summaryrefslogtreecommitdiff
path: root/target/xtensa
AgeCommit message (Collapse)Author
2017-03-18xtensa: fix noMMU qemu sample, with help from MaxWaldemar Brodkorb
2016-12-31uclibc-ng: update default configsWaldemar Brodkorb
2016-12-13uClibc-ng: switch to malloc-standard as default for MMU. applications like ↵Waldemar Brodkorb
kodi crashing with malloc
2016-12-04uclibc-ng: refresh configs, enable sha512Waldemar Brodkorb
2016-10-14xtensa: fixup build for other rootfsWaldemar Brodkorb
2016-07-18xtensa: no extra u-boot required anymoreWaldemar Brodkorb
2016-06-26xtensa: allow to build big endian toolchainWaldemar Brodkorb
Thanks Max for the overlay and hints.
2016-03-16disable uClibc-ng obstack, gdb/binutils has its own copyWaldemar Brodkorb
2016-03-07rework menu based config systemWaldemar Brodkorb
After the addition of bare metal toolchains the menu system allowed to create non-valid configurations. I reworked it so we can also add other operating system support if we wish. So first you choose your operating system, then your architecture and endianess, after that your embedded system, emulator or generic device and then you choose your task you want to run. Tasks may be toolchain, a new appliance/application or some preconfigured sets of packages and configurations as kodi, mpd, firefox and more. The tasks are limited to a plausible choice of hardware and software. Deduplicate CPU configuration. You don't wanna compile Kodi for a H8/300 microcontroller ;)
2016-02-07uclibc-ng: simplify config, only use uclibc-ng.config as git master is now ↵Waldemar Brodkorb
1.0 config
2016-01-10update to uClibc-ng 1.0.11, enable argp option, refresh configsWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2015-12-27add fsf xtensa overlayWaldemar Brodkorb
2015-12-27more xtensa improvementsWaldemar Brodkorb
2015-12-27use Image.elf for Xtensa-nommu as suggested by MaxWaldemar Brodkorb
2015-12-26add experimental support for xtensa de212 coreWaldemar Brodkorb
2015-11-12do not allow to build broken kernel images with compressionWaldemar Brodkorb
Some targets do not support compressed kernels or initramfs. OpenADK combines both, there is no support for mixed setups. For example Kernel with gzip, initramfs with xz. Qemu-Metag f.e. can only use uncompressed initramfs. The kernel could be compressed, but mixed setup isn't available for now.
2015-10-25disable UCLIBC_HAS_FENV for git configs, tooWaldemar Brodkorb
2015-10-25uClibc-ng: disable UCLIBC_HAS_FENV in the default configWaldemar Brodkorb
2015-10-24add new symbol for systems with tcp/ip but without netdevice. like arc ↵Waldemar Brodkorb
simulator running test-suites with network functions
2015-08-13kernel: make net and block support optionalWaldemar Brodkorb
2015-08-03rework kernel module infrastructureWaldemar Brodkorb
Instead of maintaining mk/modules.mk which defines compilations of related kernel modules to pack together into a single package, follow an automatic approach: For every kernel module found in the modules installation directory, create a single package. There are a few caveats to cover: === Module Loading Order === Upon bootup, module loading is ordered based on the number-prefixed files in /etc/modules.d/. The correct number was previously managed in mk/modules.mk on a per-collection basis. The new approach is to have levels which modules are to be assigned to. Level 0 contains modules with no dependencies at all. Level 1 contains modules which have only level 0 dependencies, and so on. This information is determined at compile-time by make-module-ipkgs.sh. === Module Installation to Target RootFS === Since module packages are created automatically from the modules the script finds, ADK build system has no knowledge about the connection between what the user has selected in menuconfig and the actual module packages. Therefore the earlier approach to install selected packages into rootfs does not hold anymore. Instead, use wildcards to find all packages in firmware directory prefixed by 'kmod-' and install them all (hopefully doing the right thing). === Kernel Version === KERNEL_VERSION now contains KERNEL_RELEASE already By creating a localversion file, make KERNEL_RELEASE part of the kernel's version number (so KERNEL_VERSION is correct in most situations) Signed-off-by: Phil Sutter <phil@nwl.cc>
2015-07-03do not enable PCI in kernel by defaultWaldemar Brodkorb
2015-06-02add missing kernel symbols to bootup Xtensa board via NFSWaldemar Brodkorb
2015-05-22add basic xilinx kintex7 xtensa supportWaldemar Brodkorb
2015-04-25refactor the lower case symbols outWaldemar Brodkorb
We don't need this, as ARCH is implicit through the directory. All lower case symbols should be removed now.
