From 43014917a316b581cca09dbc32c04cbdb517ffda Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 9 Sep 2005 02:39:12 +0000 Subject: sync with glibc by moving the thread_desc stuff out of internals.h and into a new file descr.h ... also redo thread_desc init by specifying members in the struct by name rather than position --- libpthread/linuxthreads/internals.h | 253 +++++------------------------------- 1 file changed, 29 insertions(+), 224 deletions(-) (limited to 'libpthread/linuxthreads/internals.h') diff --git a/libpthread/linuxthreads/internals.h b/libpthread/linuxthreads/internals.h index 6bb80cd9e..1f60caac3 100644 --- a/libpthread/linuxthreads/internals.h +++ b/libpthread/linuxthreads/internals.h @@ -19,6 +19,7 @@ /* Includes */ +#include #include /* for _LIBC_TSD_KEY_N */ #include #include @@ -27,8 +28,10 @@ #include #include #include "pt-machine.h" +#include +#include #include "semaphore.h" -#include "../linuxthreads_db/thread_dbP.h" +#include "descr.h" #ifdef __UCLIBC_HAS_XLOCALE__ #include #endif /* __UCLIBC_HAS_XLOCALE__ */ @@ -52,30 +55,14 @@ # define THREAD_SETMEM_NC(descr, member, value) descr->member = (value) #endif -/* Arguments passed to thread creation routine */ - -struct pthread_start_args { - void * (*start_routine)(void *); /* function to run */ - void * arg; /* its argument */ - sigset_t mask; /* initial signal mask for thread */ - int schedpolicy; /* initial scheduling policy (if any) */ - struct sched_param schedparam; /* initial scheduling parameters (if any) */ -}; - - -/* We keep thread specific data in a special data structure, a two-level - array. The top-level array contains pointers to dynamically allocated - arrays of a certain number of data pointers. So we can implement a - sparse array. Each dynamic second-level array has - PTHREAD_KEY_2NDLEVEL_SIZE - entries. This value shouldn't be too large. */ -#define PTHREAD_KEY_2NDLEVEL_SIZE 32 - -/* We need to address PTHREAD_KEYS_MAX key with PTHREAD_KEY_2NDLEVEL_SIZE - keys in each subarray. */ -#define PTHREAD_KEY_1STLEVEL_SIZE \ - ((PTHREAD_KEYS_MAX + PTHREAD_KEY_2NDLEVEL_SIZE - 1) \ - / PTHREAD_KEY_2NDLEVEL_SIZE) +#if !defined NOT_IN_libc && defined FLOATING_STACKS +# define LIBC_THREAD_GETMEM(descr, member) THREAD_GETMEM (descr, member) +# define LIBC_THREAD_SETMEM(descr, member, value) \ + THREAD_SETMEM (descr, member, value) +#else +# define LIBC_THREAD_GETMEM(descr, member) descr->member +# define LIBC_THREAD_SETMEM(descr, member, value) descr->member = (value) +#endif typedef void (*destr_function)(void *); @@ -85,105 +72,9 @@ struct pthread_key_struct { }; -#define PTHREAD_START_ARGS_INITIALIZER { NULL, NULL, {{0, }}, 0, { 0 } } - -/* The type of thread descriptors */ - -typedef struct _pthread_descr_struct * pthread_descr; - -/* Callback interface for removing the thread from waiting on an - object if it is cancelled while waiting or about to wait. - This hold a pointer to the object, and a pointer to a function - which ``extricates'' the thread from its enqueued state. - The function takes two arguments: pointer to the wait object, - and a pointer to the thread. It returns 1 if an extrication - actually occured, and hence the thread must also be signalled. - It returns 0 if the thread had already been extricated. */ - -typedef struct _pthread_extricate_struct { - void *pu_object; - int (*pu_extricate_func)(void *, pthread_descr); -} pthread_extricate_if; - -/* Atomic counter made possible by compare_and_swap */ - -struct pthread_atomic { - long p_count; - int p_spinlock; -}; +#define PTHREAD_START_ARGS_INITIALIZER(fct) \ + { (void *(*) (void *)) fct, NULL, {{0, }}, 0, { 0 } } -/* Context info for read write locks. The pthread_rwlock_info structure - is information about a lock that has been read-locked by the thread - in whose list this structure appears. The pthread_rwlock_context - is embedded in the thread context and contains a pointer to the - head of the list of lock info structures, as well as a count of - read locks that are untracked, because no info structure could be - allocated for them. */ - -struct _pthread_rwlock_t; - -typedef struct _pthread_rwlock_info { - struct _pthread_rwlock_info *pr_next; - struct _pthread_rwlock_t *pr_lock; - int pr_lock_count; -} pthread_readlock_info; - -struct _pthread_descr_struct { - pthread_descr p_nextlive, p_prevlive; - /* Double chaining