From 8aed1fcd443b550c15a21ddbf1b1d3899803120a Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Sun, 30 Mar 2014 15:55:20 +0200 Subject: rework hosttools building, add tools into package stuff --- config/Kconfig-language.txt | 379 -------------------------------------------- 1 file changed, 379 deletions(-) delete mode 100644 config/Kconfig-language.txt (limited to 'config/Kconfig-language.txt') diff --git a/config/Kconfig-language.txt b/config/Kconfig-language.txt deleted file mode 100644 index c412c2458..000000000 --- a/config/Kconfig-language.txt +++ /dev/null @@ -1,379 +0,0 @@ -Introduction ------------- - -The configuration database is a collection of configuration options -organized in a tree structure: - - +- Code maturity level options - | +- Prompt for development and/or incomplete code/drivers - +- General setup - | +- Networking support - | +- System V IPC - | +- BSD Process Accounting - | +- Sysctl support - +- Loadable module support - | +- Enable loadable module support - | +- Set version information on all module symbols - | +- Kernel module loader - +- ... - -Every entry has its own dependencies. These dependencies are used -to determine the visibility of an entry. Any child entry is only -visible if its parent entry is also visible. - -Menu entries ------------- - -Most entries define a config option; all other entries help to organize -them. A single configuration option is defined like this: - -config MODVERSIONS - bool "Set version information on all module symbols" - depends on MODULES - help - Usually, modules have to be recompiled whenever you switch to a new - kernel. ... - -Every line starts with a key word and can be followed by multiple -arguments. "config" starts a new config entry. The following lines -define attributes for this config option. Attributes can be the type of -the config option, input prompt, dependencies, help text and default -values. A config option can be defined multiple times with the same -name, but every definition can have only a single input prompt and the -type must not conflict. - -Menu attributes ---------------- - -A menu entry can have a number of attributes. Not all of them are -applicable everywhere (see syntax). - -- type definition: "bool"/"tristate"/"string"/"hex"/"int" - Every config option must have a type. There are only two basic types: - tristate and string; the other types are based on these two. The type - definition optionally accepts an input prompt, so these two examples - are equivalent: - - bool "Networking support" - and - bool - prompt "Networking support" - -- input prompt: "prompt" ["if" ] - Every menu entry can have at most one prompt, which is used to display - to the user. Optionally dependencies only for this prompt can be added - with "if". - -- default value: "default" ["if" ] - A config option can have any number of default values. If multiple - default values are visible, only the first defined one is active. - Default values are not limited to the menu entry where they are - defined. This means the default can be defined somewhere else or be - overridden by an earlier definition. - The default value is only assigned to the config symbol if no other - value was set by the user (via the input prompt above). If an input - prompt is visible the default value is presented to the user and can - be overridden by him. - Optionally, dependencies only for this default value can be added with - "if". - -- type definition + default value: - "def_bool"/"def_tristate" ["if" ] - This is a shorthand notation for a type definition plus a value. - Optionally dependencies for this default value can be added with "if". - -- dependencies: "depends on" - This defines a dependency for this menu entry. If multiple - dependencies are defined, they are connected with '&&'. Dependencies - are applied to all other options within this menu entry (which also - accept an "if" expression), so these two examples are equivalent: - - bool "foo" if BAR - default y if BAR - and - depends on BAR - bool "foo" - default y - -- reverse dependencies: "select" ["if" ] - While normal dependencies reduce the upper limit of a symbol (see - below), reverse dependencies can be used to force a lower limit of - another symbol. The value of the current menu symbol is used as the - minimal value can be set to. If is selected multiple - times, the limit is set to the largest selection. - Reverse dependencies can only be used with boolean or tristate - symbols. - Note: - select should be used with care. select will force - a symbol to a value without visiting the dependencies. - By abusing select you are able to select a symbol FOO even - if FOO depends on BAR that is not set. - In general use select only for non-visible symbols - (no prompts anywhere) and for symbols with no dependencies. - That will limit the usefulness but on the other hand avoid - the illegal configurations all over. - kconfig should one day warn about such things. - -- numerical ranges: "range" ["if" ] - This allows to limit the range of possible input values for int - and hex symbols. The user can only input a value which is larger than - or equal to the first symbol and smaller than or equal to the second - symbol. - -- help text: "help" or "---help---" - This defines a help text. The end of the help text is determined by - the indentation level, this means it ends at the first line which has - a smaller indentation than the first line of the help text. - "---help---" and "help" do not differ in behaviour, "---help---" is - used to help visually separate configuration logic from help within - the file as an aid to developers. - -- misc options: "option" [=] - Various less common options can be defined via this option syntax, - which can modify the behaviour of the menu entry and its config - symbol. These options are currently possible: - - - "defconfig_list" - This declares a list of default entries which can be used when - looking for the default configuration (which is used when the main - .config doesn't exists yet.) - - - "modules" - This declares the symbol to be used as the MODULES symbol, which - enables the third modular state for all config symbols. - - - "env"= - This imports the environment variable into Kconfig. It behaves like - a default, except that the value comes from the environment, this - also means that the behaviour when mixing it with normal defaults is - undefined at this point. The symbol is currently not exported back - to the build environment (if this is desired, it can be done via - another symbol). - -Menu dependencies ------------------ - -Dependencies define the visibility of a menu entry and can also reduce -the input range of tristate symbols. The tristate logic used in the -expressions uses one more state than normal boolean logic to express the -module state. Dependency expressions have the following syntax: - - ::= (1) - '=' (2) - '!