summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/config/Config.in.endian.choice1
-rw-r--r--target/linux/config/Config.in.ethernet33
-rw-r--r--target/linux/config/Config.in.serial4
-rw-r--r--target/linux/config/Config.in.spi21
-rw-r--r--target/mips/kernel/mikrotik-rb4xx49
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0001-mtd-add-rb4xx-nand-driver.patch351
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0002-phy-add-ethtool-ioctl-support-used-by-ag71xx-driver.patch80
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0003-net-add-ag71xx-mac-driver.patch4185
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0005-spi-add-various-flags-to-spi_transfer-and-spi_messag.patch34
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0006-spi-add-rb4xx-SPI-driver.patch538
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0007-spi-add-rb4xx-cpld-driver.patch525
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0008-gpio-add-GPIO-latch-driver.patch290
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0009-spi-export-spi_bitbang_bufs-function.patch45
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0010-spi-add-type-field-to-spi_transfer-struct.patch37
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0012-mips-ath79-swizzle-PCI-address-for-ar71xx.patch130
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0013-net-add-swconfig-support.patch1837
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0015-phy-add-ar8216-PHY-support.patch4513
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0016-phy-mdio-bitbang-ignore-TA-value.patch44
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0017-MIPS-ath79-fix-maximum-timeout.patch37
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0018-net-allow-PHY-drivers-to-insert-packet-mangle-hooks.patch167
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0019-MIPS-ath79-process-board-cmdline-option.patch26
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0020-spi-ath79-add-fast-flash-read-support.patch202
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0021-phy-add-mdio-boardinfo.patch199
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0022-mips-ath79-add-ath79-ethernet-driver.patch1429
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0023-MIPS-ath79-add-Mikrotik-rb4xx-device-support.patch536
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0024-various-fixups-for-Werror.patch66
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0025-rb4xx_nand-add-partition-for-cfgfs.patch28
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0027-ar71xx-add-zboot-support.patch64
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0028-ag71xx-workaround-some-link-state-bug.patch39
-rw-r--r--target/mips/mikrotik-rb4xx/patches/4.1.6/0029-gpio-add-gpio-latch-driver.patch1261
-rw-r--r--target/mips/systems/mikrotik-rb4xx2
31 files changed, 16715 insertions, 58 deletions
diff --git a/target/config/Config.in.endian.choice b/target/config/Config.in.endian.choice
index cfcf209d4..2bb48a165 100644
--- a/target/config/Config.in.endian.choice
+++ b/target/config/Config.in.endian.choice
@@ -18,6 +18,7 @@ config ADK_TARGET_LITTLE_ENDIAN
bool "Little endian"
depends on !ADK_TARGET_SYSTEM_DRAGINO_MS14S
depends on !ADK_TARGET_SYSTEM_LINKSYS_NSLU2
+ depends on !ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
config ADK_TARGET_BIG_ENDIAN
bool "Big endian"
diff --git a/target/linux/config/Config.in.ethernet b/target/linux/config/Config.in.ethernet
index 7d54775a5..d36a696a2 100644
--- a/target/linux/config/Config.in.ethernet
+++ b/target/linux/config/Config.in.ethernet
@@ -8,6 +8,9 @@ config ADK_KERNEL_NET_CADENCE
config ADK_KERNEL_NET_VENDOR_AMD
bool
+config ADK_KERNEL_NET_VENDOR_ATHEROS
+ bool
+
config ADK_KERNEL_NET_VENDOR_IBM
bool
@@ -47,9 +50,15 @@ config ADK_KERNEL_NET_VENDOR_XILINX
config ADK_KERNEL_PHYLIB
bool
+config ADK_KERNEL_GENERIC_PHY
+ bool
+
config ADK_KERNEL_MII
bool
+config ADK_KERNEL_MDIO_BITBANG
+ bool
+
config ADK_KERNEL_ETRAX_HAVE_PHY
bool
@@ -69,6 +78,30 @@ config ADK_KERNEL_AT803X_PHY
tristate
select ADK_KERNEL_PHYLIB
+config ADK_KERNEL_SWCONFIG
+ bool
+
+config ADK_KERNEL_AG71XX_AR8216_SUPPORT
+ bool
+
+config ADK_KERNEL_AR8216_PHY
+ bool
+
+config ADK_KERNEL_AG71XX
+ tristate "AG71XX ethernet driver"
+ select ADK_KERNEL_NET_VENDOR_ATHEROS
+ select ADK_KERNEL_SWCONFIG
+ select ADK_KERNEL_PHYLIB
+ select ADK_KERNEL_GENERIC_PHY
+ select ADK_KERNEL_MDIO_BITBANG
+ select ADK_KERNEL_AR8216_PHY
+ select ADK_KERNEL_AG71XX_AR8216_SUPPORT
+ depends on ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
+ default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
+ default n
+ help
+ Atheros AG71XX ethernet driver
+
config ADK_KERNEL_FEC
tristate "FEC ethernet driver"
select ADK_KERNEL_NET_VENDOR_FREESCALE
diff --git a/target/linux/config/Config.in.serial b/target/linux/config/Config.in.serial
index c3c6c21ce..d7090cbf4 100644
--- a/target/linux/config/Config.in.serial
+++ b/target/linux/config/Config.in.serial
@@ -43,7 +43,8 @@ config ADK_KERNEL_SERIAL_8250
|| ADK_TARGET_SYSTEM_QEMU_OR1K \
|| ADK_TARGET_SYSTEM_QEMU_PPC_BAMBOO \
|| ADK_TARGET_SYSTEM_IBM_X40 \
- || ADK_TARGET_SYSTEM_MIKROTIK_RB532
+ || ADK_TARGET_SYSTEM_MIKROTIK_RB532 \
+ || ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
default y if ADK_TARGET_SYSTEM_XILINX_KINTEX7
default y if ADK_TARGET_SYSTEM_PCENGINES_APU
default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX
@@ -51,6 +52,7 @@ config ADK_KERNEL_SERIAL_8250
default y if ADK_TARGET_SYSTEM_QEMU_PPC_BAMBOO
default y if ADK_TARGET_SYSTEM_IBM_X40
default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532
+ default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
default n
help
Serial driver for 8250 UART chip.
diff --git a/target/linux/config/Config.in.spi b/target/linux/config/Config.in.spi
index e8a6b45bc..42bbd4b54 100644
--- a/target/linux/config/Config.in.spi
+++ b/target/linux/config/Config.in.spi
@@ -13,17 +13,11 @@ config ADK_KERNEL_SPI_MASTER
config ADK_KERNEL_SPI_BITBANG
tristate
-config ADK_KERNEL_SPI_AR71XX
- tristate
- select ADK_KERNEL_SPI
-
-config ADK_KERNEL_SPI_RB4XX
+config ADK_KERNEL_SPI_RB4XX_CPLD
tristate
- select ADK_KERNEL_SPI
-config ADK_KERNEL_SPI_RB4XX_CPLD
+config ADK_KERNEL_SPI_AR71XX
tristate
- select ADK_KERNEL_SPI
config ADK_KERNEL_SPI_PXA2XX
tristate
@@ -51,6 +45,17 @@ config ADK_KERNEL_SPI_IMX
default y if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
default n
+config ADK_KERNEL_SPI_RB4XX
+ tristate "SPI driver for Routerboard 4xx"
+ select ADK_KERNEL_SPI
+ select ADK_KERNEL_SPI_MASTER
+ select ADK_KERNEL_SPI_BITBANG
+ select ADK_KERNEL_SPI_RB4XX_CPLD
+ select ADK_KERNEL_SPI_AR71XX
+ depends on ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
+ default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
+ default n
+
config ADK_KERNEL_SPI_SPIDEV
tristate "SPI userland driver"
select ADK_KERNEL_SPI
diff --git a/target/mips/kernel/mikrotik-rb4xx b/target/mips/kernel/mikrotik-rb4xx
index ef3e9fdc3..d8a29ce89 100644
--- a/target/mips/kernel/mikrotik-rb4xx
+++ b/target/mips/kernel/mikrotik-rb4xx
@@ -1,53 +1,6 @@
CONFIG_MIPS=y
CONFIG_ATH79=y
CONFIG_ATH79_MACH_RB4XX=y
-CONFIG_32BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-CONFIG_HZ=100
CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_RB4XX=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-CONFIG_PHYLIB=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_MDIO_BITBANG=y
+CONFIG_CMDLINE_BOOL=y
CONFIG_MDIO_GPIO=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_RB4XX=y
-CONFIG_SPI_RB4XX_CPLD=y
-CONFIG_GPIO_LATCH=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_ATH79_WDT=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SPI=y
-CONFIG_LEDS_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_ATH79_WDT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_GENERIC_PHY=y
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0001-mtd-add-rb4xx-nand-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0001-mtd-add-rb4xx-nand-driver.patch
new file mode 100644
index 000000000..8199de991
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0001-mtd-add-rb4xx-nand-driver.patch
@@ -0,0 +1,351 @@
+From 1e692cc0c53202b932eedabd0315107910c5b093 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 00:08:54 +0200
+Subject: [PATCH] mtd: add rb4xx nand driver
+
+---
+ drivers/mtd/nand/Kconfig | 4 +
+ drivers/mtd/nand/Makefile | 1 +
+ drivers/mtd/nand/rb4xx_nand.c | 305 ++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 310 insertions(+)
+ create mode 100644 drivers/mtd/nand/rb4xx_nand.c
+
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 90ff447..bb01309 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -510,4 +510,8 @@ config MTD_NAND_XWAY
+ Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ to the External Bus Unit (EBU).
+
++config MTD_NAND_RB4XX
++ tristate "NAND flash driver for RouterBoard 4xx series"
++ depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index 542b568..e2b5e1c 100644
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
+ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
+diff --git a/drivers/mtd/nand/rb4xx_nand.c b/drivers/mtd/nand/rb4xx_nand.c
+new file mode 100644
+index 0000000..5b9841b
+--- /dev/null
++++ b/drivers/mtd/nand/rb4xx_nand.c
+@@ -0,0 +1,305 @@
++/*
++ * NAND flash driver for the MikroTik RouterBoard 4xx series
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This file was based on the driver for Linux 2.6.22 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/rb4xx_cpld.h>
++
++#define DRV_NAME "rb4xx-nand"
++#define DRV_VERSION "0.2.0"
++#define DRV_DESC "NAND flash driver for RouterBoard 4xx series"
++
++#define RB4XX_NAND_GPIO_READY 5
++#define RB4XX_NAND_GPIO_ALE 37
++#define RB4XX_NAND_GPIO_CLE 38
++#define RB4XX_NAND_GPIO_NCE 39
++
++struct rb4xx_nand_info {
++ struct nand_chip chip;
++ struct mtd_info mtd;
++};
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load.
++ */
++static struct nand_ecclayout rb4xx_nand_ecclayout = {
++ .eccbytes = 6,
++ .eccpos = { 8, 9, 10, 13, 14, 15 },
++ .oobavail = 9,
++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static struct mtd_partition rb4xx_nand_partitions[] = {
++ {
++ .name = "booter",
++ .offset = 0,
++ .size = (256 * 1024),
++ .mask_flags = MTD_WRITEABLE,
++ },
++ {
++ .name = "kernel",
++ .offset = (256 * 1024),
++ .size = (4 * 1024 * 1024) - (256 * 1024),
++ },
++ {
++ .name = "rootfs",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
++{
++ return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY);
++}
++
++static void rb4xx_nand_write_cmd(unsigned char cmd)
++{
++ unsigned char data = cmd;
++ int err;
++
++ err = rb4xx_cpld_write(&data, 1);
++ if (err)
++ pr_err("rb4xx_nand: write cmd failed, err=%d\n", err);
++}
++
++static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
++ unsigned int ctrl)
++{
++ if (ctrl & NAND_CTRL_CHANGE) {
++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE,
++ (ctrl & NAND_CLE) ? 1 : 0);
++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE,
++ (ctrl & NAND_ALE) ? 1 : 0);
++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE,
++ (ctrl & NAND_NCE) ? 0 : 1);
++ }
++
++ if (cmd != NAND_CMD_NONE)
++ rb4xx_nand_write_cmd(cmd);
++}
++
++static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd)
++{
++ unsigned char data = 0;
++ int err;
++
++ err = rb4xx_cpld_read(&data, NULL, 1);
++ if (err) {
++ pr_err("rb4xx_nand: read data failed, err=%d\n", err);
++ data = 0xff;
++ }
++
++ return data;
++}
++
++static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf,
++ int len)
++{
++ int err;
++
++ err = rb4xx_cpld_write(buf, len);
++ if (err)
++ pr_err("rb4xx_nand: write buf failed, err=%d\n", err);
++}
++
++static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf,
++ int len)
++{
++ int err;
++
++ err = rb4xx_cpld_read(buf, NULL, len);
++ if (err)
++ pr_err("rb4xx_nand: read buf failed, err=%d\n", err);
++}
++
++static int rb4xx_nand_probe(struct platform_device *pdev)
++{
++ struct rb4xx_nand_info *info;
++ int ret;
++
++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
++
++ ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY");
++ if (ret) {
++ dev_err(&pdev->dev, "unable to request gpio %d\n",
++ RB4XX_NAND_GPIO_READY);
++ goto err;
++ }
++
++ ret = gpio_direction_input(RB4XX_NAND_GPIO_READY);
++ if (ret) {
++ dev_err(&pdev->dev, "unable to set input mode on gpio %d\n",
++ RB4XX_NAND_GPIO_READY);
++ goto err_free_gpio_ready;
++ }
++
++ ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE");
++ if (ret) {
++ dev_err(&pdev->dev, "unable to request gpio %d\n",
++ RB4XX_NAND_GPIO_ALE);
++ goto err_free_gpio_ready;
++ }
++
++ ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0);
++ if (ret) {
++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
++ RB4XX_NAND_GPIO_ALE);
++ goto err_free_gpio_ale;
++ }
++
++ ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE");
++ if (ret) {
++ dev_err(&pdev->dev, "unable to request gpio %d\n",
++ RB4XX_NAND_GPIO_CLE);
++ goto err_free_gpio_ale;
++ }
++
++ ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0);
++ if (ret) {
++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
++ RB4XX_NAND_GPIO_CLE);
++ goto err_free_gpio_cle;
++ }
++
++ ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE");
++ if (ret) {
++ dev_err(&pdev->dev, "unable to request gpio %d\n",
++ RB4XX_NAND_GPIO_NCE);
++ goto err_free_gpio_cle;
++ }
++
++ ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1);
++ if (ret) {
++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
++ RB4XX_NAND_GPIO_ALE);
++ goto err_free_gpio_nce;
++ }
++
++ info = kzalloc(sizeof(*info), GFP_KERNEL);
++ if (!info) {
++ dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n");
++ ret = -ENOMEM;
++ goto err_free_gpio_nce;
++ }
++
++ info->chip.priv = &info;
++ info->mtd.priv = &info->chip;
++ info->mtd.owner = THIS_MODULE;
++
++ info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl;
++ info->chip.dev_ready = rb4xx_nand_dev_ready;
++ info->chip.read_byte = rb4xx_nand_read_byte;
++ info->chip.write_buf = rb4xx_nand_write_buf;
++ info->chip.read_buf = rb4xx_nand_read_buf;
++
++ info->chip.chip_delay = 25;
++ info->chip.ecc.mode = NAND_ECC_SOFT;
++
++ platform_set_drvdata(pdev, info);
++
++ ret = nand_scan_ident(&info->mtd, 1, NULL);
++ if (ret) {
++ ret = -ENXIO;
++ goto err_free_info;
++ }
++
++ if (info->mtd.writesize == 512)
++ info->chip.ecc.layout = &rb4xx_nand_ecclayout;
++
++ ret = nand_scan_tail(&info->mtd);
++ if (ret) {
++ return -ENXIO;
++ goto err_set_drvdata;
++ }
++
++ mtd_device_register(&info->mtd, rb4xx_nand_partitions,
++ ARRAY_SIZE(rb4xx_nand_partitions));
++ if (ret)
++ goto err_release_nand;
++
++ return 0;
++
++err_release_nand:
++ nand_release(&info->mtd);
++err_set_drvdata:
++ platform_set_drvdata(pdev, NULL);
++err_free_info:
++ kfree(info);
++err_free_gpio_nce:
++ gpio_free(RB4XX_NAND_GPIO_NCE);
++err_free_gpio_cle:
++ gpio_free(RB4XX_NAND_GPIO_CLE);
++err_free_gpio_ale:
++ gpio_free(RB4XX_NAND_GPIO_ALE);
++err_free_gpio_ready:
++ gpio_free(RB4XX_NAND_GPIO_READY);
++err:
++ return ret;
++}
++
++static int rb4xx_nand_remove(struct platform_device *pdev)
++{
++ struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
++
++ nand_release(&info->mtd);
++ platform_set_drvdata(pdev, NULL);
++ kfree(info);
++ gpio_free(RB4XX_NAND_GPIO_NCE);
++ gpio_free(RB4XX_NAND_GPIO_CLE);
++ gpio_free(RB4XX_NAND_GPIO_ALE);
++ gpio_free(RB4XX_NAND_GPIO_READY);
++
++ return 0;
++}
++
++static struct platform_driver rb4xx_nand_driver = {
++ .probe = rb4xx_nand_probe,
++ .remove = rb4xx_nand_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init rb4xx_nand_init(void)
++{
++ return platform_driver_register(&rb4xx_nand_driver);
++}
++
++static void __exit rb4xx_nand_exit(void)
++{
++ platform_driver_unregister(&rb4xx_nand_driver);
++}
++
++module_init(rb4xx_nand_init);
++module_exit(rb4xx_nand_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0002-phy-add-ethtool-ioctl-support-used-by-ag71xx-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0002-phy-add-ethtool-ioctl-support-used-by-ag71xx-driver.patch
new file mode 100644
index 000000000..ba7fbfad8
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0002-phy-add-ethtool-ioctl-support-used-by-ag71xx-driver.patch
@@ -0,0 +1,80 @@
+From 7b864612a6e3b139a5a607abd0048a19078fe42f Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Wed, 14 May 2014 02:55:06 +0200
+Subject: [PATCH] phy: add ethtool ioctl support, used by ag71xx driver
+
+---
+ drivers/net/phy/phy.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
+ include/linux/phy.h | 1 +
+ 2 files changed, 45 insertions(+)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index 76d96b9..9439ef3 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -293,6 +293,50 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++ u32 cmd;
++ int tmp;
++ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++ struct ethtool_value edata = { ETHTOOL_GLINK };
++
++ if (get_user(cmd, (u32 *) useraddr))
++ return -EFAULT;
++
++ switch (cmd) {
++ case ETHTOOL_GSET:
++ phy_ethtool_gset(phydev, &ecmd);
++ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++ return -EFAULT;
++ return 0;
++
++ case ETHTOOL_SSET:
++ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++ return -EFAULT;
++ return phy_ethtool_sset(phydev, &ecmd);
++
++ case ETHTOOL_NWAY_RST:
++ /* if autoneg is off, it's an error */
++ tmp = phy_read(phydev, MII_BMCR);
++ if (tmp & BMCR_ANENABLE) {
++ tmp |= (BMCR_ANRESTART);
++ phy_write(phydev, MII_BMCR, tmp);
++ return 0;
++ }
++ return -EINVAL;
++
++ case ETHTOOL_GLINK:
++ edata.data = (phy_read(phydev,
++ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++ if (copy_to_user(useraddr, &edata, sizeof(edata)))
++ return -EFAULT;
++ return 0;
++ }
++
++ return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+ * phy_mii_ioctl - generic PHY MII ioctl interface
+ * @phydev: the phy_device struct
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 565188c..9ab0d79 100644
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -628,6 +628,7 @@ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_start_interrupts(struct phy_device *phydev);
+ void phy_print_status(struct phy_device *phydev);
+ void phy_device_free(struct phy_device *phydev);
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0003-net-add-ag71xx-mac-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0003-net-add-ag71xx-mac-driver.patch
new file mode 100644
index 000000000..f8db1f2a4
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0003-net-add-ag71xx-mac-driver.patch
@@ -0,0 +1,4185 @@
+diff -Nur linux-4.1.6.orig/arch/mips/include/asm/mach-ath79/ag71xx_platform.h linux-4.1.6/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+--- linux-4.1.6.orig/arch/mips/include/asm/mach-ath79/ag71xx_platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/arch/mips/include/asm/mach-ath79/ag71xx_platform.h 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,65 @@
++/*
++ * Atheros AR71xx SoC specific platform data definitions
++ *
++ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_PLATFORM_H
++#define __ASM_MACH_ATH79_PLATFORM_H
++
++#include <linux/if_ether.h>
++#include <linux/skbuff.h>
++#include <linux/phy.h>
++#include <linux/spi/spi.h>
++
++struct ag71xx_switch_platform_data {
++ u8 phy4_mii_en:1;
++ u8 phy_poll_mask;
++};
++
++struct ag71xx_platform_data {
++ phy_interface_t phy_if_mode;
++ u32 phy_mask;
++ int speed;
++ int duplex;
++ u32 reset_bit;
++ u8 mac_addr[ETH_ALEN];
++ struct device *mii_bus_dev;
++
++ u8 has_gbit:1;
++ u8 is_ar91xx:1;
++ u8 is_ar7240:1;
++ u8 is_ar724x:1;
++ u8 has_ar8216:1;
++
++ struct ag71xx_switch_platform_data *switch_data;
++
++ void (*ddr_flush)(void);
++ void (*set_speed)(int speed);
++
++ u32 fifo_cfg1;
++ u32 fifo_cfg2;
++ u32 fifo_cfg3;
++
++ unsigned int max_frame_len;
++ unsigned int desc_pktlen_mask;
++};
++
++struct ag71xx_mdio_platform_data {
++ u32 phy_mask;
++ u8 builtin_switch:1;
++ u8 is_ar7240:1;
++ u8 is_ar9330:1;
++ u8 is_ar934x:1;
++ unsigned long mdio_clock;
++ unsigned long ref_clock;
++
++ void (*reset)(struct mii_bus *bus);
++};
++
++#endif /* __ASM_MACH_ATH79_PLATFORM_H */
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,1202 @@
++/*
++ * Driver for the built-in ethernet switch of the Atheros AR7240 SoC
++ * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2010 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#include <linux/etherdevice.h>
++#include <linux/list.h>
++#include <linux/netdevice.h>
++#include <linux/phy.h>
++#include <linux/mii.h>
++#include <linux/bitops.h>
++#include <linux/switch.h>
++#include "ag71xx.h"
++
++#define BITM(_count) (BIT(_count) - 1)
++#define BITS(_shift, _count) (BITM(_count) << _shift)
++
++#define AR7240_REG_MASK_CTRL 0x00
++#define AR7240_MASK_CTRL_REVISION_M BITM(8)
++#define AR7240_MASK_CTRL_VERSION_M BITM(8)
++#define AR7240_MASK_CTRL_VERSION_S 8
++#define AR7240_MASK_CTRL_VERSION_AR7240 0x01
++#define AR7240_MASK_CTRL_VERSION_AR934X 0x02
++#define AR7240_MASK_CTRL_SOFT_RESET BIT(31)
++
++#define AR7240_REG_MAC_ADDR0 0x20
++#define AR7240_REG_MAC_ADDR1 0x24
++
++#define AR7240_REG_FLOOD_MASK 0x2c
++#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26)
++
++#define AR7240_REG_GLOBAL_CTRL 0x30
++#define AR7240_GLOBAL_CTRL_MTU_M BITM(11)
++#define AR9340_GLOBAL_CTRL_MTU_M BITM(14)
++
++#define AR7240_REG_VTU 0x0040
++#define AR7240_VTU_OP BITM(3)
++#define AR7240_VTU_OP_NOOP 0x0
++#define AR7240_VTU_OP_FLUSH 0x1
++#define AR7240_VTU_OP_LOAD 0x2
++#define AR7240_VTU_OP_PURGE 0x3
++#define AR7240_VTU_OP_REMOVE_PORT 0x4
++#define AR7240_VTU_ACTIVE BIT(3)
++#define AR7240_VTU_FULL BIT(4)
++#define AR7240_VTU_PORT BITS(8, 4)
++#define AR7240_VTU_PORT_S 8
++#define AR7240_VTU_VID BITS(16, 12)
++#define AR7240_VTU_VID_S 16
++#define AR7240_VTU_PRIO BITS(28, 3)
++#define AR7240_VTU_PRIO_S 28
++#define AR7240_VTU_PRIO_EN BIT(31)
++
++#define AR7240_REG_VTU_DATA 0x0044
++#define AR7240_VTUDATA_MEMBER BITS(0, 10)
++#define AR7240_VTUDATA_VALID BIT(11)
++
++#define AR7240_REG_ATU 0x50
++#define AR7240_ATU_FLUSH_ALL 0x1
++
++#define AR7240_REG_AT_CTRL 0x5c
++#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15)
++#define AR7240_AT_CTRL_AGE_EN BIT(17)
++#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18)
++#define AR7240_AT_CTRL_RESERVED BIT(19)
++#define AR7240_AT_CTRL_ARP_EN BIT(20)
++
++#define AR7240_REG_TAG_PRIORITY 0x70
++
++#define AR7240_REG_SERVICE_TAG 0x74
++#define AR7240_SERVICE_TAG_M BITM(16)
++
++#define AR7240_REG_CPU_PORT 0x78
++#define AR7240_MIRROR_PORT_S 4
++#define AR7240_CPU_PORT_EN BIT(8)
++
++#define AR7240_REG_MIB_FUNCTION0 0x80
++#define AR7240_MIB_TIMER_M BITM(16)
++#define AR7240_MIB_AT_HALF_EN BIT(16)
++#define AR7240_MIB_BUSY BIT(17)
++#define AR7240_MIB_FUNC_S 24
++#define AR7240_MIB_FUNC_M BITM(3)
++#define AR7240_MIB_FUNC_NO_OP 0x0
++#define AR7240_MIB_FUNC_FLUSH 0x1
++#define AR7240_MIB_FUNC_CAPTURE 0x3
++
++#define AR7240_REG_MDIO_CTRL 0x98
++#define AR7240_MDIO_CTRL_DATA_M BITM(16)
++#define AR7240_MDIO_CTRL_REG_ADDR_S 16
++#define AR7240_MDIO_CTRL_PHY_ADDR_S 21
++#define AR7240_MDIO_CTRL_CMD_WRITE 0
++#define AR7240_MDIO_CTRL_CMD_READ BIT(27)
++#define AR7240_MDIO_CTRL_MASTER_EN BIT(30)
++#define AR7240_MDIO_CTRL_BUSY BIT(31)
++
++#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
++
++#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00)
++#define AR7240_PORT_STATUS_SPEED_S 0
++#define AR7240_PORT_STATUS_SPEED_M BITM(2)
++#define AR7240_PORT_STATUS_SPEED_10 0
++#define AR7240_PORT_STATUS_SPEED_100 1
++#define AR7240_PORT_STATUS_SPEED_1000 2
++#define AR7240_PORT_STATUS_TXMAC BIT(2)
++#define AR7240_PORT_STATUS_RXMAC BIT(3)
++#define AR7240_PORT_STATUS_TXFLOW BIT(4)
++#define AR7240_PORT_STATUS_RXFLOW BIT(5)
++#define AR7240_PORT_STATUS_DUPLEX BIT(6)
++#define AR7240_PORT_STATUS_LINK_UP BIT(8)
++#define AR7240_PORT_STATUS_LINK_AUTO BIT(9)
++#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10)
++
++#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04)
++#define AR7240_PORT_CTRL_STATE_M BITM(3)
++#define AR7240_PORT_CTRL_STATE_DISABLED 0
++#define AR7240_PORT_CTRL_STATE_BLOCK 1
++#define AR7240_PORT_CTRL_STATE_LISTEN 2
++#define AR7240_PORT_CTRL_STATE_LEARN 3
++#define AR7240_PORT_CTRL_STATE_FORWARD 4
++#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7)
++#define AR7240_PORT_CTRL_VLAN_MODE_S 8
++#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0
++#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
++#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2
++#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
++#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10)
++#define AR7240_PORT_CTRL_HEADER BIT(11)
++#define AR7240_PORT_CTRL_MAC_LOOP BIT(12)
++#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13)
++#define AR7240_PORT_CTRL_LEARN BIT(14)
++#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15)
++#define AR7240_PORT_CTRL_MIRROR_TX BIT(16)
++#define AR7240_PORT_CTRL_MIRROR_RX BIT(17)
++
++#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08)
++
++#define AR7240_PORT_VLAN_DEFAULT_ID_S 0
++#define AR7240_PORT_VLAN_DEST_PORTS_S 16
++#define AR7240_PORT_VLAN_MODE_S 30
++#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0
++#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1
++#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2
++#define AR7240_PORT_VLAN_MODE_SECURE 3
++
++
++#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100)
++
++#define AR7240_STATS_RXBROAD 0x00
++#define AR7240_STATS_RXPAUSE 0x04
++#define AR7240_STATS_RXMULTI 0x08
++#define AR7240_STATS_RXFCSERR 0x0c
++#define AR7240_STATS_RXALIGNERR 0x10
++#define AR7240_STATS_RXRUNT 0x14
++#define AR7240_STATS_RXFRAGMENT 0x18
++#define AR7240_STATS_RX64BYTE 0x1c
++#define AR7240_STATS_RX128BYTE 0x20
++#define AR7240_STATS_RX256BYTE 0x24
++#define AR7240_STATS_RX512BYTE 0x28
++#define AR7240_STATS_RX1024BYTE 0x2c
++#define AR7240_STATS_RX1518BYTE 0x30
++#define AR7240_STATS_RXMAXBYTE 0x34
++#define AR7240_STATS_RXTOOLONG 0x38
++#define AR7240_STATS_RXGOODBYTE 0x3c
++#define AR7240_STATS_RXBADBYTE 0x44
++#define AR7240_STATS_RXOVERFLOW 0x4c
++#define AR7240_STATS_FILTERED 0x50
++#define AR7240_STATS_TXBROAD 0x54
++#define AR7240_STATS_TXPAUSE 0x58
++#define AR7240_STATS_TXMULTI 0x5c
++#define AR7240_STATS_TXUNDERRUN 0x60
++#define AR7240_STATS_TX64BYTE 0x64
++#define AR7240_STATS_TX128BYTE 0x68
++#define AR7240_STATS_TX256BYTE 0x6c
++#define AR7240_STATS_TX512BYTE 0x70
++#define AR7240_STATS_TX1024BYTE 0x74
++#define AR7240_STATS_TX1518BYTE 0x78
++#define AR7240_STATS_TXMAXBYTE 0x7c
++#define AR7240_STATS_TXOVERSIZE 0x80
++#define AR7240_STATS_TXBYTE 0x84
++#define AR7240_STATS_TXCOLLISION 0x8c
++#define AR7240_STATS_TXABORTCOL 0x90
++#define AR7240_STATS_TXMULTICOL 0x94
++#define AR7240_STATS_TXSINGLECOL 0x98
++#define AR7240_STATS_TXEXCDEFER 0x9c
++#define AR7240_STATS_TXDEFER 0xa0
++#define AR7240_STATS_TXLATECOL 0xa4
++
++#define AR7240_PORT_CPU 0
++#define AR7240_NUM_PORTS 6
++#define AR7240_NUM_PHYS 5
++
++#define AR7240_PHY_ID1 0x004d
