summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/arm/Makefile20
-rw-r--r--target/armeb/Makefile16
-rw-r--r--target/cris/Makefile7
-rw-r--r--target/mips/Makefile22
-rw-r--r--target/mips64/Makefile6
-rw-r--r--target/mips64el/Makefile10
-rw-r--r--target/mipsel/Makefile34
-rw-r--r--target/native/Makefile12
-rw-r--r--target/ppc/Makefile12
-rw-r--r--target/ppc64/Makefile12
-rw-r--r--target/sparc/Makefile12
-rw-r--r--target/sparc64/Makefile12
-rw-r--r--target/x86/Makefile20
-rw-r--r--target/x86_64/Makefile14
14 files changed, 105 insertions, 104 deletions
diff --git a/target/arm/Makefile b/target/arm/Makefile
index 17ed6b4b5..c2885e917 100644
--- a/target/arm/Makefile
+++ b/target/arm/Makefile
@@ -24,7 +24,7 @@ kernel-install: tools-compile
ifeq ($(ADK_TARGET_FS),nfsroot)
imageinstall: kernel-install ${BIN_DIR}/${ROOTFSUSERTARBALL}
- @cp $(KERNEL) $(TARGET_KERNEL)
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
@echo 'Type dhcp via u-boot prompt to load kernel'
@echo 'After that type bootm to load the kernel'
endif
@@ -41,25 +41,25 @@ imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
endif
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh -f $(ADK_TARGET_ROOTFS) qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Start qemu with following options:"
- @echo 'qemu-system-arm -nographic -kernel $(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
+ @echo 'qemu-system-arm -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
- @echo 'qemu-system-arm -nographic -kernel $(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu-system-arm -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "Start qemu with following command line:"
- @echo 'qemu-system-arm -nographic -kernel $(TARGET_KERNEL)'
+ @echo 'qemu-system-arm -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
endif
diff --git a/target/armeb/Makefile b/target/armeb/Makefile
index 08ea41264..3acb6dbdb 100644
--- a/target/armeb/Makefile
+++ b/target/armeb/Makefile
@@ -11,8 +11,8 @@ KERNEL:=$(LINUX_DIR)/vmlinux
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh -f $(ADK_TARGET_ROOTFS) qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@@ -21,15 +21,15 @@ imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
- @echo 'qemu-system-arm -nographic -kernel $(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu-system-arm -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) $(TARGET_KERNEL}
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL}
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "Start qemu with following command line:"
- @echo 'qemu-system-arm -nographic -kernel $(TARGET_KERNEL)'
+ @echo 'qemu-system-arm -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
endif
diff --git a/target/cris/Makefile b/target/cris/Makefile
index 5aa8b5e93..1e072f78e 100644
--- a/target/cris/Makefile
+++ b/target/cris/Makefile
@@ -10,7 +10,7 @@ include $(TOPDIR)/mk/image.mk
KERNEL:=$(LINUX_DIR)/arch/cris/boot/zImage
$(TOOLS_BUILD_DIR):
- mkdir -p $(TOOLS_BUILD_DIR)
+ @mkdir -p $(TOOLS_BUILD_DIR)
tools-compile: $(TOOLS_BUILD_DIR)
$(MAKE) -C ../tools/mkfimage
@@ -21,7 +21,7 @@ endif
$(INSTALL_BIN) ../tools/boot_linux $(BIN_DIR)/
kernel-install: tools-compile
- PATH='${TARGET_PATH}' mkfimage $(KERNEL) $(TARGET_KERNEL)
+ PATH='${TARGET_PATH}' mkfimage $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL)
ifeq ($(ADK_TARGET_FS),squashfs)
imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS)
@@ -36,7 +36,8 @@ imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS)
endif
ifeq ($(ADK_TARGET_FS),nfsroot)
imageinstall: kernel-install ${BIN_DIR}/${ROOTFSUSERTARBALL}
- @echo Use sudo ./boot_linux -F -i ${TARGET_KERNEL} to flash the kernel
+ @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo Use sudo ./boot_linux -F -i $(BIN_DIR)/${TARGET_KERNEL} to flash the kernel
@echo Do not forget to set network boot jumper, before you start the foxboard
@echo ${ROOTFSUSERTARBALL} is your nfs root and can be extracted on your nfs server
endif
diff --git a/target/mips/Makefile b/target/mips/Makefile
index ddacbf2af..51f1824b0 100644
--- a/target/mips/Makefile
+++ b/target/mips/Makefile
@@ -16,8 +16,8 @@ kernel-install:
ifeq ($(ADK_TARGET_FS),nfsroot)
imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
- @cp $(TARGET_DIR)/boot/kernel $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(TARGET_DIR)/boot/kernel $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
endif
ifeq ($(ADK_TARGET_FS),yaffs)
@@ -29,25 +29,25 @@ imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
endif
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(TARGET_DIR)/boot/kernel $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(TARGET_DIR)/boot/kernel $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh -f $(ADK_TARGET_ROOTFS) qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Start qemu with following options:"
- @echo 'qemu-system-mips -nographic -M malta -kernel $(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
