cleanup, add general patches for 4.1.3

4 files changed, 0 insertions, 300853 deletions

diff --git a/target/arm/bcm28xx/patches/4.1.2/0001-raspberry-pi.patch b/target/arm/bcm28xx/patches/4.1.2/0001-raspberry-pi.patch
deleted file mode 100644
index 7abeae26f..000000000
--- a/target/arm/bcm28xx/patches/4.1.2/0001-raspberry-pi.patch
+++ /dev/null
@@ -1,300853 +0,0 @@
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2708_common.dtsi linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708_common.dtsi
---- linux-4.1.1/arch/arm/boot/dts/bcm2708_common.dtsi	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708_common.dtsi	2015-07-07 23:32:47.417460272 -0500
-@@ -0,0 +1,273 @@
-+/include/ "skeleton.dtsi"
-+
-+/ {
-+	interrupt-parent = <&intc>;
-+
-+	aliases {
-+		audio = &audio;
-+		sound = &sound;
-+		soc = &soc;
-+		dma = &dma;
-+		intc = &intc;
-+		watchdog = &watchdog;
-+		random = &random;
-+		mailbox = &mailbox;
-+		gpio = &gpio;
-+		uart0 = &uart0;
-+		i2s  = &i2s;
-+		spi0 = &spi0;
-+		i2c0 = &i2c0;
-+		uart1 = &uart1;
-+		mmc = &mmc;
-+		i2c1 = &i2c1;
-+		i2c2 = &i2c2;
-+		usb = &usb;
-+		leds = &leds;
-+		fb = &fb;
-+		vchiq = &vchiq;
-+		thermal = &thermal;
-+		clocks = &clocks;
-+	};
-+
-+	/* Onboard audio */
-+	audio: audio {
-+		compatible = "brcm,bcm2835-audio";
-+		brcm,pwm-channels = <8>;
-+		status = "disabled";
-+	};
-+
-+	/* External sound card */
-+	sound: sound {
-+	};
-+
-+	soc: soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		dma: dma@7e007000 {
-+			compatible = "brcm,bcm2835-dma";
-+			reg = <0x7e007000 0xf00>;
-+			interrupts = <1 16>,
-+				     <1 17>,
-+				     <1 18>,
-+				     <1 19>,
-+				     <1 20>,
-+				     <1 21>,
-+				     <1 22>,
-+				     <1 23>,
-+				     <1 24>,
-+				     <1 25>,
-+				     <1 26>,
-+				     <1 27>,
-+				     <1 28>;
-+
-+			#dma-cells = <1>;
-+			brcm,dma-channel-mask = <0x7f35>;
-+		};
-+
-+		intc: interrupt-controller {
-+			compatible = "brcm,bcm2708-armctrl-ic";
-+			reg = <0x7e00b200 0x200>;
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		mailbox: mailbox@7e00b800 {
-+			compatible = "brcm,bcm2708-vcio";
-+			reg = <0x7e00b880 0x40>;
-+			interrupts = <0 1>;
-+		};
-+
-+		watchdog: watchdog@7e100000 {
-+			compatible = "brcm,bcm2835-pm-wdt";
-+			reg = <0x7e100000 0x28>;
-+			status = "disabled";
-+		};
-+
-+		random: rng@7e104000 {
-+			compatible = "brcm,bcm2835-rng";
-+			reg = <0x7e104000 0x10>;
-+			status = "disabled";
-+		};
-+
-+		gpio: gpio {
-+			compatible = "brcm,bcm2835-gpio";
-+			reg = <0x7e200000 0xb4>;
-+			interrupts = <2 17>, <2 18>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		uart0: uart@7e201000 {
-+			compatible = "arm,pl011", "arm,primecell";
-+			reg = <0x7e201000 0x1000>;
-+			interrupts = <2 25>;
-+			clocks = <&clk_uart0 &clk_apb_p>;
-+			clock-names = "uartclk","apb_pclk";
-+			arm,primecell-periphid = <0x00241011>; // For an explanation, see
-+			// https://github.com/raspberrypi/linux/commit/13731d862cf5219216533a3b0de052cee4cc5038
-+			status = "disabled";
-+		};
-+
-+		i2s: i2s@7e203000 {
-+			compatible = "brcm,bcm2708-i2s";
-+			reg = <0x7e203000 0x20>,
-+			      <0x7e101098 0x02>;
-+
-+			//dmas = <&dma 2>,
-+			//       <&dma 3>;
-+			dma-names = "tx", "rx";
-+			status = "disabled";
-+		};
-+
-+		spi0: spi@7e204000 {
-+			compatible = "brcm,bcm2835-spi";
-+			reg = <0x7e204000 0x1000>;
-+			interrupts = <2 22>;
-+			clocks = <&clk_core>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+			/* the dma channels */
-+			dmas = <&dma 6>, <&dma 7>;
-+			dma-names = "tx", "rx";
-+			/* the chipselects used - <0> means native GPIO
-+			 * add more gpios if necessary as <&gpio 6 1>
-+			 * (but do not forget to make them output!)
