONFIG_BCM2709_DT) += bcm2709-rpi-2-b.dtb
-+
-+# Raspberry Pi
-+ifeq ($(CONFIG_BCM2708_DT),y)
-+   RPI_DT_OVERLAYS=y
-+endif
-+ifeq ($(CONFIG_BCM2709_DT),y)
-+   RPI_DT_OVERLAYS=y
-+endif
-+ifeq ($(CONFIG_ARCH_BCM2835),y)
-+   RPI_DT_OVERLAYS=y
-+endif
-+
- dtb-$(CONFIG_MACH_ASM9260) += \
- 	alphascale-asm9260-devkit.dtb
- # Keep at91 dtb files sorted alphabetically for each SoC
-@@ -645,7 +661,18 @@
- 	mt6592-evb.dtb \
- 	mt8127-moose.dtb \
- 	mt8135-evbp1.dtb
-+
-+targets += dtbs dtbs_install
-+targets += $(dtb-y)
-+
- endif
- 
- always		:= $(dtb-y)
- clean-files	:= *.dtb
-+
-+# Enable fixups to support overlays on BCM2708 platforms
-+ifeq ($(RPI_DT_OVERLAYS),y)
-+	DTC_FLAGS ?= -@
-+endif
-+
-+subdir-y  += overlays
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
---- linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,127 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "Raspberry Pi Model B+";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+
-+		audio = <&audio>,"status";
-+		watchdog = <&watchdog>,"status";
-+		random = <&random>,"status";
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-b.dts linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-b.dts
---- linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-b.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-b.dts	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "Raspberry Pi Model B";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <28 29 30 31>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 16 1>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		audio = <&audio>,"status";
-+		watchdog = <&watchdog>,"status";
-+		random = <&random>,"status";
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-cm.dts linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-cm.dts
---- linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-cm.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-cm.dts	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,91 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708-rpi-cm.dtsi"
-+
-+/ {
-+	model = "Raspberry Pi Compute Module";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi
---- linux-4.0.5/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,30 @@
-+/include/ "bcm2708.dtsi"
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&audio {
-+	status = "okay";
-+};
-+
-+/ {
-+	__overrides__ {
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2708.dtsi linux-4.0-rpi/arch/arm/boot/dts/bcm2708.dtsi
---- linux-4.0.5/arch/arm/boot/dts/bcm2708.dtsi	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2708.dtsi	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,19 @@
-+/include/ "bcm2708_common.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "BCM2708";
-+
-+	chosen {
-+		/* No padding required - the boot loader can do that. */
-+		bootargs = "";
-+	};
-+
-+	soc {
-+		ranges = <0x7e000000 0x20000000 0x01000000>;
-+
-+		arm-pmu {
-+			compatible = "arm,arm1176-pmu";
-+		};
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2708_common.dtsi linux-4.0-rpi/arch/arm/boot/dts/bcm2708_common.dtsi
---- linux-4.0.5/arch/arm/boot/dts/bcm2708_common.dtsi	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2708_common.dtsi	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,273 @@
-+/include/ "skeleton.dtsi"
-+
-+/ {
-+	interrupt-parent = <&intc>;
-+
-+	aliases {
-+		audio = &audio;
-+		sound = &sound;
-+		soc = &soc;
-+		dma = &dma;
-+		intc = &intc;
-+		watchdog = &watchdog;
-+		random = &random;
-+		mailbox = &mailbox;
-+		gpio = &gpio;
-+		uart0 = &uart0;
-+		i2s  = &i2s;
-+		spi0 = &spi0;
-+		i2c0 = &i2c0;