++#define AR7240_PHY_ID2 0xd041
++
++#define AR934X_PHY_ID1 0x004d
++#define AR934X_PHY_ID2 0xd042
++
++#define AR7240_MAX_VLANS 16
++
++#define AR934X_REG_OPER_MODE0 0x04
++#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6)
++#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10)
++
++#define AR934X_REG_OPER_MODE1 0x08
++#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28)
++
++#define AR934X_REG_FLOOD_MASK 0x2c
++#define AR934X_FLOOD_MASK_MC_DP(_p) BIT(16 + (_p))
++#define AR934X_FLOOD_MASK_BC_DP(_p) BIT(25 + (_p))
++
++#define AR934X_REG_QM_CTRL 0x3c
++#define AR934X_QM_CTRL_ARP_EN BIT(15)
++
++#define AR934X_REG_AT_CTRL 0x5c
++#define AR934X_AT_CTRL_AGE_TIME BITS(0, 15)
++#define AR934X_AT_CTRL_AGE_EN BIT(17)
++#define AR934X_AT_CTRL_LEARN_CHANGE BIT(18)
++
++#define AR934X_MIB_ENABLE BIT(30)
++
++#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
++
++#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08)
++#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0
++#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12)
++#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13)
++#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14)
++#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15)
++#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16
++#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28)
++#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29
++
++#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c)
++#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16
++#define AR934X_PORT_VLAN2_8021Q_MODE_S 30
++#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0
++#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1
++#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2
++#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3
++
++#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev)
++
++struct ar7240sw_port_stat {
++ unsigned long rx_broadcast;
++ unsigned long rx_pause;
++ unsigned long rx_multicast;
++ unsigned long rx_fcs_error;
++ unsigned long rx_align_error;
++ unsigned long rx_runt;
++ unsigned long rx_fragments;
++ unsigned long rx_64byte;
++ unsigned long rx_128byte;
++ unsigned long rx_256byte;
++ unsigned long rx_512byte;
++ unsigned long rx_1024byte;
++ unsigned long rx_1518byte;
++ unsigned long rx_maxbyte;
++ unsigned long rx_toolong;
++ unsigned long rx_good_byte;
++ unsigned long rx_bad_byte;
++ unsigned long rx_overflow;
++ unsigned long filtered;
++
++ unsigned long tx_broadcast;
++ unsigned long tx_pause;
++ unsigned long tx_multicast;
++ unsigned long tx_underrun;
++ unsigned long tx_64byte;
++ unsigned long tx_128byte;
++ unsigned long tx_256byte;
++ unsigned long tx_512byte;
++ unsigned long tx_1024byte;
++ unsigned long tx_1518byte;
++ unsigned long tx_maxbyte;
++ unsigned long tx_oversize;
++ unsigned long tx_byte;
++ unsigned long tx_collision;
++ unsigned long tx_abortcol;
++ unsigned long tx_multicol;
++ unsigned long tx_singlecol;
++ unsigned long tx_excdefer;
++ unsigned long tx_defer;
++ unsigned long tx_xlatecol;
++};
++
++struct ar7240sw {
++ struct mii_bus *mii_bus;
++ struct ag71xx_switch_platform_data *swdata;
++ struct switch_dev swdev;
++ int num_ports;
++ u8 ver;
++ bool vlan;
++ u16 vlan_id[AR7240_MAX_VLANS];
++ u8 vlan_table[AR7240_MAX_VLANS];
++ u8 vlan_tagged;
++ u16 pvid[AR7240_NUM_PORTS];
++ char buf[80];
++
++ rwlock_t stats_lock;
++ struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS];
++};
++
++struct ar7240sw_hw_stat {
++ char string[ETH_GSTRING_LEN];
++ int sizeof_stat;
++ int reg;
++};
++
++static DEFINE_MUTEX(reg_mutex);
++
++static inline int sw_is_ar7240(struct ar7240sw *as)
++{
++ return as->ver == AR7240_MASK_CTRL_VERSION_AR7240;
++}
++
++static inline int sw_is_ar934x(struct ar7240sw *as)
++{
++ return as->ver == AR7240_MASK_CTRL_VERSION_AR934X;
++}
++
++static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port)
++{
++ return BIT(port);
++}
++
++static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as)
++{
++ return BIT(as->swdev.ports) - 1;
++}
++
++static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port)
++{
++ return ar7240sw_port_mask_all(as) & ~BIT(port);
++}
++
++static inline u16 mk_phy_addr(u32 reg)
++{
++ return 0x17 & ((reg >> 4) | 0x10);
++}
++
++static inline u16 mk_phy_reg(u32 reg)
++{
++ return (reg << 1) & 0x1e;
++}
++
++static inline u16 mk_high_addr(u32 reg)
++{
++ return (reg >> 7) & 0x1ff;
++}
++
++static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg)
++{
++ unsigned long flags;
++ u16 phy_addr;
++ u16 phy_reg;
++ u32 hi, lo;
++
++ reg = (reg & 0xfffffffc) >> 2;
++ phy_addr = mk_phy_addr(reg);
++ phy_reg = mk_phy_reg(reg);
++
++ local_irq_save(flags);
++ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
++ lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg);
++ hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1);
++ local_irq_restore(flags);
++
++ return (hi << 16) | lo;
++}
++
++static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val)
++{
++ unsigned long flags;
++ u16 phy_addr;
++ u16 phy_reg;
++
++ reg = (reg & 0xfffffffc) >> 2;
++ phy_addr = mk_phy_addr(reg);
++ phy_reg = mk_phy_reg(reg);
++
++ local_irq_save(flags);
++ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
++ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16));
++ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff));
++ local_irq_restore(flags);
++}
++
++static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr)
++{
++ u32 ret;
++
++ mutex_lock(&reg_mutex);
++ ret = __ar7240sw_reg_read(mii, reg_addr);
++ mutex_unlock(&reg_mutex);
++
++ return ret;
++}
++
++static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val)
++{
++ mutex_lock(&reg_mutex);
++ __ar7240sw_reg_write(mii, reg_addr, reg_val);
++ mutex_unlock(&reg_mutex);
++}
++
++static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val)
++{
++ u32 t;
++
++ mutex_lock(&reg_mutex);
++ t = __ar7240sw_reg_read(mii, reg);
++ t &= ~mask;
++ t |= val;
++ __ar7240sw_reg_write(mii, reg, t);
++ mutex_unlock(&reg_mutex);
++
++ return t;
++}
++
++static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val)
++{
++ u32 t;
++
++ mutex_lock(&reg_mutex);
++ t = __ar7240sw_reg_read(mii, reg);
++ t |= val;
++ __ar7240sw_reg_write(mii, reg, t);
++ mutex_unlock(&reg_mutex);
++}
++
++static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
++ unsigned timeout)
++{
++ int i;
++
++ for (i = 0; i < timeout; i++) {
++ u32 t;
++
++ t = __ar7240sw_reg_read(mii, reg);
++ if ((t & mask) == val)
++ return 0;
++
++ msleep(1);
++ }
++
++ return -ETIMEDOUT;
++}
++
++static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
++ unsigned timeout)
++{
++ int ret;
++
++ mutex_lock(&reg_mutex);
++ ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout);
++ mutex_unlock(&reg_mutex);
++ return ret;
++}
++
++u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
++ unsigned reg_addr)
++{
++ u32 t, val = 0xffff;
++ int err;
++
++ if (phy_addr >= AR7240_NUM_PHYS)
++ return 0xffff;
++
++ mutex_lock(&reg_mutex);
++ t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
++ (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
++ AR7240_MDIO_CTRL_MASTER_EN |
++ AR7240_MDIO_CTRL_BUSY |
++ AR7240_MDIO_CTRL_CMD_READ;
++
++ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
++ err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
++ AR7240_MDIO_CTRL_BUSY, 0, 5);
++ if (!err)
++ val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL);
++ mutex_unlock(&reg_mutex);
++
++ return val & AR7240_MDIO_CTRL_DATA_M;
++}
++
++int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
++ unsigned reg_addr, u16 reg_val)
++{
++ u32 t;
++ int ret;
++
++ if (phy_addr >= AR7240_NUM_PHYS)
++ return -EINVAL;
++
++ mutex_lock(&reg_mutex);
++ t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
++ (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
++ AR7240_MDIO_CTRL_MASTER_EN |
++ AR7240_MDIO_CTRL_BUSY |
++ AR7240_MDIO_CTRL_CMD_WRITE |
++ reg_val;
++
++ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
++ ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
++ AR7240_MDIO_CTRL_BUSY, 0, 5);
++ mutex_unlock(&reg_mutex);
++
++ return ret;
++}
++
++static int ar7240sw_capture_stats(struct ar7240sw *as)
++{
++ struct mii_bus *mii = as->mii_bus;
++ int port;
++ int ret;
++
++ write_lock(&as->stats_lock);
++
++ /* Capture the hardware statistics for all ports */
++ ar7240sw_reg_rmw(mii, AR7240_REG_MIB_FUNCTION0,
++ (AR7240_MIB_FUNC_M << AR7240_MIB_FUNC_S),
++ (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
++
++ /* Wait for the capturing to complete. */
++ ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0,
++ AR7240_MIB_BUSY, 0, 10);
++
++ if (ret)
++ goto unlock;
++
++ for (port = 0; port < AR7240_NUM_PORTS; port++) {
++ unsigned int base;
++ struct ar7240sw_port_stat *stats;
++
++ base = AR7240_REG_STATS_BASE(port);
++ stats = &as->port_stats[port];
++
++#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r)
++
++ stats->rx_good_byte += READ_STAT(RXGOODBYTE);
++ stats->tx_byte += READ_STAT(TXBYTE);
++
++#undef READ_STAT
++ }
++
++ ret = 0;
++
++unlock:
++ write_unlock(&as->stats_lock);
++ return ret;
++}
++
++static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
++{
++ ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port),
++ AR7240_PORT_CTRL_STATE_DISABLED);
++}
++
++static void ar7240sw_setup(struct ar7240sw *as)
++{
++ struct mii_bus *mii = as->mii_bus;
++
++ /* Enable CPU port, and disable mirror port */
++ ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT,
++ AR7240_CPU_PORT_EN |
++ (15 << AR7240_MIRROR_PORT_S));
++
++ /* Setup TAG priority mapping */
++ ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50);
++
++ if (sw_is_ar934x(as)) {
++ /* Enable aging, MAC replacing */
++ ar7240sw_reg_write(mii, AR934X_REG_AT_CTRL,
++ 0x2b /* 5 min age time */ |
++ AR934X_AT_CTRL_AGE_EN |
++ AR934X_AT_CTRL_LEARN_CHANGE);
++ /* Enable ARP frame acknowledge */
++ ar7240sw_reg_set(mii, AR934X_REG_QM_CTRL,
++ AR934X_QM_CTRL_ARP_EN);
++ /* Enable Broadcast/Multicast frames transmitted to the CPU */
++ ar7240sw_reg_set(mii, AR934X_REG_FLOOD_MASK,
++ AR934X_FLOOD_MASK_BC_DP(0) |
++ AR934X_FLOOD_MASK_MC_DP(0));
++
++ /* setup MTU */
++ ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
++ AR9340_GLOBAL_CTRL_MTU_M,
++ AR9340_GLOBAL_CTRL_MTU_M);
++
++ /* Enable MIB counters */
++ ar7240sw_reg_set(mii, AR7240_REG_MIB_FUNCTION0,
++ AR934X_MIB_ENABLE);
++
++ } else {
++ /* Enable ARP frame acknowledge, aging, MAC replacing */
++ ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL,
++ AR7240_AT_CTRL_RESERVED |
++ 0x2b /* 5 min age time */ |
++ AR7240_AT_CTRL_AGE_EN |
++ AR7240_AT_CTRL_ARP_EN |
++ AR7240_AT_CTRL_LEARN_CHANGE);
++ /* Enable Broadcast frames transmitted to the CPU */
++ ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK,
++ AR7240_FLOOD_MASK_BROAD_TO_CPU);
++
++ /* setup MTU */
++ ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
++ AR7240_GLOBAL_CTRL_MTU_M,
++ AR7240_GLOBAL_CTRL_MTU_M);
++ }
++
++ /* setup Service TAG */
++ ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0);
++}
++
++static int ar7240sw_reset(struct ar7240sw *as)
++{
++ struct mii_bus *mii = as->mii_bus;
++ int ret;
++ int i;
++
++ /* Set all ports to disabled state. */
++ for (i = 0; i < AR7240_NUM_PORTS; i++)
++ ar7240sw_disable_port(as, i);
++
++ /* Wait for transmit queues to drain. */
++ msleep(2);
++
++ /* Reset the switch. */
++ ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL,
++ AR7240_MASK_CTRL_SOFT_RESET);
++
++ ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL,
++ AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
++
++ /* setup PHYs */
++ for (i = 0; i < AR7240_NUM_PHYS; i++) {
++ ar7240sw_phy_write(mii, i, MII_ADVERTISE,
++ ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
++ ADVERTISE_PAUSE_ASYM);
++ ar7240sw_phy_write(mii, i, MII_BMCR,
++ BMCR_RESET | BMCR_ANENABLE);
++ }
++ msleep(1000);
++
++ ar7240sw_setup(as);
++ return ret;
++}
++
++static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask)
++{
++ struct mii_bus *mii = as->mii_bus;
++ u32 ctrl;
++ u32 vid, mode;
++
++ ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN |
++ AR7240_PORT_CTRL_SINGLE_VLAN;
++
++ if (port == AR7240_PORT_CPU) {
++ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
++ AR7240_PORT_STATUS_SPEED_1000 |
++ AR7240_PORT_STATUS_TXFLOW |
++ AR7240_PORT_STATUS_RXFLOW |
++ AR7240_PORT_STATUS_TXMAC |
++ AR7240_PORT_STATUS_RXMAC |
++ AR7240_PORT_STATUS_DUPLEX);
++ } else {
++ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
++ AR7240_PORT_STATUS_LINK_AUTO);
++ }
++
++ /* Set the default VID for this port */
++ if (as->vlan) {
++ vid = as->vlan_id[as->pvid[port]];
++ mode = AR7240_PORT_VLAN_MODE_SECURE;
++ } else {
++ vid = port;
++ mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
++ }
++
++ if (as->vlan) {
++ if (as->vlan_tagged & BIT(port))
++ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD <<
++ AR7240_PORT_CTRL_VLAN_MODE_S;
++ else
++ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP <<
++ AR7240_PORT_CTRL_VLAN_MODE_S;
++ } else {
++ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_KEEP <<
++ AR7240_PORT_CTRL_VLAN_MODE_S;
++ }
++
++ if (!portmask) {
++ if (port == AR7240_PORT_CPU)
++ portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU);
++ else
++ portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU);
++ }
++
++ /* allow the port to talk to all other ports, but exclude its
++ * own ID to prevent frames from being reflected back to the
++ * port that they came from */
++ portmask &= ar7240sw_port_mask_but(as, port);
++
++ ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl);
++ if (sw_is_ar934x(as)) {
++ u32 vlan1, vlan2;
++
++ vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S);
++ vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) |
++ (mode << AR934X_PORT_VLAN2_8021Q_MODE_S);
++ ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1);
++ ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2);
++ } else {
++ u32 vlan;
++
++ vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) |
++ (portmask << AR7240_PORT_VLAN_DEST_PORTS_S);
++
++ ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan);
++ }
++}
++
++static int ar7240_set_addr(struct ar7240sw *as, u8 *addr)
++{
++ struct mii_bus *mii = as->mii_bus;
++ u32 t;
++
++ t = (addr[4] << 8) | addr[5];
++ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t);
++
++ t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
++ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t);
++
++ return 0;
++}
++
++static int
++ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ as->vlan_id[val->port_vlan] = val->value.i;
++ return 0;
++}
++
++static int
++ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ val->value.i = as->vlan_id[val->port_vlan];
++ return 0;
++}
++
++static int
++ar7240_set_pvid(struct switch_dev *dev, int port, int vlan)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++
++ /* make sure no invalid PVIDs get set */
++
++ if (vlan >= dev->vlans)
++ return -EINVAL;
++
++ as->pvid[port] = vlan;
++ return 0;
++}
++
++static int
++ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ *vlan = as->pvid[port];
++ return 0;
++}
++
++static int
++ar7240_get_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ u8 ports = as->vlan_table[val->port_vlan];
++ int i;
++
++ val->len = 0;
++ for (i = 0; i < as->swdev.ports; i++) {
++ struct switch_port *p;
++
++ if (!(ports & (1 << i)))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++ if (as->vlan_tagged & (1 << i))
++ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
++ else
++ p->flags = 0;
++ }
++ return 0;
++}
++
++static int
++ar7240_set_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ u8 *vt = &as->vlan_table[val->port_vlan];
++ int i, j;
++
++ *vt = 0;
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++
++ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
++ as->vlan_tagged |= (1 << p->id);
++ else {
++ as->vlan_tagged &= ~(1 << p->id);
++ as->pvid[p->id] = val->port_vlan;
++
++ /* make sure that an untagged port does not
++ * appear in other vlans */
++ for (j = 0; j < AR7240_MAX_VLANS; j++) {
++ if (j == val->port_vlan)
++ continue;
++ as->vlan_table[j] &= ~(1 << p->id);
++ }
++ }
++
++ *vt |= 1 << p->id;
++ }
++ return 0;
++}
++
++static int
++ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ as->vlan = !!val->value.i;
++ return 0;
++}
++
++static int
++ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ val->value.i = as->vlan;
++ return 0;
++}
++
++static void
++ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val)
++{
++ struct mii_bus *mii = as->mii_bus;
++
++ if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5))
++ return;
++
++ if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) {
++ val &= AR7240_VTUDATA_MEMBER;
++ val |= AR7240_VTUDATA_VALID;
++ ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val);
++ }
++ op |= AR7240_VTU_ACTIVE;
++ ar7240sw_reg_write(mii, AR7240_REG_VTU, op);
++}
++
++static int
++ar7240_hw_apply(struct switch_dev *dev)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ u8 portmask[AR7240_NUM_PORTS];
++ int i, j;
++
++ /* flush all vlan translation unit entries */
++ ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0);
++
++ memset(portmask, 0, sizeof(portmask));
++ if (as->vlan) {
++ /* calculate the port destination masks and load vlans
++ * into the vlan translation unit */
++ for (j = 0; j < AR7240_MAX_VLANS; j++) {
++ u8 vp = as->vlan_table[j];
++
++ if (!vp)
++ continue;
++
++ for (i = 0; i < as->swdev.ports; i++) {
++ u8 mask = (1 << i);
++ if (vp & mask)
++ portmask[i] |= vp & ~mask;
++ }
++
++ ar7240_vtu_op(as,
++ AR7240_VTU_OP_LOAD |
++ (as->vlan_id[j] << AR7240_VTU_VID_S),
++ as->vlan_table[j]);
++ }
++ } else {
++ /* vlan disabled:
++ * isolate all ports, but connect them to the cpu port */
++ for (i = 0; i < as->swdev.ports; i++) {
++ if (i == AR7240_PORT_CPU)
++ continue;
++
++ portmask[i] = 1 << AR7240_PORT_CPU;
++ portmask[AR7240_PORT_CPU] |= (1 << i);
++ }
++ }
++
++ /* update the port destination mask registers and tag settings */
++ for (i = 0; i < as->swdev.ports; i++)
++ ar7240sw_setup_port(as, i, portmask[i]);
++
++ return 0;
++}
++
++static int
++ar7240_reset_switch(struct switch_dev *dev)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ ar7240sw_reset(as);
++ return 0;
++}
++
++static int
++ar7240_get_port_link(struct switch_dev *dev, int port,
++ struct switch_port_link *link)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++ struct mii_bus *mii = as->mii_bus;
++ u32 status;
++
++ if (port > AR7240_NUM_PORTS)
++ return -EINVAL;
++
++ status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
++ link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO);
++ if (link->aneg) {
++ link->link = !!(status & AR7240_PORT_STATUS_LINK_UP);
++ if (!link->link)
++ return 0;
++ } else {
++ link->link = true;
++ }
++
++ link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX);
++ link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW);
++ link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW);
++ switch (status & AR7240_PORT_STATUS_SPEED_M) {
++ case AR7240_PORT_STATUS_SPEED_10:
++ link->speed = SWITCH_PORT_SPEED_10;
++ break;
++ case AR7240_PORT_STATUS_SPEED_100:
++ link->speed = SWITCH_PORT_SPEED_100;
++ break;
++ case AR7240_PORT_STATUS_SPEED_1000:
++ link->speed = SWITCH_PORT_SPEED_1000;
++ break;
++ }
++
++ return 0;
++}
++
++static int
++ar7240_get_port_stats(struct switch_dev *dev, int port,
++ struct switch_port_stats *stats)
++{
++ struct ar7240sw *as = sw_to_ar7240(dev);
++
++ if (port > AR7240_NUM_PORTS)
++ return -EINVAL;
++
++ ar7240sw_capture_stats(as);
++
++ read_lock(&as->stats_lock);
++ stats->rx_bytes = as->port_stats[port].rx_good_byte;
++ stats->tx_bytes = as->port_stats[port].tx_byte;
++ read_unlock(&as->stats_lock);
++
++ return 0;
++}
++
++static struct switch_attr ar7240_globals[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "Enable VLAN mode",
++ .set = ar7240_set_vlan,
++ .get = ar7240_get_vlan,
++ .max = 1
++ },
++};
++
++static struct switch_attr ar7240_port[] = {
++};
++
++static struct switch_attr ar7240_vlan[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "vid",
++ .description = "VLAN ID",
++ .set = ar7240_set_vid,
++ .get = ar7240_get_vid,
++ .max = 4094,
++ },
++};
++
++static const struct switch_dev_ops ar7240_ops = {
++ .attr_global = {
++ .attr = ar7240_globals,
++ .n_attr = ARRAY_SIZE(ar7240_globals),
++ },
++ .attr_port = {
++ .attr = ar7240_port,
++ .n_attr = ARRAY_SIZE(ar7240_port),
++ },
++ .attr_vlan = {
++ .attr = ar7240_vlan,
++ .n_attr = ARRAY_SIZE(ar7240_vlan),
++ },
++ .get_port_pvid = ar7240_get_pvid,
++ .set_port_pvid = ar7240_set_pvid,
++ .get_vlan_ports = ar7240_get_ports,
++ .set_vlan_ports = ar7240_set_ports,
++ .apply_config = ar7240_hw_apply,
++ .reset_switch = ar7240_reset_switch,
++ .get_port_link = ar7240_get_port_link,
++ .get_port_stats = ar7240_get_port_stats,
++};
++
++static struct ar7240sw *ar7240_probe(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ struct mii_bus *mii = ag->mii_bus;
++ struct ar7240sw *as;
++ struct switch_dev *swdev;
++ u32 ctrl;
++ u16 phy_id1;
++ u16 phy_id2;
++ int i;
++
++ phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1);
++ phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2);
++ if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) &&
++ (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) {
++ pr_err("%s: unknown phy id '%04x:%04x'\n",
++ dev_name(&mii->dev), phy_id1, phy_id2);
++ return NULL;
++ }
++
++ as = kzalloc(sizeof(*as), GFP_KERNEL);
++ if (!as)
++ return NULL;
++
++ as->mii_bus = mii;
++ as->swdata = pdata->switch_data;
++
++ swdev = &as->swdev;
++
++ ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL);
++ as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) &
++ AR7240_MASK_CTRL_VERSION_M;
++
++ if (sw_is_ar7240(as)) {
++ swdev->name = "AR7240/AR9330 built-in switch";
++ swdev->ports = AR7240_NUM_PORTS - 1;
++ } else if (sw_is_ar934x(as)) {
++ swdev->name = "AR934X built-in switch";
++
++ if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) {
++ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
++ AR934X_OPER_MODE0_MAC_GMII_EN);
++ } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) {
++ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
++ AR934X_OPER_MODE0_PHY_MII_EN);
++ } else {
++ pr_err("%s: invalid PHY interface mode\n",
++ dev_name(&mii->dev));
++ goto err_free;
++ }
++
++ if (as->swdata->phy4_mii_en) {
++ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1,
++ AR934X_REG_OPER_MODE1_PHY4_MII_EN);
++ swdev->ports = AR7240_NUM_PORTS - 1;
++ } else {
++ swdev->ports = AR7240_NUM_PORTS;
++ }
++ } else {
++ pr_err("%s: unsupported chip, ctrl=%08x\n",
++ dev_name(&mii->dev), ctrl);
++ goto err_free;
++ }
++
++ swdev->cpu_port = AR7240_PORT_CPU;
++ swdev->vlans = AR7240_MAX_VLANS;
++ swdev->ops = &ar7240_ops;
++
++ if (register_switch(&as->swdev, ag->dev) < 0)
++ goto err_free;
++
++ pr_info("%s: Found an %s\n", dev_name(&mii->dev), swdev->name);
++
++ /* initialize defaults */
++ for (i = 0; i < AR7240_MAX_VLANS; i++)
++ as->vlan_id[i] = i;
++
++ as->vlan_table[0] = ar7240sw_port_mask_all(as);
++
++ return as;
++
++err_free:
++ kfree(as);
++ return NULL;
++}
++
++static void link_function(struct work_struct *work) {
++ struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work);
++ struct ar7240sw *as = ag->phy_priv;
++ unsigned long flags;
++ u8 mask;
++ int i;
++ int status = 0;
++
++ mask = ~as->swdata->phy_poll_mask;
++ for (i = 0; i < AR7240_NUM_PHYS; i++) {
++ int link;
++
++ if (!(mask & BIT(i)))
++ continue;
++
++ link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR);
++ if (link & BMSR_LSTATUS) {
++ status = 1;
++ break;
++ }
++ }
++
++ spin_lock_irqsave(&ag->lock, flags);
++ if (status != ag->link) {
++ ag->link = status;
++ ag71xx_link_adjust(ag);
++ }
++ spin_unlock_irqrestore(&ag->lock, flags);
++
++ schedule_delayed_work(&ag->link_work, HZ / 2);
++}
++
++void ag71xx_ar7240_start(struct ag71xx *ag)
++{
++ struct ar7240sw *as = ag->phy_priv;
++
++ ar7240sw_reset(as);
++
++ ag->speed = SPEED_1000;
++ ag->duplex = 1;
++
++ ar7240_set_addr(as, ag->dev->dev_addr);
++ ar7240_hw_apply(&as->swdev);
++
++ schedule_delayed_work(&ag->link_work, HZ / 10);
++}
++
++void ag71xx_ar7240_stop(struct ag71xx *ag)
++{
++ cancel_delayed_work_sync(&ag->link_work);
++}
++
++int ag71xx_ar7240_init(struct ag71xx *ag)
++{
++ struct ar7240sw *as;
++
++ as = ar7240_probe(ag);
++ if (!as)
++ return -ENODEV;
++
++ ag->phy_priv = as;
++ ar7240sw_reset(as);
++
++ rwlock_init(&as->stats_lock);
++ INIT_DELAYED_WORK(&ag->link_work, link_function);
++
++ return 0;
++}
++
++void ag71xx_ar7240_cleanup(struct ag71xx *ag)
++{
++ struct ar7240sw *as = ag->phy_priv;
++
++ if (!as)
++ return;
++
++ unregister_switch(&as->swdev);
++ kfree(as);
++ ag->phy_priv = NULL;
++}
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,44 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ * Special support for the Atheros ar8216 switch chip
++ *
++ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AR8216_PACKET_TYPE_MASK 0xf
++#define AR8216_PACKET_TYPE_NORMAL 0
++
++#define AR8216_HEADER_LEN 2
++
++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
++{
++ skb_push(skb, AR8216_HEADER_LEN);
++ skb->data[0] = 0x10;
++ skb->data[1] = 0x80;
++}
++
++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
++ int pktlen)
++{
++ u8 type;
++
++ type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
++ switch (type) {
++ case AR8216_PACKET_TYPE_NORMAL:
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ skb_pull(skb, AR8216_HEADER_LEN);
++ return 0;
++}
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,284 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/debugfs.h>
++
++#include "ag71xx.h"
++
++static struct dentry *ag71xx_debugfs_root;
++
++static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
++{
++ file->private_data = inode->i_private;
++ return 0;
++}
++
++void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
++{
++ if (status)
++ ag->debug.int_stats.total++;
++ if (status & AG71XX_INT_TX_PS)
++ ag->debug.int_stats.tx_ps++;
++ if (status & AG71XX_INT_TX_UR)
++ ag->debug.int_stats.tx_ur++;
++ if (status & AG71XX_INT_TX_BE)
++ ag->debug.int_stats.tx_be++;
++ if (status & AG71XX_INT_RX_PR)
++ ag->debug.int_stats.rx_pr++;
++ if (status & AG71XX_INT_RX_OF)
++ ag->debug.int_stats.rx_of++;
++ if (status & AG71XX_INT_RX_BE)
++ ag->debug.int_stats.rx_be++;
++}
++
++static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
++ size_t count, loff_t *ppos)
++{
++#define PR_INT_STAT(_label, _field) \
++ len += snprintf(buf + len, sizeof(buf) - len, \
++ "%20s: %10lu\n", _label, ag->debug.int_stats._field);
++
++ struct ag71xx *ag = file->private_data;
++ char buf[256];
++ unsigned int len = 0;
++
++ PR_INT_STAT("TX Packet Sent", tx_ps);
++ PR_INT_STAT("TX Underrun", tx_ur);
++ PR_INT_STAT("TX Bus Error", tx_be);
++ PR_INT_STAT("RX Packet Received", rx_pr);
