c++ compiler fixes

when C++ compiler is disabled by user, do not allow to
compile packages , which require a C++ compiler.
Older libtool unnecessary checks for c++ tools, so
regenerate autotool stuff.

1 files changed, 0 insertions, 641 deletions

diff --git a/package/cgilib/patches/patch-install-sh b/package/cgilib/patches/patch-install-sh
deleted file mode 100644
index a4ebbb915..000000000
--- a/package/cgilib/patches/patch-install-sh
+++ /dev/null
@@ -1,641 +0,0 @@
-$Id: update-patches 24 2008-08-31 14:56:13Z wbx $
---- cgilib-0.7.orig/install-sh	2009-02-08 19:47:04.000000000 +0100
-+++ cgilib-0.7/install-sh	2009-05-09 03:58:09.000000000 +0200
-@@ -1,7 +1,7 @@
- #!/bin/sh
- # install - install a program, script, or datafile
- 
--scriptversion=2006-12-25.00
-+scriptversion=2005-05-14.22
- 
- # This originates from X11R5 (mit/util/scripts/install.sh), which was
- # later released in X11R6 (xc/config/util/install.sh) with the
-@@ -39,68 +39,38 @@ scriptversion=2006-12-25.00
- # when there is no Makefile.
- #
- # This script is compatible with the BSD install script, but was written
--# from scratch.
--
--nl='
--'
--IFS=" ""	$nl"
-+# from scratch.  It can only install one file at a time, a restriction
-+# shared with many OS's install programs.
- 
- # set DOITPROG to echo to test this script
- 
- # Don't use :- since 4.3BSD and earlier shells don't like it.
--doit=${DOITPROG-}
--if test -z "$doit"; then
--  doit_exec=exec
--else
--  doit_exec=$doit
--fi
--
--# Put in absolute file names if you don't have them in your path;
--# or use environment vars.
--
--chgrpprog=${CHGRPPROG-chgrp}
--chmodprog=${CHMODPROG-chmod}
--chownprog=${CHOWNPROG-chown}
--cmpprog=${CMPPROG-cmp}
--cpprog=${CPPROG-cp}
--mkdirprog=${MKDIRPROG-mkdir}
--mvprog=${MVPROG-mv}
--rmprog=${RMPROG-rm}
--stripprog=${STRIPPROG-strip}
--
--posix_glob='?'
--initialize_posix_glob='
--  test "$posix_glob" != "?" || {
--    if (set -f) 2>/dev/null; then
--      posix_glob=
--    else
--      posix_glob=:
--    fi
--  }
--'
-+doit="${DOITPROG-}"
- 
--posix_mkdir=
-+# put in absolute paths if you don't have them in your path; or use env. vars.
- 
--# Desired mode of installed file.
--mode=0755
-+mvprog="${MVPROG-mv}"
-+cpprog="${CPPROG-cp}"
-+chmodprog="${CHMODPROG-chmod}"
-+chownprog="${CHOWNPROG-chown}"
-+chgrpprog="${CHGRPPROG-chgrp}"
-+stripprog="${STRIPPROG-strip}"
-+rmprog="${RMPROG-rm}"
-+mkdirprog="${MKDIRPROG-mkdir}"
- 
--chgrpcmd=
--chmodcmd=$chmodprog
-+chmodcmd="$chmodprog 0755"
- chowncmd=
--mvcmd=$mvprog
--rmcmd="$rmprog -f"
-+chgrpcmd=
- stripcmd=
--
-+rmcmd="$rmprog -f"
-+mvcmd="$mvprog"
- src=
- dst=
- dir_arg=
--dst_arg=
--
--copy_on_change=false
-+dstarg=
- no_target_directory=
- 
--usage="\
--Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-    or: $0 [OPTION]... SRCFILES... DIRECTORY
-    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-    or: $0 [OPTION]... -d DIRECTORIES...
-@@ -110,86 +80,81 @@ In the 2nd and 3rd, copy all SRCFILES to
- In the 4th, create DIRECTORIES.
- 
- Options:
--     --help     display this help and exit.
--     --version  display version info and exit.
--
--  -c            (ignored)
--  -C            install only if different (preserve the last data modification time)
--  -d            create directories instead of installing files.
--  -g GROUP      $chgrpprog installed files to GROUP.
--  -m MODE       $chmodprog installed files to MODE.
--  -o USER       $chownprog installed files to USER.
--  -s            $stripprog installed files.
--  -t DIRECTORY  install into DIRECTORY.
--  -T            report an error if DSTFILE is a directory.
-+-c         (ignored)
-+-d         create directories instead of installing files.
-+-g GROUP   $chgrpprog installed files to GROUP.
-+-m MODE    $chmodprog installed files to MODE.
-+-o USER    $chownprog installed files to USER.
-+-s         $stripprog installed files.
