menu "Block devices support" config ADK_KERNEL_MD boolean config ADK_KERNEL_LBD boolean config ADK_KERNEL_BLK_DEV_IO_TRACE boolean config ADK_KERNEL_LSF boolean config ADK_KERNEL_IOSCHED_AS boolean config ADK_KERNEL_IOSCHED_DEADLINE boolean config ADK_KERNEL_IOSCHED_CFQ boolean config ADK_KERNEL_SCSI_DMA boolean config ADK_KERNEL_SCSI_MULTI_LUN boolean config ADK_KERNEL_SCSI_CONSTANTS boolean config ADK_KERNEL_SCSI_LOGGING boolean config ADK_KERNEL_SCSI_SCAN_ASYNC boolean config ADK_KERNEL_ISCSI_TCP boolean config ADK_KERNEL_BLK_DEV boolean config ADK_KERNEL_ATA boolean config ADK_KERNEL_ATA_SFF boolean config ADK_KERNEL_ATA_BMDMA boolean config ADK_KERNEL_SATA_AHCI_PLATFORM boolean config ADK_KERNEL_SATA_PMP boolean config ADK_KERNEL_AHCI_IMX boolean config ADK_KERNEL_CONNECTOR boolean config ADK_KERNEL_MMC boolean config ADK_KERNEL_MMC_BLOCK boolean config ADK_KERNEL_MMC_BLOCK_BOUNCE boolean config ADK_KERNEL_MMC_UNSAFE_RESUME boolean config ADK_KERNEL_MMC_SDHCI boolean config ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS boolean config ADK_KERNEL_MMC_SDHCI_PLTFM boolean config ADK_KERNEL_MMC_SDHCI_BCM2708_DMA boolean menu "SATA/PATA devices support" depends on ADK_TARGET_WITH_PATA || ADK_TARGET_WITH_SATA || ADK_HARDWARE_QEMU config ADK_KERNEL_PATA_RB532 prompt "CF disk driver for Mikrotik RB532" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_MIKROTIK_RB532 default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532 default n config ADK_KERNEL_PATA_AMD prompt "AMD PATA driver" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2 || ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13 || ADK_TARGET_SYSTEM_PCENGINES_ALIX1C || ADK_TARGET_SYSTEM_LEMOTE_YEELONG default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2 default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13 default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default n config ADK_KERNEL_PATA_SC1200 tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_PCENGINES_WRAP default y if ADK_TARGET_SYSTEM_PCENGINES_WRAP default n config ADK_KERNEL_PATA_JMICRON tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD default n config ADK_KERNEL_SATA_AHCI prompt "AHCI SATA driver" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_VBOX_I686 default y if ADK_TARGET_SYSTEM_VBOX_I686 default n help Enables support for AHCI Serial ATA. config ADK_KERNEL_ATA_PIIX prompt "ATA PIIX support" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_SCSI_DMA select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_TARGET_SYSTEM_IBM_X40 default n help ATA PIXX driver config ADK_KERNEL_PATA_MACIO prompt "MAC IO support" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_QEMU_PPC default n config ADK_KERNEL_PATA_PLATFORM tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_QEMU_SH4 || ADK_TARGET_SYSTEM_QEMU_SH4EB default n config ADK_KERNEL_PATA_PCMCIA tristate config ADK_KERNEL_PATA_IMX prompt "eSATA driver for Cubox-i" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD select ADK_KERNEL_ATA select ADK_KERNEL_AHCI_IMX select ADK_KERNEL_SATA_PMP select ADK_KERNEL_SATA_AHCI_PLATFORM depends on ADK_TARGET_SYSTEM_CUBOX_I default y if ADK_TARGET_SYSTEM_CUBOX_I default n config ADK_KERNEL_PATA_PXA prompt "PATA driver for Sharp Zaurus" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_ATA select ADK_KERNEL_ATA_SFF select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD select ADK_KERNEL_PATA_PCMCIA depends on ADK_TARGET_SYSTEM_SHARP_ZAURUS default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS default n help Driver for PATA on Sharp Zaurus endmenu menu "SCSI driver support" depends on ADK_TARGET_WITH_SCSI || ADK_HARDWARE_QEMU config ADK_KERNEL_SCSI_SYM53C8XX_2 prompt "Symbios Logic 53C8XX2 support" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB default n help config ADK_KERNEL_SCSI_IBMVSCSI prompt "IBM VSCSI support" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_QEMU_PPC64 default n help config ADK_KERNEL_SCSI_SUNESP prompt "SUN ESP support" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_QEMU_SPARC default n endmenu menu "SD/MMC driver support" depends on ADK_TARGET_WITH_SD config ADK_KERNEL_MMC_AT91 tristate select ADK_KERNEL_SCSI select ADK_KERNEL_MMC select ADK_KERNEL_MMC_BLOCK select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD depends on ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 default n config ADK_KERNEL_MMC_SDHCI_BCM2708 prompt "SD card support for Raspberry PI" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_MMC select ADK_KERNEL_MMC_BLOCK select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD select ADK_KERNEL_MMC_SDHCI select ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS select ADK_KERNEL_MMC_SDHCI_PLTFM select ADK_KERNEL_MMC_SDHCI_BCM2708_DMA depends on ADK_TARGET_SYSTEM_RASPBERRY_PI default y if ADK_TARGET_SYSTEM_RASPBERRY_PI default n config ADK_KERNEL_MMC_SDHCI_ESDHC_IMX prompt "SD card support for Cubox-i" tristate select ADK_KERNEL_SCSI select ADK_KERNEL_SCSI_DMA select ADK_KERNEL_SCSI_MULTI_LUN select ADK_KERNEL_SCSI_CONSTANTS select ADK_KERNEL_SCSI_LOGGING select ADK_KERNEL_SCSI_SCAN_ASYNC select ADK_KERNEL_MMC select ADK_KERNEL_MMC_BLOCK select ADK_KERNEL_MMC_BLOCK_BOUNCE select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD select ADK_KERNEL_MMC_SDHCI select ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS select ADK_KERNEL_MMC_SDHCI_PLTFM select ADK_KERNEL_MMC_UNSAFE_RESUME depends on ADK_TARGET_SYSTEM_CUBOX_I default y if ADK_TARGET_SYSTEM_CUBOX_I default n endmenu menu "Block driver support" config ADK_KERNEL_SCSI prompt "SCSI support" tristate select ADK_KERNEL_LBD select ADK_KERNEL_LSF select ADK_KERNEL_IOSCHED_AS help If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know the name of your SCSI host adapter (the card inside your computer that "speaks" the SCSI protocol, also called SCSI controller), because you will be asked for it. You also need to say Y here if you have a device which speaks the SCSI protocol. Examples of this include the parallel port version of the IOMEGA ZIP drive, USB storage devices, Fibre Channel, FireWire storage and the IDE-SCSI emulation driver. config ADK_KERNEL_BLK_DEV_SD prompt "SCSI disk support" tristate select ADK_KERNEL_SCSI help If you want to use SCSI hard disks, Fibre Channel disks, USB storage or the SCSI or parallel port version of the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from . This is NOT for SCSI CD-ROMs. config ADK_KERNEL_BLK_DEV_SR prompt "SCSI CDROM support" tristate select ADK_KERNEL_SCSI help If you want to use a SCSI or FireWire CD-ROM under Linux, say Y and read the SCSI-HOWTO and the CDROM-HOWTO at . Also make sure to say Y or M to "ISO 9660 CD-ROM file system support" later. config ADK_KERNEL_BLK_DEV_MD prompt "RAID support" tristate select ADK_KERNEL_MD help config ADK_KERNEL_MD_RAID0 prompt "RAID0 support" tristate depends on ADK_KERNEL_BLK_DEV_MD help config ADK_KERNEL_MD_RAID1 prompt "RAID1 support" tristate depends on ADK_KERNEL_BLK_DEV_MD help config ADK_KERNEL_MD_RAID456 prompt "RAID456 support" tristate depends on ADK_KERNEL_BLK_DEV_MD help config ADK_KERNEL_BLK_DEV_DM prompt "Device Mapper support" tristate select ADK_KERNEL_MD help Device-mapper is a low level volume manager. It works by allowing people to specify mappings for ranges of logical sectors. Various mapping types are available, in addition people may write their own modules containing custom mappings if they wish. Higher level volume managers such as LVM2 use this driver. config ADK_KERNEL_DM_CRYPT prompt "Crypt target support" tristate