++ PR_INT_STAT("RX Overflow", rx_of);
++ PR_INT_STAT("RX Bus Error", rx_be);
++ len += snprintf(buf + len, sizeof(buf) - len, "\n");
++ PR_INT_STAT("Total", total);
++
++ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
++#undef PR_INT_STAT
++}
++
++static const struct file_operations ag71xx_fops_int_stats = {
++ .open = ag71xx_debugfs_generic_open,
++ .read = read_file_int_stats,
++ .owner = THIS_MODULE
++};
++
++void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
++{
++ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
++
++ if (rx) {
++ stats->rx_count++;
++ stats->rx_packets += rx;
++ if (rx <= AG71XX_NAPI_WEIGHT)
++ stats->rx[rx]++;
++ if (rx > stats->rx_packets_max)
++ stats->rx_packets_max = rx;
++ }
++
++ if (tx) {
++ stats->tx_count++;
++ stats->tx_packets += tx;
++ if (tx <= AG71XX_NAPI_WEIGHT)
++ stats->tx[tx]++;
++ if (tx > stats->tx_packets_max)
++ stats->tx_packets_max = tx;
++ }
++}
++
++static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
++ size_t count, loff_t *ppos)
++{
++ struct ag71xx *ag = file->private_data;
++ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
++ char *buf;
++ unsigned int buflen;
++ unsigned int len = 0;
++ unsigned long rx_avg = 0;
++ unsigned long tx_avg = 0;
++ int ret;
++ int i;
++
++ buflen = 2048;
++ buf = kmalloc(buflen, GFP_KERNEL);
++ if (!buf)
++ return -ENOMEM;
++
++ if (stats->rx_count)
++ rx_avg = stats->rx_packets / stats->rx_count;
++
++ if (stats->tx_count)
++ tx_avg = stats->tx_packets / stats->tx_count;
++
++ len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n",
++ "len", "rx", "tx");
++
++ for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
++ len += snprintf(buf + len, buflen - len,
++ "%3d: %10lu %10lu\n",
++ i, stats->rx[i], stats->tx[i]);
++
++ len += snprintf(buf + len, buflen - len, "\n");
++
++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++ "sum", stats->rx_count, stats->tx_count);
++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++ "avg", rx_avg, tx_avg);
++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++ "max", stats->rx_packets_max, stats->tx_packets_max);
++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++ "pkt", stats->rx_packets, stats->tx_packets);
++
++ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
++ kfree(buf);
++
++ return ret;
++}
++
++static const struct file_operations ag71xx_fops_napi_stats = {
++ .open = ag71xx_debugfs_generic_open,
++ .read = read_file_napi_stats,
++ .owner = THIS_MODULE
++};
++
++#define DESC_PRINT_LEN 64
++
++static ssize_t read_file_ring(struct file *file, char __user *user_buf,
++ size_t count, loff_t *ppos,
++ struct ag71xx *ag,
++ struct ag71xx_ring *ring,
++ unsigned desc_reg)
++{
++ char *buf;
++ unsigned int buflen;
++ unsigned int len = 0;
++ unsigned long flags;
++ ssize_t ret;
++ int curr;
++ int dirty;
++ u32 desc_hw;
++ int i;
++
++ buflen = (ring->size * DESC_PRINT_LEN);
++ buf = kmalloc(buflen, GFP_KERNEL);
++ if (!buf)
++ return -ENOMEM;
++
++ len += snprintf(buf + len, buflen - len,
++ "Idx ... %-8s %-8s %-8s %-8s . %-10s\n",
++ "desc", "next", "data", "ctrl", "timestamp");
++
++ spin_lock_irqsave(&ag->lock, flags);
++
++ curr = (ring->curr % ring->size);
++ dirty = (ring->dirty % ring->size);
++ desc_hw = ag71xx_rr(ag, desc_reg);
++ for (i = 0; i < ring->size; i++) {
++ struct ag71xx_buf *ab = &ring->buf[i];
++ u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size;
++
++ len += snprintf(buf + len, buflen - len,
++ "%3d %c%c%c %08x %08x %08x %08x %c %10lu\n",
++ i,
++ (i == curr) ? 'C' : ' ',
++ (i == dirty) ? 'D' : ' ',
++ (desc_hw == desc_dma) ? 'H' : ' ',
++ desc_dma,
++ ab->desc->next,
++ ab->desc->data,
++ ab->desc->ctrl,
++ (ab->desc->ctrl & DESC_EMPTY) ? 'E' : '*',
++ ab->timestamp);
++ }
++
++ spin_unlock_irqrestore(&ag->lock, flags);
++
++ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
++ kfree(buf);
++
++ return ret;
++}
++
++static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf,
++ size_t count, loff_t *ppos)
++{
++ struct ag71xx *ag = file->private_data;
++
++ return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring,
++ AG71XX_REG_TX_DESC);
++}
++
++static const struct file_operations ag71xx_fops_tx_ring = {
++ .open = ag71xx_debugfs_generic_open,
++ .read = read_file_tx_ring,
++ .owner = THIS_MODULE
++};
++
++static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf,
++ size_t count, loff_t *ppos)
++{
++ struct ag71xx *ag = file->private_data;
++
++ return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring,
++ AG71XX_REG_RX_DESC);
++}
++
++static const struct file_operations ag71xx_fops_rx_ring = {
++ .open = ag71xx_debugfs_generic_open,
++ .read = read_file_rx_ring,
++ .owner = THIS_MODULE
++};
++
++void ag71xx_debugfs_exit(struct ag71xx *ag)
++{
++ debugfs_remove_recursive(ag->debug.debugfs_dir);
++}
++
++int ag71xx_debugfs_init(struct ag71xx *ag)
++{
++ struct device *dev = &ag->pdev->dev;
++
++ ag->debug.debugfs_dir = debugfs_create_dir(dev_name(dev),
++ ag71xx_debugfs_root);
++ if (!ag->debug.debugfs_dir) {
++ dev_err(dev, "unable to create debugfs directory\n");
++ return -ENOENT;
++ }
++
++ debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir,
++ ag, &ag71xx_fops_int_stats);
++ debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir,
++ ag, &ag71xx_fops_napi_stats);
++ debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir,
++ ag, &ag71xx_fops_tx_ring);
++ debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir,
++ ag, &ag71xx_fops_rx_ring);
++
++ return 0;
++}
++
++int ag71xx_debugfs_root_init(void)
++{
++ if (ag71xx_debugfs_root)
++ return -EBUSY;
++
++ ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
++ if (!ag71xx_debugfs_root)
++ return -ENOENT;
++
++ return 0;
++}
++
++void ag71xx_debugfs_root_exit(void)
++{
++ debugfs_remove(ag71xx_debugfs_root);
++ ag71xx_debugfs_root = NULL;
++}
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,124 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++static int ag71xx_ethtool_get_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct phy_device *phydev = ag->phy_dev;
++
++ if (!phydev)
++ return -ENODEV;
++
++ return phy_ethtool_gset(phydev, cmd);
++}
++
++static int ag71xx_ethtool_set_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct phy_device *phydev = ag->phy_dev;
++
++ if (!phydev)
++ return -ENODEV;
++
++ return phy_ethtool_sset(phydev, cmd);
++}
++
++static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
++ struct ethtool_drvinfo *info)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ strcpy(info->driver, ag->pdev->dev.driver->name);
++ strcpy(info->version, AG71XX_DRV_VERSION);
++ strcpy(info->bus_info, dev_name(&ag->pdev->dev));
++}
++
++static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ return ag->msg_enable;
++}
++
++static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ ag->msg_enable = msg_level;
++}
++
++static void ag71xx_ethtool_get_ringparam(struct net_device *dev,
++ struct ethtool_ringparam *er)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX;
++ er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX;
++ er->rx_mini_max_pending = 0;
++ er->rx_jumbo_max_pending = 0;
++
++ er->tx_pending = ag->tx_ring.size;
++ er->rx_pending = ag->rx_ring.size;
++ er->rx_mini_pending = 0;
++ er->rx_jumbo_pending = 0;
++}
++
++static int ag71xx_ethtool_set_ringparam(struct net_device *dev,
++ struct ethtool_ringparam *er)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ unsigned tx_size;
++ unsigned rx_size;
++ int err;
++
++ if (er->rx_mini_pending != 0||
++ er->rx_jumbo_pending != 0 ||
++ er->rx_pending == 0 ||
++ er->tx_pending == 0)
++ return -EINVAL;
++
++ tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ?
++ er->tx_pending : AG71XX_TX_RING_SIZE_MAX;
++
++ rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ?
++ er->rx_pending : AG71XX_RX_RING_SIZE_MAX;
++
++ if (netif_running(dev)) {
++ err = dev->netdev_ops->ndo_stop(dev);
++ if (err)
++ return err;
++ }
++
++ ag->tx_ring.size = tx_size;
++ ag->rx_ring.size = rx_size;
++
++ if (netif_running(dev))
++ err = dev->netdev_ops->ndo_open(dev);
++
++ return err;
++}
++
++struct ethtool_ops ag71xx_ethtool_ops = {
++ .set_settings = ag71xx_ethtool_set_settings,
++ .get_settings = ag71xx_ethtool_get_settings,
++ .get_drvinfo = ag71xx_ethtool_get_drvinfo,
++ .get_msglevel = ag71xx_ethtool_get_msglevel,
++ .set_msglevel = ag71xx_ethtool_set_msglevel,
++ .get_ringparam = ag71xx_ethtool_get_ringparam,
++ .set_ringparam = ag71xx_ethtool_set_ringparam,
++ .get_link = ethtool_op_get_link,
++};
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx.h linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx.h
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx.h 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,476 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __AG71XX_H
++#define __AG71XX_H
++
++#include <linux/kernel.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/random.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/ethtool.h>
++#include <linux/etherdevice.h>
++#include <linux/if_vlan.h>
++#include <linux/phy.h>
++#include <linux/skbuff.h>
++#include <linux/dma-mapping.h>
++#include <linux/workqueue.h>
++
++#include <linux/bitops.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ag71xx_platform.h>
++
++#define AG71XX_DRV_NAME "ag71xx"
++#define AG71XX_DRV_VERSION "0.5.35"
++
++#define AG71XX_NAPI_WEIGHT 64
++#define AG71XX_OOM_REFILL (1 + HZ/10)
++
++#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
++#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
++#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
++
++#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
++#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
++
++#define AG71XX_TX_MTU_LEN 1540
++
++#define AG71XX_TX_RING_SIZE_DEFAULT 32
++#define AG71XX_RX_RING_SIZE_DEFAULT 128
++
++#define AG71XX_TX_RING_SIZE_MAX 32
++#define AG71XX_RX_RING_SIZE_MAX 128
++
++#ifdef CONFIG_AG71XX_DEBUG
++#define DBG(fmt, args...) pr_debug(fmt, ## args)
++#else
++#define DBG(fmt, args...) do {} while (0)
++#endif
++
++#define ag71xx_assert(_cond) \
++do { \
++ if (_cond) \
++ break; \
++ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \
++ BUG(); \
++} while (0)
++
++struct ag71xx_desc {
++ u32 data;
++ u32 ctrl;
++#define DESC_EMPTY BIT(31)
++#define DESC_MORE BIT(24)
++#define DESC_PKTLEN_M 0xfff
++ u32 next;
++ u32 pad;
++} __attribute__((aligned(4)));
++
++struct ag71xx_buf {
++ union {
++ struct sk_buff *skb;
++ void *rx_buf;
++ };
++ struct ag71xx_desc *desc;
++ union {
++ dma_addr_t dma_addr;
++ unsigned long timestamp;
++ };
++ unsigned int len;
++};
++
++struct ag71xx_ring {
++ struct ag71xx_buf *buf;
++ u8 *descs_cpu;
++ dma_addr_t descs_dma;
++ unsigned int desc_size;
++ unsigned int curr;
++ unsigned int dirty;
++ unsigned int size;
++};
++
++struct ag71xx_mdio {
++ struct mii_bus *mii_bus;
++ int mii_irq[PHY_MAX_ADDR];
++ void __iomem *mdio_base;
++ struct ag71xx_mdio_platform_data *pdata;
++};
++
++struct ag71xx_int_stats {
++ unsigned long rx_pr;
++ unsigned long rx_be;
++ unsigned long rx_of;
++ unsigned long tx_ps;
++ unsigned long tx_be;
++ unsigned long tx_ur;
++ unsigned long total;
++};
++
++struct ag71xx_napi_stats {
++ unsigned long napi_calls;
++ unsigned long rx_count;
++ unsigned long rx_packets;
++ unsigned long rx_packets_max;
++ unsigned long tx_count;
++ unsigned long tx_packets;
++ unsigned long tx_packets_max;
++
++ unsigned long rx[AG71XX_NAPI_WEIGHT + 1];
++ unsigned long tx[AG71XX_NAPI_WEIGHT + 1];
++};
++
++struct ag71xx_debug {
++ struct dentry *debugfs_dir;
++
++ struct ag71xx_int_stats int_stats;
++ struct ag71xx_napi_stats napi_stats;
++};
++
++struct ag71xx {
++ void __iomem *mac_base;
++
++ spinlock_t lock;
++ struct platform_device *pdev;
++ struct net_device *dev;
++ struct napi_struct napi;
++ u32 msg_enable;
++
++ struct ag71xx_desc *stop_desc;
++ dma_addr_t stop_desc_dma;
++
++ struct ag71xx_ring rx_ring;
++ struct ag71xx_ring tx_ring;
++
++ struct mii_bus *mii_bus;
++ struct phy_device *phy_dev;
++ void *phy_priv;
++
++ unsigned int link;
++ unsigned int speed;
++ int duplex;
++
++ unsigned int max_frame_len;
++ unsigned int desc_pktlen_mask;
++ unsigned int rx_buf_size;
++
++ struct work_struct restart_work;
++ struct delayed_work link_work;
++ struct timer_list oom_timer;
++
++#ifdef CONFIG_AG71XX_DEBUG_FS
++ struct ag71xx_debug debug;
++#endif
++};
++
++extern struct ethtool_ops ag71xx_ethtool_ops;
++void ag71xx_link_adjust(struct ag71xx *ag);
++
++int ag71xx_mdio_driver_init(void) __init;
++void ag71xx_mdio_driver_exit(void);
++
++int ag71xx_phy_connect(struct ag71xx *ag);
++void ag71xx_phy_disconnect(struct ag71xx *ag);
++void ag71xx_phy_start(struct ag71xx *ag);
++void ag71xx_phy_stop(struct ag71xx *ag);
++
++static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
++{
++ return ag->pdev->dev.platform_data;
++}
++
++static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
++{
++ return (desc->ctrl & DESC_EMPTY) != 0;
++}
++
++/* Register offsets */
++#define AG71XX_REG_MAC_CFG1 0x0000
++#define AG71XX_REG_MAC_CFG2 0x0004
++#define AG71XX_REG_MAC_IPG 0x0008
++#define AG71XX_REG_MAC_HDX 0x000c
++#define AG71XX_REG_MAC_MFL 0x0010
++#define AG71XX_REG_MII_CFG 0x0020
++#define AG71XX_REG_MII_CMD 0x0024
++#define AG71XX_REG_MII_ADDR 0x0028
++#define AG71XX_REG_MII_CTRL 0x002c
++#define AG71XX_REG_MII_STATUS 0x0030
++#define AG71XX_REG_MII_IND 0x0034
++#define AG71XX_REG_MAC_IFCTL 0x0038
++#define AG71XX_REG_MAC_ADDR1 0x0040
++#define AG71XX_REG_MAC_ADDR2 0x0044
++#define AG71XX_REG_FIFO_CFG0 0x0048
++#define AG71XX_REG_FIFO_CFG1 0x004c
++#define AG71XX_REG_FIFO_CFG2 0x0050
++#define AG71XX_REG_FIFO_CFG3 0x0054
++#define AG71XX_REG_FIFO_CFG4 0x0058
++#define AG71XX_REG_FIFO_CFG5 0x005c
++#define AG71XX_REG_FIFO_RAM0 0x0060
++#define AG71XX_REG_FIFO_RAM1 0x0064
++#define AG71XX_REG_FIFO_RAM2 0x0068
++#define AG71XX_REG_FIFO_RAM3 0x006c
++#define AG71XX_REG_FIFO_RAM4 0x0070
++#define AG71XX_REG_FIFO_RAM5 0x0074
++#define AG71XX_REG_FIFO_RAM6 0x0078
++#define AG71XX_REG_FIFO_RAM7 0x007c
++
++#define AG71XX_REG_TX_CTRL 0x0180
++#define AG71XX_REG_TX_DESC 0x0184
++#define AG71XX_REG_TX_STATUS 0x0188
++#define AG71XX_REG_RX_CTRL 0x018c
++#define AG71XX_REG_RX_DESC 0x0190
++#define AG71XX_REG_RX_STATUS 0x0194
++#define AG71XX_REG_INT_ENABLE 0x0198
++#define AG71XX_REG_INT_STATUS 0x019c
++
++#define AG71XX_REG_FIFO_DEPTH 0x01a8
++#define AG71XX_REG_RX_SM 0x01b0
++#define AG71XX_REG_TX_SM 0x01b4
++
++#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
++#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
++#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
++#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
++#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
++#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
++#define MAC_CFG1_LB BIT(8) /* Loopback mode */
++#define MAC_CFG1_SR BIT(31) /* Soft Reset */
++
++#define MAC_CFG2_FDX BIT(0)
++#define MAC_CFG2_CRC_EN BIT(1)
++#define MAC_CFG2_PAD_CRC_EN BIT(2)
++#define MAC_CFG2_LEN_CHECK BIT(4)
++#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
++#define MAC_CFG2_IF_1000 BIT(9)
++#define MAC_CFG2_IF_10_100 BIT(8)
++
++#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
++#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
++#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
++#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
++#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
++#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
++ | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
++
++#define FIFO_CFG0_ENABLE_SHIFT 8
++
++#define FIFO_CFG4_DE BIT(0) /* Drop Event */
++#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
++#define FIFO_CFG4_FC BIT(2) /* False Carrier */
++#define FIFO_CFG4_CE BIT(3) /* Code Error */
++#define FIFO_CFG4_CR BIT(4) /* CRC error */
++#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
++#define FIFO_CFG4_LO BIT(6) /* Length out of range */
++#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
++#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
++#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
++#define FIFO_CFG4_DR BIT(10) /* Dribble */
++#define FIFO_CFG4_LE BIT(11) /* Long Event */
++#define FIFO_CFG4_CF BIT(12) /* Control Frame */
++#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
++#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
++#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
++#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
++#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
++
++#define FIFO_CFG5_DE BIT(0) /* Drop Event */
++#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
++#define FIFO_CFG5_FC BIT(2) /* False Carrier */
++#define FIFO_CFG5_CE BIT(3) /* Code Error */
++#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
++#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
++#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
++#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
++#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
++#define FIFO_CFG5_DR BIT(9) /* Dribble */
++#define FIFO_CFG5_CF BIT(10) /* Control Frame */
++#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
++#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
++#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
++#define FIFO_CFG5_LE BIT(14) /* Long Event */
++#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
++#define FIFO_CFG5_16 BIT(16) /* unknown */
++#define FIFO_CFG5_17 BIT(17) /* unknown */
++#define FIFO_CFG5_SF BIT(18) /* Short Frame */
++#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
++
++#define AG71XX_INT_TX_PS BIT(0)
++#define AG71XX_INT_TX_UR BIT(1)
++#define AG71XX_INT_TX_BE BIT(3)
++#define AG71XX_INT_RX_PR BIT(4)
++#define AG71XX_INT_RX_OF BIT(6)
++#define AG71XX_INT_RX_BE BIT(7)
++
++#define MAC_IFCTL_SPEED BIT(16)
++
++#define MII_CFG_CLK_DIV_4 0
++#define MII_CFG_CLK_DIV_6 2
++#define MII_CFG_CLK_DIV_8 3
++#define MII_CFG_CLK_DIV_10 4
++#define MII_CFG_CLK_DIV_14 5
++#define MII_CFG_CLK_DIV_20 6
++#define MII_CFG_CLK_DIV_28 7
++#define MII_CFG_CLK_DIV_34 8
++#define MII_CFG_CLK_DIV_42 9
++#define MII_CFG_CLK_DIV_50 10
++#define MII_CFG_CLK_DIV_58 11
++#define MII_CFG_CLK_DIV_66 12
++#define MII_CFG_CLK_DIV_74 13
++#define MII_CFG_CLK_DIV_82 14
++#define MII_CFG_CLK_DIV_98 15
++#define MII_CFG_RESET BIT(31)
++
++#define MII_CMD_WRITE 0x0
++#define MII_CMD_READ 0x1
++#define MII_ADDR_SHIFT 8
++#define MII_IND_BUSY BIT(0)
++#define MII_IND_INVALID BIT(2)
++
++#define TX_CTRL_TXE BIT(0) /* Tx Enable */
++
++#define TX_STATUS_PS BIT(0) /* Packet Sent */
++#define TX_STATUS_UR BIT(1) /* Tx Underrun */
++#define TX_STATUS_BE BIT(3) /* Bus Error */
++
++#define RX_CTRL_RXE BIT(0) /* Rx Enable */
++
++#define RX_STATUS_PR BIT(0) /* Packet Received */
++#define RX_STATUS_OF BIT(2) /* Rx Overflow */
++#define RX_STATUS_BE BIT(3) /* Bus Error */
++
++static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg)
++{
++ switch (reg) {
++ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
++ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM:
++ case AG71XX_REG_MII_CFG:
++ break;
++
++ default:
++ BUG();
++ }
++}
++
++static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
++{
++ ag71xx_check_reg_offset(ag, reg);
++
++ __raw_writel(value, ag->mac_base + reg);
++ /* flush write */
++ (void) __raw_readl(ag->mac_base + reg);
++}
++
++static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
++{
++ ag71xx_check_reg_offset(ag, reg);
++
++ return __raw_readl(ag->mac_base + reg);
++}
++
++static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
++{
++ void __iomem *r;
++
++ ag71xx_check_reg_offset(ag, reg);
++
++ r = ag->mac_base + reg;
++ __raw_writel(__raw_readl(r) | mask, r);
++ /* flush write */
++ (void)__raw_readl(r);
++}
++
++static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
++{
++ void __iomem *r;
++
++ ag71xx_check_reg_offset(ag, reg);
++
++ r = ag->mac_base + reg;
++ __raw_writel(__raw_readl(r) & ~mask, r);
++ /* flush write */
++ (void) __raw_readl(r);
++}
++
++static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
++{
++ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
++}
++
++static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
++{
++ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
++}
++
++#ifdef CONFIG_AG71XX_AR8216_SUPPORT
++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
++ int pktlen);
++static inline int ag71xx_has_ar8216(struct ag71xx *ag)
++{
++ return ag71xx_get_pdata(ag)->has_ar8216;
++}
++#else
++static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
++ struct sk_buff *skb)
++{
++}
++
++static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
++ struct sk_buff *skb,
++ int pktlen)
++{
++ return 0;
++}
++static inline int ag71xx_has_ar8216(struct ag71xx *ag)
++{
++ return 0;
++}
++#endif
++
++#ifdef CONFIG_AG71XX_DEBUG_FS
++int ag71xx_debugfs_root_init(void);
++void ag71xx_debugfs_root_exit(void);
++int ag71xx_debugfs_init(struct ag71xx *ag);
++void ag71xx_debugfs_exit(struct ag71xx *ag);
++void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
++void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
++#else
++static inline int ag71xx_debugfs_root_init(void) { return 0; }
++static inline void ag71xx_debugfs_root_exit(void) {}
++static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
++static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
++static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
++ u32 status) {}
++static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
++ int rx, int tx) {}
++#endif /* CONFIG_AG71XX_DEBUG_FS */
++
++void ag71xx_ar7240_start(struct ag71xx *ag);
++void ag71xx_ar7240_stop(struct ag71xx *ag);
++int ag71xx_ar7240_init(struct ag71xx *ag);
++void ag71xx_ar7240_cleanup(struct ag71xx *ag);
++
++int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg);
++void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val);
++
++u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
++ unsigned reg_addr);
++int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
++ unsigned reg_addr, u16 reg_val);
++
++#endif /* _AG71XX_H */
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c 2015-09-13 19:46:40.088280428 +0200
+@@ -0,0 +1,1324 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AG71XX_DEFAULT_MSG_ENABLE \
++ (NETIF_MSG_DRV \
++ | NETIF_MSG_PROBE \
++ | NETIF_MSG_LINK \
++ | NETIF_MSG_TIMER \
++ | NETIF_MSG_IFDOWN \
++ | NETIF_MSG_IFUP \
++ | NETIF_MSG_RX_ERR \
++ | NETIF_MSG_TX_ERR)
++
++static int ag71xx_msg_level = -1;
++
++module_param_named(msg_level, ag71xx_msg_level, int, 0);
++MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
++
++#define ETH_SWITCH_HEADER_LEN 2
++
++static inline unsigned int ag71xx_max_frame_len(unsigned int mtu)
++{
++ return ETH_SWITCH_HEADER_LEN + ETH_HLEN + VLAN_HLEN + mtu + ETH_FCS_LEN;
++}
++
++static void ag71xx_dump_dma_regs(struct ag71xx *ag)
++{
++ DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
++ ag71xx_rr(ag, AG71XX_REG_TX_DESC),
++ ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
++
++ DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
++ ag71xx_rr(ag, AG71XX_REG_RX_DESC),
++ ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
++}
++
++static void ag71xx_dump_regs(struct ag71xx *ag)
++{
++ DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
++ ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
++ ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
++ ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
++ DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
++ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
++ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
++ DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
++ DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
++}
++
++static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
++{
++ DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
++ ag->dev->name, label, intr,
++ (intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
++ (intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
++ (intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
++ (intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
++ (intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
++ (intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
++}
++
++static void ag71xx_ring_free(struct ag71xx_ring *ring)
++{
++ kfree(ring->buf);
++
++ if (ring->descs_cpu)
++ dma_free_coherent(NULL, ring->size * ring->desc_size,
++ ring->descs_cpu, ring->descs_dma);
++}
++
++static int ag71xx_ring_alloc(struct ag71xx_ring *ring)
++{
++ int err;
++ int i;
++
++ ring->desc_size = sizeof(struct ag71xx_desc);
++ if (ring->desc_size % cache_line_size()) {
++ DBG("ag71xx: ring %p, desc size %u rounded to %u\n",
++ ring, ring->desc_size,
++ roundup(ring->desc_size, cache_line_size()));
++ ring->desc_size = roundup(ring->desc_size, cache_line_size());
++ }
++
++ ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size,
++ &ring->descs_dma, GFP_ATOMIC);
++ if (!ring->descs_cpu) {
++ err = -ENOMEM;
++ goto err;
++ }
++
++
++ ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL);
++ if (!ring->buf) {
++ err = -ENOMEM;
++ goto err;
++ }
++
++ for (i = 0; i < ring->size; i++) {
++ int idx = i * ring->desc_size;
++ ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[idx];
++ DBG("ag71xx: ring %p, desc %d at %p\n",
++ ring, i, ring->buf[i].desc);
++ }
++
++ return 0;
++
++err:
++ return err;
++}
++
++static void ag71xx_ring_tx_clean(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ struct net_device *dev = ag->dev;
++ u32 bytes_compl = 0, pkts_compl = 0;
++
++ while (ring->curr != ring->dirty) {
++ u32 i = ring->dirty % ring->size;
++
++ if (!ag71xx_desc_empty(ring->buf[i].desc)) {
++ ring->buf[i].desc->ctrl = 0;
++ dev->stats.tx_errors++;
++ }
++
++ if (ring->buf[i].skb) {
++ bytes_compl += ring->buf[i].len;
++ pkts_compl++;
++ dev_kfree_skb_any(ring->buf[i].skb);
++ }
++ ring->buf[i].skb = NULL;
++ ring->dirty++;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++ netdev_completed_queue(dev, pkts_compl, bytes_compl);
++}
++
++static void ag71xx_ring_tx_init(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ int i;
++
++ for (i = 0; i < ring->size; i++) {
++ ring->buf[i].desc->next = (u32) (ring->descs_dma +
++ ring->desc_size * ((i + 1) % ring->size));
++
++ ring->buf[i].desc->ctrl = DESC_EMPTY;
++ ring->buf[i].skb = NULL;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++ ring->curr = 0;
++ ring->dirty = 0;
++ netdev_reset_queue(ag->dev);
++}
++
++static void ag71xx_ring_rx_clean(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ int i;
++
++ if (!ring->buf)
++ return;
++
++ for (i = 0; i < ring->size; i++)
++ if (ring->buf[i].rx_buf) {
++ dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr,
++ ag->rx_buf_size, DMA_FROM_DEVICE);
++ kfree(ring->buf[i].rx_buf);
++ }
++}
++
++static int ag71xx_buffer_offset(struct ag71xx *ag)
++{
++ int offset = NET_SKB_PAD;
++
++ /*
++ * On AR71xx/AR91xx packets must be 4-byte aligned.
