change defaults for CONFIG/BUILD/INSTALL styles

All packages need an update, so here is a very huge commit.
Most of the 460 source packages use automatic style for configuration,
building and installing. Make these styles default to "auto".
If you have a package, which does not conform to this, just use
manual style and add a do-$task make target.

I added a new style named AUTOTOOL style, which is needed for some
broken packages, which needs to be updated via autoconf or automake.

I renamed CONFIGURE_STYLE to CONFIG_STYLE.

Updates for some packages, which have newer upstream versions.

Renaming of all package/*/extra directories. Use the directory
src/ to provide overwrites of source files or to add the code, when
no upstream package is available or used. src directory will be automatically
used.

1 files changed, 420 insertions, 0 deletions

diff --git a/package/scsi-spin/src/scsi-spin.c b/package/scsi-spin/src/scsi-spin.c
new file mode 100644
index 000000000..443934c78
--- /dev/null
+++ b/package/scsi-spin/src/scsi-spin.c
@@ -0,0 +1,420 @@
+/*
+  File: scsi-spin.c
+  
+  A simple program to manually spin up and down a scsi device.
+
+  Copyright 1998 Rob Browning <rlb@cs.utexas.edu>
+  Copyright 2001 Eric Delaunay <delaunay@debian.org>
+
+  This source is covered by the terms the GNU Public License.
+
+  Some of the original code came from
+    The Linux SCSI programming HOWTO
+    Heiko Ei<DF>feldt heiko@colossus.escape.de
+    v1.5, 7 May 1996
+
+*/
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <string.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <mntent.h>
+#include <sys/ioctl.h>
+#include <scsi/sg.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_ioctl.h>
+
+#include <linux/major.h>
+#include <sys/sysmacros.h>
+#include <sys/stat.h>
+
+#define SCSI_DISK_MAJOR(M) ((M) == SCSI_DISK0_MAJOR || \
+			    ((M) >= SCSI_DISK1_MAJOR && \
+			     (M) <= SCSI_DISK7_MAJOR) || \
+			    ((M) >= SCSI_DISK8_MAJOR && \
+			     (M) <= SCSI_DISK15_MAJOR))
+
+#define SCSI_BLK_MAJOR(M) \
+  (SCSI_DISK_MAJOR(M) || \
+   (M) == SCSI_CDROM_MAJOR)
+
+/* define USE_SG_IO to send commands using scsi generic interface
+ */
+#define USE_SG_IO
+
+#ifdef USE_SG_IO
+int opt_oldioctl = 0;
+int opt_verbose = 0;
+
+const char* SENSE_KEY_STR[16] = {
+    "NO SENSE",
+    "RECOVERED ERROR",
+    "NOT READY",
+    "MEDIUM ERROR",
+    "HARDWARE ERROR",
+    "ILLEGAL REQUEST",
+    "UNIT ATTENTION",
+    "DATA PROJECT",
+    "BLANK CHECK",
+    "VENDOR-SPECIFIC",
+    "COPY ARBORTED",
+    "ABORTED COMMAND",
+    "EQUAL",
+    "VOLUME OVERFLOW",
+    "MISCOMPARED",
+    "RESERVED"
+};
+
+/* process a complete SCSI cmd. Use the generic SCSI interface. */
+static int handle_SCSI_cmd(const int fd,
+                           const unsigned cmd_len,      /* command length */
+                           unsigned char *cmd,	        /* command buffer */
+                           const unsigned in_size,      /* input data size */
+                           const unsigned out_size,     /* output data size */
+                           unsigned char *io_buff,      /* i/o buffer */
+                           unsigned sense_size,         /* sense buf length */
+                           unsigned char* sense_buff,   /* sense buffer */
+			   const unsigned timeout       /* timeout in s */
