menu "Filesystems support"
config ADK_KERNEL_MISC_FILESYSTEMS
boolean
config ADK_KERNEL_FSNOTIFY
boolean
default y
config ADK_KERNEL_EXPORTFS
boolean
default y
config ADK_KERNEL_YAFFS_YAFFS1
boolean
config ADK_KERNEL_YAFFS_YAFFS2
boolean
config ADK_KERNEL_YAFFS_AUTO_YAFFS2
boolean
config ADK_KERNEL_DNOTIFY
boolean
config ADK_KERNEL_EXT3_FS_XATTR
boolean
config ADK_KERNEL_FAT_DEFAULT_CODEPAGE
int
default 850
config ADK_KERNEL_FAT_DEFAULT_IOCHARSET
string
default "iso8859-1"
config ADK_KERNEL_SQUASHFS_XZ
boolean
default n
config ADK_KERNEL_JFFS2_COMPRESSION_OPTIONS
boolean
default n
config ADK_KERNEL_JFFS2_ZLIB
boolean
default n
menu "Filesystems"
config ADK_KERNEL_EXT2_FS
prompt "EXT2 filesystem support"
tristate
default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
default n
help
Ext2 is a standard Linux file system for hard disks.
config ADK_KERNEL_FS_MBCACHE
tristate
default n
config ADK_KERNEL_EXT3_FS
prompt "EXT3 filesystem support"
tristate
select ADK_KERNEL_FS_MBCACHE
default n
help
This is the journalling version of the Second extended file system
(often called ext3), the de facto standard Linux file system
(method to organize files on a storage device) for hard disks.
The journalling code included in this driver means you do not have
to run e2fsck (file system checker) on your file systems after a
crash. The journal keeps track of any changes that were being made
at the time the system crashed, and can ensure that your file system
is consistent without the need for a lengthy check.
Other than adding the journal to the file system, the on-disk format
of ext3 is identical to ext2. It is possible to freely switch
between using the ext3 driver and the ext2 driver, as long as the
file system has been cleanly unmounted, or e2fsck is run on the file
system.
To add a journal on an existing ext2 file system or change the
behavior of ext3 file systems, you can use the tune2fs utility ("man
tune2fs"). To modify attributes of files and directories on ext3
file systems, use chattr ("man chattr"). You need to be using
e2fsprogs version 1.20 or later in order to create ext3 journals
(available at ).
config ADK_KERNEL_EXT4_FS
prompt "EXT4 filesystem support"
tristate
select ADK_KERNEL_FS_MBCACHE
select ADK_KERNEL_CRC16
default n
help
Ext4 filesystem.
config ADK_KERNEL_HFSPLUS_FS
prompt "HFS+ filesystem support"
tristate
select ADK_KERNEL_NLS_UTF8
select ADK_KERNEL_MISC_FILESYSTEMS
default n
help
If you say Y here, you will be able to mount extended format
Macintosh-formatted hard drive partitions with full read-write access.
This file system is often called HFS+ and was introduced with
MacOS 8. It includes all Mac specific filesystem data such as
data forks and creator codes, but it also has several UNIX
style features such as file ownership and permissions.
config ADK_KERNEL_NTFS_FS
prompt "NTFS file system support"
tristate
default n
help
NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
Saying Y or M here enables read support. There is partial, but
safe, write support available. For write support you must also
say Y to "NTFS write support" below.
There are also a number of user-space tools available, called
ntfsprogs. These include ntfsundelete and ntfsresize, that work
without NTFS support enabled in the kernel.
This is a rewrite from scratch of Linux NTFS support and replaced
the old NTFS code starting with Linux 2.5.11. A backport to
the Linux 2.4 kernel series is separately available as a patch
from the project web site.
For more information see
and .
If you are not using Windows NT, 2000, XP or 2003 in addition to
Linux on your computer it is safe to say N.
Kernel modules for NTFS support
config ADK_KERNEL_VFAT_FS
prompt "VFAT filesystem support"
tristate
select ADK_KERNEL_NLS_CODEPAGE_850
select ADK_KERNEL_NLS_ISO8859_1
default y if ADK_TARGET_SYSTEM_RASPBERRY_PI
default n
help
This option provides support for normal Windows file systems with
long filenames. That includes non-compressed FAT-based file systems
used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
programs from the mtools package.
