summaryrefslogtreecommitdiff
path: root/package/base-files
AgeCommit message (Collapse)Author
2017-12-28generic config finetuningWaldemar Brodkorb
2017-03-16allow to disable kernel module autoloading mechanism, useful when a big ↵Waldemar Brodkorb
defconfig is used
2016-11-27finetune systemd/sysv integration, use /var tmpfs mountpointWaldemar Brodkorb
2016-11-25finalize systemd as alternative init systemWaldemar Brodkorb
Most important is the fix in patch-src_journal_journald-server_c, which breaks startup of systemd-journald when code is compiled with -DNDEBUG. A lot of base-files reorganizing to only install required files on sysv systems.
2016-11-13finetune disk mount scriptsWaldemar Brodkorb
2016-11-05base-files: finetuning, verbose mount outputWaldemar Brodkorb
2016-11-01base-files: fix a possible race condition when trying to mount usb sticks ↵Waldemar Brodkorb
and the usb-storage is included in the kernel, problem reported by Oliver
2016-11-01use TERM linux, otherwise there are problems with vimWaldemar Brodkorb
2016-10-30add ntfs-3gWaldemar Brodkorb
2016-10-29sysvinit: add experimental support for non busybox initWaldemar Brodkorb
2016-10-25allow to choose base apps, minor dot cleanupWaldemar Brodkorb
2016-09-26nfs-utils: finetuning startup scriptWaldemar Brodkorb
2016-05-08check if directory existWaldemar Brodkorb
2016-04-28rename symbol name for toolchain onlyWaldemar Brodkorb
2016-01-24reduce mksh testsuite failure to 1Waldemar Brodkorb
2015-12-25hide any errorsWaldemar Brodkorb
2015-12-24add missing netinfo fileWaldemar Brodkorb
2015-12-23optimize for really small systemsWaldemar Brodkorb
Default to busybox hush for noMMU systems. Add busybox profiles to choose a minimal busybox config for noMMU systems. Add gdb git from ysato for h8/300 simulator. Change some kernel defaults to off to have a really small kernel. For bfin simulator the kernel+initramfs is smaller then 2MB in size.
2015-12-06fix nfsroot interfaces, network is already configuredWaldemar Brodkorb
2015-11-01move remount of /dev to rcdev, to fix static /dev usageWaldemar Brodkorb
2015-11-01base-files: remove set -e, not available in ashWaldemar Brodkorb
2015-10-24forget to add new fileWaldemar Brodkorb
2015-10-24add new symbol for systems with tcp/ip but without netdevice. like arc ↵Waldemar Brodkorb
simulator running test-suites with network functions
2015-07-26package/base-files: wireless: support appending to hostapd.confPhil Sutter
This is useful for adding additional (virtual) access points. In my setup, /etc/hostapd.conf.post contains: | bss=ath6 | ssid=IPv6XS4all In /etc/network/interfaces, there is a standard entry for ath6 which defines the IP address. Maybe this could be implemented in a cleaner way by introducing a 'wireless-master' setting which points to the real wireless interface (wlan0 in my case), so ifup knows which hostapd.conf file to add the settings to.
2015-07-26package/base-files: wireless: allow setting pairwise algorithmPhil Sutter
Not perfect, since allowing WPA+WPA2 means setting wpa_pairwise as well as rsn_pairwise, but I do not want to add unnecessary complexity to interface configuration. This is relevant for my X40 with ipw2200, which bugs for CCMP pairwise cipher.
2015-07-01fix regression with new dev management change. order of execution is wrong.Waldemar Brodkorb
2015-06-28enable using udev for automatic module loadingBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
2015-06-13create mountpoints for cifs, when /media usedWaldemar Brodkorb
2015-05-06use LD_LIBRARY_PATH for all BCM28XX boardsWaldemar Brodkorb
2015-05-05allow to add a unprivileged userWaldemar Brodkorb
2015-02-10fix shadow file generationWaldemar Brodkorb
2015-02-06use a hash in the configWaldemar Brodkorb
This avoids breakage when using a # in the password. And no sensitive data is saved in clear on the target. Suggested by a Achim Marikar.
2015-02-02allow passwords with #Waldemar Brodkorb
2015-01-27add basic support for opkg, update to latest stableWaldemar Brodkorb
2015-01-13on nfsroot link /etc/resolv.conf to /proc/net/pnp to fix dns resolvingWaldemar Brodkorb
2014-12-30add default entries for ipv6Waldemar Brodkorb
2014-12-30mount can fail here, when device is not ready. will be mounted via mdev laterWaldemar Brodkorb
2014-12-28fix wpa2 configfile generation, when static network configuration is usedWaldemar Brodkorb
2014-12-27use better bannerWaldemar Brodkorb
2014-12-27fix typo, reported by JoergWaldemar Brodkorb
2014-10-17be more quietWaldemar Brodkorb
2014-10-16fix local disk mount, use [[:blank:]]Waldemar Brodkorb
2014-10-06add basic support to preconfigure wpa2Waldemar Brodkorb
2014-09-26fix sound device nameWaldemar Brodkorb
2014-08-11check for file existenceWaldemar Brodkorb
2014-07-28add some basic infrastructure for qemu-system-m68kWaldemar Brodkorb
Qemu emulates a Coldfire Evaluation board without MMU. As that is the first non-MMU platform in OpenADK I added ADK_TARGET_UCLINUX. Mksh can not be used for non-MMU, because it requires fork() for job control and other things. We use hush here. non-MMU support in uClibc does not have shared library support. Kernel does not start yet. So no runtime testing, but at least coldfire toolchain can be tested with uClibc-ng. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2014-07-22show only one ip, when default route is missingWaldemar Brodkorb
2014-07-22create mountpointWaldemar Brodkorb
2014-07-11make default mpdbox collection working out of the boxWaldemar Brodkorb
2014-07-11add bin/daemon users for ltp, finetune ltpWaldemar Brodkorb
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 22:03:29 +0000