summaryrefslogtreecommitdiff
path: root/target/mips
AgeCommit message (Collapse)Author
2016-04-28linux: bump all kernelsWaldemar Brodkorb
2016-04-01linux: update to 4.1.20, add solidrun patch for 4.4.6Waldemar Brodkorb
2016-03-16disable uClibc-ng obstack, gdb/binutils has its own copyWaldemar Brodkorb
2016-03-07rework menu based config systemWaldemar Brodkorb
After the addition of bare metal toolchains the menu system allowed to create non-valid configurations. I reworked it so we can also add other operating system support if we wish. So first you choose your operating system, then your architecture and endianess, after that your embedded system, emulator or generic device and then you choose your task you want to run. Tasks may be toolchain, a new appliance/application or some preconfigured sets of packages and configurations as kodi, mpd, firefox and more. The tasks are limited to a plausible choice of hardware and software. Deduplicate CPU configuration. You don't wanna compile Kodi for a H8/300 microcontroller ;)
2016-02-19update older 2.6.x and 3.2.x kernelsWaldemar Brodkorb
2016-02-07uclibc-ng: simplify config, only use uclibc-ng.config as git master is now ↵Waldemar Brodkorb
1.0 config
2016-01-24linux: update to 4.1.16Waldemar Brodkorb
2016-01-10update to uClibc-ng 1.0.11, enable argp option, refresh configsWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2016-01-10mikrotik rb532 is mips32 not mips32r2Waldemar Brodkorb
2016-01-09fix openjdk8 build for rb532Waldemar Brodkorb
2015-12-24bump kernelversionsWaldemar Brodkorb
2015-12-06ath79 board supportWaldemar Brodkorb
Use full OpenWrt patch for it, as it works better on 4.1.13 kernel. Deduplicate the patches for atheros devices.
2015-11-12do not allow to build broken kernel images with compressionWaldemar Brodkorb
Some targets do not support compressed kernels or initramfs. OpenADK combines both, there is no support for mixed setups. For example Kernel with gzip, initramfs with xz. Qemu-Metag f.e. can only use uncompressed initramfs. The kernel could be compressed, but mixed setup isn't available for now.
2015-11-11qemu-mips: cleanup kernel config, fix disk bootWaldemar Brodkorb
2015-10-25disable UCLIBC_HAS_FENV for git configs, tooWaldemar Brodkorb
2015-10-25uClibc-ng: disable UCLIBC_HAS_FENV in the default configWaldemar Brodkorb
2015-10-24add new symbol for systems with tcp/ip but without netdevice. like arc ↵Waldemar Brodkorb
simulator running test-suites with network functions
2015-10-07move patch dirs, tooWaldemar Brodkorb
2015-10-07bump linux kernelsWaldemar Brodkorb
2015-09-17add 4.1.x patches for mikrotik-rb4xx, finetune mini.config, drivers should ↵Waldemar Brodkorb
go into target/linux/config
2015-09-09move serial to driver config, enable cmdlineWaldemar Brodkorb
2015-08-13kernel: make net and block support optionalWaldemar Brodkorb
2015-08-03rework kernel module infrastructureWaldemar Brodkorb
Instead of maintaining mk/modules.mk which defines compilations of related kernel modules to pack together into a single package, follow an automatic approach: For every kernel module found in the modules installation directory, create a single package. There are a few caveats to cover: === Module Loading Order === Upon bootup, module loading is ordered based on the number-prefixed files in /etc/modules.d/. The correct number was previously managed in mk/modules.mk on a per-collection basis. The new approach is to have levels which modules are to be assigned to. Level 0 contains modules with no dependencies at all. Level 1 contains modules which have only level 0 dependencies, and so on. This information is determined at compile-time by make-module-ipkgs.sh. === Module Installation to Target RootFS === Since module packages are created automatically from the modules the script finds, ADK build system has no knowledge about the connection between what the user has selected in menuconfig and the actual module packages. Therefore the earlier approach to install selected packages into rootfs does not hold anymore. Instead, use wildcards to find all packages in firmware directory prefixed by 'kmod-' and install them all (hopefully doing the right thing). === Kernel Version === KERNEL_VERSION now contains KERNEL_RELEASE already By creating a localversion file, make KERNEL_RELEASE part of the kernel's version number (so KERNEL_VERSION is correct in most situations) Signed-off-by: Phil Sutter <phil@nwl.cc>
2015-07-27mikrotik-rb4xx: update kernel patchesPhil Sutter
* fix conflict in existing patch * add build fix for newer binutils Signed-off-by: Phil Sutter <phil@nwl.cc>
2015-07-26mikrotik-rb4xx: update kernel patchesPhil Sutter
- add zboot support - workaround link state bug Signed-off-by: Phil Sutter <phil@nwl.cc>
2015-07-25mark boards as experimentalWaldemar Brodkorb
2015-07-25add experimental imgtec ci20 supportWaldemar Brodkorb
2015-07-03do not enable PCI in kernel by defaultWaldemar Brodkorb
2015-06-24bump all kernel versionsWaldemar Brodkorb
2015-05-25update kernel to 3.14.43Waldemar Brodkorb
2015-05-06add UCLIBC_HAS_CONTEXT_FUNCS for mongrel2Waldemar Brodkorb
2015-05-02update kernel versions, add separate modules-<version>.mk files to abstract ↵Waldemar Brodkorb
patch name changes
2015-04-26refactor LINUX_64 support, hide symbol for developers of boardsWaldemar Brodkorb
2015-04-25refactor the lower case symbols outWaldemar Brodkorb
We don't need this, as ARCH is implicit through the directory. All lower case symbols should be removed now.
2015-04-14enable LDSO_RUNPATH_OF_EXECUTABLE for uClibc-ng git, tooWaldemar Brodkorb
2015-04-14LDSO_RUNPATH_OF_EXECUTABLE is required f.e. for sambaWaldemar Brodkorb
2015-04-02remove deprecated symbolsWaldemar Brodkorb
2015-03-29enable UCLIBC_HAS_UTMP for uClibc-ngWaldemar Brodkorb
2015-03-23uClibc added a new symbol for utmp supportWaldemar Brodkorb
2015-03-07update all kernel versionsWaldemar Brodkorb
2015-03-03convert to upper case symbols, remove lower case ADK_big/ADK_littleWaldemar Brodkorb
2015-02-20use MALLOC with GLIBC_COMPAT for all archsWaldemar Brodkorb
Use MALLOC for uClibc/uClibc-ng 1.0. Choice will be removed in uClibc-ng git.
2015-02-18add support for uClibc-ng git masterWaldemar Brodkorb
Add new configs for uClibc-ng master. New symbol UCLIBC_HAS_LINUXTHREADS added. LT.new is removed in master, only LT.old and NPTL exist. CLeanup MMU/NPTL/LT support symbols. Tested with toolchain building for all supported architectures.
2015-02-08allow to select MIPSr2 ISA and Soft-Float for MIPS32Waldemar Brodkorb
2015-02-06rework CMDLINE generation regarding serial/vgaWaldemar Brodkorb
Use one place and not hard coded for each device. There exist use cases where on a specific device like raspberry pi, not the default 115200 baud rate is used.
2015-02-03update to 3.12.37Waldemar Brodkorb
2015-01-30update kernels, simplify dtb install, update raspberry firmware and ↵Waldemar Brodkorb
userland, fixes DMA problem fro me
2015-01-10update to latest 3.14 kernelWaldemar Brodkorb
2014-12-27enable getopt longWaldemar Brodkorb
2014-12-08bump kernel to 3.14.26Waldemar Brodkorb
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 22:34:00 +0000