# This file is part of the OpenADK project. OpenADK is copyrighted
# material, please see the LICENCE file in the top-level directory.
# mark broken devices
config ADK_BROKEN
bool
config ADK_TARGET_WITH_USB
bool
config ADK_TARGET_WITH_PCI
bool
config ADK_TARGET_WITH_MINIPCI
bool
config ADK_TARGET_WITH_VGA
bool
config ADK_TARGET_WITH_INPUT
bool
config ADK_TARGET_WITH_LEDS
bool
config ADK_TARGET_WITH_PP
bool
config ADK_TARGET_WITH_CARDBUS
bool
config ADK_TARGET_WITH_WATCHDOG
bool
config ADK_TARGET_WITH_DSL
bool
config ADK_TOOLCHAIN_ONLY
bool
config ADK_TARGET_NO_FPU
bool
config ADK_EABI
bool
config ADK_LINUX_64
bool
config ADK_NATIVE
tristate
config ADK_alix1c
tristate
config ADK_alix2d
tristate
config ADK_alix2d13
tristate
config ADK_wrap
tristate
config ADK_arm_toolchain
tristate
config ADK_armel_toolchain
tristate
config ADK_mips_toolchain
tristate
config ADK_mipsel_toolchain
tristate
config ADK_ppc_toolchain
tristate
config ADK_sparc_toolchain
tristate
config ADK_x86_toolchain
tristate
config ADK_x86_64_toolchain
tristate
config ADK_arm_qemu
tristate
config ADK_mips_qemu
tristate
config ADK_mipsel_qemu
tristate
config ADK_mips64_qemu
tristate
config ADK_mips64el_qemu
tristate
config ADK_cris_qemu
tristate
config ADK_x86_qemu
tristate
config ADK_x86_64_qemu
tristate
config ADK_rb532
tristate
config ADK_rb411
tristate
config ADK_rb433
tristate
config ADK_zaurus
tristate
config ADK_foxg20
tristate
config ADK_foxboard
tristate
config ADK_lemote
tristate
config ADK_x86_rescue
tristate
config ADK_x86_64_rescue
tristate
config ADK_mips_rescue
tristate
config ADK_mipsel_rescue
tristate
config ADK_ag241
tristate
config ADK_wag54g
tristate
config ADK_shuttle
tristate
config ADK_TARGET
string
default "alix1c" if ADK_alix1c
default "alix2d" if ADK_alix2d
default "alix2d13" if ADK_alix2d13
default "wrap" if ADK_wrap
default "toolchain-arm" if ADK_arm_toolchain
default "toolchain-armel" if ADK_armel_toolchain
default "toolchain-mips" if ADK_mips_toolchain
default "toolchain-mipsel" if ADK_mipsel_toolchain
default "toolchain-ppc" if ADK_ppc_toolchain
default "toolchain-sparc" if ADK_sparc_toolchain
default "toolchain-x86" if ADK_x86_toolchain
default "toolchain-x86_64" if ADK_x86_64_toolchain
default "qemu-arm" if ADK_arm_qemu
default "qemu-cris" if ADK_cris_qemu
default "qemu-mips" if ADK_mips_qemu
default "qemu-mipsel" if ADK_mipsel_qemu
default "qemu-x86" if ADK_x86_qemu
default "qemu-x86_64" if ADK_x86_64_qemu
default "foxboard" if ADK_foxboard
default "foxg20" if ADK_foxg20
default "native" if ADK_NATIVE
default "rb532" if ADK_rb532
default "rb411" if ADK_rb411
default "rb433" if ADK_rb433
default "zaurus" if ADK_arm
default "lemote" if ADK_lemote
default "wag54g" if ADK_wag54g
default "ag241" if ADK_ag241
default "rescue-x86" if ADK_x86_rescue
default "rescue-x86_64" if ADK_x86_64_rescue
default "rescue-mips" if ADK_mips_rescue
default "rescue-mipsel" if ADK_mipsel_rescue
default "shuttle" if ADK_shuttle
# c library
config ADK_uclibc
tristate
config ADK_eglibc
tristate
config ADK_glibc
tristate
config ADK_LIBC
string
default "uclibc" if ADK_uclibc
default "eglibc" if ADK_eglibc
default "glibc" if ADK_glibc
default "native" if ADK_NATIVE
menu "Target system"
choice
prompt "Embedded Device or Emulator"
default ADK_LINUX_NATIVE
config ADK_LINUX_NATIVE
bool "Native platform"
select ADK_NATIVE
depends on ADK_HOST_LINUX
help
Make a native build. Use host tools.