+ @echo 'qemu-system-mips -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
- @echo 'qemu-system-mips -nographic -M malta -kernel $(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu-system-mips -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "Start qemu with following command line:"
- @echo 'qemu-system-mips -nographic -M malta -kernel $(TARGET_KERNEL)'
+ @echo 'qemu-system-mips -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
endif
diff --git a/target/mips64/Makefile b/target/mips64/Makefile
index 302df24e0..12781b874 100644
--- a/target/mips64/Makefile
+++ b/target/mips64/Makefile
@@ -15,11 +15,11 @@ imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Start qemu with following options:"
- @echo 'qemu-system-mips64 -nographic -M malta -kernel $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
+ @echo 'qemu-system-mips64 -nographic -M malta -kernel $(BIN_DIR)/${TARGET_KERNEL} -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
endif
ifeq ($(FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel'
+ @echo 'The kernel file is: ${BIN_DIR}/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
- @echo 'qemu-system-mips64 -nographic -M malta -kernel $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu-system-mips64 -nographic -M malta -kernel $(BIN_DIR)/${TARGET_KERNEL} -initrd ${BIN_DIR}/${INITRAMFS}'
endif
diff --git a/target/mips64el/Makefile b/target/mips64el/Makefile
index b4bcd24f5..fbfdfc63e 100644
--- a/target/mips64el/Makefile
+++ b/target/mips64el/Makefile
@@ -11,17 +11,17 @@ KERNEL:=$(LINUX_DIR)/vmlinux
ifeq ($(FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL),"
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh -f $(ADK_TARGET_ROOTFS) qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Start qemu with following options:"
- @echo 'qemu-system-mips64el -nographic -M malta -kernel $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
+ @echo 'qemu-system-mips64el -nographic -M malta -kernel $(BIN_DIR)/${TARGET_KERNEL} -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
endif
ifeq ($(FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel
- @echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel file is: ${BIN_DIR}/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
- @echo 'qemu-system-mips64el -nographic -M malta -kernel $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu-system-mips64el -nographic -M malta -kernel $(BIN_DIR)/${TARGET_KERNEL} -initrd ${BIN_DIR}/${INITRAMFS}'
endif
diff --git a/target/mipsel/Makefile b/target/mipsel/Makefile
index 02e6057ca..752d80019 100644
--- a/target/mipsel/Makefile
+++ b/target/mipsel/Makefile
@@ -11,7 +11,7 @@ KERNEL:=$(LINUX_DIR)/vmlinux
OSTRIP:=-R .reginfo -R .notes -R .note -R .comment -R .mdebug -R .note.gnu.build-id
$(TOOLS_BUILD_DIR):
- mkdir -p $(TOOLS_BUILD_DIR)
+ @mkdir -p $(TOOLS_BUILD_DIR)
tools-compile: $(TOOLS_BUILD_DIR)
$(MAKE) -C ../tools/trx
@@ -23,7 +23,7 @@ ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_WRT54G),y)
kernel-install: tools-compile
$(TARGET_CROSS)objcopy $(OSTRIP) -S $(LINUX_DIR)/vmlinux \
$(LINUX_DIR)/vmlinuz
- @gzip -c9 $(LINUX_DIR)/vmlinuz > $(TARGET_KERNEL)
+ @gzip -c9 $(LINUX_DIR)/vmlinuz > $(BIN_DIR)/$(TARGET_KERNEL)
endif
ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_AG241),y)
@@ -33,7 +33,7 @@ kernel-install: tools-compile
PATH='${TARGET_PATH}' srec2bin $(LINUX_DIR)/vmlinux.srec $(LINUX_DIR)/vmlinux.bin
(dd if=/dev/zero bs=16 count=1; cat $(LINUX_DIR)/vmlinux.bin) > $(LINUX_DIR)/vmlinux.tmp
PATH='${TARGET_PATH}' addpattern -p AG3B -b -r 2.0 -i $(LINUX_DIR)/vmlinux.tmp \
- -o $(TARGET_KERNEL) 2>/dev/null
+ -o $(BIN_DIR)/$(TARGET_KERNEL) 2>/dev/null
endif
ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB532),y)
@@ -44,8 +44,8 @@ endif
ifeq ($(ADK_TARGET_FS),cf)
imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
- @cp $(TARGET_DIR)/boot/kernel $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(TARGET_DIR)/boot/kernel $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSUSERTARBALL)"
@echo "Boot the board via network (tftp+nfsroot) and use adkinstall."
@echo "If you just want to update, use adkupdate."
@@ -65,43 +65,43 @@ imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS)
endif
ifeq ($(ADK_TARGET_FS),nfsroot)
imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_AG241),y)
@echo 'You can flash the kernel via tftp:'
@echo 'tftp 192.168.1.1'
@echo 'tftp> binary'
- @echo 'tftp> put ${TARGET_KERNEL} upgrade_code.bin'
+ @echo 'tftp> put $(BIN_DIR)/${TARGET_KERNEL} upgrade_code.bin'
endif
ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_WRT54G),y)
@echo 'Type following on the CFE prompt to boot the kernel:'
- @echo 'CFE> boot -z -elf -tftp 192.168.1.254:${TARGET_KERNEL}'
+ @echo 'CFE> boot -z -elf -tftp 192.168.1.254:$(BIN_DIR)/${TARGET_KERNEL}'
endif
endif
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh -f $(ADK_TARGET_ROOTFS) qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Be sure to change permissions after image creation."