=' (3) - '(' ')' (4) - '!' (5) - '&&' (6) - '||' (7) - -Expressions are listed in decreasing order of precedence. - -(1) Convert the symbol into an expression. Boolean and tristate symbols - are simply converted into the respective expression values. All - other symbol types result in 'n'. -(2) If the values of both symbols are equal, it returns 'y', - otherwise 'n'. -(3) If the values of both symbols are equal, it returns 'n', - otherwise 'y'. -(4) Returns the value of the expression. Used to override precedence. -(5) Returns the result of (2-/expr/). -(6) Returns the result of min(/expr/, /expr/). -(7) Returns the result of max(/expr/, /expr/). - -An expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2 -respectively for calculations). A menu entry becomes visible when it's -expression evaluates to 'm' or 'y'. - -There are two types of symbols: constant and non-constant symbols. -Non-constant symbols are the most common ones and are defined with the -'config' statement. Non-constant symbols consist entirely of alphanumeric -characters or underscores. -Constant symbols are only part of expressions. Constant symbols are -always surrounded by single or double quotes. Within the quote, any -other character is allowed and the quotes can be escaped using '\'. - -Menu structure --------------- - -The position of a menu entry in the tree is determined in two ways. First -it can be specified explicitly: - -menu "Network device support" - depends on NET - -config NETDEVICES - ... - -endmenu - -All entries within the "menu" ... "endmenu" block become a submenu of -"Network device support". All subentries inherit the dependencies from -the menu entry, e.g. this means the dependency "NET" is added to the -dependency list of the config option NETDEVICES. - -The other way to generate the menu structure is done by analyzing the -dependencies. If a menu entry somehow depends on the previous entry, it -can be made a submenu of it. First, the previous (parent) symbol must -be part of the dependency list and then one of these two conditions -must be true: -- the child entry must become invisible, if the parent is set to 'n' -- the child entry must only be visible, if the parent is visible - -config MODULES - bool "Enable loadable module support" - -config MODVERSIONS - bool "Set version information on all module symbols" - depends on MODULES - -comment "module support disabled" - depends on !MODULES - -MODVERSIONS directly depends on MODULES, this means it's only visible if -MODULES is different from 'n'. The comment on the other hand is always -visible when MODULES is visible (the (empty) dependency of MODULES is -also part of the comment dependencies). - - -Kconfig syntax --------------- - -The configuration file describes a series of menu entries, where every -line starts with a keyword (except help texts). The following keywords -end a menu entry: -- config -- menuconfig -- choice/endchoice -- comment -- menu/endmenu -- if/endif -- source -The first five also start the definition of a menu entry. - -config: - - "config" - - -This defines a config symbol and accepts any of above -attributes as options. - -menuconfig: - "menuconfig" - - -This is similar to the simple config entry above, but it also gives a -hint to front ends, that all suboptions should be displayed as a -separate list of options. - -choices: - - "choice" - - - "endchoice" - -This defines a choice group and accepts any of the above attributes as -options. A choice can only be of type bool or tristate, while a boolean -choice only allows a single config entry to be selected, a tristate -choice also allows any number of config entries to be set to 'm'. This -can be used if multiple drivers for a single hardware exists and only a -single driver can be compiled/loaded into the kernel, but all drivers -can be compiled as modules. -A choice accepts another option "optional", which allows to set the -choice to 'n' and no entry needs to be selected. - -comment: - - "comment" - - -This defines a comment which is displayed to the user during the -configuration process and is also echoed to the output files. The only -possible options are dependencies. - -menu: - - "menu" - - - "endmenu" - -This defines a menu block, see "Menu structure" above for more -information. The only possible options are dependencies. - -if: - - "if" - - "endif" - -This defines an if block. The dependency expression is appended -to all enclosed menu entries. - -source: - - "source" - -This reads the specified configuration file. This file is always parsed. - -mainmenu: - - "mainmenu" - -This sets the config program's title bar if the config program chooses -to use it. - - -Kconfig hints -------------- -This is a collection of Kconfig tips, most of which aren't obvious at -first glance and most of which have become idioms in several Kconfig -files. - -Adding common features and make the usage configurable -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -It is a common idiom to implement a feature/functionality that are -relevant for some architectures but not all. -The recommended way to do so is to use a config variable named HAVE_* -that is defined in a common Kconfig file and selected by the relevant -architectures. -An example is the generic IOMAP functionality. - -We would in lib/Kconfig see: - -# Generic IOMAP is used to ... -config HAVE_GENERIC_IOMAP - -config GENERIC_IOMAP - depends on HAVE_GENERIC_IOMAP && FOO - -And in lib/Makefile we would see: -obj-$(CONFIG_GENERIC_IOMAP) += iomap.o - -For each architecture using the generic IOMAP functionality we would see: - -config X86 - select ... - select HAVE_GENERIC_IOMAP - select ... - -Note: we use the existing config option and avoid creating a new -config variable to select HAVE_GENERIC_IOMAP. - -Note: the use of the internal config variable HAVE_GENERIC_IOMAP, it is -introduced to overcome the limitation of select which will force a -config option to 'y' no matter the dependencies. -The dependencies are moved to the symbol GENERIC_IOMAP and we avoid the -situation where select forces a symbol equals to 'y'. - -Build as module only -~~~~~~~~~~~~~~~~~~~~ -To restrict a component build to module-only, qualify its config symbol -with "depends on m". E.g.: - -config FOO - depends on BAR && m - -limits FOO to module (=m) or disabled (=n). - -- cgit v1.2.3