No toolchain will be created.
config ADK_LINUX_ALIX
bool "ALIX and WRAP boards"
help
Support for Alix and Wrap boards.
http://www.pcengines.ch
config ADK_LINUX_ARM_FOXBOARD
bool "Foxboard (FOXG20)"
select ADK_foxg20
select ADK_EABI
select ADK_KERNEL_NLS
select ADK_PACKAGE_KMOD_USB_CONTROLLER
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_WATCHDOG
help
Support for Foxboard target (foxg20).
http://foxg20.acmesystems.it/doku.php
Status: development
config ADK_LINUX_CRIS_FOXBOARD
bool "Foxboard (ETRAX LX100)"
select ADK_foxboard
select ADK_PACKAGE_KMOD_USB_CONTROLLER
select ADK_KERNEL_NLS
select ADK_TARGET_WITH_USB
help
Support for Foxboard targets.
http://foxlx.acmesystems.it/
Status: stable
config ADK_LINUX_MIPS64_LEMOTE
bool "Lemote Subnotebook Yeeloong"
select ADK_lemote
select ADK_LINUX_64
select ADK_KERNEL_BLK_DEV_SD
select ADK_KERNEL_INPUT_KEYBOARD
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select ADK_KERNEL_SWAP
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_VGA
select ADK_TARGET_WITH_INPUT
help
Lemote Subnotebook.
http://www.lemote.com/english/index.html
http://www.tekmote.nl/
Status: testing
config ADK_LINUX_MIKROTIK
bool "Mikrotik Routerboards"
help
Support for Mikrotik Routerboards
http://www.mikrotik.com
http://www.routerboards.com
#config ADK_LINUX_MIPS_WAG54G
# bool "Linksys WAG54G"
# select ADK_KERNEL_NETDEVICES
# select ADK_KERNEL_NET_PCI
# select ADK_KERNEL_NET_ETHERNET
# select ADK_KERNEL_MII
# select ADK_wag54g
# help
# Linksys WAG54G DSL router with Wireless.
# (Texas Instruments AR7 platform)
config ADK_LINUX_MIPS_AG241
bool "Linksys AG241v2"
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select ADK_PACKAGE_KMOD_SANGAM_ATM
select ADK_KPACKAGE_KMOD_ATM_BR2684
select ADK_PACKAGE_BR2684CTL
select ADK_TARGET_WITH_DSL
select ADK_ag241
help
Linksys AG241 DSL router.
(Texas Instruments AR7 platform)
Status: stable
config ADK_LINUX_XSCALE_ZAURUS
bool "Zaurus SL-C3200"
select ADK_zaurus
select ADK_TARGET_NO_FPU
select ADK_TARGET_WITH_INPUT
depends on ADK_BROKEN
help
Support for Sharp Zaurus SL-C3200 (aka Terrier)
Status: development
config ADK_LINUX_RESCUE
bool "Minimal Linux Rescuesystem"
select ADK_KERNEL_INPUT_KEYBOARD
select ADK_TARGET_WITH_INPUT
help
Rescuesystem with can be used to Boot from Disk or USB stick.
