tac not available on FreeBSD, fix permission in tslib package

3 files changed, 1310 insertions, 1304 deletions

diff --git a/package/tslib/Makefile b/package/tslib/Makefile
index 5f384b7f6..2ebd83179 100644
--- a/package/tslib/Makefile
+++ b/package/tslib/Makefile
@@ -27,6 +27,9 @@ CONFIGURE_ARGS+=	--disable-ucb1x00 \
 			--disable-linear-h2200 \
 			--disable-arctic2
 
+pre-build:
+	@chmod u+x ${WRKBUILD}/install-sh
+
 post-install:
 	$(INSTALL_DIR) $(IDIR_TSLIB)/etc
 	$(INSTALL_DIR) $(IDIR_TSLIB)/usr/lib/ts
diff --git a/package/tslib/patches/autotool.patch b/package/tslib/patches/autotool.patch
index 803f41800..c72fd2dc1 100644
--- a/package/tslib/patches/autotool.patch
+++ b/package/tslib/patches/autotool.patch
@@ -1,6 +1,1203 @@
+diff -Nur tslib-1.0.orig/INSTALL tslib-1.0/INSTALL
+--- tslib-1.0.orig/INSTALL	2006-08-24 23:02:55.000000000 +0200
++++ tslib-1.0/INSTALL	2010-07-29 13:39:15.000000000 +0200
+@@ -1,16 +1,25 @@
+ Installation Instructions
+ *************************
+ 
+-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
+-Software Foundation, Inc.
++Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
++2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ 
+-This file is free documentation; the Free Software Foundation gives
+-unlimited permission to copy, distribute and modify it.
++   Copying and distribution of this file, with or without modification,
++are permitted in any medium without royalty provided the copyright
++notice and this notice are preserved.  This file is offered as-is,
++without warranty of any kind.
+ 
+ Basic Installation
+ ==================
+ 
+-These are generic installation instructions.
++   Briefly, the shell commands `./configure; make; make install' should
++configure, build, and install this package.  The following
++more-detailed instructions are generic; see the `README' file for
++instructions specific to this package.  Some packages provide this
++`INSTALL' file but do not implement all of the features documented
++below.  The lack of an optional feature in a given package is not
++necessarily a bug.  More recommendations for GNU packages can be found
++in *note Makefile Conventions: (standards)Makefile Conventions.
+ 
+    The `configure' shell script attempts to guess correct values for
+ various system-dependent variables used during compilation.  It uses
+@@ -23,9 +32,9 @@
+ 
+    It can also use an optional file (typically called `config.cache'
+ and enabled with `--cache-file=config.cache' or simply `-C') that saves
+-the results of its tests to speed up reconfiguring.  (Caching is
++the results of its tests to speed up reconfiguring.  Caching is
+ disabled by default to prevent problems with accidental use of stale
+-cache files.)
++cache files.
+ 
+    If you need to do unusual things to compile the package, please try
+ to figure out how `configure' could check whether to do them, and mail
+@@ -35,30 +44,37 @@
+ may remove or edit it.
+ 
+    The file `configure.ac' (or `configure.in') is used to create
+-`configure' by a program called `autoconf'.  You only need
+-`configure.ac' if you want to change it or regenerate `configure' using
+-a newer version of `autoconf'.
++`configure' by a program called `autoconf'.  You need `configure.ac' if
++you want to change it or regenerate `configure' using a newer version
++of `autoconf'.
+ 
+-The simplest way to compile this package is:
++   The simplest way to compile this package is:
+ 
+   1. `cd' to the directory containing the package's source code and type
+-     `./configure' to configure the package for your system.  If you're
+-     using `csh' on an old version of System V, you might need to type
+-     `sh ./configure' instead to prevent `csh' from trying to execute
+-     `configure' itself.
++     `./configure' to configure the package for your system.
+ 
+-     Running `configure' takes awhile.  While running, it prints some
+-     messages telling which features it is checking for.
++     Running `configure' might take a while.  While running, it prints
++     some messages telling which features it is checking for.
+ 
+   2. Type `make' to compile the package.
+ 
+   3. Optionally, type `make check' to run any self-tests that come with
+-     the package.
++     the package, generally using the just-built uninstalled binaries.
+ 
+   4. Type `make install' to install the programs and any data files and
+-     documentation.
++     documentation.  When installing into a prefix owned by root, it is
++     recommended that the package be configured and built as a regular
++     user, and only the `make install' phase executed with root
++     privileges.
++
++  5. Optionally, type `make installcheck' to repeat any self-tests, but
++     this time using the binaries in their final installed location.
++     This target does not install anything.  Running this target as a
++     regular user, particularly if the prior `make install' required
++     root privileges, verifies that the installation completed
++     correctly.
+ 
+-  5. You can remove the program binaries and object files from the
++  6. You can remove the program binaries and object files from the
+      source code directory by typing `make clean'.  To also remove the
+      files that `configure' created (so you can compile the package for
+      a different kind of computer), type `make distclean'.  There is
+@@ -67,65 +83,120 @@
+      all sorts of other programs in order to regenerate files that came
+      with the distribution.
+ 
++  7. Often, you can also type `make uninstall' to remove the installed
++     files again.  In practice, not all packages have tested that
++     uninstallation works correctly, even though it is required by the
++     GNU Coding Standards.
++
++  8. Some packages, particularly those that use Automake, provide `make
++     distcheck', which can by used by developers to test that all other
++     targets like `make install' and `make uninstall' work correctly.
++     This target is generally not run by end users.
++
+ Compilers and Options
+ =====================
+ 
+-Some systems require unusual options for compilation or linking that the
+-`configure' script does not know about.  Run `./configure --help' for
+-details on some of the pertinent environment variables.
++   Some systems require unusual options for compilation or linking that
++the `configure' script does not know about.  Run `./configure --help'
++for details on some of the pertinent environment variables.
+ 
+    You can give `configure' initial values for configuration parameters
+ by setting variables in the command line or in the environment.  Here
+ is an example:
+ 
+-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
++     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+ 
+    *Note Defining Variables::, for more details.
+ 
+ Compiling For Multiple Architectures
+ ====================================
+ 
+-You can compile the package for more than one kind of computer at the
++   You can compile the package for more than one kind of computer at the
+ same time, by placing the object files for each architecture in their
+-own directory.  To do this, you must use a version of `make' that
+-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
++own directory.  To do this, you can use GNU `make'.  `cd' to the
+ directory where you want the object files and executables to go and run
+ the `configure' script.  `configure' automatically checks for the
+-source code in the directory that `configure' is in and in `..'.
++source code in the directory that `configure' is in and in `..'.  This
++is known as a "VPATH" build.
+ 
+-   If you have to use a `make' that does not support the `VPATH'
+-variable, you have to compile the package for one architecture at a
+-time in the source code directory.  After you have installed the
+-package for one architecture, use `make distclean' before reconfiguring
+-for another architecture.
++   With a non-GNU `make', it is safer to compile the package for one
++architecture at a time in the source code directory.  After you have
++installed the package for one architecture, use `make distclean' before
++reconfiguring for another architecture.
++
++   On MacOS X 10.5 and later systems, you can create libraries and
++executables that work on multiple system types--known as "fat" or
++"universal" binaries--by specifying multiple `-arch' options to the
++compiler but only a single `-arch' option to the preprocessor.  Like
++this:
++
++     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
++                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
++                 CPP="gcc -E" CXXCPP="g++ -E"
++
++   This is not guaranteed to produce working output in all cases, you
++may have to build one architecture at a time and combine the results
++using the `lipo' tool if you have problems.
+ 
+ Installation Names
+ ==================
+ 
+-By default, `make install' will install the package's files in
+-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+-installation prefix other than `/usr/local' by giving `configure' the
+-option `--prefix=PREFIX'.
++   By default, `make install' installs the package's commands under
++`/usr/local/bin', include files under `/usr/local/include', etc.  You
++can specify an installation prefix other than `/usr/local' by giving
++`configure' the option `--prefix=PREFIX', where PREFIX must be an
++absolute file name.
+ 
+    You can specify separate installation prefixes for
+ architecture-specific files and architecture-independent files.  If you
+-give `configure' the option `--exec-prefix=PREFIX', the package will
+-use PREFIX as the prefix for installing programs and libraries.
+-Documentation and other data files will still use the regular prefix.
++pass the option `--exec-prefix=PREFIX' to `configure', the package uses
++PREFIX as the prefix for installing programs and libraries.
++Documentation and other data files still use the regular prefix.
+ 
+    In addition, if you use an unusual directory layout you can give
+ options like `--bindir=DIR' to specify different values for particular
+ kinds of files.  Run `configure --help' for a list of the directories
+-you can set and what kinds of files go in them.
++you can set and what kinds of files go in them.  In general, the
++default for these options is expressed in terms of `${prefix}', so that
++specifying just `--prefix' will affect all of the other directory
++specifications that were not explicitly provided.
++
++   The most portable way to affect installation locations is to pass the
++correct locations to `configure'; however, many packages provide one or
++both of the following shortcuts of passing variable assignments to the
++`make install' command line to change installation locations without
++having to reconfigure or recompile.
++
++   The first method involves providing an override variable for each
++affected directory.  For example, `make install
++prefix=/alternate/directory' will choose an alternate location for all
++directory configuration variables that were expressed in terms of
++`${prefix}'.  Any directories that were specified during `configure',
++but not in terms of `${prefix}', must each be overridden at install
++time for the entire installation to be relocated.  The approach of
++makefile variable overrides for each directory variable is required by
++the GNU Coding Standards, and ideally causes no recompilation.
++However, some platforms have known limitations with the semantics of
++shared libraries that end up requiring recompilation when using this
++method, particularly noticeable in packages that use GNU Libtool.
++
++   The second method involves providing the `DESTDIR' variable.  For
++example, `make install DESTDIR=/alternate/directory' will prepend
++`/alternate/directory' before all installation names.  The approach of
++`DESTDIR' overrides is not required by the GNU Coding Standards, and
++does not work on platforms that have drive letters.  On the other hand,
++it does better at avoiding recompilation issues, and works well even
++when some directory options were not specified in terms of `${prefix}'
++at `configure' time.
++
++Optional Features
++=================
+ 
+    If the package supports it, you can cause programs to be installed
+ with an extra prefix or suffix on their names by giving `configure' the
+ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+ 
+-Optional Features
+-=================
+-
+-Some packages pay attention to `--enable-FEATURE' options to
++   Some packages pay attention to `--enable-FEATURE' options to
+ `configure', where FEATURE indicates an optional part of the package.
+ They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+ is something like `gnu-as' or `x' (for the X Window System).  The
+@@ -137,14 +208,53 @@
+ you can use the `configure' options `--x-includes=DIR' and
+ `--x-libraries=DIR' to specify their locations.
+ 
++   Some packages offer the ability to configure how verbose the
++execution of `make' will be.  For these packages, running `./configure
++--enable-silent-rules' sets the default to minimal output, which can be
++overridden with `make V=1'; while running `./configure
++--disable-silent-rules' sets the default to verbose, which can be
++overridden with `make V=0'.
++
++Particular systems
++==================
++
++   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
++CC is not installed, it is recommended to use the following options in
++order to use an ANSI C compiler:
++
++     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
++
++and if that doesn't work, install pre-built binaries of GCC for HP-UX.