-+-t DIRECTORY  install into DIRECTORY.
-+-T         report an error if DSTFILE is a directory.
-+--help     display this help and exit.
-+--version  display version info and exit.
- 
- Environment variables override the default commands:
--  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
--  RMPROG STRIPPROG
-+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
- "
- 
--while test $# -ne 0; do
-+while test -n "$1"; do
-   case $1 in
--    -c) ;;
--
--    -C) copy_on_change=true;;
-+    -c) shift
-+        continue;;
- 
--    -d) dir_arg=true;;
-+    -d) dir_arg=true
-+        shift
-+        continue;;
- 
-     -g) chgrpcmd="$chgrpprog $2"
--	shift;;
-+        shift
-+        shift
-+        continue;;
- 
-     --help) echo "$usage"; exit $?;;
- 
--    -m) mode=$2
--	case $mode in
--	  *' '* | *'	'* | *'
--'*	  | *'*'* | *'?'* | *'['*)
--	    echo "$0: invalid mode: $mode" >&2
--	    exit 1;;
--	esac
--	shift;;
-+    -m) chmodcmd="$chmodprog $2"
-+        shift
-+        shift
-+        continue;;
- 
-     -o) chowncmd="$chownprog $2"
--	shift;;
-+        shift
-+        shift
-+        continue;;
- 
--    -s) stripcmd=$stripprog;;
-+    -s) stripcmd=$stripprog
-+        shift
-+        continue;;
- 
--    -t) dst_arg=$2
--	shift;;
-+    -t) dstarg=$2
-+	shift
-+	shift
-+	continue;;
- 
--    -T) no_target_directory=true;;
-+    -T) no_target_directory=true
-+	shift
-+	continue;;
- 
-     --version) echo "$0 $scriptversion"; exit $?;;
- 
--    --)	shift
-+    *)  # When -d is used, all remaining arguments are directories to create.
-+	# When -t is used, the destination is already specified.
-+	test -n "$dir_arg$dstarg" && break
-+        # Otherwise, the last argument is the destination.  Remove it from $@.
-+	for arg
-+	do
-+          if test -n "$dstarg"; then
-+	    # $@ is not empty: it contains at least $arg.
-+	    set fnord "$@" "$dstarg"
-+	    shift # fnord
-+	  fi
-+	  shift # arg
-+	  dstarg=$arg
-+	done
- 	break;;
--
--    -*)	echo "$0: invalid option: $1" >&2
--	exit 1;;
--
--    *)  break;;
-   esac
--  shift
- done
- 
--if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
--  # When -d is used, all remaining arguments are directories to create.
--  # When -t is used, the destination is already specified.
--  # Otherwise, the last argument is the destination.  Remove it from $@.
--  for arg
--  do
--    if test -n "$dst_arg"; then
--      # $@ is not empty: it contains at least $arg.
--      set fnord "$@" "$dst_arg"
--      shift # fnord
--    fi
--    shift # arg
--    dst_arg=$arg
--  done
--fi
--
--if test $# -eq 0; then
-+if test -z "$1"; then
-   if test -z "$dir_arg"; then
-     echo "$0: no input file specified." >&2
-     exit 1
-@@ -199,47 +164,24 @@ if test $# -eq 0; then
-   exit 0
- fi
- 
--if test -z "$dir_arg"; then
--  trap '(exit $?); exit' 1 2 13 15
--
--  # Set umask so as not to create temps with too-generous modes.
--  # However, 'strip' requires both read and write access to temps.
--  case $mode in
--    # Optimize common cases.
--    *644) cp_umask=133;;
--    *755) cp_umask=22;;
--
--    *[0-7])
--      if test -z "$stripcmd"; then
--	u_plus_rw=
--      else
--	u_plus_rw='% 200'
--      fi
--      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
--    *)
--      if test -z "$stripcmd"; then
--	u_plus_rw=
--      else
--	u_plus_rw=,u+rw
--      fi
--      cp_umask=$mode$u_plus_rw;;
--  esac
--fi
--
- for src
- do
-   # Protect names starting with `-'.
-   case $src in
--    -*) src=./$src;;
-+    -*) src=./$src ;;
-   esac
- 
-   if test -n "$dir_arg"; then
-     dst=$src
--    dstdir=$dst
--    test -d "$dstdir"
--    dstdir_status=$?
--  else
-+    src=
- 
-+    if test -d "$dst"; then
-+      mkdircmd=:
-+      chmodcmd=
-+    else
-+      mkdircmd=$mkdirprog
-+    fi
-+  else
-     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-     # might cause directories to be created, which would be especially bad
-     # if $src (and thus $dsttmp) contains '*'.
