# This file is part of the OpenADK project. OpenADK is copyrighted
# material, please see the LICENCE file in the top-level directory.

config ADK_TARGET_CFLAGS
	string
	default "-mcpu=v7.10.d" if ADK_CPU_MICROBLAZE
	default "-m4 -ml" if ADK_CPU_SH4 && ADK_little
	default "-m4 -mb" if ADK_CPU_SH4 && ADK_big
	default "-mcpu=powerpc" if ADK_CPU_PPC
	default "-mcpu=powerpc64" if ADK_CPU_PPC64
	default "-march=geode" if ADK_CPU_GEODE
	default "-march=i486" if ADK_CPU_I486
	default "-march=i586" if ADK_CPU_I586
	default "-march=i686" if ADK_CPU_I686
	default "-march=x86-64" if ADK_CPU_X86_64
	default "-march=athlon" if ADK_CPU_ATHLON
	default "-march=pentium-m" if ADK_CPU_PENTIUM_M
	default "-march=atom" if ADK_CPU_ATOM
	default "-march=amdfam10" if ADK_CPU_AMDFAM10
	default "-mcpu=v8" if ADK_CPU_SPARC_V8
	default "-m64 -mcpu=ultrasparc" if ADK_CPU_SPARC_V9
	default "-march=loongson2f -Wa,-mfix-loongson2f-nop" if ADK_CPU_LOONGSON2F
	default "-march=mips32" if ADK_CPU_MIPS32
	default "-march=mips64" if ADK_CPU_MIPS64
	default "-march=armv8-a" if ADK_CPU_ARMV8
	default "-march=armv5te -mtune=iwmmxt" if ADK_CPU_XSCALE
	default "-march=armv5te -mtune=arm926ej-s -mfloat-abi=soft" if ADK_CPU_ARM926EJ_S && ADK_soft_float
	default "-march=armv5te -mtune=arm926ej-s -mfloat-abi=hard" if ADK_CPU_ARM926EJ_S && ADK_hard_float
	default "-march=armv6 -mtune=arm1176jzf-s -mfloat-abi=soft" if ADK_CPU_ARM1176JZF_S && ADK_soft_float
	default "-march=armv6 -mtune=arm1176jzf-s -mfpu=vfp -mfloat-abi=hard" if ADK_CPU_ARM1176JZF_S && ADK_hard_float
	default "-march=armv7-a -mtune=cortex-a9 -mfloat-abi=soft" if ADK_CPU_CORTEX_A9 && ADK_soft_float
	default "-march=armv7-a -mtune=cortex-a9 -mfpu=neon -mfloat-abi=hard" if ADK_CPU_CORTEX_A9 && ADK_hard_float

config ADK_TARGET_CMDLINE
	string
	default "console=tty0" if ADK_TARGET_SYSTEM_ARANYM_M68K
	default "console=ttyAMA0" if ADK_TARGET_SYSTEM_ARM_FM
	default "console=ttyS0,115200" if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13
	default "console=ttyS0,115200" if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2
	default "console=ttymxc0,115200 console=tty0" if ADK_TARGET_SYSTEM_CUBOX_I && ADK_RUNTIME_VERBOSE_INIT_VGA
	default "console=tty0 console=ttymxc0,115200" if ADK_TARGET_SYSTEM_CUBOX_I && ADK_RUNTIME_VERBOSE_INIT_SERIAL
	default "console=ttyS0,115200 console=tty0" if ADK_TARGET_SYSTEM_IBM_X40 && ADK_RUNTIME_VERBOSE_INIT_VGA
	default "console=tty0 console=ttyS0,115200" if ADK_TARGET_SYSTEM_IBM_X40 && ADK_RUNTIME_VERBOSE_INIT_SERIAL
	default "console=tty0" if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
	default "dwc_otg.fiq_split_enable=1" if ADK_TARGET_SYSTEM_RASPBERRY_PI
	default "console=ttyS0,115200 console=tty0 fbcon=rotate:1" if ADK_TARGET_SYSTEM_SHARP_ZAURUS
	default "console=ttyS0,9600" if ADK_TARGET_SYSTEM_FON_FON2100
	default "console=ttyS0,38400" if ADK_TARGET_SYSTEM_PCENGINES_WRAP
	default "console=ttyS0,115200 console=tty0 geodewdt.nowayout=1" if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C
	default "console=ttyS0,115200 console=tty0" if ADK_TARGET_SYSTEM_VBOX_I686
	default "console=tty0" if ADK_TARGET_QEMU_ARM_MODEL_SPITZ || ADK_TARGET_QEMU_ARM_MODEL_TERRIER
	default "console=ttyAMA0" if ADK_TARGET_QEMU_ARM_MODEL_VERSATILEPB
	default "console=ttyAMA0" if ADK_TARGET_QEMU_ARM_MODEL_VEXPRESS_A9
	default "console=ttyUL0" if ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800
	default "console=ttyS0,115200" if ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605
	default "console=hvc0" if ADK_TARGET_SYSTEM_QEMU_PPC64
	default "console=ttyS0,9600" if ADK_TARGET_SYSTEM_QEMU_PPC
	default "console=ttySC1" if ADK_TARGET_SYSTEM_QEMU_SH
	default "console=ttyS0,115200" if ADK_TARGET_SYSTEM_QEMU_SPARC64
	default "console=ttyS0,115200" if ADK_TARGET_SYSTEM_QEMU_X86 || ADK_TARGET_SYSTEM_QEMU_X86_64
	default ""