++
++   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
++parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
++a workaround.  If GNU CC is not installed, it is therefore recommended
++to try
++
++     ./configure CC="cc"
++
++and if that doesn't work, try
++
++     ./configure CC="cc -nodtk"
++
++   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
++directory contains several dysfunctional programs; working variants of
++these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
++in your `PATH', put it _after_ `/usr/bin'.
++
++   On Haiku, software installed for all users goes in `/boot/common',
++not `/usr/local'.  It is recommended to use the following options:
++
++     ./configure --prefix=/boot/common
++
+ Specifying the System Type
+ ==========================
+ 
+-There may be some features `configure' cannot figure out automatically,
+-but needs to determine by the type of machine the package will run on.
+-Usually, assuming the package is built to be run on the _same_
+-architectures, `configure' can figure that out, but if it prints a
+-message saying it cannot guess the machine type, give it the
++   There may be some features `configure' cannot figure out
++automatically, but needs to determine by the type of machine the package
++will run on.  Usually, assuming the package is built to be run on the
++_same_ architectures, `configure' can figure that out, but if it prints
++a message saying it cannot guess the machine type, give it the
+ `--build=TYPE' option.  TYPE can either be a short name for the system
+ type, such as `sun4', or a canonical name which has the form:
+ 
+@@ -152,14 +262,15 @@
+ 
+ where SYSTEM can have one of these forms:
+ 
+-     OS KERNEL-OS
++     OS
++     KERNEL-OS
+ 
+    See the file `config.sub' for the possible values of each field.  If
+ `config.sub' isn't included in this package, then this package doesn't
+ need to know the machine type.
+ 
+    If you are _building_ compiler tools for cross-compiling, you should
+-use the `--target=TYPE' option to select the type of system they will
++use the option `--target=TYPE' to select the type of system they will
+ produce code for.
+ 
+    If you want to _use_ a cross compiler, that generates code for a
+@@ -170,9 +281,9 @@
+ Sharing Defaults
+ ================
+ 
+-If you want to set default values for `configure' scripts to share, you
+-can create a site shell script called `config.site' that gives default
+-values for variables like `CC', `cache_file', and `prefix'.
++   If you want to set default values for `configure' scripts to share,
++you can create a site shell script called `config.site' that gives
++default values for variables like `CC', `cache_file', and `prefix'.
+ `configure' looks for `PREFIX/share/config.site' if it exists, then
+ `PREFIX/etc/config.site' if it exists.  Or, you can set the
+ `CONFIG_SITE' environment variable to the location of the site script.
+@@ -181,7 +292,7 @@
+ Defining Variables
+ ==================
+ 
+-Variables not defined in a site shell script can be set in the
++   Variables not defined in a site shell script can be set in the
+ environment passed to `configure'.  However, some packages may run
+ configure again during the build, and the customized values of these
+ variables may be lost.  In order to avoid this problem, you should set
+@@ -189,17 +300,30 @@
+ 
+      ./configure CC=/usr/local2/bin/gcc
+ 
+-will cause the specified gcc to be used as the C compiler (unless it is
++causes the specified `gcc' to be used as the C compiler (unless it is
+ overridden in the site shell script).
+ 
++Unfortunately, this technique does not work for `CONFIG_SHELL' due to
++an Autoconf bug.  Until the bug is fixed you can use this workaround:
++
++     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
++
+ `configure' Invocation
+ ======================
+ 
+-`configure' recognizes the following options to control how it operates.
++   `configure' recognizes the following options to control how it
++operates.
+ 
+ `--help'
+ `-h'
+-     Print a summary of the options to `configure', and exit.
++     Print a summary of all of the options to `configure', and exit.
++
++`--help=short'
++`--help=recursive'
++     Print a summary of the options unique to this package's
++     `configure', and exit.  The `short' variant lists options used
++     only in the top level, while the `recursive' variant lists options
++     also present in any nested packages.
+ 
+ `--version'
+ `-V'
+@@ -226,6 +350,16 @@
+      Look for the package's source code in directory DIR.  Usually
+      `configure' can determine that directory automatically.
+ 
++`--prefix=DIR'
++     Use DIR as the installation prefix.  *note Installation Names::
++     for more details, including other options available for fine-tuning
++     the installation locations.
++
++`--no-create'
++`-n'
++     Run the configure checks, but stop before creating any output
++     files.
++
+ `configure' also accepts some other, not widely useful, options.  Run
+ `configure --help' for more details.
+ 
+diff -Nur tslib-1.0.orig/Makefile.in tslib-1.0/Makefile.in
+--- tslib-1.0.orig/Makefile.in	1970-01-01 01:00:00.000000000 +0100
++++ tslib-1.0/Makefile.in	2010-07-29 13:39:16.000000000 +0200
+@@ -0,0 +1,800 @@
++# Makefile.in generated by automake 1.11.1 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
++# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
++# Inc.
++# This Makefile.in is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++@SET_MAKE@
++
++#
++#  tslib/Makefile.am
++#
++#  Copyright (C) 2001 Russell King.
++#
++# This file is placed under the LGPL.  Please see the file
++# COPYING for more details.
++#
++# $Id: Makefile.am,v 1.3 2005/02/28 18:56:09 kergoth Exp $
++#
++
++VPATH = @srcdir@
++pkgdatadir = $(datadir)/@PACKAGE@
++pkgincludedir = $(includedir)/@PACKAGE@
++pkglibdir = $(libdir)/@PACKAGE@
++pkglibexecdir = $(libexecdir)/@PACKAGE@
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
++NORMAL_INSTALL = :
++PRE_INSTALL = :
++POST_INSTALL = :
++NORMAL_UNINSTALL = :
++PRE_UNINSTALL = :
++POST_UNINSTALL = :
++build_triplet = @build@
++host_triplet = @host@
++subdir = .
++DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
++	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
++	$(srcdir)/tslib.pc.in $(top_srcdir)/configure AUTHORS COPYING \
++	ChangeLog INSTALL NEWS config.guess config.sub depcomp \
++	install-sh ltmain.sh missing
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/m4/internal/libtool.m4 \
++	$(top_srcdir)/m4/internal/ltoptions.m4 \
++	$(top_srcdir)/m4/internal/ltsugar.m4 \
++	$(top_srcdir)/m4/internal/ltversion.m4 \
++	$(top_srcdir)/m4/internal/lt~obsolete.m4 \
++	$(top_srcdir)/m4/internal/visibility.m4 \
++	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++	$(ACLOCAL_M4)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno config.status.lineno
++mkinstalldirs = $(install_sh) -d
++CONFIG_HEADER = config.h
++CONFIG_CLEAN_FILES =
++CONFIG_CLEAN_VPATH_FILES =
++SOURCES =
++DIST_SOURCES =
++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
++	html-recursive info-recursive install-data-recursive \
++	install-dvi-recursive install-exec-recursive \
++	install-html-recursive install-info-recursive \
++	install-pdf-recursive install-ps-recursive install-recursive \
++	installcheck-recursive installdirs-recursive pdf-recursive \
++	ps-recursive uninstall-recursive
++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
++am__vpath_adj = case $$p in \
++    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
++    *) f=$$p;; \
++  esac;
++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
++am__install_max = 40
++am__nobase_strip_setup = \
++  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
++am__nobase_strip = \
++  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
++am__nobase_list = $(am__nobase_strip_setup); \
++  for p in $$list; do echo "$$p $$p"; done | \
++  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
++  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
++    if (++n[$$2] == $(am__install_max)) \
++      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
++    END { for (dir in files) print dir, files[dir] }'
++am__base_list = \
++  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
++  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
++am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
++DATA = $(pkgconfig_DATA)
++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
++  distclean-recursive maintainer-clean-recursive
++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
++	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
++	distdir dist dist-all distcheck
++ETAGS = etags
++CTAGS = ctags
++DIST_SUBDIRS = $(SUBDIRS)
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++  { test ! -d "$(distdir)" \
++    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
++         && rm -fr "$(distdir)"; }; }
++am__relativize = \
++  dir0=`pwd`; \
++  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
++  sed_rest='s,^[^/]*/*,,'; \
++  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
++  sed_butlast='s,/*[^/]*$$,,'; \
++  while test -n "$$dir1"; do \
++    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
++    if test "$$first" != "."; then \
++      if test "$$first" = ".."; then \
++        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
++        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
++      else \
++        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
++        if test "$$first2" = "$$first"; then \
++          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
++        else \
++          dir2="../$$dir2"; \
++        fi; \
++        dir0="$$dir0"/"$$first"; \
++      fi; \
++    fi; \
++    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
++  done; \
++  reldir="$$dir2"
++DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
++GZIP_ENV = --best
++distuninstallcheck_listfiles = find . -type f -print
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
++ALLOCA = @ALLOCA@
++AMTAR = @AMTAR@
++AR = @AR@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
++CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
++CPP = @CPP@
++CPPFLAGS = @CPPFLAGS@
++CXX = @CXX@
++CXXCPP = @CXXCPP@
++CXXDEPMODE = @CXXDEPMODE@
++CXXFLAGS = @CXXFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEBUGFLAGS = @DEBUGFLAGS@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++DSYMUTIL = @DSYMUTIL@
++DUMPBIN = @DUMPBIN@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
++EXEEXT = @EXEEXT@
++FGREP = @FGREP@
++GREP = @GREP@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
++LD = @LD@
++LDFLAGS = @LDFLAGS@
++LIBFLAGS = @LIBFLAGS@
++LIBOBJS = @LIBOBJS@
++LIBS = @LIBS@
++LIBTOOL = @LIBTOOL@
++LIPO = @LIPO@
++LN_S = @LN_S@
++LTLIBOBJS = @LTLIBOBJS@
++LT_AGE = @LT_AGE@
++LT_CURRENT = @LT_CURRENT@
++LT_RELEASE = @LT_RELEASE@
++LT_REVISION = @LT_REVISION@
++MAKEINFO = @MAKEINFO@
++MKDIR_P = @MKDIR_P@
++NM = @NM@
++NMEDIT = @NMEDIT@
++OBJDUMP = @OBJDUMP@
++OBJEXT = @OBJEXT@
++OTOOL = @OTOOL@
++OTOOL64 = @OTOOL64@
++PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_DESCRIPTION = @PACKAGE_DESCRIPTION@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
++PACKAGE_VERSION = @PACKAGE_VERSION@
++PATH_SEPARATOR = @PATH_SEPARATOR@
++PLUGIN_DIR = @PLUGIN_DIR@
++RANLIB = @RANLIB@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
++TS_CONF = @TS_CONF@
++VERSION = @VERSION@
++VIS_CFLAGS = @VIS_CFLAGS@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_CC = @ac_ct_CC@
++ac_ct_CXX = @ac_ct_CXX@
++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++lt_ECHO = @lt_ECHO@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
++SUBDIRS = etc src plugins tests
++EXTRA_DIST = autogen.sh
++ACLOCAL_AMFLAGS = -I m4/internal -I m4/external
++AUTOMAKE_OPTIONS = 1.6
++pkgconfigdir = $(libdir)/pkgconfig
++pkgconfig_DATA = $(PACKAGE)-$(LT_RELEASE).pc
++all: config.h
++	$(MAKE) $(AM_MAKEFLAGS) all-recursive
++
++.SUFFIXES:
++am--refresh:
++	@:
++$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
++	@for dep in $?; do \
++	  case '$(am__configure_deps)' in \
++	    *$$dep*) \
++	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
++	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
++		&& exit 0; \
++	      exit 1;; \
++	  esac; \
++	done; \
++	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
++	$(am__cd) $(top_srcdir) && \
++	  $(AUTOMAKE) --gnu Makefile
++.PRECIOUS: Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++	@case '$?' in \
++	  *config.status*) \
++	    echo ' $(SHELL) ./config.status'; \
++	    $(SHELL) ./config.status;; \
++	  *) \
++	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
++	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
++	esac;
++
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++	$(SHELL) ./config.status --recheck
++
++$(top_srcdir)/configure:  $(am__configure_deps)
++	$(am__cd) $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
++	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
++$(am__aclocal_m4_deps):
++
++config.h: stamp-h1
++	@if test ! -f $@; then \
++	  rm -f stamp-h1; \
++	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
++	else :; fi
++
++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
++	@rm -f stamp-h1
++	cd $(top_builddir) && $(SHELL) ./config.status config.h
++$(srcdir)/config.h.in:  $(am__configure_deps) 
++	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
++	rm -f stamp-h1
++	touch $@
++
++distclean-hdr:
++	-rm -f config.h stamp-h1
++
++mostlyclean-libtool:
++	-rm -f *.lo
++
++clean-libtool:
++	-rm -rf .libs _libs
++
++distclean-libtool:
++	-rm -f libtool config.lt
++install-pkgconfigDATA: $(pkgconfig_DATA)
++	@$(NORMAL_INSTALL)
++	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
++	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
++	for p in $$list; do \
++	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
++	  echo "$$d$$p"; \
++	done | $(am__base_list) | \
++	while read files; do \
++	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
++	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
++	done
++
++uninstall-pkgconfigDATA:
++	@$(NORMAL_UNINSTALL)
++	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
++	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
++	test -n "$$files" || exit 0; \
++	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
++	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
++
++# This directory's subdirectories are mostly independent; you can cd
++# into them and run `make' without going through this Makefile.
