Major rework of the include files to eliminate redundancy

and to better support each arch.  This is a really big patch...
 -Erik

1 files changed, 91 insertions, 0 deletions

diff --git a/libc/sysdeps/linux/i386/sys/debugreg.h b/libc/sysdeps/linux/i386/sys/debugreg.h
new file mode 100644
index 000000000..c99c94359
--- /dev/null
+++ b/libc/sysdeps/linux/i386/sys/debugreg.h
@@ -0,0 +1,91 @@
+/* Copyright (C) 1998, 2000 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
+
+#ifndef _SYS_DEBUGREG_H
+#define _SYS_DEBUGREG_H	1
+
+/* Indicate the register numbers for a number of the specific
+   debug registers.  Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0        /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3         /* u_debugreg[DR_LASTADDR]  */
+
+#define DR_STATUS 6           /* u_debugreg[DR_STATUS]     */
+#define DR_CONTROL 7          /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register.  We can use this to determine
+   which debugging register was responsible for the trap.  The other bits
+   are either reserved or not of interest to us. */
+
+#define DR_TRAP0	(0x1)		/* db0 */
+#define DR_TRAP1	(0x2)		/* db1 */
+#define DR_TRAP2	(0x4)		/* db2 */
+#define DR_TRAP3	(0x8)		/* db3 */
+
+#define DR_STEP		(0x4000)	/* single-step */
+#define DR_SWITCH	(0x8000)	/* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+   The top two bytes of the control register consist of 4 fields of 4
+   bits - each field corresponds to one of the four debug registers,
+   and indicates what types of access we trap on, and how large the data
+   field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16   /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE  4    /* 4 control bits per register */
+
+#define DR_RW_EXECUTE	(0x0) /* Settings for the access types to trap on */
+#define DR_RW_WRITE	(0x1)
+#define DR_RW_READ	(0x3)
+
+#define DR_LEN_1 (0x0)	      /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+
+/* The low byte to the control register determine which registers are
+   enabled.  There are 4 fields of two bits.  One bit is "local", meaning
+   that the processor will reset the bit after a task switch and the other
+   is global meaning that we have to explicitly reset the bit.  With linux,
+   you can use either one, since we explicitly zero the register when we enter
+   kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT  0   /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_ENABLE_SIZE	       2   /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK  (0x55) /* Set  local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+
+    On the i386, you should set the DR_LOCAL_SLOWDOWN or
+    DR_GLOBAL_SLOWDOWN bits if you want to know exactly which
+    instruction triggered the watchpoint.  Setting these bits causes
+    the processor to run more slowly, but leaving them clear makes it
+    treat watchpoint hits as imprecise exceptions, so you can't
+    reliably determine which instruction caused the hit.
+
+    The i486 and all later IA-32 processors ignore DR_LOCAL_SLOWDOWN
+    and DR_GLOBAL_SLOWDOWN.  They always report the exception
+    precisely, except in some rare cases, which the user can't do
+    anything about.  */
+
+#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
+#define DR_LOCAL_SLOWDOWN   (0x100)  /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN  (0x200)  /* Global slow the pipeline */
+
+#endif	/* sys/debugreg.h */