+                           ) {
+  ssize_t status = 0;
+  int k, err;
+  sg_io_hdr_t sg_hdr;
+  unsigned char sense[16];
+  
+  /* safety checks */
+  if (!cmd_len) return -1;            /* need a cmd_len != 0 */
+  if (in_size > 0 && io_buff == NULL) return -1; /* need an input buffer != NULL */
+  /* generic SCSI device header construction */
+  memset(&sg_hdr, 0, sizeof(sg_hdr));
+  sg_hdr.interface_id = 'S';
+  sg_hdr.dxfer_direction = SG_DXFER_NONE;
+  sg_hdr.cmd_len = cmd_len;
+  sg_hdr.cmdp = cmd;
+  sg_hdr.dxfer_len = in_size;
+  sg_hdr.dxferp = io_buff;
+  sg_hdr.timeout  = (timeout ? timeout : 2)*1000;	/* timeout in ms */
+  if (sense_buff == NULL) {
+    sense_buff = sense;
+    sense_size = sizeof(sense);
+  }
+  sg_hdr.mx_sb_len = sense_size;
+  sg_hdr.sbp = sense_buff;
+
+  if (opt_verbose > 1) {
+    fprintf( stderr, "       cmd = " );
+    for( k = 0 ; k < cmd_len ; k++ )
+      fprintf( stderr, " %02x", cmd[k] );
+    fputc( '\n', stderr );
+  }
+  /* send command */
+  status = ioctl( fd, SG_IO, &sg_hdr );
+  if (status < 0 || sg_hdr.masked_status == CHECK_CONDITION) {
+    /* some error happened */
+    fprintf( stderr, "SG_IO: status = 0x%x cmd = 0x%x\n",
+             sg_hdr.status, cmd[0] );
+    if (opt_verbose > 0) {
+      fprintf( stderr, "       sense = " );
+      for( k = 0 ; k < sg_hdr.sb_len_wr ; k++ )
+        fprintf( stderr, " %02x", sense_buff[k] );
+      fputc( '\n', stderr );
+      err = sense_buff[0] & 0x7f;
+      if (err == 0x70 || err == 0x71) {
+        fprintf( stderr, "               (%s)\n", SENSE_KEY_STR[sense_buff[2] & 0xf] );
+      }
+    }
+    perror("");
+  }
+  return status;  /* 0 means no error */
+}
+#endif
+
+static void
+scsi_spin(const int fd, const int desired_state, const int load_eject, const int wait) {
+#ifdef USE_SG_IO
+  if (! opt_oldioctl) {
+    unsigned char cmdblk [6] =
+      { START_STOP,  /* command */
+        (wait ? 0 : 1),  /* lun(3 bits)/reserved(4 bits)/immed(1 bit) */
+        0,  /* reserved */
+        0,  /* reserved */
+        (load_eject ? 2 : 0)
+            | (desired_state ? 1 : 0),  /* reserved(6)/LoEj(1)/Start(1)*/
+        0 };/* reserved/flag/link */
+  
+    if (handle_SCSI_cmd(fd, sizeof(cmdblk), cmdblk, 0, 0, NULL, 0, NULL, wait)) {
+      fprintf( stderr, "start/stop failed\n" );
+      exit(2);
+    }
+    return;
+  }
+#endif
+  int ret;
+  if (desired_state != 0)
+    ret = ioctl( fd, SCSI_IOCTL_START_UNIT );
+  else
+    ret = ioctl( fd, SCSI_IOCTL_STOP_UNIT );
+  if (ret < 0)
+    perror( "scsi_spin: ioctl" );
+}
+
+static void
+scsi_lock(const int fd, const int door_lock) {
+#ifdef USE_SG_IO
+  if (! opt_oldioctl) {
+    unsigned char cmdblk [6] =
+      { ALLOW_MEDIUM_REMOVAL,  /* command */
+        0,  /* lun(3 bits)/reserved(5 bits) */
+        0,  /* reserved */
+        0,  /* reserved */
+        (door_lock ? 1 : 0), /* reserved(7)/Prevent(1)*/
+        0 };/* control */
+  
+    if (handle_SCSI_cmd(fd, sizeof(cmdblk), cmdblk, 0, 0, NULL, 0, NULL, 2)) {
+      fprintf( stderr, "lock/unlock failed\n" );
+      exit(2);
+    }
+    return;
+  }
+#endif
+  int ret;
+  if (door_lock != 0)
+    ret = ioctl( fd, SCSI_IOCTL_DOORLOCK );
+  else
+    ret = ioctl( fd, SCSI_IOCTL_DOORUNLOCK );
+  if (ret < 0)
+    perror( "scsi_lock: ioctl" );
+}
+
+/* -- [ED] --
