# Makefile for uClibc # # Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org> # # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. # #-------------------------------------------------------------- # You shouldn't need to mess with anything beyond this point... #-------------------------------------------------------------- include $(top_srcdir)Rules.mak sub_headers := headers ifeq ($(HAVE_DOT_CONFIG),y) all: pregen libs startfiles libs: pregen # In this section, we need .config -include $(top_builddir).config.cmd else # ifeq ($(HAVE_DOT_CONFIG),y) all: menuconfig headers: @echo "Need to make a config file first, run: make menuconfig" @false endif # ifeq ($(HAVE_DOT_CONFIG),y) include $(top_srcdir)extra/locale/Makefile.in include $(top_srcdir)ldso/Makefile.in include $(top_srcdir)libcrypt/Makefile.in include $(top_srcdir)libm/Makefile.in include $(top_srcdir)libutil/Makefile.in include $(top_srcdir)libpthread/Makefile.in include $(top_srcdir)librt/Makefile.in include $(top_srcdir)libuargp/Makefile.in include $(top_srcdir)libubacktrace/Makefile.in include $(top_srcdir)libiconv/Makefile.in include $(top_srcdir)libintl/Makefile.in # last included to catch all the objects added by others (locales/threads) include $(top_srcdir)libc/Makefile.in conf := $(top_builddir)extra/config/conf mconf := $(top_builddir)extra/config/mconf nconf := $(top_builddir)extra/config/nconf ifeq ($(HAVE_DOT_CONFIG),y) # If the .config changes then we have to make sure that our includes are # updated properly. This would normally work by saying that the headers # have uClibc_config.h as prerequisite but since we _symlink_ the headers # and do not (?) want to rely on 'make -L' we better update them right here, # on spot to save us from alot of hazzle. $(top_builddir)include/bits/uClibc_config.h: $(conf) $(KCONFIG_CONFIG) $(top_srcdir)extra/scripts/conf-header.sh | $(top_builddir)include/bits @$(disp_gen) $(Q)$< -s $(Kconfig) $(Q)$(top_srcdir)extra/scripts/conf-header.sh $(KCONFIG_CONFIG) > $@.tmp $(Q)$(MAKE) headers-y $(Q)mv $@.tmp $@ # The above doesn't work for threads, though. Just using check-symlinks for now. # XXX: FIXME: this is ugly MAKEFLAGS += -L $(top_builddir)include/config/linuxthreads/old.h $(top_builddir)include/config/linuxthreads/new.h: @true $(top_builddir)include/generated/unifdef_config.h: $(top_builddir)include/bits/uClibc_config.h | $(top_builddir)include/generated @$(disp_gen) $(Q)$(SED) -e '1,3d' $^ > $@ # For the moment, we have to keep re-running this target # because the fix includes scripts rely on pre-processers # in order to generate the headers correctly :(. That # means we can't use the $(HOSTCC) in order to get the # correct output. ifeq ($(ARCH_USE_MMU),y) export header_extra_args = else export header_extra_args = -n endif HEADERS_BITS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/bits/*.h)) ifneq ($(ARCH_HAS_DEPRECATED_SYSCALLS),y) HEADERS_BITS_COMMON_NO_LEGACY := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common-generic/bits/*.h)) HEADERS_BITS_COMMON := $(filter-out $(HEADERS_BITS_COMMON_NO_LEGACY),$(HEADERS_BITS_COMMON)) ALL_HEADERS_BITS_COMMON_NO_LEGACY := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_COMMON_NO_LEGACY)) endif HEADERS_BITS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/*.h)) HEADERS_BITS_SUBARCH := ifneq ($(TARGET_SUBARCH),) HEADERS_BITS_SUBARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/*.h)) endif ifneq ($(HEADERS_BITS_PTHREAD),) HEADERS_BITS_ARCH := $(filter-out $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_ARCH)) HEADERS_BITS_SUBARCH:= $(filter-out $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_SUBARCH)) endif HEADERS_BITS_COMMON := $(filter-out $(HEADERS_BITS_ARCH) $(HEADERS_BITS_SUBARCH) $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_COMMON)) HEADERS_SYS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/sys/*.h)) HEADERS_SYS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/*.h)) HEADERS_SYS_COMMON := $(filter-out $(HEADERS_SYS_ARCH),$(HEADERS_SYS_COMMON)) ALL_HEADERS_COMMON := $(top_builddir)include/fpu_control.h \ $(top_builddir)include/jmpbuf-offsets.h \ $(top_builddir)include/jmpbuf-unwind.h \ $(top_builddir)include/dl-osinfo.h \ $(top_builddir)include/not-cancel.h ALL_HEADERS_BITS_COMMON := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_COMMON)) ALL_HEADERS_BITS_ARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_ARCH)) ifneq ($(TARGET_SUBARCH),) ALL_HEADERS_BITS_SUBARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_SUBARCH)) else ALL_HEADERS_BITS_SUBARCH := endif ALL_HEADERS_SYS_COMMON := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_COMMON)) ALL_HEADERS_SYS_ARCH := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_ARCH)) target-headers-sysdep := \ $(ALL_HEADERS_COMMON) \ $(ALL_HEADERS_BITS_COMMON) \ $(ALL_HEADERS_BITS_ARCH) \ $(ALL_HEADERS_BITS_SUBARCH) \ $(ALL_HEADERS_SYS_COMMON) \ $(ALL_HEADERS_SYS_ARCH) \ $(ALL_HEADERS_BITS_PTHREAD) ifneq ($(ARCH_HAS_DEPRECATED_SYSCALLS),y) target-headers-sysdep += $(ALL_HEADERS_BITS_COMMON_NO_LEGACY) endif $(top_builddir)include/fpu_control.h $(top_builddir)include/jmpbuf-offsets.h $(top_builddir)include/jmpbuf-unwind.h: @$(disp_ln) $(Q)[ -r $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) ] && \ $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) $@ || \ $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@ $(top_builddir)include/dl-osinfo.h $(top_builddir)include/not-cancel.h: $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@ $(ALL_HEADERS_BITS_COMMON): $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/bits/$(@F) $@ $(ALL_HEADERS_BITS_ARCH): $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(@F) $@ ifneq ($(ARCH_HAS_DEPRECATED_SYSCALLS),y) $(ALL_HEADERS_BITS_COMMON_NO_LEGACY): $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common-generic/bits/$(@F) $@ endif ifneq ($(TARGET_SUBARCH),) $(ALL_HEADERS_BITS_SUBARCH): $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/$(@F) $@ endif ifneq ($(strip $(ALL_HEADERS_SYS_COMMON)),) $(ALL_HEADERS_SYS_COMMON): $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/sys/$(@F) $@ endif ifneq ($(strip $(ALL_HEADERS_SYS_ARCH)),) $(ALL_HEADERS_SYS_ARCH): $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/$(@F) $@ endif $(target-headers-sysdep) $(pregen-headers-y): | $(top_builddir)include/bits $(top_builddir)include/sys $(top_builddir)include/bits/sysnum.h HEADERCLEAN_common: $(do_rm) $(ALL_HEADERS_COMMON) headers_clean-y += HEADERCLEAN_common HEADERCLEAN_config: $(do_rm) -r $(addprefix $(top_builddir)include/,config generated) menuconfig-clean-y: HEADERCLEAN_config # The headers. Arch specific headers are specified via ARCH_HEADERS in # libc/sysdeps/linux/$(TARGET_ARCH)/Makefile.arch which appends those via # libc/sysdeps/linux/Makefile.commonarch to headers-y headers-y += $(target-headers-sysdep) headers: $(top_builddir)include/bits/uClibc_config.h | subdirs $(top_builddir)extra/locale $(Q)$(if $(UCLIBC_HAS_LOCALE),$(MAKE) -C extra/locale locale_headers) subdirs: $(addprefix $(top_builddir),$(subdirs)) $(pregen-headers-y): $(headers_dep) pregen: headers $(pregen-headers-y) $(headers_dep) $(top_builddir)include/bits/sysnum.h: $(top_srcdir)extra/scripts/gen_bits_syscall_h.sh | $(top_builddir)include/bits @$(disp_gen) $(Q)set -e; \ KERNEL_HEADERS="${KERNEL_HEADERS}" CC="$(CC) $(CPU_CFLAGS)" $(SHELL) $< > $@.new; \ cmp -s $@ $@.new && $(RM) $@.new || mv -f $@.new $@ @# Ugly linux specific hack.. $(Q)if grep -q __NR_ $@; then true; else \ rm -f $@; \ echo "ERROR: Could not generate syscalls."; \ echo "Make sure that you have properly installed kernel headers."; \ echo "Your .config KERNEL_HEADERS=\"\" was set to:"; \ echo "${KERNEL_HEADERS}"; \ exit 1; \ fi .PHONY: $(LOCAL_INSTALL_PATH) $(LOCAL_INSTALL_PATH): $(Q)$(MAKE) PREFIX=$(LOCAL_INSTALL_PATH) \ RUNTIME_PREFIX=/ \ DEVEL_PREFIX=/usr/ \ HOSTCC="$(HOSTCC)" \ install install: install_runtime install_dev RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB=$(shell $(top_srcdir)extra/scripts/relative_path.sh $(DEVEL_PREFIX)$(MULTILIB_DIR) $(RUNTIME_PREFIX)$(MULTILIB_DIR)) $(top_builddir)extra/scripts/unifdef: |$(top_builddir)extra/scripts $(top_builddir)extra/scripts/unifdef: $(top_srcdir)extra/scripts/unifdef.c $(hcompile.u) # Installs header files. # a "y" here means the feature is enabled and so we should *not* rm it. # if the option expands to nothing though, we can punt the headers. HEADERS_RM- := \ config \ generated \ internal \ cancel.h \ dl-osinfo.h \ jmpbuf-offsets.h \ jmpbuf-unwind.h \ not-cancel.h \ _lfs_64.h \ bits/uClibc_arch_features.h \ bits/kernel_sigaction.h \ bits/kernel_stat.h \ bits/kernel_types.h \ bits/libc-lock.h \ bits/stdio-lock.h \ bits/syscalls.h \ bits/syscalls-common.h \ bits/uClibc_fpmax.h \ bits/uClibc_mutex.h \ bits/uClibc_pthread.h \ bits/uClibc_uintmaxtostr.h \ bits/uClibc_uwchar.h \ bits/uClibc_va_copy.h \ bits/sigcontextinfo.h \ bits/stackinfo.h \ atomic.h \ bits/atomic.h \ tls.h ifeq ($(UCLIBC_STRICT_HEADERS),y) HEADERS_RM- += sgtty.h endif HEADERS_RM-$(HAVE_SHARED) += dlfcn.h bits/dlfcn.h HEADERS_RM-$(PTHREADS_DEBUG_SUPPORT) += thread_db.h HEADERS_RM-$(UCLIBC_HAS_ARGP) += argp.h HEADERS_RM-$(UCLIBC_HAS_BSD_ERR) += err.h HEADERS_RM-$(UCLIBC_HAS_CRYPT) += crypt.h HEADERS_RM-$(UCLIBC_HAS_EPOLL) += sys/epoll.h HEADERS_RM-$(UCLIBC_HAS_FENV) += fenv.h bits/fenv.h bits/fenvinline.h HEADERS_RM-$(UCLIBC_HAS_FLOATS) += complex.h fpu_control.h ieee754.h \ math.h \ tgmath.h \ bits/math*.h HEADERS_RM-$(findstring y,$(UCLIBC_HAS_FTW)$(UCLIBC_HAS_NFTW)) += ftw.h HEADERS_RM-$(UCLIBC_HAS_FTS) += fts.h HEADERS_RM-$(UCLIBC_HAS_GLIBC_CUSTOM_PRINTF) += printf.h HEADERS_RM-$(UCLIBC_HAS_GLOB) += glob.h HEADERS_RM-$(UCLIBC_HAS_GNU_ERROR) += error.h HEADERS_RM-$(UCLIBC_HAS_GETOPT_LONG) += getopt.h