choice
prompt "Target firmware type"
depends on !ADK_CHOOSE_TARGET_SYSTEM && !ADK_CHOOSE_TARGET_ARCH && !ADK_TARGET_TOOLCHAIN
default ADK_TARGET_ROOTFS_ARCHIVE

config ADK_TARGET_ROOTFS_INITRAMFS
	boolean "initramfs filesystem"
	depends on \
		ADK_TARGET_QEMU || \
		ADK_LINUX_M68K || \
		ADK_LINUX_ARM || \
		ADK_LINUX_MICROBLAZE || \
		ADK_LINUX_MIPS || \
		ADK_LINUX_PPC || \
		ADK_LINUX_SPARC || \
		ADK_LINUX_X86 || \
		ADK_LINUX_X86_64 || \
		ADK_LINUX_NATIVE
	depends on !ADK_HARDWARE_VBOX
	depends on !ADK_TARGET_SYSTEM_RASPBERRY_PI
	depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532
	select ADK_KERNEL_BLK_DEV_INITRD
	help
	  create an read-only initramfs system.

config ADK_TARGET_ROOTFS_INITRAMFSPIGGYBACK
	boolean "initramfs filesystem included into kernel image"
	select ADK_LINUX_INITRAMFS_BUILTIN
	depends on \
		ADK_TARGET_QEMU || \
		ADK_LINUX_AARCH64 || \
		ADK_LINUX_ARM || \
		ADK_LINUX_M68K || \
		ADK_LINUX_MICROBLAZE || \
		ADK_LINUX_MIPS || \
		ADK_LINUX_PPC || \
		ADK_LINUX_SPARC || \
		ADK_LINUX_X86 || \
		ADK_LINUX_X86_64
	depends on !ADK_HARDWARE_VBOX
	depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532
	help
	  create an read-only initramfs system.

config ADK_TARGET_ROOTFS_SQUASHFS
	boolean "Compressed read-only root filesystem (squashfs)"
	select ADK_KERNEL_SQUASHFS
	select ADK_HOST_NEED_SQUASHFS
	select ADK_HOST_NEED_QEMU if ADK_TARGET_QEMU
	select ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_QEMU
	depends on ADK_TARGET_WITH_MTD || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE
	help
	  highly compressed read-only filesystem for MTD flash systems.

config ADK_TARGET_ROOTFS_JFFS2
	boolean "Compressed read-write root filesystem (jffs2)"
	select ADK_KERNEL_JFFS2_FS
	select ADK_HOST_NEED_MTD_UTILS
	select ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_QEMU
	depends on ADK_TARGET_WITH_MTD || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE
	help
	  compressed read-write filesystem for MTD flash systems.

config ADK_TARGET_ROOTFS_YAFFS
	boolean "YAFFS2 root filesystem (NAND)"
	select ADK_KERNEL_MISC_FILESYSTEMS
	select ADK_KERNEL_YAFFS_FS
	select ADK_KERNEL_YAFFS_YAFFS2
	select ADK_KERNEL_YAFFS_AUTO_YAFFS2
	select ADK_KERNEL_ADDON_YAFFS2
	depends on ADK_TARGET_WITH_NAND
	help
	  Root filesystem on NAND flash with YAFFS2.

config ADK_TARGET_ROOTFS_NFSROOT
	boolean "NFS root"
	select ADK_KERNEL_NETWORK_FILESYSTEMS
	select ADK_KERNEL_SUNRPC
	select ADK_KERNEL_NFS_FS
	select ADK_KERNEL_NFS_V3
	select ADK_KERNEL_ROOT_NFS
	select ADK_KERNEL_NFS_COMMON
	select ADK_KERNEL_IP_PNP
	select ADK_KERNEL_IP_PNP_DHCP
	select ADK_PACKAGE_ADKINSTALL
	depends on !ADK_TARGET_QEMU && !ADK_HARDWARE_VBOX && !ADK_TARGET_SYSTEM_ARANYM_M68K
	depends on !ADK_TARGET_SYSTEM_ARM_FM
	help
	  Root filesystem mounted via NFS. (DHCP)

config ADK_TARGET_ROOTFS_USB
	boolean "Boot from USB stick"
	select ADK_KERNEL_NLS
	select ADK_KERNEL_SCSI
	select ADK_KERNEL_BLK_DEV_SD
	select ADK_KERNEL_USB
	select ADK_KERNEL_USB_EHCI_HCD
	select ADK_KERNEL_USB_OHCI_HCD
	select ADK_KERNEL_USB_UHCI_HCD
	select ADK_KERNEL_USB_STORAGE
	select ADK_KERNEL_EXT2_FS
	select ADK_PACKAGE_ADKINSTALL
	depends on ADK_TARGET_WITH_USB_BOOT
	help
	  Boot system from USB stick.