++# To change the values of `make' variables: instead of editing Makefiles,
++# (1) if the variable is set in `config.status', edit `config.status'
++#     (which will cause the Makefiles to be regenerated when you run `make');
++# (2) otherwise, pass the desired values on the `make' command line.
++$(RECURSIVE_TARGETS):
++	@fail= failcom='exit 1'; \
++	for f in x $$MAKEFLAGS; do \
++	  case $$f in \
++	    *=* | --[!k]*);; \
++	    *k*) failcom='fail=yes';; \
++	  esac; \
++	done; \
++	dot_seen=no; \
++	target=`echo $@ | sed s/-recursive//`; \
++	list='$(SUBDIRS)'; for subdir in $$list; do \
++	  echo "Making $$target in $$subdir"; \
++	  if test "$$subdir" = "."; then \
++	    dot_seen=yes; \
++	    local_target="$$target-am"; \
++	  else \
++	    local_target="$$target"; \
++	  fi; \
++	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
++	  || eval $$failcom; \
++	done; \
++	if test "$$dot_seen" = "no"; then \
++	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
++	fi; test -z "$$fail"
++
++$(RECURSIVE_CLEAN_TARGETS):
++	@fail= failcom='exit 1'; \
++	for f in x $$MAKEFLAGS; do \
++	  case $$f in \
++	    *=* | --[!k]*);; \
++	    *k*) failcom='fail=yes';; \
++	  esac; \
++	done; \
++	dot_seen=no; \
++	case "$@" in \
++	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
++	  *) list='$(SUBDIRS)' ;; \
++	esac; \
++	rev=''; for subdir in $$list; do \
++	  if test "$$subdir" = "."; then :; else \
++	    rev="$$subdir $$rev"; \
++	  fi; \
++	done; \
++	rev="$$rev ."; \
++	target=`echo $@ | sed s/-recursive//`; \
++	for subdir in $$rev; do \
++	  echo "Making $$target in $$subdir"; \
++	  if test "$$subdir" = "."; then \
++	    local_target="$$target-am"; \
++	  else \
++	    local_target="$$target"; \
++	  fi; \
++	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
++	  || eval $$failcom; \
++	done && test -z "$$fail"
++tags-recursive:
++	list='$(SUBDIRS)'; for subdir in $$list; do \
++	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
++	done
++ctags-recursive:
++	list='$(SUBDIRS)'; for subdir in $$list; do \
++	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
++	done
++
++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
++	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++	unique=`for i in $$list; do \
++	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++	  done | \
++	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++	      END { if (nonempty) { for (i in files) print i; }; }'`; \
++	mkid -fID $$unique
++tags: TAGS
++
++TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
++		$(TAGS_FILES) $(LISP)
++	set x; \
++	here=`pwd`; \
++	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
++	  include_option=--etags-include; \
++	  empty_fix=.; \
++	else \
++	  include_option=--include; \
++	  empty_fix=; \
++	fi; \
++	list='$(SUBDIRS)'; for subdir in $$list; do \
++	  if test "$$subdir" = .; then :; else \
++	    test ! -f $$subdir/TAGS || \
++	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
++	  fi; \
++	done; \
++	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
++	unique=`for i in $$list; do \
++	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++	  done | \
++	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++	      END { if (nonempty) { for (i in files) print i; }; }'`; \
++	shift; \
++	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
++	  test -n "$$unique" || unique=$$empty_fix; \
++	  if test $$# -gt 0; then \
++	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++	      "$$@" $$unique; \
++	  else \
++	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++	      $$unique; \
++	  fi; \
++	fi
++ctags: CTAGS
++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
++		$(TAGS_FILES) $(LISP)
++	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
++	unique=`for i in $$list; do \
++	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++	  done | \
++	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++	      END { if (nonempty) { for (i in files) print i; }; }'`; \
++	test -z "$(CTAGS_ARGS)$$unique" \
++	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++	     $$unique
++
++GTAGS:
++	here=`$(am__cd) $(top_builddir) && pwd` \
++	  && $(am__cd) $(top_srcdir) \
++	  && gtags -i $(GTAGS_ARGS) "$$here"
++
++distclean-tags:
++	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
++
++distdir: $(DISTFILES)
++	$(am__remove_distdir)
++	test -d "$(distdir)" || mkdir "$(distdir)"
++	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++	list='$(DISTFILES)'; \
++	  dist_files=`for file in $$list; do echo $$file; done | \
++	  sed -e "s|^$$srcdirstrip/||;t" \
++	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++	case $$dist_files in \
++	  */*) $(MKDIR_P) `echo "$$dist_files" | \
++			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++			   sort -u` ;; \
++	esac; \
++	for file in $$dist_files; do \
++	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++	  if test -d $$d/$$file; then \
++	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++	    if test -d "$(distdir)/$$file"; then \
++	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++	    fi; \
++	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
++	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++	    fi; \
++	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++	  else \
++	    test -f "$(distdir)/$$file" \
++	    || cp -p $$d/$$file "$(distdir)/$$file" \
++	    || exit 1; \
++	  fi; \
++	done
++	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
++	  if test "$$subdir" = .; then :; else \
++	    test -d "$(distdir)/$$subdir" \
++	    || $(MKDIR_P) "$(distdir)/$$subdir" \
++	    || exit 1; \
++	  fi; \
++	done
++	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
++	  if test "$$subdir" = .; then :; else \
++	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
++	    $(am__relativize); \
++	    new_distdir=$$reldir; \
++	    dir1=$$subdir; dir2="$(top_distdir)"; \
++	    $(am__relativize); \
++	    new_top_distdir=$$reldir; \
++	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
++	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
++	    ($(am__cd) $$subdir && \
++	      $(MAKE) $(AM_MAKEFLAGS) \
++	        top_distdir="$$new_top_distdir" \
++	        distdir="$$new_distdir" \
++		am__remove_distdir=: \
++		am__skip_length_check=: \
++		am__skip_mode_fix=: \
++	        distdir) \
++	      || exit 1; \
++	  fi; \
++	done
++	-test -n "$(am__skip_mode_fix)" \
++	|| find "$(distdir)" -type d ! -perm -755 \
++		-exec chmod u+rwx,go+rx {} \; -o \
++	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
++	|| chmod -R a+r "$(distdir)"
++dist-gzip: distdir
++	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++	$(am__remove_distdir)
++dist-bzip2: distdir
++	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
++	$(am__remove_distdir)
++
++dist-lzma: distdir
++	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
++	$(am__remove_distdir)
++
++dist-xz: distdir
++	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
++	$(am__remove_distdir)
++
++dist-tarZ: distdir
++	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
++	$(am__remove_distdir)
++
++dist-shar: distdir
++	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
++	$(am__remove_distdir)
++
++dist-zip: distdir
++	-rm -f $(distdir).zip
++	zip -rq $(distdir).zip $(distdir)
++	$(am__remove_distdir)
++
++dist dist-all: distdir
++	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
++	$(am__remove_distdir)
++
++# This target untars the dist file and tries a VPATH configuration.  Then
++# it guarantees that the distribution is self-contained by making another
++# tarfile.
++distcheck: dist
++	case '$(DIST_ARCHIVES)' in \
++	*.tar.gz*) \
++	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
++	*.tar.bz2*) \
++	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
++	*.tar.lzma*) \
++	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
++	*.tar.xz*) \
++	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
++	*.tar.Z*) \
++	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
++	*.shar.gz*) \
++	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
++	*.zip*) \
++	  unzip $(distdir).zip ;;\
++	esac
++	chmod -R a-w $(distdir); chmod a+w $(distdir)
++	mkdir $(distdir)/_build
++	mkdir $(distdir)/_inst
++	chmod a-w $(distdir)
++	test -d $(distdir)/_build || exit 0; \
++	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++	  && am__cwd=`pwd` \
++	  && $(am__cd) $(distdir)/_build \
++	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
++	    $(DISTCHECK_CONFIGURE_FLAGS) \
++	  && $(MAKE) $(AM_MAKEFLAGS) \
++	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
++	  && $(MAKE) $(AM_MAKEFLAGS) check \
++	  && $(MAKE) $(AM_MAKEFLAGS) install \
++	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
++	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++	        distuninstallcheck \
++	  && chmod -R a-w "$$dc_install_base" \
++	  && ({ \
++	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
++	  && rm -rf "$$dc_destdir" \
++	  && $(MAKE) $(AM_MAKEFLAGS) dist \
++	  && rm -rf $(DIST_ARCHIVES) \
++	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
++	  && cd "$$am__cwd" \
++	  || exit 1
++	$(am__remove_distdir)
++	@(echo "$(distdir) archives ready for distribution: "; \
++	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
++distuninstallcheck:
++	@$(am__cd) '$(distuninstallcheck_dir)' \
++	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
++	   || { echo "ERROR: files left after uninstall:" ; \
++	        if test -n "$(DESTDIR)"; then \
++	          echo "  (check DESTDIR support)"; \
++	        fi ; \
++	        $(distuninstallcheck_listfiles) ; \
++	        exit 1; } >&2
++distcleancheck: distclean
++	@if test '$(srcdir)' = . ; then \
++	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++	  exit 1 ; \
++	fi
++	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++	  || { echo "ERROR: files left in build directory after distclean:" ; \
++	       $(distcleancheck_listfiles) ; \
++	       exit 1; } >&2
++check-am: all-am
++check: check-recursive
++all-am: Makefile $(DATA) config.h
++installdirs: installdirs-recursive
++installdirs-am:
++	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
++	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
++	done
++install: install-recursive
++install-exec: install-exec-recursive
++install-data: install-data-recursive
++uninstall: uninstall-recursive
++
++install-am: all-am
++	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
++
++installcheck: installcheck-recursive
++install-strip:
++	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++	  `test -z '$(STRIP)' || \
++	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
++mostlyclean-generic:
++
++clean-generic:
++
++distclean-generic:
++	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
++
++maintainer-clean-generic:
++	@echo "This command is intended for maintainers to use"
++	@echo "it deletes files that may require special tools to rebuild."