++ *
++ * When using builtin AR8216 support, hardware adds a 2-byte header,
++ * so we don't need any extra alignment in that case.
++ */
++ if (!ag71xx_get_pdata(ag)->is_ar724x || ag71xx_has_ar8216(ag))
++ return offset;
++
++ return offset + NET_IP_ALIGN;
++}
++
++static bool ag71xx_fill_rx_buf(struct ag71xx *ag, struct ag71xx_buf *buf,
++ int offset)
++{
++ void *data;
++
++ data = kmalloc(ag->rx_buf_size +
++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)),
++ GFP_ATOMIC);
++ if (!data)
++ return false;
++
++ buf->rx_buf = data;
++ buf->dma_addr = dma_map_single(&ag->dev->dev, data, ag->rx_buf_size,
++ DMA_FROM_DEVICE);
++ buf->desc->data = (u32) buf->dma_addr + offset;
++ return true;
++}
++
++static int ag71xx_ring_rx_init(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ unsigned int i;
++ int ret;
++ int offset = ag71xx_buffer_offset(ag);
++
++ ret = 0;
++ for (i = 0; i < ring->size; i++) {
++ ring->buf[i].desc->next = (u32) (ring->descs_dma +
++ ring->desc_size * ((i + 1) % ring->size));
++
++ DBG("ag71xx: RX desc at %p, next is %08x\n",
++ ring->buf[i].desc,
++ ring->buf[i].desc->next);
++ }
++
++ for (i = 0; i < ring->size; i++) {
++ if (!ag71xx_fill_rx_buf(ag, &ring->buf[i], offset)) {
++ ret = -ENOMEM;
++ break;
++ }
++
++ ring->buf[i].desc->ctrl = DESC_EMPTY;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++ ring->curr = 0;
++ ring->dirty = 0;
++
++ return ret;
++}
++
++static int ag71xx_ring_rx_refill(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ unsigned int count;
++ int offset = ag71xx_buffer_offset(ag);
++
++ count = 0;
++ for (; ring->curr - ring->dirty > 0; ring->dirty++) {
++ unsigned int i;
++
++ i = ring->dirty % ring->size;
++
++ if (!ring->buf[i].rx_buf &&
++ !ag71xx_fill_rx_buf(ag, &ring->buf[i], offset))
++ break;
++
++ ring->buf[i].desc->ctrl = DESC_EMPTY;
++ count++;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++ DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
++
++ return count;
++}
++
++static int ag71xx_rings_init(struct ag71xx *ag)
++{
++ int ret;
++
++ ret = ag71xx_ring_alloc(&ag->tx_ring);
++ if (ret)
++ return ret;
++
++ ag71xx_ring_tx_init(ag);
++
++ ret = ag71xx_ring_alloc(&ag->rx_ring);
++ if (ret)
++ return ret;
++
++ ret = ag71xx_ring_rx_init(ag);
++ return ret;
++}
++
++static void ag71xx_rings_cleanup(struct ag71xx *ag)
++{
++ ag71xx_ring_rx_clean(ag);
++ ag71xx_ring_free(&ag->rx_ring);
++
++ ag71xx_ring_tx_clean(ag);
++ netdev_reset_queue(ag->dev);
++ ag71xx_ring_free(&ag->tx_ring);
++}
++
++static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
++{
++ switch (ag->speed) {
++ case SPEED_1000:
++ return "1000";
++ case SPEED_100:
++ return "100";
++ case SPEED_10:
++ return "10";
++ }
++
++ return "?";
++}
++
++static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
++{
++ u32 t;
++
++ t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
++ | (((u32) mac[3]) << 8) | ((u32) mac[2]);
++
++ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
++
++ t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
++ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
++}
++
++static void ag71xx_dma_reset(struct ag71xx *ag)
++{
++ u32 val;
++ int i;
++
++ ag71xx_dump_dma_regs(ag);
++
++ /* stop RX and TX */
++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
++
++ /*
++ * give the hardware some time to really stop all rx/tx activity
++ * clearing the descriptors too early causes random memory corruption
++ */
++ mdelay(1);
++
++ /* clear descriptor addresses */
++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma);
++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma);
++
++ /* clear pending RX/TX interrupts */
++ for (i = 0; i < 256; i++) {
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
++ }
++
++ /* clear pending errors */
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
++
++ val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
++ if (val)
++ pr_alert("%s: unable to clear DMA Rx status: %08x\n",
++ ag->dev->name, val);
++
++ val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
++
++ /* mask out reserved bits */
++ val &= ~0xff000000;
++
++ if (val)
++ pr_alert("%s: unable to clear DMA Tx status: %08x\n",
++ ag->dev->name, val);
++
++ ag71xx_dump_dma_regs(ag);
++}
++
++#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \
++ MAC_CFG1_SRX | MAC_CFG1_STX)
++
++#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
++
++#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
++ FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
++ FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
++ FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
++ FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
++ FIFO_CFG4_VT)
++
++#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
++ FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
++ FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
++ FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
++ FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
++ FIFO_CFG5_17 | FIFO_CFG5_SF)
++
++static void ag71xx_hw_stop(struct ag71xx *ag)
++{
++ /* disable all interrupts and stop the rx/tx engine */
++ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
++}
++
++static void ag71xx_hw_setup(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ /* setup MAC configuration registers */
++ ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT);
++
++ ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
++ MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
++
++ /* setup max frame length to zero */
++ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0);
++
++ /* setup FIFO configuration registers */
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
++ if (pdata->is_ar724x) {
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2);
++ } else {
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
++ }
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
++}
++
++static void ag71xx_hw_init(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ u32 reset_mask = pdata->reset_bit;
++
++ ag71xx_hw_stop(ag);
++
++ if (pdata->is_ar724x) {
++ u32 reset_phy = reset_mask;
++
++ reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY;
++ reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY);
++
++ ath79_device_reset_set(reset_phy);
++ mdelay(50);
++ ath79_device_reset_clear(reset_phy);
++ mdelay(200);
++ }
++
++ ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
++ udelay(20);
++
++ ath79_device_reset_set(reset_mask);
++ mdelay(100);
++ ath79_device_reset_clear(reset_mask);
++ mdelay(200);
++
++ ag71xx_hw_setup(ag);
++
++ ag71xx_dma_reset(ag);
++}
++
++static void ag71xx_fast_reset(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ struct net_device *dev = ag->dev;
++ u32 reset_mask = pdata->reset_bit;
++ u32 rx_ds, tx_ds;
++ u32 mii_reg;
++
++ reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC;
++
++ mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG);
++ rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC);
++ tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC);
++
++ ath79_device_reset_set(reset_mask);
++ udelay(10);
++ ath79_device_reset_clear(reset_mask);
++ udelay(10);
++
++ ag71xx_dma_reset(ag);
++ ag71xx_hw_setup(ag);
++
++ /* setup max frame length */
++ ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
++ ag71xx_max_frame_len(ag->dev->mtu));
++
++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds);
++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds);
++ ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg);
++
++ ag71xx_hw_set_macaddr(ag, dev->dev_addr);
++}
++
++static void ag71xx_hw_start(struct ag71xx *ag)
++{
++ /* start RX engine */
++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
++
++ /* enable interrupts */
++ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
++}
++
++void ag71xx_link_adjust(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ u32 cfg2;
++ u32 ifctl;
++ u32 fifo5;
++
++ if (!ag->link) {
++ ag71xx_hw_stop(ag);
++ netif_carrier_off(ag->dev);
++ if (netif_msg_link(ag))
++ pr_info("%s: link down\n", ag->dev->name);
++ return;
++ }
++
++ if (pdata->is_ar724x)
++ ag71xx_fast_reset(ag);
++
++ cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
++ cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
++ cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
++
++ ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
++ ifctl &= ~(MAC_IFCTL_SPEED);
++
++ fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
++ fifo5 &= ~FIFO_CFG5_BM;
++
++ switch (ag->speed) {
++ case SPEED_1000:
++ cfg2 |= MAC_CFG2_IF_1000;
++ fifo5 |= FIFO_CFG5_BM;
++ break;
++ case SPEED_100:
++ cfg2 |= MAC_CFG2_IF_10_100;
++ ifctl |= MAC_IFCTL_SPEED;
++ break;
++ case SPEED_10:
++ cfg2 |= MAC_CFG2_IF_10_100;
++ break;
++ default:
++ BUG();
++ return;
++ }
++
++ if (pdata->is_ar91xx)
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff);
++ else if (pdata->is_ar724x)
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3);
++ else
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
++
++ if (pdata->set_speed)
++ pdata->set_speed(ag->speed);
++
++ ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
++ ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
++ ag71xx_hw_start(ag);
++
++ netif_carrier_on(ag->dev);
++ if (netif_msg_link(ag))
++ pr_info("%s: link up (%sMbps/%s duplex)\n",
++ ag->dev->name,
++ ag71xx_speed_str(ag),
++ (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
++
++ DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
++
++ DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
++
++ DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
++ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL));
++}
++
++static int ag71xx_open(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ unsigned int max_frame_len;
++ int ret;
++
++ max_frame_len = ag71xx_max_frame_len(dev->mtu);
++ ag->rx_buf_size = max_frame_len + NET_SKB_PAD + NET_IP_ALIGN;
++
++ /* setup max frame length */
++ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len);
++
++ ret = ag71xx_rings_init(ag);
++ if (ret)
++ goto err;
++
++ napi_enable(&ag->napi);
++
++ netif_carrier_off(dev);
++ ag71xx_phy_start(ag);
++
++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
++
++ ag71xx_hw_set_macaddr(ag, dev->dev_addr);
++
++ netif_start_queue(dev);
++
++ return 0;
++
++err:
++ ag71xx_rings_cleanup(ag);
++ return ret;
++}
++
++static int ag71xx_stop(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ unsigned long flags;
++
++ netif_carrier_off(dev);
++ ag71xx_phy_stop(ag);
++
++ spin_lock_irqsave(&ag->lock, flags);
++
++ netif_stop_queue(dev);
++
++ ag71xx_hw_stop(ag);
++ ag71xx_dma_reset(ag);
++
++ napi_disable(&ag->napi);
++ del_timer_sync(&ag->oom_timer);
++
++ spin_unlock_irqrestore(&ag->lock, flags);
++
++ ag71xx_rings_cleanup(ag);
++
++ return 0;
++}
++
++static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ struct ag71xx_desc *desc;
++ dma_addr_t dma_addr;
++ int i;
++
++ i = ring->curr % ring->size;
++ desc = ring->buf[i].desc;
++
++ if (!ag71xx_desc_empty(desc))
++ goto err_drop;
++
++ if (ag71xx_has_ar8216(ag))
++ ag71xx_add_ar8216_header(ag, skb);
++
++ if (skb->len <= 0) {
++ DBG("%s: packet len is too small\n", ag->dev->name);
++ goto err_drop;
++ }
++
++ dma_addr = dma_map_single(&dev->dev, skb->data, skb->len,
++ DMA_TO_DEVICE);
++
++ netdev_sent_queue(dev, skb->len);
++ ring->buf[i].len = skb->len;
++ ring->buf[i].skb = skb;
++ ring->buf[i].timestamp = jiffies;
++
++ /* setup descriptor fields */
++ desc->data = (u32) dma_addr;
++ desc->ctrl = skb->len & ag->desc_pktlen_mask;
++
++ /* flush descriptor */
++ wmb();
++
++ ring->curr++;
++ if (ring->curr == (ring->dirty + ring->size)) {
++ DBG("%s: tx queue full\n", ag->dev->name);
++ netif_stop_queue(dev);
++ }
++
++ DBG("%s: packet injected into TX queue\n", ag->dev->name);
++
++ /* enable TX engine */
++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
++
++ return NETDEV_TX_OK;
++
++err_drop:
++ dev->stats.tx_dropped++;
++
++ dev_kfree_skb(skb);
++ return NETDEV_TX_OK;
++}
++
++static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ int ret;
++
++ switch (cmd) {
++ case SIOCETHTOOL:
++ if (ag->phy_dev == NULL)
++ break;
++
++ spin_lock_irq(&ag->lock);
++ ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
++ spin_unlock_irq(&ag->lock);
++ return ret;
++
++ case SIOCSIFHWADDR:
++ if (copy_from_user
++ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGIFHWADDR:
++ if (copy_to_user
++ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ if (ag->phy_dev == NULL)
++ break;
++
++ return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
++
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static void ag71xx_oom_timer_handler(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ag71xx *ag = netdev_priv(dev);
++
++ napi_schedule(&ag->napi);
++}
++
++static void ag71xx_tx_timeout(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ if (netif_msg_tx_err(ag))
++ pr_info("%s: tx timeout\n", ag->dev->name);
++
++ schedule_work(&ag->restart_work);
++}
++
++static void ag71xx_restart_work_func(struct work_struct *work)
++{
++ struct ag71xx *ag = container_of(work, struct ag71xx, restart_work);
++
++ if (ag71xx_get_pdata(ag)->is_ar724x) {
++ ag->link = 0;
++ ag71xx_link_adjust(ag);
++ return;
++ }
++
++ ag71xx_stop(ag->dev);
++ ag71xx_open(ag->dev);
++}
++
++static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp)
++{
++ u32 rx_sm, tx_sm, rx_fd;
++
++ if (likely(time_before(jiffies, timestamp + HZ/10)))
++ return false;
++
++ if (!netif_carrier_ok(ag->dev))
++ return false;
++
++ rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM);
++ if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6)
++ return true;
++
++ tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM);
++ rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH);
++ if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) &&
++ ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0)
++ return true;
++
++ return false;
++}
++
++static int ag71xx_tx_packets(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ int sent = 0;
++ int bytes_compl = 0;
++
++ DBG("%s: processing TX ring\n", ag->dev->name);
++
++ while (ring->dirty != ring->curr) {
++ unsigned int i = ring->dirty % ring->size;
++ struct ag71xx_desc *desc = ring->buf[i].desc;
++ struct sk_buff *skb = ring->buf[i].skb;
++ int len = ring->buf[i].len;
++
++ if (!ag71xx_desc_empty(desc)) {
++ if (pdata->is_ar7240 &&
++ ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp))
++ schedule_work(&ag->restart_work);
++ break;
++ }
++
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
++
++ bytes_compl += len;
++ ag->dev->stats.tx_bytes += len;
++ ag->dev->stats.tx_packets++;
++
++ dev_kfree_skb_any(skb);
++ ring->buf[i].skb = NULL;
++
++ ring->dirty++;
++ sent++;
++ }
++
++ DBG("%s: %d packets sent out\n", ag->dev->name, sent);
++
++ if (!sent)
++ return 0;
++
++ netdev_completed_queue(ag->dev, sent, bytes_compl);
++ if ((ring->curr - ring->dirty) < (ring->size * 3) / 4)
++ netif_wake_queue(ag->dev);
++
++ return sent;
++}
++
++static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
++{
++ struct net_device *dev = ag->dev;
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ int offset = ag71xx_buffer_offset(ag);
++ unsigned int pktlen_mask = ag->desc_pktlen_mask;
++ int done = 0;
++
++ DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
++ dev->name, limit, ring->curr, ring->dirty);
++
++ while (done < limit) {
++ unsigned int i = ring->curr % ring->size;
++ struct ag71xx_desc *desc = ring->buf[i].desc;
++ struct sk_buff *skb;
++ int pktlen;
++ int err = 0;
++
++ if (ag71xx_desc_empty(desc))
++ break;
++
++ if ((ring->dirty + ring->size) == ring->curr) {
++ ag71xx_assert(0);
++ break;
++ }
++
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
++
++ pktlen = desc->ctrl & pktlen_mask;
++ pktlen -= ETH_FCS_LEN;
++
++ dma_unmap_single(&dev->dev, ring->buf[i].dma_addr,
++ ag->rx_buf_size, DMA_FROM_DEVICE);
++
++ dev->stats.rx_packets++;
++ dev->stats.rx_bytes += pktlen;
++
++ skb = build_skb(ring->buf[i].rx_buf, 0);
++ if (!skb) {
++ kfree(ring->buf[i].rx_buf);
++ goto next;
++ }
++
++ skb_reserve(skb, offset);
++ skb_put(skb, pktlen);
++
++ if (ag71xx_has_ar8216(ag))
++ err = ag71xx_remove_ar8216_header(ag, skb, pktlen);
++
++ if (err) {
++ dev->stats.rx_dropped++;
++ kfree_skb(skb);
++ } else {
++ skb->dev = dev;
++ skb->ip_summed = CHECKSUM_NONE;
++ skb->protocol = eth_type_trans(skb, dev);
++ netif_receive_skb(skb);
++ }
++
++next:
++ ring->buf[i].rx_buf = NULL;
++ done++;
++
++ ring->curr++;
++ }
++
++ ag71xx_ring_rx_refill(ag);
++
++ DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
++ dev->name, ring->curr, ring->dirty, done);
++
++ return done;
++}
++
++static int ag71xx_poll(struct napi_struct *napi, int limit)
++{
++ struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ struct net_device *dev = ag->dev;
++ struct ag71xx_ring *rx_ring;
++ unsigned long flags;
++ u32 status;
++ int tx_done;
++ int rx_done;
++
++ pdata->ddr_flush();
++ tx_done = ag71xx_tx_packets(ag);
++
++ DBG("%s: processing RX ring\n", dev->name);
++ rx_done = ag71xx_rx_packets(ag, limit);
++
++ ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
++
++ rx_ring = &ag->rx_ring;
++ if (rx_ring->buf[rx_ring->dirty % rx_ring->size].rx_buf == NULL)
++ goto oom;
++
++ status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
++ if (unlikely(status & RX_STATUS_OF)) {
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
++ dev->stats.rx_fifo_errors++;
++
++ /* restart RX */
++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
++ }
++
++ if (rx_done < limit) {
++ if (status & RX_STATUS_PR)
++ goto more;
++
++ status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
++ if (status & TX_STATUS_PS)
++ goto more;
++
++ DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
++ dev->name, rx_done, tx_done, limit);
++
++ napi_complete(napi);
++
++ /* enable interrupts */
++ spin_lock_irqsave(&ag->lock, flags);
++ ag71xx_int_enable(ag, AG71XX_INT_POLL);
++ spin_unlock_irqrestore(&ag->lock, flags);
++ return rx_done;
++ }
++
++more:
++ DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
++ dev->name, rx_done, tx_done, limit);
++ return rx_done;
++
++oom:
++ if (netif_msg_rx_err(ag))
++ pr_info("%s: out of memory\n", dev->name);
++
++ mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
++ napi_complete(napi);
++ return 0;
++}
++
++static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
++{
++ struct net_device *dev = dev_id;
++ struct ag71xx *ag = netdev_priv(dev);
++ u32 status;
++
++ status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
++ ag71xx_dump_intr(ag, "raw", status);
++
++ if (unlikely(!status))
++ return IRQ_NONE;
++
++ if (unlikely(status & AG71XX_INT_ERR)) {
++ if (status & AG71XX_INT_TX_BE) {
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
++ dev_err(&dev->dev, "TX BUS error\n");
++ }
++ if (status & AG71XX_INT_RX_BE) {
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
++ dev_err(&dev->dev, "RX BUS error\n");
++ }
++ }
++
++ if (likely(status & AG71XX_INT_POLL)) {
++ ag71xx_int_disable(ag, AG71XX_INT_POLL);
++ DBG("%s: enable polling mode\n", dev->name);
++ napi_schedule(&ag->napi);
++ }
++
++ ag71xx_debugfs_update_int_stats(ag, status);
++
++ return IRQ_HANDLED;
++}
++
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling 'interrupt' - used by things like netconsole to send skbs
++ * without having to re-enable interrupts. It's not called while
++ * the interrupt routine is executing.