Status: development
config ADK_LINUX_QEMU
bool "Qemu Emulator"
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_MII
select ADK_KERNEL_NET_ETHERNET
select ADK_TARGET_WITH_INPUT
help
Support for Qemu Emulator
config ADK_LINUX_TOOLCHAIN
bool "Toolchain only support"
help
Toolchain only support
config ADK_LINUX_X86_64_SHUTTLE
bool "Shuttle PC"
select ADK_shuttle
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_VGA
select ADK_TARGET_WITH_PCI
select ADK_TARGET_WITH_INPUT
select ADK_TARGET_WITH_PP
select ADK_KERNEL_INPUT_KEYBOARD
select ADK_KERNEL_SCSI
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_SATA_AHCI if ADK_TARGET_ROOTFS_ARCHIVE
select ADK_KERNEL_BLK_DEV_SD if ADK_TARGET_ROOTFS_ARCHIVE
select ADK_KERNEL_BLK_DEV_MD if ADK_TARGET_ROOTFS_ARCHIVE
select ADK_KERNEL_MD_RAID0 if ADK_TARGET_ROOTFS_ARCHIVE
select ADK_KERNEL_MD_RAID1 if ADK_TARGET_ROOTFS_ARCHIVE
select ADK_KPACKAGE_KMOD_SATA_AHCI if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
select ADK_KPACKAGE_KMOD_BLK_DEV_MD if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
select ADK_KPACKAGE_KMOD_MD_RAID0 if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
select ADK_KPACKAGE_KMOD_MD_RAID1 if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
help
Support for a nice and fast shuttle xpc with AMD quad-core CPU.
Status: development
endchoice
choice
prompt "Architecture"
depends on ADK_LINUX_RESCUE
config ADK_LINUX_X86_64_RESCUE
bool "x86_64"
select ADK_x86_64_rescue
help
X86 architecture.
config ADK_LINUX_X86_RESCUE
bool "x86"
select ADK_x86_rescue
help
X86 architecture.
config ADK_LINUX_MIPSEL_RESCUE
bool "mips (little endian)"
select ADK_mipsel_rescue
depends on ADK_BROKEN
help
MIPS LE architecture.
config ADK_LINUX_MIPS_RESCUE
bool "mips (big endian)"
select ADK_mips_rescue
depends on ADK_BROKEN
help
MIPS BE architecture.
endchoice
choice
prompt "Architecture"
depends on ADK_LINUX_TOOLCHAIN
config ADK_LINUX_ARM_TOOLCHAIN
bool "ARM BE Toolchain"
select ADK_arm_toolchain
select ADK_TARGET_NO_FPU
select ADK_EABI
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
config ADK_LINUX_ARMEL_TOOLCHAIN
bool "ARM LE Toolchain"
select ADK_armel_toolchain
select ADK_TARGET_NO_FPU
select ADK_EABI
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
config ADK_LINUX_MIPS_TOOLCHAIN
bool "MIPS BE Toolchain (32 Bit)"
select ADK_mips_toolchain
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
config ADK_LINUX_MIPSEL_TOOLCHAIN
bool "MIPS EL Toolchain (32 Bit)"
select ADK_mipsel_toolchain
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
config ADK_LINUX_PPC_TOOLCHAIN
bool "PPC Toolchain (32 Bit)"
select ADK_ppc_toolchain
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
config ADK_LINUX_SPARC_TOOLCHAIN
bool "SPARC Toolchain (32 Bit)"
select ADK_sparc_toolchain
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
config ADK_LINUX_X86_TOOLCHAIN
bool "X86 Toolchain (32 Bit)"
select ADK_x86_toolchain
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
config ADK_LINUX_X86_64_TOOLCHAIN
bool "X86 Toolchain (64 Bit)"
select ADK_x86_64_toolchain
select ADK_TOOLCHAIN_ONLY
help
Status: toolchain only
endchoice
choice
prompt "Target Optimization"
depends on ADK_LINUX_ARMEL_TOOLCHAIN || ADK_LINUX_ARM_TOOLCHAIN
config ADK_LINUX_ARM_V5TE
bool "armv5te"
help
config ADK_LINUX_ARM_V4T
bool "armv4t"
help
endchoice
config ADK_TARGET_ARCH_OPTIMIZATION
string
default "armv5te" if ADK_LINUX_ARM_V5TE
default "armv4t" if ADK_LINUX_ARM_V4T
choice
prompt "Architecture"
depends on ADK_LINUX_QEMU
config ADK_LINUX_ARM_QEMU
bool "arm"
select ADK_arm_qemu
select ADK_EABI
help
Qemu support for ARM architecture.
