From 194b03d5d9dbddc8c00e4da8fcbb0409fcf50d39 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Thu, 12 Sep 2013 07:45:21 +0200 Subject: remove sortext stuff, fix macos x host builds --- .../kernel-headers/patches/3.9.11/sortext.patch | 4947 +++++++++++++++++++- 1 file changed, 4937 insertions(+), 10 deletions(-) (limited to 'toolchain') diff --git a/toolchain/kernel-headers/patches/3.9.11/sortext.patch b/toolchain/kernel-headers/patches/3.9.11/sortext.patch index d82b76a2d..45a8a4985 100644 --- a/toolchain/kernel-headers/patches/3.9.11/sortext.patch +++ b/toolchain/kernel-headers/patches/3.9.11/sortext.patch @@ -1,22 +1,4949 @@ -diff -Nur linux-3.5.2.orig/arch/mips/Kconfig linux-3.5.2/arch/mips/Kconfig ---- linux-3.5.2.orig/arch/mips/Kconfig 2012-08-15 16:55:25.000000000 +0200 -+++ linux-3.5.2/arch/mips/Kconfig 2012-08-23 11:10:29.000000000 +0200 -@@ -31,7 +31,6 @@ +diff -Nur linux-3.9.11.orig/arch/arm/Kconfig linux-3.9.11/arch/arm/Kconfig +--- linux-3.9.11.orig/arch/arm/Kconfig 2013-07-21 02:16:17.000000000 +0200 ++++ linux-3.9.11/arch/arm/Kconfig 2013-09-12 07:26:36.000000000 +0200 +@@ -6,7 +6,6 @@ + select ARCH_HAVE_CUSTOM_GPIO_H + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select ARCH_WANT_IPC_PARSE_VERSION +- select BUILDTIME_EXTABLE_SORT if MMU + select CPU_PM if (SUSPEND || CPU_IDLE) + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU + select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) +diff -Nur linux-3.9.11.orig/arch/mips/Kconfig linux-3.9.11/arch/mips/Kconfig +--- linux-3.9.11.orig/arch/mips/Kconfig 2013-07-21 02:16:17.000000000 +0200 ++++ linux-3.9.11/arch/mips/Kconfig 2013-09-12 07:26:20.000000000 +0200 +@@ -34,7 +34,6 @@ select HAVE_MEMBLOCK_NODE_MAP select ARCH_DISCARD_MEMBLOCK select GENERIC_SMP_IDLE_THREAD - select BUILDTIME_EXTABLE_SORT select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE - -diff -Nur linux-3.5.2.orig/arch/x86/Kconfig linux-3.5.2/arch/x86/Kconfig ---- linux-3.5.2.orig/arch/x86/Kconfig 2012-08-15 16:55:25.000000000 +0200 -+++ linux-3.5.2/arch/x86/Kconfig 2012-08-23 11:10:17.000000000 +0200 -@@ -85,7 +85,6 @@ - select DCACHE_WORD_ACCESS + select HAVE_MOD_ARCH_SPECIFIC +diff -Nur linux-3.9.11.orig/arch/mips/Kconfig.orig linux-3.9.11/arch/mips/Kconfig.orig +--- linux-3.9.11.orig/arch/mips/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-3.9.11/arch/mips/Kconfig.orig 2013-07-21 02:16:17.000000000 +0200 +@@ -0,0 +1,2557 @@ ++config MIPS ++ bool ++ default y ++ select HAVE_GENERIC_DMA_COHERENT ++ select HAVE_IDE ++ select HAVE_OPROFILE ++ select HAVE_PERF_EVENTS ++ select PERF_USE_VMALLOC ++ select HAVE_ARCH_KGDB ++ select ARCH_HAVE_CUSTOM_GPIO_H ++ select HAVE_FUNCTION_TRACER ++ select HAVE_FUNCTION_TRACE_MCOUNT_TEST ++ select HAVE_DYNAMIC_FTRACE ++ select HAVE_FTRACE_MCOUNT_RECORD ++ select HAVE_C_RECORDMCOUNT ++ select HAVE_FUNCTION_GRAPH_TRACER ++ select HAVE_KPROBES ++ select HAVE_KRETPROBES ++ select HAVE_DEBUG_KMEMLEAK ++ select ARCH_BINFMT_ELF_RANDOMIZE_PIE ++ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT ++ select RTC_LIB if !MACH_LOONGSON ++ select GENERIC_ATOMIC64 if !64BIT ++ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE ++ select HAVE_DMA_ATTRS ++ select HAVE_DMA_API_DEBUG ++ select HAVE_GENERIC_HARDIRQS ++ select GENERIC_IRQ_PROBE ++ select GENERIC_IRQ_SHOW ++ select HAVE_ARCH_JUMP_LABEL ++ select ARCH_WANT_IPC_PARSE_VERSION ++ select IRQ_FORCED_THREADING ++ select HAVE_MEMBLOCK ++ select HAVE_MEMBLOCK_NODE_MAP ++ select ARCH_DISCARD_MEMBLOCK ++ select GENERIC_SMP_IDLE_THREAD ++ select BUILDTIME_EXTABLE_SORT ++ select GENERIC_CLOCKEVENTS ++ select GENERIC_CMOS_UPDATE ++ select HAVE_MOD_ARCH_SPECIFIC ++ select VIRT_TO_BUS ++ select MODULES_USE_ELF_REL if MODULES ++ select MODULES_USE_ELF_RELA if MODULES && 64BIT ++ select CLONE_BACKWARDS ++ ++menu "Machine selection" ++ ++config ZONE_DMA ++ bool ++ ++choice ++ prompt "System type" ++ default SGI_IP22 ++ ++config MIPS_ALCHEMY ++ bool "Alchemy processor based machines" ++ select 64BIT_PHYS_ADDR ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_APM_EMULATION ++ select GENERIC_GPIO ++ select ARCH_WANT_OPTIONAL_GPIOLIB ++ select SYS_SUPPORTS_ZBOOT ++ select USB_ARCH_HAS_OHCI ++ select USB_ARCH_HAS_EHCI ++ ++config AR7 ++ bool "Texas Instruments AR7" ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select NO_EXCEPT_FILL ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_ZBOOT_UART16550 ++ select ARCH_REQUIRE_GPIOLIB ++ select VLYNQ ++ select HAVE_CLK ++ help ++ Support for the Texas Instruments AR7 System-on-a-Chip ++ family: TNETD7100, 7200 and 7300. ++ ++config ATH79 ++ bool "Atheros AR71XX/AR724X/AR913X based boards" ++ select ARCH_REQUIRE_GPIOLIB ++ select BOOT_RAW ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HAVE_CLK ++ select IRQ_CPU ++ select MIPS_MACHINE ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ help ++ Support for the Atheros AR71XX/AR724X/AR913X SoCs. ++ ++config BCM47XX ++ bool "Broadcom BCM47XX based boards" ++ select ARCH_WANT_OPTIONAL_GPIOLIB ++ select BOOT_RAW ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select FW_CFE ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select NO_EXCEPT_FILL ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ help ++ Support for BCM47XX based boards ++ ++config BCM63XX ++ bool "Broadcom BCM63XX based boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select SWAP_IO_SPACE ++ select ARCH_REQUIRE_GPIOLIB ++ select HAVE_CLK ++ help ++ Support for BCM63XX based boards ++ ++config MIPS_COBALT ++ bool "Cobalt Server" ++ select CEVT_R4K ++ select CSRC_R4K ++ select CEVT_GT641XX ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select I8253 ++ select I8259 ++ select IRQ_CPU ++ select IRQ_GT641XX ++ select PCI_GT64XXX_PCI0 ++ select PCI ++ select SYS_HAS_CPU_NEVADA ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config MACH_DECSTATION ++ bool "DECstations" ++ select BOOT_ELF32 ++ select CEVT_DS1287 ++ select CEVT_R4K ++ select CSRC_IOASIC ++ select CSRC_R4K ++ select CPU_DADDI_WORKAROUNDS if 64BIT ++ select CPU_R4000_WORKAROUNDS if 64BIT ++ select CPU_R4400_WORKAROUNDS if 64BIT ++ select DMA_NONCOHERENT ++ select NO_IOPORT ++ select IRQ_CPU ++ select SYS_HAS_CPU_R3000 ++ select SYS_HAS_CPU_R4X00 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_128HZ ++ select SYS_SUPPORTS_256HZ ++ select SYS_SUPPORTS_1024HZ ++ help ++ This enables support for DEC's MIPS based workstations. For details ++ see the Linux/MIPS FAQ on and the ++ DECstation porting pages on . ++ ++ If you have one of the following DECstation Models you definitely ++ want to choose R4xx0 for the CPU Type: ++ ++ DECstation 5000/50 ++ DECstation 5000/150 ++ DECstation 5000/260 ++ DECsystem 5900/260 ++ ++ otherwise choose R3000. ++ ++config MACH_JAZZ ++ bool "Jazz family of machines" ++ select FW_ARC ++ select FW_ARC32 ++ select ARCH_MAY_HAVE_PC_FDC ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN ++ select GENERIC_ISA_DMA ++ select HAVE_PCSPKR_PLATFORM ++ select IRQ_CPU ++ select I8253 ++ select I8259 ++ select ISA ++ select SYS_HAS_CPU_R4X00 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_100HZ ++ help ++ This a family of machines based on the MIPS R4030 chipset which was ++ used by several vendors to build RISC/os and Windows NT workstations. ++ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and ++ Olivetti M700-10 workstations. ++ ++config MACH_JZ4740 ++ bool "Ingenic JZ4740 based machines" ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_ZBOOT_UART16550 ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select GENERIC_GPIO ++ select ARCH_REQUIRE_GPIOLIB ++ select SYS_HAS_EARLY_PRINTK ++ select HAVE_PWM ++ select HAVE_CLK ++ select GENERIC_IRQ_CHIP ++ ++config LANTIQ ++ bool "Lantiq based platforms" ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select CEVT_R4K ++ select CSRC_R4K ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_MULTITHREADING ++ select SYS_HAS_EARLY_PRINTK ++ select ARCH_REQUIRE_GPIOLIB ++ select SWAP_IO_SPACE ++ select BOOT_RAW ++ select HAVE_MACH_CLKDEV ++ select CLKDEV_LOOKUP ++ select USE_OF ++ select PINCTRL ++ select PINCTRL_LANTIQ ++ ++config LASAT ++ bool "LASAT Networks platforms" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select SYS_HAS_EARLY_PRINTK ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select PCI_GT64XXX_PCI0 ++ select MIPS_NILE4 ++ select R5000_CPU_SCACHE ++ select SYS_HAS_CPU_R5000 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL if BROKEN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config MACH_LOONGSON ++ bool "Loongson family of machines" ++ select SYS_SUPPORTS_ZBOOT ++ help ++ This enables the support of Loongson family of machines. ++ ++ Loongson is a family of general-purpose MIPS-compatible CPUs. ++ developed at Institute of Computing Technology (ICT), ++ Chinese Academy of Sciences (CAS) in the People's Republic ++ of China. The chief architect is Professor Weiwu Hu. ++ ++config MACH_LOONGSON1 ++ bool "Loongson 1 family of machines" ++ select SYS_SUPPORTS_ZBOOT ++ help ++ This enables support for the Loongson 1 based machines. ++ ++ Loongson 1 is a family of 32-bit MIPS-compatible SoCs developed by ++ the ICT (Institute of Computing Technology) and the Chinese Academy ++ of Sciences. ++ ++config MIPS_MALTA ++ bool "MIPS Malta board" ++ select ARCH_MAY_HAVE_PC_FDC ++ select BOOT_ELF32 ++ select BOOT_RAW ++ select CEVT_R4K ++ select CSRC_R4K ++ select CSRC_GIC ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA ++ select HAVE_PCSPKR_PLATFORM ++ select IRQ_CPU ++ select IRQ_GIC ++ select HW_HAS_PCI ++ select I8253 ++ select I8259 ++ select MIPS_BOARDS_GEN ++ select MIPS_BONITO64 ++ select MIPS_CPU_SCACHE ++ select PCI_GT64XXX_PCI0 ++ select MIPS_MSC ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_CPU_MIPS64_R1 ++ select SYS_HAS_CPU_MIPS64_R2 ++ select SYS_HAS_CPU_NEVADA ++ select SYS_HAS_CPU_RM7000 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_MIPS_CMP ++ select SYS_SUPPORTS_MULTITHREADING ++ select SYS_SUPPORTS_SMARTMIPS ++ select SYS_SUPPORTS_ZBOOT ++ help ++ This enables support for the MIPS Technologies Malta evaluation ++ board. ++ ++config MIPS_SEAD3 ++ bool "MIPS SEAD3 board" ++ select BOOT_ELF32 ++ select BOOT_RAW ++ select CEVT_R4K ++ select CSRC_R4K ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select IRQ_GIC ++ select MIPS_BOARDS_GEN ++ select MIPS_CPU_SCACHE ++ select MIPS_MSC ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_CPU_MIPS64_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_SMARTMIPS ++ select USB_ARCH_HAS_EHCI ++ select USB_EHCI_BIG_ENDIAN_DESC ++ select USB_EHCI_BIG_ENDIAN_MMIO ++ select USE_OF ++ help ++ This enables support for the MIPS Technologies SEAD3 evaluation ++ board. ++ ++config NEC_MARKEINS ++ bool "NEC EMMA2RH Mark-eins board" ++ select SOC_EMMA2RH ++ select HW_HAS_PCI ++ help ++ This enables support for the NEC Electronics Mark-eins boards. ++ ++config MACH_VR41XX ++ bool "NEC VR4100 series based machines" ++ select CEVT_R4K ++ select CSRC_R4K ++ select SYS_HAS_CPU_VR41XX ++ select ARCH_REQUIRE_GPIOLIB ++ ++config NXP_STB220 ++ bool "NXP STB220 board" ++ select SOC_PNX833X ++ help ++ Support for NXP Semiconductors STB220 Development Board. ++ ++config NXP_STB225 ++ bool "NXP 225 board" ++ select SOC_PNX833X ++ select SOC_PNX8335 ++ help ++ Support for NXP Semiconductors STB225 Development Board. ++ ++config PMC_MSP ++ bool "PMC-Sierra MSP chipsets" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select SWAP_IO_SPACE ++ select NO_EXCEPT_FILL ++ select BOOT_RAW ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select IRQ_CPU ++ select SERIAL_8250 ++ select SERIAL_8250_CONSOLE ++ help ++ This adds support for the PMC-Sierra family of Multi-Service ++ Processor System-On-A-Chips. These parts include a number ++ of integrated peripherals, interfaces and DSPs in addition to ++ a variety of MIPS cores. ++ ++config POWERTV ++ bool "Cisco PowerTV" ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select CSRC_POWERTV ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select USB_OHCI_LITTLE_ENDIAN ++ help ++ This enables support for the Cisco PowerTV Platform. ++ ++config RALINK ++ bool "Ralink based machines" ++ select CEVT_R4K ++ select CSRC_R4K ++ select BOOT_RAW ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select USE_OF ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select HAVE_MACH_CLKDEV ++ select CLKDEV_LOOKUP ++ ++config SGI_IP22 ++ bool "SGI IP22 (Indy/Indigo2)" ++ select FW_ARC ++ select FW_ARC32 ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION ++ select DMA_NONCOHERENT ++ select HW_HAS_EISA ++ select I8253 ++ select I8259 ++ select IP22_CPU_SCACHE ++ select IRQ_CPU ++ select GENERIC_ISA_DMA_SUPPORT_BROKEN ++ select SGI_HAS_I8042 ++ select SGI_HAS_INDYDOG ++ select SGI_HAS_HAL2 ++ select SGI_HAS_SEEQ ++ select SGI_HAS_WD93 ++ select SGI_HAS_ZILOG ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_R4X00 ++ select SYS_HAS_CPU_R5000 ++ # ++ # Disable EARLY_PRINTK for now since it leads to overwritten prom ++ # memory during early boot on some machines. ++ # ++ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com ++ # for a more details discussion ++ # ++ # select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ help ++ This are the SGI Indy, Challenge S and Indigo2, as well as certain ++ OEM variants like the Tandem CMN B006S. To compile a Linux kernel ++ that runs on these, say Y here. ++ ++config SGI_IP27 ++ bool "SGI IP27 (Origin200/2000)" ++ select FW_ARC ++ select FW_ARC64 ++ select BOOT_ELF64 ++ select DEFAULT_SGI_PARTITION ++ select DMA_COHERENT ++ select SYS_HAS_EARLY_PRINTK ++ select HW_HAS_PCI ++ select NR_CPUS_DEFAULT_64 ++ select SYS_HAS_CPU_R10000 ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_NUMA ++ select SYS_SUPPORTS_SMP ++ help ++ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics ++ workstations. To compile a Linux kernel that runs on these, say Y ++ here. ++ ++config SGI_IP28 ++ bool "SGI IP28 (Indigo2 R10k)" ++ select FW_ARC ++ select FW_ARC64 ++ select BOOT_ELF64 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA_SUPPORT_BROKEN ++ select IRQ_CPU ++ select HW_HAS_EISA ++ select I8253 ++ select I8259 ++ select SGI_HAS_I8042 ++ select SGI_HAS_INDYDOG ++ select SGI_HAS_HAL2 ++ select SGI_HAS_SEEQ ++ select SGI_HAS_WD93 ++ select SGI_HAS_ZILOG ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_R10000 ++ # ++ # Disable EARLY_PRINTK for now since it leads to overwritten prom ++ # memory during early boot on some machines. ++ # ++ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com ++ # for a more details discussion ++ # ++ # select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ help ++ This is the SGI Indigo2 with R10000 processor. To compile a Linux ++ kernel that runs on these, say Y here. ++ ++config SGI_IP32 ++ bool "SGI IP32 (O2)" ++ select FW_ARC ++ select FW_ARC32 ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select R5000_CPU_SCACHE ++ select RM7000_CPU_SCACHE ++ select SYS_HAS_CPU_R5000 ++ select SYS_HAS_CPU_R10000 if BROKEN ++ select SYS_HAS_CPU_RM7000 ++ select SYS_HAS_CPU_NEVADA ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ help ++ If you want this kernel to run on SGI O2 workstation, say Y here. ++ ++config SIBYTE_CRHINE ++ bool "Sibyte BCM91120C-CRhine" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1120 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_CARMEL ++ bool "Sibyte BCM91120x-Carmel" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1120 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_CRHONE ++ bool "Sibyte BCM91125C-CRhone" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1125 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_RHONE ++ bool "Sibyte BCM91125E-Rhone" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1125H ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_SWARM ++ bool "Sibyte BCM91250A-SWARM" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select HAVE_PATA_PLATFORM ++ select NR_CPUS_DEFAULT_2 ++ select SIBYTE_SB1250 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select ZONE_DMA32 if 64BIT ++ ++config SIBYTE_LITTLESUR ++ bool "Sibyte BCM91250C2-LittleSur" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select HAVE_PATA_PLATFORM ++ select NR_CPUS_DEFAULT_2 ++ select SIBYTE_SB1250 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_SENTOSA ++ bool "Sibyte BCM91250E-Sentosa" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select NR_CPUS_DEFAULT_2 ++ select SIBYTE_SB1250 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_BIGSUR ++ bool "Sibyte BCM91480B-BigSur" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select NR_CPUS_DEFAULT_4 ++ select SIBYTE_BCM1x80 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select ZONE_DMA32 if 64BIT ++ ++config SNI_RM ++ bool "SNI RM200/300/400" ++ select FW_ARC if CPU_LITTLE_ENDIAN ++ select FW_ARC32 if CPU_LITTLE_ENDIAN ++ select FW_SNIPROM if CPU_BIG_ENDIAN ++ select ARCH_MAY_HAVE_PC_FDC ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA ++ select HAVE_PCSPKR_PLATFORM ++ select HW_HAS_EISA ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select I8253 ++ select I8259 ++ select ISA ++ select SWAP_IO_SPACE if CPU_BIG_ENDIAN ++ select SYS_HAS_CPU_R4X00 ++ select SYS_HAS_CPU_R5000 ++ select SYS_HAS_CPU_R10000 ++ select R5000_CPU_SCACHE ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ help ++ The SNI RM200/300/400 are MIPS-based machines manufactured by ++ Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid ++ Technology and now in turn merged with Fujitsu. Say Y here to ++ support this machine type. ++ ++config MACH_TX39XX ++ bool "Toshiba TX39 series based machines" ++ ++config MACH_TX49XX ++ bool "Toshiba TX49 series based machines" ++ ++config MIKROTIK_RB532 ++ bool "Mikrotik RB532 boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SWAP_IO_SPACE ++ select BOOT_RAW ++ select ARCH_REQUIRE_GPIOLIB ++ help ++ Support the Mikrotik(tm) RouterBoard 532 series, ++ based on the IDT RC32434 SoC. ++ ++config WR_PPMC ++ bool "Wind River PPMC board" ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select PCI_GT64XXX_PCI0 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_CPU_MIPS64_R1 ++ select SYS_HAS_CPU_NEVADA ++ select SYS_HAS_CPU_RM7000 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ help ++ This enables support for the Wind River MIPS32 4KC PPMC evaluation ++ board, which is based on GT64120 bridge chip. ++ ++config CAVIUM_OCTEON_SIMULATOR ++ bool "Cavium Networks Octeon Simulator" ++ select CEVT_R4K ++ select 64BIT_PHYS_ADDR ++ select DMA_COHERENT ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ select SYS_HAS_CPU_CAVIUM_OCTEON ++ select HOLES_IN_ZONE ++ help ++ The Octeon simulator is software performance model of the Cavium ++ Octeon Processor. It supports simulating Octeon processors on x86 ++ hardware. ++ ++config CAVIUM_OCTEON_REFERENCE_BOARD ++ bool "Cavium Networks Octeon reference board" ++ select CEVT_R4K ++ select 64BIT_PHYS_ADDR ++ select DMA_COHERENT ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select EDAC_SUPPORT ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_HAS_CPU_CAVIUM_OCTEON ++ select SWAP_IO_SPACE ++ select HW_HAS_PCI ++ select ARCH_SUPPORTS_MSI ++ select ZONE_DMA32 ++ select USB_ARCH_HAS_OHCI ++ select USB_ARCH_HAS_EHCI ++ select HOLES_IN_ZONE ++ help ++ This option supports all of the Octeon reference boards from Cavium ++ Networks. It builds a kernel that dynamically determines the Octeon ++ CPU type and supports all known board reference implementations. ++ Some of the supported boards are: ++ EBT3000 ++ EBH3000 ++ EBH3100 ++ Thunder ++ Kodama ++ Hikari ++ Say Y here for most Octeon reference boards. ++ ++config NLM_XLR_BOARD ++ bool "Netlogic XLR/XLS based systems" ++ select BOOT_ELF32 ++ select NLM_COMMON ++ select SYS_HAS_CPU_XLR ++ select SYS_SUPPORTS_SMP ++ select HW_HAS_PCI ++ select SWAP_IO_SPACE ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select 64BIT_PHYS_ADDR ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select DMA_COHERENT ++ select NR_CPUS_DEFAULT_32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select ARCH_SUPPORTS_MSI ++ select ZONE_DMA32 if 64BIT ++ select SYNC_R4K ++ select SYS_HAS_EARLY_PRINTK ++ select USB_ARCH_HAS_OHCI if USB_SUPPORT ++ select USB_ARCH_HAS_EHCI if USB_SUPPORT ++ help ++ Support for systems based on Netlogic XLR and XLS processors. ++ Say Y here if you have a XLR or XLS based board. ++ ++config NLM_XLP_BOARD ++ bool "Netlogic XLP based systems" ++ select BOOT_ELF32 ++ select NLM_COMMON ++ select SYS_HAS_CPU_XLP ++ select SYS_SUPPORTS_SMP ++ select HW_HAS_PCI ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select 64BIT_PHYS_ADDR ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select DMA_COHERENT ++ select NR_CPUS_DEFAULT_32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select ZONE_DMA32 if 64BIT ++ select SYNC_R4K ++ select SYS_HAS_EARLY_PRINTK ++ select USE_OF ++ help ++ This board is based on Netlogic XLP Processor. ++ Say Y here if you have a XLP based board. ++ ++endchoice ++ ++source "arch/mips/alchemy/Kconfig" ++source "arch/mips/ath79/Kconfig" ++source "arch/mips/bcm47xx/Kconfig" ++source "arch/mips/bcm63xx/Kconfig" ++source "arch/mips/jazz/Kconfig" ++source "arch/mips/jz4740/Kconfig" ++source "arch/mips/lantiq/Kconfig" ++source "arch/mips/lasat/Kconfig" ++source "arch/mips/pmcs-msp71xx/Kconfig" ++source "arch/mips/powertv/Kconfig" ++source "arch/mips/ralink/Kconfig" ++source "arch/mips/sgi-ip27/Kconfig" ++source "arch/mips/sibyte/Kconfig" ++source "arch/mips/txx9/Kconfig" ++source "arch/mips/vr41xx/Kconfig" ++source "arch/mips/cavium-octeon/Kconfig" ++source "arch/mips/loongson/Kconfig" ++source "arch/mips/loongson1/Kconfig" ++source "arch/mips/netlogic/Kconfig" ++ ++endmenu ++ ++config RWSEM_GENERIC_SPINLOCK ++ bool ++ default y ++ ++config RWSEM_XCHGADD_ALGORITHM ++ bool ++ ++config ARCH_HAS_ILOG2_U32 ++ bool ++ default n ++ ++config ARCH_HAS_ILOG2_U64 ++ bool ++ default n ++ ++config GENERIC_HWEIGHT ++ bool ++ default y ++ ++config GENERIC_CALIBRATE_DELAY ++ bool ++ default y ++ ++config SCHED_OMIT_FRAME_POINTER ++ bool ++ default y ++ ++# ++# Select some configuration options automatically based on user selections. ++# ++config FW_ARC ++ bool ++ ++config ARCH_MAY_HAVE_PC_FDC ++ bool ++ ++config BOOT_RAW ++ bool ++ ++config CEVT_BCM1480 ++ bool ++ ++config CEVT_DS1287 ++ bool ++ ++config CEVT_GT641XX ++ bool ++ ++config CEVT_R4K ++ bool ++ ++config CEVT_SB1250 ++ bool ++ ++config CEVT_TXX9 ++ bool ++ ++config CSRC_BCM1480 ++ bool ++ ++config CSRC_IOASIC ++ bool ++ ++config CSRC_POWERTV ++ bool ++ ++config CSRC_R4K ++ bool ++ ++config CSRC_GIC ++ bool ++ ++config CSRC_SB1250 ++ bool ++ ++config GPIO_TXX9 ++ select GENERIC_GPIO ++ select ARCH_REQUIRE_GPIOLIB ++ bool ++ ++config FW_CFE ++ bool ++ ++config ARCH_DMA_ADDR_T_64BIT ++ def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT ++ ++config DMA_COHERENT ++ bool ++ ++config DMA_NONCOHERENT ++ bool ++ select NEED_DMA_MAP_STATE ++ ++config NEED_DMA_MAP_STATE ++ bool ++ ++config SYS_HAS_EARLY_PRINTK ++ bool ++ ++config HOTPLUG_CPU ++ bool "Support for hot-pluggable CPUs" ++ depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU ++ help ++ Say Y here to allow turning CPUs off and on. CPUs can be ++ controlled through /sys/devices/system/cpu. ++ (Note: power management support will enable this option ++ automatically on SMP systems. ) ++ Say N if you want to disable CPU hotplug. ++ ++config SYS_SUPPORTS_HOTPLUG_CPU ++ bool ++ ++config I8259 ++ bool ++ ++config MIPS_BONITO64 ++ bool ++ ++config MIPS_MSC ++ bool ++ ++config MIPS_NILE4 ++ bool ++ ++config MIPS_DISABLE_OBSOLETE_IDE ++ bool ++ ++config SYNC_R4K ++ bool ++ ++config MIPS_MACHINE ++ def_bool n ++ ++config NO_IOPORT ++ def_bool n ++ ++config GENERIC_ISA_DMA ++ bool ++ select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n ++ select ISA_DMA_API ++ ++config GENERIC_ISA_DMA_SUPPORT_BROKEN ++ bool ++ select GENERIC_ISA_DMA ++ ++config ISA_DMA_API ++ bool ++ ++config GENERIC_GPIO ++ bool ++ ++config HOLES_IN_ZONE ++ bool ++ ++# ++# Endianness selection. Sufficiently obscure so many users don't know what to ++# answer,so we try hard to limit the available choices. Also the use of a ++# choice statement should be more obvious to the user. ++# ++choice ++ prompt "Endianness selection" ++ help ++ Some MIPS machines can be configured for either little or big endian ++ byte order. These modes require different kernels and a different ++ Linux distribution. In general there is one preferred byteorder for a ++ particular system but some systems are just as commonly used in the ++ one or the other endianness. ++ ++config CPU_BIG_ENDIAN ++ bool "Big endian" ++ depends on SYS_SUPPORTS_BIG_ENDIAN ++ ++config CPU_LITTLE_ENDIAN ++ bool "Little endian" ++ depends on SYS_SUPPORTS_LITTLE_ENDIAN ++ help ++ ++endchoice ++ ++config EXPORT_UASM ++ bool ++ ++config SYS_SUPPORTS_APM_EMULATION ++ bool ++ ++config SYS_SUPPORTS_BIG_ENDIAN ++ bool ++ ++config SYS_SUPPORTS_LITTLE_ENDIAN ++ bool ++ ++config SYS_SUPPORTS_HUGETLBFS ++ bool ++ depends on CPU_SUPPORTS_HUGEPAGES && 64BIT ++ default y ++ ++config MIPS_HUGE_TLB_SUPPORT ++ def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE ++ ++config IRQ_CPU ++ bool ++ ++config IRQ_CPU_RM7K ++ bool ++ ++config IRQ_MSP_SLP ++ bool ++ ++config IRQ_MSP_CIC ++ bool ++ ++config IRQ_TXX9 ++ bool ++ ++config IRQ_GT641XX ++ bool ++ ++config IRQ_GIC ++ bool ++ ++config MIPS_BOARDS_GEN ++ bool ++ ++config PCI_GT64XXX_PCI0 ++ bool ++ ++config NO_EXCEPT_FILL ++ bool ++ ++config SOC_EMMA2RH ++ bool ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_R5500 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ ++config SOC_PNX833X ++ bool ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select DMA_NONCOHERENT ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select GENERIC_GPIO ++ select CPU_MIPSR2_IRQ_VI ++ ++config SOC_PNX8335 ++ bool ++ select SOC_PNX833X ++ ++config SWAP_IO_SPACE ++ bool ++ ++config SGI_HAS_INDYDOG ++ bool ++ ++config SGI_HAS_HAL2 ++ bool ++ ++config SGI_HAS_SEEQ ++ bool ++ ++config SGI_HAS_WD93 ++ bool ++ ++config SGI_HAS_ZILOG ++ bool ++ ++config SGI_HAS_I8042 ++ bool ++ ++config DEFAULT_SGI_PARTITION ++ bool ++ ++config FW_ARC32 ++ bool ++ ++config FW_SNIPROM ++ bool ++ ++config BOOT_ELF32 ++ bool ++ ++config MIPS_L1_CACHE_SHIFT ++ int ++ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL ++ default "6" if MIPS_CPU_SCACHE ++ default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON ++ default "5" ++ ++config HAVE_STD_PC_SERIAL_PORT ++ bool ++ ++config ARC_CONSOLE ++ bool "ARC console support" ++ depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) ++ ++config ARC_MEMORY ++ bool ++ depends on MACH_JAZZ || SNI_RM || SGI_IP32 ++ default y ++ ++config ARC_PROMLIB ++ bool ++ depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 ++ default y ++ ++config FW_ARC64 ++ bool ++ ++config BOOT_ELF64 ++ bool ++ ++menu "CPU selection" ++ ++choice ++ prompt "CPU type" ++ default CPU_R4X00 ++ ++config CPU_LOONGSON2E ++ bool "Loongson 2E" ++ depends on SYS_HAS_CPU_LOONGSON2E ++ select CPU_LOONGSON2 ++ help ++ The Loongson 2E processor implements the MIPS III instruction set ++ with many extensions. ++ ++ It has an internal FPGA northbridge, which is compatible to ++ bonito64. ++ ++config CPU_LOONGSON2F ++ bool "Loongson 2F" ++ depends on SYS_HAS_CPU_LOONGSON2F ++ select CPU_LOONGSON2 ++ select GENERIC_GPIO ++ select ARCH_REQUIRE_GPIOLIB ++ help ++ The Loongson 2F processor implements the MIPS III instruction set ++ with many extensions. ++ ++ Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller ++ have a similar programming interface with FPGA northbridge used in ++ Loongson2E. ++ ++config CPU_LOONGSON1B ++ bool "Loongson 1B" ++ depends on SYS_HAS_CPU_LOONGSON1B ++ select CPU_LOONGSON1 ++ help ++ The Loongson 1B is a 32-bit SoC, which implements the MIPS32 ++ release 2 instruction set. ++ ++config CPU_MIPS32_R1 ++ bool "MIPS32 Release 1" ++ depends on SYS_HAS_CPU_MIPS32_R1 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ help ++ Choose this option to build a kernel for release 1 or later of the ++ MIPS32 architecture. Most modern embedded systems with a 32-bit ++ MIPS processor are based on a MIPS32 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. ++ Release 2 of the MIPS32 architecture is available since several ++ years so chances are you even have a MIPS32 Release 2 processor ++ in which case you should choose CPU_MIPS32_R2 instead for better ++ performance. ++ ++config CPU_MIPS32_R2 ++ bool "MIPS32 Release 2" ++ depends on SYS_HAS_CPU_MIPS32_R2 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ help ++ Choose this option to build a kernel for release 2 or later of the ++ MIPS32 architecture. Most modern embedded systems with a 32-bit ++ MIPS processor are based on a MIPS32 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. ++ ++config CPU_MIPS64_R1 ++ bool "MIPS64 Release 1" ++ depends on SYS_HAS_CPU_MIPS64_R1 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ Choose this option to build a kernel for release 1 or later of the ++ MIPS64 architecture. Many modern embedded systems with a 64-bit ++ MIPS processor are based on a MIPS64 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. ++ Release 2 of the MIPS64 architecture is available since several ++ years so chances are you even have a MIPS64 Release 2 processor ++ in which case you should choose CPU_MIPS64_R2 instead for better ++ performance. ++ ++config CPU_MIPS64_R2 ++ bool "MIPS64 Release 2" ++ depends on SYS_HAS_CPU_MIPS64_R2 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ Choose this option to build a kernel for release 2 or later of the ++ MIPS64 architecture. Many modern embedded systems with a 64-bit ++ MIPS processor are based on a MIPS64 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. ++ ++config CPU_R3000 ++ bool "R3000" ++ depends on SYS_HAS_CPU_R3000 ++ select CPU_HAS_WB ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ help ++ Please make sure to pick the right CPU type. Linux/MIPS is not ++ designed to be generic, i.e. Kernels compiled for R3000 CPUs will ++ *not* work on R4000 machines and vice versa. However, since most ++ of the supported machines have an R4000 (or similar) CPU, R4x00 ++ might be a safe bet. If the resulting kernel does not work, ++ try to recompile with R3000. ++ ++config CPU_TX39XX ++ bool "R39XX" ++ depends on SYS_HAS_CPU_TX39XX ++ select CPU_SUPPORTS_32BIT_KERNEL ++ ++config CPU_VR41XX ++ bool "R41xx" ++ depends on SYS_HAS_CPU_VR41XX ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ The options selects support for the NEC VR4100 series of processors. ++ Only choose this option if you have one of these processors as a ++ kernel built with this option will not run on any other type of ++ processor or vice versa. ++ ++config CPU_R4300 ++ bool "R4300" ++ depends on SYS_HAS_CPU_R4300 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ MIPS Technologies R4300-series processors. ++ ++config CPU_R4X00 ++ bool "R4x00" ++ depends on SYS_HAS_CPU_R4X00 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ MIPS Technologies R4000-series processors other than 4300, including ++ the R4000, R4400, R4600, and 4700. ++ ++config CPU_TX49XX ++ bool "R49XX" ++ depends on SYS_HAS_CPU_TX49XX ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HUGEPAGES ++ ++config CPU_R5000 ++ bool "R5000" ++ depends on SYS_HAS_CPU_R5000 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ MIPS Technologies R5000-series processors other than the Nevada. ++ ++config CPU_R5432 ++ bool "R5432" ++ depends on SYS_HAS_CPU_R5432 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HUGEPAGES ++ ++config CPU_R5500 ++ bool "R5500" ++ depends on SYS_HAS_CPU_R5500 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV ++ instruction set. ++ ++config CPU_R6000 ++ bool "R6000" ++ depends on SYS_HAS_CPU_R6000 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ help ++ MIPS Technologies R6000 and R6000A series processors. Note these ++ processors are extremely rare and the support for them is incomplete. ++ ++config CPU_NEVADA ++ bool "RM52xx" ++ depends on SYS_HAS_CPU_NEVADA ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ QED / PMC-Sierra RM52xx-series ("Nevada") processors. ++ ++config CPU_R8000 ++ bool "R8000" ++ depends on SYS_HAS_CPU_R8000 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ MIPS Technologies R8000 processors. Note these processors are ++ uncommon and the support for them is incomplete. ++ ++config CPU_R10000 ++ bool "R10000" ++ depends on SYS_HAS_CPU_R10000 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ MIPS Technologies R10000-series processors. ++ ++config CPU_RM7000 ++ bool "RM7000" ++ depends on SYS_HAS_CPU_RM7000 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ ++config CPU_SB1 ++ bool "SB1" ++ depends on SYS_HAS_CPU_SB1 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ select WEAK_ORDERING ++ ++config CPU_CAVIUM_OCTEON ++ bool "Cavium Octeon processor" ++ depends on SYS_HAS_CPU_CAVIUM_OCTEON ++ select ARCH_SPARSEMEM_ENABLE ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_SMP ++ select NR_CPUS_DEFAULT_16 ++ select WEAK_ORDERING ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ select LIBFDT ++ select USE_OF ++ help ++ The Cavium Octeon processor is a highly integrated chip containing ++ many ethernet hardware widgets for networking tasks. The processor ++ can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. ++ Full details can be found at http://www.caviumnetworks.com. ++ ++config CPU_BMIPS3300 ++ bool "BMIPS3300" ++ depends on SYS_HAS_CPU_BMIPS3300 ++ select CPU_BMIPS ++ help ++ Broadcom BMIPS3300 processors. ++ ++config CPU_BMIPS4350 ++ bool "BMIPS4350" ++ depends on SYS_HAS_CPU_BMIPS4350 ++ select CPU_BMIPS ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ help ++ Broadcom BMIPS4350 ("VIPER") processors. ++ ++config CPU_BMIPS4380 ++ bool "BMIPS4380" ++ depends on SYS_HAS_CPU_BMIPS4380 ++ select CPU_BMIPS ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ help ++ Broadcom BMIPS4380 processors. ++ ++config CPU_BMIPS5000 ++ bool "BMIPS5000" ++ depends on SYS_HAS_CPU_BMIPS5000 ++ select CPU_BMIPS ++ select CPU_SUPPORTS_HIGHMEM ++ select MIPS_CPU_SCACHE ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ help ++ Broadcom BMIPS5000 processors. ++ ++config CPU_XLR ++ bool "Netlogic XLR SoC" ++ depends on SYS_HAS_CPU_XLR ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ select WEAK_ORDERING ++ select WEAK_REORDERING_BEYOND_LLSC ++ help ++ Netlogic Microsystems XLR/XLS processors. ++ ++config CPU_XLP ++ bool "Netlogic XLP SoC" ++ depends on SYS_HAS_CPU_XLP ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select WEAK_ORDERING ++ select WEAK_REORDERING_BEYOND_LLSC ++ select CPU_HAS_PREFETCH ++ select CPU_MIPSR2 ++ help ++ Netlogic Microsystems XLP processors. ++endchoice ++ ++if CPU_LOONGSON2F ++config CPU_NOP_WORKAROUNDS ++ bool ++ ++config CPU_JUMP_WORKAROUNDS ++ bool ++ ++config CPU_LOONGSON2F_WORKAROUNDS ++ bool "Loongson 2F Workarounds" ++ default y ++ select CPU_NOP_WORKAROUNDS ++ select