++ */
++static void ag71xx_netpoll(struct net_device *dev)
++{
++ disable_irq(dev->irq);
++ ag71xx_interrupt(dev->irq, dev);
++ enable_irq(dev->irq);
++}
++#endif
++
++static int ag71xx_change_mtu(struct net_device *dev, int new_mtu)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ unsigned int max_frame_len;
++
++ max_frame_len = ag71xx_max_frame_len(new_mtu);
++ if (new_mtu < 68 || max_frame_len > ag->max_frame_len)
++ return -EINVAL;
++
++ if (netif_running(dev))
++ return -EBUSY;
++
++ dev->mtu = new_mtu;
++ return 0;
++}
++
++static const struct net_device_ops ag71xx_netdev_ops = {
++ .ndo_open = ag71xx_open,
++ .ndo_stop = ag71xx_stop,
++ .ndo_start_xmit = ag71xx_hard_start_xmit,
++ .ndo_do_ioctl = ag71xx_do_ioctl,
++ .ndo_tx_timeout = ag71xx_tx_timeout,
++ .ndo_change_mtu = ag71xx_change_mtu,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_validate_addr = eth_validate_addr,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ .ndo_poll_controller = ag71xx_netpoll,
++#endif
++};
++
++static const char *ag71xx_get_phy_if_mode_name(phy_interface_t mode)
++{
++ switch (mode) {
++ case PHY_INTERFACE_MODE_MII:
++ return "MII";
++ case PHY_INTERFACE_MODE_GMII:
++ return "GMII";
++ case PHY_INTERFACE_MODE_RMII:
++ return "RMII";
++ case PHY_INTERFACE_MODE_RGMII:
++ return "RGMII";
++ case PHY_INTERFACE_MODE_SGMII:
++ return "SGMII";
++ default:
++ break;
++ }
++
++ return "unknown";
++}
++
++
++static int ag71xx_probe(struct platform_device *pdev)
++{
++ struct net_device *dev;
++ struct resource *res;
++ struct ag71xx *ag;
++ struct ag71xx_platform_data *pdata;
++ int err;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata) {
++ dev_err(&pdev->dev, "no platform data specified\n");
++ err = -ENXIO;
++ goto err_out;
++ }
++
++ if (pdata->mii_bus_dev == NULL && pdata->phy_mask) {
++ dev_err(&pdev->dev, "no MII bus device specified\n");
++ err = -EINVAL;
++ goto err_out;
++ }
++
++ dev = alloc_etherdev(sizeof(*ag));
++ if (!dev) {
++ dev_err(&pdev->dev, "alloc_etherdev failed\n");
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ if (!pdata->max_frame_len || !pdata->desc_pktlen_mask)
++ return -EINVAL;
++
++ SET_NETDEV_DEV(dev, &pdev->dev);
++
++ ag = netdev_priv(dev);
++ ag->pdev = pdev;
++ ag->dev = dev;
++ ag->msg_enable = netif_msg_init(ag71xx_msg_level,
++ AG71XX_DEFAULT_MSG_ENABLE);
++ spin_lock_init(&ag->lock);
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
++ if (!res) {
++ dev_err(&pdev->dev, "no mac_base resource found\n");
++ err = -ENXIO;
++ goto err_out;
++ }
++
++ ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1);
++ if (!ag->mac_base) {
++ dev_err(&pdev->dev, "unable to ioremap mac_base\n");
++ err = -ENOMEM;
++ goto err_free_dev;
++ }
++
++ dev->irq = platform_get_irq(pdev, 0);
++ err = request_irq(dev->irq, ag71xx_interrupt, 0x0,
++ dev->name, dev);
++ if (err) {
++ dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
++ goto err_unmap_base;
++ }
++
++ dev->base_addr = (unsigned long)ag->mac_base;
++ dev->netdev_ops = &ag71xx_netdev_ops;
++ dev->ethtool_ops = &ag71xx_ethtool_ops;
++
++ INIT_WORK(&ag->restart_work, ag71xx_restart_work_func);
++
++ init_timer(&ag->oom_timer);
++ ag->oom_timer.data = (unsigned long) dev;
++ ag->oom_timer.function = ag71xx_oom_timer_handler;
++
++ ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT;
++ ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT;
++
++ ag->max_frame_len = pdata->max_frame_len;
++ ag->desc_pktlen_mask = pdata->desc_pktlen_mask;
++
++ ag->stop_desc = dma_alloc_coherent(NULL,
++ sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL);
++
++ if (!ag->stop_desc)
++ goto err_free_irq;
++
++ ag->stop_desc->data = 0;
++ ag->stop_desc->ctrl = 0;
++ ag->stop_desc->next = (u32) ag->stop_desc_dma;
++
++ memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
++
++ netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
++
++ ag71xx_dump_regs(ag);
++
++ ag71xx_hw_init(ag);
++
++ ag71xx_dump_regs(ag);
++
++ err = ag71xx_phy_connect(ag);
++ if (err)
++ goto err_free_desc;
++
++ err = ag71xx_debugfs_init(ag);
++ if (err)
++ goto err_phy_disconnect;
++
++ platform_set_drvdata(pdev, dev);
++
++ err = register_netdev(dev);
++ if (err) {
++ dev_err(&pdev->dev, "unable to register net device\n");
++ goto err_debugfs_exit;
++ }
++
++ pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d, mode:%s\n",
++ dev->name, dev->base_addr, dev->irq,
++ ag71xx_get_phy_if_mode_name(pdata->phy_if_mode));
++
++ return 0;
++
++err_debugfs_exit:
++ ag71xx_debugfs_exit(ag);
++err_phy_disconnect:
++ ag71xx_phy_disconnect(ag);
++err_free_desc:
++ dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc,
++ ag->stop_desc_dma);
++err_free_irq:
++ free_irq(dev->irq, dev);
++err_unmap_base:
++ iounmap(ag->mac_base);
++err_free_dev:
++ kfree(dev);
++err_out:
++ platform_set_drvdata(pdev, NULL);
++ return err;
++}
++
++static int ag71xx_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++
++ if (dev) {
++ struct ag71xx *ag = netdev_priv(dev);
++
++ ag71xx_debugfs_exit(ag);
++ ag71xx_phy_disconnect(ag);
++ unregister_netdev(dev);
++ free_irq(dev->irq, dev);
++ iounmap(ag->mac_base);
++ kfree(dev);
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static struct platform_driver ag71xx_driver = {
++ .probe = ag71xx_probe,
++ .remove = ag71xx_remove,
++ .driver = {
++ .name = AG71XX_DRV_NAME,
++ }
++};
++
++static int __init ag71xx_module_init(void)
++{
++ int ret;
++
++ ret = ag71xx_debugfs_root_init();
++ if (ret)
++ goto err_out;
++
++ ret = ag71xx_mdio_driver_init();
++ if (ret)
++ goto err_debugfs_exit;
++
++ ret = platform_driver_register(&ag71xx_driver);
++ if (ret)
++ goto err_mdio_exit;
++
++ return 0;
++
++err_mdio_exit:
++ ag71xx_mdio_driver_exit();
++err_debugfs_exit:
++ ag71xx_debugfs_root_exit();
++err_out:
++ return ret;
++}
++
++static void __exit ag71xx_module_exit(void)
++{
++ platform_driver_unregister(&ag71xx_driver);
++ ag71xx_mdio_driver_exit();
++ ag71xx_debugfs_root_exit();
++}
++
++module_init(ag71xx_module_init);
++module_exit(ag71xx_module_exit);
++
++MODULE_VERSION(AG71XX_DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c 2015-09-13 19:45:36.378555081 +0200
+@@ -0,0 +1,318 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AG71XX_MDIO_RETRY 1000
++#define AG71XX_MDIO_DELAY 5
++
++static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
++ u32 value)
++{
++ void __iomem *r;
++
++ r = am->mdio_base + reg;
++ __raw_writel(value, r);
++
++ /* flush write */
++ (void) __raw_readl(r);
++}
++
++static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
++{
++ return __raw_readl(am->mdio_base + reg);
++}
++
++static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
++{
++ DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
++ am->mii_bus->name,
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
++ DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
++ am->mii_bus->name,
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
++}
++
++static int ag71xx_mdio_wait_busy(struct ag71xx_mdio *am)
++{
++ int i;
++
++ for (i = 0; i < AG71XX_MDIO_RETRY; i++) {
++ u32 busy;
++
++ udelay(AG71XX_MDIO_DELAY);
++
++ busy = ag71xx_mdio_rr(am, AG71XX_REG_MII_IND);
++ if (!busy)
++ return 0;
++
++ udelay(AG71XX_MDIO_DELAY);
++ }
++
++ pr_err("%s: MDIO operation timed out\n", am->mii_bus->name);
++
++ return -ETIMEDOUT;
++}
++
++int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
++{
++ int err;
++ int ret;
++
++ err = ag71xx_mdio_wait_busy(am);
++ if (err)
++ return 0xffff;
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
++ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
++
++ err = ag71xx_mdio_wait_busy(am);
++ if (err)
++ return 0xffff;
++
++ ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
++
++ DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
++
++ return ret;
++}
++
++void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val)
++{
++ DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
++ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
++
++ ag71xx_mdio_wait_busy(am);
++}
++
++static const u32 ar71xx_mdio_div_table[] = {
++ 4, 4, 6, 8, 10, 14, 20, 28,
++};
++
++static const u32 ar7240_mdio_div_table[] = {
++ 2, 2, 4, 6, 8, 12, 18, 26, 32, 40, 48, 56, 62, 70, 78, 96,
++};
++
++static const u32 ar933x_mdio_div_table[] = {
++ 4, 4, 6, 8, 10, 14, 20, 28, 34, 42, 50, 58, 66, 74, 82, 98,
++};
++
++static int ag71xx_mdio_get_divider(struct ag71xx_mdio *am, u32 *div)
++{
++ unsigned long ref_clock, mdio_clock;
++ const u32 *table;
++ int ndivs;
++ int i;
++
++ ref_clock = am->pdata->ref_clock;
++ mdio_clock = am->pdata->mdio_clock;
++
++ if (!ref_clock || !mdio_clock)
++ return -EINVAL;
++
++ if (am->pdata->is_ar9330 || am->pdata->is_ar934x) {
++ table = ar933x_mdio_div_table;
++ ndivs = ARRAY_SIZE(ar933x_mdio_div_table);
++ } else if (am->pdata->is_ar7240) {
++ table = ar7240_mdio_div_table;
++ ndivs = ARRAY_SIZE(ar7240_mdio_div_table);
++ } else {
++ table = ar71xx_mdio_div_table;
++ ndivs = ARRAY_SIZE(ar71xx_mdio_div_table);
++ }
++
++ for (i = 0; i < ndivs; i++) {
++ unsigned long t;
++
++ t = ref_clock / table[i];
++ if (t <= mdio_clock) {
++ *div = i;
++ return 0;
++ }
++ }
++
++ dev_err(&am->mii_bus->dev, "no divider found for %lu/%lu\n",
++ ref_clock, mdio_clock);
++ return -ENOENT;
++}
++
++static int ag71xx_mdio_reset(struct mii_bus *bus)
++{
++ struct ag71xx_mdio *am = bus->priv;
++ u32 t;
++ int err;
++
++ err = ag71xx_mdio_get_divider(am, &t);
++ if (err) {
++ /* fallback */
++ if (am->pdata->is_ar7240)
++ t = MII_CFG_CLK_DIV_6;
++ else if (am->pdata->builtin_switch && !am->pdata->is_ar934x)
++ t = MII_CFG_CLK_DIV_10;
++ else if (!am->pdata->builtin_switch && am->pdata->is_ar934x)
++ t = MII_CFG_CLK_DIV_58;
++ else
++ t = MII_CFG_CLK_DIV_28;
++ }
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
++ udelay(100);
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t);
++ udelay(100);
++
++ if (am->pdata->reset)
++ am->pdata->reset(bus);
++
++ return 0;
++}
++
++static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
++{
++ struct ag71xx_mdio *am = bus->priv;
++
++ if (am->pdata->builtin_switch)
++ return ar7240sw_phy_read(bus, addr, reg);
++ else
++ return ag71xx_mdio_mii_read(am, addr, reg);
++}
++
++static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
++{
++ struct ag71xx_mdio *am = bus->priv;
++
++ if (am->pdata->builtin_switch)
++ ar7240sw_phy_write(bus, addr, reg, val);
++ else
++ ag71xx_mdio_mii_write(am, addr, reg, val);
++ return 0;
++}
++
++static int ag71xx_mdio_probe(struct platform_device *pdev)
++{
++ struct ag71xx_mdio_platform_data *pdata;
++ struct ag71xx_mdio *am;
++ struct resource *res;
++ int i;
++ int err;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata) {
++ dev_err(&pdev->dev, "no platform data specified\n");
++ return -EINVAL;
++ }
++
++ am = kzalloc(sizeof(*am), GFP_KERNEL);
++ if (!am) {
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ am->pdata = pdata;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no iomem resource found\n");
++ err = -ENXIO;
++ goto err_out;
++ }
++
++ am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
++ if (!am->mdio_base) {
++ dev_err(&pdev->dev, "unable to ioremap registers\n");
++ err = -ENOMEM;
++ goto err_free_mdio;
++ }
++
++ am->mii_bus = mdiobus_alloc();
++ if (am->mii_bus == NULL) {
++ err = -ENOMEM;
++ goto err_iounmap;
++ }
++
++ am->mii_bus->name = "ag71xx_mdio";
++ am->mii_bus->read = ag71xx_mdio_read;
++ am->mii_bus->write = ag71xx_mdio_write;
++ am->mii_bus->reset = ag71xx_mdio_reset;
++ am->mii_bus->irq = am->mii_irq;
++ am->mii_bus->priv = am;
++ am->mii_bus->parent = &pdev->dev;
++ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
++ am->mii_bus->phy_mask = pdata->phy_mask;
++
++ for (i = 0; i < PHY_MAX_ADDR; i++)
++ am->mii_irq[i] = PHY_POLL;
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
++
++ err = mdiobus_register(am->mii_bus);
++ if (err)
++ goto err_free_bus;
++
++ ag71xx_mdio_dump_regs(am);
++
++ platform_set_drvdata(pdev, am);
++ return 0;
++
++err_free_bus:
++ mdiobus_free(am->mii_bus);
++err_iounmap:
++ iounmap(am->mdio_base);
++err_free_mdio:
++ kfree(am);
++err_out:
++ return err;
++}
++
++static int ag71xx_mdio_remove(struct platform_device *pdev)
++{
++ struct ag71xx_mdio *am = platform_get_drvdata(pdev);
++
++ if (am) {
++ mdiobus_unregister(am->mii_bus);
++ mdiobus_free(am->mii_bus);
++ iounmap(am->mdio_base);
++ kfree(am);
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static struct platform_driver ag71xx_mdio_driver = {
++ .probe = ag71xx_mdio_probe,
++ .remove = ag71xx_mdio_remove,
++ .driver = {
++ .name = "ag71xx-mdio",
++ }
++};
++
++int __init ag71xx_mdio_driver_init(void)
++{
++ return platform_driver_register(&ag71xx_mdio_driver);
++}
++
++void ag71xx_mdio_driver_exit(void)
++{
++ platform_driver_unregister(&ag71xx_mdio_driver);
++}
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c 2015-09-13 19:45:36.378555081 +0200
+@@ -0,0 +1,235 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++static void ag71xx_phy_link_adjust(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct phy_device *phydev = ag->phy_dev;
++ unsigned long flags;
++ int status_change = 0;
++
++ spin_lock_irqsave(&ag->lock, flags);
++
++ if (phydev->link) {
++ if (ag->duplex != phydev->duplex
++ || ag->speed != phydev->speed) {
++ status_change = 1;
++ }
++ }
++
++ if (phydev->link != ag->link)
++ status_change = 1;
++
++ ag->link = phydev->link;
++ ag->duplex = phydev->duplex;
++ ag->speed = phydev->speed;
++
++ if (status_change)
++ ag71xx_link_adjust(ag);
++
++ spin_unlock_irqrestore(&ag->lock, flags);
++}
++
++void ag71xx_phy_start(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ if (ag->phy_dev) {
++ phy_start(ag->phy_dev);
++ } else if (pdata->mii_bus_dev && pdata->switch_data) {
++ ag71xx_ar7240_start(ag);
++ } else {
++ ag->link = 1;
++ ag71xx_link_adjust(ag);
++ }
++}
++
++void ag71xx_phy_stop(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ unsigned long flags;
++
++ if (ag->phy_dev)
++ phy_stop(ag->phy_dev);
++ else if (pdata->mii_bus_dev && pdata->switch_data)
++ ag71xx_ar7240_stop(ag);
++
++ spin_lock_irqsave(&ag->lock, flags);
++ if (ag->link) {
++ ag->link = 0;
++ ag71xx_link_adjust(ag);
++ }
++ spin_unlock_irqrestore(&ag->lock, flags);
++}
++
++static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
++{
++ struct device *dev = &ag->pdev->dev;
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ int ret = 0;
++
++ /* use fixed settings */
++ switch (pdata->speed) {
++ case SPEED_10:
++ case SPEED_100:
++ case SPEED_1000:
++ break;
++ default:
++ dev_err(dev, "invalid speed specified\n");
++ ret = -EINVAL;
++ break;
++ }
++
++ dev_dbg(dev, "using fixed link parameters\n");
++
++ ag->duplex = pdata->duplex;
++ ag->speed = pdata->speed;
++
++ return ret;
++}
++
++static int ag71xx_phy_connect_multi(struct ag71xx *ag)
++{
++ struct device *dev = &ag->pdev->dev;
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ struct phy_device *phydev = NULL;
++ int phy_addr;
++ int ret = 0;
++
++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++ if (!(pdata->phy_mask & (1 << phy_addr)))
++ continue;
++
++ if (ag->mii_bus->phy_map[phy_addr] == NULL)
++ continue;
++
++ DBG("%s: PHY found at %s, uid=%08x\n",
++ dev_name(dev),
++ dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
++ ag->mii_bus->phy_map[phy_addr]->phy_id);
++
++ if (phydev == NULL)
++ phydev = ag->mii_bus->phy_map[phy_addr];
++ }
++
++ if (!phydev) {
++ dev_err(dev, "no PHY found with phy_mask=%08x\n",
++ pdata->phy_mask);
++ return -ENODEV;
++ }
++
++ ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev),
++ &ag71xx_phy_link_adjust,
++ pdata->phy_if_mode);
++
++ if (IS_ERR(ag->phy_dev)) {
++ dev_err(dev, "could not connect to PHY at %s\n",
++ dev_name(&phydev->dev));
++ return PTR_ERR(ag->phy_dev);
++ }
++
++ /* mask with MAC supported features */
++ if (pdata->has_gbit)
++ phydev->supported &= PHY_GBIT_FEATURES;
++ else
++ phydev->supported &= PHY_BASIC_FEATURES;
++
++ phydev->advertising = phydev->supported;
++
++ dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
++ dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name);
++
++ ag->link = 0;
++ ag->speed = 0;
++ ag->duplex = -1;
++
++ return ret;
++}
++
++static int dev_is_class(struct device *dev, void *class)
++{
++ if (dev->class != NULL && !strcmp(dev->class->name, class))
++ return 1;
++
++ return 0;
++}
++
++static struct device *dev_find_class(struct device *parent, char *class)
++{
++ if (dev_is_class(parent, class)) {
++ get_device(parent);
++ return parent;
++ }
++
++ return device_find_child(parent, class, dev_is_class);
++}
++
++static struct mii_bus *dev_to_mii_bus(struct device *dev)
++{
++ struct device *d;
++
++ d = dev_find_class(dev, "mdio_bus");
++ if (d != NULL) {
++ struct mii_bus *bus;
++
++ bus = to_mii_bus(d);
++ put_device(d);
++
++ return bus;
++ }
++
++ return NULL;
++}
++
++int ag71xx_phy_connect(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ if (pdata->mii_bus_dev == NULL ||
++ pdata->mii_bus_dev->bus == NULL )
++ return ag71xx_phy_connect_fixed(ag);
++
++ ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
++ if (ag->mii_bus == NULL) {
++ dev_err(&ag->pdev->dev, "unable to find MII bus on device '%s'\n",
++ dev_name(pdata->mii_bus_dev));
++ return -ENODEV;
++ }
++
++ /* Reset the mdio bus explicitly */
++ if (ag->mii_bus->reset) {
++ mutex_lock(&ag->mii_bus->mdio_lock);
++ ag->mii_bus->reset(ag->mii_bus);
++ mutex_unlock(&ag->mii_bus->mdio_lock);
++ }
++
++ if (pdata->switch_data)
++ return ag71xx_ar7240_init(ag);
++
++ if (pdata->phy_mask)
++ return ag71xx_phy_connect_multi(ag);
++
++ return ag71xx_phy_connect_fixed(ag);
++}
++
++void ag71xx_phy_disconnect(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ if (pdata->switch_data)
++ ag71xx_ar7240_cleanup(ag);
++ else if (ag->phy_dev)
++ phy_disconnect(ag->phy_dev);
++}
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/Kconfig linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/Kconfig
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/Kconfig 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,33 @@
++config AG71XX
++ tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
++ depends on ATH79
++ select PHYLIB
++ help
++ If you wish to compile a kernel for AR7XXX/91XXX and enable
++ ethernet support, then you should always answer Y to this.
++
++if AG71XX
++
++config AG71XX_DEBUG
++ bool "Atheros AR71xx built-in ethernet driver debugging"
++ default n
++ help
++ Atheros AR71xx built-in ethernet driver debugging messages.
++
++config AG71XX_DEBUG_FS
++ bool "Atheros AR71xx built-in ethernet driver debugfs support"
++ depends on DEBUG_FS
++ default n
++ help
++ Say Y, if you need access to various statistics provided by
++ the ag71xx driver.
++
++config AG71XX_AR8216_SUPPORT
++ bool "special support for the Atheros AR8216 switch"
++ default n
++ default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU
++ help
++ Say 'y' here if you want to enable special support for the
++ Atheros AR8216 switch found on some boards.
++
++endif
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/Makefile linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/Makefile
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/ag71xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/ethernet/atheros/ag71xx/Makefile 2015-09-13 19:45:36.374555224 +0200
+@@ -0,0 +1,15 @@
++#
++# Makefile for the Atheros AR71xx built-in ethernet macs
++#
++
++ag71xx-y += ag71xx_main.o
++ag71xx-y += ag71xx_ethtool.o
++ag71xx-y += ag71xx_phy.o
++ag71xx-y += ag71xx_mdio.o
++ag71xx-y += ag71xx_ar7240.o
++
++ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o
++ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o
++
++obj-$(CONFIG_AG71XX) += ag71xx.o
++
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/Kconfig linux-4.1.6/drivers/net/ethernet/atheros/Kconfig
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/ethernet/atheros/Kconfig 2015-09-13 19:45:36.374555224 +0200
+@@ -80,4 +80,6 @@
+ To compile this driver as a module, choose M here. The module
+ will be called alx.
+
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+diff -Nur linux-4.1.6.orig/drivers/net/ethernet/atheros/Makefile linux-4.1.6/drivers/net/ethernet/atheros/Makefile
+--- linux-4.1.6.orig/drivers/net/ethernet/atheros/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/ethernet/atheros/Makefile 2015-09-13 19:45:36.374555224 +0200
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0005-spi-add-various-flags-to-spi_transfer-and-spi_messag.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0005-spi-add-various-flags-to-spi_transfer-and-spi_messag.patch
new file mode 100644
index 000000000..505562fe0
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0005-spi-add-various-flags-to-spi_transfer-and-spi_messag.patch
@@ -0,0 +1,34 @@
+From 34dcc540e28cc2253fd3bdaacdd77faf1d42d759 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 00:17:06 +0200
+Subject: [PATCH] spi: add various flags to spi_transfer and spi_message
+ structs
+
+---
+ include/linux/spi/spi.h | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
+index 4203c66..4ee1a02 100644
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -581,6 +581,8 @@ struct spi_transfer {
+ dma_addr_t rx_dma;
+
+ unsigned cs_change:1;
++ unsigned verify:1;
++ unsigned fast_write:1;
+ unsigned tx_nbits:3;
+ unsigned rx_nbits:3;
+ #define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */
+@@ -627,6 +629,7 @@ struct spi_message {
+ struct spi_device *spi;
+
+ unsigned is_dma_mapped:1;
++ unsigned fast_read:1;
+
+ /* REVISIT: we might want a flag affecting the behavior of the
+ * last transfer ... allowing things like "read 16 bit length L"
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0006-spi-add-rb4xx-SPI-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0006-spi-add-rb4xx-SPI-driver.patch
new file mode 100644
index 000000000..2be5fb19b
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0006-spi-add-rb4xx-SPI-driver.patch
@@ -0,0 +1,538 @@
+diff -Nur linux-4.1.6.orig/drivers/spi/Kconfig linux-4.1.6/drivers/spi/Kconfig
+--- linux-4.1.6.orig/drivers/spi/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/spi/Kconfig 2015-09-16 00:01:05.048633923 +0200
+@@ -448,6 +448,12 @@
+ This driver can also be built as a module. If so, the module
+ will be called spi_qup.