Right now this is optimized for Zaurus PDA spitz.
Status: development
config ADK_LINUX_MIPS_QEMU
bool "mips (big endian)"
select ADK_mips_qemu
help
Qemu support for MIPS BE architecture.
Status: stable
config ADK_LINUX_MIPSEL_QEMU
bool "mipsel (little endian)"
select ADK_mipsel_qemu
help
Qemu support for MIPS LE architecture.
Status: stable
config ADK_LINUX_MIPS64_QEMU
bool "mips64 (big endian)"
select ADK_mips64_qemu
select ADK_LINUX_64
depends on ADK_BROKEN
help
Qemu support for MIPS64 BE architecture.
Status: development
config ADK_LINUX_MIPS64EL_QEMU
bool "mips64 (little endian)"
select ADK_mips64el_qemu
select ADK_LINUX_64
depends on ADK_BROKEN
help
Qemu support for MIPS64 LE architecture.
Status: development
config ADK_LINUX_CRIS_QEMU
bool "cris"
select ADK_cris_qemu
depends on ADK_BROKEN
help
Qemu support for CRISv32 architecture.
config ADK_LINUX_X86_QEMU
bool "x86"
select ADK_x86_qemu
select ADK_KPACKAGE_KMOD_8139CP
select ADK_KERNEL_INPUT_KEYBOARD
select ADK_KERNEL_SCSI
select ADK_KERNEL_ATA
select ADK_KERNEL_BLK_DEV_SD
select ADK_KERNEL_CRC32
select ADK_TARGET_WITH_VGA
help
Qemu support for x86 architecture.
Status: stable
config ADK_LINUX_X86_64_QEMU
bool "x86_64"
select ADK_x86_64_qemu
select ADK_KPACKAGE_KMOD_8139CP
select ADK_KERNEL_INPUT_KEYBOARD
select ADK_KERNEL_SCSI
select ADK_KERNEL_ATA
select ADK_KERNEL_BLK_DEV_SD
select ADK_TARGET_WITH_VGA
help
Qemu support for x86_64 architecture.
Status: stable
endchoice
choice
prompt "Alix/Wrap model"
default ADK_LINUX_X86_ALIX1C
depends on ADK_LINUX_ALIX
config ADK_LINUX_X86_ALIX1C
bool "PC Engines Alix1C"
select ADK_alix1c
select ADK_KERNEL_SCSI
select ADK_KERNEL_ATA
select ADK_KERNEL_BLK_DEV_SD
select ADK_KERNEL_EXT2_FS
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select BUSYBOX_HWCLOCK
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_VGA
select ADK_TARGET_WITH_MINIPCI
select ADK_TARGET_WITH_INPUT
help
Support for ALIX1C boards.
http://www.pcengines.ch/
Status: stable
config ADK_LINUX_X86_ALIX2D
bool "PC Engines Alix2D"
select ADK_alix2d
select ADK_KERNEL_SCSI
select ADK_KERNEL_ATA
select ADK_KERNEL_BLK_DEV_SD
select ADK_KERNEL_EXT2_FS
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select BUSYBOX_HWCLOCK
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_MINIPCI
select ADK_TARGET_WITH_LEDS
select ADK_TARGET_WITH_WATCHDOG
help
Support for ALIX2D boards.