++clean: clean-recursive
++
++clean-am: clean-generic clean-libtool mostlyclean-am
++
++distclean: distclean-recursive
++	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
++	-rm -f Makefile
++distclean-am: clean-am distclean-generic distclean-hdr \
++	distclean-libtool distclean-tags
++
++dvi: dvi-recursive
++
++dvi-am:
++
++html: html-recursive
++
++html-am:
++
++info: info-recursive
++
++info-am:
++
++install-data-am: install-pkgconfigDATA
++
++install-dvi: install-dvi-recursive
++
++install-dvi-am:
++
++install-exec-am:
++
++install-html: install-html-recursive
++
++install-html-am:
++
++install-info: install-info-recursive
++
++install-info-am:
++
++install-man:
++
++install-pdf: install-pdf-recursive
++
++install-pdf-am:
++
++install-ps: install-ps-recursive
++
++install-ps-am:
++
++installcheck-am:
++
++maintainer-clean: maintainer-clean-recursive
++	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
++	-rm -rf $(top_srcdir)/autom4te.cache
++	-rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-recursive
++
++mostlyclean-am: mostlyclean-generic mostlyclean-libtool
++
++pdf: pdf-recursive
++
++pdf-am:
++
++ps: ps-recursive
++
++ps-am:
++
++uninstall-am: uninstall-pkgconfigDATA
++
++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
++	ctags-recursive install-am install-strip tags-recursive
++
++.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
++	all all-am am--refresh check check-am clean clean-generic \
++	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
++	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
++	distcheck distclean distclean-generic distclean-hdr \
++	distclean-libtool distclean-tags distcleancheck distdir \
++	distuninstallcheck dvi dvi-am html html-am info info-am \
++	install install-am install-data install-data-am install-dvi \
++	install-dvi-am install-exec install-exec-am install-html \
++	install-html-am install-info install-info-am install-man \
++	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
++	install-ps-am install-strip installcheck installcheck-am \
++	installdirs installdirs-am maintainer-clean \
++	maintainer-clean-generic mostlyclean mostlyclean-generic \
++	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
++	uninstall uninstall-am uninstall-pkgconfigDATA
++
++
++# Tell versions [3.59,3.63) of GNU make to not export all variables.
++# Otherwise a system limit (for SysV at least) may be exceeded.
++.NOEXPORT:
 diff -Nur tslib-1.0.orig/aclocal.m4 tslib-1.0/aclocal.m4
 --- tslib-1.0.orig/aclocal.m4	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/aclocal.m4	2010-02-19 00:24:08.800856345 +0100
++++ tslib-1.0/aclocal.m4	2010-07-29 13:39:11.000000000 +0200
 @@ -0,0 +1,970 @@
 +# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
 +
@@ -974,7 +2171,7 @@ diff -Nur tslib-1.0.orig/aclocal.m4 tslib-1.0/aclocal.m4
 +m4_include([acinclude.m4])
 diff -Nur tslib-1.0.orig/config.guess tslib-1.0/config.guess
 --- tslib-1.0.orig/config.guess	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/config.guess	2010-02-19 00:24:15.172857372 +0100
++++ tslib-1.0/config.guess	2010-07-29 13:39:11.000000000 +0200
 @@ -0,0 +1,1533 @@
 +#! /bin/sh
 +# Attempt to guess a canonical system name.
@@ -2511,7 +3708,7 @@ diff -Nur tslib-1.0.orig/config.guess tslib-1.0/config.guess
 +# End:
 diff -Nur tslib-1.0.orig/config.h.in tslib-1.0/config.h.in
 --- tslib-1.0.orig/config.h.in	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/config.h.in	2010-02-19 00:24:13.048855268 +0100
++++ tslib-1.0/config.h.in	2010-07-29 13:39:11.000000000 +0200
 @@ -0,0 +1,193 @@
 +/* config.h.in.  Generated from configure.ac by autoheader.  */
 +
@@ -2708,7 +3905,7 @@ diff -Nur tslib-1.0.orig/config.h.in tslib-1.0/config.h.in
 +#undef size_t
 diff -Nur tslib-1.0.orig/config.sub tslib-1.0/config.sub
 --- tslib-1.0.orig/config.sub	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/config.sub	2010-02-19 00:24:15.176867100 +0100
++++ tslib-1.0/config.sub	2010-07-29 13:39:11.000000000 +0200
 @@ -0,0 +1,1693 @@
 +#! /bin/sh
 +# Configuration validation subroutine script.
@@ -4405,7 +5602,7 @@ diff -Nur tslib-1.0.orig/config.sub tslib-1.0/config.sub
 +# End:
 diff -Nur tslib-1.0.orig/configure tslib-1.0/configure
 --- tslib-1.0.orig/configure	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/configure	2010-02-19 00:24:11.232851881 +0100
++++ tslib-1.0/configure	2010-07-29 13:39:15.000000000 +0200
 @@ -0,0 +1,18585 @@
 +#! /bin/sh
 +# Guess values for system-dependent variables and create Makefiles.
@@ -22994,7 +24191,7 @@ diff -Nur tslib-1.0.orig/configure tslib-1.0/configure
 +
 diff -Nur tslib-1.0.orig/configure.ac tslib-1.0/configure.ac
 --- tslib-1.0.orig/configure.ac	2006-08-24 23:02:55.000000000 +0200
-+++ tslib-1.0/configure.ac	2010-02-19 00:23:49.132856748 +0100
++++ tslib-1.0/configure.ac	2010-07-29 13:39:15.000000000 +0200
 @@ -71,7 +71,7 @@
  AM_CONDITIONAL(ENABLE_DEJITTER_MODULE, test "$dejitter_module" = "yes")
  
@@ -23006,7 +24203,7 @@ diff -Nur tslib-1.0.orig/configure.ac tslib-1.0/configure.ac
  	[h2200_linear_module=$enableval],
 diff -Nur tslib-1.0.orig/depcomp tslib-1.0/depcomp
 --- tslib-1.0.orig/depcomp	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/depcomp	2010-02-19 00:24:15.740856531 +0100
++++ tslib-1.0/depcomp	2010-07-29 13:39:15.000000000 +0200
 @@ -0,0 +1,630 @@
 +#! /bin/sh
 +# depcomp - compile a program generating dependencies as side-effects
@@ -23640,7 +24837,7 @@ diff -Nur tslib-1.0.orig/depcomp tslib-1.0/depcomp
 +# End:
 diff -Nur tslib-1.0.orig/etc/Makefile.in tslib-1.0/etc/Makefile.in
 --- tslib-1.0.orig/etc/Makefile.in	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/etc/Makefile.in	2010-02-19 00:24:15.300852155 +0100
++++ tslib-1.0/etc/Makefile.in	2010-07-29 13:39:38.000000000 +0200
 @@ -0,0 +1,430 @@
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
 +# @configure_input@
@@ -23901,7 +25098,7 @@ diff -Nur tslib-1.0.orig/etc/Makefile.in tslib-1.0/etc/Makefile.in
 +	-rm -rf .libs _libs
 +install-sysconfDATA: $(sysconf_DATA)
 +	@$(NORMAL_INSTALL)
-+	test -z "$(sysconfdir)" || $(MKDIR_P) "$(DESTDIR)$(sysconfdir)"
++	#test -z "$(sysconfdir)" || $(MKDIR_P) "$(DESTDIR)$(sysconfdir)"
 +	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
 +	for p in $$list; do \
 +	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
@@ -24072,402 +25269,9 @@ diff -Nur tslib-1.0.orig/etc/Makefile.in tslib-1.0/etc/Makefile.in
 +# Tell versions [3.59,3.63) of GNU make to not export all variables.
 +# Otherwise a system limit (for SysV at least) may be exceeded.
 +.NOEXPORT:
-diff -Nur tslib-1.0.orig/INSTALL tslib-1.0/INSTALL
---- tslib-1.0.orig/INSTALL	2006-08-24 23:02:55.000000000 +0200
-+++ tslib-1.0/INSTALL	2010-02-19 00:24:15.856856501 +0100
-@@ -1,16 +1,25 @@
- Installation Instructions
- *************************
- 
--Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
--Software Foundation, Inc.
-+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
- 
--This file is free documentation; the Free Software Foundation gives
--unlimited permission to copy, distribute and modify it.
-+   Copying and distribution of this file, with or without modification,
-+are permitted in any medium without royalty provided the copyright
-+notice and this notice are preserved.  This file is offered as-is,
-+without warranty of any kind.
- 
- Basic Installation
- ==================
- 
--These are generic installation instructions.
-+   Briefly, the shell commands `./configure; make; make install' should
-+configure, build, and install this package.  The following
-+more-detailed instructions are generic; see the `README' file for
-+instructions specific to this package.  Some packages provide this
-+`INSTALL' file but do not implement all of the features documented
-+below.  The lack of an optional feature in a given package is not
-+necessarily a bug.  More recommendations for GNU packages can be found
-+in *note Makefile Conventions: (standards)Makefile Conventions.
- 
-    The `configure' shell script attempts to guess correct values for
- various system-dependent variables used during compilation.  It uses
-@@ -23,9 +32,9 @@
- 
-    It can also use an optional file (typically called `config.cache'
- and enabled with `--cache-file=config.cache' or simply `-C') that saves
--the results of its tests to speed up reconfiguring.  (Caching is
-+the results of its tests to speed up reconfiguring.  Caching is
- disabled by default to prevent problems with accidental use of stale
--cache files.)
-+cache files.
- 
-    If you need to do unusual things to compile the package, please try
- to figure out how `configure' could check whether to do them, and mail
-@@ -35,30 +44,37 @@
- may remove or edit it.
- 
-    The file `configure.ac' (or `configure.in') is used to create
--`configure' by a program called `autoconf'.  You only need
--`configure.ac' if you want to change it or regenerate `configure' using
--a newer version of `autoconf'.
-+`configure' by a program called `autoconf'.  You need `configure.ac' if
-+you want to change it or regenerate `configure' using a newer version
-+of `autoconf'.
- 
--The simplest way to compile this package is:
-+   The simplest way to compile this package is:
- 
-   1. `cd' to the directory containing the package's source code and type
--     `./configure' to configure the package for your system.  If you're
--     using `csh' on an old version of System V, you might need to type
--     `sh ./configure' instead to prevent `csh' from trying to execute
--     `configure' itself.
-+     `./configure' to configure the package for your system.
- 
--     Running `configure' takes awhile.  While running, it prints some
--     messages telling which features it is checking for.
-+     Running `configure' might take a while.  While running, it prints
-+     some messages telling which features it is checking for.
- 
-   2. Type `make' to compile the package.
- 
-   3. Optionally, type `make check' to run any self-tests that come with
--     the package.
-+     the package, generally using the just-built uninstalled binaries.
- 
-   4. Type `make install' to install the programs and any data files and
--     documentation.
-+     documentation.  When installing into a prefix owned by root, it is
-+     recommended that the package be configured and built as a regular
-+     user, and only the `make install' phase executed with root
-+     privileges.
-+
-+  5. Optionally, type `make installcheck' to repeat any self-tests, but
-+     this time using the binaries in their final installed location.
-+     This target does not install anything.  Running this target as a
-+     regular user, particularly if the prior `make install' required
-+     root privileges, verifies that the installation completed
-+     correctly.
