From 0e930c133951dffe8c933fe02f67e72fec57dc8d Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Wed, 24 Aug 2011 06:08:24 +0200 Subject: sync patch with OpenWrt, combine both targets (rb411/rb433) --- mk/rootfs.mk | 2 +- package/adkinstall/Makefile | 5 +- target/linux/Config.in | 1 + target/linux/config/Config.in.flash | 3 +- target/linux/config/Config.in.netdevice | 3 +- target/linux/config/Config.in.spi | 14 + target/linux/patches/2.6.39/rb4xx.patch | 36530 ++++++++++++++++++----------- target/mips/Makefile | 6 +- target/mips/kernel.config | 212 +- target/mips/sys-available/mikrotik-rb411 | 13 - target/mips/sys-available/mikrotik-rb433 | 13 - target/mips/sys-available/mikrotik-rb4xx | 15 + 12 files changed, 23402 insertions(+), 13415 deletions(-) create mode 100644 target/linux/config/Config.in.spi delete mode 100644 target/mips/sys-available/mikrotik-rb411 delete mode 100644 target/mips/sys-available/mikrotik-rb433 create mode 100644 target/mips/sys-available/mikrotik-rb4xx diff --git a/mk/rootfs.mk b/mk/rootfs.mk index 241a237fa..5080944e6 100644 --- a/mk/rootfs.mk +++ b/mk/rootfs.mk @@ -17,7 +17,7 @@ ROOTFS:= root=/dev/sda2 MTDDEV:= root=/dev/mtdblock1 endif -ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB433),y) +ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB4XX),y) MTDDEV:= root=/dev/mtdblock2 endif diff --git a/package/adkinstall/Makefile b/package/adkinstall/Makefile index 6aae012f8..a4ab0d8eb 100644 --- a/package/adkinstall/Makefile +++ b/package/adkinstall/Makefile @@ -36,10 +36,7 @@ else ifeq ($(ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20),y) else ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) ${INSTALL_BIN} ./src/adkinstall.yeelong \ $(IDIR_ADKINSTALL)/sbin/adkinstall -else ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB411),y) - ${INSTALL_BIN} ./src/adkinstall.rb4xx \ - $(IDIR_ADKINSTALL)/sbin/adkinstall -else ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB433),y) +else ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB4XX),y) ${INSTALL_BIN} ./src/adkinstall.rb4xx \ $(IDIR_ADKINSTALL)/sbin/adkinstall else diff --git a/target/linux/Config.in b/target/linux/Config.in index cf4890059..7b52a3003 100644 --- a/target/linux/Config.in +++ b/target/linux/Config.in @@ -20,5 +20,6 @@ source target/linux/config/Config.in.misc source target/linux/config/Config.in.mips source target/linux/config/Config.in.lib source target/linux/config/Config.in.pm +source target/linux/config/Config.in.spi source target/linux/config/Config.in.kvm source target/linux/config/Config.in.debug diff --git a/target/linux/config/Config.in.flash b/target/linux/config/Config.in.flash index 4d9bf6828..3e2898617 100644 --- a/target/linux/config/Config.in.flash +++ b/target/linux/config/Config.in.flash @@ -43,8 +43,7 @@ config ADK_KERNEL_MTD_CFI_ADV_OPTIONS config ADK_KERNEL_MTD_NAND_RB4XX boolean - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB411 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB433 + default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX default n config ADK_KERNEL_MTD_AR7_PARTS diff --git a/target/linux/config/Config.in.netdevice b/target/linux/config/Config.in.netdevice index 1a84f6bcc..cd90f3af2 100644 --- a/target/linux/config/Config.in.netdevice +++ b/target/linux/config/Config.in.netdevice @@ -104,8 +104,7 @@ config ADK_KERNEL_AG71XX select ADK_KERNEL_NET_PCI select ADK_KERNEL_MII select ADK_KERNEL_NETDEV_1000 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB411 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB433 + default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX default n help diff --git a/target/linux/config/Config.in.spi b/target/linux/config/Config.in.spi new file mode 100644 index 000000000..a141f8231 --- /dev/null +++ b/target/linux/config/Config.in.spi @@ -0,0 +1,14 @@ +config ADK_KERNEL_SPI + boolean + +config ADK_KERNEL_SPI_AR71XX + select ADK_KERNEL_SPI + boolean + +config ADK_KERNEL_SPI_RB4XX + select ADK_KERNEL_SPI + boolean + +config ADK_KERNEL_SPI_RB4XX_CPLD + select ADK_KERNEL_SPI + boolean diff --git a/target/linux/patches/2.6.39/rb4xx.patch b/target/linux/patches/2.6.39/rb4xx.patch index 1739221bf..49fd204d7 100644 --- a/target/linux/patches/2.6.39/rb4xx.patch +++ b/target/linux/patches/2.6.39/rb4xx.patch @@ -1,548 +1,223 @@ -diff -Nur linux-2.6.39.orig/arch/mips/Kconfig linux-2.6.39/arch/mips/Kconfig ---- linux-2.6.39.orig/arch/mips/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/Kconfig 2011-05-27 14:36:50.000000000 +0200 -@@ -84,6 +84,23 @@ - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. - -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar71xx/ar71xx.c +--- linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/ar71xx.c 2011-08-24 02:41:55.227990426 +0200 +@@ -0,0 +1,230 @@ ++/* ++ * AR71xx SoC routines ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + - config BCM47XX - bool "Broadcom BCM47XX based boards" - select CEVT_R4K -@@ -740,6 +757,7 @@ - - source "arch/mips/alchemy/Kconfig" - source "arch/mips/ath79/Kconfig" -+source "arch/mips/ar71xx/Kconfig" - source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/jz4740/Kconfig" -diff -Nur linux-2.6.39.orig/arch/mips/Makefile linux-2.6.39/arch/mips/Makefile ---- linux-2.6.39.orig/arch/mips/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/Makefile 2011-05-27 14:36:50.000000000 +0200 -@@ -158,6 +158,13 @@ - endif - cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 - -+# -+# Atheros AR71xx -+# -+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ -+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx -+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 ++#include ++#include ++#include ++#include ++#include + - cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) - cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) - cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Kconfig linux-2.6.39/arch/mips/ar71xx/Kconfig ---- linux-2.6.39.orig/arch/mips/ar71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/Kconfig 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,264 @@ -+if ATHEROS_AR71XX ++#include + -+menu "Atheros AR71xx machine selection" ++static DEFINE_MUTEX(ar71xx_flash_mutex); ++static DEFINE_SPINLOCK(ar71xx_device_lock); + -+config AR71XX_MACH_AP81 -+ bool "Atheros AP81 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++void __iomem *ar71xx_ddr_base; ++EXPORT_SYMBOL_GPL(ar71xx_ddr_base); + -+config AR71XX_MACH_AP83 -+ bool "Atheros AP83 board support" -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++void __iomem *ar71xx_pll_base; ++EXPORT_SYMBOL_GPL(ar71xx_pll_base); + -+config AR71XX_MACH_DIR_600_A1 -+ bool "D-Link DIR-600 rev. A1 support" -+ select AR71XX_DEV_AP91_ETH -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n ++void __iomem *ar71xx_reset_base; ++EXPORT_SYMBOL_GPL(ar71xx_reset_base); + -+config AR71XX_MACH_DIR_615_C1 -+ bool "D-Link DIR-615 rev. C1 support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n ++void __iomem *ar71xx_gpio_base; ++EXPORT_SYMBOL_GPL(ar71xx_gpio_base); + -+config AR71XX_MACH_DIR_825_B1 -+ bool "D-Link DIR-825 rev. B1 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++void __iomem *ar71xx_usb_ctrl_base; ++EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base); + -+config AR71XX_MACH_PB42 -+ bool "Atheros PB42 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ default n ++void ar71xx_device_stop(u32 mask) ++{ ++ unsigned long flags; ++ u32 mask_inv; ++ u32 t; + -+config AR71XX_MACH_PB44 -+ bool "Atheros PB44 board support" -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_PB92 -+ bool "Atheros PB92 board support" -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB9X_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); ++ t |= mask; ++ t &= ~mask_inv; ++ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_AW_NR580 -+ bool "AzureWave AW-NR580 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ default n ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WZR_HP_G300NH -+ bool "Buffalo WZR-HP-G300NH board support" -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default y ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WP543 -+ bool "Compex WP543/WPJ543 board support" -+ select MYLOADER -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WRT160NL -+ bool "Linksys WRT160NL board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ select AR71XX_NVRAM -+ default n ++ default: ++ BUG(); ++ } ++} ++EXPORT_SYMBOL_GPL(ar71xx_device_stop); + -+config AR71XX_MACH_WRT400N -+ bool "Linksys WRT400N board support" -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n ++void ar71xx_device_start(u32 mask) ++{ ++ unsigned long flags; ++ u32 mask_inv; ++ u32 t; + -+config AR71XX_MACH_RB4XX -+ bool "MikroTik RouterBOARD 4xx series support" -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_RB750 -+ bool "MikroTik RouterBOARD 750 support" -+ select AR71XX_DEV_AP91_ETH -+ default n ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); ++ t &= ~mask; ++ t |= mask_inv; ++ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WNDR3700 -+ bool "NETGEAR WNDR3700 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WNR2000 -+ bool "NETGEAR WNR2000 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_MZK_W04NU -+ bool "Planex MZK-W04NU board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_MZK_W300NH -+ bool "Planex MZK-W300NH board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_NBG460N -+ bool "Zyxel NBG460N/550N/550NH board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR741ND -+ bool "TP-LINK TL-WR741ND support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_ETH -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR841N_V1 -+ bool "TP-LINK TL-WR841N v1 support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_DSA -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR941ND -+ bool "TP-LINK TL-WR941ND support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_DSA -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR1043ND -+ bool "TP-LINK TL-WR1043ND support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_TEW_632BRP -+ bool "TRENDnet TEW-632BRP support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n -+ -+config AR71XX_MACH_UBNT -+ bool "Ubiquiti AR71xx based boards support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_USB -+ default n -+ -+endmenu -+ -+config AR71XX_DEV_M25P80 -+ def_bool n -+ -+config AR71XX_DEV_AP91_PCI -+ def_bool n -+ -+config AR71XX_DEV_AP91_ETH -+ def_bool n -+ -+config AR71XX_DEV_AP94_PCI -+ def_bool n -+ -+config AR71XX_DEV_AR913X_WMAC -+ def_bool n -+ -+config AR71XX_DEV_DSA -+ def_bool n -+ -+config AR71XX_DEV_GPIO_BUTTONS -+ def_bool n -+ -+config AR71XX_DEV_LEDS_GPIO -+ def_bool n -+ -+config AR71XX_DEV_PB42_PCI -+ def_bool n -+ -+config AR71XX_DEV_PB9X_PCI -+ def_bool n -+ -+config AR71XX_DEV_USB -+ def_bool n -+ -+config AR71XX_NVRAM -+ def_bool n -+ -+endif -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Makefile linux-2.6.39/arch/mips/ar71xx/Makefile ---- linux-2.6.39.orig/arch/mips/ar71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/Makefile 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,54 @@ -+# -+# Makefile for the Atheros AR71xx SoC specific parts of the kernel -+# -+# Copyright (C) 2008-2009 Gabor Juhos -+# Copyright (C) 2008 Imre Kaloz -+# -+# This program is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License version 2 as published -+# by the Free Software Foundation. -+ -+obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o -+ -+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -+obj-$(CONFIG_PCI) += pci.o -+ -+obj-$(CONFIG_AR71XX_DEV_AP91_ETH) += dev-ap91-eth.o -+obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o -+obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o -+obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC) += dev-ar913x-wmac.o -+obj-$(CONFIG_AR71XX_DEV_DSA) += dev-dsa.o -+obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o -+obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o -+obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o -+obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o -+obj-$(CONFIG_AR71XX_DEV_PB9X_PCI) += dev-pb9x-pci.o -+obj-$(CONFIG_AR71XX_DEV_USB) += dev-usb.o -+ -+obj-$(CONFIG_AR71XX_NVRAM) += nvram.o -+ -+obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o -+obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o -+obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o -+obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o -+obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o -+obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o -+obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o -+obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o -+obj-$(CONFIG_AR71XX_MACH_NBG460N) += mach-nbg460n.o -+obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o -+obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o -+obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o -+obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o -+obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o -+obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -+obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o -+obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o -+obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o -+obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o -+obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o -+obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar71xx/ar71xx.c ---- linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/ar71xx.c 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,177 @@ -+/* -+ * AR71xx SoC routines -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+static DEFINE_MUTEX(ar71xx_flash_mutex); -+ -+void __iomem *ar71xx_ddr_base; -+EXPORT_SYMBOL_GPL(ar71xx_ddr_base); -+ -+void __iomem *ar71xx_pll_base; -+EXPORT_SYMBOL_GPL(ar71xx_pll_base); -+ -+void __iomem *ar71xx_reset_base; -+EXPORT_SYMBOL_GPL(ar71xx_reset_base); -+ -+void __iomem *ar71xx_gpio_base; -+EXPORT_SYMBOL_GPL(ar71xx_gpio_base); -+ -+void __iomem *ar71xx_usb_ctrl_base; -+EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base); -+ -+void ar71xx_device_stop(u32 mask) -+{ -+ unsigned long flags; -+ u32 mask_inv; -+ u32 t; -+ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); -+ t |= mask; -+ t &= ~mask_inv; -+ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR9130: -+ case AR71XX_SOC_AR9132: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask); -+ local_irq_restore(flags); ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + default: + BUG(); + } +} -+EXPORT_SYMBOL_GPL(ar71xx_device_stop); ++EXPORT_SYMBOL_GPL(ar71xx_device_start); + -+void ar71xx_device_start(u32 mask) ++int ar71xx_device_stopped(u32 mask) +{ + unsigned long flags; -+ u32 mask_inv; + u32 t; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: -+ local_irq_save(flags); ++ spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask); -+ local_irq_restore(flags); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: -+ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; -+ local_irq_save(flags); ++ spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); -+ t &= ~mask; -+ t |= mask_inv; -+ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); -+ local_irq_restore(flags); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: -+ local_irq_save(flags); ++ spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask); -+ local_irq_restore(flags); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; ++ ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; ++ ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + default: + BUG(); + } ++ ++ return ((t & mask) == mask); +} -+EXPORT_SYMBOL_GPL(ar71xx_device_start); ++EXPORT_SYMBOL_GPL(ar71xx_device_stopped); + -+int ar71xx_device_stopped(u32 mask) ++void ar71xx_ddr_flush(u32 reg) +{ -+ unsigned long flags; -+ u32 t; -+ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR9130: -+ case AR71XX_SOC_AR9132: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); -+ local_irq_restore(flags); -+ break; -+ -+ default: -+ BUG(); -+ } -+ -+ return ((t & mask) == mask); -+} -+EXPORT_SYMBOL_GPL(ar71xx_device_stopped); -+ -+void ar71xx_ddr_flush(u32 