From e874f84fdb6eb83d905a72b35d87398374594b97 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Fri, 5 Jun 2009 19:58:50 +0200 Subject: more regressions found at runtime on alic1c --- .../patches/010-use_target_for_configuration.patch | 20 - package/ppp/patches/100-debian_close_dev_ppp.patch | 34 - package/ppp/patches/200-makefile.patch | 44 - package/ppp/patches/201-mppe_mppc_1.1.patch | 1587 -------------------- package/ppp/patches/203-no_strip.patch | 86 -- package/ppp/patches/204-opt_flags.patch | 26 - package/ppp/patches/206-radius_config.patch | 39 - .../ppp/patches/208-no_exponential_timeout.patch | 28 - .../ppp/patches/209-compensate_time_change.patch | 82 - package/ppp/patches/320-use_target_ar.patch | 24 - package/ppp/patches/patch-chat_Makefile_linux | 11 + package/ppp/patches/patch-configure | 15 + package/ppp/patches/patch-include_linux_ppp-comp_h | 63 + package/ppp/patches/patch-include_net_ppp-comp_h | 36 + package/ppp/patches/patch-pppd_Makefile_linux | 61 + package/ppp/patches/patch-pppd_ccp_c | 1362 +++++++++++++++++ package/ppp/patches/patch-pppd_ccp_h | 20 + package/ppp/patches/patch-pppd_chap_ms_c | 22 + package/ppp/patches/patch-pppd_main_c | 81 + .../patch-pppd_plugins_radius_Makefile_linux | 34 + ...patch-pppd_plugins_radius_etc_radiusclient_conf | 38 + .../patch-pppd_plugins_rp-pppoe_Makefile_linux | 23 + .../patch-pppd_plugins_rp-pppoe_discovery_c | 27 + package/ppp/patches/patch-pppd_pppd_8 | 77 + package/ppp/patches/patch-pppd_sys-linux_c | 16 + package/ppp/patches/patch-pppdump_Makefile_linux | 19 + package/ppp/patches/patch-pppstats_Makefile_linux | 11 + 27 files changed, 1916 insertions(+), 1970 deletions(-) delete mode 100644 package/ppp/patches/010-use_target_for_configuration.patch delete mode 100644 package/ppp/patches/100-debian_close_dev_ppp.patch delete mode 100644 package/ppp/patches/200-makefile.patch delete mode 100644 package/ppp/patches/201-mppe_mppc_1.1.patch delete mode 100644 package/ppp/patches/203-no_strip.patch delete mode 100644 package/ppp/patches/204-opt_flags.patch delete mode 100644 package/ppp/patches/206-radius_config.patch delete mode 100644 package/ppp/patches/208-no_exponential_timeout.patch delete mode 100644 package/ppp/patches/209-compensate_time_change.patch delete mode 100644 package/ppp/patches/320-use_target_ar.patch create mode 100644 package/ppp/patches/patch-chat_Makefile_linux create mode 100644 package/ppp/patches/patch-configure create mode 100644 package/ppp/patches/patch-include_linux_ppp-comp_h create mode 100644 package/ppp/patches/patch-include_net_ppp-comp_h create mode 100644 package/ppp/patches/patch-pppd_Makefile_linux create mode 100644 package/ppp/patches/patch-pppd_ccp_c create mode 100644 package/ppp/patches/patch-pppd_ccp_h create mode 100644 package/ppp/patches/patch-pppd_chap_ms_c create mode 100644 package/ppp/patches/patch-pppd_main_c create mode 100644 package/ppp/patches/patch-pppd_plugins_radius_Makefile_linux create mode 100644 package/ppp/patches/patch-pppd_plugins_radius_etc_radiusclient_conf create mode 100644 package/ppp/patches/patch-pppd_plugins_rp-pppoe_Makefile_linux create mode 100644 package/ppp/patches/patch-pppd_plugins_rp-pppoe_discovery_c create mode 100644 package/ppp/patches/patch-pppd_pppd_8 create mode 100644 package/ppp/patches/patch-pppd_sys-linux_c create mode 100644 package/ppp/patches/patch-pppdump_Makefile_linux create mode 100644 package/ppp/patches/patch-pppstats_Makefile_linux (limited to 'package/ppp/patches') diff --git a/package/ppp/patches/010-use_target_for_configuration.patch b/package/ppp/patches/010-use_target_for_configuration.patch deleted file mode 100644 index 0b804694b..000000000 --- a/package/ppp/patches/010-use_target_for_configuration.patch +++ /dev/null @@ -1,20 +0,0 @@ -$Id$ - - Use values exported from $(TOPDIR)/rules.mk for determining - the target system instead of the host configuration, d'oh - ---- ppp-2.4.3/configure.orig Sat Nov 6 11:36:32 2004 -+++ ppp-2.4.3/configure Sun Jun 18 23:40:46 2006 -@@ -8,9 +8,9 @@ SYSCONF=/etc - # if [ -d /NextApps ]; then - # system="NeXTStep" - # else -- system=`uname -s` -- release=`uname -r` -- arch=`uname -m` -+ system=${UNAME_S:-`uname -s`} -+ release=${UNAME_R:-`uname -r`} -+ arch=${UNAME_M:-`uname -m`} - # fi - state="unknown" - diff --git a/package/ppp/patches/100-debian_close_dev_ppp.patch b/package/ppp/patches/100-debian_close_dev_ppp.patch deleted file mode 100644 index 4e50118e8..000000000 --- a/package/ppp/patches/100-debian_close_dev_ppp.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: Simon Peter -Subject: Bug#306261: pppd does not properly close /dev/ppp on persist - -When using the kernel PPPoE driver, pppd never -closes /dev/ppp when the link has come down. - -It opens superfluous fds to the device each time it re-opens the -connection, with the unclosed ones falsely reported always ready for -data by select(). - -This makes pppd eat up 100% CPU time after the first persist because of -the always instantly returning select() on the unclosed fds. - -The problem also occurs with the upstream version, but does not occur -when a pty/tty device is used for the ppp connection. - - -diff -u -r ppp-2.4.3/pppd/sys-linux.c ppp-2.4.3/pppd/sys-linux.c ---- ppp-2.4.3/pppd/sys-linux.c 2005-04-29 20:08:37.000000000 +0200 -+++ ppp-2.4.3/pppd/sys-linux.c 2005-04-29 20:07:03.000000000 +0200 -@@ -455,6 +455,13 @@ - if (new_style_driver) { - int flags; - -+ /* if a ppp_fd is already open, close it first */ -+ if(ppp_fd > 0) { -+ close(ppp_fd); -+ remove_fd(ppp_fd); -+ ppp_fd = -1; -+ } -+ - /* Open an instance of /dev/ppp and connect the channel to it */ - if (ioctl(fd, PPPIOCGCHAN, &chindex) == -1) { - error("Couldn't get channel number: %m"); diff --git a/package/ppp/patches/200-makefile.patch b/package/ppp/patches/200-makefile.patch deleted file mode 100644 index df0f08e44..000000000 --- a/package/ppp/patches/200-makefile.patch +++ /dev/null @@ -1,44 +0,0 @@ -diff -Nur ppp-2.4.4.orig/pppd/Makefile.linux ppp-2.4.4/pppd/Makefile.linux ---- ppp-2.4.4.orig/pppd/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 -+++ ppp-2.4.4/pppd/Makefile.linux 2007-10-04 08:53:26.000000000 +0200 -@@ -48,7 +48,7 @@ - # Uncomment the next line to include support for PPP packet filtering. - # This requires that the libpcap library and headers be installed - # and that the kernel driver support PPP packet filtering. --FILTER=y -+#FILTER=y - - # Uncomment the next line to enable multilink PPP (enabled by default) - # Linux distributions: Please leave multilink ENABLED in your builds -@@ -58,9 +58,9 @@ - # Uncomment the next line to enable the TDB database (enabled by default.) - # If you enable multilink, then TDB is automatically enabled also. - # Linux distributions: Please leave TDB ENABLED in your builds. --USE_TDB=y -+#USE_TDB=y - --HAS_SHADOW=y -+#HAS_SHADOW=y - #USE_PAM=y - #HAVE_INET6=y - -@@ -77,7 +77,7 @@ - - INCLUDE_DIRS= -I../include - --COMPILE_FLAGS= -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MMAP -+COMPILE_FLAGS= -DHAVE_PATHS_H -DHAVE_MMAP - - CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS) '-DDESTDIR="@DESTDIR@"' - -@@ -117,10 +117,8 @@ - #LIBS += -lshadow $(LIBS) - endif - --ifneq ($(wildcard /usr/include/crypt.h),) - CFLAGS += -DHAVE_CRYPT_H=1 - LIBS += -lcrypt --endif - - ifdef NEEDDES - ifndef USE_CRYPT diff --git a/package/ppp/patches/201-mppe_mppc_1.1.patch b/package/ppp/patches/201-mppe_mppc_1.1.patch deleted file mode 100644 index c315656a2..000000000 --- a/package/ppp/patches/201-mppe_mppc_1.1.patch +++ /dev/null @@ -1,1587 +0,0 @@ -diff -ruN ppp-2.4.3.orig/include/linux/ppp-comp.h ppp-2.4.3/include/linux/ppp-comp.h ---- ppp-2.4.3.orig/include/linux/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100 -+++ ppp-2.4.3/include/linux/ppp-comp.h 2004-11-21 13:54:09.000000000 +0100 -@@ -36,7 +36,7 @@ - */ - - /* -- * ==FILEVERSION 20020319== -+ * ==FILEVERSION 20020715== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. -@@ -86,7 +86,7 @@ - - /* Compress a packet */ - int (*compress) (void *state, unsigned char *rptr, -- unsigned char *obuf, int isize, int osize); -+ unsigned char *obuf, int isize, int osize); - - /* Return compression statistics */ - void (*comp_stat) (void *state, struct compstat *stats); -@@ -107,7 +107,7 @@ - - /* Decompress a packet. */ - int (*decompress) (void *state, unsigned char *ibuf, int isize, -- unsigned char *obuf, int osize); -+ unsigned char *obuf, int osize); - - /* Update state for an incompressible packet received */ - void (*incomp) (void *state, unsigned char *ibuf, int icnt); -@@ -288,6 +288,33 @@ - opts |= MPPE_OPT_UNKNOWN; \ - } while (/* CONSTCOND */ 0) - -+/* MPPE/MPPC definitions by J.D.*/ -+#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */ -+#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */ -+#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */ -+#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */ -+#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */ -+ -+/* -+ * Definitions for Stac LZS. -+ */ -+ -+#define CI_LZS 17 /* config option for Stac LZS */ -+#define CILEN_LZS 5 /* length of config option */ -+ -+#define LZS_OVHD 4 /* max. LZS overhead */ -+#define LZS_HIST_LEN 2048 /* LZS history size */ -+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define LZS_MODE_NONE 0 -+#define LZS_MODE_LCB 1 -+#define LZS_MODE_CRC 2 -+#define LZS_MODE_SEQ 3 -+#define LZS_MODE_EXT 4 -+ -+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ -+#define LZS_EXT_BIT_COMP 0x20 /* bit C */ -+ - /* - * Definitions for other, as yet unsupported, compression methods. - */ -diff -ruN ppp-2.4.3.orig/include/net/ppp-comp.h ppp-2.4.3/include/net/ppp-comp.h ---- ppp-2.4.3.orig/include/net/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100 -+++ ppp-2.4.3/include/net/ppp-comp.h 2004-11-21 13:54:09.000000000 +0100 -@@ -255,6 +255,33 @@ - opts |= MPPE_OPT_UNKNOWN; \ - } while (/* CONSTCOND */ 0) - -+/* MPPE/MPPC definitions by J.D.*/ -+#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */ -+#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */ -+#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */ -+#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */ -+#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */ -+ -+/* -+ * Definitions for Stac LZS. -+ */ -+ -+#define CI_LZS 17 /* config option for Stac LZS */ -+#define CILEN_LZS 5 /* length of config option */ -+ -+#define LZS_OVHD 4 /* max. LZS overhead */ -+#define LZS_HIST_LEN 2048 /* LZS history size */ -+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define LZS_MODE_NONE 0 -+#define LZS_MODE_LCB 1 -+#define LZS_MODE_CRC 2 -+#define LZS_MODE_SEQ 3 -+#define LZS_MODE_EXT 4 -+ -+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ -+#define LZS_EXT_BIT_COMP 0x20 /* bit C */ -+ - /* - * Definitions for other, as yet unsupported, compression methods. - */ ---- ppp-2.4.4/pppd/ccp.c.orig 2005-07-09 02:23:05.000000000 +0200 -+++ ppp-2.4.4/pppd/ccp.c 2006-07-21 23:34:12.121546000 +0200 -@@ -62,12 +62,10 @@ - static char bsd_value[8]; - static char deflate_value[8]; - --/* -- * Option variables. -- */ - #ifdef MPPE --bool refuse_mppe_stateful = 1; /* Allow stateful mode? */ --#endif -+static int setmppe(char **); -+static int setnomppe(void); -+#endif /* MPPE */ - - static option_t ccp_option_list[] = { - { "noccp", o_bool, &ccp_protent.enabled_flag, -@@ -108,54 +106,36 @@ - "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, - &ccp_allowoptions[0].predictor_1 }, - -+ { "lzs", o_bool, &ccp_wantoptions[0].lzs, -+ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_PRIO }, -+ { "+lzs", o_bool, &ccp_wantoptions[0].lzs, -+ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_ALIAS | OPT_PRIO }, -+ { "nolzs", o_bool, &ccp_wantoptions[0].lzs, -+ "don't allow Stac LZS", OPT_PRIOSUB | OPT_A2CLR, -+ &ccp_allowoptions[0].lzs }, -+ { "-lzs", o_bool, &ccp_wantoptions[0].lzs, -+ "don't allow Stac LZS", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, -+ &ccp_allowoptions[0].lzs }, -+ - #ifdef MPPE -- /* MPPE options are symmetrical ... we only set wantoptions here */ -- { "require-mppe", o_bool, &ccp_wantoptions[0].mppe, -- "require MPPE encryption", -- OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, -- { "+mppe", o_bool, &ccp_wantoptions[0].mppe, -- "require MPPE encryption", -- OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, -- { "nomppe", o_bool, &ccp_wantoptions[0].mppe, -- "don't allow MPPE encryption", OPT_PRIO }, -- { "-mppe", o_bool, &ccp_wantoptions[0].mppe, -- "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO }, -- -- /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */ -- { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe, -- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, -- &ccp_wantoptions[0].mppe }, -- { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe, -- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, -- &ccp_wantoptions[0].mppe }, -- { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe, -- "don't allow MPPE 40-bit encryption", -- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe }, -- { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe, -- "don't allow MPPE 40-bit encryption", -- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, -- &ccp_wantoptions[0].mppe }, -- -- { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe, -- "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128, -- &ccp_wantoptions[0].mppe }, -- { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe, -- "require MPPE 128-bit encryption", -- OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128, -- &ccp_wantoptions[0].mppe }, -- { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe, -- "don't allow MPPE 128-bit encryption", -- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe }, -- { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe, -- "don't allow MPPE 128-bit encryption", -- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, -- &ccp_wantoptions[0].mppe }, -- -- /* strange one; we always request stateless, but will we allow stateful? */ -- { "mppe-stateful", o_bool, &refuse_mppe_stateful, -- "allow MPPE stateful mode", OPT_PRIO }, -- { "nomppe-stateful", o_bool, &refuse_mppe_stateful, -- "disallow MPPE stateful mode", OPT_PRIO | 1 }, -+ { "mppc", o_bool, &ccp_wantoptions[0].mppc, -+ "request MPPC compression", 1, &ccp_allowoptions[0].mppc }, -+ { "+mppc", o_bool, &ccp_wantoptions[0].mppc, -+ "request MPPC compression", 1, &ccp_allowoptions[0].mppc, OPT_ALIAS }, -+ { "nomppc", o_bool, &ccp_wantoptions[0].mppc, -+ "don't allow MPPC compression", OPT_PRIOSUB | OPT_A2CLR, -+ &ccp_allowoptions[0].mppc }, -+ { "-mppc", o_bool, &ccp_wantoptions[0].mppc, -+ "don't allow MPPC compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, -+ &ccp_allowoptions[0].mppc }, -+ { "mppe", o_special, (void *)setmppe, -+ "request MPPE encryption" }, -+ { "+mppe", o_special, (void *)setmppe, -+ "request MPPE encryption" }, -+ { "nomppe", o_special_noarg, (void *)setnomppe, -+ "don't allow MPPE encryption" }, -+ { "-mppe", o_special_noarg, (void *)setnomppe, -+ "don't allow MPPE encryption" }, - #endif /* MPPE */ - - { NULL } -@@ -241,7 +221,7 @@ - */ - #define ANY_COMPRESS(opt) ((opt).deflate || (opt).bsd_compress \ - || (opt).predictor_1 || (opt).predictor_2 \ -- || (opt).mppe) -+ || (opt).lzs || (opt).mppc || (opt).mppe) - - /* - * Local state (mainly for handling reset-reqs and reset-acks). -@@ -344,6 +324,100 @@ - return 1; - } - -+#ifdef MPPE -+/* -+ * Functions called from config options -+ */ -+/* -+ MPPE suboptions: -+ required - require MPPE; disconnect if peer doesn't support it -+ stateless - use stateless mode -+ no40 - disable 40 bit keys -+ no56 - disable 56 bit keys -+ no128 - disable 128 bit keys -+*/ -+int setmppe(char **argv) -+{ -+ int i; -+ char *str, cmdbuf[16]; -+ -+ ccp_allowoptions[0].mppe = 1; -+ ccp_allowoptions[0].mppe_40 = 1; -+ ccp_allowoptions[0].mppe_56 = 1; -+ ccp_allowoptions[0].mppe_128 = 1; -+ ccp_allowoptions[0].mppe_stateless = 0; -+ ccp_wantoptions[0].mppe = 0; -+ -+ str = *argv; -+ -+ while (1) { -+ i = 0; -+ memset(cmdbuf, '\0', 16); -+ while ((i < 16) && (*str != ',') && (*str != '\0')) -+ cmdbuf[i++] = *str++; -+ cmdbuf[i] = '\0'; -+ if (!strncasecmp(cmdbuf, "no40", strlen("no40"))) { -+ ccp_allowoptions[0].mppe_40 = 0; -+ goto next_param; -+ } else if (!strncasecmp(cmdbuf, "no56", strlen("no56"))) { -+ ccp_allowoptions[0].mppe_56 = 0; -+ goto next_param; -+ } else if (!strncasecmp(cmdbuf, "no128", strlen("no128"))) { -+ ccp_allowoptions[0].mppe_128 = 0; -+ goto next_param; -+ } else if (!strncasecmp(cmdbuf, "stateless", strlen("stateless"))) { -+ ccp_allowoptions[0].mppe_stateless = 1; -+ goto next_param; -+ } else if (!strncasecmp(cmdbuf, "required", strlen("required"))) { -+ ccp_wantoptions[0].mppe = 1; -+ goto next_param; -+ } else { -+ option_error("invalid parameter '%s' for mppe option", cmdbuf); -+ return 0; -+ } -+ -+ next_param: -+ if (*str == ',') { -+ str++; -+ continue; -+ } -+ if (*str == '\0') { -+ if (!