# This file is part of the OpenADK project. OpenADK is copyrighted # material, please see the LICENCE file in the top-level directory. # mark broken devices config ADK_BROKEN bool config ADK_DEVICE_NO_FPU bool config ADK_LINUX_64 bool config ADK_NATIVE tristate config ADK_alix1c tristate config ADK_qemu_x86 tristate config ADK_qemu_mips tristate config ADK_qemu_mipsel tristate config ADK_qemu_mips64 tristate config ADK_qemu_mips64el tristate config ADK_qemu_cris tristate config ADK_rb532 tristate config ADK_rb411 tristate config ADK_rb433 tristate config ADK_zaurus tristate config ADK_foxboard tristate config ADK_lemote tristate config ADK_rescue_x86 tristate config ADK_rescue_x86_64 tristate config ADK_rescue_mips tristate config ADK_rescue_mipsel tristate config ADK_wag54g tristate config ADK_DEVICE string default "alix1c" if ADK_alix1c default "qemu-x86" if ADK_qemu_x86 default "qemu-mips" if ADK_qemu_mips default "qemu-mipsel" if ADK_qemu_mipsel default "qemu-mips64" if ADK_qemu_mips64 default "qemu-mips64el" if ADK_qemu_mips64el default "qemu-cris" if ADK_qemu_cris default "foxboard" if ADK_foxboard default "native" if ADK_NATIVE default "rb532" if ADK_rb532 default "rb411" if ADK_rb411 default "rb433" if ADK_rb433 default "zaurus" if ADK_arm default "lemote" if ADK_lemote default "wag54g" if ADK_wag54g default "rescue-x86" if ADK_rescue_x86 default "rescue-x86_64" if ADK_rescue_x86_64 default "rescue-mips" if ADK_rescue_mips default "rescue-mipsel" if ADK_rescue_mipsel menu "Target system" choice prompt "Embedded Device" default ADK_LINUX_NATIVE config ADK_LINUX_NATIVE bool "Native platform" select ADK_NATIVE help Make a native build. Use host tools. No toolchain will be created. config ADK_LINUX_X86_ALIX1C bool "PC Engines Alix1C" select ADK_alix1c select ADK_KERNEL_SCSI select ADK_KERNEL_EXT2_FS select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_PCI select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_ETHERNET select ADK_KERNEL_MII select BUSYBOX_HWCLOCK help http://www.pcengines.ch/ config ADK_LINUX_CRIS_FOXBOARD bool "Foxboard (ETRAX LX100)" select ADK_foxboard select ADK_PACKAGE_KMOD_USB_CONTROLLER help Foxboard support config ADK_LINUX_MIPS64_LEMOTE bool "Lemote Subnotebook Yeeloong" select ADK_lemote select ADK_LINUX_64 select ADK_KERNEL_BLK_DEV_SD select ADK_KERNEL_INPUT_KEYBOARD select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_PCI select ADK_KERNEL_NET_ETHERNET select ADK_KERNEL_MII select ADK_KERNEL_SWAP help Lemote Subnotebook config ADK_LINUX_MIKROTIK bool "Mikrotik Routerboards" help Support for Mikrotik Routerboards config ADK_LINUX_MIPS_WAG54G bool "Linksys WAG54G" select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_PCI select ADK_KERNEL_NET_ETHERNET select ADK_KERNEL_MII select ADK_wag54g help Linksys WAG54G DSL router with Wireless TI AR7 platform config ADK_LINUX_XSCALE_ZAURUS bool "Zaurus SL-C3200" depends on ADK_BROKEN select ADK_zaurus select ADK_DEVICE_NO_FPU help Support for Sharp Zaurus SL-C3200 (aka Terrier) config ADK_LINUX_RESCUE bool "Minimal Linux Rescuesystem" help Rescuesystem with can be used to Boot from Disk or USB stick. config ADK_LINUX_QEMU bool "Qemu Emulator" help Support for Qemu Emulator endchoice choice prompt "Architecture" depends on ADK_LINUX_RESCUE config ADK_LINUX_X86_64_RESCUE bool "x86_64" select ADK_rescue_x86_64 select ADK_LINUX_64 help X86 architecture. config ADK_LINUX_X86_RESCUE bool "x86" select ADK_rescue_x86 help X86 architecture. config ADK_LINUX_MIPSEL_RESCUE bool "mips (little endian)" select ADK_rescue_mipsel help MIPS LE architecture. config ADK_LINUX_MIPS_RESCUE bool "mips (big