http://www.pcengines.ch/
Status: stable
config ADK_LINUX_X86_ALIX2D13
bool "PC Engines Alix2D13"
select ADK_alix2d13
select ADK_KERNEL_SCSI
select ADK_KERNEL_ATA
select ADK_KERNEL_BLK_DEV_SD
select ADK_KERNEL_EXT2_FS
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NEW_LEDS
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select BUSYBOX_HWCLOCK
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_MINIPCI
select ADK_TARGET_WITH_LEDS
help
Support for ALIX2D13 boards.
http://www.pcengines.ch/
Status: stable
config ADK_LINUX_X86_WRAP
bool "PC Engines WRAP"
select ADK_wrap
select ADK_KERNEL_SCSI
select ADK_KERNEL_ATA
select ADK_KERNEL_BLK_DEV_SD
select ADK_KERNEL_EXT2_FS
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select BUSYBOX_HWCLOCK
help
End of life, but I still have one board.
http://www.pcengines.ch/
Status: stable
endchoice
choice
prompt "Routerboard model"
default ADK_LINUX_MIPS_RB532
depends on ADK_LINUX_MIKROTIK
config ADK_LINUX_MIPS_RB411
bool "Mikrotik Routerboard 411"
select ADK_rb411
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NETDEV_1000
select ADK_KERNEL_NET_ETHERNET
select ADK_TARGET_WITH_MINIPCI
depends on ADK_BROKEN
help
Support for Mikrotik RB411.
Status: development
config ADK_LINUX_MIPS_RB433
bool "Mikrotik Routerboard 433"
select ADK_rb433
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NETDEV_1000
select ADK_KERNEL_NET_ETHERNET
select ADK_TARGET_WITH_MINIPCI
depends on ADK_BROKEN
help
Support for Mikrotik RB433.
Status: development
config ADK_LINUX_MIPS_RB532
bool "Mikrotik Routerboard 532"
select ADK_rb532
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_MII
select ADK_KERNEL_ATA
select ADK_KERNEL_BLK_DEV_SD
select ADK_KERNEL_SCSI
select ADK_KERNEL_EXT2_FS
select ADK_TARGET_WITH_MINIPCI
select ADK_TARGET_WITH_WATCHDOG
help
Support for Mikrotik RB532.
Status: stable
endchoice
choice
prompt "Device model"
default ADK_LINUX_CRIS_FOXBOARD_CLASSIC
depends on ADK_LINUX_CRIS_FOXBOARD
config ADK_LINUX_CRIS_FOXBOARD_CLASSIC
bool "Foxboard classic (4x16)"
help
Foxboard classic with red board.
(4 MB flash size and 16 MB RAM)
config ADK_LINUX_CRIS_FOXBOARD_LX
bool "Foxboard LX (8x32)"
help
Latest Foxboard with green board.
(8 MB flash size and 32 MB RAM)
endchoice
source "target/linux/config/Config.in.kernel"
choice
prompt "Target C library"
depends on ! ADK_NATIVE
config ADK_TARGET_LIB_UCLIBC
bool "uClibc embedded C library"
# broken, because of 16kB pagesize
depends on !ADK_LINUX_MIPS64_LEMOTE
select ADK_uclibc
help
http://uclibc.org
config ADK_TARGET_LIB_EGLIBC