CPU_JUMP_WORKAROUNDS ++ help ++ Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which ++ require workarounds. Without workarounds the system may hang ++ unexpectedly. For more information please refer to the gas ++ -mfix-loongson2f-nop and -mfix-loongson2f-jump options. ++ ++ Loongson 2F03 and later have fixed these issues and no workarounds ++ are needed. The workarounds have no significant side effect on them ++ but may decrease the performance of the system so this option should ++ be disabled unless the kernel is intended to be run on 2F01 or 2F02 ++ systems. ++ ++ If unsure, please say Y. ++endif # CPU_LOONGSON2F ++ ++config SYS_SUPPORTS_ZBOOT ++ bool ++ select HAVE_KERNEL_GZIP ++ select HAVE_KERNEL_BZIP2 ++ select HAVE_KERNEL_LZMA ++ select HAVE_KERNEL_LZO ++ ++config SYS_SUPPORTS_ZBOOT_UART16550 ++ bool ++ select SYS_SUPPORTS_ZBOOT ++ ++config CPU_LOONGSON2 ++ bool ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ ++config CPU_LOONGSON1 ++ bool ++ select CPU_MIPS32 ++ select CPU_MIPSR2 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ ++config CPU_BMIPS ++ bool ++ select CPU_MIPS32 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select WEAK_ORDERING ++ ++config SYS_HAS_CPU_LOONGSON2E ++ bool ++ ++config SYS_HAS_CPU_LOONGSON2F ++ bool ++ select CPU_SUPPORTS_CPUFREQ ++ select CPU_SUPPORTS_ADDRWINCFG if 64BIT ++ select CPU_SUPPORTS_UNCACHED_ACCELERATED ++ ++config SYS_HAS_CPU_LOONGSON1B ++ bool ++ ++config SYS_HAS_CPU_MIPS32_R1 ++ bool ++ ++config SYS_HAS_CPU_MIPS32_R2 ++ bool ++ ++config SYS_HAS_CPU_MIPS64_R1 ++ bool ++ ++config SYS_HAS_CPU_MIPS64_R2 ++ bool ++ ++config SYS_HAS_CPU_R3000 ++ bool ++ ++config SYS_HAS_CPU_TX39XX ++ bool ++ ++config SYS_HAS_CPU_VR41XX ++ bool ++ ++config SYS_HAS_CPU_R4300 ++ bool ++ ++config SYS_HAS_CPU_R4X00 ++ bool ++ ++config SYS_HAS_CPU_TX49XX ++ bool ++ ++config SYS_HAS_CPU_R5000 ++ bool ++ ++config SYS_HAS_CPU_R5432 ++ bool ++ ++config SYS_HAS_CPU_R5500 ++ bool ++ ++config SYS_HAS_CPU_R6000 ++ bool ++ ++config SYS_HAS_CPU_NEVADA ++ bool ++ ++config SYS_HAS_CPU_R8000 ++ bool ++ ++config SYS_HAS_CPU_R10000 ++ bool ++ ++config SYS_HAS_CPU_RM7000 ++ bool ++ ++config SYS_HAS_CPU_SB1 ++ bool ++ ++config SYS_HAS_CPU_CAVIUM_OCTEON ++ bool ++ ++config SYS_HAS_CPU_BMIPS3300 ++ bool ++ ++config SYS_HAS_CPU_BMIPS4350 ++ bool ++ ++config SYS_HAS_CPU_BMIPS4380 ++ bool ++ ++config SYS_HAS_CPU_BMIPS5000 ++ bool ++ ++config SYS_HAS_CPU_XLR ++ bool ++ ++config SYS_HAS_CPU_XLP ++ bool ++ ++# ++# CPU may reorder R->R, R->W, W->R, W->W ++# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC ++# ++config WEAK_ORDERING ++ bool ++ ++# ++# CPU may reorder reads and writes beyond LL/SC ++# CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC ++# ++config WEAK_REORDERING_BEYOND_LLSC ++ bool ++endmenu ++ ++# ++# These two indicate any level of the MIPS32 and MIPS64 architecture ++# ++config CPU_MIPS32 ++ bool ++ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 ++ ++config CPU_MIPS64 ++ bool ++ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 ++ ++# ++# These two indicate the revision of the architecture, either Release 1 or Release 2 ++# ++config CPU_MIPSR1 ++ bool ++ default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 ++ ++config CPU_MIPSR2 ++ bool ++ default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON ++ ++config SYS_SUPPORTS_32BIT_KERNEL ++ bool ++config SYS_SUPPORTS_64BIT_KERNEL ++ bool ++config CPU_SUPPORTS_32BIT_KERNEL ++ bool ++config CPU_SUPPORTS_64BIT_KERNEL ++ bool ++config CPU_SUPPORTS_CPUFREQ ++ bool ++config CPU_SUPPORTS_ADDRWINCFG ++ bool ++config CPU_SUPPORTS_HUGEPAGES ++ bool ++config CPU_SUPPORTS_UNCACHED_ACCELERATED ++ bool ++config MIPS_PGD_C0_CONTEXT ++ bool ++ default y if 64BIT && CPU_MIPSR2 && !CPU_XLP ++ ++# ++# Set to y for ptrace access to watch registers. ++# ++config HARDWARE_WATCHPOINTS ++ bool ++ default y if CPU_MIPSR1 || CPU_MIPSR2 ++ ++menu "Kernel type" ++ ++choice ++ prompt "Kernel code model" ++ help ++ You should only select this option if you have a workload that ++ actually benefits from 64-bit processing or if your machine has ++ large memory. You will only be presented a single option in this ++ menu if your system does not support both 32-bit and 64-bit kernels. ++ ++config 32BIT ++ bool "32-bit kernel" ++ depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL ++ select TRAD_SIGNALS ++ help ++ Select this option if you want to build a 32-bit kernel. ++config 64BIT ++ bool "64-bit kernel" ++ depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL ++ select HAVE_SYSCALL_WRAPPERS ++ help ++ Select this option if you want to build a 64-bit kernel. ++ ++endchoice ++ ++choice ++ prompt "Kernel page size" ++ default PAGE_SIZE_4KB ++ ++config PAGE_SIZE_4KB ++ bool "4kB" ++ depends on !CPU_LOONGSON2 ++ help ++ This option select the standard 4kB Linux page size. On some ++ R3000-family processors this is the only available page size. Using ++ 4kB page size will minimize memory consumption and is therefore ++ recommended for low memory systems. ++ ++config PAGE_SIZE_8KB ++ bool "8kB" ++ depends on CPU_R8000 || CPU_CAVIUM_OCTEON ++ help ++ Using 8kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available ++ only on R8000 and cnMIPS processors. Note that you will need a ++ suitable Linux distribution to support this. ++ ++config PAGE_SIZE_16KB ++ bool "16kB" ++ depends on !CPU_R3000 && !CPU_TX39XX ++ help ++ Using 16kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available on ++ all non-R3000 family processors. Note that you will need a suitable ++ Linux distribution to support this. ++ ++config PAGE_SIZE_32KB ++ bool "32kB" ++ depends on CPU_CAVIUM_OCTEON ++ help ++ Using 32kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available ++ only on cnMIPS cores. Note that you will need a suitable Linux ++ distribution to support this. ++ ++config PAGE_SIZE_64KB ++ bool "64kB" ++ depends on !CPU_R3000 && !CPU_TX39XX ++ help ++ Using 64kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available on ++ all non-R3000 family processor. Not that at the time of this ++ writing this option is still high experimental. ++ ++endchoice ++ ++config FORCE_MAX_ZONEORDER ++ int "Maximum zone order" ++ range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB ++ default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB ++ range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB ++ default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB ++ range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB ++ default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB ++ range 11 64 ++ default "11" ++ help ++ The kernel memory allocator divides physically contiguous memory ++ blocks into "zones", where each zone is a power of two number of ++ pages. This option selects the largest power of two that the kernel ++ keeps in the memory allocator. If you need to allocate very large ++ blocks of physically contiguous memory, then you may need to ++ increase this value. ++ ++ This config option is actually maximum order plus one. For example, ++ a value of 11 means that the largest free memory block is 2^10 pages. ++ ++ The page size is not necessarily 4KB. Keep this in mind ++ when choosing a value for this option. ++ ++config BOARD_SCACHE ++ bool ++ ++config IP22_CPU_SCACHE ++ bool ++ select BOARD_SCACHE ++ ++# ++# Support for a MIPS32 / MIPS64 style S-caches ++# ++config MIPS_CPU_SCACHE ++ bool ++ select BOARD_SCACHE ++ ++config R5000_CPU_SCACHE ++ bool ++ select BOARD_SCACHE ++ ++config RM7000_CPU_SCACHE ++ bool ++ select BOARD_SCACHE ++ ++config SIBYTE_DMA_PAGEOPS ++ bool "Use DMA to clear/copy pages" ++ depends on CPU_SB1 ++ help ++ Instead of using the CPU to zero and copy pages, use a Data Mover ++ channel. These DMA channels are otherwise unused by the standard ++ SiByte Linux port. Seems to give a small performance benefit. ++ ++config CPU_HAS_PREFETCH ++ bool ++ ++config CPU_GENERIC_DUMP_TLB ++ bool ++ default y if !(CPU_R3000 || CPU_R6000 || CPU_R8000 || CPU_TX39XX) ++ ++config CPU_R4K_FPU ++ bool ++ default y if !(CPU_R3000 || CPU_R6000 || CPU_TX39XX || CPU_CAVIUM_OCTEON) ++ ++config CPU_R4K_CACHE_TLB ++ bool ++ default y if !(CPU_R3000 || CPU_R8000 || CPU_SB1 || CPU_TX39XX || CPU_CAVIUM_OCTEON) ++ ++choice ++ prompt "MIPS MT options" ++ ++config MIPS_MT_DISABLED ++ bool "Disable multithreading support." ++ help ++ Use this option if your workload can't take advantage of ++ MIPS hardware multithreading support. On systems that don't have ++ the option of an MT-enabled processor this option will be the only ++ option in this menu. ++ ++config MIPS_MT_SMP ++ bool "Use 1 TC on each available VPE for SMP" ++ depends on SYS_SUPPORTS_MULTITHREADING ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select MIPS_MT ++ select NR_CPUS_DEFAULT_2 ++ select SMP ++ select SYS_SUPPORTS_SCHED_SMT if SMP ++ select SYS_SUPPORTS_SMP ++ select SMP_UP ++ select MIPS_PERF_SHARED_TC_COUNTERS ++ help ++ This is a kernel model which is known a VSMP but lately has been ++ marketesed into SMVP. ++ Virtual SMP uses the processor's VPEs to implement virtual ++ processors. In currently available configuration of the 34K processor ++ this allows for a dual processor. Both processors will share the same ++ primary caches; each will obtain the half of the TLB for it's own ++ exclusive use. For a layman this model can be described as similar to ++ what Intel calls Hyperthreading. ++ ++ For further information see http://www.linux-mips.org/wiki/34K#VSMP ++ ++config MIPS_MT_SMTC ++ bool "SMTC: Use all TCs on all VPEs for SMP" ++ depends on CPU_MIPS32_R2 ++ #depends on CPU_MIPS64_R2 # once there is hardware ... ++ depends on SYS_SUPPORTS_MULTITHREADING ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select MIPS_MT ++ select NR_CPUS_DEFAULT_8 ++ select SMP ++ select SYS_SUPPORTS_SMP ++ select SMP_UP ++ help ++ This is a kernel model which is known a SMTC or lately has been ++ marketesed into SMVP. ++ is presenting the available TC's of the core as processors to Linux. ++ On currently available 34K processors this means a Linux system will ++ see up to 5 processors. The implementation of the SMTC kernel differs ++ significantly from VSMP and cannot efficiently coexist in the same ++ kernel binary so the choice between VSMP and SMTC is a compile time ++ decision. ++ ++ For further information see http://www.linux-mips.org/wiki/34K#SMTC ++ ++endchoice ++ ++config MIPS_MT ++ bool ++ ++config SCHED_SMT ++ bool "SMT (multithreading) scheduler support" ++ depends on SYS_SUPPORTS_SCHED_SMT ++ default n ++ help ++ SMT scheduler support improves the CPU scheduler's decision making ++ when dealing with MIPS MT enabled cores at a cost of slightly ++ increased overhead in some places. If unsure say N here. ++ ++config SYS_SUPPORTS_SCHED_SMT ++ bool ++ ++config SYS_SUPPORTS_MULTITHREADING ++ bool ++ ++config MIPS_MT_FPAFF ++ bool "Dynamic FPU affinity for FP-intensive threads" ++ default y ++ depends on MIPS_MT_SMP || MIPS_MT_SMTC ++ ++config MIPS_VPE_LOADER ++ bool "VPE loader support." ++ depends on SYS_SUPPORTS_MULTITHREADING ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select MIPS_MT ++ help ++ Includes a loader for loading an elf relocatable object ++ onto another VPE and running it. ++ ++config MIPS_MT_SMTC_IM_BACKSTOP ++ bool "Use per-TC register bits as backstop for inhibited IM bits" ++ depends on MIPS_MT_SMTC ++ default n ++ help ++ To support multiple TC microthreads acting as "CPUs" within ++ a VPE, VPE-wide interrupt mask bits must be specially manipulated ++ during interrupt handling. To support legacy drivers and interrupt ++ controller management code, SMTC has a "backstop" to track and ++ if necessary restore the interrupt mask. This has some performance ++ impact on interrupt service overhead. ++ ++config MIPS_MT_SMTC_IRQAFF ++ bool "Support IRQ affinity API" ++ depends on MIPS_MT_SMTC ++ default n ++ help ++ Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) ++ for SMTC Linux kernel. Requires platform support, of which ++ an example can be found in the MIPS kernel i8259 and Malta ++ platform code. Adds some overhead to interrupt dispatch, and ++ should be used only if you know what you are doing. ++ ++config MIPS_VPE_LOADER_TOM ++ bool "Load VPE program into memory hidden from linux" ++ depends on MIPS_VPE_LOADER ++ default y ++ help ++ The loader can use memory that is present but has been hidden from ++ Linux using the kernel command line option "mem=xxMB". It's up to ++ you to ensure the amount you put in the option and the space your ++ program requires is less or equal to the amount physically present. ++ ++# this should possibly be in drivers/char, but it is rather cpu related. Hmmm ++config MIPS_VPE_APSP_API ++ bool "Enable support for AP/SP API (RTLX)" ++ depends on MIPS_VPE_LOADER ++ help ++ ++config MIPS_CMP ++ bool "MIPS CMP framework support" ++ depends on SYS_SUPPORTS_MIPS_CMP ++ select SYNC_R4K ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_SCHED_SMT if SMP ++ select WEAK_ORDERING ++ default n ++ help ++ This is a placeholder option for the GCMP work. It will need to ++ be handled differently... ++ ++config SB1_PASS_1_WORKAROUNDS ++ bool ++ depends on CPU_SB1_PASS_1 ++ default y ++ ++config SB1_PASS_2_WORKAROUNDS ++ bool ++ depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) ++ default y ++ ++config SB1_PASS_2_1_WORKAROUNDS ++ bool ++ depends on CPU_SB1 && CPU_SB1_PASS_2 ++ default y ++ ++config 64BIT_PHYS_ADDR ++ bool ++ ++config ARCH_PHYS_ADDR_T_64BIT ++ def_bool 64BIT_PHYS_ADDR ++ ++config CPU_HAS_SMARTMIPS ++ depends on SYS_SUPPORTS_SMARTMIPS ++ bool "Support for the SmartMIPS ASE" ++ help ++ SmartMIPS is a extension of the MIPS32 architecture aimed at ++ increased security at both hardware and software level for ++ smartcards. Enabling this option will allow proper use of the ++ SmartMIPS instructions by Linux applications. However a kernel with ++ this option will not work on a MIPS core without SmartMIPS core. If ++ you don't know you probably don't have SmartMIPS and should say N ++ here. ++ ++config CPU_HAS_WB ++ bool ++ ++config XKS01 ++ bool ++ ++# ++# Vectored interrupt mode is an R2 feature ++# ++config CPU_MIPSR2_IRQ_VI ++ bool ++ ++# ++# Extended interrupt mode is an R2 feature ++# ++config CPU_MIPSR2_IRQ_EI ++ bool ++ ++config CPU_HAS_SYNC ++ bool ++ depends on !CPU_R3000 ++ default y ++ ++# ++# CPU non-features ++# ++config CPU_DADDI_WORKAROUNDS ++ bool ++ ++config CPU_R4000_WORKAROUNDS ++ bool ++ select CPU_R4400_WORKAROUNDS ++ ++config CPU_R4400_WORKAROUNDS ++ bool ++ ++# ++# - Highmem only makes sense for the 32-bit kernel. ++# - The current highmem code will only work properly on physically indexed ++# caches such as R3000, SB1, R7000 or those that look like they're virtually ++# indexed such as R4000/R4400 SC and MC versions or R10000. So for the ++# moment we protect the user and offer the highmem option only on machines ++# where it's known to be safe. This will not offer highmem on a few systems ++# such as MIPS32 and MIPS64 CPUs which may have virtual and physically ++# indexed CPUs but we're playing safe. ++# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we ++# know they might have memory configurations that could make use of highmem ++# support. ++# ++config HIGHMEM ++ bool "High Memory Support" ++ depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM ++ ++config CPU_SUPPORTS_HIGHMEM ++ bool ++ ++config SYS_SUPPORTS_HIGHMEM ++ bool ++ ++config SYS_SUPPORTS_SMARTMIPS ++ bool ++ ++config ARCH_FLATMEM_ENABLE ++ def_bool y ++ depends on !NUMA && !CPU_LOONGSON2 ++ ++config ARCH_DISCONTIGMEM_ENABLE ++ bool ++ default y if SGI_IP27 ++ help ++ Say Y to support efficient handling of discontiguous physical memory, ++ for architectures which are either NUMA (Non-Uniform Memory Access) ++ or have huge holes in the physical address space for other reasons. ++ See for more. ++ ++config ARCH_SPARSEMEM_ENABLE ++ bool ++ select SPARSEMEM_STATIC ++ ++config NUMA ++ bool "NUMA Support" ++ depends on SYS_SUPPORTS_NUMA ++ help ++ Say Y to compile the kernel to support NUMA (Non-Uniform Memory ++ Access). This option improves performance on systems with more ++ than two nodes; on two node systems it is generally better to ++ leave it disabled; on single node systems disable this option ++ disabled. ++ ++config SYS_SUPPORTS_NUMA ++ bool ++ ++config NODES_SHIFT ++ int ++ default "6" ++ depends on NEED_MULTIPLE_NODES ++ ++config HW_PERF_EVENTS ++ bool "Enable hardware performance counter support for perf events" ++ depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP) ++ default y ++ help ++ Enable hardware performance counter support for perf events. If ++ disabled, perf events will use software events only. ++ ++source "mm/Kconfig" ++ ++config SMP ++ bool "Multi-Processing support" ++ depends on SYS_SUPPORTS_SMP ++ select USE_GENERIC_SMP_HELPERS ++ help ++ This enables support for systems with more than one CPU. If you have ++ a system with only one CPU, like most personal computers, say N. If ++ you have a system with more than one CPU, say Y. ++ ++ If you say N here, the kernel will run on single and multiprocessor ++ machines, but will use only one CPU of a multiprocessor machine. If ++ you say Y here, the kernel will run on many, but not all, ++ singleprocessor machines. On a singleprocessor machine, the kernel ++ will run faster if you say N here. ++ ++ People using multiprocessor machines who say Y here should also say ++ Y to "Enhanced Real Time Clock Support", below. ++ ++ See also the SMP-HOWTO available at ++ . ++ ++ If you don't know what to do here, say N. ++ ++config SMP_UP ++ bool ++ ++config SYS_SUPPORTS_MIPS_CMP ++ bool ++ ++config SYS_SUPPORTS_SMP ++ bool ++ ++config NR_CPUS_DEFAULT_1 ++ bool ++ ++config NR_CPUS_DEFAULT_2 ++ bool ++ ++config NR_CPUS_DEFAULT_4 ++ bool ++ ++config NR_CPUS_DEFAULT_8 ++ bool ++ ++config NR_CPUS_DEFAULT_16 ++ bool ++ ++config NR_CPUS_DEFAULT_32 ++ bool ++ ++config NR_CPUS_DEFAULT_64 ++ bool ++ ++config NR_CPUS ++ int "Maximum number of CPUs (2-64)" ++ range 1 64 if NR_CPUS_DEFAULT_1 ++ depends on SMP ++ default "1" if NR_CPUS_DEFAULT_1 ++ default "2" if NR_CPUS_DEFAULT_2 ++ default "4" if NR_CPUS_DEFAULT_4 ++ default "8" if NR_CPUS_DEFAULT_8 ++ default "16" if NR_CPUS_DEFAULT_16 ++ default "32" if NR_CPUS_DEFAULT_32 ++ default "64" if NR_CPUS_DEFAULT_64 ++ help ++ This allows you to specify the maximum number of CPUs which this ++ kernel will support. The maximum supported value is 32 for 32-bit ++ kernel and 64 for 64-bit kernels; the minimum value which makes ++ sense is 1 for Qemu (useful only for kernel debugging purposes) ++ and 2 for all others. ++ ++ This is purely to save memory - each supported CPU adds ++ approximately eight kilobytes to the kernel image. For best ++ performance should round up your number of processors to the next ++ power of two. ++ ++config MIPS_PERF_SHARED_TC_COUNTERS ++ bool ++ ++# ++# Timer Interrupt Frequency Configuration ++# ++ ++choice ++ prompt "Timer frequency" ++ default HZ_250 ++ help ++ Allows the configuration of the timer frequency. ++ ++ config HZ_48 ++ bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ ++ ++ config HZ_100 ++ bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ ++ ++ config HZ_128 ++ bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ ++ ++ config HZ_250 ++ bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ ++ ++ config HZ_256 ++ bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ ++ ++ config HZ_1000 ++ bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ ++ ++ config HZ_1024 ++ bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ ++ ++endchoice ++ ++config SYS_SUPPORTS_48HZ ++ bool ++ ++config SYS_SUPPORTS_100HZ ++ bool ++ ++config SYS_SUPPORTS_128HZ ++ bool ++ ++config SYS_SUPPORTS_250HZ ++ bool ++ ++config SYS_SUPPORTS_256HZ ++ bool ++ ++config SYS_SUPPORTS_1000HZ ++ bool ++ ++config SYS_SUPPORTS_1024HZ ++ bool ++ ++config SYS_SUPPORTS_ARBIT_HZ ++ bool ++ default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \ ++ !