endian)" select ADK_rescue_mips help MIPS BE architecture. endchoice choice prompt "Architecture" depends on ADK_LINUX_QEMU config ADK_LINUX_X86_QEMU bool "x86" select ADK_qemu_x86 select ADK_KPACKAGE_KMOD_NE2K_PCI select ADK_KERNEL_INPUT_KEYBOARD help Qemu support for x86 architecture. config ADK_LINUX_MIPS_QEMU bool "mips (big endian)" select ADK_qemu_mips help Qemu support for MIPS BE architecture. config ADK_LINUX_MIPSEL_QEMU bool "mipsel (little endian)" select ADK_qemu_mipsel help Qemu support for MIPS LE architecture. config ADK_LINUX_MIPS64_QEMU bool "mips64 (big endian)" select ADK_qemu_mips64 select ADK_LINUX_64 help Qemu support for MIPS64 BE architecture. config ADK_LINUX_MIPS64EL_QEMU bool "mips64 (little endian)" select ADK_qemu_mips64el select ADK_LINUX_64 help Qemu support for MIPS64 LE architecture. config ADK_LINUX_CRIS_QEMU bool "cris" select ADK_qemu_cris # select ADK_BROKEN help Qemu support for CRISv32 architecture. endchoice choice prompt "Routerboard model" default ADK_LINUX_MIPS_RB433 depends on ADK_LINUX_MIKROTIK config ADK_LINUX_MIPS_RB411 bool "Mikrotik Routerboard 411" select ADK_rb411 select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_PCI select ADK_KERNEL_NETDEV_1000 select ADK_KERNEL_NET_ETHERNET help Support for Mikrotik RB411. config ADK_LINUX_MIPS_RB433 bool "Mikrotik Routerboard 433" select ADK_rb433 select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_PCI select ADK_KERNEL_NETDEV_1000 select ADK_KERNEL_NET_ETHERNET help Support for Mikrotik RB433. config ADK_LINUX_MIPS_RB532 bool "Mikrotik Routerboard 532" select ADK_rb532 select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_PCI select ADK_KERNEL_NET_ETHERNET select ADK_KERNEL_MII help Support for Mikrotik RB532. endchoice choice prompt "Device model" default ADK_LINUX_CRIS_FOXBOARD_CLASSIC depends on ADK_LINUX_CRIS_FOXBOARD config ADK_LINUX_CRIS_FOXBOARD_CLASSIC bool "Foxboard classic (4x16)" help Foxboard classic with red board. (4 MB flash size and 16 MB RAM) config ADK_LINUX_CRIS_FOXBOARD_LX bool "Foxboard LX (8x32)" help Latest Foxboard with green board. (8 MB flash size and 32 MB RAM) endchoice source "target/linux/config/Config.in.kernel" choice prompt "Target C library" depends on ! ADK_NATIVE config ADK_TARGET_LIB_UCLIBC bool "uClibc embedded C library" # broken, because of 16kB pagesize depends on !ADK_LINUX_MIPS64_LEMOTE help http://uclibc.org config ADK_TARGET_LIB_EGLIBC bool "Embedded GNU C library" depends on ADK_LINUX_X86_QEMU || \ ADK_LINUX_MIPS_QEMU || \ ADK_LINUX_MIPS64_QEMU || \ ADK_LINUX_MIPSEL_QEMU || \ ADK_LINUX_MIPS64EL_QEMU || \ ADK_LINUX_X86_ALIX1C || \ ADK_LINUX_MIPS_RB411 || \ ADK_LINUX_MIPS_RB532 || \ ADK_LINUX_RESCUE || \ ADK_LINUX_MIPS64_LEMOTE help http://www.eglibc.org config ADK_TARGET_LIB_GLIBC bool "GNU C library" depends on ADK_LINUX_X86_QEMU || \ ADK_LINUX_MIPS_QEMU || \ ADK_LINUX_MIPS64_QEMU || \ ADK_LINUX_MIPSEL_QEMU || \ ADK_LINUX_MIPS64EL_QEMU || \ ADK_LINUX_X86_ALIX1C || \ ADK_LINUX_MIPS_RB411 || \ ADK_LINUX_RESCUE || \ ADK_LINUX_MIPS64_LEMOTE help http://www.gnu.org/libc endchoice choice prompt "Target Firmware type" default ADK_TARGET_ROOTFS_EXT2_CF config ADK_TARGET_ROOTFS_INITRAMFS bool "initramfs filesystem" depends on ADK_LINUX_X86_QEMU || \ ADK_LINUX_CRIS_QEMU || \ ADK_LINUX_MIPS_QEMU || \ ADK_LINUX_MIPSEL_QEMU || \ ADK_LINUX_MIPS64_QEMU || \ ADK_LINUX_MIPS64EL_QEMU || \ ADK_LINUX_NATIVE || \ ADK_LINUX_RESCUE select ADK_KERNEL_BLK_DEV_INITRD help create an read-only initramfs system. config ADK_TARGET_ROOTFS_SQUASHFS bool "squashfs read-only root filesystem" depends on ADK_LINUX_CRIS_FOXBOARD || \ ADK_LINUX_MIPS_WAG54G help highly