Age | Commit message (Collapse) | Author |
|
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
We use semicolons in the place of
`DL_RELOCATE_RELR()` and `DL_DO_RELOCATE_RELR()` 'calling'
so the semicolon in the macro definition leads to
semicolon duplication after preprocessing.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
While they are not a problem per-se they cause issues with some tooling
(such as clang coverage) and are confusing to the reader.
|
|
There is a check for (*rpnt == NULL) a few lines above but the "else"
case performing an allocation does only exist if SHARED is not defined.
If SHARED is defined, the allocation is not performed and it may happen
(at least in theory) that *rpnt == NULL when executing
(*rpnt)->dyn = tpnt;
Add the null-pointer check.
Signed-off-by: Frank Mehnert <frank.mehnert@kernkonzept.com>
|
|
|
|
Here is the warning:
ldso/ldso/dl-elf.c: In function '_dl_fixup':
./ldso/include/dl-elf.h:259:37: warning: declaration of 'reloc_addr' shadows a previous local [-Wshadow]
259 | ElfW(Addr) *reloc_addr = 0; \
| ^~~~~~~~~~
./ldso/include/dl-elf.h:290:33: note: in expansion of macro 'DL_DO_RELOCATE_RELR'
290 | DL_DO_RELOCATE_RELR(dyn->loadaddr, relr_start, relr_end); \
| ^~~~~~~~~~~~~~~~~~~
ldso/ldso/dl-elf.c:1032:9: note: in expansion of macro 'DL_RELOCATE_RELR'
1032 | DL_RELOCATE_RELR(tpnt);
| ^~~~~~~~~~~~~~~~
In file included from ldso/ldso/ldso.c:1462:
ldso/ldso/dl-elf.c:1012:20: note: shadowed declaration is here
1012 | ElfW(Addr) reloc_addr
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
Nowadays modern libcs like Glibc and musl currently
support processing of RELATIVE relocations compressed
with DT_RELR format. However I have noticed that uClibc-ng
doesn't support this feature and if the source will be linked with
`-Wl,-z,pack-relative-relos` (bfd) or `-Wl,--pack-dyn-relocs=relr`
(lld) then ld.so cannot properly load the produced DSO.
This patch is intended to fix this issue and adds applying
of DT_RELR relative relocation.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
|
|
The Linux kernels ELF-FDPIC binfmt program loader can support loading and
running conventional ELF format binaries on noMMU kernels when compiled
appropriately. That is when they are constant displacement binaries such
as generated using the -pie compile option.
Add a configure option to allow selecting ELF binary support in noMMU
mode configurations on architectures that support this. The main
requirement is to generate the ldso run-time loader to perform relocation
at load time. These configurations do not support shared libraries, so
there is no need to generate a full shared library, only the static
version is required.
The use of ELF format binaries does mean a slightly simpler toolchain
generation (does not require a -uclinux- for some architectures) and does
not require an extra tool like elf2flt.
This initial support targets M68K, ARM and RISC-V architectures. No kernel
changes are required, the required support for this is already in mainline
kernels (certainly as of linux-6.6).
Note that for the M68K and ARM architectures that the initialized
registers and stack layout at process startup is slightly different for
the flat format loader and the ELF/ELF-FDPIC loaders. So we need some
changes to the startup code (crt1.S) for them.
I have not done extensive testing outside of M68K, ARM and RISC-V.
I had to make changes to a couple of the dl-startup.h architecture files
to get them to build for this noMMU case. I did not dig down too deep on
the reasons, but they still seem ok for the MMU case as well.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
Fixes segfaults in curl with gnutls encryption.
|
|
|
|
|
|
|
|
|
|
New ARCv3 ISA includes both 64-bit and 32-bit CPU family.
This patch adds support for 32-bit ARCv3 HS5x processors.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Add a header file with assembler macros to be able to handle in one
place the differences between ARCv2 and ARCv3 ISAs. It is a preparatory
step before the introduction of support for ARCv3 CPUs.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Option '-mno-long-calls' is not supported by all arc gcc compilers.
For instance, this option is not supported by GCC for ARCv3 processors.
Check if this option is supported before applying it.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Xtensa does not define PERFORM_BOOTSTRAP_RELOC so it doesn't need
ARCH_NEEDS_BOOTSTRAP_RELOCS definition. Remove it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Xtensa PERFORM_BOOTSTRAP_GOT macro uses mprotect to make bits of GOT
writable, but noMMU linux kernel returns ENOSYS to mprotect syscalls,
and syscall wrapper tries to update errno with the error code. This
happens well before the relocations are done and results in writes to
unrelated locations, memory corruption or protection violations.
