µ C l i b c

uClibc -- a C library for embedded systems
uClibc (aka µClibc/pronounced yew-see-lib-see) is a C library for developing embedded Linux systems. It is much smaller than the GNU C Library, but nearly all applications supported by glibc also work perfectly with uClibc. Porting applications from glibc to uClibc typically involves just recompiling the source code. uClibc even supports shared libraries and threading. It currently runs on standard Linux and MMU-less (also known as µClinux) systems with support for alpha, ARM, cris, i386, i960, h8300, m68k, mips/mipsel, PowerPC, SH, SPARC, and v850 processors.

If you are building an embedded Linux system and you find that glibc is eating up too much space, you should consider using uClibc. If you are building a huge fileserver with 12 Terabytes of storage, then using glibc may make more sense. Unless, for example, that 12 Terabytes will be Network Attached Storage and you plan to burn Linux into the system's firmware...

uClibc is maintained by Erik Andersen and is licensed under the GNU LIBRARY GENERAL PUBLIC LICENSE . This license allows you to make closed source commercial applications using uClibc (Please consider sharing some of the money you make ;-). You do not need to give away all your source code just because you use uClibc and/or run on Linux.

Mailing List Information

uClibc has a mailing list.
To subscribe, go and visit this page.

Frequently Asked Questions

Before asking questions on the uClibc mailing list, you might want to take a look at the list of Frequently Asked Questions or you might want to search the mailing list archives...
Google  ...

Working Applications List

These days, pretty much everything compiles with uClibc. This is a list of applications that are known to work just fine with uClibc. Since most applications work just fine with uClibc, we are especially interested in knowing about any applications that either do not compile or do not work properly with uClibc. Submissions are welcome!
Latest News

  • 30 September 2003, dev systems updated to uClibc 0.9.21+
    The uClibc development systems for i386, powerpc, arm, mips, have been updated to uClibc 0.9.21 (plus all the CVS updates up to today). Several problems have been fixed up, gcc has been updated to version 3.3.1, binutils was updated, and tada everything finally works for cross compiling. These were all cross compiled (which really makes things faster since the older mipsel releases used to take 2 days to build!)

    This is an ~100 MB ext2 filesystem that runs natively on the specified architecture. It contains all the development software you need to build your own uClibc applications, including bash, coreutils, findutils, diffutils, patch, sed, ed, flex, bison, file, gawk, tar, grep gdb, strace, make, gcc, g++, autoconf, automake, ncurses, zlib, openssl, openssh perl, and more. And of course, everything is dynamically linked against uClibc. By using a uClibc only system, you can avoid all the painful cross-configuration problems that have made using uClibc somewhat painful in the past. If you want to quickly get started with testing or using uClibc you should give these images a try. You can loop mount and them you can chroot into them, you can boot into with using user-mode Linux, and you can even 'dd' them to a spare partition and use resize2fs to make them fill the drive. Whatever works for you.

    If you would like to build your own custom uClibc system, you can use buildroot, which is how these uClibc development systems were created.

  • 9 September 2003, uClibc 0.9.21 Released
    CodePoet Consulting is pleased to announce the immediate availability of uClibc 0.9.21. This release has been brewing for several months now, and provides quite a lot of additional functionality and quite a few bug fixes as well. Many people will be pleased that this release fixes the "dlopen()'ing libraries that depend on libraries" problem.

    The biggest thing in this release (and I do mean that literally) is that uClibc now has full ANSI/ISO C99 locale support. Well, except for wcsftime() and collating items in regex, which are not done yet. Adding support for the default set of locales (169 UTF-8 locales and 144 locales using other codesets) will enlarge uClibc by around 300k. Still, if you need locale support, that is still much better than the roughly 30MB the comparable set of locale date occupies with glibc. And you can of course reduce the 300k by reducing the number of supported locales.

    As usual, this release has many improvements, both large and small. At this point, most applications that compile and work with glibc will also compile and run with uClibc. Both Perl and Python pass all the tests in their test suites (both with and without locale support enabled). We invite you to grab a copy of the latest Linux Test Project test suite and give uClibc some abuse. We are not yet perfect, but we are getting pretty darn close.

    This release is not binary compatible with earlier releases. Depending on your configuration, you may actually still be binary compatible, but it would be a good idea to recompile your applications when moving to the uClibc 0.9.21 release. We are sorry about that, but we have never promised to provide binary compatibility until we hit version 1.0. And even then, if you change your uClibc configuration, you still still generally need to recompile...

    As usual, the Changelog, detailed changelog, and source code for this release are available here.

    Updated uClibc development systems using uClibc 0.9.21 will be made available within a few days.

  • Old News
    Click here to read older news.

Sponsors
Please visit our sponsors and thank them for their support! They have provided money, equipment, bandwidth, etc. Next time you need help with a project, consider these fine companies! Several individuals have also contributed (If you have contributed and would like your name added here, just email Erik and let him know).
Do you like uClibc? Do you need support? Do you need some features added? Then why not help out? We are happy to accept donations (such as bandwidth, mirrors sites, and hardware for the various architectures). We can also provide support contracts, and implement funded feature requests. To contribute, you can either click on the Donate image to donate using PayPal, or you can contact Erik at CodePoet Consulting (we have a credit card machine so you can avoid PayPal if you wish).
Download
Toolchains
  • Steven J. Hill has kindly provided RPMs and SRPMs with toolchains for mips.
  • You can build your own uClibc toolchain using these Makefiles which automagically download all the source needed code and compile it for you.
  • uClibc development systems for i386 and powerpc, and arm are available and contain complete gcc 3.2.2 toolchains.
  • You can compile your own uClibc development system using buildroot.
Other Open Source C libraries:
I am currently aware of the following open source C libraries.
Links to other useful stuff


Mail all comments, insults, suggestions and bribes to Erik Andersen
This site created with the vi editor Graphics by GIMP Linux Today

Slashdot

Freshmeat