reg) -+{ -+ ar71xx_ddr_wr(reg, 1); -+ while ((ar71xx_ddr_rr(reg) & 0x1)); ++ ar71xx_ddr_wr(reg, 1); ++ while ((ar71xx_ddr_rr(reg) & 0x1)) ++ ; + + ar71xx_ddr_wr(reg, 1); -+ while ((ar71xx_ddr_rr(reg) & 0x1)); ++ while ((ar71xx_ddr_rr(reg) & 0x1)) ++ ; +} +EXPORT_SYMBOL_GPL(ar71xx_ddr_flush); + @@ -557,111 +232,10 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar7 + mutex_unlock(&ar71xx_flash_mutex); +} +EXPORT_SYMBOL_GPL(ar71xx_flash_release); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.c linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.c 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,70 @@ -+/* -+ * Atheros AP91 reference board ethernet initialization -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "devices.h" -+#include "dev-dsa.h" -+#include "dev-ap91-eth.h" -+ -+static struct dsa_chip_data ap91_dsa_chip = { -+ .port_names[0] = "cpu", -+ .port_names[1] = "lan1", -+ .port_names[2] = "lan2", -+ .port_names[3] = "lan3", -+ .port_names[4] = "lan4", -+}; -+ -+static struct dsa_platform_data ap91_dsa_data = { -+ .nr_chips = 1, -+ .chip = &ap91_dsa_chip, -+}; -+ -+static void ap91_eth_set_port_name(unsigned port, const char *name) -+{ -+ if (port < 1 || port > 5) -+ return; -+ -+ if (name) -+ ap91_dsa_chip.port_names[port] = (char *) name; -+} -+ -+void __init ap91_eth_init(u8 *mac_addr, const char *port_names[]) -+{ -+ if (mac_addr) -+ ar71xx_set_mac_base(mac_addr); -+ -+ if (port_names) { -+ int i; -+ -+ for (i = 0; i < AP91_ETH_NUM_PORT_NAMES; i++) -+ ap91_eth_set_port_name(i + 1, port_names[i]); -+ } -+ -+ /* WAN port */ -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000; -+ ar71xx_eth0_data.fifo_cfg2 = 0x00001fff; -+ ar71xx_eth0_data.fifo_cfg3 = 0x008001ff; -+ -+ /* LAN ports */ -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.speed = SPEED_1000; -+ ar71xx_eth1_data.duplex = DUPLEX_FULL; -+ ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000; -+ ar71xx_eth1_data.fifo_cfg2 = 0x00001fff; -+ ar71xx_eth1_data.fifo_cfg3 = 0x008001ff; -+ -+ ar71xx_add_device_mdio(0x0); -+ ar71xx_add_device_eth(1); -+ ar71xx_add_device_eth(0); -+ -+ ar71xx_add_device_dsa(1, &ap91_dsa_data); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.h linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.h 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,23 @@ -+/* -+ * Atheros AP91 reference board ethernet initialization -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_AP91_ETH_H -+#define _AR71XX_DEV_AP91_ETH_H -+ -+#define AP91_ETH_NUM_PORT_NAMES 4 -+ -+#if defined(CONFIG_AR71XX_DEV_AP91_ETH) -+void ap91_eth_init(u8 *mac_addr, const char *port_names[]) __init; -+#else -+static inline void ap91_eth_init(u8 *mac_addr) { } -+#endif -+ -+#endif /* _AR71XX_DEV_AP91_ETH_H */ -+ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,114 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c 2011-08-24 02:41:55.277990824 +0200 +@@ -0,0 +1,71 @@ +/* + * Atheros AP91 reference board PCI initialization + * @@ -680,10 +254,12 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi +#include + +#include "dev-ap91-pci.h" ++#include "pci-ath9k-fixup.h" + -+static struct ath9k_platform_data ap91_wmac_data; ++static struct ath9k_platform_data ap91_wmac_data = { ++ .led_pin = -1, ++}; +static char ap91_wmac_mac[6]; -+static int ap91_pci_fixup_enabled; + +static struct ar71xx_pci_irq ap91_pci_irqs[] __initdata = { + { @@ -695,7 +271,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi + +static int ap91_pci_plat_dev_init(struct pci_dev *dev) +{ -+ switch(PCI_SLOT(dev->devfn)) { ++ switch (PCI_SLOT(dev->devfn)) { + case 0: + dev->dev.platform_data = &ap91_wmac_data; + break; @@ -704,61 +280,16 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi + return 0; +} + -+static void ap91_pci_fixup(struct pci_dev *dev) ++__init void ap91_pci_setup_wmac_led_pin(int pin) +{ -+ void __iomem *mem; -+ u16 *cal_data; -+ u16 cmd; -+ u32 val; -+ -+ if (!ap91_pci_fixup_enabled) -+ return; -+ -+ printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev)); -+ -+ cal_data = ap91_wmac_data.eeprom_data; -+ if (*cal_data != 0xa55a) { -+ printk(KERN_ERR "PCI: no calibration data found for %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); -+ if (!mem) { -+ printk(KERN_ERR "PCI: ioremap error for device %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ /* Setup the PCI device to allow access to the internal registers */ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ /* set pointer to first reg address */ -+ cal_data += 3; -+ while (*cal_data != 0xffff) { -+ u32 reg; -+ reg = *cal_data++; -+ val = *cal_data++; -+ val |= (*cal_data++) << 16; -+ -+ __raw_writel(val, mem + reg); -+ udelay(100); -+ } -+ -+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); -+ dev->vendor = val & 0xffff; -+ dev->device = (val >> 16) & 0xffff; -+ -+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); -+ dev->revision = val & 0xff; -+ dev->class = val >> 8; /* upper 3 bytes */ ++ ap91_wmac_data.led_pin = pin; ++} + -+ iounmap(mem); ++__init void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) ++{ ++ ap91_wmac_data.gpio_mask = mask; ++ ap91_wmac_data.gpio_val = val; +} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ap91_pci_fixup); + +void __init ap91_pci_init(u8 *cal_data, u8 *mac_addr) +{ @@ -774,12 +305,12 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi + ar71xx_pci_plat_dev_init = ap91_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(ap91_pci_irqs), ap91_pci_irqs); + -+ ap91_pci_fixup_enabled = 1; ++ pci_enable_ath9k_fixup(0, ap91_wmac_data.eeprom_data); +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,21 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,25 @@ +/* + * Atheros AP91 reference board PCI initialization + * @@ -795,16 +326,20 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h linux-2.6.39/arch/mi + +#if defined(CONFIG_AR71XX_DEV_AP91_PCI) +void ap91_pci_init(u8 *cal_data, u8 *mac_addr) __init; ++void ap91_pci_setup_wmac_led_pin(int pin) __init; ++void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) __init; +#else +static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) { } ++static inline void ap91_pci_setup_wmac_led_pin(int pin) { } ++static inline void ap91_pci_setup_wmac_gpio(u32 mask, u32 gpio) { } +#endif + +#endif /* _AR71XX_DEV_AP91_PCI_H */ + diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,159 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,109 @@ +/* + * Atheros AP94 reference board PCI initialization + * @@ -823,28 +358,32 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mi +#include + +#include "dev-ap94-pci.h" ++#include "pci-ath9k-fixup.h" + -+static struct ath9k_platform_data ap94_wmac0_data; -+static struct ath9k_platform_data ap94_wmac1_data; ++static struct ath9k_platform_data ap94_wmac0_data = { ++ .led_pin = -1, ++}; ++static struct ath9k_platform_data ap94_wmac1_data = { ++ .led_pin = -1, ++}; +static char ap94_wmac0_mac[6]; +static char ap94_wmac1_mac[6]; -+static int ap94_pci_fixup_enabled; + +static struct ar71xx_pci_irq ap94_pci_irqs[] __initdata = { -+ { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, -+ }, { -+ .slot = 1, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV1, -+ } ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ }, { ++ .slot = 1, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV1, ++ } +}; + +static int ap94_pci_plat_dev_init(struct pci_dev *dev) +{ -+ switch(PCI_SLOT(dev->devfn)) { ++ switch (PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &ap94_wmac0_data; + break; @@ -857,85 +396,30 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mi + return 0; +} + -+static void ap94_pci_fixup(struct pci_dev *dev) ++__init void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) +{ -+ void __iomem *mem; -+ u16 *cal_data; -+ u16 cmd; -+ u32 bar0; -+ u32 val; -+ -+ if (!ap94_pci_fixup_enabled) -+ return; -+ -+ switch (PCI_SLOT(dev->devfn)) { -+ case 17: -+ cal_data = ap94_wmac0_data.eeprom_data; ++ switch (wmac) { ++ case 0: ++ ap94_wmac0_data.led_pin = pin; + break; -+ case 18: -+ cal_data = ap94_wmac1_data.eeprom_data; ++ case 1: ++ ap94_wmac1_data.led_pin = pin; + break; -+ default: -+ return; -+ } -+ -+ if (*cal_data != 0xa55a) { -+ printk(KERN_ERR "PCI: no calibration data found for %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); -+ if (!mem) { -+ printk(KERN_ERR "PCI: ioremap error for device %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev)); -+ -+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); -+ -+ /* Setup the PCI device to allow access to the internal registers */ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE); -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ /* set pointer to first reg address */ -+ cal_data += 3; -+ while (*cal_data != 0xffff) { -+ u32 reg; -+ reg = *cal_data++; -+ val = *cal_data++; -+ val |= (*cal_data++) << 16; -+ -+ __raw_writel(val, mem + reg); -+ udelay(100); + } -+ -+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); -+ dev->vendor = val & 0xffff; -+ dev->device = (val >> 16) & 0xffff; -+ -+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); -+ dev->revision = val & 0xff; -+ dev->class = val >> 8; /* upper 3 bytes */ -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); -+ -+ iounmap(mem); +} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ap94_pci_fixup); + -+void __init ap94_pci_enable_quirk_wndr3700(void) ++__init void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) +{ -+ ap94_wmac0_data.quirk_wndr3700 = 1; -+ ap94_wmac1_data.quirk_wndr3700 = 1; ++ switch (wmac) { ++ case 0: ++ ap94_wmac0_data.gpio_mask = mask; ++ ap94_wmac0_data.gpio_val = val; ++ break; ++ case 1: ++ ap94_wmac1_data.gpio_mask = mask; ++ ap94_wmac1_data.gpio_val = val; ++ break; ++ } +} + +void __init ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, @@ -962,12 +446,13 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mi + ar71xx_pci_plat_dev_init = ap94_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(ap94_pci_irqs), ap94_pci_irqs); + -+ ap94_pci_fixup_enabled = 1; ++ pci_enable_ath9k_fixup(17, ap94_wmac0_data.eeprom_data); ++ pci_enable_ath9k_fixup(18, ap94_wmac1_data.eeprom_data); +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,28 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,31 @@ +/* + * Atheros AP94 reference board PCI initialization + * @@ -985,28 +470,32 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h linux-2.6.39/arch/mi +void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) __init; + -+void ap94_pci_enable_quirk_wndr3700(void) __init; ++void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) __init; ++void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) __init; + +#else +static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) {} + -+static inline void ap94_pci_enable_quirk_wndr3700(void) {} ++static