bool "Embedded GNU C library"
select ADK_eglibc
depends on ADK_LINUX_X86_QEMU || \
ADK_LINUX_ARM_QEMU || \
ADK_LINUX_MIPS_QEMU || \
ADK_LINUX_MIPS64_QEMU || \
ADK_LINUX_MIPSEL_QEMU || \
ADK_LINUX_MIPS64EL_QEMU || \
ADK_LINUX_X86_64_QEMU || \
ADK_LINUX_X86_ALIX1C || \
ADK_LINUX_X86_ALIX2D || \
ADK_LINUX_X86_ALIX2D13 || \
ADK_LINUX_X86_WRAP || \
ADK_LINUX_MIPS_RB411 || \
ADK_LINUX_MIPS_RB433 || \
ADK_LINUX_MIPS_RB532 || \
ADK_LINUX_RESCUE || \
ADK_LINUX_X86_64_SHUTTLE || \
ADK_LINUX_ARM_TOMTOM || \
ADK_LINUX_ARM_G1 || \
ADK_LINUX_MIPS64_LEMOTE || \
ADK_LINUX_TOOLCHAIN
help
http://www.eglibc.org
config ADK_TARGET_LIB_GLIBC
bool "GNU C library"
select ADK_glibc
depends on ADK_LINUX_X86_QEMU || \
ADK_LINUX_ARM_QEMU || \
ADK_LINUX_MIPS_QEMU || \
ADK_LINUX_MIPS64_QEMU || \
ADK_LINUX_MIPSEL_QEMU || \
ADK_LINUX_MIPS64EL_QEMU || \
ADK_LINUX_X86_64_QEMU || \
ADK_LINUX_X86_ALIX1C || \
ADK_LINUX_X86_ALIX2D || \
ADK_LINUX_X86_ALIX2D13 || \
ADK_LINUX_X86_WRAP || \
ADK_LINUX_MIPS_RB411 || \
ADK_LINUX_MIPS_RB433 || \
ADK_LINUX_RESCUE || \
ADK_LINUX_X86_64_SHUTTLE || \
ADK_LINUX_ARM_TOMTOM || \
ADK_LINUX_ARM_G1 || \
ADK_LINUX_MIPS64_LEMOTE || \
ADK_LINUX_TOOLCHAIN
help
http://www.gnu.org/libc
endchoice
config ADK_TARGET_SUFFIX
string
default "gnueabi" if (ADK_TARGET_LIB_GLIBC || ADK_TARGET_LIB_EGLIBC) && ADK_EABI
default "gnu" if (ADK_TARGET_LIB_GLIBC || ADK_TARGET_LIB_EGLIBC) && !ADK_EABI
default "uclibcgnueabi" if ADK_TARGET_LIB_UCLIBC && ADK_EABI
default "uclibc" if ADK_TARGET_LIB_UCLIBC && !ADK_EABI
choice
prompt "Target Firmware type"
depends on !ADK_TOOLCHAIN_ONLY
default ADK_TARGET_ROOTFS_ARCHIVE
config ADK_TARGET_ROOTFS_INITRAMFS
bool "initramfs filesystem"
depends on \
ADK_LINUX_QEMU || \
ADK_LINUX_NATIVE || \
ADK_LINUX_RESCUE
select ADK_KERNEL_BLK_DEV_INITRD
help
create an read-only initramfs system.
config ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
bool "initramfs filesystem included into kernel image"
select ADK_LINUX_INITRAMFS_BUILTIN
depends on \
ADK_LINUX_QEMU || \
ADK_LINUX_X86_64_SHUTTLE || \
ADK_LINUX_NATIVE || \
ADK_LINUX_RESCUE
help
create an read-only initramfs system.
config ADK_TARGET_ROOTFS_SQUASHFS
bool "Compressed read-only root filesystem (squashfs)"
select ADK_KERNEL_SQUASHFS
depends on \
ADK_LINUX_CRIS_FOXBOARD || \
ADK_LINUX_MIPS_AG241 || \
ADK_LINUX_MIPS_WAG54G
help
highly compressed read-only filesystem for flash.
config ADK_TARGET_ROOTFS_YAFFS
bool "YAFFS2 rootfilesystem (NAND)"
depends on \
ADK_LINUX_MIPS_RB532 || \
ADK_LINUX_MIPS_RB433 || \
ADK_LINUX_MIPS_RB411
help
Root filesystem on NAND.