(ccp_allowoptions[0].mppe_40 || ccp_allowoptions[0].mppe_56 || -+ ccp_allowoptions[0].mppe_128)) { -+ if (ccp_wantoptions[0].mppe == 1) { -+ option_error("You require MPPE but you have switched off " -+ "all encryption key lengths."); -+ return 0; -+ } -+ ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0; -+ ccp_wantoptions[0].mppe_stateless = -+ ccp_allowoptions[0].mppe_stateless = 0; -+ } else { -+ ccp_allowoptions[0].mppe = 1; -+ ccp_wantoptions[0].mppe_stateless = -+ ccp_allowoptions[0].mppe_stateless; -+ if (ccp_wantoptions[0].mppe == 1) { -+ ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40; -+ ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56; -+ ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128; -+ } -+ } -+ return 1; -+ } -+ } -+} -+ -+int setnomppe(void) -+{ -+ ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0; -+ ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40 = 0; -+ ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56 = 0; -+ ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128 = 0; -+ ccp_wantoptions[0].mppe_stateless = ccp_allowoptions[0].mppe_stateless = 0; -+ return 1; -+} -+#endif /* MPPE */ -+ - /* - * ccp_init - initialize CCP. - */ -@@ -378,6 +452,30 @@ - ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS; - - ccp_allowoptions[0].predictor_1 = 1; -+ -+ ccp_wantoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */ -+ ccp_wantoptions[0].lzs_mode = LZS_MODE_SEQ; -+ ccp_wantoptions[0].lzs_hists = 1; -+ ccp_allowoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */ -+ ccp_allowoptions[0].lzs_mode = LZS_MODE_SEQ; -+ ccp_allowoptions[0].lzs_hists = 1; -+ -+#ifdef MPPE -+ /* by default allow and request MPPC... */ -+ ccp_wantoptions[0].mppc = ccp_allowoptions[0].mppc = 1; -+ -+ /* ... and allow but don't request MPPE */ -+ ccp_allowoptions[0].mppe = 1; -+ ccp_allowoptions[0].mppe_40 = 1; -+ ccp_allowoptions[0].mppe_56 = 1; -+ ccp_allowoptions[0].mppe_128 = 1; -+ ccp_allowoptions[0].mppe_stateless = 1; -+ ccp_wantoptions[0].mppe = 0; -+ ccp_wantoptions[0].mppe_40 = 0; -+ ccp_wantoptions[0].mppe_56 = 0; -+ ccp_wantoptions[0].mppe_128 = 0; -+ ccp_wantoptions[0].mppe_stateless = 0; -+#endif /* MPPE */ - } - - /* -@@ -455,11 +553,11 @@ - if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED) { - notice("Compression disabled by peer."); - #ifdef MPPE -- if (ccp_gotoptions[unit].mppe) { -+ if (ccp_wantoptions[unit].mppe) { - error("MPPE disabled, closing LCP"); - lcp_close(unit, "MPPE disabled by peer"); - } --#endif -+#endif /* MPPE */ - } - - /* -@@ -487,6 +585,15 @@ - break; - /* send a reset-ack, which the transmitter will see and - reset its compression state. */ -+ -+ /* In case of MPPE/MPPC or LZS we shouldn't send CCP_RESETACK, -+ but we do it in order to reset compressor; CCP_RESETACK is -+ then silently discarded. See functions ppp_send_frame and -+ ppp_ccp_peek in ppp_generic.c (Linux only !!!). All the -+ confusion is caused by the fact that CCP code is splited -+ into two parts - one part is handled by pppd, the other one -+ is handled by kernel. */ -+ - fsm_sdata(f, CCP_RESETACK, id, NULL, 0); - break; - -@@ -515,12 +622,11 @@ - fsm_lowerdown(&ccp_fsm[unit]); - - #ifdef MPPE -- if (ccp_gotoptions[unit].mppe) { -+ if (ccp_wantoptions[unit].mppe) { - error("MPPE required but peer negotiation failed"); - lcp_close(unit, "MPPE required but peer negotiation failed"); - } --#endif -- -+#endif /* MPPE */ - } - - /* -@@ -537,7 +643,7 @@ - all_rejected[f->unit] = 0; - - #ifdef MPPE -- if (go->mppe) { -+ if (go->mppe || go->mppc) { - ccp_options *ao = &ccp_allowoptions[f->unit]; - int auth_mschap_bits = auth_done[f->unit]; - int numbits; -@@ -551,80 +657,109 @@ - * NB: If MPPE is required, all other compression opts are invalid. - * So, we return right away if we can't do it. - */ -+ if (ccp_wantoptions[f->unit].mppe) { -+ /* Leave only the mschap auth bits set */ -+ auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER | -+ CHAP_MS2_WITHPEER | CHAP_MS2_PEER); -+ /* Count the mschap auths */ -+ auth_mschap_bits >>= CHAP_MS_SHIFT; -+ numbits = 0; -+ do { -+ numbits += auth_mschap_bits & 1; -+ auth_mschap_bits >>= 1; -+ } while (auth_mschap_bits); -+ if (numbits > 1) { -+ error("MPPE required, but auth done in both directions."); -+ lcp_close(f->unit, "MPPE required but not available"); -+ return; -+ } -+ if (!numbits) { -+ error("MPPE required, but MS-CHAP[v2] auth not performed."); -+ lcp_close(f->unit, "MPPE required but not available"); -+ return; -+ } - -- /* Leave only the mschap auth bits set */ -- auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER | -- CHAP_MS2_WITHPEER | CHAP_MS2_PEER); -- /* Count the mschap auths */ -- auth_mschap_bits >>= CHAP_MS_SHIFT; -- numbits = 0; -- do { -- numbits += auth_mschap_bits & 1; -- auth_mschap_bits >>= 1; -- } while (auth_mschap_bits); -- if (numbits > 1) { -- error("MPPE required, but auth done in both directions."); -- lcp_close(f->unit, "MPPE required but not available"); -- return; -- } -- if (!numbits) { -- error("MPPE required, but MS-CHAP[v2] auth not performed."); -- lcp_close(f->unit, "MPPE required but not available"); -- return; -- } -- -- /* A plugin (eg radius) may not have obtained key material. */ -- if (!mppe_keys_set) { -- error("MPPE required, but keys are not available. " -- "Possible plugin problem?"); -- lcp_close(f->unit, "MPPE required but not available"); -- return; -- } -- -- /* LM auth not supported for MPPE */ -- if (auth_done[f->unit] & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) { -- /* This might be noise */ -- if (go->mppe & MPPE_OPT_40) { -- notice("Disabling 40-bit MPPE; MS-CHAP LM not supported"); -- go->mppe &= ~MPPE_OPT_40; -- ccp_wantoptions[f->unit].mppe &= ~MPPE_OPT_40; -+ /* A plugin (eg radius) may not have obtained key material. */ -+ if (!mppe_keys_set) { -+ error("MPPE required, but keys are not available. " -+ "Possible plugin problem?"); -+ lcp_close(f->unit, "MPPE required but not available"); -+ return; - } - } - -- /* Last check: can we actually negotiate something? */ -- if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) { -- /* Could be misconfig, could be 40-bit disabled above. */ -- error("MPPE required, but both 40-bit and 128-bit disabled."); -- lcp_close(f->unit, "MPPE required but not available"); -- return; -+ /* -+ * Check whether the kernel knows about the various -+ * compression methods we might request. Key material -+ * unimportant here. -+ */ -+ if (go->mppc) { -+ opt_buf[0] = CI_MPPE; -+ opt_buf[1] = CILEN_MPPE; -+ opt_buf[2] = 0; -+ opt_buf[3] = 0; -+ opt_buf[4] = 0; -+ opt_buf[5] = MPPE_MPPC; -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 0) <= 0) -+ go->mppc = 0; -+ } -+ if (go->mppe_40) { -+ opt_buf[0] = CI_MPPE; -+ opt_buf[1] = CILEN_MPPE; -+ opt_buf[2] = MPPE_STATELESS; -+ opt_buf[3] = 0; -+ opt_buf[4] = 0; -+ opt_buf[5] = MPPE_40BIT; -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) -+ go->mppe_40 = 0; -+ } -+ if (go->mppe_56) { -+ opt_buf[0] = CI_MPPE; -+ opt_buf[1] = CILEN_MPPE; -+ opt_buf[2] = MPPE_STATELESS; -+ opt_buf[3] = 0; -+ opt_buf[4] = 0; -+ opt_buf[5] = MPPE_56BIT; -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) -+ go->mppe_56 = 0; -+ } -+ if (go->mppe_128) { -+ opt_buf[0] = CI_MPPE; -+ opt_buf[1] = CILEN_MPPE; -+ opt_buf[2] = MPPE_STATELESS; -+ opt_buf[3] = 0; -+ opt_buf[4] = 0; -+ opt_buf[5] = MPPE_128BIT; -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) -+ go->mppe_128 = 0; -+ } -+ if (!go->mppe_40 && !go->mppe_56 && !go->mppe_128) { -+ if (ccp_wantoptions[f->unit].mppe) { -+ error("MPPE required, but kernel has no support."); -+ lcp_close(f->unit, "MPPE required but not available"); -+ } -+ go->mppe = go->mppe_stateless = 0; -+ } else { -+ /* MPPE is not compatible with other compression types */ -+ if (ccp_wantoptions[f->unit].mppe) { -+ ao->bsd_compress = go->bsd_compress = 0; -+ ao->predictor_1 = go->predictor_1 = 0; -+ ao->predictor_2 = go->predictor_2 = 0; -+ ao->deflate = go->deflate = 0; -+ ao->lzs = go->lzs = 0; -+ } - } -- -- /* sync options */ -- ao->mppe = go->mppe; -- /* MPPE is not compatible with other compression types */ -- ao->bsd_compress = go->bsd_compress = 0; -- ao->predictor_1 = go->predictor_1 = 0; -- ao->predictor_2 = go->predictor_2 = 0; -- ao->deflate = go->deflate = 0; - } - #endif /* MPPE */ -- -- /* -- * Check whether the kernel knows about the various -- * compression methods we might request. -- */ --#ifdef MPPE -- if (go->mppe) { -- opt_buf[0] = CI_MPPE; -- opt_buf[1] = CILEN_MPPE; -- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); -- /* Key material unimportant here. */ -- if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) { -- error("MPPE required, but kernel has no support."); -- lcp_close(f->unit, "MPPE required but not available"); -- } -+ if (go->lzs) { -+ opt_buf[0] = CI_LZS; -+ opt_buf[1] = CILEN_LZS; -+ opt_buf[2] = go->lzs_hists >> 8; -+ opt_buf[3] = go->lzs_hists & 0xff; -+ opt_buf[4] = LZS_MODE_SEQ; -+ if (ccp_test(f->unit, opt_buf, CILEN_LZS, 0) <= 0) -+ go->lzs = 0; - } --#endif - if (go->bsd_compress) { - opt_buf[0] = CI_BSD_COMPRESS; - opt_buf[1] = CILEN_BSD_COMPRESS; -@@ -679,7 +814,8 @@ - + (go->deflate? CILEN_DEFLATE: 0) - + (go->predictor_1? CILEN_PREDICTOR_1: 0) - + (go->predictor_2? CILEN_PREDICTOR_2: 0) -- + (go->mppe? CILEN_MPPE: 0); -+ + (go->lzs? CILEN_LZS: 0) -+ + ((go->mppe || go->mppc)? CILEN_MPPE: 0); - } - - /* -@@ -693,6 +829,8 @@ - { - int res; - ccp_options *go = &ccp_gotoptions[f->unit]; -+ ccp_options *ao = &ccp_allowoptions[f->unit]; -+ ccp_options *wo = &ccp_wantoptions[f->unit]; - u_char *p0 = p; - - /* -@@ -701,22 +839,43 @@ - * in case it gets Acked. - */ - #ifdef MPPE -- if (go->mppe) { -+ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) { - u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; - -- p[0] = opt_buf[0] = CI_MPPE; -- p[1] = opt_buf[1] = CILEN_MPPE; -- MPPE_OPTS_TO_CI(go->mppe, &p[2]); -- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); -+ p[0] = CI_MPPE; -+ p[1] = CILEN_MPPE; -+ p[2] = (go->mppe_stateless ? MPPE_STATELESS : 0); -+ p[3] = 0; -+ p[4] = 0; -+ p[5] = (go->mppe_40 ? MPPE_40BIT : 0) | (go->mppe_56 ? MPPE_56BIT : 0) | -+ (go->mppe_128 ? MPPE_128BIT : 0) | (go->mppc ? MPPE_MPPC : 0); -+ -+ BCOPY(p, opt_buf, CILEN_MPPE); - BCOPY(mppe_recv_key, &opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN); - res = ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0); -- if (res > 0) -+ if (res > 0) { - p += CILEN_MPPE; -- else -+ } else { - /* This shouldn't happen, we've already tested it! */ -- lcp_close(f->unit, "MPPE required but not available in kernel"); -+ go->mppe = go->mppe_40 = go->mppe_56 = go->mppe_128 = -+ go->mppe_stateless = go->mppc = 0; -+ if (ccp_wantoptions[f->unit].mppe) -+ lcp_close(f->unit, "MPPE required but not available in kernel"); -+ } -+ } -+#endif /* MPPE */ -+ if (go->lzs) { -+ p[0] = CI_LZS; -+ p[1] = CILEN_LZS; -+ p[2] = go->lzs_hists >> 8; -+ p[3] = go->lzs_hists & 0xff; -+ p[4] = LZS_MODE_SEQ; -+ res = ccp_test(f->unit, p, CILEN_LZS, 0); -+ if (res > 0) { -+ p += CILEN_LZS; -+ } else -+ go->lzs = 0; - } --#endif - if (go->deflate) { - p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT; - p[1] = CILEN_DEFLATE; -@@ -802,7 +961,7 @@ - - /* - * ccp_ackci - process a received configure-ack, and return -- * 1 iff the packet was OK. -+ * 1 if the packet was OK. - */ - static int - ccp_ackci(f, p, len) -@@ -811,24 +970,44 @@ - int len; - { - ccp_options *go = &ccp_gotoptions[f->unit]; -+ ccp_options *ao = &ccp_allowoptions[f->unit]; -+ ccp_options *wo = &ccp_wantoptions[f->unit]; - u_char *p0 = p; - - #ifdef MPPE -- if (go->mppe) { -- u_char opt_buf[CILEN_MPPE]; -- -- opt_buf[0] = CI_MPPE; -- opt_buf[1] = CILEN_MPPE; -- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); -- if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE)) -+ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) { -+ if (len < CILEN_MPPE -+ || p[1] != CILEN_MPPE || p[0] != CI_MPPE -+ || p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) -+ || p[3] != 0 -+ || p[4] != 0 -+ || (p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) | -+ (go->mppc ? MPPE_MPPC : 0)) -+ && p[5] != ((go->mppe_56 ? MPPE_56BIT : 0) | -+ (go->mppc ? MPPE_MPPC : 0)) -+ && p[5] != ((go->mppe_128 ? MPPE_128BIT : 0) | -+ (go->mppc ? MPPE_MPPC : 0)))) - return 0; -+ if (go->mppe_40 || go->mppe_56 || go->mppe_128) -+ go->mppe = 1; - p += CILEN_MPPE; - len -= CILEN_MPPE; -+ /* Cope with first/fast ack */ -+ if (p == p0 && len == 0) -+ return 1; -+ } -+#endif /* MPPE */ -+ if (go->lzs) { -+ if (len < CILEN_LZS || p[0] != CI_LZS || p[1] != CILEN_LZS -+ || p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff) -+ || p[4] != LZS_MODE_SEQ) -+ return 0; -+ p += CILEN_LZS; -+ len -= CILEN_LZS; - /* XXX Cope with first/fast ack */ -- if (len == 0) -+ if (p == p0 && len == 0) - return 1; - } --#endif - if (go->deflate) { - if (len < CILEN_DEFLATE - || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) -@@ -891,7 +1070,7 @@ - - /* - * ccp_nakci - process received configure-nak. -- * Returns 1 iff the nak was OK. -+ * Returns 1 if the nak was OK. - */ - static int - ccp_nakci(f, p, len, treat_as_reject) -@@ -901,6 +1080,8 @@ - int treat_as_reject; - { - ccp_options *go = &ccp_gotoptions[f->unit]; -+ ccp_options *ao = &ccp_allowoptions[f->unit]; -+ ccp_options *wo = &ccp_wantoptions[f->unit]; - ccp_options no; /* options we've seen already */ - ccp_options try; /* options to ask for next time */ - -@@ -908,28 +1089,100 @@ - try = *go; - - #ifdef MPPE -- if (go->mppe && len >= CILEN_MPPE -- && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { -- no.mppe = 1; -- /* -- * Peer wants us to use a different strength or other setting. -- * Fail if we aren't willing to use his suggestion. -- */ -- MPPE_CI_TO_OPTS(&p[2], try.mppe); -- if ((try.mppe & MPPE_OPT_STATEFUL) && refuse_mppe_stateful) { -- error("Refusing MPPE stateful mode offered by peer"); -- try.mppe = 0; -- } else if (((go->mppe | MPPE_OPT_STATEFUL) & try.mppe) != try.mppe) { -- /* Peer must have set options we didn't request (suggest) */ -- try.mppe = 0; -- } -+ if ((go->mppe || go->mppc || (!wo->mppe && ao->mppe)) && -+ len >= CILEN_MPPE && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { - -- if (!try.mppe) { -- error("MPPE required but peer negotiation failed"); -- lcp_close(f->unit, "MPPE required but peer negotiation failed"); -+ if (go->mppc) { -+ no.mppc = 1; -+ if (!(p[5] & MPPE_MPPC)) -+ try.mppc = 0; -+ } -+ -+ if (go->mppe) -+ no.mppe = 1; -+ if (go->mppe_40) -+ no.mppe_40 = 1; -+ if (go->mppe_56) -+ no.mppe_56 = 1; -+ if (go->mppe_128) -+ no.mppe_128 = 1; -+ if (go->mppe_stateless) -+ no.mppe_stateless = 1; -+ -+ if (ao->mppe_40) { -+ if ((p[5] & MPPE_40BIT)) -+ try.mppe_40 = 1; -+ else -+ try.mppe_40 = (p[5] == 0) ? 1 : 0; -+ } -+ if (ao->mppe_56) { -+ if ((p[5] & MPPE_56BIT)) -+ try.mppe_56 = 1; -+ else -+ try.mppe_56 = (p[5] == 0) ? 