-+			 */
-+			cs-gpios = <0>, <0>;
-+		};
-+
-+		i2c0: i2c@7e205000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e205000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		uart1: uart@7e215040 {
-+			compatible = "brcm,bcm2835-aux-uart", "ns16550";
-+			reg = <0x7e215040 0x40>;
-+			interrupts = <1 29>;
-+			clock-frequency = <500000000>;
-+			reg-shift = <2>;
-+			no-loopback-test;
-+			status = "disabled";
-+	        };
-+
-+		mmc: mmc@7e300000 {
-+			compatible = "brcm,bcm2835-mmc";
-+			reg = <0x7e300000 0x100>;
-+			interrupts = <2 30>;
-+			clocks = <&clk_mmc>;
-+			dmas = <&dma 11>,
-+			       <&dma 11>;
-+			dma-names = "tx", "rx";
-+			status = "disabled";
-+		};
-+
-+		i2c1: i2c@7e804000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e804000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c2: i2c@7e805000 {
-+			// Beware - this is shared with the HDMI module.
-+			// Careless use may break (really) your display.
-+			// Caveat emptor.
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e805000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		usb: usb@7e980000 {
-+			compatible = "brcm,bcm2708-usb";
-+			reg = <0x7e980000 0x10000>,
-+			      <0x7e006000 0x1000>;
-+			interrupts = <2 0>,
-+				     <1 9>;
-+		};
-+
-+		leds: leds {
-+			compatible = "gpio-leds";
-+		};
-+
-+		fb: fb {
-+			compatible = "brcm,bcm2708-fb";
-+			status = "disabled";
-+		};
-+
-+		vchiq: vchiq {
-+			compatible = "brcm,bcm2835-vchiq";
-+			reg = <0x7e00b840 0xf>;
-+			interrupts = <0 2>;
-+		};
-+
-+		thermal: thermal {
-+			compatible = "brcm,bcm2835-thermal";
-+		};
-+	};
-+
-+	clocks: clocks {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		clk_mmc: clock@0 {
-+			compatible = "fixed-clock";
-+			reg = <0>;
-+			#clock-cells = <0>;
-+			clock-output-names = "mmc";
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_i2c: clock@1 {
-+			compatible = "fixed-clock";
-+			reg = <1>;
-+			#clock-cells = <0>;
-+			clock-output-names = "i2c";
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_core: clock@2 {
-+			compatible = "fixed-clock";
-+			reg = <2>;
-+			#clock-cells = <0>;
-+			clock-output-names = "core";
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_uart0: clock@3 {
-+			compatible = "fixed-clock";
-+			reg = <3>;
-+			#clock-cells = <0>;
-+			clock-output-names = "uart0_pclk";
-+			clock-frequency = <3000000>;
-+		};
-+
-+		clk_apb_p: clock@4 {
-+			compatible = "fixed-clock";
-+			reg = <4>;
-+			#clock-cells = <0>;
-+			clock-output-names = "apb_pclk";
-+			clock-frequency = <126000000>;
-+		};
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2708.dtsi linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708.dtsi
---- linux-4.1.1/arch/arm/boot/dts/bcm2708.dtsi	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708.dtsi	2015-07-07 23:32:47.417460272 -0500
-@@ -0,0 +1,19 @@
-+/include/ "bcm2708_common.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "BCM2708";
-+
-+	chosen {
-+		/* No padding required - the boot loader can do that. */
-+		bootargs = "";
-+	};
-+
-+	soc {
-+		ranges = <0x7e000000 0x20000000 0x01000000>;
-+
-+		arm-pmu {
-+			compatible = "arm,arm1176-pmu";
-+		};
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-b.dts linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-b.dts
---- linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-b.dts	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-b.dts	2015-07-07 23:38:20.365468706 -0500
-@@ -0,0 +1,119 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "Raspberry Pi Model B";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <28 29 30 31>;