config ADK_TARGET_ROOTFS_ISO
	boolean "ISO image"
	select ADK_KERNEL_ISO9660_FS
	select ADK_KERNEL_JOLIET
	select ADK_KERNEL_SCSI
	select ADK_KERNEL_BLK_DEV_SR
	select ADK_HOST_NEED_CDRTOOLS
	select ADK_HOST_NEED_SYSLINUX
	select ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_QEMU
	depends on ADK_HOST_LINUX
	depends on ADK_LINUX_X86
	help
	  Use this option to create a bootable ISO image.

config ADK_TARGET_ROOTFS_INITRAMFSARCHIVE
	boolean "Archive usable for initramfs creation"
	depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB532
	help
	  Use this option if your planning to create a initramfs,
	  useful for adk-test-framework.

config ADK_TARGET_ROOTFS_ARCHIVE
	boolean "Archive usable for different filesystems"
	select ADK_HOST_NEED_GENEXT2FS if ADK_TARGET_QEMU
	select ADK_KERNEL_EXT2_FS if ADK_TARGET_QEMU
	select ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_QEMU
	help
	  Use this option if your root filesystem is ext2/ext3/ext4/xfs.

endchoice

config ADK_TARGET_ROOT_EXT4_RASPBERRY_PI
        boolean
	depends on ADK_TARGET_SYSTEM_RASPBERRY_PI && ADK_TARGET_ROOTFS_ARCHIVE
        select ADK_KERNEL_EXT4_FS
	default y
        help
          Compile EXT4 filesystem into kernel and use it as root filesystem.

choice
prompt "Root filesystem type"
depends on ADK_TARGET_ROOTFS_ARCHIVE && !ADK_TARGET_SYSTEM_RASPBERRY_PI && !ADK_TARGET_QEMU
default ADK_TARGET_ROOT_EXT4

config ADK_TARGET_ROOT_EXT4
	boolean
	prompt "EXT4 filesystem"
	select ADK_KERNEL_EXT4_FS
	help
	  Compile EXT4 filesystem into kernel and use it as root filesystem.

config ADK_TARGET_ROOT_XFS
	boolean
	prompt "XFS filesystem"
	select ADK_KERNEL_XFS_FS
	help
	  Compile XFS filesystem into kernel and use it as root filesystem.

config ADK_TARGET_ROOT_EXT2
	boolean
	prompt "EXT2 filesystem"
	select ADK_KERNEL_EXT2_FS
	help
	  Compile EXT2 filesystem into kernel and use it as root filesystem.

config ADK_TARGET_ROOT_EXT3
	boolean
	prompt "EXT3 filesystem"
	select ADK_KERNEL_EXT3_FS
	help
	  Compile EXT3 filesystem into kernel and use it as root filesystem.

endchoice

config ADK_TARGET_ROOTFS
	string
	default "xfs" if ADK_TARGET_ROOT_XFS
	default "ext2" if ADK_TARGET_ROOT_EXT2
	default "ext3" if ADK_TARGET_ROOT_EXT3
	default "ext4" if ADK_TARGET_ROOT_EXT4
	help

config ADK_PACKAGE_SUFFIX
	string
	default "ipk" if ADK_TARGET_PACKAGE_IPKG
	default "tar.xz" if ADK_TARGET_PACKAGE_TXZ
	help

choice
prompt "Target package format"
default ADK_TARGET_PACKAGE_TXZ
depends on !ADK_CHOOSE_TARGET_SYSTEM && !ADK_CHOOSE_TARGET_ARCH

config ADK_TARGET_PACKAGE_TXZ
	boolean
	prompt "xz compressed tar archive"
	help
	  Create compressed tar archives of packages.
	  Pre- and post install scripts will be executed in the target
	  directory. There will be no package manager installed onto the target.

config ADK_TARGET_PACKAGE_IPKG
	boolean
	prompt "ipkg"
	select BUSYBOX_IPKG
	help
	  Create ipkg packages and use ipkg package management on the target.
	  
endchoice

config ADK_TARGET_GPU_MEM
	prompt "Target GPU Memory"
	int
	depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
	default 16
	help
	  use 128 or 256 when you use XBMC