select ADK_KERNEL_MD select ADK_KERNEL_CRYPTO select ADK_KERNEL_CRYPTO_CBC select ADK_KERNEL_CRYPTO_BLKCIPHER depends on ADK_KERNEL_BLK_DEV_DM default m if ADK_PACKAGE_CRYPTSETUP default n help This device-mapper target allows you to create a device that transparently encrypts the data on it. You'll need to activate the ciphers you're going to use in the cryptoapi configuration. Information on how to use dm-crypt can be found on config ADK_KERNEL_DM_SNAPSHOT prompt "Devicemapper Snapshot target" tristate depends on ADK_KERNEL_BLK_DEV_DM help Allow volume managers to take writable snapshots of a device. config ADK_KERNEL_DM_MIRROR prompt "Devicemapper Mirror target" tristate depends on ADK_KERNEL_BLK_DEV_DM help Allow volume managers to mirror logical volumes, also needed for live data migration tools such as 'pvmove'. config ADK_KERNEL_BLK_DEV_DRBD prompt "DRBD support (Network RAID 1)" tristate select ADK_KERNEL_BLK_DEV select ADK_KERNEL_CONNECTOR help DRBD - http://www.drbd.org config ADK_KERNEL_BLK_DEV_LOOP prompt "Loop mount support" tristate select ADK_KERNEL_BLK_DEV default m if ADK_PACKAGE_LOSETUP default n help Saying Y here will allow you to use a regular file as a block device; you can then create a file system on that block device and mount it just as you would mount other block devices such as hard drive partitions, CD-ROM drives or floppy drives. The loop devices are block special device files with major number 7 and typically called /dev/loop0, /dev/loop1 etc. This is useful if you want to check an ISO 9660 file system before burning the CD, or if you want to use floppy images without first writing them to floppy. Furthermore, some Linux distributions avoid the need for a dedicated Linux partition by keeping their complete root file system inside a DOS FAT file using this loop device driver. To use the loop device, you need the losetup utility, found in the util-linux package, see . The loop device driver can also be used to "hide" a file system in a disk partition, floppy, or regular file, either using encryption (scrambling the data) or steganography (hiding the data in the low bits of, say, a sound file). This is also safe if the file resides on a remote file server. There are several ways of encrypting disks. Some of these require kernel patches. The vanilla kernel offers the cryptoloop option and a Device Mapper target (which is superior, as it supports all file systems). If you want to use the cryptoloop, say Y to both LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12 or later) version of util-linux. Additionally, be aware that the cryptoloop is not safe for storing journaled filesystems. Note that this loop device has nothing to do with the loopback device used for network connections from the machine to itself. config ADK_KERNEL_BLK_DEV_NBD prompt "Network Block Device support" tristate default n help Saying Y here will allow your computer to be a client for network block devices, i.e. it will be able to use block devices exported by servers (mount file systems on them etc.). Communication between client and server works over TCP/IP networking, but to the client program this is hidden: it looks like a regular local file access to a block device special file such as /dev/nd0. Network block devices also allows you to run a block-device in userland (making server and client physically the same computer, communicating using the loopback network device). Read for more information, especially about where to find the server code, which runs in user space and does not need special kernel support. Note that this has nothing to do with the network file systems NFS or Coda; you can say N here even if you intend to use NFS or Coda. config ADK_KERNEL_SWAP prompt "SWAP support" boolean help Kernel swap support endmenu endmenu