-+		uart1 = &uart1;
-+		mmc = &mmc;
-+		i2c1 = &i2c1;
-+		i2c2 = &i2c2;
-+		usb = &usb;
-+		leds = &leds;
-+		fb = &fb;
-+		vchiq = &vchiq;
-+		thermal = &thermal;
-+		clocks = &clocks;
-+	};
-+
-+	/* Onboard audio */
-+	audio: audio {
-+		compatible = "brcm,bcm2835-audio";
-+		brcm,pwm-channels = <8>;
-+		status = "disabled";
-+	};
-+
-+	/* External sound card */
-+	sound: sound {
-+	};
-+
-+	soc: soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		dma: dma@7e007000 {
-+			compatible = "brcm,bcm2835-dma";
-+			reg = <0x7e007000 0xf00>;
-+			interrupts = <1 16>,
-+				     <1 17>,
-+				     <1 18>,
-+				     <1 19>,
-+				     <1 20>,
-+				     <1 21>,
-+				     <1 22>,
-+				     <1 23>,
-+				     <1 24>,
-+				     <1 25>,
-+				     <1 26>,
-+				     <1 27>,
-+				     <1 28>;
-+
-+			#dma-cells = <1>;
-+			brcm,dma-channel-mask = <0x7f35>;
-+		};
-+
-+		intc: interrupt-controller {
-+			compatible = "brcm,bcm2708-armctrl-ic";
-+			reg = <0x7e00b200 0x200>;
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		mailbox: mailbox@7e00b800 {
-+			compatible = "brcm,bcm2708-vcio";
-+			reg = <0x7e00b880 0x40>;
-+			interrupts = <0 1>;
-+		};
-+
-+		watchdog: watchdog@7e100000 {
-+			compatible = "brcm,bcm2835-pm-wdt";
-+			reg = <0x7e100000 0x28>;
-+			status = "disabled";
-+		};
-+
-+		random: rng@7e104000 {
-+			compatible = "brcm,bcm2835-rng";
-+			reg = <0x7e104000 0x10>;
-+			status = "disabled";
-+		};
-+
-+		gpio: gpio {
-+			compatible = "brcm,bcm2835-gpio";
-+			reg = <0x7e200000 0xb4>;
-+			interrupts = <2 17>, <2 18>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		uart0: uart@7e201000 {
-+			compatible = "arm,pl011", "arm,primecell";
-+			reg = <0x7e201000 0x1000>;
-+			interrupts = <2 25>;
-+			clocks = <&clk_uart0 &clk_apb_p>;
-+			clock-names = "uartclk","apb_pclk";
-+			arm,primecell-periphid = <0x00241011>; // For an explanation, see
-+			// https://github.com/raspberrypi/linux/commit/13731d862cf5219216533a3b0de052cee4cc5038
-+			status = "disabled";
-+		};
-+
-+		i2s: i2s@7e203000 {
-+			compatible = "brcm,bcm2708-i2s";
-+			reg = <0x7e203000 0x20>,
-+			      <0x7e101098 0x02>;
-+
-+			//dmas = <&dma 2>,
-+			//       <&dma 3>;
-+			dma-names = "tx", "rx";
-+			status = "disabled";
-+		};
-+
-+		spi0: spi@7e204000 {
-+			compatible = "brcm,bcm2835-spi";
-+			reg = <0x7e204000 0x1000>;
-+			interrupts = <2 22>;
-+			clocks = <&clk_spi>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+			/* the dma channels */
-+			dmas = <&dma 6>, <&dma 7>;
-+			dma-names = "tx", "rx";
-+			/* the chipselects used - <0> means native GPIO
-+			 * add more gpios if necessary as <&gpio 6 1>
-+			 * (but do not forget to make them output!)
-+			 */
-+			cs-gpios = <0>, <0>;
-+		};
-+
-+		i2c0: i2c@7e205000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e205000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		uart1: uart@7e215040 {
-+			compatible = "brcm,bcm2835-aux-uart", "ns16550";
-+			reg = <0x7e215040 0x40>;
-+			interrupts = <1 29>;
-+			clock-frequency = <500000000>;
-+			reg-shift = <2>;
-+			no-loopback-test;
-+			status = "disabled";
-+	        };
-+
-+		mmc: mmc@7e300000 {
-+			compatible = "brcm,bcm2835-mmc";
-+			reg = <0x7e300000 0x100>;
-+			interrupts = <2 30>;
-+			clocks = <&clk_mmc>;
-+			dmas = <&dma 11>,
-+			       <&dma 11>;
-+			dma-names = "tx", "rx";
-+			status = "disabled";
-+		};
-+
-+		i2c1: i2c@7e804000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e804000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c2: i2c@7e805000 {
-+			// Beware - this is shared with the HDMI module.