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \ ++ !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \ ++ !SYS_SUPPORTS_1024HZ ++ ++config HZ ++ int ++ default 48 if HZ_48 ++ default 100 if HZ_100 ++ default 128 if HZ_128 ++ default 250 if HZ_250 ++ default 256 if HZ_256 ++ default 1000 if HZ_1000 ++ default 1024 if HZ_1024 ++ ++source "kernel/Kconfig.preempt" ++ ++config KEXEC ++ bool "Kexec system call" ++ help ++ kexec is a system call that implements the ability to shutdown your ++ current kernel, and to start another kernel. It is like a reboot ++ but it is independent of the system firmware. And like a reboot ++ you can start any kernel with it, not just Linux. ++ ++ The name comes from the similarity to the exec system call. ++ ++ It is an ongoing process to be certain the hardware in a machine ++ is properly shutdown, so do not be surprised if this code does not ++ initially work for you. It may help to enable device hotplugging ++ support. As of this writing the exact hardware interface is ++ strongly in flux, so no good recommendation can be made. ++ ++config CRASH_DUMP ++ bool "Kernel crash dumps" ++ help ++ Generate crash dump after being started by kexec. ++ This should be normally only set in special crash dump kernels ++ which are loaded in the main kernel with kexec-tools into ++ a specially reserved region and then later executed after ++ a crash by kdump/kexec. The crash dump kernel must be compiled ++ to a memory address not used by the main kernel or firmware using ++ PHYSICAL_START. ++ ++config PHYSICAL_START ++ hex "Physical address where the kernel is loaded" ++ default "0xffffffff84000000" if 64BIT ++ default "0x84000000" if 32BIT ++ depends on CRASH_DUMP ++ help ++ This gives the CKSEG0 or KSEG0 address where the kernel is loaded. ++ If you plan to use kernel for capturing the crash dump change ++ this value to start of the reserved region (the "X" value as ++ specified in the "crashkernel=YM@XM" command line boot parameter ++ passed to the panic-ed kernel). ++ ++config SECCOMP ++ bool "Enable seccomp to safely compute untrusted bytecode" ++ depends on PROC_FS ++ default y ++ help ++ This kernel feature is useful for number crunching applications ++ that may need to compute untrusted bytecode during their ++ execution. By using pipes or other transports made available to ++ the process as file descriptors supporting the read/write ++ syscalls, it's possible to isolate those applications in ++ their own address space using seccomp. Once seccomp is ++ enabled via /proc//seccomp, it cannot be disabled ++ and the task is only allowed to execute a few safe syscalls ++ defined by each seccomp mode. ++ ++ If unsure, say Y. Only embedded should say N here. ++ ++config USE_OF ++ bool ++ select OF ++ select OF_EARLY_FLATTREE ++ select IRQ_DOMAIN ++ ++endmenu ++ ++config LOCKDEP_SUPPORT ++ bool ++ default y ++ ++config STACKTRACE_SUPPORT ++ bool ++ default y ++ ++source "init/Kconfig" ++ ++source "kernel/Kconfig.freezer" ++ ++menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" ++ ++config HW_HAS_EISA ++ bool ++config HW_HAS_PCI ++ bool ++ ++config PCI ++ bool "Support for PCI controller" ++ depends on HW_HAS_PCI ++ select PCI_DOMAINS ++ select GENERIC_PCI_IOMAP ++ select NO_GENERIC_PCI_IOPORT_MAP ++ help ++ Find out whether you have a PCI motherboard. PCI is the name of a ++ bus system, i.e. the way the CPU talks to the other stuff inside ++ your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, ++ say Y, otherwise N. ++ ++config PCI_DOMAINS ++ bool ++ ++source "drivers/pci/Kconfig" ++ ++source "drivers/pci/pcie/Kconfig" ++ ++# ++# ISA support is now enabled via select. Too many systems still have the one ++# or other ISA chip on the board that users don't know about so don't expect ++# users to choose the right thing ... ++# ++config ISA ++ bool ++ ++config EISA ++ bool "EISA support" ++ depends on HW_HAS_EISA ++ select ISA ++ select GENERIC_ISA_DMA ++ ---help--- ++ The Extended Industry Standard Architecture (EISA) bus was ++ developed as an open alternative to the IBM MicroChannel bus. ++ ++ The EISA bus provided some of the features of the IBM MicroChannel ++ bus while maintaining backward compatibility with cards made for ++ the older ISA bus. The EISA bus saw limited use between 1988 and ++ 1995 when it was made obsolete by the PCI bus. ++ ++ Say Y here if you are building a kernel for an EISA-based machine. ++ ++ Otherwise, say N. ++ ++source "drivers/eisa/Kconfig" ++ ++config TC ++ bool "TURBOchannel support" ++ depends on MACH_DECSTATION ++ help ++ TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS ++ processors. TURBOchannel programming specifications are available ++ at: ++ ++ and: ++ ++ Linux driver support status is documented at: ++ ++ ++config MMU ++ bool ++ default y ++ ++config I8253 ++ bool ++ select CLKSRC_I8253 ++ select CLKEVT_I8253 ++ select MIPS_EXTERNAL_TIMER ++ ++config ZONE_DMA32 ++ bool ++ ++source "drivers/pcmcia/Kconfig" ++ ++source "drivers/pci/hotplug/Kconfig" ++ ++config RAPIDIO ++ bool "RapidIO support" ++ depends on PCI ++ default n ++ help ++ If you say Y here, the kernel will include drivers and ++ infrastructure code to support RapidIO interconnect devices. ++ ++source "drivers/rapidio/Kconfig" ++ ++endmenu ++ ++menu "Executable file formats" ++ ++source "fs/Kconfig.binfmt" ++ ++config TRAD_SIGNALS ++ bool ++ ++config MIPS32_COMPAT ++ bool "Kernel support for Linux/MIPS 32-bit binary compatibility" ++ depends on 64BIT ++ help ++ Select this option if you want Linux/MIPS 32-bit binary ++ compatibility. Since all software available for Linux/MIPS is ++ currently 32-bit you should say Y here. ++ ++config COMPAT ++ bool ++ depends on MIPS32_COMPAT ++ select ARCH_WANT_OLD_COMPAT_IPC ++ default y ++ ++config SYSVIPC_COMPAT ++ bool ++ depends on COMPAT && SYSVIPC ++ default y ++ ++config MIPS32_O32 ++ bool "Kernel support for o32 binaries" ++ depends on MIPS32_COMPAT ++ help ++ Select this option if you want to run o32 binaries. These are pure ++ 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of ++ existing binaries are in this format. ++ ++ If unsure, say Y. ++ ++config MIPS32_N32 ++ bool "Kernel support for n32 binaries" ++ depends on MIPS32_COMPAT ++ help ++ Select this option if you want to run n32 binaries. These are ++ 64-bit binaries using 32-bit quantities for addressing and certain ++ data that would normally be 64-bit. They are used in special ++ cases. ++ ++ If unsure, say N. ++ ++config BINFMT_ELF32 ++ bool ++ default y if MIPS32_O32 || MIPS32_N32 ++ ++endmenu ++ ++menu "Power management options" ++ ++config ARCH_HIBERNATION_POSSIBLE ++ def_bool y ++ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP ++ ++config ARCH_SUSPEND_POSSIBLE ++ def_bool y ++ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP ++ ++source "kernel/power/Kconfig" ++ ++endmenu ++ ++source "arch/mips/kernel/cpufreq/Kconfig" ++ ++source "net/Kconfig" ++ ++source "drivers/Kconfig" ++ ++source "drivers/firmware/Kconfig" ++ ++source "fs/Kconfig" ++ ++source "arch/mips/Kconfig.debug" ++ ++source "security/Kconfig" ++ ++source "crypto/Kconfig" ++ ++source "lib/Kconfig" +diff -Nur linux-3.9.11.orig/arch/x86/Kconfig linux-3.9.11/arch/x86/Kconfig +--- linux-3.9.11.orig/arch/x86/Kconfig 2013-07-21 02:16:17.000000000 +0200 ++++ linux-3.9.11/arch/x86/Kconfig 2013-09-12 07:26:20.000000000 +0200 +@@ -99,7 +99,6 @@ select GENERIC_SMP_IDLE_THREAD + select ARCH_WANT_IPC_PARSE_VERSION if X86_32 select HAVE_ARCH_SECCOMP_FILTER - select BUILDTIME_EXTABLE_SORT select GENERIC_CMOS_UPDATE select CLOCKSOURCE_WATCHDOG select GENERIC_CLOCKEVENTS +diff -Nur linux-3.9.11.orig/arch/x86/Kconfig.orig linux-3.9.11/arch/x86/Kconfig.orig +--- linux-3.9.11.orig/arch/x86/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-3.9.11/arch/x86/Kconfig.orig 2013-07-21 02:16:17.000000000 +0200 +@@ -0,0 +1,2351 @@ ++# Select 32 or 64 bit ++config 64BIT ++ bool "64-bit kernel" if ARCH = "x86" ++ default ARCH != "i386" ++ ---help--- ++ Say yes to build a 64-bit kernel - formerly known as x86_64 ++ Say no to build a 32-bit kernel - formerly known as i386 ++ ++config X86_32 ++ def_bool y ++ depends on !64BIT ++ select CLKSRC_I8253 ++ select HAVE_UID16 ++ ++config X86_64 ++ def_bool y ++ depends on 64BIT ++ select X86_DEV_DMA_OPS ++ ++### Arch settings ++config X86 ++ def_bool y ++ select HAVE_AOUT if X86_32 ++ select HAVE_UNSTABLE_SCHED_CLOCK ++ select ARCH_SUPPORTS_NUMA_BALANCING ++ select ARCH_WANTS_PROT_NUMA_PROT_NONE ++ select HAVE_IDE ++ select HAVE_OPROFILE ++ select HAVE_PCSPKR_PLATFORM ++ select HAVE_PERF_EVENTS ++ select HAVE_IOREMAP_PROT ++ select HAVE_KPROBES ++ select HAVE_MEMBLOCK ++ select HAVE_MEMBLOCK_NODE_MAP ++ select ARCH_DISCARD_MEMBLOCK ++ select ARCH_WANT_OPTIONAL_GPIOLIB ++ select ARCH_WANT_FRAME_POINTERS ++ select HAVE_DMA_ATTRS ++ select HAVE_DMA_CONTIGUOUS if !SWIOTLB ++ select HAVE_KRETPROBES ++ select HAVE_OPTPROBES ++ select HAVE_KPROBES_ON_FTRACE ++ select HAVE_FTRACE_MCOUNT_RECORD ++ select HAVE_FENTRY if X86_64 ++ select HAVE_C_RECORDMCOUNT ++ select HAVE_DYNAMIC_FTRACE ++ select HAVE_DYNAMIC_FTRACE_WITH_REGS ++ select HAVE_FUNCTION_TRACER ++ select HAVE_FUNCTION_GRAPH_TRACER ++ select HAVE_FUNCTION_GRAPH_FP_TEST ++ select HAVE_FUNCTION_TRACE_MCOUNT_TEST ++ select HAVE_SYSCALL_TRACEPOINTS ++ select SYSCTL_EXCEPTION_TRACE ++ select HAVE_KVM ++ select HAVE_ARCH_KGDB ++ select HAVE_ARCH_TRACEHOOK ++ select HAVE_GENERIC_DMA_COHERENT if X86_32 ++ select HAVE_EFFICIENT_UNALIGNED_ACCESS ++ select USER_STACKTRACE_SUPPORT ++ select HAVE_REGS_AND_STACK_ACCESS_API ++ select HAVE_DMA_API_DEBUG ++ select HAVE_KERNEL_GZIP ++ select HAVE_KERNEL_BZIP2 ++ select HAVE_KERNEL_LZMA ++ select HAVE_KERNEL_XZ ++ select HAVE_KERNEL_LZO ++ select HAVE_HW_BREAKPOINT ++ select HAVE_MIXED_BREAKPOINTS_REGS ++ select PERF_EVENTS ++ select HAVE_PERF_EVENTS_NMI ++ select HAVE_PERF_REGS ++ select HAVE_PERF_USER_STACK_DUMP ++ select HAVE_DEBUG_KMEMLEAK ++ select ANON_INODES ++ select HAVE_ALIGNED_STRUCT_PAGE if SLUB ++ select HAVE_CMPXCHG_LOCAL ++ select HAVE_CMPXCHG_DOUBLE ++ select HAVE_ARCH_KMEMCHECK ++ select HAVE_USER_RETURN_NOTIFIER ++ select ARCH_BINFMT_ELF_RANDOMIZE_PIE ++ select HAVE_ARCH_JUMP_LABEL ++ select HAVE_TEXT_POKE_SMP ++ select HAVE_GENERIC_HARDIRQS ++ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE ++ select SPARSE_IRQ ++ select GENERIC_FIND_FIRST_BIT ++ select GENERIC_IRQ_PROBE ++ select GENERIC_PENDING_IRQ if SMP ++ select GENERIC_IRQ_SHOW ++ select GENERIC_CLOCKEVENTS_MIN_ADJUST ++ select IRQ_FORCED_THREADING ++ select USE_GENERIC_SMP_HELPERS if SMP ++ select HAVE_BPF_JIT if X86_64 ++ select HAVE_ARCH_TRANSPARENT_HUGEPAGE ++ select CLKEVT_I8253 ++ select ARCH_HAVE_NMI_SAFE_CMPXCHG ++ select GENERIC_IOMAP ++ select DCACHE_WORD_ACCESS ++ select GENERIC_SMP_IDLE_THREAD ++ select ARCH_WANT_IPC_PARSE_VERSION if X86_32 ++ select HAVE_ARCH_SECCOMP_FILTER ++ select BUILDTIME_EXTABLE_SORT ++ select GENERIC_CMOS_UPDATE ++ select CLOCKSOURCE_WATCHDOG ++ select GENERIC_CLOCKEVENTS ++ select ARCH_CLOCKSOURCE_DATA if X86_64 ++ select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) ++ select GENERIC_TIME_VSYSCALL if X86_64 ++ select KTIME_SCALAR if X86_32 ++ select GENERIC_STRNCPY_FROM_USER ++ select GENERIC_STRNLEN_USER ++ select HAVE_CONTEXT_TRACKING if X86_64 ++ select HAVE_IRQ_TIME_ACCOUNTING ++ select VIRT_TO_BUS ++ select MODULES_USE_ELF_REL if X86_32 ++ select MODULES_USE_ELF_RELA if X86_64 ++ select CLONE_BACKWARDS if X86_32 ++ select ARCH_USE_BUILTIN_BSWAP ++ select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION ++ select OLD_SIGACTION if X86_32 ++ select COMPAT_OLD_SIGACTION if IA32_EMULATION ++ ++config INSTRUCTION_DECODER ++ def_bool y ++ depends on KPROBES || PERF_EVENTS || UPROBES ++ ++config OUTPUT_FORMAT ++ string ++ default "elf32-i386" if X86_32 ++ default "elf64-x86-64" if X86_64 ++ ++config ARCH_DEFCONFIG ++ string ++ default "arch/x86/configs/i386_defconfig" if X86_32 ++ default "arch/x86/configs/x86_64_defconfig" if X86_64 ++ ++config LOCKDEP_SUPPORT ++ def_bool y ++ ++config STACKTRACE_SUPPORT ++ def_bool y ++ ++config HAVE_LATENCYTOP_SUPPORT ++ def_bool y ++ ++config MMU ++ def_bool y ++ ++config SBUS ++ bool ++ ++config NEED_DMA_MAP_STATE ++ def_bool y ++ depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG ++ ++config NEED_SG_DMA_LENGTH ++ def_bool y ++ ++config GENERIC_ISA_DMA ++ def_bool y ++ depends on ISA_DMA_API ++ ++config GENERIC_BUG ++ def_bool y ++ depends on BUG ++ select GENERIC_BUG_RELATIVE_POINTERS if X86_64 ++ ++config GENERIC_BUG_RELATIVE_POINTERS ++ bool ++ ++config GENERIC_HWEIGHT ++ def_bool y ++ ++config GENERIC_GPIO ++ bool ++ ++config ARCH_MAY_HAVE_PC_FDC ++ def_bool y ++ depends on ISA_DMA_API ++ ++config RWSEM_XCHGADD_ALGORITHM ++ def_bool y ++ ++config GENERIC_CALIBRATE_DELAY ++ def_bool y ++ ++config ARCH_HAS_CPU_RELAX ++ def_bool y ++ ++config ARCH_HAS_DEFAULT_IDLE ++ def_bool y ++ ++config ARCH_HAS_CACHE_LINE_SIZE ++ def_bool y ++ ++config ARCH_HAS_CPU_AUTOPROBE ++ def_bool y ++ ++config HAVE_SETUP_PER_CPU_AREA ++ def_bool y ++ ++config NEED_PER_CPU_EMBED_FIRST_CHUNK ++ def_bool y ++ ++config NEED_PER_CPU_PAGE_FIRST_CHUNK ++ def_bool y ++ ++config ARCH_HIBERNATION_POSSIBLE ++ def_bool y ++ ++config ARCH_SUSPEND_POSSIBLE ++ def_bool y ++ ++config ZONE_DMA32 ++ bool ++ default X86_64 ++ ++config AUDIT_ARCH ++ bool ++ default X86_64 ++ ++config ARCH_SUPPORTS_OPTIMIZED_INLINING ++ def_bool y ++ ++config ARCH_SUPPORTS_DEBUG_PAGEALLOC ++ def_bool y ++ ++config HAVE_INTEL_TXT ++ def_bool y ++ depends on INTEL_IOMMU && ACPI ++ ++config X86_32_SMP ++ def_bool y ++ depends on X86_32 && SMP ++ ++config X86_64_SMP ++ def_bool y ++ depends on X86_64 && SMP ++ ++config X86_HT ++ def_bool y ++ depends on SMP ++ ++config X86_32_LAZY_GS ++ def_bool y ++ depends on X86_32 && !CC_STACKPROTECTOR ++ ++config ARCH_HWEIGHT_CFLAGS ++ string ++ default "-fcall-saved-ecx -fcall-saved-edx" if X86_32 ++ default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64 ++ ++config ARCH_CPU_PROBE_RELEASE ++ def_bool y ++ depends on HOTPLUG_CPU ++ ++config ARCH_SUPPORTS_UPROBES ++ def_bool y ++ ++source "init/Kconfig" ++source "kernel/Kconfig.freezer" ++ ++menu "Processor type and features" ++ ++config ZONE_DMA ++ bool "DMA memory allocation support" if EXPERT ++ default y ++ help ++ DMA memory allocation support allows devices with less than 32-bit ++ addressing to allocate within the first 16MB of address space. ++ Disable if no such devices will be used. ++ ++ If unsure, say Y. ++ ++config SMP ++ bool "Symmetric multi-processing support" ++ ---help--- ++ This enables support for systems with more than one CPU. If you have ++ a system with only one CPU, like most personal computers, say N. If ++ you have a system with more than one CPU, say Y. ++ ++ If you say N here, the kernel will run on single and multiprocessor ++ machines, but will use only one CPU of a multiprocessor machine. If ++ you say Y here, the kernel will run on many, but not all, ++ singleprocessor machines. On a singleprocessor machine, the kernel ++ will run faster if you say N here. ++ ++ Note that if you say Y here and choose