2015-04-14enable LDSO_RUNPATH_OF_EXECUTABLE for uClibc-ng git, tooWaldemar Brodkorb
2015-04-14LDSO_RUNPATH_OF_EXECUTABLE is required f.e. for sambaWaldemar Brodkorb
2015-04-02remove deprecated symbolsWaldemar Brodkorb
2015-03-29enable UCLIBC_HAS_UTMP for uClibc-ngWaldemar Brodkorb
2015-03-23uClibc added a new symbol for utmp supportWaldemar Brodkorb
2015-03-07xtensa can be used wth big endian modeWaldemar Brodkorb
Default for Qemu Targets is little endian. Fixup qemu example calling parameters.
2015-02-21add missing CPU symbols, sort by alphabetical orderWaldemar Brodkorb
2015-02-20use MALLOC with GLIBC_COMPAT for all archsWaldemar Brodkorb
Use MALLOC for uClibc/uClibc-ng 1.0. Choice will be removed in uClibc-ng git.
2015-02-18add support for uClibc-ng git masterWaldemar Brodkorb
Add new configs for uClibc-ng master. New symbol UCLIBC_HAS_LINUXTHREADS added. LT.new is removed in master, only LT.old and NPTL exist. CLeanup MMU/NPTL/LT support symbols. Tested with toolchain building for all supported architectures.
2015-01-02unbreak xtensa build, depend on u-boot host tool mkimage. ssl requirement ↵Waldemar Brodkorb
must be checked.
2014-12-27enable getopt longWaldemar Brodkorb
2014-12-19use the new concept of appliancesWaldemar Brodkorb
- Sync with Kernel upstream Kconfig - use new feature visible - add a patch for select on choices https://lkml.org/lkml/2011/2/17/379 - rename ADK_LINUX -> ADK_TARGET_ARCH - remove package collection feature - add appliance feature to define a appliance more complete
2014-09-28always enable pthread debug support as discussed with tgWaldemar Brodkorb
2014-09-08sync with uClibc Makefile, config files will be compatibleWaldemar Brodkorb
2014-08-25disable XSI_MATH, prevent testsuite linking failures.Waldemar Brodkorb
2014-08-12add support for xtensa dc233c variant. use uImage, which works with a ↵Waldemar Brodkorb
patched Qemu. Thanks to Max Filippov for fixes and ideas.
2014-08-12add u-boot hosttools support, remove mkimage packageWaldemar Brodkorb
2014-08-06enable backtrace support by default for uClibc-ngWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2014-07-25remove unused symbolWaldemar Brodkorb
2014-07-05update uClibc-ng to beta2Waldemar Brodkorb
2014-06-29remove RPC from uclibc, use libtirpcWaldemar Brodkorb
2014-06-29handle debug code handling inside OpenADKWaldemar Brodkorb
2014-06-27add ltp package, add more uClibc options to have a wider test rangeWaldemar Brodkorb
2014-06-21simplifyWaldemar Brodkorb
2014-06-21s/TOPDIR/ADK_TOPDIR/Waldemar Brodkorb
to avoid namespace collisions in some packages, rename TOPDIR. Sorry you need to make cleandir && make prereq && make
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 20:58:17 +0000