inline void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) {} ++static inline void ap94_pci_setup_wmac_gpio(unsigned wmac, ++ u32 mask, u32 val) {} +#endif + +#endif /* _AR71XX_DEV_AP94_PCI_H */ + -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,68 @@ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.c linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,154 @@ +/* -+ * Atheros AR913x SoC built-in WMAC device support ++ * Atheros AR9XXX SoCs built-in WMAC device support + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -1022,15 +511,18 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c linux-2.6.39/arch + +#include + -+#include "dev-ar913x-wmac.h" ++#include "dev-ar9xxx-wmac.h" ++ ++#define MHZ_25 (25 * 1000 * 1000) + -+static struct ath9k_platform_data ar913x_wmac_data; -+static char ar913x_wmac_mac[6]; ++static struct ath9k_platform_data ar9xxx_wmac_data = { ++ .led_pin = -1, ++}; ++static char ar9xxx_wmac_mac[6]; + -+static struct resource ar913x_wmac_resources[] = { ++static struct resource ar9xxx_wmac_resources[] = { + { -+ .start = AR91XX_WMAC_BASE, -+ .end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1, ++ /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, { + .start = AR71XX_CPU_IRQ_IP2, @@ -1039,90 +531,234 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c linux-2.6.39/arch + }, +}; + -+static struct platform_device ar913x_wmac_device = { ++static struct platform_device ar9xxx_wmac_device = { + .name = "ath9k", + .id = -1, -+ .resource = ar913x_wmac_resources, -+ .num_resources = ARRAY_SIZE(ar913x_wmac_resources), ++ .resource = ar9xxx_wmac_resources, ++ .num_resources = ARRAY_SIZE(ar9xxx_wmac_resources), + .dev = { -+ .platform_data = &ar913x_wmac_data, ++ .platform_data = &ar9xxx_wmac_data, + }, +}; + -+void __init ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr) ++static void ar913x_wmac_init(void) +{ -+ if (cal_data) -+ memcpy(ar913x_wmac_data.eeprom_data, cal_data, -+ sizeof(ar913x_wmac_data.eeprom_data)); -+ -+ if (mac_addr) { -+ memcpy(ar913x_wmac_mac, mac_addr, sizeof(ar913x_wmac_mac)); -+ ar913x_wmac_data.macaddr = ar913x_wmac_mac; -+ } -+ + ar71xx_device_stop(RESET_MODULE_AMBA2WMAC); + mdelay(10); + + ar71xx_device_start(RESET_MODULE_AMBA2WMAC); + mdelay(10); + -+ platform_device_register(&ar913x_wmac_device); ++ ar9xxx_wmac_resources[0].start = AR91XX_WMAC_BASE; ++ ar9xxx_wmac_resources[0].end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1; +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.h linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,19 @@ -+/* -+ * Atheros AR913x SoC built-in WMAC device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ + -+#ifndef _AR71XX_DEV_AR913X_WMAC_H -+#define _AR71XX_DEV_AR913X_WMAC_H ++static int ar933x_r1_get_wmac_revision(void) ++{ ++ return ar71xx_soc_rev; ++} + -+void ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init; ++static int ar933x_wmac_reset(void) ++{ ++ unsigned retries = 0; + -+#endif /* _AR71XX_DEV_AR913X_WMAC_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar71xx/dev-dsa.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,50 @@ -+/* -+ * Atheros AR71xx DSA switch device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ ar71xx_device_stop(AR933X_RESET_WMAC); ++ ar71xx_device_start(AR933X_RESET_WMAC); + -+#include -+#include ++ while (1) { ++ u32 bootstrap; + -+#include ++ bootstrap = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) ++ return 0; + -+#include "devices.h" -+#include "dev-dsa.h" ++ if (retries > 20) ++ break; + -+static struct platform_device ar71xx_dsa_switch_device = { -+ .name = "dsa", -+ .id = 0, -+}; ++ udelay(10000); ++ retries++; ++ } + -+void __init ar71xx_add_device_dsa(unsigned int id, -+ struct dsa_platform_data *d) -+{ -+ int i; ++ pr_err("ar93xx: WMAC reset timed out"); ++ return -ETIMEDOUT; ++} ++ ++static void ar933x_wmac_init(void) ++{ ++ ar9xxx_wmac_device.name = "ar933x_wmac"; ++ ar9xxx_wmac_resources[0].start = AR933X_WMAC_BASE; ++ ar9xxx_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; ++ if (ar71xx_ref_freq == MHZ_25) ++ ar9xxx_wmac_data.is_clk_25mhz = true; ++ ++ if (ar71xx_soc_rev == 1) ++ ar9xxx_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; ++ ++ ar9xxx_wmac_data.external_reset = ar933x_wmac_reset; ++ ++ ar933x_wmac_reset(); ++} ++ ++static void ar934x_wmac_init(void) ++{ ++ ar9xxx_wmac_device.name = "ar934x_wmac"; ++ ar9xxx_wmac_resources[0].start = AR934X_WMAC_BASE; ++ ar9xxx_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; ++ if (ar71xx_ref_freq == MHZ_25) ++ ar9xxx_wmac_data.is_clk_25mhz = true; ++} ++ ++void __init ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) ++{ ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ ar913x_wmac_init(); ++ break; ++ ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ ar933x_wmac_init(); ++ break; ++ ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ar934x_wmac_init(); ++ break; ++ ++ default: ++ BUG(); ++ } ++ ++ if (cal_data) ++ memcpy(ar9xxx_wmac_data.eeprom_data, cal_data, ++ sizeof(ar9xxx_wmac_data.eeprom_data)); ++ ++ if (mac_addr) { ++ memcpy(ar9xxx_wmac_mac, mac_addr, sizeof(ar9xxx_wmac_mac)); ++ ar9xxx_wmac_data.macaddr = ar9xxx_wmac_mac; ++ } ++ ++ platform_device_register(&ar9xxx_wmac_device); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.h linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h 2011-08-24 02:41:55.297981663 +0200 +@@ -0,0 +1,20 @@ ++/* ++ * Atheros AR9XXX SoCs built-in WMAC device support ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_AR9XXX_WMAC_H ++#define _AR71XX_DEV_AR9XXX_WMAC_H ++ ++void ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init; ++ ++#endif /* _AR71XX_DEV_AR9XXX_WMAC_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.c linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.c 2011-08-24 02:41:55.317990461 +0200 +@@ -0,0 +1,31 @@ ++/* ++ * Atheros db120 reference board PCI initialization ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * ++ * Parts of this file are based on Atheros linux 2.6.31 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++ ++#include ++#include ++ ++#include "dev-db120-pci.h" ++ ++static struct ar71xx_pci_irq db120_pci_irqs[] __initdata = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ } ++}; ++ ++void __init db120_pci_init(void) ++{ ++ ar71xx_pci_init(ARRAY_SIZE(db120_pci_irqs), db120_pci_irqs); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.h linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.h 2011-08-24 02:41:55.327990934 +0200 +@@ -0,0 +1,22 @@ ++/* ++ * Atheros DB120 reference board PCI initialization ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * ++ * Parts of this file are based on Atheros linux 2.6.31 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_DB120_PCI_H ++#define _AR71XX_DEV_DB120_PCI_H ++ ++#if defined(CONFIG_AR71XX_DEV_DB120_PCI) ++void db120_pci_init(void); ++#else ++static inline void db120_pci_init(void) { } ++#endif ++ ++#endif /* _AR71XX_DEV_DB120_PCI_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar71xx/dev-dsa.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.c 2011-08-24 02:41:55.337990441 +0200 +@@ -0,0 +1,50 @@ ++/* ++ * Atheros AR71xx DSA switch device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include ++ ++#include "devices.h" ++#include "dev-dsa.h" ++ ++static struct platform_device ar71xx_dsa_switch_device = { ++ .name = "dsa", ++ .id = 0, ++}; ++ ++void __init ar71xx_add_device_dsa(unsigned int id, ++ struct dsa_platform_data *d) ++{ ++ int i; + + switch (id) { + case 0: @@ -1147,7 +783,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h linux-2.6.39/arch/mips/ar71xx/dev-dsa.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.h 2011-05-27 14:36:51.000000000 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.h 2011-08-24 02:41:55.347990727 +0200 @@ -0,0 +1,20 @@ +/* + * Atheros AR71xx DSA switch device support @@ -1171,7 +807,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h linux-2.6.39/arch/mips/ar +#endif /* _AR71XX_DEV_DSA_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c 2011-05-27 14:36:51.000000000 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c 2011-08-24 02:41:55.347990727 +0200 @@ -0,0 +1,58 @@ +/* + * Atheros AR71xx GPIO button support @@ -1185,18 +821,19 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc + */ + +#include "linux/init.h" ++#include "linux/slab.h" +#include + +#include "dev-gpio-buttons.h" + -+void __init ar71xx_add_device_gpio_buttons(int id, -+ unsigned poll_interval, -+ unsigned nbuttons, -+ struct gpio_button *buttons) ++void __init ar71xx_register_gpio_keys_polled(int id, ++ unsigned poll_interval, ++ unsigned nbuttons, ++ struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; -+ struct gpio_buttons_platform_data pdata; -+ struct gpio_button *p; ++ struct gpio_keys_platform_data pdata; ++ struct gpio_keys_button *p; + int err; + + p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); @@ -1205,7 +842,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc + + memcpy(p, buttons, nbuttons * sizeof(*p)); + -+ pdev = platform_device_alloc("gpio-buttons", id); ++ pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + @@ -1218,7 +855,6 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc + if (err) + goto err_put_pdev; + -+ + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; @@ -1233,8 +869,8 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,25 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h 2011-08-24 02:41:55.347990727 +0200 +@@ -0,0 +1,23 @@ +/* + * Atheros AR71xx GPIO button support + * @@ -1250,1169 +886,1121 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h linux-2.6.39/arc +#define _AR71XX_DEV_GPIO_BUTTONS_H + +#include -+#include -+ -+#include ++#include + -+void ar71xx_add_device_gpio_buttons(int id, -+ unsigned poll_interval, -+ unsigned nbuttons, -+ struct gpio_button *buttons) __init; ++void ar71xx_register_gpio_keys_polled(int id, ++ unsigned poll_interval, ++ unsigned nbuttons, ++ struct gpio_keys_button *buttons); + +#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,57 @@ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.c linux-2.6.39/arch/mips/ar71xx/devices.c +--- linux-2.6.39.orig/arch/mips/ar71xx/devices.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/devices.c 2011-08-24 02:41:55.347990727 +0200 +@@ -0,0 +1,765 @@ +/* -+ * Atheros AR71xx GPIO LED device support ++ * Atheros AR71xx SoC platform devices + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include +#include ++#include ++#include +#include -+#include -+ -+#include "dev-leds-gpio.h" -+ -+void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds, -+ struct gpio_led *leds) -+{ -+ struct platform_device *pdev; -+ struct gpio_led_platform_data pdata; -+ struct gpio_led *p; -+ int err; ++#include + -+ p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); -+ if (!p) -+ return; ++#include ++#include + -+ memcpy(p, leds, num_leds * sizeof(*p)); ++#include "devices.h" + -+ pdev = platform_device_alloc("leds-gpio", id); -+ if (!pdev) -+ goto err_free_leds; ++unsigned char ar71xx_mac_base[ETH_ALEN] __initdata; + -+ memset(&pdata, 0, sizeof(pdata)); -+ pdata.num_leds = num_leds; -+ pdata.leds = p; ++static struct resource ar71xx_uart_resources[] = { ++ { ++ .start = AR71XX_UART_BASE, ++ .