architecture "586" or ++ "Pentium" under "Processor family", the kernel will not work on 486 ++ architectures. Similarly, multiprocessor kernels for the "PPro" ++ architecture may not work on all Pentium based boards. ++ ++ People using multiprocessor machines who say Y here should also say ++ Y to "Enhanced Real Time Clock Support", below. The "Advanced Power ++ Management" code will be disabled if you say Y here. ++ ++ See also , ++ and the SMP-HOWTO available at ++ . ++ ++ If you don't know what to do here, say N. ++ ++config X86_X2APIC ++ bool "Support x2apic" ++ depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP ++ ---help--- ++ This enables x2apic support on CPUs that have this feature. ++ ++ This allows 32-bit apic IDs (so it can support very large systems), ++ and accesses the local apic via MSRs not via mmio. ++ ++ If you don't know what to do here, say N. ++ ++config X86_MPPARSE ++ bool "Enable MPS table" if ACPI || SFI ++ default y ++ depends on X86_LOCAL_APIC ++ ---help--- ++ For old smp systems that do not have proper acpi support. Newer systems ++ (esp with 64bit cpus) with acpi support, MADT and DSDT will override it ++ ++config X86_BIGSMP ++ bool "Support for big SMP systems with more than 8 CPUs" ++ depends on X86_32 && SMP ++ ---help--- ++ This option is needed for the systems that have more than 8 CPUs ++ ++config GOLDFISH ++ def_bool y ++ depends on X86_GOLDFISH ++ ++if X86_32 ++config X86_EXTENDED_PLATFORM ++ bool "Support for extended (non-PC) x86 platforms" ++ default y ++ ---help--- ++ If you disable this option then the kernel will only support ++ standard PC platforms. (which covers the vast majority of ++ systems out there.) ++ ++ If you enable this option then you'll be able to select support ++ for the following (non-PC) 32 bit x86 platforms: ++ AMD Elan ++ NUMAQ (IBM/Sequent) ++ RDC R-321x SoC ++ SGI 320/540 (Visual Workstation) ++ STA2X11-based (e.g. Northville) ++ Summit/EXA (IBM x440) ++ Unisys ES7000 IA32 series ++ Moorestown MID devices ++ ++ If you have one of these systems, or if you want to build a ++ generic distribution kernel, say Y here - otherwise say N. ++endif ++ ++if X86_64 ++config X86_EXTENDED_PLATFORM ++ bool "Support for extended (non-PC) x86 platforms" ++ default y ++ ---help--- ++ If you disable this option then the kernel will only support ++ standard PC platforms. (which covers the vast majority of ++ systems out there.) ++ ++ If you enable this option then you'll be able to select support ++ for the following (non-PC) 64 bit x86 platforms: ++ Numascale NumaChip ++ ScaleMP vSMP ++ SGI Ultraviolet ++ ++ If you have one of these systems, or if you want to build a ++ generic distribution kernel, say Y here - otherwise say N. ++endif ++# This is an alphabetically sorted list of 64 bit extended platforms ++# Please maintain the alphabetic order if and when there are additions ++config X86_NUMACHIP ++ bool "Numascale NumaChip" ++ depends on X86_64 ++ depends on X86_EXTENDED_PLATFORM ++ depends on NUMA ++ depends on SMP ++ depends on X86_X2APIC ++ depends on PCI_MMCONFIG ++ ---help--- ++ Adds support for Numascale NumaChip large-SMP systems. Needed to ++ enable more than ~168 cores. ++ If you don't have one of these, you should say N here. ++ ++config X86_VSMP ++ bool "ScaleMP vSMP" ++ select PARAVIRT_GUEST ++ select PARAVIRT ++ depends on X86_64 && PCI ++ depends on X86_EXTENDED_PLATFORM ++ depends on SMP ++ ---help--- ++ Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is ++ supposed to run on these EM64T-based machines. Only choose this option ++ if you have one of these machines. ++ ++config X86_UV ++ bool "SGI Ultraviolet" ++ depends on X86_64 ++ depends on X86_EXTENDED_PLATFORM ++ depends on NUMA ++ depends on X86_X2APIC ++ ---help--- ++ This option is needed in order to support SGI Ultraviolet systems. ++ If you don't have one of these, you should say N here. ++ ++# Following is an alphabetically sorted list of 32 bit extended platforms ++# Please maintain the alphabetic order if and when there are additions ++ ++config X86_GOLDFISH ++ bool "Goldfish (Virtual Platform)" ++ depends on X86_32 ++ ---help--- ++ Enable support for the Goldfish virtual platform used primarily ++ for Android development. Unless you are building for the Android ++ Goldfish emulator say N here. ++ ++config X86_INTEL_CE ++ bool "CE4100 TV platform" ++ depends on PCI ++ depends on PCI_GODIRECT ++ depends on X86_32 ++ depends on X86_EXTENDED_PLATFORM ++ select X86_REBOOTFIXUPS ++ select OF ++ select OF_EARLY_FLATTREE ++ select IRQ_DOMAIN ++ ---help--- ++ Select for the Intel CE media processor (CE4100) SOC. ++ This option compiles in support for the CE4100 SOC for settop ++ boxes and media devices. ++ ++config X86_WANT_INTEL_MID ++ bool "Intel MID platform support" ++ depends on X86_32 ++ depends on X86_EXTENDED_PLATFORM ++ ---help--- ++ Select to build a kernel capable of supporting Intel MID platform ++ systems which do not have the PCI legacy interfaces (Moorestown, ++ Medfield). If you are building for a PC class system say N here. ++ ++if X86_WANT_INTEL_MID ++ ++config X86_INTEL_MID ++ bool ++ ++config X86_MDFLD ++ bool "Medfield MID platform" ++ depends on PCI ++ depends on PCI_GOANY ++ depends on X86_IO_APIC ++ select X86_INTEL_MID ++ select SFI ++ select DW_APB_TIMER ++ select APB_TIMER ++ select I2C ++ select SPI ++ select INTEL_SCU_IPC ++ select X86_PLATFORM_DEVICES ++ select MFD_INTEL_MSIC ++ ---help--- ++ Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin ++ Internet Device(MID) platform. ++ Unlike standard x86 PCs, Medfield does not have many legacy devices ++ nor standard legacy replacement devices/features. e.g. Medfield does ++ not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. ++ ++endif ++ ++config X86_INTEL_LPSS ++ bool "Intel Low Power Subsystem Support" ++ depends on ACPI ++ select COMMON_CLK ++ ---help--- ++ Select to build support for Intel Low Power Subsystem such as ++ found on Intel Lynxpoint PCH. Selecting this option enables ++ things like clock tree (common clock framework) which are needed ++ by the LPSS peripheral drivers. ++ ++config X86_RDC321X ++ bool "RDC R-321x SoC" ++ depends on X86_32 ++ depends on X86_EXTENDED_PLATFORM ++ select M486 ++ select X86_REBOOTFIXUPS ++ ---help--- ++ This option is needed for RDC R-321x system-on-chip, also known ++ as R-8610-(G). ++ If you don't have one of these chips, you should say N here. ++ ++config X86_32_NON_STANDARD ++ bool "Support non-standard 32-bit SMP architectures" ++ depends on X86_32 && SMP ++ depends on X86_EXTENDED_PLATFORM ++ ---help--- ++ This option compiles in the NUMAQ, Summit, bigsmp, ES7000, ++ STA2X11, default subarchitectures. It is intended for a generic ++ binary kernel. If you select them all, kernel will probe it ++ one by one and will fallback to default. ++ ++# Alphabetically sorted list of Non standard 32 bit platforms ++ ++config X86_NUMAQ ++ bool "NUMAQ (IBM/Sequent)" ++ depends on X86_32_NON_STANDARD ++ depends on PCI ++ select NUMA ++ select X86_MPPARSE ++ ---help--- ++ This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) ++ NUMA multiquad box. This changes the way that processors are ++ bootstrapped, and uses Clustered Logical APIC addressing mode instead ++ of Flat Logical. You will need a new lynxer.elf file to flash your ++ firmware with - send email to . ++ ++config X86_SUPPORTS_MEMORY_FAILURE ++ def_bool y ++ # MCE code calls memory_failure(): ++ depends on X86_MCE ++ # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: ++ depends on !X86_NUMAQ ++ # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: ++ depends on X86_64 || !SPARSEMEM ++ select ARCH_SUPPORTS_MEMORY_FAILURE ++ ++config X86_VISWS ++ bool "SGI 320/540 (Visual Workstation)" ++ depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT ++ depends on X86_32_NON_STANDARD ++ ---help--- ++ The SGI Visual Workstation series is an IA32-based workstation ++ based on SGI systems chips with some legacy PC hardware attached. ++ ++ Say Y here to create a kernel to run on the SGI 320 or 540. ++ ++ A kernel compiled for the Visual Workstation will run on general ++ PCs as well. See for details. ++ ++config STA2X11 ++ bool "STA2X11 Companion Chip Support" ++ depends on X86_32_NON_STANDARD && PCI ++ select X86_DEV_DMA_OPS ++ select X86_DMA_REMAP ++ select SWIOTLB ++ select MFD_STA2X11 ++ select ARCH_REQUIRE_GPIOLIB ++ default n ++ ---help--- ++ This adds support for boards based on the STA2X11 IO-Hub, ++ a.k.a. "ConneXt". The chip is used in place of the standard ++ PC chipset, so all "standard" peripherals are missing. If this ++ option is selected the kernel will still be able to boot on ++ standard PC machines. ++ ++config X86_SUMMIT ++ bool "Summit/EXA (IBM x440)" ++ depends on X86_32_NON_STANDARD ++ ---help--- ++ This option is needed for IBM systems that use the Summit/EXA chipset. ++ In particular, it is needed for the x440. ++ ++config X86_ES7000 ++ bool "Unisys ES7000 IA32 series" ++ depends on X86_32_NON_STANDARD && X86_BIGSMP ++ ---help--- ++ Support for Unisys ES7000 systems. Say 'Y' here if this kernel is ++ supposed to run on an IA32-based Unisys ES7000 system. ++ ++config X86_32_IRIS ++ tristate "Eurobraille/Iris poweroff module" ++ depends on X86_32 ++ ---help--- ++ The Iris machines from EuroBraille do not have APM or ACPI support ++ to shut themselves down properly. A special I/O sequence is ++ needed to do so, which is what this module does at ++ kernel shutdown. ++ ++ This is only for Iris machines from EuroBraille. ++ ++ If unused, say N. ++ ++config SCHED_OMIT_FRAME_POINTER ++ def_bool y ++ prompt "Single-depth WCHAN output" ++ depends on X86 ++ ---help--- ++ Calculate simpler /proc//wchan values. If this option ++ is disabled then wchan values will recurse back to the ++ caller function. This provides more accurate wchan values, ++ at the expense of slightly more scheduling overhead. ++ ++ If in doubt, say "Y". ++ ++menuconfig PARAVIRT_GUEST ++ bool "Paravirtualized guest support" ++ ---help--- ++ Say Y here to get to see options related to running Linux under ++ various hypervisors. This option alone does not add any kernel code. ++ ++ If you say N, all options in this submenu will be skipped and disabled. ++ ++if PARAVIRT_GUEST ++ ++config PARAVIRT_TIME_ACCOUNTING ++ bool "Paravirtual steal time accounting" ++ select PARAVIRT ++ default n ++ ---help--- ++ Select this option to enable fine granularity task steal time ++ accounting. Time spent executing other tasks in parallel with ++ the current vCPU is discounted from the vCPU power. To account for ++ that, there can be a small performance impact. ++ ++ If in doubt, say N here. ++ ++source "arch/x86/xen/Kconfig" ++ ++config KVM_GUEST ++ bool "KVM Guest support (including kvmclock)" ++ select PARAVIRT ++ select PARAVIRT ++ select PARAVIRT_CLOCK ++ default y if PARAVIRT_GUEST ++ ---help--- ++ This option enables various optimizations for running under the KVM ++ hypervisor. It includes a paravirtualized clock, so that instead ++ of relying on a PIT (or probably other) emulation by the ++ underlying device model, the host provides the guest with ++ timing infrastructure such as time of day, and system time ++ ++source "arch/x86/lguest/Kconfig" ++ ++config PARAVIRT ++ bool "Enable paravirtualization code" ++ ---help--- ++ This changes the kernel so it can modify itself when it is run ++ under a hypervisor, potentially improving performance significantly ++ over full virtualization. However, when run without a hypervisor ++ the kernel is theoretically slower and slightly larger. ++ ++config PARAVIRT_SPINLOCKS ++ bool "Paravirtualization layer for spinlocks" ++ depends on PARAVIRT && SMP ++ ---help--- ++ Paravirtualized spinlocks allow a pvops backend to replace the ++ spinlock implementation with something virtualization-friendly ++ (for example, block the virtual CPU rather than spinning). ++ ++ Unfortunately the downside is an up to 5% performance hit on ++ native kernels, with various workloads. ++ ++ If you are unsure how to answer this question, answer N. ++ ++config PARAVIRT_CLOCK ++ bool ++ ++endif ++ ++config PARAVIRT_DEBUG ++ bool "paravirt-ops debugging" ++ depends on PARAVIRT && DEBUG_KERNEL ++ ---help--- ++ Enable to debug paravirt_ops internals. Specifically, BUG if ++ a paravirt_op is missing when it is called. ++ ++config NO_BOOTMEM ++ def_bool y ++ ++config MEMTEST ++ bool "Memtest" ++ ---help--- ++ This option adds a kernel parameter 'memtest', which allows memtest ++ to be set. ++ memtest=0, mean disabled; -- default ++ memtest=1, mean do 1 test pattern; ++ ... ++ memtest=4, mean do 4 test patterns. ++ If you are unsure how to answer this question, answer N. ++ ++config X86_SUMMIT_NUMA ++ def_bool y ++ depends on X86_32 && NUMA && X86_32_NON_STANDARD ++ ++config X86_CYCLONE_TIMER ++ def_bool y ++ depends on X86_SUMMIT ++ ++source "arch/x86/Kconfig.cpu" ++ ++config HPET_TIMER ++ def_bool X86_64 ++ prompt "HPET Timer Support" if X86_32 ++ ---help--- ++ Use the IA-PC HPET (High Precision Event Timer) to manage ++ time in preference to the PIT and RTC, if a HPET is ++ present. ++ HPET is the next generation timer replacing legacy 8254s. ++ The HPET provides a stable time base on SMP ++ systems, unlike the TSC, but it is more expensive to access, ++ as it is off-chip. You can find the HPET spec at ++ . ++ ++ You can safely choose Y here. However, HPET will only be ++ activated if the platform and the BIOS support this feature. ++ Otherwise the 8254 will be used for timing services. ++ ++ Choose N to continue using the legacy 8254 timer. ++ ++config HPET_EMULATE_RTC ++ def_bool y ++ depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) ++ ++config APB_TIMER ++ def_bool y if X86_INTEL_MID ++ prompt "Intel MID APB Timer Support" if X86_INTEL_MID ++ select DW_APB_TIMER ++ depends on X86_INTEL_MID && SFI ++ help ++ APB timer is the replacement for 8254, HPET on X86 MID platforms. ++ The APBT provides a stable time base on SMP ++ systems, unlike the TSC, but it is more expensive to access, ++ as it is off-chip. APB timers are always running regardless of CPU ++ C states, they are used as per CPU clockevent device when possible. ++ ++# Mark as expert because too many people got it wrong. ++# The code disables itself when not needed. ++config DMI ++ default y ++ bool "Enable DMI scanning" if EXPERT ++ ---help--- ++ Enabled scanning of DMI to identify machine quirks. Say Y ++ here unless you have verified that your setup is not ++ affected by entries in the DMI blacklist. Required by PNP ++ BIOS code. ++ ++config GART_IOMMU ++ bool "GART IOMMU support" if EXPERT ++ default y ++ select SWIOTLB ++ depends on X86_64 && PCI && AMD_NB ++ ---help--- ++ Support for full DMA access of devices with 32bit memory access only ++ on systems with more than 3GB. This is usually needed for USB, ++ sound, many IDE/SATA chipsets and some other devices. ++ Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART ++ based hardware IOMMU and a software bounce buffer based IOMMU used ++ on Intel systems and as fallback. ++ The code is only active when needed (enough memory and limited ++ device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified ++ too. ++ ++config CALGARY_IOMMU ++ bool "IBM Calgary IOMMU support" ++ select SWIOTLB ++ depends on X86_64 && PCI ++ ---help--- ++ Support for hardware IOMMUs in IBM's xSeries x366 and x460 ++ systems. Needed to run systems with more than 3GB of memory ++ properly with 32-bit PCI devices that do not support DAC ++ (Double Address Cycle). Calgary also supports bus level ++ isolation, where all DMAs pass through the IOMMU. This ++ prevents them from going anywhere except their intended ++ destination. This catches hard-to-find kernel bugs and ++ mis-behaving drivers and devices that do not use the DMA-API ++ properly to set up their DMA buffers. The IOMMU can be ++ turned off at boot time with the iommu=off parameter. ++ Normally the kernel will make the right choice by itself. ++ If unsure, say Y. ++ ++config CALGARY_IOMMU_ENABLED_BY_DEFAULT ++ def_bool y ++ prompt "Should Calgary be enabled by default?" ++ depends on CALGARY_IOMMU ++ ---help--- ++ Should Calgary be enabled by default? if you choose 'y', Calgary ++ will be used (if it exists). If you choose 'n', Calgary will not be ++ used even if it exists. If you choose 'n' and would like to use ++ Calgary anyway, pass 'iommu=calgary' on the kernel command line. ++ If unsure, say Y. ++ ++# need this always selected by IOMMU for the VIA workaround ++config SWIOTLB ++ def_bool y if X86_64 ++ ---help--- ++ Support for software bounce buffers used on x86-64 systems ++ which don't have a hardware IOMMU. Using this PCI devices ++ which can only access 32-bits of memory can be used on systems ++ with more than 3 GB of memory. ++ If unsure, say Y. ++ ++config IOMMU_HELPER ++ def_bool y ++ depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU ++ ++config MAXSMP ++ bool "Enable Maximum number of SMP Processors and NUMA Nodes" ++ depends on X86_64 && SMP && DEBUG_KERNEL ++ select CPUMASK_OFFSTACK ++ ---help--- ++ Enable maximum number of CPUS and NUMA Nodes for this architecture. ++ If unsure, say N. ++ ++config NR_CPUS ++ int "Maximum number of CPUs" if SMP && !MAXSMP ++ range 2 8 if SMP && X86_32 && !X86_BIGSMP ++ range 2 512 if SMP && !MAXSMP ++ default "1" if !SMP ++ default "4096" if MAXSMP ++ default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000) ++ default "8" if SMP ++ ---help--- ++ This allows you to specify the maximum number of CPUs which this ++ kernel will support. The maximum supported value is 