+
++config SPI_RB4XX
++ tristate "Mikrotik RB4XX SPI master"
++ depends on SPI_MASTER && ATH79_MACH_RB4XX
++ help
++ SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX
+diff -Nur linux-4.1.6.orig/drivers/spi/Makefile linux-4.1.6/drivers/spi/Makefile
+--- linux-4.1.6.orig/drivers/spi/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/spi/Makefile 2015-09-16 00:01:30.403160725 +0200
+@@ -64,6 +64,7 @@
+ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
+ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+ obj-$(CONFIG_SPI_QUP) += spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+diff -Nur linux-4.1.6.orig/drivers/spi/spi-rb4xx.c linux-4.1.6/drivers/spi/spi-rb4xx.c
+--- linux-4.1.6.orig/drivers/spi/spi-rb4xx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/spi/spi-rb4xx.c 2015-09-16 00:01:05.048633923 +0200
+@@ -0,0 +1,507 @@
++/*
++ * SPI controller driver for the Mikrotik RB4xx boards
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was based on the patches for Linux 2.6.27.39 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#define DRV_NAME "rb4xx-spi"
++#define DRV_DESC "Mikrotik RB4xx SPI controller driver"
++#define DRV_VERSION "0.1.0"
++
++#define SPI_CTRL_FASTEST 0x40
++#define SPI_FLASH_HZ 33333334
++#define SPI_CPLD_HZ 33333334
++
++#define CPLD_CMD_READ_FAST 0x0b
++
++#undef RB4XX_SPI_DEBUG
++
++struct rb4xx_spi {
++ void __iomem *base;
++ struct spi_master *master;
++
++ unsigned spi_ctrl_flash;
++ unsigned spi_ctrl_fread;
++
++ struct clk *ahb_clk;
++ unsigned long ahb_freq;
++
++ spinlock_t lock;
++ struct list_head queue;
++ int busy:1;
++ int cs_wait;
++};
++
++static unsigned spi_clk_low = AR71XX_SPI_IOC_CS1;
++
++#ifdef RB4XX_SPI_DEBUG
++static inline void do_spi_delay(void)
++{
++ ndelay(20000);
++}
++#else
++static inline void do_spi_delay(void) { }
++#endif
++
++static inline void do_spi_init(struct spi_device *spi)
++{
++ unsigned cs = AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1;
++
++ if (!(spi->mode & SPI_CS_HIGH))
++ cs ^= (spi->chip_select == 2) ? AR71XX_SPI_IOC_CS1 :
++ AR71XX_SPI_IOC_CS0;
++
++ spi_clk_low = cs;
++}
++
++static inline void do_spi_finish(void __iomem *base)
++{
++ do_spi_delay();
++ __raw_writel(AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1,
++ base + AR71XX_SPI_REG_IOC);
++}
++
++static inline void do_spi_clk(void __iomem *base, int bit)
++{
++ unsigned bval = spi_clk_low | ((bit & 1) ? AR71XX_SPI_IOC_DO : 0);
++
++ do_spi_delay();
++ __raw_writel(bval, base + AR71XX_SPI_REG_IOC);
++ do_spi_delay();
++ __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
++}
++
++static void do_spi_byte(void __iomem *base, unsigned char byte)
++{
++ do_spi_clk(base, byte >> 7);
++ do_spi_clk(base, byte >> 6);
++ do_spi_clk(base, byte >> 5);
++ do_spi_clk(base, byte >> 4);
++ do_spi_clk(base, byte >> 3);
++ do_spi_clk(base, byte >> 2);
++ do_spi_clk(base, byte >> 1);
++ do_spi_clk(base, byte);
++
++ pr_debug("spi_byte sent 0x%02x got 0x%02x\n",
++ (unsigned)byte,
++ (unsigned char)__raw_readl(base + AR71XX_SPI_REG_RDS));
++}
++
++static inline void do_spi_clk_fast(void __iomem *base, unsigned bit1,
++ unsigned bit2)
++{
++ unsigned bval = (spi_clk_low |
++ ((bit1 & 1) ? AR71XX_SPI_IOC_DO : 0) |
++ ((bit2 & 1) ? AR71XX_SPI_IOC_CS2 : 0));
++ do_spi_delay();
++ __raw_writel(bval, base + AR71XX_SPI_REG_IOC);
++ do_spi_delay();
++ __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
++}
++
++static void do_spi_byte_fast(void __iomem *base, unsigned char byte)
++{
++ do_spi_clk_fast(base, byte >> 7, byte >> 6);
++ do_spi_clk_fast(base, byte >> 5, byte >> 4);
++ do_spi_clk_fast(base, byte >> 3, byte >> 2);
++ do_spi_clk_fast(base, byte >> 1, byte >> 0);
++
++ pr_debug("spi_byte_fast sent 0x%02x got 0x%02x\n",
++ (unsigned)byte,
++ (unsigned char) __raw_readl(base + AR71XX_SPI_REG_RDS));
++}
++
++static int rb4xx_spi_txrx(void __iomem *base, struct spi_transfer *t)
++{
++ const unsigned char *rxv_ptr = NULL;
++ const unsigned char *tx_ptr = t->tx_buf;
++ unsigned char *rx_ptr = t->rx_buf;
++ unsigned i;
++
++ pr_debug("spi_txrx len %u tx %u rx %u\n",
++ t->len,
++ (t->tx_buf ? 1 : 0),
++ (t->rx_buf ? 1 : 0));
++
++ if (t->verify) {
++ rxv_ptr = tx_ptr;
++ tx_ptr = NULL;
++ }
++
++ for (i = 0; i < t->len; ++i) {
++ unsigned char sdata = tx_ptr ? tx_ptr[i] : 0;
++
++ if (t->fast_write)
++ do_spi_byte_fast(base, sdata);
++ else
++ do_spi_byte(base, sdata);
++
++ if (rx_ptr) {
++ rx_ptr[i] = __raw_readl(base + AR71XX_SPI_REG_RDS) & 0xff;
++ } else if (rxv_ptr) {
++ unsigned char c = __raw_readl(base + AR71XX_SPI_REG_RDS);
++ if (rxv_ptr[i] != c)
++ return i;
++ }
++ }
++
++ return i;
++}
++
++static int rb4xx_spi_read_fast(struct rb4xx_spi *rbspi,
++ struct spi_message *m)
++{
++ struct spi_transfer *t;
++ const unsigned char *tx_ptr;
++ unsigned addr;
++ void __iomem *base = rbspi->base;
++
++ /* check for exactly two transfers */
++ if (list_empty(&m->transfers) ||
++ list_is_last(m->transfers.next, &m->transfers) ||
++ !list_is_last(m->transfers.next->next, &m->transfers)) {
++ return -1;
++ }
++
++ /* first transfer contains command and address */
++ t = list_entry(m->transfers.next,
++ struct spi_transfer, transfer_list);
++
++ if (t->len != 5 || t->tx_buf == NULL)
++ return -1;
++
++ tx_ptr = t->tx_buf;
++ if (tx_ptr[0] != CPLD_CMD_READ_FAST)
++ return -1;
++
++ addr = tx_ptr[1];
++ addr = tx_ptr[2] | (addr << 8);
++ addr = tx_ptr[3] | (addr << 8);
++ addr += (unsigned) base;
++
++ m->actual_length += t->len;
++
++ /* second transfer contains data itself */
++ t = list_entry(m->transfers.next->next,
++ struct spi_transfer, transfer_list);
++
++ if (t->tx_buf && !t->verify)
++ return -1;
++
++ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
++ __raw_writel(rbspi->spi_ctrl_fread, base + AR71XX_SPI_REG_CTRL);
++ __raw_writel(0, base + AR71XX_SPI_REG_FS);
++
++ if (t->rx_buf) {
++ memcpy(t->rx_buf, (const void *)addr, t->len);
++ } else if (t->tx_buf) {
++ unsigned char buf[t->len];
++ memcpy(buf, (const void *)addr, t->len);
++ if (memcmp(t->tx_buf, buf, t->len) != 0)
++ m->status = -EMSGSIZE;
++ }
++ m->actual_length += t->len;
++
++ if (rbspi->spi_ctrl_flash != rbspi->spi_ctrl_fread) {
++ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
++ __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL);
++ __raw_writel(0, base + AR71XX_SPI_REG_FS);
++ }
++
++ return 0;
++}
++
++static int rb4xx_spi_msg(struct rb4xx_spi *rbspi, struct spi_message *m)
++{
++ struct spi_transfer *t = NULL;
++ void __iomem *base = rbspi->base;
++
++ m->status = 0;
++ if (list_empty(&m->transfers))
++ return -1;
++
++ if (m->fast_read)
++ if (rb4xx_spi_read_fast(rbspi, m) == 0)
++ return -1;
++
++ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
++ __raw_writel(SPI_CTRL_FASTEST, base + AR71XX_SPI_REG_CTRL);
++ do_spi_init(m->spi);
++
++ list_for_each_entry(t, &m->transfers, transfer_list) {
++ int len;
++
++ len = rb4xx_spi_txrx(base, t);
++ if (len != t->len) {
++ m->status = -EMSGSIZE;
++ break;
++ }
++ m->actual_length += len;
++
++ if (t->cs_change) {
++ if (list_is_last(&t->transfer_list, &m->transfers)) {
++ /* wait for continuation */
++ return m->spi->chip_select;
++ }
++ do_spi_finish(base);
++ ndelay(100);
++ }
++ }
++
++ do_spi_finish(base);
++ __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL);
++ __raw_writel(0, base + AR71XX_SPI_REG_FS);
++ return -1;
++}
++
++static void rb4xx_spi_process_queue_locked(struct rb4xx_spi *rbspi,
++ unsigned long *flags)
++{
++ int cs = rbspi->cs_wait;
++
++ rbspi->busy = 1;
++ while (!list_empty(&rbspi->queue)) {
++ struct spi_message *m;
++
++ list_for_each_entry(m, &rbspi->queue, queue)
++ if (cs < 0 || cs == m->spi->chip_select)
++ break;
++
++ if (&m->queue == &rbspi->queue)
++ break;
++
++ list_del_init(&m->queue);
++ spin_unlock_irqrestore(&rbspi->lock, *flags);
++
++ cs = rb4xx_spi_msg(rbspi, m);
++ m->complete(m->context);
++
++ spin_lock_irqsave(&rbspi->lock, *flags);
++ }
++
++ rbspi->cs_wait = cs;
++ rbspi->busy = 0;
++
++ if (cs >= 0) {
++ /* TODO: add timer to unlock cs after 1s inactivity */
++ }
++}
++
++static int rb4xx_spi_transfer(struct spi_device *spi,
++ struct spi_message *m)
++{
++ struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
++ unsigned long flags;
++
++ m->actual_length = 0;
++ m->status = -EINPROGRESS;
++
++ spin_lock_irqsave(&rbspi->lock, flags);
++ list_add_tail(&m->queue, &rbspi->queue);
++ if (rbspi->busy ||
++ (rbspi->cs_wait >= 0 && rbspi->cs_wait != m->spi->chip_select)) {
++ /* job will be done later */
++ spin_unlock_irqrestore(&rbspi->lock, flags);
++ return 0;
++ }
++
++ /* process job in current context */
++ rb4xx_spi_process_queue_locked(rbspi, &flags);
++ spin_unlock_irqrestore(&rbspi->lock, flags);
++
++ return 0;
++}
++
++static int rb4xx_spi_setup(struct spi_device *spi)
++{
++ struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
++ unsigned long flags;
++
++ if (spi->mode & ~(SPI_CS_HIGH)) {
++ dev_err(&spi->dev, "mode %x not supported\n",
++ (unsigned) spi->mode);
++ return -EINVAL;
++ }
++
++ if (spi->bits_per_word != 8 && spi->bits_per_word != 0) {
++ dev_err(&spi->dev, "bits_per_word %u not supported\n",
++ (unsigned) spi->bits_per_word);
++ return -EINVAL;
++ }
++
++ spin_lock_irqsave(&rbspi->lock, flags);
++ if (rbspi->cs_wait == spi->chip_select && !rbspi->busy) {
++ rbspi->cs_wait = -1;
++ rb4xx_spi_process_queue_locked(rbspi, &flags);
++ }
++ spin_unlock_irqrestore(&rbspi->lock, flags);
++
++ return 0;
++}
++
++static unsigned get_spi_ctrl(struct rb4xx_spi *rbspi, unsigned hz_max,
++ const char *name)
++{
++ unsigned div;
++
++ div = (rbspi->ahb_freq - 1) / (2 * hz_max);
++
++ /*
++ * CPU has a bug at (div == 0) - first bit read is random
++ */
++ if (div == 0)
++ ++div;
++
++ if (name) {
++ unsigned ahb_khz = (rbspi->ahb_freq + 500) / 1000;
++ unsigned div_real = 2 * (div + 1);
++ pr_debug("rb4xx: %s SPI clock %u kHz (AHB %u kHz / %u)\n",
++ name,
++ ahb_khz / div_real,
++ ahb_khz, div_real);
++ }
++
++ return SPI_CTRL_FASTEST + div;
++}
++
++static int rb4xx_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rb4xx_spi *rbspi;
++ struct resource *r;
++ int err = 0;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
++ if (master == NULL) {
++ dev_err(&pdev->dev, "no memory for spi_master\n");
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ master->bus_num = 0;
++ master->num_chipselect = 3;
++ master->setup = rb4xx_spi_setup;
++ master->transfer = rb4xx_spi_transfer;
++
++ rbspi = spi_master_get_devdata(master);
++
++ rbspi->ahb_clk = clk_get(&pdev->dev, "ahb");
++ if (IS_ERR(rbspi->ahb_clk)) {
++ err = PTR_ERR(rbspi->ahb_clk);
++ goto err_put_master;
++ }
++
++ err = clk_enable(rbspi->ahb_clk);
++ if (err)
++ goto err_clk_put;
++
++ rbspi->ahb_freq = clk_get_rate(rbspi->ahb_clk);
++ if (!rbspi->ahb_freq) {
++ err = -EINVAL;
++ goto err_clk_disable;
++ }
++
++ platform_set_drvdata(pdev, rbspi);
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (r == NULL) {
++ err = -ENOENT;
++ goto err_clk_disable;
++ }
++
++ rbspi->base = ioremap(r->start, r->end - r->start + 1);
++ if (!rbspi->base) {
++ err = -ENXIO;
++ goto err_clk_disable;
++ }
++
++ rbspi->master = master;
++ rbspi->spi_ctrl_flash = get_spi_ctrl(rbspi, SPI_FLASH_HZ, "FLASH");
++ rbspi->spi_ctrl_fread = get_spi_ctrl(rbspi, SPI_CPLD_HZ, "CPLD");
++ rbspi->cs_wait = -1;
++
++ spin_lock_init(&rbspi->lock);
++ INIT_LIST_HEAD(&rbspi->queue);
++
++ err = spi_register_master(master);
++ if (err) {
++ dev_err(&pdev->dev, "failed to register SPI master\n");
++ goto err_iounmap;
++ }
++
++ return 0;
++
++err_iounmap:
++ iounmap(rbspi->base);
++err_clk_disable:
++ clk_disable(rbspi->ahb_clk);
++err_clk_put:
++ clk_put(rbspi->ahb_clk);
++err_put_master:
++ platform_set_drvdata(pdev, NULL);
++ spi_master_put(master);
++err_out:
++ return err;
++}
++
++static int rb4xx_spi_remove(struct platform_device *pdev)
++{
++ struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
++
++ iounmap(rbspi->base);
++ clk_disable(rbspi->ahb_clk);
++ clk_put(rbspi->ahb_clk);
++ platform_set_drvdata(pdev, NULL);
++ spi_master_put(rbspi->master);
++
++ return 0;
++}
++
++static struct platform_driver rb4xx_spi_drv = {
++ .probe = rb4xx_spi_probe,
++ .remove = rb4xx_spi_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init rb4xx_spi_init(void)
++{
++ return platform_driver_register(&rb4xx_spi_drv);
++}
++subsys_initcall(rb4xx_spi_init);
++
++static void __exit rb4xx_spi_exit(void)
++{
++ platform_driver_unregister(&rb4xx_spi_drv);
++}
++
++module_exit(rb4xx_spi_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0007-spi-add-rb4xx-cpld-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0007-spi-add-rb4xx-cpld-driver.patch
new file mode 100644
index 000000000..a7ff2c4cd
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0007-spi-add-rb4xx-cpld-driver.patch
@@ -0,0 +1,525 @@
+diff -Nur linux-4.1.6.orig/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h linux-4.1.6/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
+--- linux-4.1.6.orig/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h 2015-09-13 19:28:51.200198278 +0200
+@@ -0,0 +1,48 @@
++/*
++ * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was based on the patches for Linux 2.6.27.39 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#define CPLD_GPIO_nLED1 0
++#define CPLD_GPIO_nLED2 1
++#define CPLD_GPIO_nLED3 2
++#define CPLD_GPIO_nLED4 3
++#define CPLD_GPIO_FAN 4
++#define CPLD_GPIO_ALE 5
++#define CPLD_GPIO_CLE 6
++#define CPLD_GPIO_nCE 7
++#define CPLD_GPIO_nLED5 8
++
++#define CPLD_NUM_GPIOS 9
++
++#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1)
++#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2)
++#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3)
++#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4)
++#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN)
++#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE)
++#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE)
++#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE)
++#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5)
++
++struct rb4xx_cpld_platform_data {
++ unsigned gpio_base;
++};
++
++extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
++extern int rb4xx_cpld_read(unsigned char *rx_buf,
++ const unsigned char *verify_buf,
++ unsigned cnt);
++extern int rb4xx_cpld_read_from(unsigned addr,
++ unsigned char *rx_buf,
++ const unsigned char *verify_buf,
++ unsigned cnt);
++extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);
+diff -Nur linux-4.1.6.orig/drivers/spi/Kconfig linux-4.1.6/drivers/spi/Kconfig
+--- linux-4.1.6.orig/drivers/spi/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/spi/Kconfig 2015-09-13 19:28:51.200198278 +0200
+@@ -661,6 +661,13 @@
+ sysfs interface, with each line presented as a kind of GPIO
+ exposing both switch control and diagnostic feedback.
+
++config SPI_RB4XX_CPLD
++ tristate "MikroTik RB4XX CPLD driver"
++ depends on ATH79_MACH_RB4XX
++ help
++ SPI driver for the Xilinx CPLD chip present on the
++ MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+diff -Nur linux-4.1.6.orig/drivers/spi/Makefile linux-4.1.6/drivers/spi/Makefile
+--- linux-4.1.6.orig/drivers/spi/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/spi/Makefile 2015-09-13 19:29:38.934613144 +0200
+@@ -65,6 +65,7 @@
+ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_QUP) += spi-qup.o
++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+diff -Nur linux-4.1.6.orig/drivers/spi/spi-rb4xx-cpld.c linux-4.1.6/drivers/spi/spi-rb4xx-cpld.c
+--- linux-4.1.6.orig/drivers/spi/spi-rb4xx-cpld.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/spi/spi-rb4xx-cpld.c 2015-09-13 19:28:51.200198278 +0200
+@@ -0,0 +1,441 @@
++/*
++ * SPI driver for the CPLD chip on the Mikrotik RB4xx boards
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was based on the patches for Linux 2.6.27.39 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/bitops.h>
++#include <linux/spi/spi.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++
++#include <asm/mach-ath79/rb4xx_cpld.h>
++
++#define DRV_NAME "spi-rb4xx-cpld"
++#define DRV_DESC "RB4xx CPLD driver"
++#define DRV_VERSION "0.1.0"
++
++#define CPLD_CMD_WRITE_NAND 0x08 /* send cmd, n x send data, send indle */
++#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */
++#define CPLD_CMD_READ_NAND 0x0a /* send cmd, send idle, n x read data */
++#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */
++#define CPLD_CMD_LED5_ON 0x0c /* send cmd */
++#define CPLD_CMD_LED5_OFF 0x0d /* send cmd */
++
++struct rb4xx_cpld {
++ struct spi_device *spi;
++ struct mutex lock;
++ struct gpio_chip chip;
++ unsigned int config;
++};
++
++static struct rb4xx_cpld *rb4xx_cpld;
++
++static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip)
++{
++ return container_of(chip, struct rb4xx_cpld, chip);
++}
++
++static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd)
++{
++ struct spi_transfer t[1];
++ struct spi_message m;
++ unsigned char tx_buf[1];
++ int err;
++
++ spi_message_init(&m);
++ memset(&t, 0, sizeof(t));
++
++ t[0].tx_buf = tx_buf;
++ t[0].len = sizeof(tx_buf);
++ spi_message_add_tail(&t[0], &m);
++
++ tx_buf[0] = cmd;
++
++ err = spi_sync(cpld->spi, &m);
++ return err;
++}
++
++static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config)
++{
++ struct spi_transfer t[1];
++ struct spi_message m;
++ unsigned char cmd[2];
++ int err;
++
++ spi_message_init(&m);
++ memset(&t, 0, sizeof(t));
++
++ t[0].tx_buf = cmd;
++ t[0].len = sizeof(cmd);
++ spi_message_add_tail(&t[0], &m);
++
++ cmd[0] = CPLD_CMD_WRITE_CFG;
++ cmd[1] = config;
++
++ err = spi_sync(cpld->spi, &m);
++ return err;
++}
++
++static int __rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, unsigned mask,
++ unsigned value)
++{
++ unsigned int config;
++ int err;
++
++ config = cpld->config & ~mask;
++ config |= value;
++
++ if ((cpld->config ^ config) & 0xff) {
++ err = rb4xx_cpld_write_cfg(cpld, config);
++ if (err)
++ return err;
++ }
++
++ if ((cpld->config ^ config) & CPLD_CFG_nLED5) {
++ err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON :
++ CPLD_CMD_LED5_OFF);
++ if (err)
++ return err;
++ }
++
++ cpld->config = config;
++ return 0;
++}
++
++int rb4xx_cpld_change_cfg(unsigned mask, unsigned value)
++{
++ int ret;
++
++ if (rb4xx_cpld == NULL)
++ return -ENODEV;
++
++ mutex_lock(&rb4xx_cpld->lock);
++ ret = __rb4xx_cpld_change_cfg(rb4xx_cpld, mask, value);
++ mutex_unlock(&rb4xx_cpld->lock);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(rb4xx_cpld_change_cfg);
++
++int rb4xx_cpld_read_from(unsigned addr, unsigned char *rx_buf,
++ const unsigned char *verify_buf, unsigned count)
++{
++ const unsigned char cmd[5] = {
++ CPLD_CMD_READ_FAST,
++ (addr >> 16) & 0xff,
++ (addr >> 8) & 0xff,
++ addr & 0xff,
++ 0
++ };
++ struct spi_transfer t[2] = {
++ {
++ .tx_buf = &cmd,
++ .len = 5,
++ },
++ {
++ .tx_buf = verify_buf,
++ .rx_buf = rx_buf,
++ .len = count,
++ .verify = (verify_buf != NULL),
++ },
++ };
++ struct spi_message m;
++
++ if (rb4xx_cpld == NULL)
++ return -ENODEV;
++
++ spi_message_init(&m);
++ m.fast_read = 1;
++ spi_message_add_tail(&t[0], &m);
++ spi_message_add_tail(&t[1], &m);
++ return spi_sync(rb4xx_cpld->spi, &m);
++}
++EXPORT_SYMBOL_GPL(rb4xx_cpld_read_from);
++
++#if 0
++int rb4xx_cpld_read(unsigned char *buf, unsigned char *verify_buf,
++ unsigned count)
++{
++ struct spi_transfer t[2];
++ struct spi_message m;
++ unsigned char cmd[2];
++
++ if (rb4xx_cpld == NULL)
++ return -ENODEV;
++
++ spi_message_init(&m);
++ memset(&t, 0, sizeof(t));
++
++ /* send command */
++ t[0].tx_buf = cmd;
++ t[0].len = sizeof(cmd);
++ spi_message_add_tail(&t[0], &m);
++
++ cmd[0] = CPLD_CMD_READ_NAND;
++ cmd[1] = 0;
++
++ /* read data */
++ t[1].rx_buf = buf;
++ t[1].len = count;
++ spi_message_add_tail(&t[1], &m);
++
++ return spi_sync(rb4xx_cpld->spi, &m);
++}
++#else
++int rb4xx_cpld_read(unsigned char *rx_buf, const unsigned char *verify_buf,
++ unsigned count)
++{
++ static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 };
++ struct spi_transfer t[2] = {
++ {
++ .tx_buf = &cmd,
++ .len = 2,
++ }, {
++ .tx_buf = verify_buf,
++ .rx_buf = rx_buf,
++ .len = count,
++ .verify = (verify_buf != NULL),
++ },
++ };
++ struct spi_message m;
++
++ if (rb4xx_cpld == NULL)
++ return -ENODEV;
++
++ spi_message_init(&m);
++ spi_message_add_tail(&t[0], &m);
++ spi_message_add_tail(&t[1], &m);
++ return spi_sync(rb4xx_cpld->spi, &m);
++}
++#endif
++EXPORT_SYMBOL_GPL(rb4xx_cpld_read);
++
++int rb4xx_cpld_write(const unsigned char *buf, unsigned count)
++{
++#if 0
++ struct spi_transfer t[3];
++ struct spi_message m;
++ unsigned char cmd[1];
++
++ if (rb4xx_cpld == NULL)
++ return -ENODEV;
++
++ memset(&t, 0, sizeof(t));
++ spi_message_init(&m);
++
++ /* send command */
++ t[0].tx_buf = cmd;
++ t[0].len = sizeof(cmd);
++ spi_message_add_tail(&t[0], &m);
++
++ cmd[0] = CPLD_CMD_WRITE_NAND;
++
++ /* write data */
++ t[1].tx_buf = buf;
++ t[1].len = count;
++ spi_message_add_tail(&t[1], &m);
++
++ /* send idle */
++ t[2].len = 1;
++ spi_message_add_tail(&t[2], &m);
++
++ return spi_sync(rb4xx_cpld->spi, &m);
++#else
++ static const unsigned char cmd = CPLD_CMD_WRITE_NAND;
++ struct spi_transfer t[3] = {
++ {
++ .tx_buf = &cmd,
++ .len = 1,
++ }, {
++ .tx_buf = buf,
++ .len = count,
++ .fast_write = 1,
++ }, {
++ .len = 1,
++ .fast_write = 1,
++ },
++ };
++ struct spi_message m;
++
++ if (rb4xx_cpld == NULL)
++ return -ENODEV;
++
++ spi_message_init(&m);
++ spi_message_add_tail(&t[0], &m);
++ spi_message_add_tail(&t[1], &m);
++ spi_message_add_tail(&t[2], &m);
++ return spi_sync(rb4xx_cpld->spi, &m);
++#endif
++}
++EXPORT_SYMBOL_GPL(rb4xx_cpld_write);
++
++static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
++ int ret;
++
++ mutex_lock(&cpld->lock);
++ ret = (cpld->config >> offset) & 1;
++ mutex_unlock(&cpld->lock);
++
++ return ret;
++}
++
++static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, unsigned offset,
++ int value)
++{
++ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
++
++ mutex_lock(&cpld->lock);
++ __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
++ mutex_unlock(&cpld->lock);
++}
++
++static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip,
++ unsigned offset)
++{
++ return -EOPNOTSUPP;
++}
++
++static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset,
++ int value)
++{
++ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
++ int ret;
++
++ mutex_lock(&cpld->lock);
++ ret = __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
++ mutex_unlock(&cpld->lock);
++
++ return ret;
++}
++
++static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base)
++{
++ int err;
++
++ /* init config */
++ cpld->config = CPLD_CFG_nLED1 | CPLD_CFG_nLED2 | CPLD_CFG_nLED3 |
++ CPLD_CFG_nLED4 | CPLD_CFG_nCE;
++ rb4xx_cpld_write_cfg(cpld, cpld->config);
++
++ /* setup GPIO chip */
++ cpld->chip.label = DRV_NAME;
++
++ cpld->chip.get = rb4xx_cpld_gpio_get;
++ cpld->chip.set = rb4xx_cpld_gpio_set;
++ cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input;
++ cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output;
++
++ cpld->chip.base = base;
++ cpld->chip.ngpio = CPLD_NUM_GPIOS;
++ cpld->chip.can_sleep = 1;
++ cpld->chip.dev = &cpld->spi->dev;
++ cpld->chip.owner = THIS_MODULE;
++
++ err = gpiochip_add(&cpld->chip);
++ if (err)
++ dev_err(&cpld->spi->dev, "adding GPIO chip failed, err=%d\n",
++ err);
++
++ return err;
++}
++
++static int rb4xx_cpld_probe(struct spi_device *spi)
++{
++ struct rb4xx_cpld *cpld;
++ struct rb4xx_cpld_platform_data *pdata;
++ int err;
++
++ pdata = spi->dev.platform_data;
++ if (!pdata) {
++ dev_dbg(&spi->dev, "no platform data\n");
++ return -EINVAL;
++ }
++
++ cpld = kzalloc(sizeof(*cpld), GFP_KERNEL);
++ if (!cpld) {
++ dev_err(&spi->dev, "no memory for private data\n");
++ return -ENOMEM;
++ }
++
++ mutex_init(&cpld->lock);
++ cpld->spi = spi_dev_get(spi);
++ dev_set_drvdata(&spi->dev, cpld);
++
++ spi->mode = SPI_MODE_0;
++ spi->bits_per_word = 8;
++ err = spi_setup(spi);
++ if (err) {
++ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
++ goto err_drvdata;
++ }
++
++ err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base);
++ if (err)
++ goto err_drvdata;
++
++ rb4xx_cpld = cpld;
++
++ return 0;
++
++err_drvdata:
++ dev_set_drvdata(&spi->dev, NULL);
++ kfree(cpld);
++
++ return err;
++}
++
++static int rb4xx_cpld_remove(struct spi_device *spi)
++{
++ struct rb4xx_cpld *cpld;
++
++ rb4xx_cpld = NULL;
++ cpld = dev_get_drvdata(&spi->dev);
++ dev_set_drvdata(&spi->dev, NULL);
++ kfree(cpld);
++
++ return 0;
++}
++
++static struct spi_driver rb4xx_cpld_driver = {
++ .driver = {
++ .name = DRV_NAME,
++ .bus = &spi_bus_type,
++ .owner = THIS_MODULE,
++ },
++ .probe = rb4xx_cpld_probe,
++ .remove = rb4xx_cpld_remove,
++};
++
++static int __init rb4xx_cpld_init(void)
++{
++ return spi_register_driver(&rb4xx_cpld_driver);
++}
++module_init(rb4xx_cpld_init);
++
++static void __exit rb4xx_cpld_exit(void)
++{
++ spi_unregister_driver(&rb4xx_cpld_driver);
++}
++module_exit(rb4xx_cpld_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0008-gpio-add-GPIO-latch-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0008-gpio-add-GPIO-latch-driver.patch
new file mode 100644
index 000000000..188cec3b2
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0008-gpio-add-GPIO-latch-driver.patch
@@ -0,0 +1,290 @@
+From dd93d7e5b6530f1574860776fe6f960c4fd2661d Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 00:21:54 +0200
+Subject: [PATCH] gpio: add GPIO latch driver
+
+---
+ drivers/gpio/Kconfig | 7 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-latch.c | 219 +++++++++++++++++++++++++++++++
+ include/linux/platform_data/gpio-latch.h | 14 ++
+ 4 files changed, 241 insertions(+)
+ create mode 100644 drivers/gpio/gpio-latch.c
+ create mode 100644 include/linux/platform_data/gpio-latch.h
+
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 903f24d..905730b 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -834,4 +834,11 @@ config GPIO_VIPERBOARD
+ River Tech's viperboard.h for detailed meaning
+ of the module parameters.