of active threads */ - pthread_descr p_nextwaiting; /* Next element in the queue holding the thr */ - pthread_descr p_nextlock; /* can be on a queue and waiting on a lock */ - pthread_t p_tid; /* Thread identifier */ - int p_pid; /* PID of Unix process */ - int p_priority; /* Thread priority (== 0 if not realtime) */ - struct _pthread_fastlock * p_lock; /* Spinlock for synchronized accesses */ - int p_signal; /* last signal received */ - sigjmp_buf * p_signal_jmp; /* where to siglongjmp on a signal or NULL */ - sigjmp_buf * p_cancel_jmp; /* where to siglongjmp on a cancel or NULL */ - char p_terminated; /* true if terminated e.g. by pthread_exit */ - char p_detached; /* true if detached */ - char p_exited; /* true if the assoc. process terminated */ - void * p_retval; /* placeholder for return value */ - int p_retcode; /* placeholder for return code */ - pthread_descr p_joining; /* thread joining on that thread or NULL */ - struct _pthread_cleanup_buffer * p_cleanup; /* cleanup functions */ - char p_cancelstate; /* cancellation state */ - char p_canceltype; /* cancellation type (deferred/async) */ - char p_canceled; /* cancellation request pending */ - int * p_errnop; /* pointer to used errno variable */ - int p_errno; /* error returned by last system call */ - int * p_h_errnop; /* pointer to used h_errno variable */ - int p_h_errno; /* error returned by last netdb function */ - char * p_in_sighandler; /* stack address of sighandler, or NULL */ - char p_sigwaiting; /* true if a sigwait() is in progress */ - struct pthread_start_args p_start_args; /* arguments for thread creation */ - void ** p_specific[PTHREAD_KEY_1STLEVEL_SIZE]; /* thread-specific data */ - void * p_libc_specific[_LIBC_TSD_KEY_N]; /* thread-specific data for libc */ - int p_userstack; /* nonzero if the user provided the stack */ - void *p_guardaddr; /* address of guard area or NULL */ - size_t p_guardsize; /* size of guard area */ - pthread_descr p_self; /* Pointer to this structure */ - int p_nr; /* Index of descriptor in __pthread_handles */ - int p_report_events; /* Nonzero if events must be reported. */ - td_eventbuf_t p_eventbuf; /* Data for event. */ - struct pthread_atomic p_resume_count; /* number of times restart() was - called on thread */ - char p_woken_by_cancel; /* cancellation performed wakeup */ - char p_condvar_avail; /* flag if conditional variable became avail */ - char p_sem_avail; /* flag if semaphore became available */ - pthread_extricate_if *p_extricate; /* See above */ - pthread_readlock_info *p_readlock_list; /* List of readlock info structs */ - pthread_readlock_info *p_readlock_free; /* Free list of structs */ - int p_untracked_readlock_count; /* Readlocks not tracked by list */ - /* New elements must be added at the end. */ -#ifdef __UCLIBC_HAS_XLOCALE__ - __locale_t locale; /* thread-specific locale from uselocale() only! */ -#endif /* __UCLIBC_HAS_XLOCALE__ */ -} __attribute__ ((aligned(32))); /* We need to align the structure so that - doubles are aligned properly. This is 8 - bytes on MIPS and 16 bytes on MIPS64. - 32 bytes might give better cache - utilization. */ /* The type of thread handles. */ @@ -225,6 +116,16 @@ struct pthread_request { }; + +typedef void (*arch_sighandler_t) (int, SIGCONTEXT); +union sighandler +{ + arch_sighandler_t old; + void (*rt) (int, struct siginfo *, struct ucontext *); +}; +extern union sighandler __sighandler[NSIG]; + + /* Signals used for suspend/restart and for cancellation notification. */ extern int __pthread_sig_restart; @@ -240,41 +141,10 @@ extern int __pthread_sig_debug; extern struct pthread_handle_struct __pthread_handles[PTHREAD_THREADS_MAX]; -/* Descriptor of the initial thread */ - -extern struct _pthread_descr_struct __pthread_initial_thread; - -/* Descriptor of the manager thread */ - -extern struct _pthread_descr_struct __pthread_manager_thread; - /* Descriptor of the main thread */ extern pthread_descr __pthread_main_thread; -/* Limit between the stack of the initial thread (above) and the - stacks of other threads (below). Aligned on a STACK_SIZE boundary. - Initially 0, meaning that the current thread is (by definition) - the initial thread. */ - -/* For non-MMU systems also remember to stack top of the initial thread. - * This is adapted when other stacks are malloc'ed since we don't know - * the bounds a-priori. -StS */ - -extern