-+		brcm,function = <6>; /* alt2 */
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 16 1>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		uart1_clkrate = <&uart1>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+		core_freq = <&clk_core>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		audio = <&audio>,"status";
-+		watchdog = <&watchdog>,"status";
-+		random = <&random>,"status";
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
---- linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts	2015-07-07 23:38:20.365468706 -0500
-@@ -0,0 +1,129 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "Raspberry Pi Model B+";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		uart1_clkrate = <&uart1>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+		core_freq = <&clk_core>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+
-+		audio = <&audio>,"status";
-+		watchdog = <&watchdog>,"status";
-+		random = <&random>,"status";
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-cm.dts linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-cm.dts
---- linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-cm.dts	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-cm.dts	2015-07-07 23:38:20.365468706 -0500
-@@ -0,0 +1,93 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708-rpi-cm.dtsi"
-+
-+/ {
-+	model = "Raspberry Pi Compute Module";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		uart1_clkrate = <&uart1>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+		core_freq = <&clk_core>,"clock-frequency:0";
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi
---- linux-4.1.1/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi	2015-07-07 23:32:47.417460272 -0500
-@@ -0,0 +1,30 @@
-+/include/ "bcm2708.dtsi"
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&audio {
-+	status = "okay";
-+};
-+
-+/ {
-+	__overrides__ {
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2709.dtsi linux-rpi-4.1.x/arch/arm/boot/dts/bcm2709.dtsi
---- linux-4.1.1/arch/arm/boot/dts/bcm2709.dtsi	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2709.dtsi	2015-07-07 23:32:47.417460272 -0500
-@@ -0,0 +1,70 @@
-+/include/ "bcm2708_common.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2709";
-+	model = "BCM2709";
-+
-+	chosen {
-+		/* No padding required - the boot loader can do that. */
-+		bootargs = "";
-+	};
-+
-+	soc {
-+		ranges = <0x7e000000 0x3f000000 0x01000000>;
-+
-+		arm-pmu {
-+			compatible = "arm,cortex-a7-pmu";
-+			interrupts = <3 9>;
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv7-timer";
-+		clock-frequency = <19200000>;
-+		interrupts = <3 0>, // PHYS_SECURE_PPI
-+			     <3 1>, // PHYS_NONSECURE_PPI
-+			     <3 3>, // VIRT_PPI
-+			     <3 2>; // HYP_PPI
-+		always-on;
-+	};
-+
-+	cpus: cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		v7_cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf00>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf01>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu2: cpu@2 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf02>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu3: cpu@3 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf03>;
-+			clock-frequency = <800000000>;
-+		};
-+	};
-+
-+	__overrides__ {
-+		arm_freq = <&v7_cpu0>, "clock-frequency:0",
-+		       <&v7_cpu1>, "clock-frequency:0",
-+		       <&v7_cpu2>, "clock-frequency:0",
-+		       <&v7_cpu3>, "clock-frequency:0";
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2709-rpi-2-b.dts linux-rpi-4.1.x/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
---- linux-4.1.1/arch/arm/boot/dts/bcm2709-rpi-2-b.dts	1969-12-31 18:00:00.000000000 -0600