- 
--  5. You can remove the program binaries and object files from the
-+  6. You can remove the program binaries and object files from the
-      source code directory by typing `make clean'.  To also remove the
-      files that `configure' created (so you can compile the package for
-      a different kind of computer), type `make distclean'.  There is
-@@ -67,65 +83,120 @@
-      all sorts of other programs in order to regenerate files that came
-      with the distribution.
- 
-+  7. Often, you can also type `make uninstall' to remove the installed
-+     files again.  In practice, not all packages have tested that
-+     uninstallation works correctly, even though it is required by the
-+     GNU Coding Standards.
-+
-+  8. Some packages, particularly those that use Automake, provide `make
-+     distcheck', which can by used by developers to test that all other
-+     targets like `make install' and `make uninstall' work correctly.
-+     This target is generally not run by end users.
-+
- Compilers and Options
- =====================
- 
--Some systems require unusual options for compilation or linking that the
--`configure' script does not know about.  Run `./configure --help' for
--details on some of the pertinent environment variables.
-+   Some systems require unusual options for compilation or linking that
-+the `configure' script does not know about.  Run `./configure --help'
-+for details on some of the pertinent environment variables.
- 
-    You can give `configure' initial values for configuration parameters
- by setting variables in the command line or in the environment.  Here
- is an example:
- 
--     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
- 
-    *Note Defining Variables::, for more details.
- 
- Compiling For Multiple Architectures
- ====================================
- 
--You can compile the package for more than one kind of computer at the
-+   You can compile the package for more than one kind of computer at the
- same time, by placing the object files for each architecture in their
--own directory.  To do this, you must use a version of `make' that
--supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-+own directory.  To do this, you can use GNU `make'.  `cd' to the
- directory where you want the object files and executables to go and run
- the `configure' script.  `configure' automatically checks for the
--source code in the directory that `configure' is in and in `..'.
-+source code in the directory that `configure' is in and in `..'.  This
-+is known as a "VPATH" build.
- 
--   If you have to use a `make' that does not support the `VPATH'
--variable, you have to compile the package for one architecture at a
--time in the source code directory.  After you have installed the
--package for one architecture, use `make distclean' before reconfiguring
--for another architecture.
-+   With a non-GNU `make', it is safer to compile the package for one
-+architecture at a time in the source code directory.  After you have
-+installed the package for one architecture, use `make distclean' before
-+reconfiguring for another architecture.
-+
-+   On MacOS X 10.5 and later systems, you can create libraries and
-+executables that work on multiple system types--known as "fat" or
-+"universal" binaries--by specifying multiple `-arch' options to the
-+compiler but only a single `-arch' option to the preprocessor.  Like
-+this:
-+
-+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-+                 CPP="gcc -E" CXXCPP="g++ -E"
-+
-+   This is not guaranteed to produce working output in all cases, you
-+may have to build one architecture at a time and combine the results
-+using the `lipo' tool if you have problems.
- 
- Installation Names
- ==================
- 
--By default, `make install' will install the package's files in
--`/usr/local/bin', `/usr/local/man', etc.  You can specify an
--installation prefix other than `/usr/local' by giving `configure' the
--option `--prefix=PREFIX'.
-+   By default, `make install' installs the package's commands under
-+`/usr/local/bin', include files under `/usr/local/include', etc.  You
-+can specify an installation prefix other than `/usr/local' by giving
-+`configure' the option `--prefix=PREFIX', where PREFIX must be an
-+absolute file name.
- 
-    You can specify separate installation prefixes for
- architecture-specific files and architecture-independent files.  If you
--give `configure' the option `--exec-prefix=PREFIX', the package will
--use PREFIX as the prefix for installing programs and libraries.
--Documentation and other data files will still use the regular prefix.
-+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-+PREFIX as the prefix for installing programs and libraries.
-+Documentation and other data files still use the regular prefix.
- 
-    In addition, if you use an unusual directory layout you can give
- options like `--bindir=DIR' to specify different values for particular
- kinds of files.  Run `configure --help' for a list of the directories
--you can set and what kinds of files go in them.
-+you can set and what kinds of files go in them.  In general, the
-+default for these options is expressed in terms of `${prefix}', so that
-+specifying just `--prefix' will affect all of the other directory
-+specifications that were not explicitly provided.
-+
-+   The most portable way to affect installation locations is to pass the
-+correct locations to `configure'; however, many packages provide one or
-+both of the following shortcuts of passing variable assignments to the
-+`make install' command line to change installation locations without
-+having to reconfigure or recompile.
-+
-+   The first method involves providing an override variable for each
-+affected directory.  For example, `make install
-+prefix=/alternate/directory' will choose an alternate location for all
-+directory configuration variables that were expressed in terms of
-+`${prefix}'.  Any directories that were specified during `configure',
-+but not in terms of `${prefix}', must each be overridden at install
-+time for the entire installation to be relocated.  The approach of
-+makefile variable overrides for each directory variable is required by
-+the GNU Coding Standards, and ideally causes no recompilation.
-+However, some platforms have known limitations with the semantics of
-+shared libraries that end up requiring recompilation when using this
-+method, particularly noticeable in packages that use GNU Libtool.
-+
-+   The second method involves providing the `DESTDIR' variable.  For
-+example, `make install DESTDIR=/alternate/directory' will prepend
-+`/alternate/directory' before all installation names.  The approach of
-+`DESTDIR' overrides is not required by the GNU Coding Standards, and
-+does not work on platforms that have drive letters.  On the other hand,
-+it does better at avoiding recompilation issues, and works well even
-+when some directory options were not specified in terms of `${prefix}'
-+at `configure' time.
-+
-+Optional Features
-+=================
- 
-    If the package supports it, you can cause programs to be installed
- with an extra prefix or suffix on their names by giving `configure' the
- option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
- 
--Optional Features
--=================
--
--Some packages pay attention to `--enable-FEATURE' options to
-+   Some packages pay attention to `--enable-FEATURE' options to
- `configure', where FEATURE indicates an optional part of the package.
- They may also pay attention to `--with-PACKAGE' options, where PACKAGE
- is something like `gnu-as' or `x' (for the X Window System).  The
-@@ -137,14 +208,53 @@
- you can use the `configure' options `--x-includes=DIR' and
- `--x-libraries=DIR' to specify their locations.
- 
-+   Some packages offer the ability to configure how verbose the
-+execution of `make' will be.  For these packages, running `./configure
-+--enable-silent-rules' sets the default to minimal output, which can be
-+overridden with `make V=1'; while running `./configure
-+--disable-silent-rules' sets the default to verbose, which can be
-+overridden with `make V=0'.
-+
-+Particular systems
-+==================
-+
-+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-+CC is not installed, it is recommended to use the following options in
-+order to use an ANSI C compiler:
-+
-+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-+
-+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-+
-+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-+a workaround.  If GNU CC is not installed, it is therefore recommended
-+to try
-+
-+     ./configure CC="cc"
-+
-+and if that doesn't work, try
-+
-+     ./configure CC="cc -nodtk"
-+
-+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
-+directory contains several dysfunctional programs; working variants of
-+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-+in your `PATH', put it _after_ `/usr/bin'.
-+
-+   On Haiku, software installed for all users goes in `/boot/common',
-+not `/usr/local'.  It is recommended to use the following options:
-+
-+     ./configure --prefix=/boot/common
-+
- Specifying the System Type
- ==========================
- 
--There may be some features `configure' cannot figure out automatically,
--but needs to determine by the type of machine the package will run on.
--Usually, assuming the package is built to be run on the _same_
--architectures, `configure' can figure that out, but if it prints a
--message saying it cannot guess the machine type, give it the
-+   There may be some features `configure' cannot figure out
-+automatically, but needs to determine by the type of machine the package
-+will run on.  Usually, assuming the package is built to be run on the
-+_same_ architectures, `configure' can figure that out, but if it prints
-+a message saying it cannot guess the machine type, give it the
- `--build=TYPE' option.  TYPE can either be a short name for the system
- type, such as `sun4', or a canonical name which has the form:
- 
-@@ -152,14 +262,15 @@
- 
- where SYSTEM can have one of these forms:
- 
--     OS KERNEL-OS
-+     OS
-+     KERNEL-OS
- 
-    See the file `config.sub' for the possible values of each field.  If
- `config.sub' isn't included in this package, then this package doesn't
- need to know the machine type.
- 
-    If you are _building_ compiler tools for cross-compiling, you should
--use the `--target=TYPE' option to select the type of system they will
-+use the option `--target=TYPE' to select the type of system they will
- produce code for.
- 
-    If you want to _use_ a cross compiler, that generates code for a
-@@ -170,9 +281,9 @@
- Sharing Defaults
- ================
- 
--If you want to set default values for `configure' scripts to share, you
--can create a site shell script called `config.site' that gives default
--values for variables like `CC', `cache_file', and `prefix'.
-+   If you want to set default values for `configure' scripts to share,
-+you can create a site shell script called `config.site' that gives
-+default values for variables like `CC', `cache_file', and `prefix'.
- `configure' looks for `PREFIX/share/config.site' if it exists, then
- `PREFIX/etc/config.site' if it exists.  Or, you can set the
- `CONFIG_SITE' environment variable to the location of the site script.
-@@ -181,7 +292,7 @@
- Defining Variables
- ==================
- 
--Variables not defined in a site shell script can be set in the
-+   Variables not defined in a site shell script can be set in the
- environment passed to `configure'.  However, some packages may run
- configure again during the build, and the customized values of these
- variables may be lost.  In order to avoid this problem, you should set
-@@ -189,17 +300,30 @@
- 
-      ./configure CC=/usr/local2/bin/gcc
- 
--will cause the specified gcc to be used as the C compiler (unless it is
-+causes the specified `gcc' to be used as the C compiler (unless it is
- overridden in the site shell script).
- 
-+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-+an Autoconf bug.  Until the bug is fixed you can use this workaround:
-+
-+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-+
- `configure' Invocation
- ======================
- 
--`configure' recognizes the following options to control how it operates.
-+   `configure' recognizes the following options to control how it
-+operates.
- 
- `--help'
- `-h'
--     Print a summary of the options to `configure', and exit.
-+     Print a summary of all of the options to `configure', and exit.
-+
-+`--help=short'
-+`--help=recursive'
-+     Print a summary of the options unique to this package's
-+     `configure', and exit.  The `short' variant lists options used
-+     only in the top level, while the `recursive' variant lists options
-+     also present in any nested packages.
- 
- `--version'
- `-V'
-@@ -226,6 +350,16 @@
-      Look for the package's source code in directory DIR.  Usually
-      `configure' can determine that directory automatically.
- 
-+`--prefix=DIR'
-+     Use DIR as the installation prefix.  *note Installation Names::
-+     for more details, including other options available for fine-tuning
-+     the installation locations.
-+
-+`--no-create'
-+`-n'
-+     Run the configure checks, but stop before creating any output
-+     files.
-+
- `configure' also accepts some other, not widely useful, options.  Run
- `configure --help' for more details.
- 
 diff -Nur tslib-1.0.orig/install-sh tslib-1.0/install-sh
 --- tslib-1.0.orig/install-sh	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/install-sh	2010-02-19 00:24:15.180853641 +0100
++++ tslib-1.0/install-sh	2010-07-29 13:39:15.000000000 +0200
 @@ -0,0 +1,520 @@
 +#!/bin/sh
 +# install - install a program, script, or datafile
@@ -24991,7 +25795,7 @@ diff -Nur tslib-1.0.orig/install-sh tslib-1.0/install-sh
 +# End:
 diff -Nur tslib-1.0.orig/ltmain.sh tslib-1.0/ltmain.sh
 --- tslib-1.0.orig/ltmain.sh	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/ltmain.sh	2010-02-19 00:24:02.744855643 +0100
++++ tslib-1.0/ltmain.sh	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,8413 @@
 +# Generated from ltmain.m4sh.