HEADERS_RM-$(UCLIBC_HAS_IPV6) += netinet/ip6.h netinet/icmp6.h HEADERS_RM-$(UCLIBC_HAS_BACKTRACE) += execinfo.h HEADERS_RM-$(UCLIBC_HAS_LIBICONV) += iconv.h HEADERS_RM-$(UCLIBC_HAS_LIBINTL) += libintl.h HEADERS_RM-$(UCLIBC_HAS_LOCALE) += bits/uClibc_ctype.h HEADERS_RM-$(UCLIBC_HAS_PTY) += pty.h HEADERS_RM-$(UCLIBC_HAS_REALTIME) += mqueue.h bits/mqueue.h sched.h \ bits/sched.h \ semaphore.h HEADERS_RM-$(UCLIBC_HAS_REGEX) += regex.h regexp.h HEADERS_RM-$(UCLIBC_HAS_SHADOW) += shadow.h HEADERS_RM-$(UCLIBC_HAS_SOCKET) += sys/socket.h bits/socket.h sys/socketvar.h bits/socket_type.h HEADERS_RM-$(UCLIBC_HAS_SYSLOG) += syslog.h sys/syslog.h bits/syslog*.h HEADERS_RM-$(UCLIBC_HAS_THREADS) += *thread*.h semaphore.h \ bits/*thread*.h \ bits/initspin.h HEADERS_RM-$(UCLIBC_HAS_THREADS_NATIVE) += atomic.h bits/atomic.h HEADERS_RM-$(UCLIBC_HAS_UTMP) += bits/utmp.h utmp.h HEADERS_RM-$(UCLIBC_HAS_UTMPX) += bits/utmpx.h utmpx.h HEADERS_RM-$(UCLIBC_HAS_WCHAR) += wchar.h wctype.h HEADERS_RM-$(UCLIBC_HAS_WORDEXP) += wordexp.h HEADERS_RM-$(UCLIBC_HAS_XATTR) += sys/xattr.h HEADERS_RM-$(UCLIBC_HAS_XLOCALE) += xlocale.h HEADERS_RM-$(UCLIBC_LINUX_SPECIFIC) += \ sys/cachectl.h \ bits/eventfd.h \ sys/eventfd.h \ sys/fsuid.h \ bits/inotify.h \ sys/inotify.h \ sys/kdaemon.h \ sys/perm.h \ sys/personality.h \ sys/prctl.h \ sys/random.h \ sys/reboot.h \ sys/sendfile.h \ bits/signalfd.h \ sys/signalfd.h \ bits/statfs.h \ sys/statfs.h \ sys/swap.h \ sys/sysctl.h \ sys/sysinfo.h \ bits/timerfd.h \ sys/timerfd.h \ sys/sysmips.h \ sys/vfs.h HEADERS_RM-$(UCLIBC_SUPPORT_AI_ADDRCONFIG) += ifaddrs.h HEADERS_RM-$(UCLIBC_SV4_DEPRECATED) += ustat.h sys/ustat.h bits/ustat.h HEADERS_RM-$(UCLIBC_SUSV3_LEGACY) += sys/timeb.h regexp.h HEADERS_RM-$(UCLIBC_SUSV4_LEGACY) += utime.h ucontext.h HEADERS_RM-$(UCLIBC_HAS_ADVANCED_REALTIME) += spawn.h ifneq ($(findstring install,$(MAKECMDGOALS)),) $(addprefix $(PREFIX)$(DEVEL_PREFIX),include $(MULTILIB_DIR)): $(do_mkdir) # avoid warning about duplicate targets in rule or overrides ifneq ($(abspath $(RUNTIME_PREFIX)$(MULTILIB_DIR)),$(abspath $(DEVEL_PREFIX)$(MULTILIB_DIR))) $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR): $(do_mkdir) endif endif install_headers: headers $(top_builddir)extra/scripts/unifdef $(top_builddir)include/generated/unifdef_config.h | $(PREFIX)$(DEVEL_PREFIX)include @$(call disp_install,"include -> $(PREFIX)$(DEVEL_PREFIX)include") $(Q)top_builddir=$(top_builddir) \ $(top_srcdir)extra/scripts/install_headers.sh \ include $(PREFIX)$(DEVEL_PREFIX)include ifneq ($(O),) # only run this step in O is set i.e. make O=/my/builddir/ .. @$(call disp_install,"$(top_builddir)/include -> $(PREFIX)$(DEVEL_PREFIX)include") $(Q)top_builddir=$(top_builddir) \ $(top_srcdir)extra/scripts/install_headers.sh \ $(top_builddir)/include $(PREFIX)$(DEVEL_PREFIX)include endif $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -r $(HEADERS_RM-) ifeq ($(UCLIBC_HAS_WCHAR),) $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && mv -f wchar-stub.h wchar.h else $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -f wchar-stub.h endif EMPTY_LIB_NAMES = dl nsl resolv ifeq ($(DO_C99_MATH),y) EMPTY_LIB_NAMES += m endif ifeq ($(UCLIBC_HAS_THREADS),y) EMPTY_LIB_NAMES += pthread endif ifeq ($(UCLIBC_HAS_REALTIME),y) EMPTY_LIB_NAMES += rt