The VFAT support enlarges your kernel by about 10 KB Please read the
file for details.
config ADK_KERNEL_XFS_FS
prompt "XFS filesystem support"
tristate
select ADK_KERNEL_EXPORTFS
select ADK_KERNEL_CRYPTO_CRC32C
default n
help
XFS is a high performance journaling filesystem which originated
on the SGI IRIX platform. It is completely multi-threaded, can
support large files and large filesystems, extended attributes,
variable block sizes, is extent based, and makes extensive use of
Btrees (directories, extents, free space) to aid both performance
and scalability.
Refer to the documentation at
for complete details. This implementation is on-disk compatible
with the IRIX version of XFS.
config ADK_KERNEL_FUSE_FS
prompt "Filesystem in Userspace support"
tristate
default m if ADK_PACKAGE_DAVFS2
default m if ADK_PACKAGE_FUSE
default m if ADK_PACKAGE_NTFS_3G
default m if ADK_PACKAGE_WDFS
default n
help
With FUSE it is possible to implement a fully functional
filesystem in a userspace program.
By enabling this, only the kernel module gets build.
For using it, you will most likely also want to enable
fuse-utils.
config ADK_KERNEL_JOLIET
boolean
default n
config ADK_KERNEL_ISO9660_FS
prompt "ISO 9660 / JOLIET CDROM file system support"
tristate
select ADK_KERNEL_JOLIET
default n
help
This is the standard file system used on CD-ROMs. It was previously
known as "High Sierra File System" and is called "hsfs" on other
Unix systems. The so-called Rock-Ridge extensions which allow for
long Unix filenames and symbolic links are also supported by this
driver. If you have a CD-ROM drive and want to do more with it than
just listen to audio CDs and watch its LEDs, say Y (and read
and the CD-ROM-HOWTO,
available from ), thereby
enlarging your kernel by about 27 KB; otherwise say N.
config ADK_KERNEL_UDF_FS
prompt "UDF file system support"
tristate
select ADK_KERNEL_CRC_ITU_T
default n
help
This is the new file system used on some CD-ROMs and DVDs. Say Y if
you intend to mount DVD discs or CDRW's written in packet mode, or
if written to by other UDF utilities, such as DirectCD.
Please read .
config ADK_KERNEL_JFFS2_FS
prompt "JFFS2 filesystem"
tristate
select ADK_KERNEL_MISC_FILESYSTEMS
select ADK_KERNEL_MTD
select ADK_KERNEL_MTD_BLOCK
select ADK_KERNEL_JFFS2_COMPRESSION_OPTIONS
select ADK_KERNEL_JFFS2_ZLIB
depends on ADK_TARGET_WITH_MTD
default n
help
JFFS2 flash filesystem
config ADK_KERNEL_SQUASHFS
prompt "SquashFS filesystem"
tristate
select ADK_KERNEL_MISC_FILESYSTEMS
select ADK_KERNEL_SQUASHFS_XZ
default n
help
Squashfs compressed read-only filesystem
config ADK_KERNEL_YAFFS_FS
prompt "YAFFS2 filesystem"
tristate
select ADK_KERNEL_MISC_FILESYSTEMS
select ADK_KERNEL_MTD
select ADK_KERNEL_MTD_BLOCK
select ADK_KERNEL_YAFFS_YAFFS1
select ADK_KERNEL_YAFFS_YAFFS2
select ADK_KERNEL_YAFFS_AUTO_YAFFS2
depends on ADK_TARGET_WITH_NAND
default n
help
YAFFS2 filesystem for NAND devices
endmenu
menu "Filesystem features"
config ADK_KERNEL_INOTIFY
prompt "Inotify file change notification support"
boolean
default n
help
Say Y here to enable inotify support. Inotify is a file change
notification system and a replacement for dnotify. Inotify fixes
numerous shortcomings in dnotify and introduces several new features
including multiple file events, one-shot support, and unmount
notification.
config ADK_KERNEL_INOTIFY_USER
prompt "Inotify support for userspace"
boolean
depends on ADK_KERNEL_INOTIFY
default n
help
Say Y here to enable inotify support for userspace, including the
associated system calls. Inotify allows monitoring of both files and
directories via a single open fd. Events are read from the file
descriptor, which is also select()- and poll()-able.
endmenu
source target/linux/config/Config.in.fsnet
source target/linux/config/Config.in.nls
source target/linux/config/Config.in.aufs
endmenu