512 and the ++ minimum value which makes sense is 2. ++ ++ This is purely to save memory - each supported CPU adds ++ approximately eight kilobytes to the kernel image. ++ ++config SCHED_SMT ++ bool "SMT (Hyperthreading) scheduler support" ++ depends on X86_HT ++ ---help--- ++ SMT scheduler support improves the CPU scheduler's decision making ++ when dealing with Intel Pentium 4 chips with HyperThreading at a ++ cost of slightly increased overhead in some places. If unsure say ++ N here. ++ ++config SCHED_MC ++ def_bool y ++ prompt "Multi-core scheduler support" ++ depends on X86_HT ++ ---help--- ++ Multi-core scheduler support improves the CPU scheduler's decision ++ making when dealing with multi-core CPU chips at a cost of slightly ++ increased overhead in some places. If unsure say N here. ++ ++source "kernel/Kconfig.preempt" ++ ++config X86_UP_APIC ++ bool "Local APIC support on uniprocessors" ++ depends on X86_32 && !SMP && !X86_32_NON_STANDARD ++ ---help--- ++ A local APIC (Advanced Programmable Interrupt Controller) is an ++ integrated interrupt controller in the CPU. If you have a single-CPU ++ system which has a processor with a local APIC, you can say Y here to ++ enable and use it. If you say Y here even though your machine doesn't ++ have a local APIC, then the kernel will still run with no slowdown at ++ all. The local APIC supports CPU-generated self-interrupts (timer, ++ performance counters), and the NMI watchdog which detects hard ++ lockups. ++ ++config X86_UP_IOAPIC ++ bool "IO-APIC support on uniprocessors" ++ depends on X86_UP_APIC ++ ---help--- ++ An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an ++ SMP-capable replacement for PC-style interrupt controllers. Most ++ SMP systems and many recent uniprocessor systems have one. ++ ++ If you have a single-CPU system with an IO-APIC, you can say Y here ++ to use it. If you say Y here even though your machine doesn't have ++ an IO-APIC, then the kernel will still run with no slowdown at all. ++ ++config X86_LOCAL_APIC ++ def_bool y ++ depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC ++ ++config X86_IO_APIC ++ def_bool y ++ depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC ++ ++config X86_VISWS_APIC ++ def_bool y ++ depends on X86_32 && X86_VISWS ++ ++config X86_REROUTE_FOR_BROKEN_BOOT_IRQS ++ bool "Reroute for broken boot IRQs" ++ depends on X86_IO_APIC ++ ---help--- ++ This option enables a workaround that fixes a source of ++ spurious interrupts. This is recommended when threaded ++ interrupt handling is used on systems where the generation of ++ superfluous "boot interrupts" cannot be disabled. ++ ++ Some chipsets generate a legacy INTx "boot IRQ" when the IRQ ++ entry in the chipset's IO-APIC is masked (as, e.g. the RT ++ kernel does during interrupt handling). On chipsets where this ++ boot IRQ generation cannot be disabled, this workaround keeps ++ the original IRQ line masked so that only the equivalent "boot ++ IRQ" is delivered to the CPUs. The workaround also tells the ++ kernel to set up the IRQ handler on the boot IRQ line. In this ++ way only one interrupt is delivered to the kernel. Otherwise ++ the spurious second interrupt may cause the kernel to bring ++ down (vital) interrupt lines. ++ ++ Only affects "broken" chipsets. Interrupt sharing may be ++ increased on these systems. ++ ++config X86_MCE ++ bool "Machine Check / overheating reporting" ++ default y ++ ---help--- ++ Machine Check support allows the processor to notify the ++ kernel if it detects a problem (e.g. overheating, data corruption). ++ The action the kernel takes depends on the severity of the problem, ++ ranging from warning messages to halting the machine. ++ ++config X86_MCE_INTEL ++ def_bool y ++ prompt "Intel MCE features" ++ depends on X86_MCE && X86_LOCAL_APIC ++ ---help--- ++ Additional support for intel specific MCE features such as ++ the thermal monitor. ++ ++config X86_MCE_AMD ++ def_bool y ++ prompt "AMD MCE features" ++ depends on X86_MCE && X86_LOCAL_APIC ++ ---help--- ++ Additional support for AMD specific MCE features such as ++ the DRAM Error Threshold. ++ ++config X86_ANCIENT_MCE ++ bool "Support for old Pentium 5 / WinChip machine checks" ++ depends on X86_32 && X86_MCE ++ ---help--- ++ Include support for machine check handling on old Pentium 5 or WinChip ++ systems. These typically need to be enabled explicitely on the command ++ line. ++ ++config X86_MCE_THRESHOLD ++ depends on X86_MCE_AMD || X86_MCE_INTEL ++ def_bool y ++ ++config X86_MCE_INJECT ++ depends on X86_MCE ++ tristate "Machine check injector support" ++ ---help--- ++ Provide support for injecting machine checks for testing purposes. ++ If you don't know what a machine check is and you don't do kernel ++ QA it is safe to say n. ++ ++config X86_THERMAL_VECTOR ++ def_bool y ++ depends on X86_MCE_INTEL ++ ++config VM86 ++ bool "Enable VM86 support" if EXPERT ++ default y ++ depends on X86_32 ++ ---help--- ++ This option is required by programs like DOSEMU to run 16-bit legacy ++ code on X86 processors. It also may be needed by software like ++ XFree86 to initialize some video cards via BIOS. Disabling this ++ option saves about 6k. ++ ++config TOSHIBA ++ tristate "Toshiba Laptop support" ++ depends on X86_32 ++ ---help--- ++ This adds a driver to safely access the System Management Mode of ++ the CPU on Toshiba portables with a genuine Toshiba BIOS. It does ++ not work on models with a Phoenix BIOS. The System Management Mode ++ is used to set the BIOS and power saving options on Toshiba portables. ++ ++ For information on utilities to make use of this driver see the ++ Toshiba Linux utilities web site at: ++ . ++ ++ Say Y if you intend to run this kernel on a Toshiba portable. ++ Say N otherwise. ++ ++config I8K ++ tristate "Dell laptop support" ++ select HWMON ++ ---help--- ++ This adds a driver to safely access the System Management Mode ++ of the CPU on the Dell Inspiron 8000. The System Management Mode ++ is used to read cpu temperature and cooling fan status and to ++ control the fans on the I8K portables. ++ ++ This driver has been tested only on the Inspiron 8000 but it may ++ also work with other Dell laptops. You can force loading on other ++ models by passing the parameter `force=1' to the module. Use at ++ your own risk. ++ ++ For information on utilities to make use of this driver see the ++ I8K Linux utilities web site at: ++ ++ ++ Say Y if you intend to run this kernel on a Dell Inspiron 8000. ++ Say N otherwise. ++ ++config X86_REBOOTFIXUPS ++ bool "Enable X86 board specific fixups for reboot" ++ depends on X86_32 ++ ---help--- ++ This enables chipset and/or board specific fixups to be done ++ in order to get reboot to work correctly. This is only needed on ++ some combinations of hardware and BIOS. The symptom, for which ++ this config is intended, is when reboot ends with a stalled/hung ++ system. ++ ++ Currently, the only fixup is for the Geode machines using ++ CS5530A and CS5536 chipsets and the RDC R-321x SoC. ++ ++ Say Y if you want to enable the fixup. Currently, it's safe to ++ enable this option even if you don't need it. ++ Say N otherwise. ++ ++config MICROCODE ++ tristate "CPU microcode loading support" ++ select FW_LOADER ++ ---help--- ++ ++ If you say Y here, you will be able to update the microcode on ++ certain Intel and AMD processors. The Intel support is for the ++ IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, ++ Xeon etc. The AMD support is for families 0x10 and later. You will ++ obviously need the actual microcode binary data itself which is not ++ shipped with the Linux kernel. ++ ++ This option selects the general module only, you need to select ++ at least one vendor specific module as well. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called microcode. ++ ++config MICROCODE_INTEL ++ bool "Intel microcode loading support" ++ depends on MICROCODE ++ default MICROCODE ++ select FW_LOADER ++ ---help--- ++ This options enables microcode patch loading support for Intel ++ processors. ++ ++ For latest news and information on obtaining all the required ++ Intel ingredients for this driver, check: ++ . ++ ++config MICROCODE_AMD ++ bool "AMD microcode loading support" ++ depends on MICROCODE ++ select FW_LOADER ++ ---help--- ++ If you select this option, microcode patch loading support for AMD ++ processors will be enabled. ++ ++config MICROCODE_OLD_INTERFACE ++ def_bool y ++ depends on MICROCODE ++ ++config MICROCODE_INTEL_LIB ++ def_bool y ++ depends on MICROCODE_INTEL ++ ++config MICROCODE_INTEL_EARLY ++ bool "Early load microcode" ++ depends on MICROCODE_INTEL && BLK_DEV_INITRD ++ default y ++ help ++ This option provides functionality to read additional microcode data ++ at the beginning of initrd image. The data tells kernel to load ++ microcode to CPU's as early as possible. No functional change if no ++ microcode data is glued to the initrd, therefore it's safe to say Y. ++ ++config MICROCODE_EARLY ++ def_bool y ++ depends on MICROCODE_INTEL_EARLY ++ ++config X86_MSR ++ tristate "/dev/cpu/*/msr - Model-specific register support" ++ ---help--- ++ This device gives privileged processes access to the x86 ++ Model-Specific Registers (MSRs). It is a character device with ++ major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. ++ MSR accesses are directed to a specific CPU on multi-processor ++ systems. ++ ++config X86_CPUID ++ tristate "/dev/cpu/*/cpuid - CPU information support" ++ ---help--- ++ This device gives processes access to the x86 CPUID instruction to ++ be executed on a specific processor. It is a character device ++ with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to ++ /dev/cpu/31/cpuid. ++ ++choice ++ prompt "High Memory Support" ++ default HIGHMEM64G if X86_NUMAQ ++ default HIGHMEM4G ++ depends on X86_32 ++ ++config NOHIGHMEM ++ bool "off" ++ depends on !X86_NUMAQ ++ ---help--- ++ Linux can use up to 64 Gigabytes of physical memory on x86 systems. ++ However, the address space of 32-bit x86 processors is only 4 ++ Gigabytes large. That means that, if you have a large amount of ++ physical memory, not all of it can be "permanently mapped" by the ++ kernel. The physical memory that's not permanently mapped is called ++ "high memory". ++ ++ If you are compiling a kernel which will never run on a machine with ++ more than 1 Gigabyte total physical RAM, answer "off" here (default ++ choice and suitable for most users). This will result in a "3GB/1GB" ++ split: 3GB are mapped so that each process sees a 3GB virtual memory ++ space and the remaining part of the 4GB virtual memory space is used ++ by the kernel to permanently map as much physical memory as ++ possible. ++ ++ If the machine has between 1 and 4 Gigabytes physical RAM, then ++ answer "4GB" here. ++ ++ If more than 4 Gigabytes is used then answer "64GB" here. This ++ selection turns Intel PAE (Physical Address Extension) mode on. ++ PAE implements 3-level paging on IA32 processors. PAE is fully ++ supported by Linux, PAE mode is implemented on all recent Intel ++ processors (Pentium Pro and better). NOTE: If you say "64GB" here, ++ then the kernel will not boot on CPUs that don't support PAE! ++ ++ The actual amount of total physical memory will either be ++ auto detected or can be forced by using a kernel command line option ++ such as "mem=256M". (Try "man bootparam" or see the documentation of ++ your boot loader (lilo or loadlin) about how to pass options to the ++ kernel at boot time.) ++ ++ If unsure, say "off". ++ ++config HIGHMEM4G ++ bool "4GB" ++ depends on !X86_NUMAQ ++ ---help--- ++ Select this if you have a 32-bit processor and between 1 and 4 ++ gigabytes of physical RAM. ++ ++config HIGHMEM64G ++ bool "64GB" ++ depends on !M486 ++ select X86_PAE ++ ---help--- ++ Select this if you have a 32-bit processor and more than 4 ++ gigabytes of physical RAM. ++ ++endchoice ++ ++choice ++ prompt "Memory split" if EXPERT ++ default VMSPLIT_3G ++ depends on X86_32 ++ ---help--- ++ Select the desired split between kernel and user memory. ++ ++ If the address range available to the kernel is less than the ++ physical memory installed, the remaining memory will be available ++ as "high memory". Accessing high memory is a little more costly ++ than low memory, as it needs to be mapped into the kernel first. ++ Note that increasing the kernel address space limits the range ++ available to user programs, making the address space there ++ tighter. Selecting anything other than the default 3G/1G split ++ will also likely make your kernel incompatible with binary-only ++ kernel modules. ++ ++ If you are not absolutely sure what you are doing, leave this ++ option alone! ++ ++ config VMSPLIT_3G ++ bool "3G/1G user/kernel split" ++ config VMSPLIT_3G_OPT ++ depends on !X86_PAE ++ bool "3G/1G user/kernel split (for full 1G low memory)" ++ config VMSPLIT_2G ++ bool "2G/2G user/kernel split" ++ config VMSPLIT_2G_OPT ++ depends on !X86_PAE ++ bool "2G/2G user/kernel split (for full 2G low memory)" ++ config VMSPLIT_1G ++ bool "1G/3G user/kernel split" ++endchoice ++ ++config PAGE_OFFSET ++ hex ++ default 0xB0000000 if VMSPLIT_3G_OPT ++ default 0x80000000 if VMSPLIT_2G ++ default 0x78000000 if VMSPLIT_2G_OPT ++ default 0x40000000 if VMSPLIT_1G ++ default 0xC0000000 ++ depends on X86_32 ++ ++config HIGHMEM ++ def_bool y ++ depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) ++ ++config X86_PAE ++ bool "PAE (Physical Address Extension) Support" ++ depends on X86_32 && !HIGHMEM4G ++ ---help--- ++ PAE is required for NX support, and furthermore enables ++ larger swapspace support for non-overcommit purposes. It ++ has the cost of more pagetable lookup overhead, and also ++ consumes more pagetable space per process. ++ ++config ARCH_PHYS_ADDR_T_64BIT ++ def_bool y ++ depends on X86_64 || X86_PAE ++ ++config ARCH_DMA_ADDR_T_64BIT ++ def_bool y ++ depends on X86_64 || HIGHMEM64G ++ ++config DIRECT_GBPAGES ++ bool "Enable 1GB pages for kernel pagetables" if EXPERT ++ default y ++ depends on X86_64 ++ ---help--- ++ Allow the kernel linear mapping to use 1GB pages on CPUs that ++ support it. This can improve the kernel's performance a tiny bit by ++ reducing TLB pressure. If in doubt, say "Y". ++ ++# Common NUMA Features ++config NUMA ++ bool "Numa Memory Allocation and Scheduler Support" ++ depends on SMP ++ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI)) ++ default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) ++ ---help--- ++ Enable NUMA (Non Uniform Memory Access) support. ++ ++ The kernel will try to allocate memory used by a CPU on the ++ local memory controller of the CPU and add some more ++ NUMA awareness to the kernel. ++ ++ For 64-bit this is recommended if the system is Intel Core i7 ++ (or later), AMD Opteron, or EM64T NUMA. ++ ++ For 32-bit this is only needed on (rare) 32-bit-only platforms ++ that support NUMA topologies, such as NUMAQ / Summit, or if you ++ boot a 32-bit kernel on a 64-bit NUMA platform. ++ ++ Otherwise, you should say N. ++ ++comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" ++ depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) ++ ++config AMD_NUMA ++ def_bool y ++ prompt "Old style AMD Opteron NUMA detection" ++ depends on X86_64 && NUMA && PCI ++ ---help--- ++ Enable AMD NUMA node topology detection. You should say Y here if ++ you have a multi processor AMD system. This uses an old method to ++ read the NUMA configuration directly from the builtin Northbridge ++ of Opteron. It is recommended to use X86_64_ACPI_NUMA instead, ++ which also takes priority if both are compiled in. ++ ++config X86_64_ACPI_NUMA ++ def_bool y ++ prompt "ACPI NUMA detection" ++ depends on X86_64 && NUMA && ACPI && PCI ++ select ACPI_NUMA ++ ---help--- ++ Enable ACPI SRAT based node topology detection. ++ ++# Some NUMA nodes have memory ranges that span ++# other nodes. Even though a pfn is valid and ++# between a node's start and end pfns, it may not ++# reside on that node. See memmap_init_zone() ++# for details. ++config NODES_SPAN_OTHER_NODES ++ def_bool y ++ depends on X86_64_ACPI_NUMA ++ ++config NUMA_EMU ++ bool "NUMA emulation" ++ depends on NUMA ++ ---help--- ++ Enable NUMA emulation. A flat machine will be split ++ into virtual nodes when booted with "numa=fake=N", where N is the ++ number of nodes. This is only useful for debugging. ++ ++config NODES_SHIFT ++ int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP ++ range 1 10 ++ default "10" if MAXSMP ++ default "6" if X86_64 ++ default "4" if X86_NUMAQ ++ default "3" ++ depends on NEED_MULTIPLE_NODES ++ ---help--- ++ Specify the maximum number of NUMA Nodes available on the target ++ system. Increases memory reserved to accommodate various tables. ++ ++config ARCH_HAVE_MEMORY_PRESENT ++ def_bool y ++ depends on X86_32 && DISCONTIGMEM ++ ++config NEED_NODE_MEMMAP_SIZE ++ def_bool y ++ depends on X86_32 && (DISCONTIGMEM || SPARSEMEM) ++ ++config ARCH_FLATMEM_ENABLE ++ def_bool y ++ depends on X86_32 && !NUMA ++ ++config ARCH_DISCONTIGMEM_ENABLE ++ def_bool y ++ depends on NUMA && X86_32 ++ ++config ARCH_DISCONTIGMEM_DEFAULT ++ def_bool y ++ depends on NUMA && X86_32 ++ ++config ARCH_SPARSEMEM_ENABLE ++ def_bool y ++ depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD ++ select SPARSEMEM_STATIC if X86_32 ++ select SPARSEMEM_VMEMMAP_ENABLE if X86_64 ++ ++config ARCH_SPARSEMEM_DEFAULT ++ def_bool y ++ depends on X86_64 ++ ++config ARCH_SELECT_MEMORY_MODEL ++ def_bool y ++ depends on ARCH_SPARSEMEM_ENABLE ++ ++config ARCH_MEMORY_PROBE ++ def_bool y ++ depends on X86_64 && MEMORY_HOTPLUG ++ ++config