endif ifeq ($(UCLIBC_HAS_CRYPT),y) EMPTY_LIB_NAMES += crypt endif ifeq ($(UCLIBC_HAS_LIBUTIL),y) EMPTY_LIB_NAMES += util endif ifeq ($(UCLIBC_HAS_LIBICONV),y) EMPTY_LIB_NAMES += iconv endif ifeq ($(UCLIBC_HAS_LIBINTL),y) EMPTY_LIB_NAMES += intl endif EMPTY_LIBS = $(EMPTY_LIB_NAMES:%=lib/lib%.a) $(EMPTY_LIBS): rm -f $(top_builddir)$@ $(AR) rc $(top_builddir)$@ # Installs startfiles install_startfiles: startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR) -$(INSTALL) -m 644 $(startfiles) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/ # Installs development library links. install_dev: install_headers install_runtime install_startfiles $(EMPTY_LIBS) | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR) -$(INSTALL) -m 644 $(top_builddir)lib/*.a $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/ ifeq ($(HAVE_SHARED),y) for i in `cd $(top_builddir) && find lib/ -type l -name 'lib[a-zA-Z]*.so' | \ $(SED) -e 's/lib\///'` ; do \ $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)$$i.$(ABI_VERSION) \ $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/$$i; \ done ifeq ($(HARDWIRED_ABSPATH),y) if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \ $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \ $(SED) -e 's:$(NONSHARED_LIBNAME):$(DEVEL_PREFIX)$(MULTILIB_DIR)/$(NONSHARED_LIBNAME):' \ -e 's:$(SHARED_LIBNAME):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME):' \ -e 's:$(UCLIBC_LDSO):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(UCLIBC_LDSO):' \ $(top_builddir)lib/libc.so > $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \ $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \ fi else -$(INSTALL) -m 755 $(top_builddir)lib/libc.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/ endif echo "$(UBACKTRACE_ASNEEDED)" >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so ifeq ($(PTHREADS_DEBUG_SUPPORT),y) $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)libthread_db.so.1 \ $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libthread_db.so endif ifeq ($(DOPIC),y) # # If we build shared libraries then the static libs are PIC... # # Make _pic.a symlinks to make mklibs.py and similar tools happy. if [ -d $(top_builddir)lib ] ; then \ for i in `cd $(top_builddir) && find lib/ -type f -name 'lib*.a' | $(SED) -e 's/lib\///'` ; do \ $(LN) -sf $$i $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/`echo $$i \ | $(SED) -e 's/\.a$$/_pic.a/'`; \ done ; \ fi endif endif ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y) for file in $(top_builddir)lib/lib*.gdb; do \ if test -f $$file; then \ $(INSTALL) -m 755 $$file $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \ $(INSTALL) -m 755 `echo $$file | $(SED) 's/\.gdb$$//'` \ $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \ fi; \ done endif # Installs run-time libraries install_runtime: all | $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR) ifeq ($(HAVE_SHARED),y) $(INSTALL) -m 755 $(top_builddir)lib/lib*-$(VERSION).so \ $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR) (cd $(top_builddir)lib && $(TAR) --exclude=$(UCLIBC_LDSO_NAME).so.lds -cf - *.so.