-+			// Careless use may break (really) your display.
-+			// Caveat emptor.
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e805000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		usb: usb@7e980000 {
-+			compatible = "brcm,bcm2708-usb";
-+			reg = <0x7e980000 0x10000>,
-+			      <0x7e006000 0x1000>;
-+			interrupts = <2 0>,
-+				     <1 9>;
-+		};
-+
-+		leds: leds {
-+			compatible = "gpio-leds";
-+		};
-+
-+		fb: fb {
-+			compatible = "brcm,bcm2708-fb";
-+			status = "disabled";
-+		};
-+
-+		vchiq: vchiq {
-+			compatible = "brcm,bcm2835-vchiq";
-+			reg = <0x7e00b840 0xf>;
-+			interrupts = <0 2>;
-+		};
-+
-+		thermal: thermal {
-+			compatible = "brcm,bcm2835-thermal";
-+		};
-+	};
-+
-+	clocks: clocks {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		clk_mmc: clock@0 {
-+			compatible = "fixed-clock";
-+			reg = <0>;
-+			#clock-cells = <0>;
-+			clock-output-names = "mmc";
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_i2c: clock@1 {
-+			compatible = "fixed-clock";
-+			reg = <1>;
-+			#clock-cells = <0>;
-+			clock-output-names = "i2c";
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_spi: clock@2 {
-+			compatible = "fixed-clock";
-+			reg = <2>;
-+			#clock-cells = <0>;
-+			clock-output-names = "spi";
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_uart0: clock@3 {
-+			compatible = "fixed-clock";
-+			reg = <3>;
-+			#clock-cells = <0>;
-+			clock-output-names = "uart0_pclk";
-+			clock-frequency = <3000000>;
-+		};
-+
-+		clk_apb_p: clock@4 {
-+			compatible = "fixed-clock";
-+			reg = <4>;
-+			#clock-cells = <0>;
-+			clock-output-names = "apb_pclk";
-+			clock-frequency = <126000000>;
-+		};
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2709-rpi-2-b.dts linux-4.0-rpi/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
---- linux-4.0.5/arch/arm/boot/dts/bcm2709-rpi-2-b.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2709-rpi-2-b.dts	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,127 @@
-+/dts-v1/;
-+
-+/include/ "bcm2709.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2709";
-+	model = "Raspberry Pi 2 Model B";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+
-+		audio = <&audio>,"status";
-+		watchdog = <&watchdog>,"status";
-+		random = <&random>,"status";
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2709.dtsi linux-4.0-rpi/arch/arm/boot/dts/bcm2709.dtsi
---- linux-4.0.5/arch/arm/boot/dts/bcm2709.dtsi	1970-01-01 01:00:00.000000000 +0100
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2709.dtsi	2015-06-23 13:23:30.786045839 +0200
-@@ -0,0 +1,70 @@
-+/include/ "bcm2708_common.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2709";
-+	model = "BCM2709";
-+
-+	chosen {
-+		/* No padding required - the boot loader can do that. */
-+		bootargs = "";
-+	};
-+
-+	soc {
-+		ranges = <0x7e000000 0x3f000000 0x01000000>;
-+
-+		arm-pmu {
-+			compatible = "arm,cortex-a7-pmu";
-+			interrupts = <3 9>;
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv7-timer";
-+		clock-frequency = <19200000>;
-+		interrupts = <3 0>, // PHYS_SECURE_PPI
-+			     <3 1>, // PHYS_NONSECURE_PPI
-+			     <3 3>, // VIRT_PPI
-+			     <3 2>; // HYP_PPI
-+		always-on;
-+	};
-+