+
++comment "Other GPIO expanders"
++
++config GPIO_LATCH
++ tristate "GPIO latch driver"
++ help
++ Say yes here to enable a GPIO latch driver.
++
+ endif
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 5d50179..7d03524 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -36,6 +36,7 @@ obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
+ obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
+ obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
+ obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
++obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
+ obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
+ obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
+ obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
+diff --git a/drivers/gpio/gpio-latch.c b/drivers/gpio/gpio-latch.c
+new file mode 100644
+index 0000000..1efa1a1
+--- /dev/null
++++ b/drivers/gpio/gpio-latch.c
+@@ -0,0 +1,219 @@
++/*
++ * GPIO latch driver
++ *
++ * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/platform_data/gpio-latch.h>
++
++struct gpio_latch_chip {
++ struct gpio_chip gc;
++
++ struct mutex mutex;
++ struct mutex latch_mutex;
++ bool latch_enabled;
++ int le_gpio;
++ bool le_active_low;
++ int *gpios;
++};
++
++static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc)
++{
++ return container_of(gc, struct gpio_latch_chip, gc);
++}
++
++static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable)
++{
++ mutex_lock(&glc->mutex);
++
++ if (enable)
++ glc->latch_enabled = true;
++
++ if (glc->latch_enabled)
++ mutex_lock(&glc->latch_mutex);
++}
++
++static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable)
++{
++ if (glc->latch_enabled)
++ mutex_unlock(&glc->latch_mutex);
++
++ if (disable)
++ glc->latch_enabled = true;
++
++ mutex_unlock(&glc->mutex);
++}
++
++static int
++gpio_latch_get(struct gpio_chip *gc, unsigned offset)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ int ret;
++
++ gpio_latch_lock(glc, false);
++ ret = gpio_get_value(glc->gpios[offset]);
++ gpio_latch_unlock(glc, false);
++
++ return ret;
++}
++
++static void
++gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ bool enable_latch = false;
++ bool disable_latch = false;
++ int gpio;
++
++ gpio = glc->gpios[offset];
++
++ if (gpio == glc->le_gpio) {
++ enable_latch = value ^ glc->le_active_low;
++ disable_latch = !enable_latch;
++ }
++
++ gpio_latch_lock(glc, enable_latch);
++ gpio_set_value(gpio, value);
++ gpio_latch_unlock(glc, disable_latch);
++}
++
++static int
++gpio_latch_direction_input(struct gpio_chip *gc, unsigned offset)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ int ret;
++
++ gpio_latch_lock(glc, false);
++ ret = gpio_direction_input(glc->gpios[offset]);
++ gpio_latch_unlock(glc, false);
++
++ return ret;
++}
++
++static int
++gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ bool enable_latch = false;
++ bool disable_latch = false;
++ int gpio;
++ int ret;
++
++ gpio = glc->gpios[offset];
++
++ if (gpio == glc->le_gpio) {
++ enable_latch = value ^ glc->le_active_low;
++ disable_latch = !enable_latch;
++ }
++
++ gpio_latch_lock(glc, enable_latch);
++ ret = gpio_direction_output(gpio, value);
++ gpio_latch_unlock(glc, disable_latch);
++
++ return ret;
++}
++
++static int gpio_latch_probe(struct platform_device *pdev)
++{
++ struct gpio_latch_chip *glc;
++ struct gpio_latch_platform_data *pdata;
++ struct gpio_chip *gc;
++ int size;
++ int ret;
++ int i;
++
++ pdata = dev_get_platdata(&pdev->dev);
++ if (!pdata)
++ return -EINVAL;
++
++ if (pdata->le_gpio_index >= pdata->num_gpios ||
++ !pdata->num_gpios ||
++ !pdata->gpios)
++ return -EINVAL;
++
++ for (i = 0; i < pdata->num_gpios; i++) {
++ int gpio = pdata->gpios[i];
++
++ ret = devm_gpio_request(&pdev->dev, gpio,
++ GPIO_LATCH_DRIVER_NAME);
++ if (ret)
++ return ret;
++ }
++
++ glc = devm_kzalloc(&pdev->dev, sizeof(*glc), GFP_KERNEL);
++ if (!glc)
++ return -ENOMEM;
++
++ mutex_init(&glc->mutex);
++ mutex_init(&glc->latch_mutex);
++
++ size = pdata->num_gpios * sizeof(glc->gpios[0]);
++ glc->gpios = devm_kzalloc(&pdev->dev, size , GFP_KERNEL);
++ if (!glc->gpios)
++ return -ENOMEM;
++
++ memcpy(glc->gpios, pdata->gpios, size);
++
++ glc->le_gpio = glc->gpios[pdata->le_gpio_index];
++ glc->le_active_low = pdata->le_active_low;
++
++ gc = &glc->gc;
++
++ gc->label = GPIO_LATCH_DRIVER_NAME;
++ gc->base = pdata->base;
++ gc->can_sleep = true;
++ gc->ngpio = pdata->num_gpios;
++ gc->get = gpio_latch_get;
++ gc->set = gpio_latch_set;
++ gc->direction_input = gpio_latch_direction_input,
++ gc->direction_output = gpio_latch_direction_output;
++
++ platform_set_drvdata(pdev, glc);
++
++ ret = gpiochip_add(&glc->gc);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int gpio_latch_remove(struct platform_device *pdev)
++{
++ struct gpio_latch_chip *glc = platform_get_drvdata(pdev);
++
++ return gpiochip_remove(&glc->gc);;
++}
++
++
++static struct platform_driver gpio_latch_driver = {
++ .probe = gpio_latch_probe,
++ .remove = gpio_latch_remove,
++ .driver = {
++ .name = GPIO_LATCH_DRIVER_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init gpio_latch_init(void)
++{
++ return platform_driver_register(&gpio_latch_driver);
++}
++
++postcore_initcall(gpio_latch_init);
++
++MODULE_DESCRIPTION("GPIO latch driver");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME);
+diff --git a/include/linux/platform_data/gpio-latch.h b/include/linux/platform_data/gpio-latch.h
+new file mode 100644
+index 0000000..0450e67
+--- /dev/null
++++ b/include/linux/platform_data/gpio-latch.h
+@@ -0,0 +1,14 @@
++#ifndef _GPIO_LATCH_H_
++#define _GPIO_LATCH_H_
++
++#define GPIO_LATCH_DRIVER_NAME "gpio-latch"
++
++struct gpio_latch_platform_data {
++ int base;
++ int num_gpios;
++ int *gpios;
++ int le_gpio_index;
++ bool le_active_low;
++};
++
++#endif /* _GPIO_LATCH_H_ */
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0009-spi-export-spi_bitbang_bufs-function.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0009-spi-export-spi_bitbang_bufs-function.patch
new file mode 100644
index 000000000..dc6af0a9d
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0009-spi-export-spi_bitbang_bufs-function.patch
@@ -0,0 +1,45 @@
+From ff81dc67568d5393c30352c6075b43afc9de2329 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 00:22:55 +0200
+Subject: [PATCH] spi: export spi_bitbang_bufs function
+
+---
+ drivers/spi/spi-bitbang.c | 3 ++-
+ include/linux/spi/spi_bitbang.h | 1 +
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
+index bd222f6..2145d77 100644
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
+@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_device *spi)
+ }
+ EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
+
+-static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
++int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
+ {
+ struct spi_bitbang_cs *cs = spi->controller_state;
+ unsigned nsecs = cs->nsecs;
+
+ return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
+ }
++EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
+
+ /*----------------------------------------------------------------------*/
+
+diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
+index daebaba..1631d7a 100644
+--- a/include/linux/spi/spi_bitbang.h
++++ b/include/linux/spi/spi_bitbang.h
+@@ -39,6 +39,7 @@ extern int spi_bitbang_setup(struct spi_device *spi);
+ extern void spi_bitbang_cleanup(struct spi_device *spi);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t);
++extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
+
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0010-spi-add-type-field-to-spi_transfer-struct.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0010-spi-add-type-field-to-spi_transfer-struct.patch
new file mode 100644
index 000000000..2721d3c4e
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0010-spi-add-type-field-to-spi_transfer-struct.patch
@@ -0,0 +1,37 @@
+From eaf82ac5fc9272545d4d4fb4582eab69d37e389a Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 00:23:56 +0200
+Subject: [PATCH] spi: add type field to spi_transfer struct
+
+---
+ include/linux/spi/spi.h | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
+index 4ee1a02..a77d6c6 100644
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -475,6 +475,12 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
+
+ /*---------------------------------------------------------------------------*/
+
++enum spi_transfer_type {
++ SPI_TRANSFER_GENERIC = 0,
++ SPI_TRANSFER_FLASH_READ_CMD,
++ SPI_TRANSFER_FLASH_READ_DATA,
++};
++
+ /*
+ * I/O INTERFACE between SPI controller and protocol drivers
+ *
+@@ -591,6 +597,7 @@ struct spi_transfer {
+ u8 bits_per_word;
+ u16 delay_usecs;
+ u32 speed_hz;
++ enum spi_transfer_type type;
+
+ struct list_head transfer_list;
+ };
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0012-mips-ath79-swizzle-PCI-address-for-ar71xx.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0012-mips-ath79-swizzle-PCI-address-for-ar71xx.patch
new file mode 100644
index 000000000..c63489112
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0012-mips-ath79-swizzle-PCI-address-for-ar71xx.patch
@@ -0,0 +1,130 @@
+From 0c139cb15774f3c41a0cf6620727e676c874834a Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 00:28:24 +0200
+Subject: [PATCH] mips: ath79: swizzle PCI address for ar71xx
+
+---
+ arch/mips/ath79/pci.c | 42 ++++++++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/mangle-port.h | 37 +++++++++++++++++++++++
+ 2 files changed, 79 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ath79/mangle-port.h
+
+diff --git a/arch/mips/ath79/pci.c b/arch/mips/ath79/pci.c
+index 730c0b0..47be58c 100644
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -13,6 +13,7 @@
+ */
+
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/pci.h>
+ #include <linux/resource.h>
+ #include <linux/platform_device.h>
+@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
+
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+ {
+ .slot = 17,
+@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id,
+ return pdev;
+ }
+
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++ unsigned long phys = CPHYSADDR(port);
++
++ return (phys >= AR71XX_PCI_MEM_BASE &&
++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++ if (__ath79_pci_swizzle_b)
++ return __ath79_pci_swizzle_b(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++ if (__ath79_pci_swizzle_w)
++ return __ath79_pci_swizzle_w(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ int __init ath79_register_pci(void)
+ {
+ struct platform_device *pdev = NULL;
+
+ if (soc_is_ar71xx()) {
+ pdev = ath79_register_pci_ar71xx();
++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
+ } else if (soc_is_ar724x()) {
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
+diff --git a/arch/mips/include/asm/mach-ath79/mangle-port.h b/arch/mips/include/asm/mach-ath79/mangle-port.h
+new file mode 100644
+index 0000000..ffd4e20
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port) (port)
++#define __swizzle_addr_q(port) (port)
++
++# define ioswabb(a, x) (x)
++# define __mem_ioswabb(a, x) (x)
++# define ioswabw(a, x) (x)
++# define __mem_ioswabw(a, x) cpu_to_le16(x)
++# define ioswabl(a, x) (x)
++# define __mem_ioswabl(a, x) cpu_to_le32(x)
++# define ioswabq(a, x) (x)
++# define __mem_ioswabq(a, x) cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0013-net-add-swconfig-support.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0013-net-add-swconfig-support.patch
new file mode 100644
index 000000000..8071ffc7c
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0013-net-add-swconfig-support.patch
@@ -0,0 +1,1837 @@
+diff -Nur linux-4.1.6.orig/drivers/net/phy/Kconfig linux-4.1.6/drivers/net/phy/Kconfig
+--- linux-4.1.6.orig/drivers/net/phy/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/phy/Kconfig 2015-09-13 20:15:06.381308993 +0200
+@@ -12,6 +12,16 @@
+
+ if PHYLIB
+
++config SWCONFIG
++ tristate "Switch configuration API"
++ ---help---
++ Switch configuration API using netlink. This allows
++ you to configure the VLAN features of certain switches.
++
++config SWCONFIG_LEDS
++ bool "Switch LED trigger support"
++ depends on (SWCONFIG && LEDS_TRIGGERS)
++
+ comment "MII PHY device drivers"
+
+ config AT803X_PHY
+diff -Nur linux-4.1.6.orig/drivers/net/phy/Makefile linux-4.1.6/drivers/net/phy/Makefile
+--- linux-4.1.6.orig/drivers/net/phy/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/phy/Makefile 2015-09-13 20:15:06.381308993 +0200
+@@ -3,6 +3,7 @@
+ libphy-objs := phy.o phy_device.o mdio_bus.o
+
+ obj-$(CONFIG_PHYLIB) += libphy.o
++obj-$(CONFIG_SWCONFIG) += swconfig.o
+ obj-$(CONFIG_MARVELL_PHY) += marvell.o
+ obj-$(CONFIG_DAVICOM_PHY) += davicom.o
+ obj-$(CONFIG_CICADA_PHY) += cicada.o
+diff -Nur linux-4.1.6.orig/drivers/net/phy/swconfig.c linux-4.1.6/drivers/net/phy/swconfig.c
+--- linux-4.1.6.orig/drivers/net/phy/swconfig.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/swconfig.c 2015-09-13 20:14:58.973675262 +0200
+@@ -0,0 +1,1153 @@
++/*
++ * swconfig.c: Switch configuration API
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/if.h>
++#include <linux/if_ether.h>
++#include <linux/capability.h>
++#include <linux/skbuff.h>
++#include <linux/switch.h>
++#include <linux/of.h>
++#include <linux/version.h>
++
++#define SWCONFIG_DEVNAME "switch%d"
++
++#include "swconfig_leds.c"
++
++MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
++MODULE_LICENSE("GPL");
++
++static int swdev_id;
++static struct list_head swdevs;
++static DEFINE_SPINLOCK(swdevs_lock);
++struct swconfig_callback;
++
++struct swconfig_callback {
++ struct sk_buff *msg;
++ struct genlmsghdr *hdr;
++ struct genl_info *info;
++ int cmd;
++
++ /* callback for filling in the message data */
++ int (*fill)(struct swconfig_callback *cb, void *arg);
++
++ /* callback for closing the message before sending it */
++ int (*close)(struct swconfig_callback *cb, void *arg);
++
++ struct nlattr *nest[4];
++ int args[4];
++};
++
++/* defaults */
++
++static int
++swconfig_get_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ int ret;
++ if (val->port_vlan >= dev->vlans)
++ return -EINVAL;
++
++ if (!dev->ops->get_vlan_ports)
++ return -EOPNOTSUPP;
++
++ ret = dev->ops->get_vlan_ports(dev, val);
++ return ret;
++}
++
++static int
++swconfig_set_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct switch_port *ports = val->value.ports;
++ const struct switch_dev_ops *ops = dev->ops;
++ int i;
++
++ if (val->port_vlan >= dev->vlans)
++ return -EINVAL;
++
++ /* validate ports */
++ if (val->len > dev->ports)
++ return -EINVAL;
++
++ if (!ops->set_vlan_ports)
++ return -EOPNOTSUPP;
++
++ for (i = 0; i < val->len; i++) {
++ if (ports[i].id >= dev->ports)
++ return -EINVAL;
++
++ if (ops->set_port_pvid &&
++ !(ports[i].flags & (1 << SWITCH_PORT_FLAG_TAGGED)))
++ ops->set_port_pvid(dev, ports[i].id, val->port_vlan);
++ }
++
++ return ops->set_vlan_ports(dev, val);
++}
++
++static int
++swconfig_set_pvid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ if (val->port_vlan >= dev->ports)
++ return -EINVAL;
++
++ if (!dev->ops->set_port_pvid)
++ return -EOPNOTSUPP;
++
++ return dev->ops->set_port_pvid(dev, val->port_vlan, val->value.i);
++}
++
++static int
++swconfig_get_pvid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ if (val->port_vlan >= dev->ports)
++ return -EINVAL;
++
++ if (!dev->ops->get_port_pvid)
++ return -EOPNOTSUPP;
++
++ return dev->ops->get_port_pvid(dev, val->port_vlan, &val->value.i);
++}
++
++static const char *
++swconfig_speed_str(enum switch_port_speed speed)
++{
++ switch (speed) {
++ case SWITCH_PORT_SPEED_10:
++ return "10baseT";
++ case SWITCH_PORT_SPEED_100:
++ return "100baseT";
++ case SWITCH_PORT_SPEED_1000:
++ return "1000baseT";
++ default:
++ break;
++ }
++
++ return "unknown";
++}
++
++static int
++swconfig_get_link(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct switch_port_link link;
++ int len;
++ int ret;
++
++ if (val->port_vlan >= dev->ports)
++ return -EINVAL;
++
++ if (!dev->ops->get_port_link)
++ return -EOPNOTSUPP;
++
++ memset(&link, 0, sizeof(link));
++ ret = dev->ops->get_port_link(dev, val->port_vlan, &link);
++ if (ret)
++ return ret;
++
++ memset(dev->buf, 0, sizeof(dev->buf));
++
++ if (link.link)
++ len = snprintf(dev->buf, sizeof(dev->buf),
++ "port:%d link:up speed:%s %s-duplex %s%s%s%s%s",
++ val->port_vlan,
++ swconfig_speed_str(link.speed),
++ link.duplex ? "full" : "half",
++ link.tx_flow ? "txflow " : "",
++ link.rx_flow ? "rxflow " : "",
++ link.eee & ADVERTISED_100baseT_Full ? "eee100 " : "",
++ link.eee & ADVERTISED_1000baseT_Full ? "eee1000 " : "",
++ link.aneg ? "auto" : "");
++ else
++ len = snprintf(dev->buf, sizeof(dev->buf), "port:%d link:down",
++ val->port_vlan);
++
++ val->value.s = dev->buf;
++ val->len = len;
++
++ return 0;
++}
++
++static int
++swconfig_apply_config(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ /* don't complain if not supported by the switch driver */
++ if (!dev->ops->apply_config)
++ return 0;
++
++ return dev->ops->apply_config(dev);
++}
++
++static int
++swconfig_reset_switch(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ /* don't complain if not supported by the switch driver */
++ if (!dev->ops->reset_switch)
++ return 0;
++
++ return dev->ops->reset_switch(dev);
++}
++
++enum global_defaults {
++ GLOBAL_APPLY,
++ GLOBAL_RESET,
++};
++
++enum vlan_defaults {
++ VLAN_PORTS,
++};
++
++enum port_defaults {
++ PORT_PVID,
++ PORT_LINK,
++};
++
++static struct switch_attr default_global[] = {
++ [GLOBAL_APPLY] = {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "apply",
++ .description = "Activate changes in the hardware",
++ .set = swconfig_apply_config,
++ },
++ [GLOBAL_RESET] = {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "reset",
++ .description = "Reset the switch",
++ .set = swconfig_reset_switch,
++ }
++};
++
++static struct switch_attr default_port[] = {
++ [PORT_PVID] = {
++ .type = SWITCH_TYPE_INT,
++ .name = "pvid",
++ .description = "Primary VLAN ID",
++ .set = swconfig_set_pvid,
++ .get = swconfig_get_pvid,
++ },
++ [PORT_LINK] = {
++ .type = SWITCH_TYPE_STRING,
++ .name = "link",
++ .description = "Get port link information",
++ .set = NULL,
++ .get = swconfig_get_link,
++ }
++};
++
++static struct switch_attr default_vlan[] = {
++ [VLAN_PORTS] = {
++ .type = SWITCH_TYPE_PORTS,
++ .name = "ports",
++ .description = "VLAN port mapping",
++ .set = swconfig_set_vlan_ports,
++ .get = swconfig_get_vlan_ports,
++ },
++};
++
++static const struct switch_attr *
++swconfig_find_attr_by_name(const struct switch_attrlist *alist,
++ const char *name)
++{
++ int i;
++
++ for (i = 0; i < alist->n_attr; i++)
++ if (strcmp(name, alist->attr[i].name) == 0)
++ return &alist->attr[i];
++
++ return NULL;
++}
++
++static void swconfig_defaults_init(struct switch_dev *dev)
++{
++ const struct switch_dev_ops *ops = dev->ops;
++
++ dev->def_global = 0;
++ dev->def_vlan = 0;
++ dev->def_port = 0;
++
++ if (ops->get_vlan_ports || ops->set_vlan_ports)
++ set_bit(VLAN_PORTS, &dev->def_vlan);
++
++ if (ops->get_port_pvid || ops->set_port_pvid)
++ set_bit(PORT_PVID, &dev->def_port);
++
++ if (ops->get_port_link &&
++ !swconfig_find_attr_by_name(&ops->attr_port, "link"))
++ set_bit(PORT_LINK, &dev->def_port);
++
++ /* always present, can be no-op */
++ set_bit(GLOBAL_APPLY, &dev->def_global);
++ set_bit(GLOBAL_RESET, &dev->def_global);
++}
++
++
++static struct genl_family switch_fam = {
++ .id = GENL_ID_GENERATE,
++ .name = "switch",
++ .hdrsize = 0,
++ .version = 1,
++ .maxattr = SWITCH_ATTR_MAX,
++};
++
++static const struct nla_policy switch_policy[SWITCH_ATTR_MAX+1] = {
++ [SWITCH_ATTR_ID] = { .type = NLA_U32 },
++ [SWITCH_ATTR_OP_ID] = { .type = NLA_U32 },
++ [SWITCH_ATTR_OP_PORT] = { .type = NLA_U32 },
++ [SWITCH_ATTR_OP_VLAN] = { .type = NLA_U32 },
++ [SWITCH_ATTR_OP_VALUE_INT] = { .type = NLA_U32 },
++ [SWITCH_ATTR_OP_VALUE_STR] = { .type = NLA_NUL_STRING },
++ [SWITCH_ATTR_OP_VALUE_PORTS] = { .type = NLA_NESTED },
++ [SWITCH_ATTR_TYPE] = { .type = NLA_U32 },
++};
++
++static const struct nla_policy port_policy[SWITCH_PORT_ATTR_MAX+1] = {
++ [SWITCH_PORT_ID] = { .type = NLA_U32 },
++ [SWITCH_PORT_FLAG_TAGGED] = { .type = NLA_FLAG },
++};
++
++static inline void
++swconfig_lock(void)
++{
++ spin_lock(&swdevs_lock);
++}
++
++static inline void
++swconfig_unlock(void)
++{
++ spin_unlock(&swdevs_lock);
++}
++
++static struct switch_dev *
++swconfig_get_dev(struct genl_info *info)
++{
++ struct switch_dev *dev = NULL;
++ struct switch_dev *p;
++ int id;
++
++ if (!info->attrs[SWITCH_ATTR_ID])
++ goto done;
++
++ id = nla_get_u32(info->attrs[SWITCH_ATTR_ID]);
++ swconfig_lock();
++ list_for_each_entry(p, &swdevs, dev_list) {
++ if (id != p->id)
++ continue;
++
++ dev = p;
++ break;
++ }
++ if (dev)
++ mutex_lock(&dev->sw_mutex);
++ else
++ pr_debug("device %d not found\n", id);
++ swconfig_unlock();
++done:
++ return dev;
++}
++
++static inline void
++swconfig_put_dev(struct switch_dev *dev)
++{
++ mutex_unlock(&dev->sw_mutex);
++}
++
++static int
++swconfig_dump_attr(struct swconfig_callback *cb, void *arg)
++{
++ struct switch_attr *op = arg;
++ struct genl_info *info = cb->info;
++ struct sk_buff *msg = cb->msg;
++ int id = cb->args[0];
++ void *hdr;
++
++ hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, &switch_fam,
++ NLM_F_MULTI, SWITCH_CMD_NEW_ATTR);
++ if (IS_ERR(hdr))
++ return -1;
++
++ if (nla_put_u32(msg, SWITCH_ATTR_OP_ID, id))
++ goto nla_put_failure;
++ if (nla_put_u32(msg, SWITCH_ATTR_OP_TYPE, op->type))
++ goto nla_put_failure;
++ if (nla_put_string(msg, SWITCH_ATTR_OP_NAME, op->name))
++ goto nla_put_failure;
++ if (op->description)
++ if (nla_put_string(msg, SWITCH_ATTR_OP_DESCRIPTION,
++ op->description))
++ goto nla_put_failure;
++
++ genlmsg_end(msg, hdr);
++ return msg->len;
++nla_put_failure:
++ genlmsg_cancel(msg, hdr);
++ return -EMSGSIZE;
++}
++
++/* spread multipart messages across multiple message buffers */
++static int
++swconfig_send_multipart(struct swconfig_callback *cb, void *arg)
++{
++ struct genl_info *info = cb->info;
++ int restart = 0;
++ int err;
++
++ do {
++ if (!cb->msg) {
++ cb->msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