 +
@@ -33408,7 +34212,7 @@ diff -Nur tslib-1.0.orig/ltmain.sh tslib-1.0/ltmain.sh
 +
 diff -Nur tslib-1.0.orig/m4/internal/libtool.m4 tslib-1.0/m4/internal/libtool.m4
 --- tslib-1.0.orig/m4/internal/libtool.m4	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/m4/internal/libtool.m4	2010-02-19 00:24:02.812857317 +0100
++++ tslib-1.0/m4/internal/libtool.m4	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,7377 @@
 +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 +#
@@ -40787,105 +41591,9 @@ diff -Nur tslib-1.0.orig/m4/internal/libtool.m4 tslib-1.0/m4/internal/libtool.m4
 +    ;;
 +  esac
 +])
-diff -Nur tslib-1.0.orig/m4/internal/lt~obsolete.m4 tslib-1.0/m4/internal/lt~obsolete.m4
---- tslib-1.0.orig/m4/internal/lt~obsolete.m4	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/m4/internal/lt~obsolete.m4	2010-02-19 00:24:03.080854595 +0100
-@@ -0,0 +1,92 @@
-+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
-+#
-+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
-+#   Written by Scott James Remnant, 2004.
-+#
-+# This file is free software; the Free Software Foundation gives
-+# unlimited permission to copy and/or distribute it, with or without
-+# modifications, as long as this notice is preserved.
-+
-+# serial 4 lt~obsolete.m4
-+
-+# These exist entirely to fool aclocal when bootstrapping libtool.
-+#
-+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-+# which have later been changed to m4_define as they aren't part of the
-+# exported API, or moved to Autoconf or Automake where they belong.
-+#
-+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
-+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-+# using a macro with the same name in our local m4/libtool.m4 it'll
-+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-+# and doesn't know about Autoconf macros at all.)
-+#
-+# So we provide this file, which has a silly filename so it's always
-+# included after everything else.  This provides aclocal with the
-+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-+# because those macros already exist, or will be overwritten later.
-+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
-+#
-+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-+# Yes, that means every name once taken will need to remain here until
-+# we give up compatibility with versions before 1.7, at which point
-+# we need to keep only those names which we still refer to.
-+
-+# This is to help aclocal find these macros, as it can't see m4_define.
-+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
-+
-+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
-+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
-+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
-+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
-+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
-+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
-+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
-+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
-+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
-+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
-+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
-+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
-+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
-+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
-+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
-+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
-+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
-+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
-+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
-+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
-+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
-+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
-+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
-+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
-+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
-+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
-+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
-+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
-+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
-+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
-+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
-+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
-+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
-+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
-+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
-+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
-+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
-+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
-+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
-+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
-+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
-+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
-+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
-+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
-+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
-+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
-+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
-+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
-+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
-+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
-+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
-+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
-+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
-+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
-+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
 diff -Nur tslib-1.0.orig/m4/internal/ltoptions.m4 tslib-1.0/m4/internal/ltoptions.m4
 --- tslib-1.0.orig/m4/internal/ltoptions.m4	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/m4/internal/ltoptions.m4	2010-02-19 00:24:02.872855189 +0100
++++ tslib-1.0/m4/internal/ltoptions.m4	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,368 @@
 +# Helper functions for option handling.                    -*- Autoconf -*-
 +#
@@ -41257,7 +41965,7 @@ diff -Nur tslib-1.0.orig/m4/internal/ltoptions.m4 tslib-1.0/m4/internal/ltoption
 +		 [m4_define([_LTDL_TYPE], [convenience])])
 diff -Nur tslib-1.0.orig/m4/internal/ltsugar.m4 tslib-1.0/m4/internal/ltsugar.m4
 --- tslib-1.0.orig/m4/internal/ltsugar.m4	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/m4/internal/ltsugar.m4	2010-02-19 00:24:02.940856593 +0100
++++ tslib-1.0/m4/internal/ltsugar.m4	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,123 @@
 +# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 +#
@@ -41384,7 +42092,7 @@ diff -Nur tslib-1.0.orig/m4/internal/ltsugar.m4 tslib-1.0/m4/internal/ltsugar.m4
 +])
 diff -Nur tslib-1.0.orig/m4/internal/ltversion.m4 tslib-1.0/m4/internal/ltversion.m4
 --- tslib-1.0.orig/m4/internal/ltversion.m4	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/m4/internal/ltversion.m4	2010-02-19 00:24:03.008854921 +0100
++++ tslib-1.0/m4/internal/ltversion.m4	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,23 @@
 +# ltversion.m4 -- version numbers			-*- Autoconf -*-
 +#
@@ -41409,813 +42117,105 @@ diff -Nur tslib-1.0.orig/m4/internal/ltversion.m4 tslib-1.0/m4/internal/ltversio
 +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 +_LT_DECL(, macro_revision, 0)
 +])
-diff -Nur tslib-1.0.orig/Makefile.in tslib-1.0/Makefile.in
---- tslib-1.0.orig/Makefile.in	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/Makefile.in	2010-02-19 00:24:15.948852025 +0100
-@@ -0,0 +1,800 @@
-+# Makefile.in generated by automake 1.11.1 from Makefile.am.
-+# @configure_input@
-+
-+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-+# Inc.
-+# This Makefile.in is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
+diff -Nur tslib-1.0.orig/m4/internal/lt~obsolete.m4 tslib-1.0/m4/internal/lt~obsolete.m4
+--- tslib-1.0.orig/m4/internal/lt~obsolete.m4	1970-01-01 01:00:00.000000000 +0100
++++ tslib-1.0/m4/internal/lt~obsolete.m4	2010-07-29 13:39:16.000000000 +0200
+@@ -0,0 +1,92 @@
++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
++#
++#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
++#   Written by Scott James Remnant, 2004.
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
 +
-+@SET_MAKE@
++# serial 4 lt~obsolete.m4
 +
++# These exist entirely to fool aclocal when bootstrapping libtool.
 +#
-+#  tslib/Makefile.am
-+#
-+#  Copyright (C) 2001 Russell King.
++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
++# which have later been changed to m4_define as they aren't part of the
++# exported API, or moved to Autoconf or Automake where they belong.
 +#
-+# This file is placed under the LGPL.  Please see the file
-+# COPYING for more details.
++# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
++# using a macro with the same name in our local m4/libtool.m4 it'll
++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
++# and doesn't know about Autoconf macros at all.)
 +#
-+# $Id: Makefile.am,v 1.3 2005/02/28 18:56:09 kergoth Exp $
++# So we provide this file, which has a silly filename so it's always
++# included after everything else.  This provides aclocal with the
++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
++# because those macros already exist, or will be overwritten later.
++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
 +#
++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
++# Yes, that means every name once taken will need to remain here until
++# we give up compatibility with versions before 1.7, at which point
++# we need to keep only those names which we still refer to.
 +
-+VPATH = @srcdir@
-+pkgdatadir = $(datadir)/@PACKAGE@
-+pkgincludedir = $(includedir)/@PACKAGE@
-+pkglibdir = $(libdir)/@PACKAGE@
-+pkglibexecdir = $(libexecdir)/@PACKAGE@
-+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-+install_sh_DATA = $(install_sh) -c -m 644
-+install_sh_PROGRAM = $(install_sh) -c
-+install_sh_SCRIPT = $(install_sh) -c
-+INSTALL_HEADER = $(INSTALL_DATA)
-+transform = $(program_transform_name)
-+NORMAL_INSTALL = :
-+PRE_INSTALL = :
-+POST_INSTALL = :
-+NORMAL_UNINSTALL = :
-+PRE_UNINSTALL = :
-+POST_UNINSTALL = :
-+build_triplet = @build@
-+host_triplet = @host@
-+subdir = .