ARCH_PROC_KCORE_TEXT ++ def_bool y ++ depends on X86_64 && PROC_KCORE ++ ++config ILLEGAL_POINTER_VALUE ++ hex ++ default 0 if X86_32 ++ default 0xdead000000000000 if X86_64 ++ ++source "mm/Kconfig" ++ ++config HIGHPTE ++ bool "Allocate 3rd-level pagetables from highmem" ++ depends on HIGHMEM ++ ---help--- ++ The VM uses one page table entry for each page of physical memory. ++ For systems with a lot of RAM, this can be wasteful of precious ++ low memory. Setting this option will put user-space page table ++ entries in high memory. ++ ++config X86_CHECK_BIOS_CORRUPTION ++ bool "Check for low memory corruption" ++ ---help--- ++ Periodically check for memory corruption in low memory, which ++ is suspected to be caused by BIOS. Even when enabled in the ++ configuration, it is disabled at runtime. Enable it by ++ setting "memory_corruption_check=1" on the kernel command ++ line. By default it scans the low 64k of memory every 60 ++ seconds; see the memory_corruption_check_size and ++ memory_corruption_check_period parameters in ++ Documentation/kernel-parameters.txt to adjust this. ++ ++ When enabled with the default parameters, this option has ++ almost no overhead, as it reserves a relatively small amount ++ of memory and scans it infrequently. It both detects corruption ++ and prevents it from affecting the running system. ++ ++ It is, however, intended as a diagnostic tool; if repeatable ++ BIOS-originated corruption always affects the same memory, ++ you can use memmap= to prevent the kernel from using that ++ memory. ++ ++config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK ++ bool "Set the default setting of memory_corruption_check" ++ depends on X86_CHECK_BIOS_CORRUPTION ++ default y ++ ---help--- ++ Set whether the default state of memory_corruption_check is ++ on or off. ++ ++config X86_RESERVE_LOW ++ int "Amount of low memory, in kilobytes, to reserve for the BIOS" ++ default 64 ++ range 4 640 ++ ---help--- ++ Specify the amount of low memory to reserve for the BIOS. ++ ++ The first page contains BIOS data structures that the kernel ++ must not use, so that page must always be reserved. ++ ++ By default we reserve the first 64K of physical RAM, as a ++ number of BIOSes are known to corrupt that memory range ++ during events such as suspend/resume or monitor cable ++ insertion, so it must not be used by the kernel. ++ ++ You can set this to 4 if you are absolutely sure that you ++ trust the BIOS to get all its memory reservations and usages ++ right. If you know your BIOS have problems beyond the ++ default 64K area, you can set this to 640 to avoid using the ++ entire low memory range. ++ ++ If you have doubts about the BIOS (e.g. suspend/resume does ++ not work or there's kernel crashes after certain hardware ++ hotplug events) then you might want to enable ++ X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check ++ typical corruption patterns. ++ ++ Leave this to the default value of 64 if you are unsure. ++ ++config MATH_EMULATION ++ bool ++ prompt "Math emulation" if X86_32 ++ ---help--- ++ Linux can emulate a math coprocessor (used for floating point ++ operations) if you don't have one. 486DX and Pentium processors have ++ a math coprocessor built in, 486SX and 386 do not, unless you added ++ a 487DX or 387, respectively. (The messages during boot time can ++ give you some hints here ["man dmesg"].) Everyone needs either a ++ coprocessor or this emulation. ++ ++ If you don't have a math coprocessor, you need to say Y here; if you ++ say Y here even though you have a coprocessor, the coprocessor will ++ be used nevertheless. (This behavior can be changed with the kernel ++ command line option "no387", which comes handy if your coprocessor ++ is broken. Try "man bootparam" or see the documentation of your boot ++ loader (lilo or loadlin) about how to pass options to the kernel at ++ boot time.) This means that it is a good idea to say Y here if you ++ intend to use this kernel on different machines. ++ ++ More information about the internals of the Linux math coprocessor ++ emulation can be found in . ++ ++ If you are not sure, say Y; apart from resulting in a 66 KB bigger ++ kernel, it won't hurt. ++ ++config MTRR ++ def_bool y ++ prompt "MTRR (Memory Type Range Register) support" if EXPERT ++ ---help--- ++ On Intel P6 family processors (Pentium Pro, Pentium II and later) ++ the Memory Type Range Registers (MTRRs) may be used to control ++ processor access to memory ranges. This is most useful if you have ++ a video (VGA) card on a PCI or AGP bus. Enabling write-combining ++ allows bus write transfers to be combined into a larger transfer ++ before bursting over the PCI/AGP bus. This can increase performance ++ of image write operations 2.5 times or more. Saying Y here creates a ++ /proc/mtrr file which may be used to manipulate your processor's ++ MTRRs. Typically the X server should use this. ++ ++ This code has a reasonably generic interface so that similar ++ control registers on other processors can be easily supported ++ as well: ++ ++ The Cyrix 6x86, 6x86MX and M II processors have Address Range ++ Registers (ARRs) which provide a similar functionality to MTRRs. For ++ these, the ARRs are used to emulate the MTRRs. ++ The AMD K6-2 (stepping 8 and above) and K6-3 processors have two ++ MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing ++ write-combining. All of these processors are supported by this code ++ and it makes sense to say Y here if you have one of them. ++ ++ Saying Y here also fixes a problem with buggy SMP BIOSes which only ++ set the MTRRs for the boot CPU and not for the secondary CPUs. This ++ can lead to all sorts of problems, so it's good to say Y here. ++ ++ You can safely say Y even if your machine doesn't have MTRRs, you'll ++ just add about 9 KB to your kernel. ++ ++ See for more information. ++ ++config MTRR_SANITIZER ++ def_bool y ++ prompt "MTRR cleanup support" ++ depends on MTRR ++ ---help--- ++ Convert MTRR layout from continuous to discrete, so X drivers can ++ add writeback entries. ++ ++ Can be disabled with disable_mtrr_cleanup on the kernel command line. ++ The largest mtrr entry size for a continuous block can be set with ++ mtrr_chunk_size. ++ ++ If unsure, say Y. ++ ++config MTRR_SANITIZER_ENABLE_DEFAULT ++ int "MTRR cleanup enable value (0-1)" ++ range 0 1 ++ default "0" ++ depends on MTRR_SANITIZER ++ ---help--- ++ Enable mtrr cleanup default value ++ ++config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT ++ int "MTRR cleanup spare reg num (0-7)" ++ range 0 7 ++ default "1" ++ depends on MTRR_SANITIZER ++ ---help--- ++ mtrr cleanup spare entries default, it can be changed via ++ mtrr_spare_reg_nr=N on the kernel command line. ++ ++config X86_PAT ++ def_bool y ++ prompt "x86 PAT support" if EXPERT ++ depends on MTRR ++ ---help--- ++ Use PAT attributes to setup page level cache control. ++ ++ PATs are the modern equivalents of MTRRs and are much more ++ flexible than MTRRs. ++ ++ Say N here if you see bootup problems (boot crash, boot hang, ++ spontaneous reboots) or a non-working video driver. ++ ++ If unsure, say Y. ++ ++config ARCH_USES_PG_UNCACHED ++ def_bool y ++ depends on X86_PAT ++ ++config ARCH_RANDOM ++ def_bool y ++ prompt "x86 architectural random number generator" if EXPERT ++ ---help--- ++ Enable the x86 architectural RDRAND instruction ++ (Intel Bull Mountain technology) to generate random numbers. ++ If supported, this is a high bandwidth, cryptographically ++ secure hardware random number generator. ++ ++config X86_SMAP ++ def_bool y ++ prompt "Supervisor Mode Access Prevention" if EXPERT ++ ---help--- ++ Supervisor Mode Access Prevention (SMAP) is a security ++ feature in newer Intel processors. There is a small ++ performance cost if this enabled and turned on; there is ++ also a small increase in the kernel size if this is enabled. ++ ++ If unsure, say Y. ++ ++config EFI ++ bool "EFI runtime service support" ++ depends on ACPI ++ select UCS2_STRING ++ ---help--- ++ This enables the kernel to use EFI runtime services that are ++ available (such as the EFI variable services). ++ ++ This option is only useful on systems that have EFI firmware. ++ In addition, you should use the latest ELILO loader available ++ at in order to take advantage ++ of EFI runtime services. However, even with this option, the ++ resultant kernel should continue to boot on existing non-EFI ++ platforms. ++ ++config EFI_STUB ++ bool "EFI stub support" ++ depends on EFI ++ ---help--- ++ This kernel feature allows a bzImage to be loaded directly ++ by EFI firmware without the use of a bootloader. ++ ++ See Documentation/x86/efi-stub.txt for more information. ++ ++config SECCOMP ++ def_bool y ++ prompt "Enable seccomp to safely compute untrusted bytecode" ++ ---help--- ++ This kernel feature is useful for number crunching applications ++ that may need to compute untrusted bytecode during their ++ execution. By using pipes or other transports made available to ++ the process as file descriptors supporting the read/write ++ syscalls, it's possible to isolate those applications in ++ their own address space using seccomp. Once seccomp is ++ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled ++ and the task is only allowed to execute a few safe syscalls ++ defined by each seccomp mode. ++ ++ If unsure, say Y. Only embedded should say N here. ++ ++config CC_STACKPROTECTOR ++ bool "Enable -fstack-protector buffer overflow detection" ++ ---help--- ++ This option turns on the -fstack-protector GCC feature. This ++ feature puts, at the beginning of functions, a canary value on ++ the stack just before the return address, and validates ++ the value just before actually returning. Stack based buffer ++ overflows (that need to overwrite this return address) now also ++ overwrite the canary, which gets detected and the attack is then ++ neutralized via a kernel panic. ++ ++ This feature requires gcc version 4.2 or above, or a distribution ++ gcc with the feature backported. Older versions are automatically ++ detected and for those versions, this configuration option is ++ ignored. (and a warning is printed during bootup) ++ ++source kernel/Kconfig.hz ++ ++config KEXEC ++ bool "kexec system call" ++ ---help--- ++ kexec is a system call that implements the ability to shutdown your ++ current kernel, and to start another kernel. It is like a reboot ++ but it is independent of the system firmware. And like a reboot ++ you can start any kernel with it, not just Linux. ++ ++ The name comes from the similarity to the exec system call. ++ ++ It is an ongoing process to be certain the hardware in a machine ++ is properly shutdown, so do not be surprised if this code does not ++ initially work for you. It may help to enable device hotplugging ++ support. As of this writing the exact hardware interface is ++ strongly in flux, so no good recommendation can be made. ++ ++config CRASH_DUMP ++ bool "kernel crash dumps" ++ depends on X86_64 || (X86_32 && HIGHMEM) ++ ---help--- ++ Generate crash dump after being started by kexec. ++ This should be normally only set in special crash dump kernels ++ which are loaded in the main kernel with kexec-tools into ++ a specially reserved region and then later executed after ++ a crash by kdump/kexec. The crash dump kernel must be compiled ++ to a memory address not used by the main kernel or BIOS using ++ PHYSICAL_START, or it must be built as a relocatable image ++ (CONFIG_RELOCATABLE=y). ++ For more details see Documentation/kdump/kdump.txt ++ ++config KEXEC_JUMP ++ bool "kexec jump" ++ depends on KEXEC && HIBERNATION ++ ---help--- ++ Jump between original kernel and kexeced kernel and invoke ++ code in physical address mode via KEXEC ++ ++config PHYSICAL_START ++ hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) ++ default "0x1000000" ++ ---help--- ++ This gives the physical address where the kernel is loaded. ++ ++ If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then ++ bzImage will decompress itself to above physical address and ++ run from there. Otherwise, bzImage will run from the address where ++ it has been loaded by the boot loader and will ignore above physical ++ address. ++ ++ In normal kdump cases one does not have to set/change this option ++ as now bzImage can be compiled as a completely relocatable image ++ (CONFIG_RELOCATABLE=y) and be used to load and run from a different ++ address. This option is mainly useful for the folks who don't want ++ to use a bzImage for capturing the crash dump and want to use a ++ vmlinux instead. vmlinux is not relocatable hence a kernel needs ++ to be specifically compiled to run from a specific memory area ++ (normally a reserved region) and this option comes handy. ++ ++ So if you are using bzImage for capturing the crash dump, ++ leave the value here unchanged to 0x1000000 and set ++ CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux ++ for capturing the crash dump change this value to start of ++ the reserved region. In other words, it can be set based on ++ the "X" value as specified in the "crashkernel=YM@XM" ++ command line boot parameter passed to the panic-ed ++ kernel. Please take a look at Documentation/kdump/kdump.txt ++ for more details about crash dumps. ++ ++ Usage of bzImage for capturing the crash dump is recommended as ++ one does not have to build two kernels. Same kernel can be used ++ as production kernel and capture kernel. Above option should have ++ gone away after relocatable bzImage support is introduced. But it ++ is present because there are users out there who continue to use ++ vmlinux for dump capture. This option should go away down the ++ line. ++ ++ Don't change this unless you know what you are doing. ++ ++config RELOCATABLE ++ bool "Build a relocatable kernel" ++ default y ++ ---help--- ++ This builds a kernel image that retains relocation information ++ so it can be loaded someplace besides the default 1MB. ++ The relocations tend to make the kernel binary about 10% larger, ++ but are discarded at runtime. ++ ++ One use is for the kexec on panic case where the recovery kernel ++ must live at a different physical address than the primary ++ kernel. ++ ++ Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address ++ it has been loaded at and the compile time physical address ++ (CONFIG_PHYSICAL_START) is ignored. ++ ++# Relocation on x86-32 needs some additional build support ++config X86_NEED_RELOCS ++ def_bool y ++ depends on X86_32 && RELOCATABLE ++ ++config PHYSICAL_ALIGN ++ hex "Alignment value to which kernel should be aligned" if X86_32 ++ default "0x1000000" ++ range 0x2000 0x1000000 ++ ---help--- ++ This value puts the alignment restrictions on physical address ++ where kernel is loaded and run from. Kernel is compiled for an ++ address which meets above alignment restriction. ++ ++ If bootloader loads the kernel at a non-aligned address and ++ CONFIG_RELOCATABLE is set, kernel will move itself to nearest ++ address aligned to above value and run from there. ++ ++ If bootloader loads the kernel at a non-aligned address and ++ CONFIG_RELOCATABLE is not set, kernel will ignore the run time ++ load address and decompress itself to the address it has been ++ compiled for and run from there. The address for which kernel is ++ compiled already meets above alignment restrictions. Hence the ++ end result is that kernel runs from a physical address meeting ++ above alignment restrictions. ++ ++ Don't change this unless you know what you are doing. ++ ++config HOTPLUG_CPU ++ bool "Support for hot-pluggable CPUs" ++ depends on SMP && HOTPLUG ++ ---help--- ++ Say Y here to allow turning CPUs off and on. CPUs can be ++ controlled through /sys/devices/system/cpu. ++ ( Note: power management support will enable this option ++ automatically on SMP systems. ) ++ Say N if you want to disable CPU hotplug. ++ ++config BOOTPARAM_HOTPLUG_CPU0 ++ bool "Set default setting of cpu0_hotpluggable" ++ default n ++ depends on HOTPLUG_CPU ++ ---help--- ++ Set whether default state of cpu0_hotpluggable is on or off. ++ ++ Say Y here to enable CPU0 hotplug by default. If this switch ++ is turned on, there is no need to give cpu0_hotplug kernel ++ parameter and the CPU0 hotplug feature is enabled by default. ++ ++ Please note: there are two known CPU0 dependencies if you want ++ to enable the CPU0 hotplug feature either by this switch or by ++ cpu0_hotplug kernel parameter. ++ ++ First, resume from hibernate or suspend always starts from CPU0. ++ So hibernate and suspend are prevented if CPU0 is offline. ++ ++ Second dependency is PIC interrupts always go to CPU0. CPU0 can not ++ offline if any interrupt can not migrate out of CPU0. There may ++ be other CPU0 dependencies. ++ ++ Please make sure the dependencies are under your control before ++ you enable this feature. ++ ++ Say N if you don't want to enable CPU0 hotplug feature by default. ++ You still can enable the CPU0 hotplug feature at boot by kernel ++ parameter cpu0_hotplug. ++ ++config DEBUG_HOTPLUG_CPU0 ++ def_bool n ++ prompt "Debug CPU0 hotplug" ++ depends on HOTPLUG_CPU ++ ---help--- ++ Enabling this option offlines CPU0 (if CPU0 can be offlined) as ++ soon as possible and boots up userspace with CPU0 offlined. User ++ can online CPU0 back after boot time. ++ ++ To debug CPU0 hotplug, you need to enable CPU0 offline/online ++ feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during ++ compilation or giving cpu0_hotplug kernel parameter at boot. ++ ++ If unsure, say N. ++ ++config COMPAT_VDSO ++ def_bool y ++ prompt "Compat VDSO support" ++ depends on X86_32 || IA32_EMULATION ++ ---help--- ++ Map the 32-bit VDSO to the predictable old-style address too. ++ ++ Say N here if you are running a sufficiently recent glibc ++ version (2.3.3 or later), to remove the high-mapped ++ VDSO mapping and to exclusively use the randomized VDSO. ++ ++ If unsure, say Y. ++ ++config CMDLINE_BOOL ++ bool "Built-in kernel command line" ++ ---help--- ++ Allow for specifying boot arguments to the kernel at ++ build time. On some systems (e.g. embedded ones), it is ++ necessary or convenient to provide some or all of the ++ kernel boot arguments with the kernel itself (that is, ++ to not rely on the boot loader to provide them.) ++ ++ To compile command line arguments into the kernel, ++ set this option to 'Y', then fill in the ++ the boot arguments in CONFIG_CMDLINE. ++ ++ Systems with fully functional boot loaders (i.e. non-embedded) ++ should leave this option set to 'N'. ++ ++config CMDLINE ++ string "Built-in kernel command string" ++ depends on CMDLINE_BOOL ++ default "" ++ ---help--- ++ Enter arguments here that should be compiled into the kernel ++ image and used at boot time. If the boot loader provides a ++ command line at boot time, it is appended to this string to ++ form the full kernel command line, when the system boots. ++ ++ However, you can use the CONFIG_CMDLINE_OVERRIDE option to ++ change this behavior. ++ ++ In most cases, the command line (whether built-in or provided ++ by the boot loader) should specify the device for the root ++ file system. ++ ++config CMDLINE_OVERRIDE ++ bool "Built-in command line overrides boot loader arguments" ++ depends on CMDLINE_BOOL ++ ---help--- ++ Set this option to 'Y' to have the kernel ignore the boot loader ++ command line, and use ONLY the built-in command line. ++ ++ This is used to work around broken boot loaders. This should ++ be set to 'N' under normal conditions. ++ ++endmenu ++ ++config ARCH_ENABLE_MEMORY_HOTPLUG ++ def_bool y ++ depends on X86_64 || (X86_32 && HIGHMEM) ++ ++config ARCH_ENABLE_MEMORY_HOTREMOVE ++ def_bool y ++ depends on MEMORY_HOTPLUG ++ ++config USE_PERCPU_NUMA_NODE_ID ++ def_bool y ++ depends on NUMA ++ ++menu "Power management and ACPI options" ++ ++config ARCH_HIBERNATION_HEADER ++ def_bool y ++ depends on X86_64 && HIBERNATION ++ ++source "kernel/power/Kconfig" ++ ++source "drivers/acpi/Kconfig" ++ ++source "drivers/sfi/Kconfig" ++ ++config X86_APM_BOOT ++ def_bool y ++ depends on APM ++ ++menuconfig APM ++ tristate "APM (Advanced Power Management) BIOS support" ++ depends on X86_32 && PM_SLEEP ++ ---help--- ++ APM is a BIOS specification for saving power using several different ++ techniques. This is mostly useful for battery powered laptops with ++ APM compliant BIOSes. If you say Y here, the system time will be ++ reset after a RESUME operation, the /proc/apm device will provide ++ battery status information, and user-space programs will receive ++ notification of APM "events" (e.g. battery status change). ++ ++ If you select "Y" here, you can disable actual use of the APM ++ BIOS by passing the "apm=off" option to the kernel at boot time. ++ ++ Note that the APM support is almost completely disabled for ++ machines with more than one CPU. ++ ++ In order to use APM, you will need supporting software. For location ++ and more information, read ++ and the Battery Powered Linux mini-HOWTO, available from ++ . ++ ++ This driver does not spin down disk drives (see the hdparm(8) ++ manpage ("man 8 hdparm") for that), and it doesn't turn off ++ VESA-compliant "green" monitors. ++ ++ This driver does not support the TI 4000M TravelMate and the ACER ++ 486/DX4/75 because they don't have compliant BIOSes. Many "green" ++ desktop machines also don't have compliant BIOSes, and this driver ++ may cause those machines to panic during the boot phase. ++ ++ Generally, if you don't have a battery in your machine, there isn't ++ much point in using this driver and you should say N. If you get ++ random kernel OOPSes or reboots that don't seem to be related to ++ anything, try disabling/enabling this option (or disabling/enabling ++ APM in your BIOS). ++ ++ Some other things you should try when experiencing seemingly random, ++ "weird" problems: ++ ++ 1) make sure that you have enough swap space and that it is ++ enabled. ++ 2) pass the "no-hlt" option to the kernel ++ 3) switch on floating point emulation in the kernel and pass ++ the "no387" option to the kernel ++ 4) pass the "floppy=nodma" option to the kernel ++ 5) pass the "mem=4M" option to the kernel (thereby disabling ++ all but the first 4 MB of RAM) ++ 6) make sure that the CPU is not over clocked. ++ 7) read the sig11 FAQ at ++ 8) disable the cache from your BIOS settings ++ 9) install a fan for the video card or exchange video RAM ++ 10) install a better fan for the CPU ++ 11) exchange RAM chips ++ 12) exchange the motherboard. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called apm. ++ ++if APM ++ ++config APM_IGNORE_USER_SUSPEND ++ bool "Ignore USER SUSPEND" ++ ---help--- ++ This option will ignore USER SUSPEND requests. On machines with a ++ compliant APM BIOS, you want to say N. However, on the NEC Versa M ++ series notebooks, it is necessary to say Y because of a BIOS bug. ++ ++config APM_DO_ENABLE ++ bool "Enable PM at boot time" ++ ---help--- ++ Enable APM features at boot time. From page 36 of the APM BIOS ++ specification: "When disabled, the APM BIOS does not automatically ++ power manage devices, enter the Standby State, enter the Suspend ++ State, or take power saving steps in response to CPU Idle calls." ++ This driver will make CPU Idle calls when Linux is idle (unless this ++ feature is turned off -- see "Do CPU IDLE calls", below). This ++ should always save battery power, but more complicated APM features ++ will be dependent on your BIOS implementation. You may need to turn ++ this option off if your computer hangs at boot time when using APM ++ support, or if it beeps continuously instead of suspending. Turn ++ this off if you have a NEC UltraLite Versa 33/C or a Toshiba ++ T400CDT. This is off by default since most machines do fine without ++ this feature. ++ ++config APM_CPU_IDLE ++ depends on CPU_IDLE ++ bool "Make CPU Idle calls when idle" ++ ---help--- ++ Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop. ++ On some machines, this can activate improved power savings, such as ++ a slowed CPU clock rate, when the machine is idle. These idle calls ++ are made after the idle loop has run for some length of time (e.g., ++ 333 mS). On some machines, this will cause a hang at boot time or ++ whenever the CPU becomes idle. (On machines with more than one CPU, ++ this option does nothing.) ++ ++config APM_DISPLAY_BLANK ++ bool "Enable console blanking using APM" ++ ---help--- ++ Enable console blanking using the APM. Some laptops can use this to ++ turn off the LCD backlight when the screen blanker of the Linux ++ virtual console blanks the screen. Note that this is only used by ++ the virtual console screen blanker, and won't turn off the backlight ++ when using the X Window system. This also doesn't have anything to ++ do with your VESA-compliant power-saving monitor. Further, this ++ option doesn't work for all laptops -- it might not turn off your ++ backlight at all, or it might print a lot of errors to the console, ++ especially if you are using gpm. ++ ++config APM_ALLOW_INTS ++ bool "Allow interrupts during APM BIOS calls" ++ ---help--- ++ Normally we disable external interrupts while we are making calls to ++ the APM BIOS as a measure to lessen the effects of a badly behaving ++ BIOS implementation. The BIOS should reenable interrupts if it ++ needs to. Unfortunately, some BIOSes do not -- especially those in ++ many of the newer IBM Thinkpads. If you experience hangs when you ++ suspend, try setting this to Y. Otherwise, say N. ++ ++endif # APM ++ ++source "drivers/cpufreq/Kconfig" ++ ++source "drivers/cpuidle/Kconfig" ++ ++source "drivers/idle/Kconfig" ++ ++endmenu ++ ++ ++menu "Bus options (PCI etc.)" ++ ++config PCI ++ bool "PCI support" ++ default y ++ select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) ++ ---help--- ++ Find out whether you have a PCI motherboard. PCI is the name of a ++ bus system, i.e. the way the CPU talks to the other stuff inside ++ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or ++ VESA. If you have PCI, say Y, otherwise N. ++ ++choice ++ prompt "PCI access mode" ++ depends on X86_32 && PCI ++ default PCI_GOANY ++ ---help--- ++ On PCI systems, the BIOS can be used to detect the PCI devices and ++ determine their configuration. However, some old PCI motherboards ++ have BIOS bugs and may crash if this is done. Also, some embedded ++ PCI-based systems don't have any BIOS at all. Linux can also try to ++ detect the PCI hardware directly without using the BIOS. ++ ++ With this option, you can specify how Linux should detect the ++ PCI devices. If you choose "BIOS", the BIOS will be used, ++ if you choose "Direct", the BIOS won't be used, and if you ++ choose "MMConfig", then PCI Express MMCONFIG will be used. ++ If you choose "Any", the kernel will try MMCONFIG, then the ++ direct access method and falls back to the BIOS if that doesn't ++ work. If unsure, go with the default, which is "Any". ++ ++config PCI_GOBIOS ++ bool "BIOS" ++ ++config PCI_GOMMCONFIG ++ bool "MMConfig" ++ ++config PCI_GODIRECT ++ bool "Direct" ++ ++config PCI_GOOLPC ++ bool "OLPC XO-1" ++ depends on OLPC ++ ++config PCI_GOANY ++ bool "Any" ++ ++endchoice ++ ++config PCI_BIOS ++ def_bool y ++ depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY) ++ ++# x86-64 doesn't support PCI BIOS access from long mode so always go direct. ++config PCI_DIRECT ++ def_bool y ++ depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC || PCI_GOMMCONFIG)) ++ ++config PCI_MMCONFIG ++ def_bool y ++ depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY) ++ ++config PCI_OLPC ++ def_bool y ++ depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) ++ ++config PCI_XEN ++ def_bool y ++ depends on PCI && XEN ++ select SWIOTLB_XEN ++ ++config PCI_DOMAINS ++ def_bool y ++ depends on PCI ++ ++config PCI_MMCONFIG ++ bool "Support mmconfig PCI config space access" ++ depends on X86_64 && PCI && ACPI ++ ++config PCI_CNB20LE_QUIRK ++ bool "Read CNB20LE Host Bridge Windows" if EXPERT ++ depends on PCI ++ help ++ Read the PCI windows out of the CNB20LE host bridge. This allows ++ PCI hotplug to work on systems with the CNB20LE chipset which do ++ not have ACPI. ++ ++ There's no public spec for this chipset, and this functionality ++ is known to be incomplete. ++ ++ You should say N unless you know you need this. ++ ++source "drivers/pci/pcie/Kconfig" ++ ++source "drivers/pci/Kconfig" ++ ++# x86_64 have no ISA slots, but can have ISA-style DMA. ++config ISA_DMA_API ++ bool "ISA-style DMA support" if (X86_64 && EXPERT) ++ default y ++ help ++ Enables ISA-style DMA support for devices requiring such controllers. ++ If unsure, say Y. ++ ++if X86_32 ++ ++config ISA ++ bool "ISA support" ++ ---help--- ++ Find out whether you have ISA slots on your motherboard. ISA is the ++ name of a bus system, i.e. the way the CPU talks to the other stuff ++ inside your box. Other bus systems are PCI, EISA, MicroChannel ++ (MCA) or VESA. ISA is an older system, now being displaced by PCI; ++ newer boards don't support it. If you have ISA, say Y, otherwise N. ++ ++config EISA ++ bool "EISA support" ++ depends on ISA ++ ---help--- ++ The Extended Industry Standard Architecture (EISA) bus was ++ developed as an open alternative to the IBM MicroChannel bus. ++ ++ The EISA bus provided some of the features of the IBM MicroChannel ++ bus while maintaining backward compatibility with cards made for ++ the older ISA bus. The EISA bus saw limited use between 1988 and ++ 1995 when it was made obsolete by the PCI bus. ++ ++ Say Y here if you are building a kernel for an EISA-based machine. ++ ++ Otherwise, say N. ++ ++source "drivers/eisa/Kconfig" ++ ++config SCx200 ++ tristate "NatSemi SCx200 support" ++ ---help--- ++ This provides basic support for National Semiconductor's ++ (now AMD's) Geode processors. The driver probes for the ++ PCI-IDs of several on-chip devices, so its a good dependency ++ for other scx200_* drivers. ++ ++ If compiled as a module, the driver is named scx200. ++ ++config SCx200HR_TIMER ++ tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" ++ depends on SCx200 ++ default y ++ ---help--- ++ This driver provides a clocksource built upon the on-chip ++ 27MHz high-resolution timer. Its also a workaround for ++ NSC Geode SC-1100's buggy TSC, which loses time when the ++ processor goes idle (as is done by the scheduler). The ++ other workaround is idle=poll boot option. ++ ++config OLPC ++ bool "One Laptop Per Child support" ++ depends on !X86_PAE ++ select GPIOLIB ++ select OF ++ select OF_PROMTREE ++ select IRQ_DOMAIN ++ ---help--- ++ Add support for detecting the unique features of the OLPC ++ XO hardware. ++ ++config OLPC_XO1_PM ++ bool "OLPC XO-1 Power Management" ++ depends on OLPC && MFD_CS5535 && PM_SLEEP ++ select MFD_CORE ++ ---help--- ++ Add support for poweroff and suspend of the OLPC XO-1 laptop. ++ ++config OLPC_XO1_RTC ++ bool "OLPC XO-1 Real Time Clock" ++ depends on OLPC_XO1_PM && RTC_DRV_CMOS ++ ---help--- ++ Add support for the XO-1 real time clock, which can be used as a ++ programmable wakeup source. ++ ++config OLPC_XO1_SCI ++ bool "OLPC XO-1 SCI extras" ++ depends on OLPC && OLPC_XO1_PM ++ depends on INPUT=y ++ select POWER_SUPPLY ++ select GPIO_CS5535 ++ select MFD_CORE ++ ---help--- ++ Add support for SCI-based features of the OLPC XO-1 laptop: ++ - EC-driven system wakeups ++ - Power button ++ - Ebook switch ++ - Lid switch ++ - AC adapter status updates ++ - Battery status updates ++ ++config OLPC_XO15_SCI ++ bool "OLPC XO-1.5 SCI extras" ++ depends on OLPC && ACPI ++ select POWER_SUPPLY ++ ---help--- ++ Add support for SCI-based features of the OLPC XO-1.5 laptop: ++ - EC-driven system wakeups ++ - AC adapter status updates ++ - Battery status updates ++ ++config ALIX ++ bool "PCEngines ALIX System Support (LED setup)" ++ select GPIOLIB ++ ---help--- ++ This option enables system support for the PCEngines ALIX. ++ At present this just sets up LEDs for GPIO control on ++ ALIX2/3/6 boards. However, other system specific setup should ++ get added here. ++ ++ Note: You must still enable the drivers for GPIO and LED support ++ (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs ++ ++ Note: You have to set alix.force=1 for boards with Award BIOS. ++ ++config NET5501 ++ bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)" ++ select GPIOLIB ++ ---help--- ++ This option enables system support for the Soekris Engineering net5501. ++ ++config GEOS ++ bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)" ++ select GPIOLIB ++ depends on DMI ++ ---help--- ++ This option enables system support for the Traverse Technologies GEOS. ++ ++config TS5500 ++ bool "Technologic Systems TS-5500 platform support" ++ depends on MELAN ++ select CHECK_SIGNATURE ++ select NEW_LEDS ++ select LEDS_CLASS ++ ---help--- ++ This option enables system support for the Technologic Systems TS-5500. ++ ++endif # X86_32 ++ ++config AMD_NB ++ def_bool y ++ depends on CPU_SUP_AMD && PCI ++ ++source "drivers/pcmcia/Kconfig" ++ ++source "drivers/pci/hotplug/Kconfig" ++ ++config RAPIDIO ++ bool "RapidIO support" ++ depends on PCI ++ default n ++ help ++ If you say Y here, the kernel will include drivers and ++ infrastructure code to support RapidIO interconnect devices. ++ ++source "drivers/rapidio/Kconfig" ++ ++endmenu ++ ++ ++menu "Executable file formats / Emulations" ++ ++source "fs/Kconfig.binfmt" ++ ++config IA32_EMULATION ++ bool "IA32 Emulation" ++ depends on X86_64 ++ select BINFMT_ELF ++ select COMPAT_BINFMT_ELF ++ select HAVE_UID16 ++ ---help--- ++ Include code to run legacy 32-bit programs under a ++ 64-bit kernel. You should likely turn this on, unless you're ++ 100% sure that you don't have any 32-bit programs left. ++ ++config IA32_AOUT ++ tristate "IA32 a.out support" ++ depends on IA32_EMULATION ++ ---help--- ++ Support old a.out binaries in the 32bit emulation. ++ ++config X86_X32 ++ bool "x32 ABI for 64-bit mode" ++ depends on X86_64 && IA32_EMULATION ++ ---help--- ++ Include code to run binaries for the x32 native 32-bit ABI ++ for 64-bit processors. An x32 process gets access to the ++ full 64-bit register file and wide data path while leaving ++ pointers at 32 bits for smaller memory footprint. ++ ++ You will need a recent binutils (2.22 or later) with ++ elf32_x86_64 support enabled to compile a kernel with this ++ option set. ++ ++config COMPAT ++ def_bool y ++ depends on IA32_EMULATION || X86_X32 ++ select ARCH_WANT_OLD_COMPAT_IPC ++ ++if COMPAT ++config COMPAT_FOR_U64_ALIGNMENT ++ def_bool y ++ ++config SYSVIPC_COMPAT ++ def_bool y ++ depends on SYSVIPC ++ ++config KEYS_COMPAT ++ def_bool y ++ depends on KEYS ++endif ++ ++endmenu ++ ++ ++config HAVE_ATOMIC_IOMAP ++ def_bool y ++ depends on X86_32 ++ ++config HAVE_TEXT_POKE_SMP ++ bool ++ select STOP_MACHINE if SMP ++ ++config X86_DEV_DMA_OPS ++ bool ++ depends on X86_64 || STA2X11 ++ ++config X86_DMA_REMAP ++ bool ++ depends on STA2X11 ++ ++source "net/Kconfig" ++ ++source "drivers/Kconfig" ++ ++source "drivers/firmware/Kconfig" ++ ++source "fs/Kconfig" ++ ++source "arch/x86/Kconfig.debug" ++ ++source "security/Kconfig" ++ ++source "crypto/Kconfig" ++ ++source "arch/x86/kvm/Kconfig" ++ ++source "lib/Kconfig" -- cgit v1.2.3