Only define PERFORM_BOOTSTRAP_GOT when building xtensa configuration
with MMU support.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
3 architectures currently define PERFORM_BOOTSTRAP_GOT: avr32, mips and
xtensa. A block of code that applies relative relocations in the
DL_START is disabled when PERFORM_BOOTSTRAP_GOT is defined, unless it's
avr32 or mips, effectively disabling it only for xtensa.
This may be simplified by removing the call to elf_machine_relative from
the xtensa PERFORM_BOOTSTRAP_GOT and always using common code.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
on mips
Updated config to allow compilation of rcrt1.o for mips and modified it's crt1.S to perform relocates in __start.
The mips architecture performs relocations differently then most other architectures. reloc_static_pie was rewritten, taking code from dl-startup.c, in order to perfrom the additional relocations. Modifications were made to mips' dl-startup.h to allow for the use of contained macros without including _start definition.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
When searching for shared libraries, it could happen that redudant '/'
were added to the pathname with would later be reported via dladdr() in
the dli_fname member.
Signed-off-by: Daniel Dorau <d.dorau@avm.de>
|
|
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
default
This patch fixes segfault of all user space processes (including init, which caused a panic) on recent buildroot powerpc32 builds.
The issue has been reported by Romain Naour in this thread: https://mailman.uclibc-ng.org/pipermail/devel/2021-May/002068.html
Recent buildroot toolchain enables secure PLT in powerpc gcc.
The latter will then supply -msecure-plt to gas invocations by default.
Recent buildroot also enables PIE by defaults.
For the secure PLT to work in PIC, the r30 register needs to point to the GOT.
Old "bss plt" was just a one-instruction-wide PLT slot, pointed-to by a R_PPC_JMP_SLOT relocation, which was written on-the-fly to contain a branch instruction to the correct address. It therefore had to stay writable.
New secure PLT only contains read-only code which loads the branch address from the writable GOT.
Note: secure PLT without PIC does not need r30 to be set. Because offset between plt stub code and got is known at link-time. In this case the PLT entry looks like:
1009b3e0 <__uClibc_main@plt>:
1009b3e0: 3d 60 10 0e lis r11,4110
1009b3e4: 81 6b 03 74 lwz r11,884(r11)
1009b3e8: 7d 69 03 a6 mtctr r11
1009b3ec: 4e 80 04 20 bctr
Whereas secure PLT with PIC - offset between plt and got is unknown at link-time - looks like this:
000af800 <00000000.plt_pic32.__uClibc_main>:
af800: 81 7e 03 80 lwz r11,896(r30)
af804: 7d 69 03 a6 mtctr r11
af808: 4e 80 04 20 bctr
af80c: 60 00 00 00 nop
Signed-off-by: Yann Sionneau <yann@sionneau.net>
|
|
|
|
This commit adds support for Kalray VLIW family (kvx)
Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the
third of the KV family has the following features:
32/64 bits execution mode
6-issue VLIW architecture
64 x 64bits general purpose registers
SIMD instructions
little-endian
In order to build a usable toolchain, build scripts are provided at the
following address: https://github.com/kalray/build-scripts.
Kalray uses FOSS which is available at https://github.com/kalray
This includes Linux kernel, uClibc-ng, gcc, binutils, etc.
Signed-off-by: Clément Léger <cleger@kalray.eu>
Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu>
Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu>
Signed-off-by: Marius Gligor <mgligor@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
SEND_STDERR_DEBUG does nothing if __SUPPORT_LD_DEBUG_EARLY__ is not defined
thus causing a warning.
Fixes this:
In file included from ldso/ldso/ldso.c:86:0:
ldso/ldso/dl-startup.c: In function '_dl_start':
ldso/ldso/dl-startup.c:313:13: warning: variable 'strtab' set but not used [-Wunused-but-set-variable]
char *strtab;
^~~~~~
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Fixes the following compilation warning for 64-bit arch with TLS support:
CC ldso/libdl/libdl.oS
ldso/libdl/libdl.c: In function 'do_dlsym':
ldso/libdl/libdl.c:739:59: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
ret = _dl_tls_symaddr ((struct link_map *)sym_ref.tpnt, (Elf32_Addr)ret);
^
|
|
|
|
Before this commit tst-tls-at-ctor test would segfault.