+ * Check if the device has some of its partitions mounted.
+ * The check is done by comparison between device major and minor numbers so it
+ * even works when the device name of the mount point is not the same of the
+ * one passed to scsi-spin (for example, scsidev creates device aliases under
+ * /dev/scsi).
+ */
+static int
+is_mounted( const char* device, int use_proc, int devmaj, int devmin )
+{
+  struct mntent *mnt;
+  struct stat devstat;
+  int mounted = 0;
+  struct {
+    __uint32_t dev_id;
+    __uint32_t host_unique_id;
+  } scsi_dev_id, scsi_id;
+  FILE *mtab;
+  char *mtabfile = use_proc ? "/proc/mounts" : "/etc/mtab";
+
+  if (devmaj == SCSI_GENERIC_MAJOR) {
+    /* scsi-spin device arg is /dev/sgN */
+    int fd = open( device, O_RDONLY );
+    if (fd >= 0) {
+      int ret = ioctl( fd, SCSI_IOCTL_GET_IDLUN, &scsi_dev_id );
+      close( fd );
+      if (ret < 0)
+	return -1;
+    }
+  }
+  /*printf("devid=%x\n",scsi_dev_id.dev_id);*/
+
+  mtab = setmntent( mtabfile, "r" );
+  if (mtab == NULL)
+    return -1;
+
+  while ((mnt = getmntent( mtab )) != 0) {
+    char * mdev = mnt->mnt_fsname;
+    if (stat( mdev, &devstat ) == 0) {
+      int maj = major(devstat.st_rdev);
+      int min = minor(devstat.st_rdev);
+      if (SCSI_DISK_MAJOR(maj) && SCSI_DISK_MAJOR(devmaj)) {
+	if (maj == devmaj && (min & ~15) == (devmin & ~15)) {
+	  mounted = 1;
+	  break;
+	}
+      }
+      else if (devmaj == SCSI_GENERIC_MAJOR && SCSI_BLK_MAJOR(maj)) {
+	/* scsi-spin device arg is /dev/sgN */
+	int fd = open( mdev, O_RDONLY );
+	if (fd >= 0) {
+	  int ret = ioctl( fd, SCSI_IOCTL_GET_IDLUN, &scsi_id );
+	  close( fd );
+	  /*printf("id=%x\n",scsi_id.dev_id);*/
+	  if (ret == 0 && scsi_id.dev_id == scsi_dev_id.dev_id) {
+	    /* same SCSI ID => same device */
+	    mounted = 1;
+	    break;
+	  }
+	}
+      }
+      else if (maj == SCSI_CDROM_MAJOR && maj == devmaj && min == devmin) {
+	mounted = 1;
+	break;
+      }
+    }
+  }
+
+  endmntent( mtab );
+  return mounted;
+}
+
+static void
+usage()
+{
+  static char usage_string[] = 
+    "usage: scsi-spin {-u,-d} [-nfpe] device\n"
+    "          -u, --up       spin up device.\n"
+    "          -d, --down     spin down device.\n"
+    "          -v, --verbose[=n] verbose mode (1: normal, 2: debug).\n"
+#ifdef SG_IO
+    "          -e, --loej     load (-u) or eject (-d) removable medium.\n"
+    "          -w, --wait=[n] wait the spin up/down operation to be completed\n"
+    "                         (n is the number of seconds to timeout).\n"
+    "          -I, --oldioctl use legacy ioctl instead of SG I/O (-e,-w ignored).\n"
+#endif
+    "          -l, --lock     prevent medium removal.\n"
+    "          -L, --unlock   allow medium removal.\n"
+    "          -n, --noact    do nothing but check if the device is in use.\n"
+    "          -f, --force    force spinning up/down even if the device is in use.\n"
+    "          -p, --proc     use /proc/mounts instead of /etc/mtab to do the check.\n"
+    "       device is one of /dev/sd[a-z], /dev/scd[0-9]* or /dev/sg[0-9]*.\n";
+
+  fputs(usage_string, stderr);
+}
+
+int
+main(int argc, char *argv[])
+{
+  int result = 0;
+  int fd;
+  int opt_up = 0;
+  int opt_down = 0;
+  int opt_loej = 0;
+  int opt_wait = 0;
+  int opt_force = 0;
+  int opt_noact = 0;
+  int opt_proc = 0;