-+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-+	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-+	$(srcdir)/tslib.pc.in $(top_srcdir)/configure AUTHORS COPYING \
-+	ChangeLog INSTALL NEWS config.guess config.sub depcomp \
-+	install-sh ltmain.sh missing
-+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-+am__aclocal_m4_deps = $(top_srcdir)/m4/internal/libtool.m4 \
-+	$(top_srcdir)/m4/internal/ltoptions.m4 \
-+	$(top_srcdir)/m4/internal/ltsugar.m4 \
-+	$(top_srcdir)/m4/internal/ltversion.m4 \
-+	$(top_srcdir)/m4/internal/lt~obsolete.m4 \
-+	$(top_srcdir)/m4/internal/visibility.m4 \
-+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
-+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-+	$(ACLOCAL_M4)
-+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
-+ configure.lineno config.status.lineno
-+mkinstalldirs = $(install_sh) -d
-+CONFIG_HEADER = config.h
-+CONFIG_CLEAN_FILES =
-+CONFIG_CLEAN_VPATH_FILES =
-+SOURCES =
-+DIST_SOURCES =
-+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-+	html-recursive info-recursive install-data-recursive \
-+	install-dvi-recursive install-exec-recursive \
-+	install-html-recursive install-info-recursive \
-+	install-pdf-recursive install-ps-recursive install-recursive \
-+	installcheck-recursive installdirs-recursive pdf-recursive \
-+	ps-recursive uninstall-recursive
-+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-+am__vpath_adj = case $$p in \
-+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-+    *) f=$$p;; \
-+  esac;
-+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-+am__install_max = 40
-+am__nobase_strip_setup = \
-+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-+am__nobase_strip = \
-+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-+am__nobase_list = $(am__nobase_strip_setup); \
-+  for p in $$list; do echo "$$p $$p"; done | \
-+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-+    if (++n[$$2] == $(am__install_max)) \
-+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-+    END { for (dir in files) print dir, files[dir] }'
-+am__base_list = \
-+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-+am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
-+DATA = $(pkgconfig_DATA)
-+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-+  distclean-recursive maintainer-clean-recursive
-+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-+	distdir dist dist-all distcheck
-+ETAGS = etags
-+CTAGS = ctags
-+DIST_SUBDIRS = $(SUBDIRS)
-+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-+distdir = $(PACKAGE)-$(VERSION)
-+top_distdir = $(distdir)
-+am__remove_distdir = \
-+  { test ! -d "$(distdir)" \
-+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-+         && rm -fr "$(distdir)"; }; }
-+am__relativize = \
-+  dir0=`pwd`; \
-+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-+  sed_rest='s,^[^/]*/*,,'; \
-+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-+  sed_butlast='s,/*[^/]*$$,,'; \
-+  while test -n "$$dir1"; do \
-+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-+    if test "$$first" != "."; then \
-+      if test "$$first" = ".."; then \
-+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-+      else \
-+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-+        if test "$$first2" = "$$first"; then \
-+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-+        else \
-+          dir2="../$$dir2"; \
-+        fi; \
-+        dir0="$$dir0"/"$$first"; \
-+      fi; \
-+    fi; \
-+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-+  done; \
-+  reldir="$$dir2"
-+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
-+GZIP_ENV = --best
-+distuninstallcheck_listfiles = find . -type f -print
-+distcleancheck_listfiles = find . -type f -print
-+ACLOCAL = @ACLOCAL@
-+ALLOCA = @ALLOCA@
-+AMTAR = @AMTAR@
-+AR = @AR@
-+AUTOCONF = @AUTOCONF@
-+AUTOHEADER = @AUTOHEADER@
-+AUTOMAKE = @AUTOMAKE@
-+AWK = @AWK@
-+CC = @CC@
-+CCDEPMODE = @CCDEPMODE@
-+CFLAGS = @CFLAGS@
-+CPP = @CPP@
-+CPPFLAGS = @CPPFLAGS@
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
-+CXXDEPMODE = @CXXDEPMODE@
-+CXXFLAGS = @CXXFLAGS@
-+CYGPATH_W = @CYGPATH_W@
-+DEBUGFLAGS = @DEBUGFLAGS@
-+DEFS = @DEFS@
-+DEPDIR = @DEPDIR@
-+DSYMUTIL = @DSYMUTIL@
-+DUMPBIN = @DUMPBIN@
-+ECHO_C = @ECHO_C@
-+ECHO_N = @ECHO_N@
-+ECHO_T = @ECHO_T@
-+EGREP = @EGREP@
-+EXEEXT = @EXEEXT@
-+FGREP = @FGREP@
-+GREP = @GREP@
-+INSTALL = @INSTALL@
-+INSTALL_DATA = @INSTALL_DATA@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-+LD = @LD@
-+LDFLAGS = @LDFLAGS@
-+LIBFLAGS = @LIBFLAGS@
-+LIBOBJS = @LIBOBJS@
-+LIBS = @LIBS@
-+LIBTOOL = @LIBTOOL@
-+LIPO = @LIPO@
-+LN_S = @LN_S@
-+LTLIBOBJS = @LTLIBOBJS@
-+LT_AGE = @LT_AGE@
-+LT_CURRENT = @LT_CURRENT@
-+LT_RELEASE = @LT_RELEASE@
-+LT_REVISION = @LT_REVISION@
-+MAKEINFO = @MAKEINFO@
-+MKDIR_P = @MKDIR_P@
-+NM = @NM@
-+NMEDIT = @NMEDIT@
-+OBJDUMP = @OBJDUMP@
-+OBJEXT = @OBJEXT@
-+OTOOL = @OTOOL@
-+OTOOL64 = @OTOOL64@
-+PACKAGE = @PACKAGE@
-+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-+PACKAGE_DESCRIPTION = @PACKAGE_DESCRIPTION@
-+PACKAGE_NAME = @PACKAGE_NAME@
-+PACKAGE_STRING = @PACKAGE_STRING@
-+PACKAGE_TARNAME = @PACKAGE_TARNAME@
-+PACKAGE_URL = @PACKAGE_URL@
-+PACKAGE_VERSION = @PACKAGE_VERSION@
-+PATH_SEPARATOR = @PATH_SEPARATOR@
-+PLUGIN_DIR = @PLUGIN_DIR@
-+RANLIB = @RANLIB@
-+SED = @SED@
-+SET_MAKE = @SET_MAKE@
-+SHELL = @SHELL@
-+STRIP = @STRIP@
-+TS_CONF = @TS_CONF@
-+VERSION = @VERSION@
-+VIS_CFLAGS = @VIS_CFLAGS@
-+abs_builddir = @abs_builddir@
-+abs_srcdir = @abs_srcdir@
-+abs_top_builddir = @abs_top_builddir@
-+abs_top_srcdir = @abs_top_srcdir@
-+ac_ct_CC = @ac_ct_CC@
-+ac_ct_CXX = @ac_ct_CXX@
-+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-+am__include = @am__include@
-+am__leading_dot = @am__leading_dot@
-+am__quote = @am__quote@
-+am__tar = @am__tar@
-+am__untar = @am__untar@
-+bindir = @bindir@
-+build = @build@
-+build_alias = @build_alias@
-+build_cpu = @build_cpu@
-+build_os = @build_os@
-+build_vendor = @build_vendor@
-+builddir = @builddir@
-+datadir = @datadir@
-+datarootdir = @datarootdir@
-+docdir = @docdir@
-+dvidir = @dvidir@
-+exec_prefix = @exec_prefix@
-+host = @host@
-+host_alias = @host_alias@
-+host_cpu = @host_cpu@
-+host_os = @host_os@
-+host_vendor = @host_vendor@
-+htmldir = @htmldir@
-+includedir = @includedir@
-+infodir = @infodir@
-+install_sh = @install_sh@
-+libdir = @libdir@
-+libexecdir = @libexecdir@
-+localedir = @localedir@
-+localstatedir = @localstatedir@
-+lt_ECHO = @lt_ECHO@
-+mandir = @mandir@
-+mkdir_p = @mkdir_p@
-+oldincludedir = @oldincludedir@
-+pdfdir = @pdfdir@
-+prefix = @prefix@
-+program_transform_name = @program_transform_name@
-+psdir = @psdir@
-+sbindir = @sbindir@
-+sharedstatedir = @sharedstatedir@
-+srcdir = @srcdir@
-+sysconfdir = @sysconfdir@
-+target_alias = @target_alias@
-+top_build_prefix = @top_build_prefix@
-+top_builddir = @top_builddir@
-+top_srcdir = @top_srcdir@
-+SUBDIRS = etc src plugins tests
-+EXTRA_DIST = autogen.sh
-+ACLOCAL_AMFLAGS = -I m4/internal -I m4/external
-+AUTOMAKE_OPTIONS = 1.6
-+pkgconfigdir = $(libdir)/pkgconfig
-+pkgconfig_DATA = $(PACKAGE)-$(LT_RELEASE).pc
-+all: config.h
-+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-+
-+.SUFFIXES:
-+am--refresh:
-+	@:
-+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-+	@for dep in $?; do \
-+	  case '$(am__configure_deps)' in \
-+	    *$$dep*) \
-+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
-+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
-+		&& exit 0; \
-+	      exit 1;; \
-+	  esac; \
-+	done; \
-+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
-+	$(am__cd) $(top_srcdir) && \
-+	  $(AUTOMAKE) --gnu Makefile
-+.PRECIOUS: Makefile
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+	@case '$?' in \
-+	  *config.status*) \
-+	    echo ' $(SHELL) ./config.status'; \
-+	    $(SHELL) ./config.status;; \
-+	  *) \
-+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-+	esac;
-+
-+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-+	$(SHELL) ./config.status --recheck
-+
-+$(top_srcdir)/configure:  $(am__configure_deps)
-+	$(am__cd) $(srcdir) && $(AUTOCONF)
-+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-+$(am__aclocal_m4_deps):
-+
-+config.h: stamp-h1
-+	@if test ! -f $@; then \
-+	  rm -f stamp-h1; \
-+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-+	else :; fi
-+
-+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-+	@rm -f stamp-h1
-+	cd $(top_builddir) && $(SHELL) ./config.status config.h
-+$(srcdir)/config.h.in:  $(am__configure_deps) 
-+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-+	rm -f stamp-h1
-+	touch $@
-+
-+distclean-hdr:
-+	-rm -f config.h stamp-h1
-+
-+mostlyclean-libtool:
-+	-rm -f *.lo
-+
-+clean-libtool:
-+	-rm -rf .libs _libs
-+
-+distclean-libtool:
-+	-rm -f libtool config.lt
-+install-pkgconfigDATA: $(pkgconfig_DATA)
-+	@$(NORMAL_INSTALL)
-+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-+	for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  echo "$$d$$p"; \
-+	done | $(am__base_list) | \
-+	while read files; do \
-+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
-+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
-+	done
-+
-+uninstall-pkgconfigDATA:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-+	test -n "$$files" || exit 0; \
-+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
-+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
-+
-+# This directory's subdirectories are mostly independent; you can cd
-+# into them and run `make' without going through this Makefile.
-+# To change the values of `make' variables: instead of editing Makefiles,
-+# (1) if the variable is set in `config.status', edit `config.status'
-+#     (which will cause the Makefiles to be regenerated when you run `make');
-+# (2) otherwise, pass the desired values on the `make' command line.
-+$(RECURSIVE_TARGETS):
-+	@fail= failcom='exit 1'; \
-+	for f in x $$MAKEFLAGS; do \
-+	  case $$f in \
-+	    *=* | --[!k]*);; \
-+	    *k*) failcom='fail=yes';; \
-+	  esac; \
-+	done; \
-+	dot_seen=no; \
-+	target=`echo $@ | sed s/-recursive//`; \
-+	list='$(SUBDIRS)'; for subdir in $$list; do \
-+	  echo "Making $$target in $$subdir"; \
-+	  if test "$$subdir" = "."; then \
-+	    dot_seen=yes; \
-+	    local_target="$$target-am"; \
-+	  else \
-+	    local_target="$$target"; \
-+	  fi; \
-+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-+	  || eval $$failcom; \
-+	done; \
-+	if test "$$dot_seen" = "no"; then \
-+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-+	fi; test -z "$$fail"
-+
-+$(RECURSIVE_CLEAN_TARGETS):
-+	@fail= failcom='exit 1'; \
-+	for f in x $$MAKEFLAGS; do \
-+	  case $$f in \
-+	    *=* | --[!k]*);; \
-+	    *k*) failcom='fail=yes';; \
-+	  esac; \
-+	done; \
-+	dot_seen=no; \
-+	case "$@" in \
-+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-+	  *) list='$(SUBDIRS)' ;; \
-+	esac; \
-+	rev=''; for subdir in $$list; do \
-+	  if test "$$subdir" = "."; then :; else \
-+	    rev="$$subdir $$rev"; \
-+	  fi; \
-+	done; \
-+	rev="$$rev ."; \
-+	target=`echo $@ | sed s/-recursive//`; \
-+	for subdir in $$rev; do \
-+	  echo "Making $$target in $$subdir"; \
-+	  if test "$$subdir" = "."; then \
-+	    local_target="$$target-am"; \
-+	  else \
-+	    local_target="$$target"; \
-+	  fi; \
-+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-+	  || eval $$failcom; \
-+	done && test -z "$$fail"
-+tags-recursive:
-+	list='$(SUBDIRS)'; for subdir in $$list; do \
-+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-+	done
-+ctags-recursive:
-+	list='$(SUBDIRS)'; for subdir in $$list; do \
-+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-+	done
-+
-+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-+	unique=`for i in $$list; do \
-+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+	  done | \
-+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-+	mkid -fID $$unique
-+tags: TAGS
-+
-+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-+		$(TAGS_FILES) $(LISP)
-+	set x; \
-+	here=`pwd`; \
-+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-+	  include_option=--etags-include; \
-+	  empty_fix=.; \
-+	else \
-+	  include_option=--include; \
-+	  empty_fix=; \
-+	fi; \
-+	list='$(SUBDIRS)'; for subdir in $$list; do \
-+	  if test "$$subdir" = .; then :; else \
-+	    test ! -f $$subdir/TAGS || \
-+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-+	  fi; \
-+	done; \
-+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-+	unique=`for i in $$list; do \
-+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+	  done | \
-+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-+	shift; \
-+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-+	  test -n "$$unique" || unique=$$empty_fix; \
-+	  if test $$# -gt 0; then \
-+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-+	      "$$@" $$unique; \
-+	  else \
-+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-+	      $$unique; \
-+	  fi; \
-+	fi
-+ctags: CTAGS
-+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-+		$(TAGS_FILES) $(LISP)
-+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-+	unique=`for i in $$list; do \
-+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+	  done | \
-+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-+	test -z "$(CTAGS_ARGS)$$unique" \
-+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-+	     $$unique
-+
-+GTAGS:
-+	here=`$(am__cd) $(top_builddir) && pwd` \
-+	  && $(am__cd) $(top_srcdir) \
-+	  && gtags -i $(GTAGS_ARGS) "$$here"
-+
-+distclean-tags:
-+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-+
-+distdir: $(DISTFILES)
-+	$(am__remove_distdir)
-+	test -d "$(distdir)" || mkdir "$(distdir)"
-+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-+	list='$(DISTFILES)'; \
-+	  dist_files=`for file in $$list; do echo $$file; done | \
-+	  sed -e "s|^$$srcdirstrip/||;t" \
-+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-+	case $$dist_files in \
-+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-+			   sort -u` ;; \
-+	esac; \
-+	for file in $$dist_files; do \
-+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-+	  if test -d $$d/$$file; then \
-+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-+	    if test -d "$(distdir)/$$file"; then \
-+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-+	    fi; \
-+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-+	    fi; \
-+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-+	  else \
-+	    test -f "$(distdir)/$$file" \
-+	    || cp -p $$d/$$file "$(distdir)/$$file" \
-+	    || exit 1; \
-+	  fi; \
-+	done
-+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-+	  if test "$$subdir" = .; then :; else \
-+	    test -d "$(distdir)/$$subdir" \
-+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-+	    || exit 1; \
-+	  fi; \
-+	done
-+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-+	  if test "$$subdir" = .; then :; else \
-+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-+	    $(am__relativize); \
-+	    new_distdir=$$reldir; \
-+	    dir1=$$subdir; dir2="$(top_distdir)"; \
-+	    $(am__relativize); \
-+	    new_top_distdir=$$reldir; \
-+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-+	    ($(am__cd) $$subdir && \
-+	      $(MAKE) $(AM_MAKEFLAGS) \
-+	        top_distdir="$$new_top_distdir" \
-+	        distdir="$$new_distdir" \
-+		am__remove_distdir=: \
-+		am__skip_length_check=: \
-+		am__skip_mode_fix=: \
-+	        distdir) \
-+	      || exit 1; \
-+	  fi; \
-+	done
-+	-test -n "$(am__skip_mode_fix)" \
-+	|| find "$(distdir)" -type d ! -perm -755 \
-+		-exec chmod u+rwx,go+rx {} \; -o \
-+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-+	|| chmod -R a+r "$(distdir)"
-+dist-gzip: distdir
-+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-+	$(am__remove_distdir)
-+dist-bzip2: distdir
-+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-+	$(am__remove_distdir)
-+
-+dist-lzma: distdir
-+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-+	$(am__remove_distdir)
-+
-+dist-xz: distdir
-+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-+	$(am__remove_distdir)
-+
-+dist-tarZ: distdir
-+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-+	$(am__remove_distdir)
-+
-+dist-shar: distdir
-+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-+	$(am__remove_distdir)
-+
-+dist-zip: distdir
-+	-rm -f $(distdir).zip
-+	zip -rq $(distdir).zip $(distdir)
-+	$(am__remove_distdir)
-+
-+dist dist-all: distdir
-+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-+	$(am__remove_distdir)
-+
-+# This target untars the dist file and tries a VPATH configuration.  Then
-+# it guarantees that the distribution is self-contained by making another
-+# tarfile.