-@@ -248,199 +190,71 @@ do
-       exit 1
-     fi
- 
--    if test -z "$dst_arg"; then
-+    if test -z "$dstarg"; then
-       echo "$0: no destination specified." >&2
-       exit 1
-     fi
- 
--    dst=$dst_arg
-+    dst=$dstarg
-     # Protect names starting with `-'.
-     case $dst in
--      -*) dst=./$dst;;
-+      -*) dst=./$dst ;;
-     esac
- 
-     # If destination is a directory, append the input filename; won't work
-     # if double slashes aren't ignored.
-     if test -d "$dst"; then
-       if test -n "$no_target_directory"; then
--	echo "$0: $dst_arg: Is a directory" >&2
-+	echo "$0: $dstarg: Is a directory" >&2
- 	exit 1
-       fi
--      dstdir=$dst
--      dst=$dstdir/`basename "$src"`
--      dstdir_status=0
--    else
--      # Prefer dirname, but fall back on a substitute if dirname fails.
--      dstdir=`
--	(dirname "$dst") 2>/dev/null ||
--	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
--	     X"$dst" : 'X\(//\)[^/]' \| \
--	     X"$dst" : 'X\(//\)$' \| \
--	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
--	echo X"$dst" |
--	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
--		   s//\1/
--		   q
--		 }
--		 /^X\(\/\/\)[^/].*/{
--		   s//\1/
--		   q
--		 }
--		 /^X\(\/\/\)$/{
--		   s//\1/
--		   q
--		 }
--		 /^X\(\/\).*/{
--		   s//\1/
--		   q
--		 }
--		 s/.*/./; q'
--      `
--
--      test -d "$dstdir"
--      dstdir_status=$?
-+      dst=$dst/`basename "$src"`
-     fi
-   fi
- 
--  obsolete_mkdir_used=false
--
--  if test $dstdir_status != 0; then
--    case $posix_mkdir in
--      '')
--	# Create intermediate dirs using mode 755 as modified by the umask.
--	# This is like FreeBSD 'install' as of 1997-10-28.
--	umask=`umask`
--	case $stripcmd.$umask in
--	  # Optimize common cases.
--	  *[2367][2367]) mkdir_umask=$umask;;
--	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
--
--	  *[0-7])
--	    mkdir_umask=`expr $umask + 22 \
--	      - $umask % 100 % 40 + $umask % 20 \
--	      - $umask % 10 % 4 + $umask % 2
--	    `;;
--	  *) mkdir_umask=$umask,go-w;;
--	esac
--
--	# With -d, create the new directory with the user-specified mode.
--	# Otherwise, rely on $mkdir_umask.
--	if test -n "$dir_arg"; then
--	  mkdir_mode=-m$mode
--	else
--	  mkdir_mode=
--	fi
--
--	posix_mkdir=false
--	case $umask in
--	  *[123567][0-7][0-7])
--	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
--	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
--	    ;;
--	  *)
--	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
--	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
--
--	    if (umask $mkdir_umask &&
--		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
--	    then
--	      if test -z "$dir_arg" || {
--		   # Check for POSIX incompatibilities with -m.
--		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
--		   # other-writeable bit of parent directory when it shouldn't.
--		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
--		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
--		   case $ls_ld_tmpdir in
--		     d????-?r-*) different_mode=700;;
--		     d????-?--*) different_mode=755;;
--		     *) false;;
--		   esac &&
--		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
--		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
--		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
--		   }
--		 }
--	      then posix_mkdir=:
--	      fi
--	      rmdir "$tmpdir/d" "$tmpdir"
--	    else
--	      # Remove any dirs left behind by ancient mkdir implementations.
--	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
--	    fi
--	    trap '' 0;;
--	esac;;
--    esac
-+  # This sed command emulates the dirname command.
-+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
- 
--    if
--      $posix_mkdir && (
--	umask $mkdir_umask &&
--	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
--      )
--    then :
--    else
-+  # Make sure that the destination directory exists.
- 
--      # The umask is ridiculous, or mkdir does not conform to POSIX,
--      # or it failed possibly due to a race condition.  Create the
--      # directory the slow way, step by step, checking for races as we go.
-+  # Skip lots of stat calls in the usual case.
-+  if test ! -d "$dstdir"; then
-+    defaultIFS='
-+	 '
-+    IFS="${IFS-$defaultIFS}"
- 
--      case $dstdir in
--	/*) prefix='/';;
--	-*) prefix='./';;
--	*)  prefix='';;
--      esac
-+    oIFS=$IFS
-+    # Some sh's can't handle IFS=/ for some reason.