After it passes.
testsuite run before: https://pastebin.com/504JgQXa
testsuite run after: https://pastebin.com/d2aNciVt
Stafford Horne already fixed it in glibc:
* https://github.com/openrisc/or1k-glibc/blob/bcd87396ebe78228645c0731b06c934dfd88855a/sysdeps/or1k/dl-machine.h#L298
* https://github.com/openrisc/or1k-glibc/blob/bcd87396ebe78228645c0731b06c934dfd88855a/sysdeps/or1k/dl-machine.h#L99
|
|
Similar to glibc commit
https://sourceware.org/git/?p=glibc.git;a=commit;h=6bbfc5c09fc5b5e3d4a0cddbbd4e2e457767dae7
we need to handle Linux kernel change, which removed stat64 family from default syscall set.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
|
|
basically from or1k port of uClibc-ng, with fixes for structures in
pthreadtypes.h from 64 bit architectures.
18 testsuite failures counted.
|
|
|
|
|
|
|
|
Support EM_CSKY 252 elf format.
Changelog:
Increase EM_NUM to 253
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <han_mao@c-sky.com>
|
|
* ldso/ldso/arm/aeabi_read_tp.S: Add Thumb version.
* ldso/ldso/arm/dl-startup.h: Do not force ARM encoding, adjust
for Thumb.
* ldso/ldso/arm/resolve.S: Force Thumb encoding on Thumb-only
processors.
* libc/sysdeps/linux/arm/crt1.S: Do not force ARM encoding, adjust
for Thumb.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
[1] fixes clash of TLS variables on ARC and since LD now calculates relocations
a bit different now we need to update dynamic loader as well otherwise relocs
will be calculated improperly.
Note this is an ABI change and should go in-line with corresponding ARC tools.
That said either arc-2018.09 (to be released in few weeks) or the next version of upstream
Binutils (2.32) are required for normal TLS work on ARC.
Testcase:
----------------------------------8<-------------------------------
#include <stdio.h>
int foo3(void);
int foo1(void);
#ifdef _SHARED
int foo1(){
static __thread int val3=1;
val3 += 2;
return val3;
}
#elif _SHARED2
int foo3(){
static __thread int val2=0;
val2 += 2;
return val2;
}
#else
int main(){
printf("foo1 = %d \n", foo1());
printf("foo3 = %d \n", foo3());
return 0;
}
#endif
--------------------------------->8---------------------------------------
The result shoud be:
----8<----
foo1 = 3
foo3 = 2
---->8----
Commands to build artefacts:
----------------------------------------8<-------------------------------
arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \
-fPIC -o testtls.o -D_SHARED -c tst.c
arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \
-fPIC -o testtls2.o -D_SHARED2 -c tst.c
arc-linux-gcc -shared -o libtesttls.so testtls.o testtls2.o -lm -Os
arc-linux-gcc tst.c -o tst.out -L./ -ltesttls -Os -fPIE
--------------------------------->8---------------------------------------
Add path to libtesttls.so file to LD_LIBRARY_PATH before runnig
tst.out application.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=714e9a954a2e4123dcb26bb8da850e1344de4f5f
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Cupertino Miranda <cmiranda@synopsys.com>
CC: Vineet Gupta <vgupta@synopsys.com>
CC: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
R_ARM_NONE contains no data, so avoid dereferencing it.
* ldso/ldso/arm/elfinterp.c (_dl_do_reloc): Handle R_ARM_NONE
relocation
(_dl_do_reloc_lazy): Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
dlclose can crash or stuck the system:
When calling dlclose() then system can crash or freeze, because
htab_delete() in ldso/ldso/fdpic/dl-inlines.h uses size_t for i which
is a typedef to unsigned int. We exit the loop on negative value of i
which can never occur since i is an unsigned int. This leads to random
free of various pointers that kill the system.
* ldso/include/inline-hashtab.h (htab_delete): Change type of 'i' to int.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Make _dl_initial_error_catch_tsd hidden, such that we do not need a
FUNCDESC relocation when initializing _dl_error_catch_tsd.
* ldso/ldso/dl-tls.c (_dl_initial_error_catch_tsd): Declare hidden.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
rtld must call _dl_find_hash() with ELF_RTYPE_CLASS_DLSYM since we
want a function descriptor.