compressed read-only filesystem for flash. config ADK_TARGET_ROOTFS_YAFFS bool "YAFFS2 rootfilesystem (NAND)" depends on ADK_LINUX_MIPS_RB532 || \ ADK_LINUX_MIPS_RB433 || \ ADK_LINUX_MIPS_RB411 help Root filesystem on NAND. config ADK_TARGET_ROOTFS_NFSROOT bool "NFS root" depends on ADK_LINUX_CRIS_FOXBOARD || \ ADK_LINUX_X86_ALIX1C || \ ADK_LINUX_MIPS_RB532 || \ ADK_LINUX_MIPS_RB433 || \ ADK_LINUX_MIPS_RB411 || \ ADK_LINUX_MIPS_WAG54G || \ ADK_LINUX_MIPS64_LEMOTE select ADK_KERNEL_NFS_FS select ADK_KERNEL_NFS_V3 select ADK_KERNEL_ROOT_NFS select ADK_KERNEL_NFS_COMMON select ADK_KERNEL_IP_PNP select ADK_KERNEL_IP_PNP_DHCP help Root filesystem mounted via NFS. (DHCP) config ADK_TARGET_ROOTFS_EXT2_CF bool "read-write filesystem for compact flash (ext2)" depends on ADK_LINUX_X86_ALIX1C || ADK_LINUX_MIPS_RB532 select ADK_KERNEL_EXT2_FS select ADK_KERNEL_SCSI select ADK_KERNEL_BLK_DEV_SD help Use this option if you have a compact flash inside your hardware and want to boot from it. config ADK_TARGET_ROOTFS_EXT2 bool "Ext2 read-write filesystem" depends on ADK_LINUX_QEMU || \ ADK_LINUX_XSCALE_ZAURUS || \ ADK_LINUX_MIPS64_LEMOTE select ADK_KERNEL_EXT2_FS help Use this option if your rootfs is ext2. config ADK_TARGET_ROOTFS_ENCRYPTED bool "Encrypted read-write root filesystem" depends on ADK_LINUX_MIPS64_LEMOTE select ADK_LINUX_INITRAMFS_BUILTIN select ADK_PACKAGE_CRYPTINIT select ADK_KERNEL_BLK_DEV_DM select ADK_KERNEL_DM_CRYPT select ADK_KERNEL_CRYPTO_AES select ADK_KERNEL_CRYPTO_CBC select ADK_KERNEL_CRYPTO_SHA256 select ADK_KERNEL_XFS_FS help Use this option if you want an encrypted rootfs. Default is XFS filesystem. Use following commands to setup your hard disk, after booting via NFS or USB. Create at least three partitions with fdisk /dev/sda1 (ext2) /dev/sda2 (encrypted root) /dev/sda3 (swap) mkdir /mnt/{boot,root} cryptsetup luksFormat /dev/sda2 cryptsetup luksOpen /dev/sda2 root cryptsetup luksFormat /dev/sda3 cryptsetup luksOpen /dev/sda3 swap mkswap /dev/mapper/swap mkfs.xfs /dev/mapper/root mount /dev/mapper/root /mnt/root tar xzvf lemote-mips-encryptedroot.tar.gz -C /mnt/root mount /dev/sda1 /mnt/boot mkdir /mnt/boot/boot cp lemote-mips-kernel /mnt/boot/boot mv /mnt/root/boot/boot.cfg /mnt/boot/boot cd /mnt/root ; mknod -m 644 console c 5 1 endchoice config ADK_SSP bool "Enable Stack Smashing Protection" default n depends on ADK_LINUX_X86_ALIX1C || \ ADK_LINUX_CRIS_FOXBOARD help Enable Stack Smashing Protection config ADK_CXX bool "Enable C++ support" default n help Enable C++ Compiler and Libraries config ADK_DEBUG bool "Enable debug support" default n help All packages and libc will be compiled and packaged with debug information. Mostly useful for NFS root or big USB/CF disk setups. config ADK_IPV6 bool "Enable IPv6 support" default n select ADK_KPACKAGE_KMOD_IPV6 select BUSYBOX_FEATURE_IPV6 select BUSYBOX_FEATURE_IFUPDOWN_IPV6 select BUSYBOX_PING6 help Enable basic IPv6 support (kmod-ipv6) and make the IPv6 support options in packages visible. config ADK_X11 bool "Enable X.org/X11 support" default n help Enable Xorg/X11 server and applications in menu. Try to compile other packages with X11 support. (f.e. mplayer) config ADK_DEVELSYSTEM bool "Compile a OpenADK development system" default n select ADK_PACKAGE_BASH select ADK_PACKAGE_MAKE select ADK_PACKAGE_PATCH select ADK_PACKAGE_GCC select ADK_PACKAGE_BINUTILS select ADK_PACKAGE_TAR select ADK_PACKAGE_BZIP2 select ADK_PACKAGE_GAWK help After bootstrapping a Linux system you might want to switch to native builds with your target. If you choose this option, all necessary software needed for native building will be selected. endmenu