1 : 0; -+ } -+ if (ao->mppe_128) { -+ if ((p[5] & MPPE_128BIT)) -+ try.mppe_128 = 1; -+ else -+ try.mppe_128 = (p[5] == 0) ? 1 : 0; -+ } -+ -+ if (ao->mppe_stateless) { -+ if ((p[2] & MPPE_STATELESS) || wo->mppe_stateless) -+ try.mppe_stateless = 1; -+ else -+ try.mppe_stateless = 0; -+ } -+ -+ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) { -+ try.mppe = try.mppe_stateless = 0; -+ if (wo->mppe) { -+ /* we require encryption, but peer doesn't support it -+ so we close connection */ -+ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = -+ wo->mppe_56 = wo->mppe_128 = 0; -+ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE " -+ "key length"); -+ } -+ } -+ if (wo->mppe && (wo->mppe_40 != try.mppe_40) && -+ (wo->mppe_56 != try.mppe_56) && (wo->mppe_128 != try.mppe_128)) { -+ /* cannot negotiate key length */ -+ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = -+ wo->mppe_56 = wo->mppe_128 = 0; -+ lcp_close(f->unit, "Cannot negotiate MPPE key length"); - } -+ if (try.mppe_40 && try.mppe_56 && try.mppe_128) -+ try.mppe_40 = try.mppe_56 = 0; -+ else -+ if (try.mppe_56 && try.mppe_128) -+ try.mppe_56 = 0; -+ else -+ if (try.mppe_40 && try.mppe_128) -+ try.mppe_40 = 0; -+ else -+ if (try.mppe_40 && try.mppe_56) -+ try.mppe_40 = 0; -+ -+ p += CILEN_MPPE; -+ len -= CILEN_MPPE; - } - #endif /* MPPE */ -+ -+ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) { -+ no.lzs = 1; -+ if (((p[2]<<8)|p[3]) > 1 || (p[4] != LZS_MODE_SEQ && -+ p[4] != LZS_MODE_EXT)) -+ try.lzs = 0; -+ else { -+ try.lzs_mode = p[4]; -+ try.lzs_hists = (p[2] << 8) | p[3]; -+ } -+ p += CILEN_LZS; -+ len -= CILEN_LZS; -+ } -+ - if (go->deflate && len >= CILEN_DEFLATE - && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) - && p[1] == CILEN_DEFLATE) { -@@ -1002,14 +1255,50 @@ - return -1; - - #ifdef MPPE -- if (go->mppe && len >= CILEN_MPPE -+ if ((go->mppe || go->mppc) && len >= CILEN_MPPE - && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { -- error("MPPE required but peer refused"); -- lcp_close(f->unit, "MPPE required but peer refused"); -+ ccp_options *wo = &ccp_wantoptions[f->unit]; -+ if (p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) || -+ p[3] != 0 || -+ p[4] != 0 || -+ p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) | -+ (go->mppe_56 ? MPPE_56BIT : 0) | -+ (go->mppe_128 ? MPPE_128BIT : 0) | -+ (go->mppc ? MPPE_MPPC : 0))) -+ return 0; -+ if (go->mppc) -+ try.mppc = 0; -+ if (go->mppe) { -+ try.mppe = 0; -+ if (go->mppe_40) -+ try.mppe_40 = 0; -+ if (go->mppe_56) -+ try.mppe_56 = 0; -+ if (go->mppe_128) -+ try.mppe_128 = 0; -+ if (go->mppe_stateless) -+ try.mppe_stateless = 0; -+ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) -+ try.mppe = try.mppe_stateless = 0; -+ if (wo->mppe) { /* we want MPPE but cannot negotiate key length */ -+ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = -+ wo->mppe_56 = wo->mppe_128 = 0; -+ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE " -+ "key length"); -+ } -+ } - p += CILEN_MPPE; - len -= CILEN_MPPE; - } --#endif -+#endif /* MPPE */ -+ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) { -+ if (p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff) -+ || p[4] != go->lzs_mode) -+ return 0; -+ try.lzs = 0; -+ p += CILEN_LZS; -+ len -= CILEN_LZS; -+ } - if (go->deflate_correct && len >= CILEN_DEFLATE - && p[0] == CI_DEFLATE && p[1] == CILEN_DEFLATE) { - if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size) -@@ -1073,14 +1362,15 @@ - int dont_nak; - { - int ret, newret, res; -- u_char *p0, *retp; -+ u_char *p0, *retp, p2, p5; - int len, clen, type, nb; - ccp_options *ho = &ccp_hisoptions[f->unit]; - ccp_options *ao = &ccp_allowoptions[f->unit]; -+ ccp_options *wo = &ccp_wantoptions[f->unit]; - #ifdef MPPE -- bool rej_for_ci_mppe = 1; /* Are we rejecting based on a bad/missing */ -- /* CI_MPPE, or due to other options? */ --#endif -+ u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; -+/* int mtu; */ -+#endif /* MPPE */ - - ret = CONFACK; - retp = p0 = p; -@@ -1103,106 +1393,307 @@ - switch (type) { - #ifdef MPPE - case CI_MPPE: -- if (!ao->mppe || clen != CILEN_MPPE) { -+ if ((!ao->mppc && !ao->mppe) || clen != CILEN_MPPE) { - newret = CONFREJ; - break; - } -- MPPE_CI_TO_OPTS(&p[2], ho->mppe); - -- /* Nak if anything unsupported or unknown are set. */ -- if (ho->mppe & MPPE_OPT_UNSUPPORTED) { -- newret = CONFNAK; -- ho->mppe &= ~MPPE_OPT_UNSUPPORTED; -- } -- if (ho->mppe & MPPE_OPT_UNKNOWN) { -+ p2 = p[2]; -+ p5 = p[5]; -+ /* not sure what they want, tell 'em what we got */ -+ if (((p[2] & ~MPPE_STATELESS) != 0 || p[3] != 0 || p[4] != 0 || -+ (p[5] & ~(MPPE_40BIT | MPPE_56BIT | MPPE_128BIT | -+ MPPE_MPPC)) != 0 || p[5] == 0) || -+ (p[2] == 0 && p[3] == 0 && p[4] == 0 && p[5] == 0)) { - newret = CONFNAK; -- ho->mppe &= ~MPPE_OPT_UNKNOWN; -+ p[2] = (wo->mppe_stateless ? MPPE_STATELESS : 0); -+ p[3] = 0; -+ p[4] = 0; -+ p[5] = (wo->mppe_40 ? MPPE_40BIT : 0) | -+ (wo->mppe_56 ? MPPE_56BIT : 0) | -+ (wo->mppe_128 ? MPPE_128BIT : 0) | -+ (wo->mppc ? MPPE_MPPC : 0); -+ break; - } - -- /* Check state opt */ -- if (ho->mppe & MPPE_OPT_STATEFUL) { -- /* -- * We can Nak and request stateless, but it's a -- * lot easier to just assume the peer will request -- * it if he can do it; stateful mode is bad over -- * the Internet -- which is where we expect MPPE. -- */ -- if (refuse_mppe_stateful) { -- error("Refusing MPPE stateful mode offered by peer"); -+ if ((p[5] & MPPE_MPPC)) { -+ if (ao->mppc) { -+ ho->mppc = 1; -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ opt_buf[2] = opt_buf[3] = opt_buf[4] = 0; -+ opt_buf[5] = MPPE_MPPC; -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 1) <= 0) { -+ ho->mppc = 0; -+ p[5] &= ~MPPE_MPPC; -+ newret = CONFNAK; -+ } -+ } else { - newret = CONFREJ; -- break; -+ if (wo->mppe || ao->mppe) { -+ p[5] &= ~MPPE_MPPC; -+ newret = CONFNAK; -+ } -+ } -+ } -+ -+ if (ao->mppe) -+ ho->mppe = 1; -+ -+ if ((p[2] & MPPE_STATELESS)) { -+ if (ao->mppe_stateless) { -+ if (wo->mppe_stateless) -+ ho->mppe_stateless = 1; -+ else { -+ newret = CONFNAK; -+ if (!dont_nak) -+ p[2] &= ~MPPE_STATELESS; -+ } -+ } else { -+ newret = CONFNAK; -+ if (!dont_nak) -+ p[2] &= ~MPPE_STATELESS; -+ } -+ } else { -+ if (wo->mppe_stateless && !dont_nak) { -+ wo->mppe_stateless = 0; -+ newret = CONFNAK; -+ p[2] |= MPPE_STATELESS; - } - } - -- /* Find out which of {S,L} are set. */ -- if ((ho->mppe & MPPE_OPT_128) -- && (ho->mppe & MPPE_OPT_40)) { -- /* Both are set, negotiate the strongest. */ -+ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT|MPPE_128BIT)) { - newret = CONFNAK; -- if (ao->mppe & MPPE_OPT_128) -- ho->mppe &= ~MPPE_OPT_40; -- else if (ao->mppe & MPPE_OPT_40) -- ho->mppe &= ~MPPE_OPT_128; -- else { -- newret = CONFREJ; -- break; -+ if (ao->mppe_128) { -+ ho->mppe_128 = 1; -+ p[5] &= ~(MPPE_40BIT|MPPE_56BIT); -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -+ MPPE_MAX_KEY_LEN); -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + -+ MPPE_MAX_KEY_LEN, 1) <= 0) { -+ ho->mppe_128 = 0; -+ p[5] |= (MPPE_40BIT|MPPE_56BIT); -+ p[5] &= ~MPPE_128BIT; -+ goto check_mppe_56_40; -+ } -+ goto check_mppe; - } -- } else if (ho->mppe & MPPE_OPT_128) { -- if (!(ao->mppe & MPPE_OPT_128)) { -- newret = CONFREJ; -- break; -+ p[5] &= ~MPPE_128BIT; -+ goto check_mppe_56_40; -+ } -+ if ((p[5] & ~MPPE_MPPC) == (MPPE_56BIT|MPPE_128BIT)) { -+ newret = CONFNAK; -+ if (ao->mppe_128) { -+ ho->mppe_128 = 1; -+ p[5] &= ~MPPE_56BIT; -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -+ MPPE_MAX_KEY_LEN); -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + -+ MPPE_MAX_KEY_LEN, 1) <= 0) { -+ ho->mppe_128 = 0; -+ p[5] |= MPPE_56BIT; -+ p[5] &= ~MPPE_128BIT; -+ goto check_mppe_56; -+ } -+ goto check_mppe; - } -- } else if (ho->mppe & MPPE_OPT_40) { -- if (!(ao->mppe & MPPE_OPT_40)) { -- newret = CONFREJ; -- break; -+ p[5] &= ~MPPE_128BIT; -+ goto check_mppe_56; -+ } -+ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_128BIT)) { -+ newret = CONFNAK; -+ if (ao->mppe_128) { -+ ho->mppe_128 = 1; -+ p[5] &= ~MPPE_40BIT; -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -+ MPPE_MAX_KEY_LEN); -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + -+ MPPE_MAX_KEY_LEN, 1) <= 0) { -+ ho->mppe_128 = 0; -+ p[5] |= MPPE_40BIT; -+ p[5] &= ~MPPE_128BIT; -+ goto check_mppe_40; -+ } -+ goto check_mppe; -+ } -+ p[5] &= ~MPPE_128BIT; -+ goto check_mppe_40; -+ } -+ if ((p[5] & ~MPPE_MPPC) == MPPE_128BIT) { -+ if (ao->mppe_128) { -+ ho->mppe_128 = 1; -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -+ MPPE_MAX_KEY_LEN); -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + -+ MPPE_MAX_KEY_LEN, 1) <= 0) { -+ ho->mppe_128 = 0; -+ p[5] &= ~MPPE_128BIT; -+ newret = CONFNAK; -+ } -+ goto check_mppe; -+ } -+ p[5] &= ~MPPE_128BIT; -+ newret = CONFNAK; -+ goto check_mppe; -+ } -+ check_mppe_56_40: -+ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT)) { -+ newret = CONFNAK; -+ if (ao->mppe_56) { -+ ho->mppe_56 = 1; -+ p[5] &= ~MPPE_40BIT; -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -+ MPPE_MAX_KEY_LEN); -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + -+ MPPE_MAX_KEY_LEN, 1) <= 0) { -+ ho->mppe_56 = 0; -+ p[5] |= MPPE_40BIT; -+ p[5] &= ~MPPE_56BIT; -+ newret = CONFNAK; -+ goto check_mppe_40; -+ } -+ goto check_mppe; -+ } -+ p[5] &= ~MPPE_56BIT; -+ goto check_mppe_40; -+ } -+ check_mppe_56: -+ if ((p[5] & ~MPPE_MPPC) == MPPE_56BIT) { -+ if (ao->mppe_56) { -+ ho->mppe_56 = 1; -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -+ MPPE_MAX_KEY_LEN); -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + -+ MPPE_MAX_KEY_LEN, 1) <= 0) { -+ ho->mppe_56 = 0; -+ p[5] &= ~MPPE_56BIT; -+ newret = CONFNAK; -+ } -+ goto check_mppe; -+ } -+ p[5] &= ~MPPE_56BIT; -+ newret = CONFNAK; -+ goto check_mppe; -+ } -+ check_mppe_40: -+ if ((p[5] & ~MPPE_MPPC) == MPPE_40BIT) { -+ if (ao->mppe_40) { -+ ho->mppe_40 = 1; -+ BCOPY(p, opt_buf, CILEN_MPPE); -+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -+ MPPE_MAX_KEY_LEN); -+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + -+ MPPE_MAX_KEY_LEN, 1) <= 0) { -+ ho->mppe_40 = 0; -+ p[5] &= ~MPPE_40BIT; -+ newret = CONFNAK; -+ } -+ goto check_mppe; -+ } -+ p[5] &= ~MPPE_40BIT; -+ } -+ -+ check_mppe: -+ if (!ho->mppe_40 && !ho->mppe_56 && !ho->mppe_128) { -+ if (wo->mppe_40 || wo->mppe_56 || wo->mppe_128) { -+ newret = CONFNAK; -+ p[2] |= (wo->mppe_stateless ? MPPE_STATELESS : 0); -+ p[5] |= (wo->mppe_40 ? MPPE_40BIT : 0) | -+ (wo->mppe_56 ? MPPE_56BIT : 0) | -+ (wo->mppe_128 ? MPPE_128BIT : 0) | -+ (wo->mppc ? MPPE_MPPC : 0); -+ } else { -+ ho->mppe = ho->mppe_stateless = 0; - } - } else { -- /* Neither are set. */ -- /* We cannot accept this. */ -+ /* MPPE is not compatible with other compression types */ -+ if (wo->mppe) { -+ ao->bsd_compress = 0; -+ ao->predictor_1 = 0; -+ ao->predictor_2 = 0; -+ ao->deflate = 0; -+ ao->lzs = 0; -+ } -+ } -+ if ((!ho->mppc || !ao->mppc) && !ho->mppe) { -+ p[2] = p2; -+ p[5] = p5; - newret = CONFNAK; - /* Give the peer our idea of what can be used, - so it can choose and confirm */ - ho->mppe = ao->mppe; - } - -- /* rebuild the opts */ -- MPPE_OPTS_TO_CI(ho->mppe, &p[2]); -- if (newret == CONFACK) { -- u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; -- int mtu; -- -- BCOPY(p, opt_buf, CILEN_MPPE); -- BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], -- MPPE_MAX_KEY_LEN); -- if (ccp_test(f->unit, opt_buf, -- CILEN_MPPE + MPPE_MAX_KEY_LEN, 1) <= 0) { -- /* This shouldn't happen, we've already tested it! */ -- error("MPPE required, but kernel has no support."); -- lcp_close(f->unit, "MPPE required but not available"); -- newret = CONFREJ; -- break; -- } -- /* -- * We need to decrease the interface MTU by MPPE_PAD -- * because MPPE frames **grow**. The kernel [must] -- * allocate MPPE_PAD extra bytes in xmit buffers. -- */ -- mtu = netif_get_mtu(f->unit); -- if (mtu) -- netif_set_mtu(f->unit, mtu - MPPE_PAD); -- else -- newret = CONFREJ; -- } -+ /* -+ * I have commented the code below because according to RFC1547 -+ * MTU is only information for higher level protocols about -+ * "the maximum allowable length for a packet (q.v.) transmitted -+ * over a point-to-point link without incurring network layer -+ * fragmentation." Of course a PPP implementation should be able -+ * to handle overhead added by MPPE - in our case apropriate code -+ * is located in drivers/net/ppp_generic.c in the kernel sources. -+ * -+ * According to RFC1661: -+ * - when negotiated MRU is less than 1500 octets, a PPP -+ * implementation must still be able to receive at least 1500 -+ * octets, -+ * - when PFC is negotiated, a PPP implementation is still -+ * required to receive frames with uncompressed protocol field. -+ * -+ * So why not to handle MPPE overhead without changing MTU value? -+ * I am sure that RFC3078, unfortunately silently, assumes that. -+ */ - - /* -- * We have accepted MPPE or are willing to negotiate -- * MPPE parameters. A CONFREJ is due to subsequent -- * (non-MPPE) processing. -+ * We need to decrease the interface MTU by MPPE_PAD -+ * because MPPE frames **grow**. The kernel [must] -+ * allocate MPPE_PAD extra bytes in xmit buffers. - */ -- rej_for_ci_mppe = 0; -+/* -+ mtu = netif_get_mtu(f->unit); -+ if (mtu) { -+ netif_set_mtu(f->unit, mtu - MPPE_PAD); -+ } else { -+ newret = CONFREJ; -+ if (ccp_wantoptions[f->unit].mppe) { -+ error("Cannot adjust MTU needed by MPPE."); -+ lcp_close(f->unit, "Cannot adjust MTU needed by MPPE."); -+ } -+ } -+*/ - break; - #endif /* MPPE */ -+ -+ case CI_LZS: -+ if (!ao->lzs || clen != CILEN_LZS) { -+ newret = CONFREJ; -+ break; -+ } -+ -+ ho->lzs = 1; -+ ho->lzs_hists = (p[2] << 8) | p[3]; -+ ho->lzs_mode = p[4]; -+ if ((ho->lzs_hists != ao->lzs_hists) || -+ (ho->lzs_mode != ao->lzs_mode)) { -+ newret = CONFNAK; -+ if (!dont_nak) { -+ p[2] = ao->lzs_hists >> 8; -+ p[3] = ao->lzs_hists & 0xff; -+ p[4] = ao->lzs_mode; -+ } else -+ break; -+ } -+ -+ if (p == p0 && ccp_test(f->unit, p, CILEN_LZS, 1) <= 0) { -+ newret = CONFREJ; -+ } -+ break; -+ - case CI_DEFLATE: - case CI_DEFLATE_DRAFT: - if (!ao->deflate || clen != CILEN_DEFLATE -@@ -1344,12 +1835,6 @@ - else - *lenp = retp - p0; - } --#ifdef MPPE -- if (ret == CONFREJ && ao->mppe && rej_for_ci_mppe) { -- error("MPPE required but peer negotiation failed"); -- lcp_close(f->unit, "MPPE required but peer negotiation failed"); -- } --#endif - return ret; - } - -@@ -1371,24 +1856,35 @@ - char *p = result; - char *q = result + sizeof(result); /* 1 past result */ - -- slprintf(p, q - p, "MPPE "); -- p += 5; -- if (opt->mppe & MPPE_OPT_128) { -- slprintf(p, q - p, "128-bit "); -- p += 8; -- } -- if (opt->mppe & MPPE_OPT_40) { -- slprintf(p, q - p, "40-bit "); -- p += 7; -- } -- if (opt->mppe & MPPE_OPT_STATEFUL) -- slprintf(p, q - p, "stateful"); -- else -- slprintf(p, q - p, "stateless"); -- -+ if (opt->mppe) { -+ if (opt->mppc) { -+ slprintf(p, q - p, "MPPC/MPPE "); -+ p += 10; -+ } else { -+ slprintf(p, q - p, "MPPE "); -+ p += 5; -+ } -+ if (opt->mppe_128) { -+ slprintf(p, q - p, "128-bit "); -+ p += 8; -+ } else if (opt->mppe_56) { -+ slprintf(p, q - p, "56-bit "); -+ p += 7; -+ } else if (opt->mppe_40) { -+ slprintf(p, q - p, "40-bit "); -+ p += 7; -+ } -+ if (opt->mppe_stateless) -+ slprintf(p, q - p, "stateless"); -+ else -+ slprintf(p, q - p, "stateful"); -+ } else if (opt->mppc) -+ slprintf(p, q - p, "MPPC"); - break; - } --#endif -+#endif /* MPPE */ -+ case CI_LZS: -+ return "Stac LZS"; - case CI_DEFLATE: - case CI_DEFLATE_DRAFT: - if (opt2 != NULL && opt2->deflate_size != opt->deflate_size) -@@ -1444,12 +1940,12 @@ - } else if (ANY_COMPRESS(*ho)) - notice("%s transmit compression enabled", method_name(ho, NULL)); - #ifdef MPPE -- if (go->mppe) { -+ if (go->mppe || go->mppc) { - BZERO(mppe_recv_key, MPPE_MAX_KEY_LEN); - BZERO(mppe_send_key, MPPE_MAX_KEY_LEN); - continue_networks(f->unit); /* Bring up IP et al */ - } --#endif -+#endif /* MPPE */ - } - - /* -@@ -1472,7 +1968,7 @@ - lcp_close(f->unit, "MPPE