* ldso/ldso/ldso.c (_dl_get_ready_to_run): Support __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Otherwise we have link errors because of unresolved refs in libgcc.a:
ld: /lib/gcc/arm-none-uclinuxfdpiceabi/9.0.0/libgcc.a(pr-support.o): in function `_Unwind_GetDataRelBase':
/libgcc/config/arm/pr-support.c:378: undefined reference to `abort'
ld: /lib/gcc/arm-none-uclinuxfdpiceabi/9.0.0/libgcc.a(unwind-arm.o): in function `unwind_phase2_forced':
/libgcc/unwind-arm-common.inc:511: undefined reference to `memcpy'
* ldso/ldso/Makefile.in (CFLAGS-rtld): Always use
-fno-unwind-tables -fno-asynchronous-unwind-tables on arm
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Add support for R_ARM_FUNCDESC_VALUE and implement _dl_linux_resolver
for FDPIC on ARM.
* ldso/ldso/arm/elfinterp.c (_dl_linux_resolver): Support __FDPIC__.
(_dl_do_lazy_reloc): Likewise.
* ldso/ldso/arm/resolve.S (_dl_linux_resolve): Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
* ldso/ldso/dl-elf.c (_dl_load_elf_shared_library): Fix
l_tls_initimage computation.
* ldso/ldso/ldso.c (_dl_get_ready_to_run): Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
In ARM_EABI mode, the pread64 syscall parameters are aligned on
64-bits. This syscall is used in rtld when processing FDPIC
relocations.
* ldso/include/dl-syscall.h (__syscall_pread): Fix definition.
(__dl_pread): Fix syscall invocation.
* ldso/ldso/fdpic/dl-sysdep.h (__DL_PREAD): Handle __NR_pread64.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Implement _start: compute parameters for __self_reloc, and give
control to the user program.
* ldso/ldso/arm/dl-startup.h: Implement _start for __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
* ldso/ldso/ldso.c (_start): Fix definition for __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Add FDPIC dynamic relocations support, similar to what other FDPIC
targets do.
Lazy binding is implemented in a folllow-up patch.
Disable the SEND* macros because they involve relocations to
access constant strings that are unsupported by the existing
arm version.
Define DL_START, START, ARCH_NEEDS_BOOTSTRAP_RELOCS,
DL_CHECK_LIB_TYPE similarly to what other FDPIC targets do.
Define raise() because _dl_find_hash references __aeabi_uidivmod,
which uses __aeabi_idiv0 which in turn references raise.
* include/elf.h (R_ARM_FUNCDESC): Define.
(R_ARM_FUNCDESC_VALUE): Define.
* ldso/include/dl-string.h (SEND_STDERR, SEND_ADDRESS_STDERR)
(SEND_NUMBER_STDERR): Define empty for __FDPIC__.
* ldso/ldso/arm/dl-inlines.h: New file.
* ldso/ldso/arm/dl-startup.h (PERFORM_BOOTSTRAP_RELOC): Fix type
of load_addr. Fix handling of R_ARM_RELATIVE, add support for
R_ARM_FUNCDESC_VALUE.
(DL_START, START): Define for __FDPIC__.
(raise): Define.
* ldso/ldso/arm/dl-sysdep.h (ARCH_NEEDS_BOOTSTRAP_RELOCS): Define.
(DL_CHECK_LIB_TYPE): Define.
(elf_machine_type_class): Take into account FDPIC related
relocations.
(elf_machine_load_address): Support __FDPIC__.
(elf_machine_relative): Likewise.
* ldso/ldso/arm/elfinterp.c (_dl_linux_resolver): Dummy support
for __FDPIC__, implemented in a later patch.
(_dl_do_reloc): Fix reloc_adr computation for __FDPIC__, fix
handling of local symbols. Fix handling of R_ARM_RELATIVE, add
support for R_ARM_FUNCDESC_VALUE, R_ARM_FUNCDESC.
* ldso/ldso/arm/resolve.S: Make _dl_linux_resolve hidden.
* ldso/ldso/fdpic/dl-inlines.h (htab_delete): Declare.
* libc/sysdeps/linux/arm/bits/elf-fdpic.h: New file, similar to bfin's.
* libc/sysdeps/linux/arm/crtreloc.c: Likewise.
* libc/sysdeps/linux/arm/find_exidx.c (__dl_addr_in_loadaddr) Define.
(find_exidx_callback): Support __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|