@echo "Start qemu with following options:"
- @echo 'qemu-system-mipsel -nographic -M malta -kernel $(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
+ @echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
- @echo 'qemu-system-mipsel -nographic -M malta -kernel $(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "Start qemu with following command line:"
- @echo 'qemu-system-mipsel -nographic -M malta -kernel $(TARGET_KERNEL)'
+ @echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
endif
ifeq ($(ADK_TARGET_FS),yaffs)
imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
diff --git a/target/native/Makefile b/target/native/Makefile
index 7b5a31d6c..a36e26bb8 100644
--- a/target/native/Makefile
+++ b/target/native/Makefile
@@ -16,14 +16,14 @@ endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel+initramfs file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel+initramfs file is: ${BIN_DIR}/${TARGET_KERNEL}'
endif
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
@@ -31,7 +31,7 @@ imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
endif
ifeq ($(ADK_TARGET_FS),nfsroot)
imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
endif
diff --git a/target/ppc/Makefile b/target/ppc/Makefile
index 9dd1f139a..a60d376a9 100644
--- a/target/ppc/Makefile
+++ b/target/ppc/Makefile
@@ -11,18 +11,18 @@ KERNEL:=$(LINUX_DIR)/arch/powerpc/boot/zImage
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
endif
diff --git a/target/ppc64/Makefile b/target/ppc64/Makefile
index 9dd1f139a..a60d376a9 100644
--- a/target/ppc64/Makefile
+++ b/target/ppc64/Makefile
@@ -11,18 +11,18 @@ KERNEL:=$(LINUX_DIR)/arch/powerpc/boot/zImage
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
endif
diff --git a/target/sparc/Makefile b/target/sparc/Makefile
index 50cfbb6ac..39212d52e 100644
--- a/target/sparc/Makefile
+++ b/target/sparc/Makefile
@@ -11,18 +11,18 @@ KERNEL:=$(LINUX_DIR)/arch/sparc/boot/zImage
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
endif
diff --git a/target/sparc64/Makefile b/target/sparc64/Makefile
index e2d9addce..9f2a152f9 100644
--- a/target/sparc64/Makefile
+++ b/target/sparc64/Makefile
@@ -11,18 +11,18 @@ KERNEL:=$(LINUX_DIR)/arch/sparc64/boot/zImage
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
endif
diff --git a/target/x86/Makefile b/target/x86/Makefile
index 4a1ea372b..436ca25ce 100644
--- a/target/x86/Makefile
+++ b/target/x86/Makefile
@@ -16,19 +16,19 @@ imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
endif
ifeq ($(ADK_TARGET_FS),nfsroot)
imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The linux kernel is here: $(TARGET_KERNEL)'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The linux kernel is here: $(BIN_DIR)/$(TARGET_KERNEL)'
@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
endif
ifeq ($(ADK_TARGET_FS),archive)
imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86),y)
- @cp $(KERNEL) $(TARGET_KERNEL)
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh -f ${ADK_TARGET_ROOTFS} qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Start qemu with following command line:"
- @echo 'qemu -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+ @echo 'qemu -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
endif
endif
ifeq ($(ADK_TARGET_FS),usb)
@@ -38,20 +38,20 @@ imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86),y)
@echo "Start qemu with following command line:"
- @echo 'qemu -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
endif
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) ${TARGET_KERNEL}
- @echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
+ @echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86),y)
@echo "Start qemu with following command line:"
- @echo 'qemu -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(TARGET_KERNEL)'
+ @echo 'qemu -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
endif
endif
diff --git a/target/x86_64/Makefile b/target/x86_64/Makefile
index ed90f443e..3ae8b112d 100644
--- a/target/x86_64/Makefile
+++ b/target/x86_64/Makefile
@@ -16,7 +16,7 @@ ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
@echo "Use following command to create a QEMU Image:"
@echo "sudo ./scripts/create-image.sh -f ${ADK_TARGET_ROOTFS} qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
@echo "Start qemu with following command line:"
- @echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+ @echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
endif
endif
ifeq ($(ADK_TARGET_FS),usb)
@@ -26,20 +26,20 @@ imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
endif
ifeq ($(ADK_TARGET_FS),initramfs)
imageinstall: $(BIN_DIR)/$(INITRAMFS)
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}
@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
@echo "Start qemu with following command line:"
- @echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+ @echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
endif
endif
ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
- @cp $(KERNEL) $(TARGET_KERNEL)
- @echo 'The kernel file is: ${TARGET_KERNEL}'
+ @cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+ @echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
@echo "Start qemu with following command line:"
- @echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(TARGET_KERNEL)'
+ @echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
endif
endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 03:47:11 +0000