Initial import

2 files changed, 100 insertions, 0 deletions

diff --git a/package/hostapd/files/hostapd.conf b/package/hostapd/files/hostapd.conf
new file mode 100644
index 000000000..8676e96a6
--- /dev/null
+++ b/package/hostapd/files/hostapd.conf
@@ -0,0 +1,23 @@
+##### hostapd configuration file #####
+interface=wlan0
+#bridge=br0
+driver=nl80211
+logger_syslog=-1
+logger_syslog_level=0
+logger_stdout=-1
+logger_stdout_level=0
+ctrl_interface=/var/run/hostapd
+ctrl_interface_group=0
+# set ssid, channel and mode
+ssid=openadk
+hw_mode=g
+channel=1
+# enable WPA2 (WEP/WPA disabled)
+macaddr_acl=0
+auth_algs=1
+ignore_broadcast_ssid=0
+wpa=2
+wpa_passphrase=secret123
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=TKIP
+rsn_pairwise=CCMP
diff --git a/package/hostapd/files/hostapd.config b/package/hostapd/files/hostapd.config
new file mode 100644
index 000000000..7f9815dff
--- /dev/null
+++ b/package/hostapd/files/hostapd.config
@@ -0,0 +1,77 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+#CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+#CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# IEEE 802.11F/IAPP
+#CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+# CONFIG_RSN_PREAUTH=y
+
+# Integrated EAP authenticator
+#CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP authenticator
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP authenticator
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP authenticator
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP authenticator
+#CONFIG_EAP_PEAP=y
+
+# EAP-PSK for the integrated EAP authenticator
+#CONFIG_EAP_PSK=y
+
+# EAP-GTC for the integrated EAP authenticator
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP authenticator
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP authenticator
+#CONFIG_EAP_SIM=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# authenticator from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+#
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y