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2709-rpi-2-b.dts	2015-07-07 23:32:47.417460272 -0500
-@@ -0,0 +1,129 @@
-+/dts-v1/;
-+
-+/include/ "bcm2709.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2709";
-+	model = "Raspberry Pi 2 Model B";
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&mmc {
-+	status = "okay";
-+	bus-width = <4>;
-+};
-+
-+&fb {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		uart0 = <&uart0>,"status";
-+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+		uart1_clkrate = <&uart1>,"clock-frequency:0";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+		core_freq = <&clk_core>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+
-+		audio = <&audio>,"status";
-+		watchdog = <&watchdog>,"status";
-+		random = <&random>,"status";
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2835.dtsi linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835.dtsi
---- linux-4.1.1/arch/arm/boot/dts/bcm2835.dtsi	2015-06-29 14:55:35.000000000 -0500
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835.dtsi	2015-07-07 23:32:47.421460273 -0500
-@@ -6,14 +6,15 @@
- 	interrupt-parent = <&intc>;
- 
- 	chosen {
--		bootargs = "earlyprintk console=ttyAMA0";
-+		bootargs = "";
- 	};
- 
--	soc {
-+	soc: soc {
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 		ranges = <0x7e000000 0x20000000 0x02000000>;
-+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
- 
- 		timer@7e003000 {
- 			compatible = "brcm,bcm2835-system-timer";
-@@ -50,16 +51,22 @@
- 			#interrupt-cells = <2>;
- 		};
- 
--		watchdog@7e100000 {
-+		watchdog: watchdog@7e100000 {
- 			compatible = "brcm,bcm2835-pm-wdt";
- 			reg = <0x7e100000 0x28>;
- 		};
- 
--		rng@7e104000 {
-+		random: rng@7e104000 {
- 			compatible = "brcm,bcm2835-rng";
- 			reg = <0x7e104000 0x10>;
- 		};
- 
-+		mailbox: mailbox@7e00b800 {
-+			compatible = "brcm,bcm2708-vcio";
-+			reg = <0x7e00b880 0x40>;
-+			interrupts = <0 1>;
-+		};
-+
- 		gpio: gpio@7e200000 {
- 			compatible = "brcm,bcm2835-gpio";
- 			reg = <0x7e200000 0xb4>;
-@@ -83,7 +90,7 @@
- 			#interrupt-cells = <2>;
- 		};
- 
--		uart@7e201000 {
-+		uart0: uart@7e201000 {
- 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
- 			reg = <0x7e201000 0x1000>;
- 			interrupts = <2 25>;
-@@ -102,7 +109,7 @@
- 			status = "disabled";
- 		};
- 
--		spi: spi@7e204000 {
-+		spi0: spi@7e204000 {
- 			compatible = "brcm,bcm2835-spi";
- 			reg = <0x7e204000 0x1000>;
- 			interrupts = <2 22>;
-@@ -122,11 +129,14 @@
- 			status = "disabled";
- 		};
- 
--		sdhci: sdhci@7e300000 {
--			compatible = "brcm,bcm2835-sdhci";
-+		mmc: mmc@7e300000 {
-+			compatible = "brcm,bcm2835-mmc";
- 			reg = <0x7e300000 0x100>;
- 			interrupts = <2 30>;
- 			clocks = <&clk_mmc>;
-+			dmas = <&dma 11>,
-+			       <&dma 11>;
-+			dma-names = "tx", "rx";
- 			status = "disabled";
- 		};
- 
-@@ -140,7 +150,7 @@
- 			status = "disabled";
- 		};
- 
--		usb@7e980000 {
-+		usb: usb@7e980000 {
- 			compatible = "brcm,bcm2835-usb";
- 			reg = <0x7e980000 0x10000>;
- 			interrupts = <1 9>;
-@@ -149,6 +159,21 @@
- 		arm-pmu {
- 			compatible = "arm,arm1176-pmu";
- 		};
-+
-+		fb: fb {
-+			compatible = "brcm,bcm2708-fb";
-+			status = "disabled";
-+		};
-+
-+		vchiq: vchiq {
-+			compatible = "brcm,bcm2835-vchiq";
-+			reg = <0x7e00b840 0xf>;
-+			interrupts = <0 2>;
-+		};
-+
-+		thermal: thermal {
-+			compatible = "brcm,bcm2835-thermal";
-+		};
- 	};
- 
- 	clocks {
-@@ -161,7 +186,7 @@
- 			reg = <0>;
- 			#clock-cells = <0>;
- 			clock-output-names = "mmc";
--			clock-frequency = <100000000>;
-+			clock-frequency = <250000000>;
- 		};
- 
- 		clk_i2c: clock@1 {