disabled"); - } - } --#endif -+#endif /* MPPE */ - } - - /* -@@ -1532,24 +2028,28 @@ - #ifdef MPPE - case CI_MPPE: - if (optlen >= CILEN_MPPE) { -- u_char mppe_opts; -- -- MPPE_CI_TO_OPTS(&p[2], mppe_opts); -- printer(arg, "mppe %s %s %s %s %s %s%s", -- (p[2] & MPPE_H_BIT)? "+H": "-H", -- (p[5] & MPPE_M_BIT)? "+M": "-M", -- (p[5] & MPPE_S_BIT)? "+S": "-S", -- (p[5] & MPPE_L_BIT)? "+L": "-L", -+ printer(arg, "mppe %s %s %s %s %s %s", -+ (p[2] & MPPE_STATELESS)? "+H": "-H", -+ (p[5] & MPPE_56BIT)? "+M": "-M", -+ (p[5] & MPPE_128BIT)? "+S": "-S", -+ (p[5] & MPPE_40BIT)? "+L": "-L", - (p[5] & MPPE_D_BIT)? "+D": "-D", -- (p[5] & MPPE_C_BIT)? "+C": "-C", -- (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": ""); -- if (mppe_opts & MPPE_OPT_UNKNOWN) -+ (p[5] & MPPE_MPPC)? "+C": "-C"); -+ if ((p[5] & ~(MPPE_56BIT | MPPE_128BIT | MPPE_40BIT | -+ MPPE_D_BIT | MPPE_MPPC)) || -+ (p[2] & ~MPPE_STATELESS)) - printer(arg, " (%.2x %.2x %.2x %.2x)", - p[2], p[3], p[4], p[5]); - p += CILEN_MPPE; - } - break; --#endif -+#endif /* MPPE */ -+ case CI_LZS: -+ if (optlen >= CILEN_LZS) { -+ printer(arg, "lzs %.2x %.2x %.2x", p[2], p[3], p[4]); -+ p += CILEN_LZS; -+ } -+ break; - case CI_DEFLATE: - case CI_DEFLATE_DRAFT: - if (optlen >= CILEN_DEFLATE) { -@@ -1635,6 +2135,7 @@ - error("Lost compression sync: disabling compression"); - ccp_close(unit, "Lost compression sync"); - #ifdef MPPE -+ /* My module dosn't need this. J.D., 2003-07-06 */ - /* - * If we were doing MPPE, we must also take the link down. - */ -@@ -1642,9 +2143,18 @@ - error("Too many MPPE errors, closing LCP"); - lcp_close(unit, "Too many MPPE errors"); - } --#endif -+#endif /* MPPE */ - } else { - /* -+ * When LZS or MPPE/MPPC is negotiated we just send CCP_RESETREQ -+ * and don't wait for CCP_RESETACK -+ */ -+ if ((ccp_gotoptions[f->unit].method == CI_LZS) || -+ (ccp_gotoptions[f->unit].method == CI_MPPE)) { -+ fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0); -+ return; -+ } -+ /* - * Send a reset-request to reset the peer's compressor. - * We don't do that if we are still waiting for an - * acknowledgement to a previous reset-request. -@@ -1675,4 +2185,3 @@ - } else - ccp_localstate[f->unit] &= ~RACK_PENDING; - } -- -diff -ruN ppp-2.4.3.orig/pppd/ccp.h ppp-2.4.3/pppd/ccp.h ---- ppp-2.4.3.orig/pppd/ccp.h 2004-11-04 11:02:26.000000000 +0100 -+++ ppp-2.4.3/pppd/ccp.h 2004-11-21 13:54:09.000000000 +0100 -@@ -37,9 +37,17 @@ - bool predictor_2; /* do Predictor-2? */ - bool deflate_correct; /* use correct code for deflate? */ - bool deflate_draft; /* use draft RFC code for deflate? */ -+ bool lzs; /* do Stac LZS? */ -+ bool mppc; /* do MPPC? */ - bool mppe; /* do MPPE? */ -+ bool mppe_40; /* allow 40 bit encryption? */ -+ bool mppe_56; /* allow 56 bit encryption? */ -+ bool mppe_128; /* allow 128 bit encryption? */ -+ bool mppe_stateless; /* allow stateless encryption */ - u_short bsd_bits; /* # bits/code for BSD Compress */ - u_short deflate_size; /* lg(window size) for Deflate */ -+ u_short lzs_mode; /* LZS check mode */ -+ u_short lzs_hists; /* number of LZS histories */ - short method; /* code for chosen compression method */ - } ccp_options; - -diff -ruN ppp-2.4.3.orig/pppd/chap_ms.c ppp-2.4.3/pppd/chap_ms.c ---- ppp-2.4.3.orig/pppd/chap_ms.c 2004-11-12 10:57:43.000000000 +0100 -+++ ppp-2.4.3/pppd/chap_ms.c 2004-11-21 13:54:09.000000000 +0100 -@@ -895,13 +895,17 @@ - /* - * Disable undesirable encryption types. Note that we don't ENABLE - * any encryption types, to avoid overriding manual configuration. -+ * -+ * It seems that 56 bit keys are unsupported in MS-RADIUS (see RFC 2548) - */ - switch(types) { - case MPPE_ENC_TYPES_RC4_40: -- ccp_wantoptions[0].mppe &= ~MPPE_OPT_128; /* disable 128-bit */ -+ ccp_wantoptions[0].mppe_128 = 0; /* disable 128-bit */ -+ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */ - break; - case MPPE_ENC_TYPES_RC4_128: -- ccp_wantoptions[0].mppe &= ~MPPE_OPT_40; /* disable 40-bit */ -+ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */ -+ ccp_wantoptions[0].mppe_40 = 0; /* disable 40-bit */ - break; - default: - break; -diff -ruN ppp-2.4.3.orig/pppd/pppd.8 ppp-2.4.3/pppd/pppd.8 ---- ppp-2.4.3.orig/pppd/pppd.8 2004-11-13 13:22:49.000000000 +0100 -+++ ppp-2.4.3/pppd/pppd.8 2004-11-21 14:24:47.000000000 +0100 -@@ -622,9 +622,29 @@ - Enables the use of PPP multilink; this is an alias for the `multilink' - option. This option is currently only available under Linux. - .TP --.B mppe\-stateful --Allow MPPE to use stateful mode. Stateless mode is still attempted first. --The default is to disallow stateful mode. -+.B mppc -+Enables MPPC (Microsoft Point to Point Compression). This is the default. -+.TP -+.B mppe \fIsubopt1[,subopt2[,subopt3[..]]] -+Modify MPPE (Microsoft Point to Point Encryption) parameters. In order -+for MPPE to successfully come up, you must have authenticated with either -+MS-CHAP or MS-CHAPv2. By default MPPE is optional, it means that pppd will -+not propose MPPE to the peer, but will negotiate MPPE if peer wants that. -+You can change this using \fIrequired\fR suboption. -+This option is presently only supported under Linux, and only if your -+kernel has been configured to include MPPE support. -+.IP -+MPPE suboptions: -+.br -+\fIrequired\fR - require MPPE; disconnect if peer doesn't support it, -+.br -+\fIstateless\fR - try to negotiate stateless mode; default is stateful, -+.br -+\fIno40\fR - disable 40 bit keys, -+.br -+\fIno56\fR - disable 56 bit keys, -+.br -+\fIno128\fR - disable 128 bit keys - .TP - .B mpshortseq - Enables the use of short (12-bit) sequence numbers in multilink -@@ -757,17 +777,11 @@ - Disables the use of PPP multilink. This option is currently only - available under Linux. - .TP --.B nomppe --Disables MPPE (Microsoft Point to Point Encryption). This is the default. --.TP --.B nomppe\-40 --Disable 40-bit encryption with MPPE. -+.B nomppc -+Disables MPPC (Microsoft Point to Point Compression). - .TP --.B nomppe\-128 --Disable 128-bit encryption with MPPE. --.TP --.B nomppe\-stateful --Disable MPPE stateful mode. This is the default. -+.B nomppe -+Disables MPPE (Microsoft Point to Point Encryption). - .TP - .B nompshortseq - Disables the use of short (12-bit) sequence numbers in the PPP -@@ -948,19 +962,6 @@ - Require the peer to authenticate itself using CHAP [Challenge - Handshake Authentication Protocol] authentication. - .TP --.B require\-mppe --Require the use of MPPE (Microsoft Point to Point Encryption). This --option disables all other compression types. This option enables --both 40-bit and 128-bit encryption. In order for MPPE to successfully --come up, you must have authenticated with either MS\-CHAP or MS\-CHAPv2. --This option is presently only supported under Linux, and only if your --kernel has been configured to include MPPE support. --.TP --.B require\-mppe\-40 --Require the use of MPPE, with 40-bit encryption. --.TP --.B require\-mppe\-128 --Require the use of MPPE, with 128-bit encryption. - .TP - .B require\-mschap - Require the peer to authenticate itself using MS\-CHAP [Microsoft Challenge diff --git a/package/ppp/patches/203-no_strip.patch b/package/ppp/patches/203-no_strip.patch deleted file mode 100644 index 071f3aa3d..000000000 --- a/package/ppp/patches/203-no_strip.patch +++ /dev/null @@ -1,86 +0,0 @@ -diff -Nur ppp-2.4.4.orig/chat/Makefile.linux ppp-2.4.4/chat/Makefile.linux ---- ppp-2.4.4.orig/chat/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 -+++ ppp-2.4.4/chat/Makefile.linux 2006-12-04 14:17:39.000000000 +0100 -@@ -25,7 +25,7 @@ - - install: chat - mkdir -p $(BINDIR) $(MANDIR) -- $(INSTALL) -s -c chat $(BINDIR) -+ $(INSTALL) -c chat $(BINDIR) - $(INSTALL) -c -m 644 chat.8 $(MANDIR) - - clean: -diff -Nur ppp-2.4.4.orig/pppd/Makefile.linux ppp-2.4.4/pppd/Makefile.linux ---- ppp-2.4.4.orig/pppd/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 -+++ ppp-2.4.4/pppd/Makefile.linux 2006-12-04 14:17:39.000000000 +0100 -@@ -99,7 +99,7 @@ - CFLAGS += -DUSE_SRP -DOPENSSL -I/usr/local/ssl/include - LIBS += -lsrp -L/usr/local/ssl/lib -lcrypto - TARGETS += srp-entry --EXTRAINSTALL = $(INSTALL) -s -c -m 555 srp-entry $(BINDIR)/srp-entry -+EXTRAINSTALL = $(INSTALL) -c -m 555 srp-entry $(BINDIR)/srp-entry - MANPAGES += srp-entry.8 - EXTRACLEAN += srp-entry.o - NEEDDES=y -@@ -200,7 +200,7 @@ - install: pppd - mkdir -p $(BINDIR) $(MANDIR) - $(EXTRAINSTALL) -- $(INSTALL) -s -c -m 555 pppd $(BINDIR)/pppd -+ $(INSTALL) -c -m 555 pppd $(BINDIR)/pppd - if chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \ - chmod o-rx,u+s $(BINDIR)/pppd; fi - $(INSTALL) -c -m 444 pppd.8 $(MANDIR) -diff -Nur ppp-2.4.4.orig/pppd/plugins/radius/Makefile.linux ppp-2.4.4/pppd/plugins/radius/Makefile.linux ---- ppp-2.4.4.orig/pppd/plugins/radius/Makefile.linux 2006-06-04 07:04:14.000000000 +0200 -+++ ppp-2.4.4/pppd/plugins/radius/Makefile.linux 2006-12-04 14:17:39.000000000 +0100 -@@ -36,9 +36,9 @@ - - install: all - $(INSTALL) -d -m 755 $(LIBDIR) -- $(INSTALL) -s -c -m 755 radius.so $(LIBDIR) -- $(INSTALL) -s -c -m 755 radattr.so $(LIBDIR) -- $(INSTALL) -s -c -m 755 radrealms.so $(LIBDIR) -+ $(INSTALL) -c -m 755 radius.so $(LIBDIR) -+ $(INSTALL) -c -m 755 radattr.so $(LIBDIR) -+ $(INSTALL) -c -m 755 radrealms.so $(LIBDIR) - $(INSTALL) -c -m 444 pppd-radius.8 $(MANDIR) - $(INSTALL) -c -m 444 pppd-radattr.8 $(MANDIR) - -diff -Nur ppp-2.4.4.orig/pppd/plugins/rp-pppoe/Makefile.linux ppp-2.4.4/pppd/plugins/rp-pppoe/Makefile.linux ---- ppp-2.4.4.orig/pppd/plugins/rp-pppoe/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 -+++ ppp-2.4.4/pppd/plugins/rp-pppoe/Makefile.linux 2006-12-04 14:17:39.000000000 +0100 -@@ -39,9 +39,9 @@ - - install: all - $(INSTALL) -d -m 755 $(LIBDIR) -- $(INSTALL) -s -c -m 4550 rp-pppoe.so $(LIBDIR) -+ $(INSTALL) -c -m 4550 rp-pppoe.so $(LIBDIR) - $(INSTALL) -d -m 755 $(BINDIR) -- $(INSTALL) -s -c -m 555 pppoe-discovery $(BINDIR) -+ $(INSTALL) -c -m 555 pppoe-discovery $(BINDIR) - - clean: - rm -f *.o *.so -diff -Nur ppp-2.4.4.orig/pppdump/Makefile.linux ppp-2.4.4/pppdump/Makefile.linux ---- ppp-2.4.4.orig/pppdump/Makefile.linux 2006-06-04 07:04:14.000000000 +0200 -+++ ppp-2.4.4/pppdump/Makefile.linux 2006-12-04 14:17:39.000000000 +0100 -@@ -17,5 +17,5 @@ - - install: - mkdir -p $(BINDIR) $(MANDIR) -- $(INSTALL) -s -c pppdump $(BINDIR) -+ $(INSTALL) -c pppdump $(BINDIR) - $(INSTALL) -c -m 444 pppdump.8 $(MANDIR) -diff -Nur ppp-2.4.4.orig/pppstats/Makefile.linux ppp-2.4.4/pppstats/Makefile.linux ---- ppp-2.4.4.orig/pppstats/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 -+++ ppp-2.4.4/pppstats/Makefile.linux 2006-12-04 14:17:39.000000000 +0100 -@@ -22,7 +22,7 @@ - - install: pppstats - -mkdir -p $(MANDIR) -- $(INSTALL) -s -c pppstats $(BINDIR) -+ $(INSTALL) -c pppstats $(BINDIR) - $(INSTALL) -c -m 444 pppstats.8 $(MANDIR) - - pppstats: $(PPPSTATSRCS) diff --git a/package/ppp/patches/204-opt_flags.patch b/package/ppp/patches/204-opt_flags.patch deleted file mode 100644 index 200e76b5b..000000000 --- a/package/ppp/patches/204-opt_flags.patch +++ /dev/null @@ -1,26 +0,0 @@ -diff -ruN ppp-2.4.3-orig/pppd/plugins/radius/Makefile.linux ppp-2.4.3-3/pppd/plugins/radius/Makefile.linux ---- ppp-2.4.3-orig/pppd/plugins/radius/Makefile.linux 2004-11-14 08:02:31.000000000 +0100 -+++ ppp-2.4.3-3/pppd/plugins/radius/Makefile.linux 2004-12-05 17:43:17.000000000 +0100 -@@ -12,7 +12,8 @@ - INSTALL = install - - PLUGIN=radius.so radattr.so radrealms.so --CFLAGS=-I. -I../.. -I../../../include -O2 -fPIC -DRC_LOG_FACILITY=LOG_DAEMON -+COPTS = -O2 -+CFLAGS=-I. -I../.. -I../../../include $(COPTS) -fPIC -DRC_LOG_FACILITY=LOG_DAEMON - - # Uncomment the next line to include support for Microsoft's - # MS-CHAP authentication protocol. -diff -ruN ppp-2.4.3-orig/pppdump/Makefile.linux ppp-2.4.3-3/pppdump/Makefile.linux ---- ppp-2.4.3-orig/pppdump/Makefile.linux 2004-10-31 02:36:52.000000000 +0200 -+++ ppp-2.4.3-3/pppdump/Makefile.linux 2004-12-05 17:50:34.000000000 +0100 -@@ -2,7 +2,8 @@ - BINDIR = $(DESTDIR)/sbin - MANDIR = $(DESTDIR)/share/man/man8 - --CFLAGS= -O -I../include/net -+COPTS = -O -+CFLAGS= $(COPTS) -I../include/net - OBJS = pppdump.o bsd-comp.o deflate.o zlib.o - - INSTALL= install diff --git a/package/ppp/patches/206-radius_config.patch b/package/ppp/patches/206-radius_config.patch deleted file mode 100644 index f9a8217cd..000000000 --- a/package/ppp/patches/206-radius_config.patch +++ /dev/null @@ -1,39 +0,0 @@ -diff -Nur ppp-2.4.4-orig/pppd/plugins/radius/etc/radiusclient.conf ppp-2.4.4/pppd/plugins/radius/etc/radiusclient.conf ---- ppp-2.4.4-orig/pppd/plugins/radius/etc/radiusclient.conf 2004-11-14 00:48:39.000000000 +0100 -+++ ppp-2.4.4/pppd/plugins/radius/etc/radiusclient.conf 2007-01-23 23:56:52.000000000 +0100 -@@ -22,7 +22,7 @@ - - # name of the issue file. it's only display when no username is passed - # on the radlogin command line (default /etc/radiusclient/issue) --issue /usr/local/etc/radiusclient/issue -+issue /etc/radiusclient/issue - - # RADIUS settings - -@@ -43,22 +43,22 @@ - - # file holding shared secrets used for the communication - # between the RADIUS client and server --servers /usr/local/etc/radiusclient/servers -+servers /etc/radiusclient/servers - - # dictionary of allowed attributes and values - # just like in the normal RADIUS distributions --dictionary /usr/local/etc/radiusclient/dictionary -+dictionary /etc/radiusclient/dictionary - - # program to call for a RADIUS authenticated login - # (default /usr/sbin/login.radius) --login_radius /usr/local/sbin/login.radius -+login_radius /sbin/login.radius - - # file which holds sequence number for communication with the - # RADIUS server - seqfile /var/run/radius.seq - - # file which specifies mapping between ttyname and NAS-Port attribute --mapfile /usr/local/etc/radiusclient/port-id-map -+mapfile /etc/radiusclient/port-id-map - - # default authentication realm to append to all usernames if no - # realm was explicitly specified by the user diff --git a/package/ppp/patches/208-no_exponential_timeout.patch b/package/ppp/patches/208-no_exponential_timeout.patch deleted file mode 100644 index d6c986a7e..000000000 --- a/package/ppp/patches/208-no_exponential_timeout.patch +++ /dev/null @@ -1,28 +0,0 @@ -diff -urN ppp.old/pppd/plugins/rp-pppoe/discovery.c ppp.dev/pppd/plugins/rp-pppoe/discovery.c ---- ppp.old/pppd/plugins/rp-pppoe/discovery.c 2005-09-05 15:25:35.917232000 +0200 -+++ ppp.dev/pppd/plugins/rp-pppoe/discovery.c 2005-09-05 15:29:17.233586872 +0200 -@@ -593,12 +593,14 @@ - conn->discoveryState = STATE_SENT_PADI; - waitForPADO(conn, timeout); - -+#if 0 - /* If we're just probing for access concentrators, don't do - exponential backoff. This reduces the time for an unsuccessful - probe to 15 seconds. */ - if (!conn->printACNames) { - timeout *= 2; - } -+#endif - if (conn->printACNames && conn->numPADOs) { - break; - } -@@ -621,7 +623,9 @@ - sendPADR(conn); - conn->discoveryState = STATE_SENT_PADR; - waitForPADS(conn, timeout); -+#if 0 - timeout *= 2; -+#endif - } while (conn->discoveryState == STATE_SENT_PADR); - - /* We're done. */ diff --git a/package/ppp/patches/209-compensate_time_change.patch b/package/ppp/patches/209-compensate_time_change.patch deleted file mode 100644 index f43085ab1..000000000 --- a/package/ppp/patches/209-compensate_time_change.patch +++ /dev/null @@ -1,82 +0,0 @@ -diff -urN ppp.old/pppd/main.c ppp.dev/pppd/main.c ---- ppp.old/pppd/main.c 2005-11-11 19:19:28.177790000 +0100 -+++ ppp.dev/pppd/main.c 2005-11-11 20:18:05.957363000 +0100 -@@ -90,6 +90,7 @@ - #include - #include - #include -+#include - - #include "pppd.h" - #include "magic.h" -@@ -227,6 +228,7 @@ - - /* Prototypes for procedures local to this file. */ - -+static void check_time(void); - static void setup_signals __P((void)); - static void create_pidfile __P((int pid)); - static void create_linkpidfile __P((int pid)); -@@ -531,6 +533,7 @@ - info("Starting link"); - } - -+ check_time(); - gettimeofday(&start_time, NULL); - script_unsetenv("CONNECT_TIME"); - script_unsetenv("BYTES_SENT"); -@@ -1195,6 +1198,36 @@ - - static struct callout *callout = NULL; /* Callout list */ - static struct timeval timenow; /* Current time */ -+static long uptime_diff = 0; -+static int uptime_diff_set = 0; -+ -+static void check_time(void) -+{ -+ long new_diff; -+ struct timeval t; -+ struct sysinfo i; -+ struct callout *p; -+ -+ gettimeofday(&t, NULL); -+ sysinfo(&i); -+ new_diff = t.tv_sec - i.uptime; -+ -+ if (!uptime_diff_set) { -+ uptime_diff = new_diff; -+ uptime_diff_set = 1; -+ return; -+ } -+ -+ if ((new_diff - 5 > uptime_diff) || (new_diff + 5 < uptime_diff)) { -+ /* system time has changed, update counters and timeouts */ -+ info("System time change detected."); -+ start_time.tv_sec += new_diff - uptime_diff; -+ -+ for (p = callout; p != NULL; p = p->c_next) -+ p->c_time.tv_sec += new_diff - uptime_diff; -+ } -+ uptime_diff = new_diff; -+} - - /* - * timeout - Schedule a timeout. -@@ -1265,6 +1298,8 @@ - { - struct callout *p; - -+ check_time(); -+ - while (callout != NULL) { - p = callout; - -@@ -1292,6 +1327,8 @@ - { - if (callout == NULL) - return NULL; -+ -+ check_time(); - - gettimeofday(&timenow, NULL); - tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec; diff --git a/package/ppp/patches/320-use_target_ar.patch b/package/ppp/patches/320-use_target_ar.patch deleted file mode 100644 index 8601d9d56..000000000 --- a/package/ppp/patches/320-use_target_ar.patch +++ /dev/null @@ -1,24 +0,0 @@ -$Id$ - ---- ppp-2.4.3/pppd/plugins/radius/Makefile.linux.orig Sun Jun 18 23:45:43 2006 -+++ ppp-2.4.3/pppd/plugins/radius/Makefile.linux Sun Jun 18 23:46:01 2006 -@@ -55,7 +55,7 @@ radrealms.so: radrealms.o - CLIENTOBJS = avpair.o buildreq.o config.o dict.o ip_util.o \ - clientid.o sendserver.o lock.o util.o md5.o - libradiusclient.a: $(CLIENTOBJS) -- $(AR) rv $@ $? -+ $(TARGET_AR) rcsv $@ $? - - clean: - rm -f *.o *.so *.a ---- ppp-2.4.3/pppd/plugins/rp-pppoe/Makefile.linux.orig Sun Jun 18 23:45:44 2006 -+++ ppp-2.4.3/pppd/plugins/rp-pppoe/Makefile.linux Sun Jun 18 23:46:09 2006 -@@ -50,7 +50,7 @@ plugin.o: plugin.c - $(CC) '-DRP_VERSION="$(VERSION)"' $(CFLAGS) -I../../.. -c -o plugin.o -fPIC plugin.c - - libplugin.a: discovery.o if.o common.o debug.o -- $(AR) -rc $@ $^ -+ $(TARGET_AR) -rcs $@ $^ - - discovery.o: discovery.c - $(CC) $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o discovery.o -fPIC discovery.c diff --git a/package/ppp/patches/patch-chat_Makefile_linux b/package/ppp/patches/patch-chat_Makefile_linux new file mode 100644 index 000000000..63190f3e3 --- /dev/null +++ b/package/ppp/patches/patch-chat_Makefile_linux @@ -0,0 +1,11 @@ +--- ppp-2.4.4.orig/chat/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 ++++ ppp-2.4.4/chat/Makefile.linux 2009-06-05 19:12:00.000000000 +0200 +@@ -25,7 +25,7 @@ chat.o: chat.c + + install: chat + mkdir -p $(BINDIR) $(MANDIR) +- $(INSTALL) -s -c chat $(BINDIR) ++ $(INSTALL) -c chat $(BINDIR) + $(INSTALL) -c -m 644 chat.8 $(MANDIR) + + clean: diff --git a/package/ppp/patches/patch-configure b/package/ppp/patches/patch-configure new file mode 100644 index 000000000..4ec084e2e --- /dev/null +++ b/package/ppp/patches/patch-configure @@ -0,0 +1,15 @@ +--- ppp-2.4.4.orig/configure 2005-07-09 02:23:05.000000000 +0200 ++++ ppp-2.4.4/configure 2009-06-05 19:12:00.000000000 +0200 +@@ -8,9 +8,9 @@ SYSCONF=/etc + # if [ -d /NextApps ]; then + # system="NeXTStep" + # else +- system=`uname -s` +- release=`uname -r` +- arch=`uname -m` ++ system=${UNAME_S:-`uname -s`} ++ release=${UNAME_R:-`uname -r`} ++ arch=${UNAME_M:-`uname -m`} + # fi + state="unknown" + diff --git a/package/ppp/patches/patch-include_linux_ppp-comp_h b/package/ppp/patches/patch-include_linux_ppp-comp_h new file mode 100644 index 000000000..4ffaea45c --- /dev/null +++ b/package/ppp/patches/patch-include_linux_ppp-comp_h @@ -0,0 +1,63 @@ +--- ppp-2.4.4.orig/include/linux/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100 ++++ ppp-2.4.4/include/linux/ppp-comp.h 2009-06-05 19:12:00.000000000 +0200 +@@ -36,7 +36,7 @@ + */ + + /* +- * ==FILEVERSION 20020319== ++ * ==FILEVERSION 20020715== + * + * NOTE TO MAINTAINERS: + * If you modify this file at all, please set the above date. +@@ -86,7 +86,7 @@ struct compressor { + + /* Compress a packet */ + int (*compress) (void *state, unsigned char *rptr, +- unsigned char *obuf, int isize, int osize); ++ unsigned char *obuf, int isize, int osize); + + /* Return compression statistics */ + void (*comp_stat) (void *state, struct compstat *stats); +@@ -107,7 +107,7 @@ struct compressor { + + /* Decompress a packet. */ + int (*decompress) (void *state, unsigned char *ibuf, int isize, +- unsigned char *obuf, int osize); ++ unsigned char *obuf, int osize); + + /* Update state for an incompressible packet received */ + void (*incomp) (void *state, unsigned char *ibuf, int icnt); +@@ -288,6 +288,33 @@ struct compressor { + opts |= MPPE_OPT_UNKNOWN; \ + } while (/* CONSTCOND */ 0) + ++/* MPPE/MPPC definitions by J.D.*/ ++#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */ ++#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */ ++#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */ ++#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */ ++#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */ ++ ++/* ++ * Definitions for Stac LZS. ++ */ ++ ++#define CI_LZS 17 /* config option for Stac LZS */ ++#define CILEN_LZS 5 /* length of config option */ ++ ++#define LZS_OVHD 4 /* max. LZS overhead */ ++#define LZS_HIST_LEN 2048 /* LZS history size */ ++#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ ++ ++#define LZS_MODE_NONE 0 ++#define LZS_MODE_LCB 1 ++#define LZS_MODE_CRC 2 ++#define LZS_MODE_SEQ 3 ++#define LZS_MODE_EXT 4 ++ ++#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ ++#define LZS_EXT_BIT_COMP 0x20 /* bit C */ ++ + /* + * Definitions for other, as yet unsupported, compression methods. + */ diff --git a/package/ppp/patches/patch-include_net_ppp-comp_h b/package/ppp/patches/patch-include_net_ppp-comp_h new file mode 100644 index 000000000..239cf1443 --- /dev/null +++ b/package/ppp/patches/patch-include_net_ppp-comp_h @@ -0,0 +1,36 @@ +--- ppp-2.4.4.orig/include/net/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100 ++++ ppp-2.4.4/include/net/ppp-comp.h 2009-06-05 19:12:00.000000000 +0200 +@@ -255,6 +255,33 @@ struct compressor { + opts |= MPPE_OPT_UNKNOWN; \ + } while (/* CONSTCOND */ 0) + ++/* MPPE/MPPC definitions by J.D.*/ ++#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */ ++#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */ ++#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */ ++#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */ ++#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */ ++ ++/* ++ * Definitions for Stac LZS. ++ */ ++ ++#define CI_LZS 17 /* config option for Stac LZS */ ++#define CILEN_LZS 5 /* length of config option */ ++ ++#define LZS_OVHD 4 /* max. LZS overhead */ ++#define LZS_HIST_LEN 2048 /* LZS history size */ ++#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ ++ ++#define LZS_MODE_NONE 0 ++#define LZS_MODE_LCB 1 ++#define LZS_MODE_CRC 2 ++#define LZS_MODE_SEQ 3 ++#define LZS_MODE_EXT 4 ++ ++#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ ++#define LZS_EXT_BIT_COMP 0x20 /* bit C */ ++ + /* + * Definitions for other, as yet unsupported, compression methods. + */ diff --git a/package/ppp/patches/patch-pppd_Makefile_linux b/package/ppp/patches/patch-pppd_Makefile_linux new file mode 100644 index 000000000..32453b249 --- /dev/null +++ b/package/ppp/patches/patch-pppd_Makefile_linux @@ -0,0 +1,61 @@ +--- ppp-2.4.4.orig/pppd/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 ++++ ppp-2.4.4/pppd/Makefile.linux 2009-06-05 19:12:00.000000000 +0200 +@@ -48,7 +48,7 @@ MPPE=y + # Uncomment the next line to include support for PPP packet filtering. + # This requires that the libpcap library and headers be installed + # and that the kernel driver support PPP packet filtering. +-FILTER=y ++#FILTER=y + + # Uncomment the next line to enable multilink PPP (enabled by default) + # Linux distributions: Please leave multilink ENABLED in your builds +@@ -58,9 +58,9 @@ HAVE_MULTILINK=y + # Uncomment the next line to enable the TDB database (enabled by default.) + # If you enable multilink, then TDB is automatically enabled also. + # Linux distributions: Please leave TDB ENABLED in your builds. +-USE_TDB=y ++#USE_TDB=y + +-HAS_SHADOW=y ++#HAS_SHADOW=y + #USE_PAM=y + #HAVE_INET6=y + +@@ -77,7 +77,7 @@ MAXOCTETS=y + + INCLUDE_DIRS= -I../include + +-COMPILE_FLAGS= -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MMAP ++COMPILE_FLAGS= -DHAVE_PATHS_H -DHAVE_MMAP + + CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS) '-DDESTDIR="@DESTDIR@"' + +@@ -99,7 +99,7 @@ ifdef USE_SRP + CFLAGS += -DUSE_SRP -DOPENSSL -I/usr/local/ssl/include + LIBS += -lsrp -L/usr/local/ssl/lib -lcrypto + TARGETS += srp-entry +-EXTRAINSTALL = $(INSTALL) -s -c -m 555 srp-entry $(BINDIR)/srp-entry ++EXTRAINSTALL = $(INSTALL) -c -m 555 srp-entry $(BINDIR)/srp-entry + MANPAGES += srp-entry.8 + EXTRACLEAN += srp-entry.o + NEEDDES=y +@@ -117,10 +117,8 @@ CFLAGS += -DHAS_SHADOW + #LIBS += -lshadow $(LIBS) + endif + +-ifneq ($(wildcard /usr/include/crypt.h),) + CFLAGS += -DHAVE_CRYPT_H=1 + LIBS += -lcrypt +-endif + + ifdef NEEDDES + ifndef USE_CRYPT +@@ -200,7 +198,7 @@ all: $(TARGETS) + install: pppd + mkdir -p $(BINDIR) $(MANDIR) + $(EXTRAINSTALL) +- $(INSTALL) -s -c -m 555 pppd $(BINDIR)/pppd ++ $(INSTALL) -c -m 555 pppd $(BINDIR)/pppd + if chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \ + chmod o-rx,u+s $(BINDIR)/pppd; fi + $(INSTALL) -c -m 444 pppd.8 $(MANDIR) diff --git a/package/ppp/patches/patch-pppd_ccp_c b/package/ppp/patches/patch-pppd_ccp_c new file mode 100644 index 000000000..66b76b03d --- /dev/null +++ b/package/ppp/patches/patch-pppd_ccp_c @@ -0,0 +1,1362 @@ +--- ppp-2.4.4.orig/pppd/ccp.c 2005-07-09 02:23:05.000000000 +0200 ++++ ppp-2.4.4/pppd/ccp.c 2009-06-05 19:12:00.000000000 +0200 +@@ -62,12 +62,10 @@ static int setdeflate __P((char **)); + static char bsd_value[8]; + static char deflate_value[8]; + +-/* +- * Option variables. +- */ + #ifdef MPPE +-bool refuse_mppe_stateful = 1; /* Allow stateful mode? */ +-#endif ++static int setmppe(char **); ++static int setnomppe(void); ++#endif /* MPPE */ + + static option_t ccp_option_list[] = { + { "noccp", o_bool, &ccp_protent.enabled_flag, +@@ -108,54 +106,36 @@ static option_t ccp_option_list[] = { + "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, + &ccp_allowoptions[0].predictor_1 }, + +-#ifdef MPPE +- /* MPPE options are symmetrical ... we only set wantoptions here */ +- { "require-mppe", o_bool, &ccp_wantoptions[0].mppe, +- "require MPPE encryption", +- OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, +- { "+mppe", o_bool, &ccp_wantoptions[0].mppe, +- "require MPPE encryption", +- OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, +- { "nomppe", o_bool, &ccp_wantoptions[0].mppe, +- "don't allow MPPE encryption", OPT_PRIO }, +- { "-mppe", o_bool, &ccp_wantoptions[0].mppe, +- "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO }, +- +- /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */ +- { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, +- &ccp_wantoptions[0].mppe }, +- { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, +- &ccp_wantoptions[0].mppe }, +- { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 40-bit encryption", +- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe }, +- { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 40-bit encryption", +- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, +- &ccp_wantoptions[0].mppe }, +- +- { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128, +- &ccp_wantoptions[0].mppe }, +- { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 128-bit encryption", +- OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128, +- &ccp_wantoptions[0].mppe }, +- { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 128-bit encryption", +- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe }, +- { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 128-bit encryption", +- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, +- &ccp_wantoptions[0].mppe }, ++ { "lzs", o_bool, &ccp_wantoptions[0].lzs, ++ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_PRIO }, ++ { "+lzs", o_bool, &ccp_wantoptions[0].lzs, ++ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_ALIAS | OPT_PRIO }, ++ { "nolzs", o_bool, &ccp_wantoptions[0].lzs, ++ "don't allow Stac LZS", OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].lzs }, ++ { "-lzs", o_bool, &ccp_wantoptions[0].lzs, ++ "don't allow Stac LZS", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].lzs }, + +- /* strange one; we always request stateless, but will we allow stateful? */ +- { "mppe-stateful", o_bool, &refuse_mppe_stateful, +- "allow MPPE stateful mode", OPT_PRIO }, +- { "nomppe-stateful", o_bool, &refuse_mppe_stateful, +- "disallow MPPE stateful mode", OPT_PRIO | 1 }, ++#ifdef MPPE ++ { "mppc", o_bool, &ccp_wantoptions[0].mppc, ++ "request MPPC compression", 1, &ccp_allowoptions[0].mppc }, ++ { "+mppc", o_bool, &ccp_wantoptions[0].mppc, ++ "request MPPC compression", 1, &ccp_allowoptions[0].mppc, OPT_ALIAS }, ++ { "nomppc", o_bool, &ccp_wantoptions[0].mppc, ++ "don't allow MPPC compression", OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].mppc }, ++ { "-mppc", o_bool, &ccp_wantoptions[0].mppc, ++ "don't allow MPPC compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].mppc }, ++ { "mppe", o_special, (void *)setmppe, ++ "request MPPE encryption" }, ++ { "+mppe", o_special, (void *)setmppe, ++ "request MPPE encryption" }, ++ { "nomppe", o_special_noarg, (void *)setnomppe, ++ "don't allow MPPE encryption" }, ++ { "-mppe", o_special_noarg, (void *)setnomppe, ++ "don't allow MPPE encryption" }, + #endif /* MPPE */ + + { NULL } +@@ -241,7 +221,7 @@ static fsm_callbacks ccp_callbacks = { + */ + #define ANY_COMPRESS(opt) ((opt).deflate || (opt).bsd_compress \ + || (opt).predictor_1 || (opt).predictor_2 \ +- || (opt).mppe) ++ || (opt).lzs || (opt).mppc || (opt).mppe) + + /* + * Local state (mainly for handling reset-reqs and reset-acks). +@@ -344,6 +324,100 @@ setdeflate(argv) + return 1; + } + ++#ifdef MPPE ++/* ++ * Functions called from config options ++ */ ++/* ++ MPPE suboptions: ++ required - require MPPE; disconnect if peer doesn't support it ++ stateless - use stateless mode ++ no40 - disable 40 bit keys ++ no56 - disable 56 bit keys ++ no128 - disable 128 bit keys ++*/ ++int setmppe(char **argv) ++{ ++ int i; ++ char *str, cmdbuf[16]; ++ ++ ccp_allowoptions[0].mppe = 1; ++ ccp_allowoptions[0].mppe_40 = 1; ++ ccp_allowoptions[0].mppe_56 = 1; ++ ccp_allowoptions[0].mppe_128 = 1; ++ ccp_allowoptions[0].mppe_stateless = 0; ++ ccp_wantoptions[0].mppe = 0; ++ ++ str = *argv; ++ ++ while (1) { ++ i = 0; ++ memset(cmdbuf, '\0', 16); ++ while ((i < 16) && (*str != ',') && (*str != '\0')) ++ cmdbuf[i++] = *str++; ++ cmdbuf[i] = '\0'; ++ if (!strncasecmp(cmdbuf, "no40", strlen("no40"))) { ++ ccp_allowoptions[0].mppe_40 = 0; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "no56", strlen("no56"))) { ++ ccp_allowoptions[0].mppe_56 = 0; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "no128", strlen("no128"))) { ++ ccp_allowoptions[0].mppe_128 = 0; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "stateless", strlen("stateless"))) { ++ ccp_allowoptions[0].mppe_stateless = 1; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "required", strlen("required"))) { ++ ccp_wantoptions[0].mppe = 1; ++ goto next_param; ++ } else { ++ option_error("invalid parameter '%s' for mppe option", cmdbuf); ++ return 0; ++ } ++ ++ next_param: ++ if (*str == ',') { ++ str++; ++ continue; ++ } ++ if (*str == '\0') { ++ if (!