char *__pthread_initial_thread_bos; -#ifndef __ARCH_HAS_MMU__ -extern char *__pthread_initial_thread_tos; -#define NOMMU_INITIAL_THREAD_BOUNDS(tos,bos) if ((tos)>=__pthread_initial_thread_bos && (bos)<=__pthread_initial_thread_tos) __pthread_initial_thread_bos = (tos)+1 -#else -#define NOMMU_INITIAL_THREAD_BOUNDS(tos,bos) /* empty */ -#endif /* __ARCH_HAS_MMU__ */ - - -/* Indicate whether at least one thread has a user-defined stack (if 1), - or all threads have stacks supplied by LinuxThreads (if 0). */ - -extern int __pthread_nonstandard_stacks; - /* File descriptor for sending requests to the thread manager. Initially -1, meaning that __pthread_initialize_manager must be called. */ @@ -289,11 +159,6 @@ extern int __pthread_manager_reader; extern size_t __pthread_max_stacksize; #endif -/* Limits of the thread manager stack. */ - -extern char *__pthread_manager_thread_bos; -extern char *__pthread_manager_thread_tos; - /* Pending request for a process-wide exit */ extern int __pthread_exit_requested, __pthread_exit_code; @@ -321,6 +186,11 @@ static inline pthread_handle thread_handle(pthread_t id) /* Validate a thread handle. Must have acquired h->h_spinlock before. */ static inline int invalid_handle(pthread_handle h, pthread_t id) +{ + return h->h_descr == NULL || h->h_descr->p_tid != id || h->h_descr->p_terminated; +} + +static inline int nonexisting_handle(pthread_handle h, pthread_t id) { return h->h_descr == NULL || h->h_descr->p_tid != id; } @@ -351,17 +221,6 @@ extern size_t __pagesize; #define THREAD_MANAGER_STACK_SIZE (2 * __pagesize - 32) #endif -/* The max size of the thread stack segments. If the default - THREAD_SELF implementation is used, this must be a power of two and - a multiple of PAGE_SIZE. */ -#ifndef STACK_SIZE -#ifdef __ARCH_HAS_MMU__ -#define STACK_SIZE (2 * 1024 * 1024) -#else -#define STACK_SIZE (4 * __pagesize) -#endif -#endif - /* The base of the "array" of thread stacks. The array will grow down from here. Defaults to the calculated bottom of the initial application stack. */ @@ -369,12 +228,6 @@ extern size_t __pagesize; #define THREAD_STACK_START_ADDRESS __pthread_initial_thread_bos #endif -/* Get some notion of the current stack. Need not be exactly the top - of the stack, just something somewhere in the current frame. */ -#ifndef CURRENT_STACK_FRAME -#define CURRENT_STACK_FRAME ({ char __csf; &__csf; }) -#endif - /* If MEMORY_BARRIER isn't defined in pt-machine.h, assume the architecture doesn't need a memory barrier instruction (e.g. Intel x86). Still we need the compiler to respect the barrier and emit @@ -415,54 +268,6 @@ extern size_t __pagesize; #define SPIN_SLEEP_DURATION 2000001 #endif -/* Recover thread descriptor for the current thread */ - -extern pthread_descr __pthread_find_self (void) __attribute__ ((const)); - -static inline pthread_descr thread_self (void) __attribute__ ((const)); -static inline pthread_descr thread_self (void) -{ -#ifdef THREAD_SELF - return THREAD_SELF; -#else - char *sp = CURRENT_STACK_FRAME; -#ifdef __ARCH_HAS_MMU__ - if (sp >= __pthread_initial_thread_bos) - return &__pthread_initial_thread; - else if (sp >= __pthread_manager_thread_bos - && sp < __pthread_manager_thread_tos) - return &__pthread_manager_thread; - else if (__pthread_nonstandard_stacks) - return __pthread_find_self(); - else - return (pthread_descr)(((unsigned long)sp | (STACK_SIZE-1))+1) - 1; -#else - /* For non-MMU we need to be more careful about the initial thread stack. - * We refine the initial thread stack bounds dynamically as we allocate - * the other stack frame such that it doesn't overlap with them. Then - * we can be sure to pick the right thread according to the current SP */ - - /* Since we allow other stack frames to be above or below, we need to - * treat this case special. When pthread_initialize() wasn't called yet, - * only the initial thread is there. */ - if (__pthread_initial_thread_bos == NULL) { - return &__pthread_initial_thread; - } - else if (sp >= __pthread_initial_thread_bos - && sp < __pthread_initial_thread_tos) { - return &__pthread_initial_thread; - } - else if (sp >= __pthread_manager_thread_bos - && sp < __pthread_manager_thread_tos) { - return &__pthread_manager_thread; - } - else { - return __pthread_find_self(); - } -#endif /* __ARCH_HAS_MMU__ */ -#endif -} - /* Debugging */ #ifdef DEBUG -- cgit v1.2.3