config ADK_TARGET_ROOTFS_NFSROOT
bool "NFS root"
depends on \
ADK_LINUX_CRIS_FOXBOARD || \
ADK_LINUX_ARM_FOXBOARD || \
ADK_LINUX_X86_ALIX1C || \
ADK_LINUX_X86_ALIX2D || \
ADK_LINUX_X86_ALIX2D13 || \
ADK_LINUX_X86_WRAP || \
ADK_LINUX_MIPS_RB532 || \
ADK_LINUX_MIPS_RB433 || \
ADK_LINUX_MIPS_RB411 || \
ADK_LINUX_MIPS_WAG54G || \
ADK_LINUX_MIPS_AG241 || \
ADK_LINUX_MIPS64_LEMOTE
select ADK_KERNEL_SUNRPC
select ADK_KERNEL_NFS_FS
select ADK_KERNEL_NFS_V3
select ADK_KERNEL_ROOT_NFS
select ADK_KERNEL_NFS_COMMON
select ADK_KERNEL_IP_PNP
select ADK_KERNEL_IP_PNP_DHCP
help
Root filesystem mounted via NFS. (DHCP)
config ADK_TARGET_ROOTFS_EXT2_CF
bool "read-write filesystem for compact flash (ext2)"
depends on \
ADK_LINUX_X86_ALIX1C || \
ADK_LINUX_X86_ALIX2D || \
ADK_LINUX_X86_ALIX2D13 || \
ADK_LINUX_X86_WRAP || \
ADK_LINUX_ARM_FOXBOARD || \
ADK_LINUX_MIPS_RB532
select ADK_KERNEL_EXT2_FS
select ADK_KERNEL_SCSI
help
Use this option if you have a compact flash reader
inside your hardware and want to boot from it.
config ADK_TARGET_ROOTFS_ARCHIVE
bool "Archive usable for different filesystems"
depends on \
ADK_LINUX_QEMU || \
ADK_LINUX_XSCALE_ZAURUS || \
ADK_LINUX_MIPS64_LEMOTE || \
ADK_LINUX_X86_64_SHUTTLE
help
Use this option if your root filesystem is ext2/ext3/ext4/xfs.
config ADK_TARGET_ROOTFS_ENCRYPTED
bool "Encrypted read-write root filesystem"
depends on ADK_LINUX_MIPS64_LEMOTE
select ADK_LINUX_INITRAMFS_BUILTIN
select ADK_PACKAGE_CRYPTINIT
select ADK_KERNEL_BLK_DEV_DM
select ADK_KERNEL_DM_CRYPT
select ADK_KERNEL_CRYPTO_AES
select ADK_KERNEL_CRYPTO_CBC
select ADK_KERNEL_CRYPTO_SHA256
select ADK_KERNEL_XFS_FS
help
Use this option if you want an encrypted rootfs.
Default is XFS filesystem. Use following commands to setup
your hard disk, after booting via NFS or USB.
Create at least three partitions with fdisk
/dev/sda1 (ext2)
/dev/sda2 (encrypted root)
/dev/sda3 (swap)
mkdir /mnt/{boot,root}
cryptsetup luksFormat /dev/sda2
cryptsetup luksOpen /dev/sda2 root
cryptsetup luksFormat /dev/sda3
cryptsetup luksOpen /dev/sda3 swap
mkswap /dev/mapper/swap
mkfs.xfs /dev/mapper/root
mount /dev/mapper/root /mnt/root
tar xzvf lemote-mips-encryptedroot.tar.gz -C /mnt/root
mount /dev/sda1 /mnt/boot
mkdir /mnt/boot/boot
cp lemote-mips-kernel /mnt/boot/boot
mv /mnt/root/boot/boot.cfg /mnt/boot/boot
cd /mnt/root ; mknod -m 644 console c 5 1
endchoice
choice
prompt "Compression method for initramfs and kernel"
depends on ADK_TARGET_ROOTFS_INITRAMFS || ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
config ADK_TARGET_INITRAMFS_COMPRESSION_GZIP
boolean
prompt "gzip"
select ADK_KERNEL_RD_GZIP
select ADK_KERNEL_KERNEL_GZIP
help
Select gzip compression.