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; + -+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -+ if (err) -+ goto err_put_pdev; ++#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) ++static struct plat_serial8250_port ar71xx_uart_data[] = { ++ { ++ .mapbase = AR71XX_UART_BASE, ++ .irq = AR71XX_MISC_IRQ_UART, ++ .flags = AR71XX_UART_FLAGS, ++ .iotype = UPIO_MEM32, ++ .regshift = 2, ++ }, { ++ /* terminating entry */ ++ } ++}; + -+ err = platform_device_add(pdev); -+ if (err) -+ goto err_put_pdev; ++static struct platform_device ar71xx_uart_device = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .resource = ar71xx_uart_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_uart_resources), ++ .dev = { ++ .platform_data = ar71xx_uart_data ++ }, ++}; + -+ return; ++static struct resource ar933x_uart_resources[] = { ++ { ++ .start = AR933X_UART_BASE, ++ .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = AR71XX_MISC_IRQ_UART, ++ .end = AR71XX_MISC_IRQ_UART, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; + -+err_put_pdev: -+ platform_device_put(pdev); ++static struct ar933x_uart_platform_data ar933x_uart_data; ++static struct platform_device ar933x_uart_device = { ++ .name = "ar933x-uart", ++ .id = -1, ++ .resource = ar933x_uart_resources, ++ .num_resources = ARRAY_SIZE(ar933x_uart_resources), ++ .dev = { ++ .platform_data = &ar933x_uart_data, ++ }, ++}; + -+err_free_leds: -+ kfree(p); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,21 @@ -+/* -+ * Atheros AR71xx GPIO LED device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++void __init ar71xx_add_device_uart(void) ++{ ++ struct platform_device *pdev; + -+#ifndef _AR71XX_DEV_LEDS_GPIO_H -+#define _AR71XX_DEV_LEDS_GPIO_H ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ pdev = &ar71xx_uart_device; ++ ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq; ++ break; + -+#include ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ pdev = &ar933x_uart_device; ++ ar933x_uart_data.uartclk = ar71xx_ref_freq; ++ break; + -+void ar71xx_add_device_leds_gpio(int id, -+ unsigned num_leds, -+ struct gpio_led *leds) __init; ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ pdev = &ar71xx_uart_device; ++ ar71xx_uart_data[0].uartclk = ar71xx_ref_freq; ++ break; + -+#endif /* _AR71XX_DEV_LEDS_GPIO_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ default: ++ BUG(); ++ } + -+#include -+#include -+#include ++ platform_device_register(pdev); ++} + -+#include "devices.h" -+#include "dev-m25p80.h" -+ -+static struct spi_board_info ar71xx_spi_info[] = { ++static struct resource ar71xx_mdio_resources[] = { + { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "m25p80", ++ .name = "mdio_base", ++ .flags = IORESOURCE_MEM, ++ .start = AR71XX_GE0_BASE, ++ .end = AR71XX_GE0_BASE + 0x200 - 1, + } +}; + -+void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata) -+{ -+ ar71xx_spi_info[0].platform_data = pdata; -+ ar71xx_add_device_spi(NULL, ar71xx_spi_info, -+ ARRAY_SIZE(ar71xx_spi_info)); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,16 @@ -+/* -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++static struct ag71xx_mdio_platform_data ar71xx_mdio_data; + -+#ifndef _AR71XX_DEV_M25P80_H -+#define _AR71XX_DEV_M25P80_H ++struct platform_device ar71xx_mdio_device = { ++ .name = "ag71xx-mdio", ++ .id = -1, ++ .resource = ar71xx_mdio_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_mdio_resources), ++ .dev = { ++ .platform_data = &ar71xx_mdio_data, ++ }, ++}; + -+#include ++static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) ++{ ++ void __iomem *base; ++ u32 t; + -+void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init; ++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); + -+#endif /* _AR71XX_DEV_M25P80_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,40 @@ -+/* -+ * Atheros PB42 reference board PCI initialization -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ t = __raw_readl(base + cfg_reg); ++ t &= ~(3 << shift); ++ t |= (2 << shift); ++ __raw_writel(t, base + cfg_reg); ++ udelay(100); + -+#include ++ __raw_writel(pll_val, base + pll_reg); + -+#include -+#include ++ t |= (3 << shift); ++ __raw_writel(t, base + cfg_reg); ++ udelay(100); + -+#include "dev-pb42-pci.h" ++ t &= ~(3 << shift); ++ __raw_writel(t, base + cfg_reg); ++ udelay(100); + -+static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = { -+ { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, -+ }, { -+ .slot = 1, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV1, -+ }, { -+ .slot = 2, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV2, -+ } -+}; ++ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", ++ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); + -+void __init pb42_pci_init(void) -+{ -+ ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs); ++ iounmap(base); +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h ---- linux-2.6.39.orig/arch/mips/ar7