-+distcheck: dist
-+	case '$(DIST_ARCHIVES)' in \
-+	*.tar.gz*) \
-+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-+	*.tar.bz2*) \
-+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-+	*.tar.lzma*) \
-+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-+	*.tar.xz*) \
-+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-+	*.tar.Z*) \
-+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-+	*.shar.gz*) \
-+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-+	*.zip*) \
-+	  unzip $(distdir).zip ;;\
-+	esac
-+	chmod -R a-w $(distdir); chmod a+w $(distdir)
-+	mkdir $(distdir)/_build
-+	mkdir $(distdir)/_inst
-+	chmod a-w $(distdir)
-+	test -d $(distdir)/_build || exit 0; \
-+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-+	  && am__cwd=`pwd` \
-+	  && $(am__cd) $(distdir)/_build \
-+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-+	    $(DISTCHECK_CONFIGURE_FLAGS) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-+	  && $(MAKE) $(AM_MAKEFLAGS) check \
-+	  && $(MAKE) $(AM_MAKEFLAGS) install \
-+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-+	        distuninstallcheck \
-+	  && chmod -R a-w "$$dc_install_base" \
-+	  && ({ \
-+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-+	  && rm -rf "$$dc_destdir" \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-+	  && rm -rf $(DIST_ARCHIVES) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-+	  && cd "$$am__cwd" \
-+	  || exit 1
-+	$(am__remove_distdir)
-+	@(echo "$(distdir) archives ready for distribution: "; \
-+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-+distuninstallcheck:
-+	@$(am__cd) '$(distuninstallcheck_dir)' \
-+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-+	   || { echo "ERROR: files left after uninstall:" ; \
-+	        if test -n "$(DESTDIR)"; then \
-+	          echo "  (check DESTDIR support)"; \
-+	        fi ; \
-+	        $(distuninstallcheck_listfiles) ; \
-+	        exit 1; } >&2
-+distcleancheck: distclean
-+	@if test '$(srcdir)' = . ; then \
-+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-+	  exit 1 ; \
-+	fi
-+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-+	  || { echo "ERROR: files left in build directory after distclean:" ; \
-+	       $(distcleancheck_listfiles) ; \
-+	       exit 1; } >&2
-+check-am: all-am
-+check: check-recursive
-+all-am: Makefile $(DATA) config.h
-+installdirs: installdirs-recursive
-+installdirs-am:
-+	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
-+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-+	done
-+install: install-recursive
-+install-exec: install-exec-recursive
-+install-data: install-data-recursive
-+uninstall: uninstall-recursive
-+
-+install-am: all-am
-+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-+
-+installcheck: installcheck-recursive
-+install-strip:
-+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-+	  `test -z '$(STRIP)' || \
-+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-+mostlyclean-generic:
-+
-+clean-generic:
-+
-+distclean-generic:
-+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-+
-+maintainer-clean-generic:
-+	@echo "This command is intended for maintainers to use"
-+	@echo "it deletes files that may require special tools to rebuild."
-+clean: clean-recursive
-+
-+clean-am: clean-generic clean-libtool mostlyclean-am
-+
-+distclean: distclean-recursive
-+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-+	-rm -f Makefile
-+distclean-am: clean-am distclean-generic distclean-hdr \
-+	distclean-libtool distclean-tags
-+
-+dvi: dvi-recursive
-+
-+dvi-am:
-+
-+html: html-recursive
-+
-+html-am:
-+
-+info: info-recursive
-+
-+info-am:
-+
-+install-data-am: install-pkgconfigDATA
-+
-+install-dvi: install-dvi-recursive
-+
-+install-dvi-am:
-+
-+install-exec-am:
-+
-+install-html: install-html-recursive
-+
-+install-html-am:
-+
-+install-info: install-info-recursive
-+
-+install-info-am:
-+
-+install-man:
-+
-+install-pdf: install-pdf-recursive
-+
-+install-pdf-am:
-+
-+install-ps: install-ps-recursive
-+
-+install-ps-am:
-+
-+installcheck-am:
-+
-+maintainer-clean: maintainer-clean-recursive
-+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-+	-rm -rf $(top_srcdir)/autom4te.cache
-+	-rm -f Makefile
-+maintainer-clean-am: distclean-am maintainer-clean-generic
-+
-+mostlyclean: mostlyclean-recursive
-+
-+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-+
-+pdf: pdf-recursive
-+
-+pdf-am:
-+
-+ps: ps-recursive
-+
-+ps-am:
-+
-+uninstall-am: uninstall-pkgconfigDATA
-+
-+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-+	ctags-recursive install-am install-strip tags-recursive
-+
-+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-+	all all-am am--refresh check check-am clean clean-generic \
-+	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-+	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
-+	distcheck distclean distclean-generic distclean-hdr \
-+	distclean-libtool distclean-tags distcleancheck distdir \
-+	distuninstallcheck dvi dvi-am html html-am info info-am \
-+	install install-am install-data install-data-am install-dvi \
-+	install-dvi-am install-exec install-exec-am install-html \
-+	install-html-am install-info install-info-am install-man \
-+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
-+	install-ps-am install-strip installcheck installcheck-am \
-+	installdirs installdirs-am maintainer-clean \
-+	maintainer-clean-generic mostlyclean mostlyclean-generic \
-+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-+	uninstall uninstall-am uninstall-pkgconfigDATA
-+
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
 +
-+# Tell versions [3.59,3.63) of GNU make to not export all variables.
-+# Otherwise a system limit (for SysV at least) may be exceeded.
-+.NOEXPORT:
++m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
++m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
++m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
++m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
++m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
++m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
++m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
++m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
++m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
++m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
++m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
++m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
++m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
++m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
++m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
++m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
++m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
++m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
++m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
++m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
++m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
++m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
++m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
++m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
++m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
++m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
++m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
++m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
++m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
++m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
++m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
++m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
++m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
++m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
 diff -Nur tslib-1.0.orig/missing tslib-1.0/missing
 --- tslib-1.0.orig/missing	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/missing	2010-02-19 00:24:15.184855268 +0100
++++ tslib-1.0/missing	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,376 @@
 +#! /bin/sh
 +# Common stub for a few missing GNU programs while installing.
@@ -42595,7 +42595,7 @@ diff -Nur tslib-1.0.orig/missing tslib-1.0/missing
 +# End:
 diff -Nur tslib-1.0.orig/plugins/Makefile.in tslib-1.0/plugins/Makefile.in
 --- tslib-1.0.orig/plugins/Makefile.in	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/plugins/Makefile.in	2010-02-19 00:24:15.516853426 +0100
++++ tslib-1.0/plugins/Makefile.in	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,746 @@
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
 +# @configure_input@
@@ -43345,7 +43345,7 @@ diff -Nur tslib-1.0.orig/plugins/Makefile.in tslib-1.0/plugins/Makefile.in
 +.NOEXPORT:
 diff -Nur tslib-1.0.orig/src/Makefile.in tslib-1.0/src/Makefile.in
 --- tslib-1.0.orig/src/Makefile.in	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/src/Makefile.in	2010-02-19 00:24:15.660852771 +0100
++++ tslib-1.0/src/Makefile.in	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,594 @@
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
 +# @configure_input@
@@ -43943,7 +43943,7 @@ diff -Nur tslib-1.0.orig/src/Makefile.in tslib-1.0/src/Makefile.in
 +.NOEXPORT:
 diff -Nur tslib-1.0.orig/tests/Makefile.in tslib-1.0/tests/Makefile.in
 --- tslib-1.0.orig/tests/Makefile.in	1970-01-01 01:00:00.000000000 +0100
-+++ tslib-1.0/tests/Makefile.in	2010-02-19 00:24:15.824854936 +0100
++++ tslib-1.0/tests/Makefile.in	2010-07-29 13:39:16.000000000 +0200
 @@ -0,0 +1,584 @@
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
 +# @configure_input@
diff --git a/scripts/tsort b/scripts/tsort
index d4b176f6f..77ffa1237 100755
--- a/scripts/tsort
+++ b/scripts/tsort
@@ -7,6 +7,9 @@ case $os in
 	NetBSD|MirBSD|OpenBSD)
 		/usr/bin/tsort -r
 		;;
+	FreeBSD)
+		/usr/bin/tsort | tail -r
+		;;
 	*)
 		/usr/bin/tsort | tac
 		;;