config ADK_TARGET_INITRAMFS_COMPRESSION_BZIP2
boolean
prompt "bzip2"
select ADK_KERNEL_RD_BZIP2
select ADK_KERNEL_KERNEL_BZIP2
help
Select BZIP2 compression.
config ADK_TARGET_INITRAMFS_COMPRESSION_LZMA
boolean
prompt "lzma"
select ADK_KERNEL_RD_LZMA
select ADK_KERNEL_KERNEL_LZMA
help
Select LZMA compression.
endchoice
choice
prompt "Compression method for Kernel"
depends on ADK_LINUX_QEMU || ADK_LINUX_ALIX
config ADK_TARGET_KERNEL_COMPRESSION_GZIP
boolean
prompt "gzip"
select ADK_KERNEL_KERNEL_GZIP
help
Select gzip compression for Kernel.
config ADK_TARGET_KERNEL_COMPRESSION_BZIP2
boolean
prompt "bzip2"
select ADK_KERNEL_KERNEL_BZIP2
help
Select BZIP2 compression for Kernel.
config ADK_TARGET_KERNEL_COMPRESSION_LZMA
boolean
prompt "lzma"
select ADK_KERNEL_KERNEL_LZMA
help
Select LZMA compression for Kernel.
endchoice
config ADK_COMPRESSION_TOOL
string
default "gzip -n9" if ADK_TARGET_INITRAMFS_COMPRESSION_GZIP
default "bzip2" if ADK_TARGET_INITRAMFS_COMPRESSION_BZIP2
default "lzma -9" if ADK_TARGET_INITRAMFS_COMPRESSION_LZMA
help
choice
prompt "Root filesystem type"
depends on ADK_TARGET_ROOTFS_ARCHIVE
default ADK_TARGET_ROOT_XFS
config ADK_TARGET_ROOT_XFS
boolean
prompt "XFS filesystem"
select ADK_KERNEL_XFS_FS
help
Compile XFS filesystem into kernel and use it as root filesystem.
config ADK_TARGET_ROOT_EXT2
boolean
prompt "EXT2 filesystem"
select ADK_KERNEL_EXT2_FS
help
Compile EXT2 filesystem into kernel and use it as root filesystem.
config ADK_TARGET_ROOT_EXT3
boolean
prompt "EXT3 filesystem"
select ADK_KERNEL_EXT3_FS
help
Compile EXT3 filesystem into kernel and use it as root filesystem.
config ADK_TARGET_ROOT_EXT4
boolean
prompt "EXT4 filesystem"
select ADK_KERNEL_EXT4_FS
help
Compile EXT4 filesystem into kernel and use it as root filesystem.
endchoice
config ADK_TARGET_ROOTFS
string
default "xfs" if ADK_TARGET_ROOT_XFS
default "ext2" if ADK_TARGET_ROOT_EXT2
default "ext3" if ADK_TARGET_ROOT_EXT3
default "ext4" if ADK_TARGET_ROOT_EXT4
help
config ADK_PACKAGE_SUFFIX
string
default "ipk" if ADK_TARGET_PACKAGE_IPKG
default "tar.gz" if ADK_TARGET_PACKAGE_TGZ
# default "rpm" if ADK_TARGET_PACKAGE_RPM
help
choice
prompt "Package backend format"
default ADK_TARGET_PACKAGE_TGZ
config ADK_TARGET_PACKAGE_IPKG
boolean
prompt "ipkg package format"
select BUSYBOX_IPKG
help
Create ipkg packages and use ipkg package management on
the target.
config ADK_TARGET_PACKAGE_TGZ
boolean
prompt "tar archive (no package manager)"
help
Create compressed tar archives of packages.
Pre- and post install scripts will be executed in the target
directory. There will be no package manager installed onto the target.
#config ADK_TARGET_PACKAGE_RPM
# boolean
# prompt "rpm package format"
# help
# Create rpm packages and use rpm package management on the
# target. WARNING: NOT YET IMPLEMENTED
endchoice
endmenu