(ccp_allowoptions[0].mppe_40 || ccp_allowoptions[0].mppe_56 || ++ ccp_allowoptions[0].mppe_128)) { ++ if (ccp_wantoptions[0].mppe == 1) { ++ option_error("You require MPPE but you have switched off " ++ "all encryption key lengths."); ++ return 0; ++ } ++ ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0; ++ ccp_wantoptions[0].mppe_stateless = ++ ccp_allowoptions[0].mppe_stateless = 0; ++ } else { ++ ccp_allowoptions[0].mppe = 1; ++ ccp_wantoptions[0].mppe_stateless = ++ ccp_allowoptions[0].mppe_stateless; ++ if (ccp_wantoptions[0].mppe == 1) { ++ ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40; ++ ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56; ++ ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128; ++ } ++ } ++ return 1; ++ } ++ } ++} ++ ++int setnomppe(void) ++{ ++ ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0; ++ ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40 = 0; ++ ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56 = 0; ++ ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128 = 0; ++ ccp_wantoptions[0].mppe_stateless = ccp_allowoptions[0].mppe_stateless = 0; ++ return 1; ++} ++#endif /* MPPE */ ++ + /* + * ccp_init - initialize CCP. + */ +@@ -378,6 +452,30 @@ ccp_init(unit) + ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS; + + ccp_allowoptions[0].predictor_1 = 1; ++ ++ ccp_wantoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */ ++ ccp_wantoptions[0].lzs_mode = LZS_MODE_SEQ; ++ ccp_wantoptions[0].lzs_hists = 1; ++ ccp_allowoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */ ++ ccp_allowoptions[0].lzs_mode = LZS_MODE_SEQ; ++ ccp_allowoptions[0].lzs_hists = 1; ++ ++#ifdef MPPE ++ /* by default allow and request MPPC... */ ++ ccp_wantoptions[0].mppc = ccp_allowoptions[0].mppc = 1; ++ ++ /* ... and allow but don't request MPPE */ ++ ccp_allowoptions[0].mppe = 1; ++ ccp_allowoptions[0].mppe_40 = 1; ++ ccp_allowoptions[0].mppe_56 = 1; ++ ccp_allowoptions[0].mppe_128 = 1; ++ ccp_allowoptions[0].mppe_stateless = 1; ++ ccp_wantoptions[0].mppe = 0; ++ ccp_wantoptions[0].mppe_40 = 0; ++ ccp_wantoptions[0].mppe_56 = 0; ++ ccp_wantoptions[0].mppe_128 = 0; ++ ccp_wantoptions[0].mppe_stateless = 0; ++#endif /* MPPE */ + } + + /* +@@ -455,11 +553,11 @@ ccp_input(unit, p, len) + if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED) { + notice("Compression disabled by peer."); + #ifdef MPPE +- if (ccp_gotoptions[unit].mppe) { ++ if (ccp_wantoptions[unit].mppe) { + error("MPPE disabled, closing LCP"); + lcp_close(unit, "MPPE disabled by peer"); + } +-#endif ++#endif /* MPPE */ + } + + /* +@@ -487,6 +585,15 @@ ccp_extcode(f, code, id, p, len) + break; + /* send a reset-ack, which the transmitter will see and + reset its compression state. */ ++ ++ /* In case of MPPE/MPPC or LZS we shouldn't send CCP_RESETACK, ++ but we do it in order to reset compressor; CCP_RESETACK is ++ then silently discarded. See functions ppp_send_frame and ++ ppp_ccp_peek in ppp_generic.c (Linux only !!!). All the ++ confusion is caused by the fact that CCP code is splited ++ into two parts - one part is handled by pppd, the other one ++ is handled by kernel. */ ++ + fsm_sdata(f, CCP_RESETACK, id, NULL, 0); + break; + +@@ -515,12 +622,11 @@ ccp_protrej(unit) + fsm_lowerdown(&ccp_fsm[unit]); + + #ifdef MPPE +- if (ccp_gotoptions[unit].mppe) { ++ if (ccp_wantoptions[unit].mppe) { + error("MPPE required but peer negotiation failed"); + lcp_close(unit, "MPPE required but peer negotiation failed"); + } +-#endif +- ++#endif /* MPPE */ + } + + /* +@@ -537,7 +643,7 @@ ccp_resetci(f) + all_rejected[f->unit] = 0; + + #ifdef MPPE +- if (go->mppe) { ++ if (go->mppe || go->mppc) { + ccp_options *ao = &ccp_allowoptions[f->unit]; + int auth_mschap_bits = auth_done[f->unit]; + int numbits; +@@ -551,80 +657,109 @@ ccp_resetci(f) + * NB: If MPPE is required, all other compression opts are invalid. + * So, we return right away if we can't do it. + */ ++ if (ccp_wantoptions[f->unit].mppe) { ++ /* Leave only the mschap auth bits set */ ++ auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER | ++ CHAP_MS2_WITHPEER | CHAP_MS2_PEER); ++ /* Count the mschap auths */ ++ auth_mschap_bits >>= CHAP_MS_SHIFT; ++ numbits = 0; ++ do { ++ numbits += auth_mschap_bits & 1; ++ auth_mschap_bits >>= 1; ++ } while (auth_mschap_bits); ++ if (numbits > 1) { ++ error("MPPE required, but auth done in both directions."); ++ lcp_close(f->unit, "MPPE required but not available"); ++ return; ++ } ++ if (!numbits) { ++ error("MPPE required, but MS-CHAP[v2] auth not performed."); ++ lcp_close(f->unit, "MPPE required but not available"); ++ return; ++ } + +- /* Leave only the mschap auth bits set */ +- auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER | +- CHAP_MS2_WITHPEER | CHAP_MS2_PEER); +- /* Count the mschap auths */ +- auth_mschap_bits >>= CHAP_MS_SHIFT; +- numbits = 0; +- do { +- numbits += auth_mschap_bits & 1; +- auth_mschap_bits >>= 1; +- } while (auth_mschap_bits); +- if (numbits > 1) { +- error("MPPE required, but auth done in both directions."); +- lcp_close(f->unit, "MPPE required but not available"); +- return; +- } +- if (!numbits) { +- error("MPPE required, but MS-CHAP[v2] auth not performed."); +- lcp_close(f->unit, "MPPE required but not available"); +- return; ++ /* A plugin (eg radius) may not have obtained key material. */ ++ if (!mppe_keys_set) { ++ error("MPPE required, but keys are not available. " ++ "Possible plugin problem?"); ++ lcp_close(f->unit, "MPPE required but not available"); ++ return; ++ } + } + +- /* A plugin (eg radius) may not have obtained key material. */ +- if (!mppe_keys_set) { +- error("MPPE required, but keys are not available. " +- "Possible plugin problem?"); +- lcp_close(f->unit, "MPPE required but not available"); +- return; ++ /* ++ * Check whether the kernel knows about the various ++ * compression methods we might request. Key material ++ * unimportant here. ++ */ ++ if (go->mppc) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = 0; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_MPPC; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 0) <= 0) ++ go->mppc = 0; + } +- +- /* LM auth not supported for MPPE */ +- if (auth_done[f->unit] & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) { +- /* This might be noise */ +- if (go->mppe & MPPE_OPT_40) { +- notice("Disabling 40-bit MPPE; MS-CHAP LM not supported"); +- go->mppe &= ~MPPE_OPT_40; +- ccp_wantoptions[f->unit].mppe &= ~MPPE_OPT_40; +- } ++ if (go->mppe_40) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = MPPE_STATELESS; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_40BIT; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) ++ go->mppe_40 = 0; + } +- +- /* Last check: can we actually negotiate something? */ +- if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) { +- /* Could be misconfig, could be 40-bit disabled above. */ +- error("MPPE required, but both 40-bit and 128-bit disabled."); +- lcp_close(f->unit, "MPPE required but not available"); +- return; ++ if (go->mppe_56) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = MPPE_STATELESS; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_56BIT; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) ++ go->mppe_56 = 0; ++ } ++ if (go->mppe_128) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = MPPE_STATELESS; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_128BIT; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) ++ go->mppe_128 = 0; ++ } ++ if (!go->mppe_40 && !go->mppe_56 && !go->mppe_128) { ++ if (ccp_wantoptions[f->unit].mppe) { ++ error("MPPE required, but kernel has no support."); ++ lcp_close(f->unit, "MPPE required but not available"); ++ } ++ go->mppe = go->mppe_stateless = 0; ++ } else { ++ /* MPPE is not compatible with other compression types */ ++ if (ccp_wantoptions[f->unit].mppe) { ++ ao->bsd_compress = go->bsd_compress = 0; ++ ao->predictor_1 = go->predictor_1 = 0; ++ ao->predictor_2 = go->predictor_2 = 0; ++ ao->deflate = go->deflate = 0; ++ ao->lzs = go->lzs = 0; ++ } + } +- +- /* sync options */ +- ao->mppe = go->mppe; +- /* MPPE is not compatible with other compression types */ +- ao->bsd_compress = go->bsd_compress = 0; +- ao->predictor_1 = go->predictor_1 = 0; +- ao->predictor_2 = go->predictor_2 = 0; +- ao->deflate = go->deflate = 0; + } + #endif /* MPPE */ +- +- /* +- * Check whether the kernel knows about the various +- * compression methods we might request. +- */ +-#ifdef MPPE +- if (go->mppe) { +- opt_buf[0] = CI_MPPE; +- opt_buf[1] = CILEN_MPPE; +- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); +- /* Key material unimportant here. */ +- if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) { +- error("MPPE required, but kernel has no support."); +- lcp_close(f->unit, "MPPE required but not available"); +- } ++ if (go->lzs) { ++ opt_buf[0] = CI_LZS; ++ opt_buf[1] = CILEN_LZS; ++ opt_buf[2] = go->lzs_hists >> 8; ++ opt_buf[3] = go->lzs_hists & 0xff; ++ opt_buf[4] = LZS_MODE_SEQ; ++ if (ccp_test(f->unit, opt_buf, CILEN_LZS, 0) <= 0) ++ go->lzs = 0; + } +-#endif + if (go->bsd_compress) { + opt_buf[0] = CI_BSD_COMPRESS; + opt_buf[1] = CILEN_BSD_COMPRESS; +@@ -679,7 +814,8 @@ ccp_cilen(f) + + (go->deflate? CILEN_DEFLATE: 0) + + (go->predictor_1? CILEN_PREDICTOR_1: 0) + + (go->predictor_2? CILEN_PREDICTOR_2: 0) +- + (go->mppe? CILEN_MPPE: 0); ++ + (go->lzs? CILEN_LZS: 0) ++ + ((go->mppe || go->mppc)? CILEN_MPPE: 0); + } + + /* +@@ -693,6 +829,8 @@ ccp_addci(f, p, lenp) + { + int res; + ccp_options *go = &ccp_gotoptions[f->unit]; ++ ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + u_char *p0 = p; + + /* +@@ -701,22 +839,43 @@ ccp_addci(f, p, lenp) + * in case it gets Acked. + */ + #ifdef MPPE +- if (go->mppe) { ++ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) { + u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; + +- p[0] = opt_buf[0] = CI_MPPE; +- p[1] = opt_buf[1] = CILEN_MPPE; +- MPPE_OPTS_TO_CI(go->mppe, &p[2]); +- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); ++ p[0] = CI_MPPE; ++ p[1] = CILEN_MPPE; ++ p[2] = (go->mppe_stateless ? MPPE_STATELESS : 0); ++ p[3] = 0; ++ p[4] = 0; ++ p[5] = (go->mppe_40 ? MPPE_40BIT : 0) | (go->mppe_56 ? MPPE_56BIT : 0) | ++ (go->mppe_128 ? MPPE_128BIT : 0) | (go->mppc ? MPPE_MPPC : 0); ++ ++ BCOPY(p, opt_buf, CILEN_MPPE); + BCOPY(mppe_recv_key, &opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN); + res = ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0); +- if (res > 0) ++ if (res > 0) { + p += CILEN_MPPE; +- else ++ } else { + /* This shouldn't happen, we've already tested it! */ +- lcp_close(f->unit, "MPPE required but not available in kernel"); ++ go->mppe = go->mppe_40 = go->mppe_56 = go->mppe_128 = ++ go->mppe_stateless = go->mppc = 0; ++ if (ccp_wantoptions[f->unit].mppe) ++ lcp_close(f->unit, "MPPE required but not available in kernel"); ++ } ++ } ++#endif /* MPPE */ ++ if (go->lzs) { ++ p[0] = CI_LZS; ++ p[1] = CILEN_LZS; ++ p[2] = go->lzs_hists >> 8; ++ p[3] = go->lzs_hists & 0xff; ++ p[4] = LZS_MODE_SEQ; ++ res = ccp_test(f->unit, p, CILEN_LZS, 0); ++ if (res > 0) { ++ p += CILEN_LZS; ++ } else ++ go->lzs = 0; + } +-#endif + if (go->deflate) { + p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT; + p[1] = CILEN_DEFLATE; +@@ -802,7 +961,7 @@ ccp_addci(f, p, lenp) + + /* + * ccp_ackci - process a received configure-ack, and return +- * 1 iff the packet was OK. ++ * 1 if the packet was OK. + */ + static int + ccp_ackci(f, p, len) +@@ -811,24 +970,44 @@ ccp_ackci(f, p, len) + int len; + { + ccp_options *go = &ccp_gotoptions[f->unit]; ++ ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + u_char *p0 = p; + + #ifdef MPPE +- if (go->mppe) { +- u_char opt_buf[CILEN_MPPE]; +- +- opt_buf[0] = CI_MPPE; +- opt_buf[1] = CILEN_MPPE; +- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); +- if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE)) ++ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) { ++ if (len < CILEN_MPPE ++ || p[1] != CILEN_MPPE || p[0] != CI_MPPE ++ || p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) ++ || p[3] != 0 ++ || p[4] != 0 ++ || (p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0)) ++ && p[5] != ((go->mppe_56 ? MPPE_56BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0)) ++ && p[5] != ((go->mppe_128 ? MPPE_128BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0)))) + return 0; ++ if (go->mppe_40 || go->mppe_56 || go->mppe_128) ++ go->mppe = 1; + p += CILEN_MPPE; + len -= CILEN_MPPE; ++ /* Cope with first/fast ack */ ++ if (p == p0 && len == 0) ++ return 1; ++ } ++#endif /* MPPE */ ++ if (go->lzs) { ++ if (len < CILEN_LZS || p[0] != CI_LZS || p[1] != CILEN_LZS ++ || p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff) ++ || p[4] != LZS_MODE_SEQ) ++ return 0; ++ p += CILEN_LZS; ++ len -= CILEN_LZS; + /* XXX Cope with first/fast ack */ +- if (len == 0) ++ if (p == p0 && len == 0) + return 1; + } +-#endif + if (go->deflate) { + if (len < CILEN_DEFLATE + || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) +@@ -891,7 +1070,7 @@ ccp_ackci(f, p, len) + + /* + * ccp_nakci - process received configure-nak. +- * Returns 1 iff the nak was OK. ++ * Returns 1 if the nak was OK. + */ + static int + ccp_nakci(f, p, len, treat_as_reject) +@@ -901,6 +1080,8 @@ ccp_nakci(f, p, len, treat_as_reject) + int treat_as_reject; + { + ccp_options *go = &ccp_gotoptions[f->unit]; ++ ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + ccp_options no; /* options we've seen already */ + ccp_options try; /* options to ask for next time */ + +@@ -908,28 +1089,100 @@ ccp_nakci(f, p, len, treat_as_reject) + try = *go; + + #ifdef MPPE +- if (go->mppe && len >= CILEN_MPPE +- && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { +- no.mppe = 1; +- /* +- * Peer wants us to use a different strength or other setting. +- * Fail if we aren't willing to use his suggestion. +- */ +- MPPE_CI_TO_OPTS(&p[2], try.mppe); +- if ((try.mppe & MPPE_OPT_STATEFUL) && refuse_mppe_stateful) { +- error("Refusing MPPE stateful mode offered by peer"); +- try.mppe = 0; +- } else if (((go->mppe | MPPE_OPT_STATEFUL) & try.mppe) != try.mppe) { +- /* Peer must have set options we didn't request (suggest) */ +- try.mppe = 0; ++ if ((go->mppe || go->mppc || (!wo->mppe && ao->mppe)) && ++ len >= CILEN_MPPE && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { ++ ++ if (go->mppc) { ++ no.mppc = 1; ++ if (!(p[5] & MPPE_MPPC)) ++ try.mppc = 0; + } + +- if (!try.mppe) { +- error("MPPE required but peer negotiation failed"); +- lcp_close(f->unit, "MPPE required but peer negotiation failed"); ++ if (go->mppe) ++ no.mppe = 1; ++ if (go->mppe_40) ++ no.mppe_40 = 1; ++ if (go->mppe_56) ++ no.mppe_56 = 1; ++ if (go->mppe_128) ++ no.mppe_128 = 1; ++ if (go->mppe_stateless) ++ no.mppe_stateless = 1; ++ ++ if (ao->mppe_40) { ++ if ((p[5] & MPPE_40BIT)) ++ try.mppe_40 = 1; ++ else ++ try.mppe_40 = (p[5] == 0) ? 1 : 0; + } ++ if (ao->mppe_56) { ++ if ((p[5] & MPPE_56BIT)) ++ try.mppe_56 = 1; ++ else ++ try.mppe_56 = (p[5] == 0) ? 1 : 0; ++ } ++ if (ao->mppe_128) { ++ if ((p[5] & MPPE_128BIT)) ++ try.mppe_128 = 1; ++ else ++ try.mppe_128 = (p[5] == 0) ? 