-+    IFS='%'
-+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-+    shift
-+    IFS=$oIFS
- 
--      eval "$initialize_posix_glob"
-+    pathcomp=
- 
--      oIFS=$IFS
--      IFS=/
--      $posix_glob set -f
--      set fnord $dstdir
-+    while test $# -ne 0 ; do
-+      pathcomp=$pathcomp$1
-       shift
--      $posix_glob set +f
--      IFS=$oIFS
--
--      prefixes=
--
--      for d
--      do
--	test -z "$d" && continue
--
--	prefix=$prefix$d
--	if test -d "$prefix"; then
--	  prefixes=
--	else
--	  if $posix_mkdir; then
--	    (umask=$mkdir_umask &&
--	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
--	    # Don't fail if two instances are running concurrently.
--	    test -d "$prefix" || exit 1
--	  else
--	    case $prefix in
--	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
--	      *) qprefix=$prefix;;
--	    esac
--	    prefixes="$prefixes '$qprefix'"
--	  fi
--	fi
--	prefix=$prefix/
--      done
--
--      if test -n "$prefixes"; then
--	# Don't fail if two instances are running concurrently.
--	(umask $mkdir_umask &&
--	 eval "\$doit_exec \$mkdirprog $prefixes") ||
--	  test -d "$dstdir" || exit 1
--	obsolete_mkdir_used=true
-+      if test ! -d "$pathcomp"; then
-+        $mkdirprog "$pathcomp"
-+	# mkdir can fail with a `File exist' error in case several
-+	# install-sh are creating the directory concurrently.  This
-+	# is OK.
-+	test -d "$pathcomp" || exit
-       fi
--    fi
-+      pathcomp=$pathcomp/
-+    done
-   fi
- 
-   if test -n "$dir_arg"; then
--    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
--    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
--    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
--      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-+    $doit $mkdircmd "$dst" \
-+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-+
-   else
-+    dstfile=`basename "$dst"`
- 
-     # Make a couple of temp file names in the proper directory.
-     dsttmp=$dstdir/_inst.$$_
-@@ -448,9 +262,10 @@ do
- 
-     # Trap to clean up those temp files at exit.
-     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-+    trap '(exit $?); exit' 1 2 13 15
- 
-     # Copy the file name to the temp name.
--    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-+    $doit $cpprog "$src" "$dsttmp" &&
- 
-     # and set any options; do chmod last to preserve setuid bits.
-     #
-@@ -458,59 +273,48 @@ do
-     # ignore errors from any of these, just make sure not to ignore
-     # errors from the above "$doit $cpprog $src $dsttmp" command.
-     #
--    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
--    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
--    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
--    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
--
--    # If -C, don't bother to copy if it wouldn't change the file.
--    if $copy_on_change &&
--       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
--       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
--
--       eval "$initialize_posix_glob" &&
--       $posix_glob set -f &&
--       set X $old && old=:$2:$4:$5:$6 &&
--       set X $new && new=:$2:$4:$5:$6 &&
--       $posix_glob set +f &&
--
--       test "$old" = "$new" &&
--       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
--    then
--      rm -f "$dsttmp"
--    else
--      # Rename the file to the real destination.
--      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
- 
--      # The rename failed, perhaps because mv can't rename something else
--      # to itself, or perhaps because mv is so ancient that it does not
--      # support -f.
--      {
--	# Now remove or move aside any old file at destination location.
--	# We try this two ways since rm can't unlink itself on some
--	# systems and the destination file might be busy for other
--	# reasons.  In this case, the final cleanup might fail but the new
--	# file should still install successfully.
--	{
--	  test ! -f "$dst" ||
--	  $doit $rmcmd -f "$dst" 2>/dev/null ||
--	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
--	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
--	  } ||
--	  { echo "$0: cannot unlink or rename $dst" >&2
--	    (exit 1); exit 1
--	  }
--	} &&
-+    # Now rename the file to the real destination.
-+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-+      || {
-+	   # The rename failed, perhaps because mv can't rename something else
-+	   # to itself, or perhaps because mv is so ancient that it does not
-+	   # support -f.
- 
--	# Now rename the file to the real destination.
--	$doit $mvcmd "$dsttmp" "$dst"
--      }
--    fi || exit 1
-+	   # Now remove or move aside any old file at destination location.
-+	   # We try this two ways since rm can't unlink itself on some
-+	   # systems and the destination file might be busy for other
-+	   # reasons.  In this case, the final cleanup might fail but the new
-+	   # file should still install successfully.
-+	   {
-+	     if test -f "$dstdir/$dstfile"; then
-+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-+	       || {
-+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-+		 (exit 1); exit 1
-+	       }
-+	     else
-+	       :
-+	     fi
-+	   } &&
- 
--    trap '' 0
--  fi
-+	   # Now rename the file to the real destination.
-+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-+	 }
-+    }
-+  fi || { (exit 1); exit 1; }
- done
- 
-+# The final little trick to "correctly" pass the exit status to the exit trap.
-+{
-+  (exit 0); exit 0
-+}
-+
- # Local variables:
- # eval: (add-hook 'write-file-hooks 'time-stamp)
- # time-stamp-start: "scriptversion="