-+	cpus: cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		v7_cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf00>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf01>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu2: cpu@2 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf02>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu3: cpu@3 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf03>;
-+			clock-frequency = <800000000>;
-+		};
-+	};
-+
-+	__overrides__ {
-+		arm_freq = <&v7_cpu0>, "clock-frequency:0",
-+		       <&v7_cpu1>, "clock-frequency:0",
-+		       <&v7_cpu2>, "clock-frequency:0",
-+		       <&v7_cpu3>, "clock-frequency:0";
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts linux-4.0-rpi/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
---- linux-4.0.5/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts	2015-06-06 17:21:22.000000000 +0200
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts	2015-06-23 13:23:30.786045839 +0200
-@@ -4,27 +4,40 @@
- / {
- 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
- 	model = "Raspberry Pi Model B+";
--
--	leds {
--		act {
--			gpios = <&gpio 47 0>;
--		};
--
--		pwr {
--			label = "PWR";
--			gpios = <&gpio 35 0>;
--			default-state = "keep";
--			linux,default-trigger = "default-on";
--		};
--	};
- };
- 
- &gpio {
--	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
--
--	/* I2S interface */
--	i2s_alt0: i2s_alt0 {
-+	i2s_pins: i2s {
- 		brcm,pins = <18 19 20 21>;
- 		brcm,function = <4>; /* alt0 */
- 	};
- };
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&act_led {
-+	gpios = <&gpio 47 0>;
-+};
-+
-+&leds {
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+	};
-+};
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-4.0-rpi/arch/arm/boot/dts/bcm2835-rpi-b.dts
---- linux-4.0.5/arch/arm/boot/dts/bcm2835-rpi-b.dts	2015-06-06 17:21:22.000000000 +0200
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2835-rpi-b.dts	2015-06-23 13:23:30.786045839 +0200
-@@ -5,19 +5,28 @@
- 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
- 	model = "Raspberry Pi Model B";
- 
--	leds {
--		act {
--			gpios = <&gpio 16 1>;
--		};
--	};
- };
- 
- &gpio {
--	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
--
--	/* I2S interface */
--	i2s_alt2: i2s_alt2 {
-+	i2s_pins: i2s {
- 		brcm,pins = <28 29 30 31>;
--		brcm,function = <6>; /* alt2 */
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&act_led {
-+	gpios = <&gpio 16 1>;
-+};
-+
-+/ {
-+	__overrides__ {
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
- 	};
- };
-diff -Nur linux-4.0.5/arch/arm/boot/dts/bcm2835-rpi.dtsi linux-4.0-rpi/arch/arm/boot/dts/bcm2835-rpi.dtsi
---- linux-4.0.5/arch/arm/boot/dts/bcm2835-rpi.dtsi	2015-06-06 17:21:22.000000000 +0200
-+++ linux-4.0-rpi/arch/arm/boot/dts/bcm2835-rpi.dtsi	2015-06-23 13:23:30.786045839 +0200
-@@ -1,51 +1,112 @@
- /include/ "bcm2835.dtsi"
- 
- / {
-+	/* This is left here in case u-boot needs it */
- 	memory {
- 		reg = <0 0x10000000>;
- 	};
- 
--	leds {
-+	aliases {
-+		soc = &soc;
-+		spi0 = &spi0;
-+		i2c0 = &i2c0;
-+		i2c1 = &i2c1;
-+		i2s  = &i2s;
-+		gpio = &gpio;
-+		intc = &intc;
-+		leds = &leds;
-+		sound = &sound;
-+	};
-+
-+	leds: leds {
- 		compatible = "gpio-leds";
- 
--		act {
--			label = "ACT";
--			default-state = "keep";
--			linux,default-trigger = "heartbeat";
-+