1 : 0; ++ } ++ ++ if (ao->mppe_stateless) { ++ if ((p[2] & MPPE_STATELESS) || wo->mppe_stateless) ++ try.mppe_stateless = 1; ++ else ++ try.mppe_stateless = 0; ++ } ++ ++ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) { ++ try.mppe = try.mppe_stateless = 0; ++ if (wo->mppe) { ++ /* we require encryption, but peer doesn't support it ++ so we close connection */ ++ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = ++ wo->mppe_56 = wo->mppe_128 = 0; ++ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE " ++ "key length"); ++ } ++ } ++ if (wo->mppe && (wo->mppe_40 != try.mppe_40) && ++ (wo->mppe_56 != try.mppe_56) && (wo->mppe_128 != try.mppe_128)) { ++ /* cannot negotiate key length */ ++ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = ++ wo->mppe_56 = wo->mppe_128 = 0; ++ lcp_close(f->unit, "Cannot negotiate MPPE key length"); ++ } ++ if (try.mppe_40 && try.mppe_56 && try.mppe_128) ++ try.mppe_40 = try.mppe_56 = 0; ++ else ++ if (try.mppe_56 && try.mppe_128) ++ try.mppe_56 = 0; ++ else ++ if (try.mppe_40 && try.mppe_128) ++ try.mppe_40 = 0; ++ else ++ if (try.mppe_40 && try.mppe_56) ++ try.mppe_40 = 0; ++ ++ p += CILEN_MPPE; ++ len -= CILEN_MPPE; + } + #endif /* MPPE */ ++ ++ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) { ++ no.lzs = 1; ++ if (((p[2]<<8)|p[3]) > 1 || (p[4] != LZS_MODE_SEQ && ++ p[4] != LZS_MODE_EXT)) ++ try.lzs = 0; ++ else { ++ try.lzs_mode = p[4]; ++ try.lzs_hists = (p[2] << 8) | p[3]; ++ } ++ p += CILEN_LZS; ++ len -= CILEN_LZS; ++ } ++ + if (go->deflate && len >= CILEN_DEFLATE + && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) + && p[1] == CILEN_DEFLATE) { +@@ -1002,14 +1255,50 @@ ccp_rejci(f, p, len) + return -1; + + #ifdef MPPE +- if (go->mppe && len >= CILEN_MPPE ++ if ((go->mppe || go->mppc) && len >= CILEN_MPPE + && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { +- error("MPPE required but peer refused"); +- lcp_close(f->unit, "MPPE required but peer refused"); ++ ccp_options *wo = &ccp_wantoptions[f->unit]; ++ if (p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) || ++ p[3] != 0 || ++ p[4] != 0 || ++ p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) | ++ (go->mppe_56 ? MPPE_56BIT : 0) | ++ (go->mppe_128 ? MPPE_128BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0))) ++ return 0; ++ if (go->mppc) ++ try.mppc = 0; ++ if (go->mppe) { ++ try.mppe = 0; ++ if (go->mppe_40) ++ try.mppe_40 = 0; ++ if (go->mppe_56) ++ try.mppe_56 = 0; ++ if (go->mppe_128) ++ try.mppe_128 = 0; ++ if (go->mppe_stateless) ++ try.mppe_stateless = 0; ++ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) ++ try.mppe = try.mppe_stateless = 0; ++ if (wo->mppe) { /* we want MPPE but cannot negotiate key length */ ++ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = ++ wo->mppe_56 = wo->mppe_128 = 0; ++ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE " ++ "key length"); ++ } ++ } + p += CILEN_MPPE; + len -= CILEN_MPPE; + } +-#endif ++#endif /* MPPE */ ++ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) { ++ if (p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff) ++ || p[4] != go->lzs_mode) ++ return 0; ++ try.lzs = 0; ++ p += CILEN_LZS; ++ len -= CILEN_LZS; ++ } + if (go->deflate_correct && len >= CILEN_DEFLATE + && p[0] == CI_DEFLATE && p[1] == CILEN_DEFLATE) { + if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size) +@@ -1073,14 +1362,15 @@ ccp_reqci(f, p, lenp, dont_nak) + int dont_nak; + { + int ret, newret, res; +- u_char *p0, *retp; ++ u_char *p0, *retp, p2, p5; + int len, clen, type, nb; + ccp_options *ho = &ccp_hisoptions[f->unit]; + ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + #ifdef MPPE +- bool rej_for_ci_mppe = 1; /* Are we rejecting based on a bad/missing */ +- /* CI_MPPE, or due to other options? */ +-#endif ++ u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; ++/* int mtu; */ ++#endif /* MPPE */ + + ret = CONFACK; + retp = p0 = p; +@@ -1103,106 +1393,307 @@ ccp_reqci(f, p, lenp, dont_nak) + switch (type) { + #ifdef MPPE + case CI_MPPE: +- if (!ao->mppe || clen != CILEN_MPPE) { ++ if ((!ao->mppc && !ao->mppe) || clen != CILEN_MPPE) { + newret = CONFREJ; + break; + } +- MPPE_CI_TO_OPTS(&p[2], ho->mppe); + +- /* Nak if anything unsupported or unknown are set. */ +- if (ho->mppe & MPPE_OPT_UNSUPPORTED) { +- newret = CONFNAK; +- ho->mppe &= ~MPPE_OPT_UNSUPPORTED; +- } +- if (ho->mppe & MPPE_OPT_UNKNOWN) { ++ p2 = p[2]; ++ p5 = p[5]; ++ /* not sure what they want, tell 'em what we got */ ++ if (((p[2] & ~MPPE_STATELESS) != 0 || p[3] != 0 || p[4] != 0 || ++ (p[5] & ~(MPPE_40BIT | MPPE_56BIT | MPPE_128BIT | ++ MPPE_MPPC)) != 0 || p[5] == 0) || ++ (p[2] == 0 && p[3] == 0 && p[4] == 0 && p[5] == 0)) { + newret = CONFNAK; +- ho->mppe &= ~MPPE_OPT_UNKNOWN; ++ p[2] = (wo->mppe_stateless ? MPPE_STATELESS : 0); ++ p[3] = 0; ++ p[4] = 0; ++ p[5] = (wo->mppe_40 ? MPPE_40BIT : 0) | ++ (wo->mppe_56 ? MPPE_56BIT : 0) | ++ (wo->mppe_128 ? MPPE_128BIT : 0) | ++ (wo->mppc ? MPPE_MPPC : 0); ++ break; + } + +- /* Check state opt */ +- if (ho->mppe & MPPE_OPT_STATEFUL) { +- /* +- * We can Nak and request stateless, but it's a +- * lot easier to just assume the peer will request +- * it if he can do it; stateful mode is bad over +- * the Internet -- which is where we expect MPPE. +- */ +- if (refuse_mppe_stateful) { +- error("Refusing MPPE stateful mode offered by peer"); ++ if ((p[5] & MPPE_MPPC)) { ++ if (ao->mppc) { ++ ho->mppc = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ opt_buf[2] = opt_buf[3] = opt_buf[4] = 0; ++ opt_buf[5] = MPPE_MPPC; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 1) <= 0) { ++ ho->mppc = 0; ++ p[5] &= ~MPPE_MPPC; ++ newret = CONFNAK; ++ } ++ } else { + newret = CONFREJ; +- break; ++ if (wo->mppe || ao->mppe) { ++ p[5] &= ~MPPE_MPPC; ++ newret = CONFNAK; ++ } + } + } + +- /* Find out which of {S,L} are set. */ +- if ((ho->mppe & MPPE_OPT_128) +- && (ho->mppe & MPPE_OPT_40)) { +- /* Both are set, negotiate the strongest. */ ++ if (ao->mppe) ++ ho->mppe = 1; ++ ++ if ((p[2] & MPPE_STATELESS)) { ++ if (ao->mppe_stateless) { ++ if (wo->mppe_stateless) ++ ho->mppe_stateless = 1; ++ else { ++ newret = CONFNAK; ++ if (!dont_nak) ++ p[2] &= ~MPPE_STATELESS; ++ } ++ } else { ++ newret = CONFNAK; ++ if (!dont_nak) ++ p[2] &= ~MPPE_STATELESS; ++ } ++ } else { ++ if (wo->mppe_stateless && !dont_nak) { ++ wo->mppe_stateless = 0; ++ newret = CONFNAK; ++ p[2] |= MPPE_STATELESS; ++ } ++ } ++ ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT|MPPE_128BIT)) { + newret = CONFNAK; +- if (ao->mppe & MPPE_OPT_128) +- ho->mppe &= ~MPPE_OPT_40; +- else if (ao->mppe & MPPE_OPT_40) +- ho->mppe &= ~MPPE_OPT_128; +- else { +- newret = CONFREJ; +- break; ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ p[5] &= ~(MPPE_40BIT|MPPE_56BIT); ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] |= (MPPE_40BIT|MPPE_56BIT); ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56_40; ++ } ++ goto check_mppe; + } +- } else if (ho->mppe & MPPE_OPT_128) { +- if (!(ao->mppe & MPPE_OPT_128)) { +- newret = CONFREJ; +- break; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56_40; ++ } ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_56BIT|MPPE_128BIT)) { ++ newret = CONFNAK; ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ p[5] &= ~MPPE_56BIT; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] |= MPPE_56BIT; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56; ++ } ++ goto check_mppe; + } +- } else if (ho->mppe & MPPE_OPT_40) { +- if (!(ao->mppe & MPPE_OPT_40)) { +- newret = CONFREJ; +- break; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56; ++ } ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_128BIT)) { ++ newret = CONFNAK; ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ p[5] &= ~MPPE_40BIT; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] |= MPPE_40BIT; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_40; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_40; ++ } ++ if ((p[5] & ~MPPE_MPPC) == MPPE_128BIT) { ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] &= ~MPPE_128BIT; ++ newret = CONFNAK; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_128BIT; ++ newret = CONFNAK; ++ goto check_mppe; ++ } ++ check_mppe_56_40: ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT)) { ++ newret = CONFNAK; ++ if (ao->mppe_56) { ++ ho->mppe_56 = 1; ++ p[5] &= ~MPPE_40BIT; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_56 = 0; ++ p[5] |= MPPE_40BIT; ++ p[5] &= ~MPPE_56BIT; ++ newret = CONFNAK; ++ goto check_mppe_40; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_56BIT; ++ goto check_mppe_40; ++ } ++ check_mppe_56: ++ if ((p[5] & ~MPPE_MPPC) == MPPE_56BIT) { ++ if (ao->mppe_56) { ++ ho->mppe_56 = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_56 = 0; ++ p[5] &= ~MPPE_56BIT; ++ newret = CONFNAK; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_56BIT; ++ newret = CONFNAK; ++ goto check_mppe; ++ } ++ check_mppe_40: ++ if ((p[5] & ~MPPE_MPPC) == MPPE_40BIT) { ++ if (ao->mppe_40) { ++ ho->mppe_40 = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_40 = 0; ++ p[5] &= ~MPPE_40BIT; ++ newret = CONFNAK; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_40BIT; ++ } ++ ++ check_mppe: ++ if (!ho->mppe_40 && !ho->mppe_56 && !ho->mppe_128) { ++ if (wo->mppe_40 || wo->mppe_56 || wo->mppe_128) { ++ newret = CONFNAK; ++ p[2] |= (wo->mppe_stateless ? MPPE_STATELESS : 0); ++ p[5] |= (wo->mppe_40 ? MPPE_40BIT : 0) | ++ (wo->mppe_56 ? MPPE_56BIT : 0) | ++ (wo->mppe_128 ? MPPE_128BIT : 0) | ++ (wo->mppc ? MPPE_MPPC : 0); ++ } else { ++ ho->mppe = ho->mppe_stateless = 0; + } + } else { +- /* Neither are set. */ +- /* We cannot accept this. */ ++ /* MPPE is not compatible with other compression types */ ++ if (wo->mppe) { ++ ao->bsd_compress = 0; ++ ao->predictor_1 = 0; ++ ao->predictor_2 = 0; ++ ao->deflate = 0; ++ ao->lzs = 0; ++ } ++ } ++ if ((!ho->mppc || !ao->mppc) && !ho->mppe) { ++ p[2] = p2; ++ p[5] = p5; + newret = CONFNAK; + /* Give the peer our idea of what can be used, + so it can choose and confirm */ + ho->mppe = ao->mppe; + } + +- /* rebuild the opts */ +- MPPE_OPTS_TO_CI(ho->mppe, &p[2]); +- if (newret == CONFACK) { +- u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; +- int mtu; +- +- BCOPY(p, opt_buf, CILEN_MPPE); +- BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], +- MPPE_MAX_KEY_LEN); +- if (ccp_test(f->unit, opt_buf, +- CILEN_MPPE + MPPE_MAX_KEY_LEN, 1) <= 0) { +- /* This shouldn't happen, we've already tested it! */ +- error("MPPE required, but kernel has no support."); +- lcp_close(f->unit, "MPPE required but not available"); +- newret = CONFREJ; +- break; +- } +- /* +- * We need to decrease the interface MTU by MPPE_PAD +- * because MPPE frames **grow**. The kernel [must] +- * allocate MPPE_PAD extra bytes in xmit buffers. +- */ +- mtu = netif_get_mtu(f->unit); +- if (mtu) +- netif_set_mtu(f->unit, mtu - MPPE_PAD); +- else +- newret = CONFREJ; +- } ++ /* ++ * I have commented the code below because according to RFC1547 ++ * MTU is only information for higher level protocols about ++ * "the maximum allowable length for a packet (q.v.) transmitted ++ * over a point-to-point link without incurring network layer ++ * fragmentation." Of course a PPP implementation should be able ++ * to handle overhead added by MPPE - in our case apropriate code ++ * is located in drivers/net/ppp_generic.c in the kernel sources. ++ * ++ * According to RFC1661: ++ * - when negotiated MRU is less than 1500 octets, a PPP ++ * implementation must still be able to receive at least 1500 ++ * octets, ++ * - when PFC is negotiated, a PPP implementation is still ++ * required to receive frames with uncompressed protocol field. ++ * ++ * So why not to handle MPPE overhead without changing MTU value? ++ * I am sure that RFC3078, unfortunately silently, assumes that. ++ */ + + /* +- * We have accepted MPPE or are willing to negotiate +- * MPPE parameters. A CONFREJ is due to subsequent +- * (non-MPPE) processing. ++ * We need to decrease the interface MTU by MPPE_PAD ++ * because MPPE frames **grow**. The kernel [must] ++ * allocate MPPE_PAD extra bytes in xmit buffers. + */ +- rej_for_ci_mppe = 0; ++/* ++ mtu = netif_get_mtu(f->unit); ++ if (mtu) { ++ netif_set_mtu(f->unit, mtu - MPPE_PAD); ++ } else { ++ newret = CONFREJ; ++ if (ccp_wantoptions[f->unit].mppe) { ++ error("Cannot adjust MTU needed by MPPE."); ++ lcp_close(f->unit, "Cannot adjust MTU needed by MPPE."); ++ } ++ } ++*/ + break; + #endif /* MPPE */ ++ ++ case CI_LZS: ++ if (!ao->lzs || clen != CILEN_LZS) { ++ newret = CONFREJ; ++ break; ++ } ++ ++ ho->lzs = 1; ++ ho->lzs_hists = (p[2] << 8) | p[3]; ++ ho->lzs_mode = p[4]; ++ if ((ho->lzs_hists != ao->lzs_hists) || ++ (ho->lzs_mode != ao->lzs_mode)) { ++ newret = CONFNAK; ++ if (!dont_nak) { ++ p[2] = ao->lzs_hists >> 8; ++ p[3] = ao->lzs_hists & 0xff; ++ p[4] = ao->lzs_mode; ++ } else ++ break; ++ } ++ ++ if (p == p0 && ccp_test(f->unit, p, CILEN_LZS, 1) <= 0) { ++ newret = CONFREJ; ++ } ++ break; ++ + case CI_DEFLATE: + case CI_DEFLATE_DRAFT: + if (!ao->deflate || clen != CILEN_DEFLATE +@@ -1344,12 +1835,6 @@ ccp_reqci(f, p, lenp, dont_nak) + else + *lenp = retp - p0; + } +-#ifdef MPPE +- if (ret == CONFREJ && ao->mppe && rej_for_ci_mppe) { +- error("MPPE required but peer negotiation failed"); +- lcp_close(f->unit, "MPPE required but peer negotiation failed"); +- } +-#endif + return ret; + } + +@@ -1371,24 +1856,35 @@ method_name(opt, opt2) + char *p = result; + char *q = result + sizeof(result); /* 1 past result */ + +- slprintf(p, q - p, "MPPE "); +- p += 5; +- if (opt->mppe & MPPE_OPT_128) { +- slprintf(p, q - p, "128-bit "); +- p += 8; +- } +- if (opt->mppe & MPPE_OPT_40) { +- slprintf(p, q - p, "40-bit "); +- p += 7; +- } +- if (opt->mppe & MPPE_OPT_STATEFUL) +- slprintf(p, q - p, "stateful"); +- else +- slprintf(p, q - p, "stateless"); +- ++ if (opt->mppe) { ++ if (opt->mppc) { ++ slprintf(p, q - p, "MPPC/MPPE "); ++ p += 10; ++ } else { ++ slprintf(p, q - p, "MPPE "); ++ p += 5; ++ } ++ if (opt->mppe_128) { ++ slprintf(p, q - p, "128-bit "); ++ p += 8; ++ } else if (opt->mppe_56) { ++ slprintf(p, q - p, "56-bit "); ++ p += 7; ++ } else if (opt->mppe_40) { ++ slprintf(p, q - p, "40-bit "); ++ p += 7; ++ } ++ if (opt->mppe_stateless) ++ slprintf(p, q - p, "stateless"); ++ else ++ slprintf(p, q - p, "stateful"); ++ } else if (opt->mppc) ++ slprintf(p, q - p, "MPPC"); + break; + } +-#endif ++#endif /* MPPE */ ++ case CI_LZS: ++ return "Stac LZS"; + case CI_DEFLATE: + case CI_DEFLATE_DRAFT: + if (opt2 != NULL && opt2->deflate_size != opt->deflate_size) +@@ -1444,12 +1940,12 @@ ccp_up(f) + } else if (ANY_COMPRESS(*ho)) + notice("%s transmit compression enabled", method_name(ho, NULL)); + #ifdef MPPE +- if (go->mppe) { ++ if (go->mppe || go->mppc) { + BZERO(mppe_recv_key, MPPE_MAX_KEY_LEN); + BZERO(mppe_send_key, MPPE_MAX_KEY_LEN); + continue_networks(f->unit); /* Bring up IP et al */ + } +-#endif ++#endif /* MPPE */ + } + + /* +@@ -1472,7 +1968,7 @@ ccp_down(f) + lcp_close(f->unit, "MPPE disabled"); + } + } +-#endif ++#endif /* MPPE */ + } + + /* +@@ -1532,24 +2028,28 @@ ccp_printpkt(p, plen, printer, arg) + #ifdef MPPE + case CI_MPPE: + if (optlen >= CILEN_MPPE) { +- u_char mppe_opts; +- +- MPPE_CI_TO_OPTS(&p[2], mppe_opts); +- printer(arg, "mppe %s %s %s %s %s %s%s", +- (p[2] & MPPE_H_BIT)? "+H": "-H", +- (p[5] & MPPE_M_BIT)? "+M": "-M", +- (p[5] & MPPE_S_BIT)? "+S": "-S", +- (p[5] & MPPE_L_BIT)? "+L": "-L", ++ printer(arg, "mppe %s %s %s %s %s %s", ++ (p[2] & MPPE_STATELESS)? "+H": "-H", ++ (p[5] & MPPE_56BIT)? "+M": "-M", ++ (p[5] & MPPE_128BIT)? "+S": "-S", ++ (p[5] & MPPE_40BIT)? "+L": "-L", + (p[5] & MPPE_D_BIT)? "+D": "-D", +- (p[5] & MPPE_C_BIT)? "+C": "-C", +- (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": ""); +- if (mppe_opts & MPPE_OPT_UNKNOWN) ++ (p[5] & MPPE_MPPC)? "+C": "-C"); ++ if ((p[5] & ~(MPPE_56BIT | MPPE_128BIT | MPPE_40BIT | ++ MPPE_D_BIT | MPPE_MPPC)) || ++ (p[2] & ~MPPE_STATELESS)) + printer(arg, " (%.2x %.2x %.2x %.2x)", + p[2], p[3], p[4], p[5]); + p += CILEN_MPPE; + } + break; +-#endif ++#endif /* MPPE */ ++ case CI_LZS: ++ if (optlen >= CILEN_LZS) { ++ printer(arg, "lzs %.2x %.2x %.2x", p[2], p[3], p[4]); ++ p += CILEN_LZS; ++ } ++ break; + case CI_DEFLATE: + case CI_DEFLATE_DRAFT: + if (optlen >= CILEN_DEFLATE) { +@@ -1635,6 +2135,7 @@ ccp_datainput(unit, pkt, len) + error("Lost compression sync: disabling compression"); + ccp_close(unit, "Lost compression sync"); + #ifdef MPPE ++ /* My module dosn't need this. J.D., 2003-07-06 */ + /* + * If we were doing MPPE, we must also take the link down. + */ +@@ -1642,9 +2143,18 @@ ccp_datainput(unit, pkt, len) + error("Too many MPPE errors, closing LCP"); + lcp_close(unit, "Too many MPPE errors"); + } +-#endif ++#endif /* MPPE */ + } else { + /* ++ * When LZS or MPPE/MPPC is negotiated we just send CCP_RESETREQ ++ * and don't wait for CCP_RESETACK ++ */ ++ if ((ccp_gotoptions[f->unit].method == CI_LZS) || ++ (ccp_gotoptions[f->unit].method == CI_MPPE)) { ++ fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0); ++ return; ++ } ++ /* + * Send a reset-request to reset the peer's compressor. + * We don't do that if we are still waiting for an + * acknowledgement to a previous reset-request. +@@ -1675,4 +2185,3 @@ ccp_rack_timeout(arg) + } else + ccp_localstate[f->unit] &= ~RACK_PENDING; + } +- diff --git a/package/ppp/patches/patch-pppd_ccp_h b/package/ppp/patches/patch-pppd_ccp_h new file mode 100644 index 000000000..fe2c3875f --- /dev/null +++ b/package/ppp/patches/patch-pppd_ccp_h @@ -0,0 +1,20 @@ +--- ppp-2.4.4.orig/pppd/ccp.h 2004-11-04 11:02:26.000000000 +0100 ++++ ppp-2.4.4/pppd/ccp.h 2009-06-05 19:12:00.000000000 +0200 +@@ -37,9 +37,17 @@ typedef struct ccp_options { + bool predictor_2; /* do Predictor-2? */ + bool deflate_correct; /* use correct code for deflate? */ + bool deflate_draft; /* use draft RFC code for deflate? */ ++ bool lzs; /* do Stac LZS? */ ++ bool mppc; /* do MPPC? */ + bool mppe; /* do MPPE? */ ++ bool mppe_40; /* allow 40 bit encryption? */ ++ bool mppe_56; /* allow 56 bit encryption? */ ++ bool mppe_128; /* allow 128 bit encryption? */ ++ bool mppe_stateless; /* allow stateless encryption */ + u_short bsd_bits; /* # bits/code for BSD Compress */ + u_short deflate_size; /* lg(window size) for Deflate */ ++ u_short lzs_mode; /* LZS check mode */ ++ u_short lzs_hists; /* number of LZS histories */ + short method; /* code for chosen compression method */ + } ccp_options; + diff --git a/package/ppp/patches/patch-pppd_chap_ms_c b/package/ppp/patches/patch-pppd_chap_ms_c new file mode 100644 index 000000000..c20fc8163 --- /dev/null +++ b/package/ppp/patches/patch-pppd_chap_ms_c @@ -0,0 +1,22 @@ +--- ppp-2.4.4.orig/pppd/chap_ms.c 2006-05-21 13:56:40.000000000 +0200 ++++ ppp-2.4.4/pppd/chap_ms.c 2009-06-05 19:12:00.000000000 +0200 +@@ -897,13 +897,17 @@ set_mppe_enc_types(int policy, int types + /* + * Disable undesirable encryption types. Note that we don't ENABLE + * any encryption types, to avoid overriding manual configuration. ++ * ++ * It seems that 56 bit keys are unsupported in MS-RADIUS (see RFC 2548) + */ + switch(types) { + case MPPE_ENC_TYPES_RC4_40: +- ccp_wantoptions[0].mppe &= ~MPPE_OPT_128; /* disable 128-bit */ ++ ccp_wantoptions[0].mppe_128 = 0; /* disable 128-bit */ ++ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */ + break; + case MPPE_ENC_TYPES_RC4_128: +- ccp_wantoptions[0].mppe &= ~MPPE_OPT_40; /* disable 40-bit */ ++ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */ ++ ccp_wantoptions[0].mppe_40 = 0; /* disable 40-bit */ + break; + default: + break; diff --git a/package/ppp/patches/patch-pppd_main_c b/package/ppp/patches/patch-pppd_main_c new file mode 100644 index 000000000..22e6a64f8 --- /dev/null +++ b/package/ppp/patches/patch-pppd_main_c @@ -0,0 +1,81 @@ +--- ppp-2.4.4.orig/pppd/main.c 2006-06-04 05:52:50.000000000 +0200 ++++ ppp-2.4.4/pppd/main.c 2009-06-05 19:12:00.000000000 +0200 +@@ -90,6 +90,7 @@ + #include + #include + #include ++#include + + #include "pppd.h" + #include "magic.h" +@@ -227,6 +228,7 @@ static struct subprocess *children; + + /* Prototypes for procedures local to this file. */ + ++static void check_time(void); + static void setup_signals __P((void)); + static void create_pidfile __P((int pid)); + static void create_linkpidfile __P((int pid)); +@@ -529,6 +531,7 @@ main(argc, argv) + info("Starting link"); + } + ++ check_time(); + gettimeofday(&start_time, NULL); + script_unsetenv("CONNECT_TIME"); + script_unsetenv("BYTES_SENT"); +@@ -1262,6 +1265,36 @@ struct callout { + + static struct callout *callout = NULL; /* Callout list */ + static struct timeval timenow; /* Current time */ ++static long uptime_diff = 0; ++static int uptime_diff_set = 0; ++ ++static void check_time(void) ++{ ++ long new_diff; ++ struct timeval t; ++ struct sysinfo i; ++ struct callout *p; ++ ++ gettimeofday(&t, NULL); ++ sysinfo(&i); ++ new_diff = t.tv_sec - i.uptime; ++ ++ if (!uptime_diff_set) { ++ uptime_diff = new_diff; ++ uptime_diff_set = 1; ++ return; ++ } ++ ++ if ((new_diff - 5 > uptime_diff) || (new_diff + 5 < uptime_diff)) { ++ /* system time has changed, update counters and timeouts */ ++ info("System time change detected."); ++ start_time.tv_sec += new_diff - uptime_diff; ++ ++ for (p = callout; p != NULL; p = p->c_next) ++ p->c_time.tv_sec += new_diff - uptime_diff; ++ } ++ uptime_diff = new_diff; ++} + + /* + * timeout - Schedule a timeout. +@@ -1332,6 +1365,8 @@ calltimeout() + { + struct callout *p; + ++ check_time(); ++ + while (callout != NULL) { + p = callout; + +@@ -1359,6 +1394,8 @@ timeleft(tvp) + { + if (callout == NULL) + return NULL; ++ ++ check_time(); + + gettimeofday(&timenow, NULL); + tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec; diff --git a/package/ppp/patches/patch-pppd_plugins_radius_Makefile_linux b/package/ppp/patches/patch-pppd_plugins_radius_Makefile_linux new file mode 100644 index 000000000..bee2a80cf --- /dev/null +++ b/package/ppp/patches/patch-pppd_plugins_radius_Makefile_linux @@ -0,0 +1,34 @@ +--- ppp-2.4.4.orig/pppd/plugins/radius/Makefile.linux 2006-06-04 07:04:14.000000000 +0200 ++++ ppp-2.4.4/pppd/plugins/radius/Makefile.linux 2009-06-05 19:12:00.000000000 +0200 +@@ -12,7 +12,8 @@ VERSION = $(shell awk -F '"' '/VERSION/ + INSTALL = install + + PLUGIN=radius.so radattr.so radrealms.so +-CFLAGS=-I. -I../.. -I../../../include -O2 -fPIC -DRC_LOG_FACILITY=LOG_DAEMON ++COPTS = -O2 ++CFLAGS=-I. -I../.. -I../../../include $(COPTS) -fPIC -DRC_LOG_FACILITY=LOG_DAEMON + + # Uncomment the next line to include support for Microsoft's + # MS-CHAP authentication protocol. +@@ -36,9 +37,9 @@ all: $(PLUGIN) + + install: all + $(INSTALL) -d -m 755 $(LIBDIR) +- $(INSTALL) -s -c -m 755 radius.so $(LIBDIR) +- $(INSTALL) -s -c -m 755 radattr.so $(LIBDIR) +- $(INSTALL) -s -c -m 755 radrealms.so $(LIBDIR) ++ $(INSTALL) -c -m 755 radius.so $(LIBDIR) ++ $(INSTALL) -c -m 755 radattr.so $(LIBDIR) ++ $(INSTALL) -c -m 755 radrealms.so $(LIBDIR) + $(INSTALL) -c -m 444 pppd-radius.8 $(MANDIR) + $(INSTALL) -c -m 444 pppd-radattr.8 $(MANDIR) + +@@ -54,7 +55,7 @@ radrealms.so: radrealms.o + CLIENTOBJS = avpair.o buildreq.o config.o dict.o ip_util.o \ + clientid.o sendserver.o lock.o util.o md5.o + libradiusclient.a: $(CLIENTOBJS) +- $(AR) rv $@ $? ++ $(TARGET_AR) rcsv $@ $? + + clean: + rm -f *.o *.so *.a diff --git a/package/ppp/patches/patch-pppd_plugins_radius_etc_radiusclient_conf b/package/ppp/patches/patch-pppd_plugins_radius_etc_radiusclient_conf new file mode 100644 index 000000000..e18dab332 --- /dev/null +++ b/package/ppp/patches/patch-pppd_plugins_radius_etc_radiusclient_conf @@ -0,0 +1,38 @@ +--- ppp-2.4.4.orig/pppd/plugins/radius/etc/radiusclient.conf 2004-11-14 00:48:39.000000000 +0100 ++++ ppp-2.4.4/pppd/plugins/radius/etc/radiusclient.conf 2009-06-05 19:12:00.000000000 +0200 +@@ -22,7 +22,7 @@ nologin /etc/nologin + + # name of the issue file. it's only display when no username is passed + # on the radlogin command line (default /etc/radiusclient/issue) +-issue /usr/local/etc/radiusclient/issue ++issue /etc/radiusclient/issue + + # RADIUS settings + +@@ -43,22 +43,22 @@ acctserver localhost:1813 + + # file holding shared secrets used for the communication + # between the RADIUS client and server +-servers /usr/local/etc/radiusclient/servers ++servers /etc/radiusclient/servers + + # dictionary of allowed attributes and values + # just like in the normal RADIUS distributions +-dictionary /usr/local/etc/radiusclient/dictionary ++dictionary /etc/radiusclient/dictionary + + # program to call for a RADIUS authenticated login + # (default /usr/sbin/login.radius) +-login_radius /usr/local/sbin/login.radius ++login_radius /sbin/login.radius + + # file which holds sequence number for communication with the + # RADIUS server + seqfile /var/run/radius.seq + + # file which specifies mapping between ttyname and NAS-Port attribute +-mapfile /usr/local/etc/radiusclient/port-id-map ++mapfile /etc/radiusclient/port-id-map + + # default authentication realm to append to all usernames if no + # realm was explicitly specified by the user diff --git a/package/ppp/patches/patch-pppd_plugins_rp-pppoe_Makefile_linux b/package/ppp/patches/patch-pppd_plugins_rp-pppoe_Makefile_linux new file mode 100644 index 000000000..3a7439ce7 --- /dev/null +++ b/package/ppp/patches/patch-pppd_plugins_rp-pppoe_Makefile_linux @@ -0,0 +1,23 @@ +--- ppp-2.4.4.orig/pppd/plugins/rp-pppoe/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 ++++ ppp-2.4.4/pppd/plugins/rp-pppoe/Makefile.linux 2009-06-05 19:12:00.000000000 +0200 +@@ -39,9 +39,9 @@ rp-pppoe.so: libplugin.a plugin.o + + install: all + $(INSTALL) -d -m 755 $(LIBDIR) +- $(INSTALL) -s -c -m 4550 rp-pppoe.so $(LIBDIR) ++ $(INSTALL) -c -m 4550 rp-pppoe.so $(LIBDIR) + $(INSTALL) -d -m 755 $(BINDIR) +- $(INSTALL) -s -c -m 555 pppoe-discovery $(BINDIR) ++ $(INSTALL) -c -m 555 pppoe-discovery $(BINDIR) + + clean: + rm -f *.o *.so +@@ -50,7 +50,7 @@ plugin.o: plugin.c + $(CC) '-DRP_VERSION="$(VERSION)"' $(CFLAGS) -I../../.. -c -o plugin.o -fPIC plugin.c + + libplugin.a: discovery.o if.o common.o debug.o +- $(AR) -rc $@ $^ ++ $(TARGET_AR) -rcs $@ $^ + + discovery.o: discovery.c + $(CC) $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o discovery.o -fPIC discovery.c diff --git a/package/ppp/patches/patch-pppd_plugins_rp-pppoe_discovery_c b/package/ppp/patches/patch-pppd_plugins_rp-pppoe_discovery_c new file mode 100644 index 000000000..ee40108d5 --- /dev/null +++ b/package/ppp/patches/patch-pppd_plugins_rp-pppoe_discovery_c @@ -0,0 +1,27 @@ +--- ppp-2.4.4.orig/pppd/plugins/rp-pppoe/discovery.c 2005-03-22 11:22:32.000000000 +0100 ++++ ppp-2.4.4/pppd/plugins/rp-pppoe/discovery.c 2009-06-05 19:12:00.000000000 +0200 +@@ -607,12 +607,14 @@ discovery(PPPoEConnection *conn) + conn->discoveryState = STATE_SENT_PADI; + waitForPADO(conn, timeout); + ++#if 0 + /* If we're just probing for access concentrators, don't do + exponential backoff. This reduces the time for an unsuccessful + probe to 15 seconds. */ + if (!conn->printACNames) { + timeout *= 2; + } ++#endif + if (conn->printACNames && conn->numPADOs) { + break; + } +@@ -635,7 +637,9 @@ discovery(PPPoEConnection *conn) + sendPADR(conn); + conn->discoveryState = STATE_SENT_PADR; + waitForPADS(conn, timeout); ++#if 0 + timeout *= 2; ++#endif + } while (conn->discoveryState == STATE_SENT_PADR); + + /* We're done. */ diff --git a/package/ppp/patches/patch-pppd_pppd_8 b/package/ppp/patches/patch-pppd_pppd_8 new file mode 100644 index 000000000..4e19f91d2 --- /dev/null +++ b/package/ppp/patches/patch-pppd_pppd_8 @@ -0,0 +1,77 @@ +--- ppp-2.4.4.orig/pppd/pppd.8 2006-06-16 02:01:23.000000000 +0200 ++++ ppp-2.4.4/pppd/pppd.8 2009-06-05 19:12:00.000000000 +0200 +@@ -627,9 +627,29 @@ control, as for the \fIcrtscts\fR option + Enables the use of PPP multilink; this is an alias for the `multilink' + option. This option is currently only available under Linux. + .TP +-.B mppe\-stateful +-Allow MPPE to use stateful mode. Stateless mode is still attempted first. +-The default is to disallow stateful mode. ++.B mppc ++Enables MPPC (Microsoft Point to Point Compression). This is the default. ++.TP ++.B mppe \fIsubopt1[,subopt2[,subopt3[..]]] ++Modify MPPE (Microsoft Point to Point Encryption) parameters. In order ++for MPPE to successfully come up, you must have authenticated with either ++MS-CHAP or MS-CHAPv2. By default MPPE is optional, it means that pppd will ++not propose MPPE to the peer, but will negotiate MPPE if peer wants that. ++You can change this using \fIrequired\fR suboption. ++This option is presently only supported under Linux, and only if your ++kernel has been configured to include MPPE support. ++.IP ++MPPE suboptions: ++.br ++\fIrequired\fR - require MPPE; disconnect if peer doesn't support it, ++.br ++\fIstateless\fR - try to negotiate stateless mode; default is stateful, ++.br ++\fIno40\fR - disable 40 bit keys, ++.br ++\fIno56\fR - disable 56 bit keys, ++.br ++\fIno128\fR - disable 128 bit keys + .TP + .B mpshortseq + Enables the use of short (12-bit) sequence numbers in multilink +@@ -767,17 +787,11 @@ peer is buggy. + Disables the use of PPP multilink. This option is currently only + available under Linux. + .TP +-.B nomppe +-Disables MPPE (Microsoft Point to Point Encryption). This is the default. +-.TP +-.B nomppe\-40 +-Disable 40-bit encryption with MPPE. +-.TP +-.B nomppe\-128 +-Disable 128-bit encryption with MPPE. ++.B nomppc ++Disables MPPC (Microsoft Point to Point Compression). + .TP +-.B nomppe\-stateful +-Disable MPPE stateful mode. This is the default. ++.B nomppe ++Disables MPPE (Microsoft Point to Point Encryption). + .TP + .B nompshortseq + Disables the use of short (12-bit) sequence numbers in the PPP +@@ -958,19 +972,6 @@ peer using PAP. + Require the peer to authenticate itself using CHAP [Challenge + Handshake Authentication Protocol] authentication. + .TP +-.B require\-mppe +-Require the use of MPPE (Microsoft Point to Point Encryption). This +-option disables all other compression types. This option enables +-both 40-bit and 128-bit encryption. In order for MPPE to successfully +-come up, you must have authenticated with either MS\-CHAP or MS\-CHAPv2. +-This option is presently only supported under Linux, and only if your +-kernel has been configured to include MPPE support. +-.TP +-.B require\-mppe\-40 +-Require the use of MPPE, with 40-bit encryption. +-.TP +-.B require\-mppe\-128 +-Require the use of MPPE, with 128-bit encryption. + .TP + .B require\-mschap + Require the peer to authenticate itself using MS\-CHAP [Microsoft Challenge diff --git a/package/ppp/patches/patch-pppd_sys-linux_c b/package/ppp/patches/patch-pppd_sys-linux_c new file mode 100644 index 000000000..94c9e7a2e --- /dev/null +++ b/package/ppp/patches/patch-pppd_sys-linux_c @@ -0,0 +1,16 @@ +--- ppp-2.4.4.orig/pppd/sys-linux.c 2005-08-27 00:44:35.000000000 +0200 ++++ ppp-2.4.4/pppd/sys-linux.c 2009-06-05 19:12:00.000000000 +0200 +@@ -453,6 +453,13 @@ int generic_establish_ppp (int fd) + if (new_style_driver) { + int flags; + ++ /* if a ppp_fd is already open, close it first */ ++ if(ppp_fd > 0) { ++ close(ppp_fd); ++ remove_fd(ppp_fd); ++ ppp_fd = -1; ++ } ++ + /* Open an instance of /dev/ppp and connect the channel to it */ + if (ioctl(fd, PPPIOCGCHAN, &chindex) == -1) { + error("Couldn't get channel number: %m"); diff --git a/package/ppp/patches/patch-pppdump_Makefile_linux b/package/ppp/patches/patch-pppdump_Makefile_linux new file mode 100644 index 000000000..10a5e2728 --- /dev/null +++ b/package/ppp/patches/patch-pppdump_Makefile_linux @@ -0,0 +1,19 @@ +--- ppp-2.4.4.orig/pppdump/Makefile.linux 2006-06-04 07:04:14.000000000 +0200 ++++ ppp-2.4.4/pppdump/Makefile.linux 2009-06-05 19:12:00.000000000 +0200 +@@ -2,7 +2,8 @@ DESTDIR = $(INSTROOT)@DESTDIR@ + BINDIR = $(DESTDIR)/sbin + MANDIR = $(DESTDIR)/share/man/man8 + +-CFLAGS= -O -I../include/net ++COPTS = -O ++CFLAGS= $(COPTS) -I../include/net + OBJS = pppdump.o bsd-comp.o deflate.o zlib.o + + INSTALL= install +@@ -17,5 +18,5 @@ clean: + + install: + mkdir -p $(BINDIR) $(MANDIR) +- $(INSTALL) -s -c pppdump $(BINDIR) ++ $(INSTALL) -c pppdump $(BINDIR) + $(INSTALL) -c -m 444 pppdump.8 $(MANDIR) diff --git a/package/ppp/patches/patch-pppstats_Makefile_linux b/package/ppp/patches/patch-pppstats_Makefile_linux new file mode 100644 index 000000000..8c02431dd --- /dev/null +++ b/package/ppp/patches/patch-pppstats_Makefile_linux @@ -0,0 +1,11 @@ +--- ppp-2.4.4.orig/pppstats/Makefile.linux 2006-06-04 07:07:46.000000000 +0200 ++++ ppp-2.4.4/pppstats/Makefile.linux 2009-06-05 19:12:00.000000000 +0200 +@@ -22,7 +22,7 @@ all: pppstats + + install: pppstats + -mkdir -p $(MANDIR) +- $(INSTALL) -s -c pppstats $(BINDIR) ++ $(INSTALL) -c pppstats $(BINDIR) + $(INSTALL) -c -m 444 pppstats.8 $(MANDIR) + + pppstats: $(PPPSTATSRCS) -- cgit v1.2.3