+  int opt_lock = 0;
+  int opt_unlock = 0;
+  struct option cmd_line_opts[] = {
+    {"verbose", 2, NULL, 'v'},
+    {"up", 0, NULL, 'u'},
+    {"down", 0, NULL, 'd'},
+#ifdef SG_IO
+    {"loej", 0, NULL, 'e'},
+    {"wait", 2, NULL, 'w'},
+    {"oldioctl", 0, NULL, 'I'},
+#endif
+    {"lock", 0, NULL, 'l'},
+    {"unlock", 0, NULL, 'L'},
+    {"force", 0, NULL, 'f'},
+    {"noact", 0, NULL, 'n'},
+    {"proc", 0, NULL, 'p'},
+    {0, 0, 0, 0},
+  };
+  char* endptr = "";
+  char* device;
+  struct stat devstat;
+  
+  char c;
+  while((c = getopt_long(argc, argv, "vudewlLfnp", cmd_line_opts, NULL)) != EOF) {
+    switch (c) {
+    case 'v': opt_verbose = optarg ? strtol(optarg, &endptr, 10) : opt_verbose+1;
+	      if (*endptr) goto error;
+	      break;
+    case 'u': opt_up = 1; break;
+    case 'd': opt_down = 1; break;
+#ifdef SG_IO
+    case 'e': opt_loej = 1; break;
+    case 'w': opt_wait = optarg ? strtol(optarg, &endptr, 10) : opt_wait+1;
+	      if (*endptr) goto error;
+	      break;
+    case 'I': opt_oldioctl = 1; break;
+#endif
+    case 'f': opt_force = 1; break;
+    case 'l': opt_lock = 1; break;
+    case 'L': opt_unlock = 1; break;
+    case 'n': opt_noact = 1; break;
+    case 'p': opt_proc = 1; break;
+    default:
+error:
+      usage();
+      exit(1);
+    }
+  }
+
+  if(opt_up && opt_down) {
+    fputs("scsi-spin: specified both --up and --down.  "
+          "Is this some kind of test?\n", stderr);
+    exit(1);
+  }
+  if(opt_lock && opt_unlock) {
+    fputs("scsi-spin: specified both --lock and --unlock.  "
+          "Is this some kind of test?\n", stderr);
+    exit(1);
+  }
+  if (opt_oldioctl && (opt_wait || opt_loej)) {
+    fputs("scsi-spin: -e or -w not working in old ioctl mode.\n", stderr);
+    exit(1);
+  }
+  if(!(opt_up || opt_down || opt_lock || opt_unlock)) {
+    fputs("scsi-spin: must specify --up, --down, --lock or --unlock at least.\n", stderr);
+    exit(1);
+  }
+
+  if(optind != (argc - 1)) {
+    usage();
+    exit(1);
+  }
+
+  device = argv[optind];
+
+  if(stat(device, &devstat) == -1) {
+    fprintf(stderr, "scsi-spin [stat]: %s: %s\n", device, strerror(errno));
+    result = 1;
+  }
+
+  if (is_mounted( device, opt_proc, major(devstat.st_rdev), minor(devstat.st_rdev) )) {
+    if (! opt_force) {
+      fprintf( stderr, "scsi-spin: device already in use (mounted partition)\n" );
+      exit(1);
+    }
+    else {
+      fprintf( stderr, "scsi-spin [warning]: device is mounted but --force is passed\n" );
+    }
+  }
+
+  /* first try to open the device r/w */
+  fd = open(device, O_RDWR);
+  if (fd < 0) {
+    /* if it's fail, then try ro */
+    fd = open(device, O_RDONLY);
+    if (fd < 0) {
+      fprintf(stderr, "scsi-spin [open]: %s: %s\n", device, strerror(errno));
+      exit(1);
+    }
+  }
+
+  if ((S_ISBLK(devstat.st_mode) &&
+       SCSI_BLK_MAJOR(major(devstat.st_rdev))) ||
+      (S_ISCHR(devstat.st_mode) &&
+       major(devstat.st_rdev) == SCSI_GENERIC_MAJOR))
+  {
+    if (! opt_noact) {
+      if (opt_lock || opt_unlock)
+        scsi_lock(fd, opt_lock);
+      if (opt_up || opt_down)
+        scsi_spin(fd, opt_up, opt_loej, opt_wait);
+    }
+  }
+  else {
+    fprintf(stderr, "scsi-spin: %s is not a disk or generic SCSI device.\n", device);
+    result = 1;
+  }
+
+  close(fd);
+  return result;
+}