From e286a674419d31cb0757dd2f8307d8b4756cf1f9 Mon Sep 17 00:00:00 2001 From: Bernhard Reutner-Fischer Date: Sun, 3 Nov 2013 23:27:46 +0100 Subject: pull kconfig from linux-3.11 Signed-off-by: Bernhard Reutner-Fischer --- extra/config/Makefile.kconfig | 289 +++++++++++++++++++++++------------------- 1 file changed, 161 insertions(+), 128 deletions(-) (limited to 'extra/config/Makefile.kconfig') diff --git a/extra/config/Makefile.kconfig b/extra/config/Makefile.kconfig index 83c20c474..844bc9da0 100644 --- a/extra/config/Makefile.kconfig +++ b/extra/config/Makefile.kconfig @@ -2,14 +2,18 @@ # Kernel configuration targets # These targets are used from top-level makefile -PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config +PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ + localmodconfig localyesconfig ifdef KBUILD_KCONFIG Kconfig := $(KBUILD_KCONFIG) else -Kconfig := arch/$(SRCARCH)/Kconfig +Kconfig := Kconfig endif +# We need this, in case the user has it in its environment +unexport CONFIG_ + xconfig: $(obj)/qconf $< $(Kconfig) @@ -20,91 +24,121 @@ menuconfig: $(obj)/mconf $< $(Kconfig) config: $(obj)/conf + $< --oldaskconfig $(Kconfig) + +nconfig: $(obj)/nconf $< $(Kconfig) oldconfig: $(obj)/conf - $< -o $(Kconfig) + $< --$@ $(Kconfig) silentoldconfig: $(obj)/conf - $< -s $(Kconfig) + $(Q)mkdir -p include/generated + $< --$@ $(Kconfig) + +localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf + $(Q)mkdir -p include/generated + $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config + $(Q)if [ -f .config ]; then \ + cmp -s .tmp.config .config || \ + (mv -f .config .config.old.1; \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + mv -f .config.old.1 .config.old) \ + else \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + fi + $(Q)rm -f .tmp.config # Create new linux.pot file # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files -# The symlink is used to repair a deficiency in arch/um update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h - $(Q)echo " GEN config" - $(Q)xgettext --default-domain=linux \ - --add-comments --keyword=_ --keyword=N_ \ - --from-code=UTF-8 \ - --files-from=scripts/kconfig/POTFILES.in \ + $(Q)echo " GEN config.pot" + $(Q)xgettext --default-domain=linux \ + --add-comments --keyword=_ --keyword=N_ \ + --from-code=UTF-8 \ + --files-from=$(srctree)/scripts/kconfig/POTFILES.in \ + --directory=$(srctree) --directory=$(objtree) \ --output $(obj)/config.pot $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot - $(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch - $(Q)(for i in `ls arch/*/Kconfig`; \ + $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \ + $(srctree)/arch/*/um/Kconfig`; \ do \ - echo " GEN $$i"; \ + echo " GEN $$i"; \ $(obj)/kxgettext $$i \ >> $(obj)/config.pot; \ done ) + $(Q)echo " GEN linux.pot" $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ --output $(obj)/linux.pot - $(Q)rm -f arch/um/Kconfig.arch $(Q)rm -f $(obj)/config.pot -PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig +PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig + +allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf + $< --$@ $(Kconfig) -randconfig: $(obj)/conf - $< -r $(Kconfig) +PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig -allyesconfig: $(obj)/conf - $< -y $(Kconfig) +listnewconfig olddefconfig: $(obj)/conf + $< --$@ $(Kconfig) -allnoconfig: $(obj)/conf - $< -n $(Kconfig) +# oldnoconfig is an alias of olddefconfig, because people already are dependent +# on its behavior(sets new symbols to their default value but not 'n') with the +# counter-intuitive name. +oldnoconfig: $(obj)/conf + $< --olddefconfig $(Kconfig) -allmodconfig: $(obj)/conf - $< -m $(Kconfig) +savedefconfig: $(obj)/conf + $< --$@=defconfig $(Kconfig) defconfig: $(obj)/conf ifeq ($(KBUILD_DEFCONFIG),) - $< -d $(Kconfig) + $< --defconfig $(Kconfig) else @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" - $(Q)$< -D arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) + $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) endif %_defconfig: $(obj)/conf - $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig) + $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) # Help text used by make help help: @echo ' config - Update current config utilising a line-oriented program' + @echo ' nconfig - Update current config utilising a ncurses menu based program' @echo ' menuconfig - Update current config utilising a menu based program' @echo ' xconfig - Update current config utilising a QT based front-end' @echo ' gconfig - Update current config utilising a GTK based front-end' @echo ' oldconfig - Update current config utilising a provided .config as base' - @echo ' silentoldconfig - Same as oldconfig, but quietly' - @echo ' randconfig - New config with random answer to all options' - @echo ' defconfig - New config with default answer to all options' - @echo ' allmodconfig - New config selecting modules when possible' - @echo ' allyesconfig - New config where all options are accepted with yes' + @echo ' localmodconfig - Update current config disabling modules not loaded' + @echo ' localyesconfig - Update current config converting local mods to core' + @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps' + @echo ' defconfig - New config with default from ARCH supplied defconfig' + @echo ' savedefconfig - Save current config as ./defconfig (minimal config)' @echo ' allnoconfig - New config where all options are answered with no' + @echo ' allyesconfig - New config where all options are accepted with yes' + @echo ' allmodconfig - New config selecting modules when possible' + @echo ' alldefconfig - New config with all symbols set to default' + @echo ' randconfig - New config with random answer to all options' + @echo ' listnewconfig - List new options' + @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' # lxdialog stuff check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh # Use recursively expanded variables so we do not call gcc unless # we really need to do so. (Do not call gcc as part of make mrproper) -HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) -HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) - -HOST_EXTRACFLAGS += -DLOCALE - +HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ + -DLOCALE # =========================================================================== # Shared Makefile for the various kconfig executables: # conf: Used for defconfig, oldconfig and related targets -# mconf: Used for the mconfig target. +# nconf: Used for the nconfig target. +# Utilizes ncurses +# mconf: Used for the menuconfig target # Utilizes the lxdialog package # qconf: Used for the xconfig target # Based on QT which needs to be installed to compile it @@ -116,15 +150,27 @@ lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o conf-objs := conf.o zconf.tab.o -mconf-objs := mconf.o zconf.tab.o $(lxdialog) +mconf-objs := mconf.o zconf.tab.o $(lxdialog) +nconf-objs := nconf.o zconf.tab.o nconf.gui.o kxgettext-objs := kxgettext.o zconf.tab.o +qconf-cxxobjs := qconf.o +qconf-objs := zconf.tab.o +gconf-objs := gconf.o zconf.tab.o + +hostprogs-y := conf -hostprogs-y := conf qconf gconf kxgettext +ifeq ($(MAKECMDGOALS),nconfig) + hostprogs-y += nconf +endif ifeq ($(MAKECMDGOALS),menuconfig) hostprogs-y += mconf endif +ifeq ($(MAKECMDGOALS),update-po-config) + hostprogs-y += kxgettext +endif + ifeq ($(MAKECMDGOALS),xconfig) qconf-target := 1 endif @@ -134,24 +180,23 @@ endif ifeq ($(qconf-target),1) -qconf-cxxobjs := qconf.o -qconf-objs := kconfig_load.o zconf.tab.o + hostprogs-y += qconf endif ifeq ($(gconf-target),1) -gconf-objs := gconf.o kconfig_load.o zconf.tab.o + hostprogs-y += gconf endif -clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \ - .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf +clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck +clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h +clean-files += mconf qconf gconf nconf clean-files += config.pot linux.pot # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) PHONY += $(obj)/dochecklxdialog $(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog -#$(obj)/dochecklxdialog: -# $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES) +$(obj)/dochecklxdialog: + $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) always := dochecklxdialog @@ -159,16 +204,24 @@ always := dochecklxdialog HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS)) # generated files seem to need this to find local include files -HOSTCFLAGS_lex.zconf.o := -I$(src) +HOSTCFLAGS_zconf.lex.o := -I$(src) HOSTCFLAGS_zconf.tab.o := -I$(src) -HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl -HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK +LEX_PREFIX_zconf := zconf +YACC_PREFIX_zconf := zconf + +HOSTLOADLIBES_qconf = $(KC_QT_LIBS) +HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ - -D LKC_DIRECT_LINK + -Wno-missing-prototypes +HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) + +HOSTLOADLIBES_nconf = $(shell \ + pkg-config --libs menu panel ncurses 2>/dev/null \ + || echo "-lmenu -lpanel -lncurses" ) $(obj)/qconf.o: $(obj)/.tmp_qtcheck ifeq ($(qconf-target),1) @@ -178,40 +231,48 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile # QT needs some extra effort... $(obj)/.tmp_qtcheck: @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ + if ! pkg-config --exists QtCore 2> /dev/null; then \ + echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ + pkg-config --exists qt 2> /dev/null && pkg=qt; \ + pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ + if [ -n "$$pkg" ]; then \ + cflags="\$$(shell pkg-config $$pkg --cflags)"; \ + libs="\$$(shell pkg-config $$pkg --libs)"; \ + moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ + dir="$$(pkg-config $$pkg --variable=prefix)"; \ + else \ + for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ + if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ + done; \ + if [ -z "$$dir" ]; then \ + echo >&2 "*"; \ + echo >&2 "* Unable to find any QT installation. Please make sure that"; \ + echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \ + echo >&2 "* either qmake can be found or install pkg-config or set"; \ + echo >&2 "* the QTDIR environment variable to the correct location."; \ + echo >&2 "*"; \ + false; \ + fi; \ + libpath=$$dir/lib; lib=qt; osdir=""; \ + $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ + osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ + test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ + test -f $$libpath/libqt-mt.so && lib=qt-mt; \ + cflags="-I$$dir/include"; \ + libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ + moc="$$dir/bin/moc"; \ + fi; \ + if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ + echo "*"; \ + echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ + echo "*"; \ + moc="/usr/bin/moc"; \ + fi; \ else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo "*"; \ - echo "* Unable to find the QT3 installation. Please make sure that"; \ - echo "* the QT3 development package is correctly installed and"; \ - echo "* either install pkg-config or set the QTDIR environment"; \ - echo "* variable to the correct location."; \ - echo "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ + cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ + libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ + moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \ + [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ @@ -229,61 +290,33 @@ $(obj)/.tmp_gtkcheck: if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \ touch $@; \ else \ - echo "*"; \ - echo "* GTK+ is present but version >= 2.0.0 is required."; \ - echo "*"; \ + echo >&2 "*"; \ + echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \ + echo >&2 "*"; \ false; \ fi \ else \ - echo "*"; \ - echo "* Unable to find the GTK+ installation. Please make sure that"; \ - echo "* the GTK+ 2.0 development package is correctly installed..."; \ - echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \ - echo "*"; \ + echo >&2 "*"; \ + echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \ + echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \ + echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \ + echo >&2 "*"; \ false; \ fi endif -$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c - -$(obj)/kconfig_load.o: $(obj)/lkc_defs.h - -$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h +$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c -$(obj)/gconf.o: $(obj)/lkc_defs.h +$(obj)/qconf.o: $(obj)/qconf.moc -$(obj)/%.moc: $(src)/%.h - $(KC_QT_MOC) -i $< -o $@ +quiet_cmd_moc = MOC $@ + cmd_moc = $(KC_QT_MOC) -i $< -o $@ -$(obj)/lkc_defs.h: $(src)/lkc_proto.h - sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/' +$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck + $(call cmd,moc) # Extract gconf menu items for I18N support $(obj)/gconf.glade.h: $(obj)/gconf.glade - intltool-extract --type=gettext/glade $(obj)/gconf.glade + $(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \ + $(obj)/gconf.glade -### -# The following requires flex/bison/gperf -# By default we use the _shipped versions, uncomment the following line if -# you are modifying the flex/bison src. -# LKC_GENPARSER := 1 - -ifdef LKC_GENPARSER - -$(obj)/zconf.tab.c: $(src)/zconf.y -$(obj)/lex.zconf.c: $(src)/zconf.l -$(obj)/zconf.hash.c: $(src)/zconf.gperf - -%.tab.c: %.y - bison -l -b $* -p $(notdir $*) $< - cp $@ $@_shipped - -lex.%.c: %.l - flex -L -P$(notdir $*) -o$@ $< - cp $@ $@_shipped - -%.hash.c: %.gperf - gperf < $< > $@ - cp $@ $@_shipped - -endif -- cgit v1.2.3