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835-rpi-b.dts
---- linux-4.1.1/arch/arm/boot/dts/bcm2835-rpi-b.dts	2015-06-29 14:55:35.000000000 -0500
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835-rpi-b.dts	2015-07-07 23:32:47.421460273 -0500
-@@ -5,19 +5,28 @@
- 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
- 	model = "Raspberry Pi Model B";
- 
--	leds {
--		act {
--			gpios = <&gpio 16 1>;
--		};
--	};
- };
- 
- &gpio {
--	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
--
--	/* I2S interface */
--	i2s_alt2: i2s_alt2 {
-+	i2s_pins: i2s {
- 		brcm,pins = <28 29 30 31>;
--		brcm,function = <6>; /* alt2 */
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&act_led {
-+	gpios = <&gpio 16 1>;
-+};
-+
-+/ {
-+	__overrides__ {
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
- 	};
- };
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
---- linux-4.1.1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts	2015-06-29 14:55:35.000000000 -0500
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts	2015-07-07 23:32:47.421460273 -0500
-@@ -4,27 +4,40 @@
- / {
- 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
- 	model = "Raspberry Pi Model B+";
--
--	leds {
--		act {
--			gpios = <&gpio 47 0>;
--		};
--
--		pwr {
--			label = "PWR";
--			gpios = <&gpio 35 0>;
--			default-state = "keep";
--			linux,default-trigger = "default-on";
--		};
--	};
- };
- 
- &gpio {
--	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
--
--	/* I2S interface */
--	i2s_alt0: i2s_alt0 {
-+	i2s_pins: i2s {
- 		brcm,pins = <18 19 20 21>;
- 		brcm,function = <4>; /* alt0 */
- 	};
- };
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&act_led {
-+	gpios = <&gpio 47 0>;
-+};
-+
-+&leds {
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+	};
-+};
-diff -Nur linux-4.1.1/arch/arm/boot/dts/bcm2835-rpi.dtsi linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835-rpi.dtsi
---- linux-4.1.1/arch/arm/boot/dts/bcm2835-rpi.dtsi	2015-06-29 14:55:35.000000000 -0500
-+++ linux-rpi-4.1.x/arch/arm/boot/dts/bcm2835-rpi.dtsi	2015-07-07 23:32:47.421460273 -0500
-@@ -1,51 +1,112 @@
- /include/ "bcm2835.dtsi"
- 
- / {
-+	/* This is left here in case u-boot needs it */
- 	memory {
- 		reg = <0 0x10000000>;
- 	};
- 
--	leds {
-+	aliases {
-+		soc = &soc;
-+		spi0 = &spi0;
-+		i2c0 = &i2c0;
-+		i2c1 = &i2c1;
-+		i2s  = &i2s;
-+		gpio = &gpio;
-+		intc = &intc;
-+		leds = &leds;
-+		sound = &sound;
-+	};
-+
-+	leds: leds {
- 		compatible = "gpio-leds";
- 
--		act {
--			label = "ACT";
--			default-state = "keep";
--			linux,default-trigger = "heartbeat";
-+		act_led: act {
-+			label = "led0";
-+			linux,default-trigger = "mmc0";
- 		};
- 	};
-+
-+	/* Onboard audio */
-+	audio: audio {
-+		compatible = "brcm,bcm2835-audio";
-+		brcm,pwm-channels = <8>;
-+		status = "disabled";
-+	};
-+
-+	/* External sound card */
-+	sound: sound {
-+	};
- };
- 
- &gpio {
--	pinctrl-names = "default";
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
- 
--	gpioout: gpioout {
--		brcm,pins = <6>;
--		brcm,function = <1>; /* GPIO out */
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
- 	};
- 
--	alt0: alt0 {
--		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
--		brcm,function = <4>; /* alt0 */
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
- 	};
- 
--	alt3: alt3 {
--		brcm,pins = <48 49 50 51 52 53>;
--		brcm,function = <7>; /* alt3 */
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
- 	};
- };
- 
- &i2c0 {
--	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
- 	clock-frequency = <100000>;
- };
- 
- &i2c1 {
--	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i