*) \ | $(TAR) -xf - -C $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR) @if [ -x $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so ] ; then \ set -e; \ $(SHELL_SET_X); \ $(INSTALL) -m 755 $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so \ $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR); \ fi endif utils: | pregen $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils $@ # Installs helper applications, such as 'ldd' and 'ldconfig' install_utils: utils $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils utils_install endif # ifeq ($(HAVE_DOT_CONFIG),y) hostutils: | pregen $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils $@ install_hostutils: hostutils $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils utils_install $(addprefix $(top_builddir),include include/bits include/sys include/config include/generated lib extra/config/lxdialog extra/locale extra/scripts $(subdirs)): $(do_mkdir) # configuration # --------------------------------------------------------------------------- $(conf) $(mconf) $(nconf): | $(top_builddir)include/config $(top_builddir)include/generated $(top_builddir)extra/config/lxdialog $(Q)$(MAKE) -C extra/config $(@F) arch-defconfigs := $(notdir $(wildcard $(top_srcdir)extra/Configs/defconfigs/$(ARCH)/*_defconfig)) menuconfig: $(mconf) $(Q)$< $(Kconfig) config: $(conf) $(Q)$< $(Kconfig) nconfig: $(nconf) $(Q)$< $(Kconfig) oldaskconfig: $(conf) $(Q)$< -a $(Kconfig) silentoldconfig: $(conf) $(Q)$< -s $(Kconfig) oldconfig: $(conf) $(Q)$< -o $(Kconfig) allnoconfig: $(conf) $(Q)$< -n $(Kconfig) allyesconfig: $(conf) $(Q)$< -y $(Kconfig) $(SED) -i -e "s/^DODEBUG=.*/# DODEBUG is not set/" \ -e "s/^DOASSERTS=.*/# DOASSERTS is not set/" \ -e "s/^SUPPORT_LD_DEBUG_EARLY=.*/# SUPPORT_LD_DEBUG_EARLY is not set/" \ -e "s/^SUPPORT_LD_DEBUG=.*/# SUPPORT_LD_DEBUG is not set/" \ $(KCONFIG_CONFIG) $(Q)$< -o $(Kconfig) alldefconfig: $(conf) $(Q)$< -A $(Kconfig) randconfig: $(conf) $(Q)$< -r $(Kconfig) cmd_defconfig = $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ $(Kconfig) defconfig: $(conf) ; $(cmd_defconfig) %_defconfig: $(conf) ; $(cmd_defconfig) savedefconfig: $(conf) $(Q)$< -S defconfig $(Kconfig) listnewconfig: $(conf) $(Q)$< -l $(Kconfig) olddefconfig: $(conf) $(Q)$< -d $(Kconfig) menuconfig-clean-y: $(Q)$(MAKE) -C extra/config CLEAN_extra/config # The find here should continue to work as long as we are only symlinking # headers in to include/. I don't see this changing to anything else, so # it should be fine. include_clean: $(SECHO) " CLEAN include" $(Q)$(RM) -r $(top_builddir)include/bits $(Q)find $(top_builddir)include/ -type l -exec rm -f {} + clean: include_clean $(Q)$(RM) -r $(top_builddir)lib @$(MAKE) -C utils CLEAN_utils $(Q)$(RM) $(top_builddir)extra/scripts/unifdef $(Q)$(RM) -r $(LOCAL_INSTALL_PATH) distclean: realclean -find . \( -name core -o -name \*.orig -o -name \*~ -o -name .\*.dep \) -exec $(RM) {} \; $(RM) $(top_builddir).config $(top_builddir).config.old $(top_builddir).config.cmd $(Q)$(RM) $(top_builddir)extra/locale/*.tgz @$(MAKE) -C extra/config distclean dist release: $(RM) ../uClibc-$(VERSION).tar git archive --format=tar --prefix=uClibc-$(VERSION)/ HEAD \ > ../uClibc-$(VERSION).tar cat ../uClibc-$(VERSION).tar | bzip2 -c9 > ../uClibc-$(VERSION).tar.bz2 cat ../uClibc-$(VERSION).tar | xz -e -c8 > ../uClibc-$(VERSION).tar.xz du -b ../uClibc-$(VERSION).tar.{bz2,xz}