++ if (cb->msg == NULL)
++ goto error;
++ }
++
++ if (!(cb->fill(cb, arg) < 0))
++ break;
++
++ /* fill failed, check if this was already the second attempt */
++ if (restart)
++ goto error;
++
++ /* try again in a new message, send the current one */
++ restart = 1;
++ if (cb->close) {
++ if (cb->close(cb, arg) < 0)
++ goto error;
++ }
++ err = genlmsg_reply(cb->msg, info);
++ cb->msg = NULL;
++ if (err < 0)
++ goto error;
++
++ } while (restart);
++
++ return 0;
++
++error:
++ if (cb->msg)
++ nlmsg_free(cb->msg);
++ return -1;
++}
++
++static int
++swconfig_list_attrs(struct sk_buff *skb, struct genl_info *info)
++{
++ struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
++ const struct switch_attrlist *alist;
++ struct switch_dev *dev;
++ struct swconfig_callback cb;
++ int err = -EINVAL;
++ int i;
++
++ /* defaults */
++ struct switch_attr *def_list;
++ unsigned long *def_active;
++ int n_def;
++
++ dev = swconfig_get_dev(info);
++ if (!dev)
++ return -EINVAL;
++
++ switch (hdr->cmd) {
++ case SWITCH_CMD_LIST_GLOBAL:
++ alist = &dev->ops->attr_global;
++ def_list = default_global;
++ def_active = &dev->def_global;
++ n_def = ARRAY_SIZE(default_global);
++ break;
++ case SWITCH_CMD_LIST_VLAN:
++ alist = &dev->ops->attr_vlan;
++ def_list = default_vlan;
++ def_active = &dev->def_vlan;
++ n_def = ARRAY_SIZE(default_vlan);
++ break;
++ case SWITCH_CMD_LIST_PORT:
++ alist = &dev->ops->attr_port;
++ def_list = default_port;
++ def_active = &dev->def_port;
++ n_def = ARRAY_SIZE(default_port);
++ break;
++ default:
++ WARN_ON(1);
++ goto out;
++ }
++
++ memset(&cb, 0, sizeof(cb));
++ cb.info = info;
++ cb.fill = swconfig_dump_attr;
++ for (i = 0; i < alist->n_attr; i++) {
++ if (alist->attr[i].disabled)
++ continue;
++ cb.args[0] = i;
++ err = swconfig_send_multipart(&cb, (void *) &alist->attr[i]);
++ if (err < 0)
++ goto error;
++ }
++
++ /* defaults */
++ for (i = 0; i < n_def; i++) {
++ if (!test_bit(i, def_active))
++ continue;
++ cb.args[0] = SWITCH_ATTR_DEFAULTS_OFFSET + i;
++ err = swconfig_send_multipart(&cb, (void *) &def_list[i]);
++ if (err < 0)
++ goto error;
++ }
++ swconfig_put_dev(dev);
++
++ if (!cb.msg)
++ return 0;
++
++ return genlmsg_reply(cb.msg, info);
++
++error:
++ if (cb.msg)
++ nlmsg_free(cb.msg);
++out:
++ swconfig_put_dev(dev);
++ return err;
++}
++
++static const struct switch_attr *
++swconfig_lookup_attr(struct switch_dev *dev, struct genl_info *info,
++ struct switch_val *val)
++{
++ struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
++ const struct switch_attrlist *alist;
++ const struct switch_attr *attr = NULL;
++ int attr_id;
++
++ /* defaults */
++ struct switch_attr *def_list;
++ unsigned long *def_active;
++ int n_def;
++
++ if (!info->attrs[SWITCH_ATTR_OP_ID])
++ goto done;
++
++ switch (hdr->cmd) {
++ case SWITCH_CMD_SET_GLOBAL:
++ case SWITCH_CMD_GET_GLOBAL:
++ alist = &dev->ops->attr_global;
++ def_list = default_global;
++ def_active = &dev->def_global;
++ n_def = ARRAY_SIZE(default_global);
++ break;
++ case SWITCH_CMD_SET_VLAN:
++ case SWITCH_CMD_GET_VLAN:
++ alist = &dev->ops->attr_vlan;
++ def_list = default_vlan;
++ def_active = &dev->def_vlan;
++ n_def = ARRAY_SIZE(default_vlan);
++ if (!info->attrs[SWITCH_ATTR_OP_VLAN])
++ goto done;
++ val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_VLAN]);
++ if (val->port_vlan >= dev->vlans)
++ goto done;
++ break;
++ case SWITCH_CMD_SET_PORT:
++ case SWITCH_CMD_GET_PORT:
++ alist = &dev->ops->attr_port;
++ def_list = default_port;
++ def_active = &dev->def_port;
++ n_def = ARRAY_SIZE(default_port);
++ if (!info->attrs[SWITCH_ATTR_OP_PORT])
++ goto done;
++ val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_PORT]);
++ if (val->port_vlan >= dev->ports)
++ goto done;
++ break;
++ default:
++ WARN_ON(1);
++ goto done;
++ }
++
++ if (!alist)
++ goto done;
++
++ attr_id = nla_get_u32(info->attrs[SWITCH_ATTR_OP_ID]);
++ if (attr_id >= SWITCH_ATTR_DEFAULTS_OFFSET) {
++ attr_id -= SWITCH_ATTR_DEFAULTS_OFFSET;
++ if (attr_id >= n_def)
++ goto done;
++ if (!test_bit(attr_id, def_active))
++ goto done;
++ attr = &def_list[attr_id];
++ } else {
++ if (attr_id >= alist->n_attr)
++ goto done;
++ attr = &alist->attr[attr_id];
++ }
++
++ if (attr->disabled)
++ attr = NULL;
++
++done:
++ if (!attr)
++ pr_debug("attribute lookup failed\n");
++ val->attr = attr;
++ return attr;
++}
++
++static int
++swconfig_parse_ports(struct sk_buff *msg, struct nlattr *head,
++ struct switch_val *val, int max)
++{
++ struct nlattr *nla;
++ int rem;
++
++ val->len = 0;
++ nla_for_each_nested(nla, head, rem) {
++ struct nlattr *tb[SWITCH_PORT_ATTR_MAX+1];
++ struct switch_port *port = &val->value.ports[val->len];
++
++ if (val->len >= max)
++ return -EINVAL;
++
++ if (nla_parse_nested(tb, SWITCH_PORT_ATTR_MAX, nla,
++ port_policy))
++ return -EINVAL;
++
++ if (!tb[SWITCH_PORT_ID])
++ return -EINVAL;
++
++ port->id = nla_get_u32(tb[SWITCH_PORT_ID]);
++ if (tb[SWITCH_PORT_FLAG_TAGGED])
++ port->flags |= (1 << SWITCH_PORT_FLAG_TAGGED);
++ val->len++;
++ }
++
++ return 0;
++}
++
++static int
++swconfig_set_attr(struct sk_buff *skb, struct genl_info *info)
++{
++ const struct switch_attr *attr;
++ struct switch_dev *dev;
++ struct switch_val val;
++ int err = -EINVAL;
++
++ dev = swconfig_get_dev(info);
++ if (!dev)
++ return -EINVAL;
++
++ memset(&val, 0, sizeof(val));
++ attr = swconfig_lookup_attr(dev, info, &val);
++ if (!attr || !attr->set)
++ goto error;
++
++ val.attr = attr;
++ switch (attr->type) {
++ case SWITCH_TYPE_NOVAL:
++ break;
++ case SWITCH_TYPE_INT:
++ if (!info->attrs[SWITCH_ATTR_OP_VALUE_INT])
++ goto error;
++ val.value.i =
++ nla_get_u32(info->attrs[SWITCH_ATTR_OP_VALUE_INT]);
++ break;
++ case SWITCH_TYPE_STRING:
++ if (!info->attrs[SWITCH_ATTR_OP_VALUE_STR])
++ goto error;
++ val.value.s =
++ nla_data(info->attrs[SWITCH_ATTR_OP_VALUE_STR]);
++ break;
++ case SWITCH_TYPE_PORTS:
++ val.value.ports = dev->portbuf;
++ memset(dev->portbuf, 0,
++ sizeof(struct switch_port) * dev->ports);
++
++ /* TODO: implement multipart? */
++ if (info->attrs[SWITCH_ATTR_OP_VALUE_PORTS]) {
++ err = swconfig_parse_ports(skb,
++ info->attrs[SWITCH_ATTR_OP_VALUE_PORTS],
++ &val, dev->ports);
++ if (err < 0)
++ goto error;
++ } else {
++ val.len = 0;
++ err = 0;
++ }
++ break;
++ default:
++ goto error;
++ }
++
++ err = attr->set(dev, attr, &val);
++error:
++ swconfig_put_dev(dev);
++ return err;
++}
++
++static int
++swconfig_close_portlist(struct swconfig_callback *cb, void *arg)
++{
++ if (cb->nest[0])
++ nla_nest_end(cb->msg, cb->nest[0]);
++ return 0;
++}
++
++static int
++swconfig_send_port(struct swconfig_callback *cb, void *arg)
++{
++ const struct switch_port *port = arg;
++ struct nlattr *p = NULL;
++
++ if (!cb->nest[0]) {
++ cb->nest[0] = nla_nest_start(cb->msg, cb->cmd);
++ if (!cb->nest[0])
++ return -1;
++ }
++
++ p = nla_nest_start(cb->msg, SWITCH_ATTR_PORT);
++ if (!p)
++ goto error;
++
++ if (nla_put_u32(cb->msg, SWITCH_PORT_ID, port->id))
++ goto nla_put_failure;
++ if (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
++ if (nla_put_flag(cb->msg, SWITCH_PORT_FLAG_TAGGED))
++ goto nla_put_failure;
++ }
++
++ nla_nest_end(cb->msg, p);
++ return 0;
++
++nla_put_failure:
++ nla_nest_cancel(cb->msg, p);
++error:
++ nla_nest_cancel(cb->msg, cb->nest[0]);
++ return -1;
++}
++
++static int
++swconfig_send_ports(struct sk_buff **msg, struct genl_info *info, int attr,
++ const struct switch_val *val)
++{
++ struct swconfig_callback cb;
++ int err = 0;
++ int i;
++
++ if (!val->value.ports)
++ return -EINVAL;
++
++ memset(&cb, 0, sizeof(cb));
++ cb.cmd = attr;
++ cb.msg = *msg;
++ cb.info = info;
++ cb.fill = swconfig_send_port;
++ cb.close = swconfig_close_portlist;
++
++ cb.nest[0] = nla_nest_start(cb.msg, cb.cmd);
++ for (i = 0; i < val->len; i++) {
++ err = swconfig_send_multipart(&cb, &val->value.ports[i]);
++ if (err)
++ goto done;
++ }
++ err = val->len;
++ swconfig_close_portlist(&cb, NULL);
++ *msg = cb.msg;
++
++done:
++ return err;
++}
++
++static int
++swconfig_get_attr(struct sk_buff *skb, struct genl_info *info)
++{
++ struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
++ const struct switch_attr *attr;
++ struct switch_dev *dev;
++ struct sk_buff *msg = NULL;
++ struct switch_val val;
++ int err = -EINVAL;
++ int cmd = hdr->cmd;
++
++ dev = swconfig_get_dev(info);
++ if (!dev)
++ return -EINVAL;
++
++ memset(&val, 0, sizeof(val));
++ attr = swconfig_lookup_attr(dev, info, &val);
++ if (!attr || !attr->get)
++ goto error;
++
++ if (attr->type == SWITCH_TYPE_PORTS) {
++ val.value.ports = dev->portbuf;
++ memset(dev->portbuf, 0,
++ sizeof(struct switch_port) * dev->ports);
++ }
++
++ err = attr->get(dev, attr, &val);
++ if (err)
++ goto error;
++
++ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
++ if (!msg)
++ goto error;
++
++ hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, &switch_fam,
++ 0, cmd);
++ if (IS_ERR(hdr))
++ goto nla_put_failure;
++
++ switch (attr->type) {
++ case SWITCH_TYPE_INT:
++ if (nla_put_u32(msg, SWITCH_ATTR_OP_VALUE_INT, val.value.i))
++ goto nla_put_failure;
++ break;
++ case SWITCH_TYPE_STRING:
++ if (nla_put_string(msg, SWITCH_ATTR_OP_VALUE_STR, val.value.s))
++ goto nla_put_failure;
++ break;
++ case SWITCH_TYPE_PORTS:
++ err = swconfig_send_ports(&msg, info,
++ SWITCH_ATTR_OP_VALUE_PORTS, &val);
++ if (err < 0)
++ goto nla_put_failure;
++ break;
++ default:
++ pr_debug("invalid type in attribute\n");
++ err = -EINVAL;
++ goto error;
++ }
++ genlmsg_end(msg, hdr);
++ err = msg->len;
++ if (err < 0)
++ goto nla_put_failure;
++
++ swconfig_put_dev(dev);
++ return genlmsg_reply(msg, info);
++
++nla_put_failure:
++ if (msg)
++ nlmsg_free(msg);
++error:
++ swconfig_put_dev(dev);
++ if (!err)
++ err = -ENOMEM;
++ return err;
++}
++
++static int
++swconfig_send_switch(struct sk_buff *msg, u32 pid, u32 seq, int flags,
++ const struct switch_dev *dev)
++{
++ struct nlattr *p = NULL, *m = NULL;
++ void *hdr;
++ int i;
++
++ hdr = genlmsg_put(msg, pid, seq, &switch_fam, flags,
++ SWITCH_CMD_NEW_ATTR);
++ if (IS_ERR(hdr))
++ return -1;
++
++ if (nla_put_u32(msg, SWITCH_ATTR_ID, dev->id))
++ goto nla_put_failure;
++ if (nla_put_string(msg, SWITCH_ATTR_DEV_NAME, dev->devname))
++ goto nla_put_failure;
++ if (nla_put_string(msg, SWITCH_ATTR_ALIAS, dev->alias))
++ goto nla_put_failure;
++ if (nla_put_string(msg, SWITCH_ATTR_NAME, dev->name))
++ goto nla_put_failure;
++ if (nla_put_u32(msg, SWITCH_ATTR_VLANS, dev->vlans))
++ goto nla_put_failure;
++ if (nla_put_u32(msg, SWITCH_ATTR_PORTS, dev->ports))
++ goto nla_put_failure;
++ if (nla_put_u32(msg, SWITCH_ATTR_CPU_PORT, dev->cpu_port))
++ goto nla_put_failure;
++
++ m = nla_nest_start(msg, SWITCH_ATTR_PORTMAP);
++ if (!m)
++ goto nla_put_failure;
++ for (i = 0; i < dev->ports; i++) {
++ p = nla_nest_start(msg, SWITCH_ATTR_PORTS);
++ if (!p)
++ continue;
++ if (dev->portmap[i].s) {
++ if (nla_put_string(msg, SWITCH_PORTMAP_SEGMENT,
++ dev->portmap[i].s))
++ goto nla_put_failure;
++ if (nla_put_u32(msg, SWITCH_PORTMAP_VIRT,
++ dev->portmap[i].virt))
++ goto nla_put_failure;
++ }
++ nla_nest_end(msg, p);
++ }
++ nla_nest_end(msg, m);
++ genlmsg_end(msg, hdr);
++ return msg->len;
++nla_put_failure:
++ genlmsg_cancel(msg, hdr);
++ return -EMSGSIZE;
++}
++
++static int swconfig_dump_switches(struct sk_buff *skb,
++ struct netlink_callback *cb)
++{
++ struct switch_dev *dev;
++ int start = cb->args[0];
++ int idx = 0;
++
++ swconfig_lock();
++ list_for_each_entry(dev, &swdevs, dev_list) {
++ if (++idx <= start)
++ continue;
++ if (swconfig_send_switch(skb, NETLINK_CB(cb->skb).portid,
++ cb->nlh->nlmsg_seq, NLM_F_MULTI,
++ dev) < 0)
++ break;
++ }
++ swconfig_unlock();
++ cb->args[0] = idx;
++
++ return skb->len;
++}
++
++static int
++swconfig_done(struct netlink_callback *cb)
++{
++ return 0;
++}
++
++static struct genl_ops swconfig_ops[] = {
++ {
++ .cmd = SWITCH_CMD_LIST_GLOBAL,
++ .doit = swconfig_list_attrs,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_LIST_VLAN,
++ .doit = swconfig_list_attrs,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_LIST_PORT,
++ .doit = swconfig_list_attrs,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_GET_GLOBAL,
++ .doit = swconfig_get_attr,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_GET_VLAN,
++ .doit = swconfig_get_attr,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_GET_PORT,
++ .doit = swconfig_get_attr,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_SET_GLOBAL,
++ .doit = swconfig_set_attr,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_SET_VLAN,
++ .doit = swconfig_set_attr,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_SET_PORT,
++ .doit = swconfig_set_attr,
++ .policy = switch_policy,
++ },
++ {
++ .cmd = SWITCH_CMD_GET_SWITCH,
++ .dumpit = swconfig_dump_switches,
++ .policy = switch_policy,
++ .done = swconfig_done,
++ }
++};
++
++#ifdef CONFIG_OF
++void
++of_switch_load_portmap(struct switch_dev *dev)
++{
++ struct device_node *port;
++
++ if (!dev->of_node)
++ return;
++
++ for_each_child_of_node(dev->of_node, port) {
++ const __be32 *prop;
++ const char *segment;
++ int size, phys;
++
++ if (!of_device_is_compatible(port, "swconfig,port"))
++ continue;
++
++ if (of_property_read_string(port, "swconfig,segment", &segment))
++ continue;
++
++ prop = of_get_property(port, "swconfig,portmap", &size);
++ if (!prop)
++ continue;
++
++ if (size != (2 * sizeof(*prop))) {
++ pr_err("%s: failed to parse port mapping\n",
++ port->name);
++ continue;
++ }
++
++ phys = be32_to_cpup(prop++);
++ if ((phys < 0) | (phys >= dev->ports)) {
++ pr_err("%s: physical port index out of range\n",
++ port->name);
++ continue;
++ }
++
++ dev->portmap[phys].s = kstrdup(segment, GFP_KERNEL);
++ dev->portmap[phys].virt = be32_to_cpup(prop);
++ pr_debug("Found port: %s, physical: %d, virtual: %d\n",
++ segment, phys, dev->portmap[phys].virt);
++ }
++}
++#endif
++
++int
++register_switch(struct switch_dev *dev, struct net_device *netdev)
++{
++ struct switch_dev *sdev;
++ const int max_switches = 8 * sizeof(unsigned long);
++ unsigned long in_use = 0;
++ int err;
++ int i;
++
++ INIT_LIST_HEAD(&dev->dev_list);
++ if (netdev) {
++ dev->netdev = netdev;
++ if (!dev->alias)
++ dev->alias = netdev->name;
++ }
++ BUG_ON(!dev->alias);
++
++ if (dev->ports > 0) {
++ dev->portbuf = kzalloc(sizeof(struct switch_port) *
++ dev->ports, GFP_KERNEL);
++ if (!dev->portbuf)
++ return -ENOMEM;
++ dev->portmap = kzalloc(sizeof(struct switch_portmap) *
++ dev->ports, GFP_KERNEL);
++ if (!dev->portmap) {
++ kfree(dev->portbuf);
++ return -ENOMEM;
++ }
++ }
++ swconfig_defaults_init(dev);
++ mutex_init(&dev->sw_mutex);
++ swconfig_lock();
++ dev->id = ++swdev_id;
++
++ list_for_each_entry(sdev, &swdevs, dev_list) {
++ if (!sscanf(sdev->devname, SWCONFIG_DEVNAME, &i))
++ continue;
++ if (i < 0 || i > max_switches)
++ continue;
++
++ set_bit(i, &in_use);
++ }
++ i = find_first_zero_bit(&in_use, max_switches);
++
++ if (i == max_switches) {
++ swconfig_unlock();
++ return -ENFILE;
++ }
++
++#ifdef CONFIG_OF
++ if (dev->ports)
++ of_switch_load_portmap(dev);
++#endif
++
++ /* fill device name */
++ snprintf(dev->devname, IFNAMSIZ, SWCONFIG_DEVNAME, i);
++
++ list_add_tail(&dev->dev_list, &swdevs);
++ swconfig_unlock();
++
++ err = swconfig_create_led_trigger(dev);
++ if (err)
++ return err;
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(register_switch);
++
++void
++unregister_switch(struct switch_dev *dev)
++{
++ swconfig_destroy_led_trigger(dev);
++ kfree(dev->portbuf);
++ mutex_lock(&dev->sw_mutex);
++ swconfig_lock();
++ list_del(&dev->dev_list);
++ swconfig_unlock();
++ mutex_unlock(&dev->sw_mutex);
++}
++EXPORT_SYMBOL_GPL(unregister_switch);
++
++
++static int __init
++swconfig_init(void)
++{
++ int err;
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,13,0))
++ int i;
++#endif
++
++ INIT_LIST_HEAD(&swdevs);
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,13,0))
++ err = genl_register_family(&switch_fam);
++ if (err)
++ return err;
++
++ for (i = 0; i < ARRAY_SIZE(swconfig_ops); i++) {
++ err = genl_register_ops(&switch_fam, &swconfig_ops[i]);
++ if (err)
++ goto unregister;
++ }
++ return 0;
++
++unregister:
++ genl_unregister_family(&switch_fam);
++ return err;
++#else
++ err = genl_register_family_with_ops(&switch_fam, swconfig_ops);
++ if (err)
++ return err;
++ return 0;
++#endif
++}
++
++static void __exit
++swconfig_exit(void)
++{
++ genl_unregister_family(&switch_fam);
++}
++
++module_init(swconfig_init);
++module_exit(swconfig_exit);
++
+diff -Nur linux-4.1.6.orig/drivers/net/phy/swconfig_leds.c linux-4.1.6/drivers/net/phy/swconfig_leds.c
+--- linux-4.1.6.orig/drivers/net/phy/swconfig_leds.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/swconfig_leds.c 2015-09-13 20:14:58.973675262 +0200
+@@ -0,0 +1,354 @@
++/*
++ * swconfig_led.c: LED trigger support for the switch configuration API
++ *
++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ */
++
++#ifdef CONFIG_SWCONFIG_LEDS
++
++#include <linux/leds.h>
++#include <linux/ctype.h>
++#include <linux/device.h>
++#include <linux/workqueue.h>
++
++#define SWCONFIG_LED_TIMER_INTERVAL (HZ / 10)
++#define SWCONFIG_LED_NUM_PORTS 32
++
++struct switch_led_trigger {
++ struct led_trigger trig;
++ struct switch_dev *swdev;
++
++ struct delayed_work sw_led_work;
++ u32 port_mask;
++ u32 port_link;
++ unsigned long port_traffic[SWCONFIG_LED_NUM_PORTS];
++};
++
++struct swconfig_trig_data {
++ struct led_classdev *led_cdev;
++ struct switch_dev *swdev;
++
++ rwlock_t lock;
++ u32 port_mask;
++
++ bool prev_link;
++ unsigned long prev_traffic;
++ enum led_brightness prev_brightness;
++};
++
++static void
++swconfig_trig_set_brightness(struct swconfig_trig_data *trig_data,
++ enum led_brightness brightness)
++{
++ led_set_brightness(trig_data->led_cdev, brightness);
++ trig_data->prev_brightness = brightness;
++}
++
++static void
++swconfig_trig_update_port_mask(struct led_trigger *trigger)
++{
++ struct list_head *entry;
++ struct switch_led_trigger *sw_trig;
++ u32 port_mask;
++
++ if (!trigger)
++ return;
++
++ sw_trig = (void *) trigger;
++
++ port_mask = 0;
++ read_lock(&trigger->leddev_list_lock);
++ list_for_each(entry, &trigger->led_cdevs) {
++ struct led_classdev *led_cdev;
++ struct swconfig_trig_data *trig_data;
++
++ led_cdev = list_entry(entry, struct led_classdev, trig_list);
++ trig_data = led_cdev->trigger_data;
++ if (trig_data) {
++ read_lock(&trig_data->lock);
++ port_mask |= trig_data->port_mask;
++ read_unlock(&trig_data->lock);
++ }
++ }
++ read_unlock(&trigger->leddev_list_lock);
++
++ sw_trig->port_mask = port_mask;
++
++ if (port_mask)
++ schedule_delayed_work(&sw_trig->sw_led_work,
++ SWCONFIG_LED_TIMER_INTERVAL);
++ else
++ cancel_delayed_work_sync(&sw_trig->sw_led_work);
++}
++
++static ssize_t
++swconfig_trig_port_mask_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t size)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
++ unsigned long port_mask;
++ ssize_t ret = -EINVAL;
++ char *after;
++ size_t count;
++
++ port_mask = simple_strtoul(buf, &after, 16);
++ count = after - buf;
++
++ if (*after && isspace(*after))
++ count++;
++
++ if (count == size) {
++ bool changed;
++
++ write_lock(&trig_data->lock);
++
++ changed = (trig_data->port_mask != port_mask);
++ if (changed) {
++ trig_data->port_mask = port_mask;
++ if (port_mask == 0)
++ swconfig_trig_set_brightness(trig_data, LED_OFF);
++ }
++
++ write_unlock(&trig_data->lock);
++
++ if (changed)
++ swconfig_trig_update_port_mask(led_cdev->trigger);
++
++ ret = count;
++ }
++
++ return ret;
++}
++
++static ssize_t
++swconfig_trig_port_mask_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
++
++ read_lock(&trig_data->lock);
++ sprintf(buf, "%#x\n", trig_data->port_mask);
++ read_unlock(&trig_data->lock);
++
++ return strlen(buf) + 1;
++}
++
++static DEVICE_ATTR(port_mask, 0644, swconfig_trig_port_mask_show,
++ swconfig_trig_port_mask_store);
++
++static void
++swconfig_trig_activate(struct led_classdev *led_cdev)
++{
++ struct switch_led_trigger *sw_trig;
++ struct swconfig_trig_data *trig_data;
++ int err;
++
++ if (led_cdev->trigger->activate != swconfig_trig_activate)
++ return;
++
++ trig_data = kzalloc(sizeof(struct swconfig_trig_data), GFP_KERNEL);
++ if (!trig_data)
++ return;
++
++ sw_trig = (void *) led_cdev->trigger;
++
++ rwlock_init(&trig_data->lock);
++ trig_data->led_cdev = led_cdev;
++ trig_data->swdev = sw_trig->swdev;
++ led_cdev->trigger_data = trig_data;
++
++ err = device_create_file(led_cdev->dev, &dev_attr_port_mask);
++ if (err)
++ goto err_free;
++
++ return;
++
++err_free:
++ led_cdev->trigger_data = NULL;
++ kfree(trig_data);
++}
++
++static void
++swconfig_trig_deactivate(struct led_classdev *led_cdev)
++{
++ struct swconfig_trig_data *trig_data;
++
++ swconfig_trig_update_port_mask(led_cdev->trigger);
++
++ trig_data = (void *) led_cdev->trigger_data;
++ if (trig_data) {
++ device_remove_file(led_cdev->dev, &dev_attr_port_mask);
++ kfree(trig_data);
++ }
++}
++
++static void
++swconfig_trig_led_event(struct switch_led_trigger *sw_trig,
++ struct led_classdev *led_cdev)
++{
++ struct swconfig_trig_data *trig_data;
++ u32 port_mask;
++ bool link;
++
++ trig_data = led_cdev->trigger_data;
++ if (!trig_data)
++ return;
++
++ read_lock(&trig_data->lock);
++ port_mask = trig_data->port_mask;
++ read_unlock(&trig_data->lock);
++
++ link = !!(sw_trig->port_link & port_mask);
++ if (!link) {
++ if (link != trig_data->prev_link)
++ swconfig_trig_set_brightness(trig_data, LED_OFF);
++ } else {
++ unsigned long traffic;
++ int i;
++
++ traffic = 0;
++ for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
++ if (port_mask & (1 << i))
++ traffic += sw_trig->port_traffic[i];
++ }
++
++ if (trig_data->prev_brightness != LED_FULL)
++ swconfig_trig_set_brightness(trig_data, LED_FULL);
++ else if (traffic != trig_data->prev_traffic)
++ swconfig_trig_set_brightness(trig_data, LED_OFF);
++
++ trig_data->prev_traffic = traffic;
++ }
++
++ trig_data->prev_link = link;
++}
++
++static void
++swconfig_trig_update_leds(struct switch_led_trigger *sw_trig)
++{
++ struct list_head *entry;
++ struct led_trigger *trigger;
++
++ trigger = &sw_trig->trig;
++ read_lock(&trigger->leddev_list_lock);
++ list_for_each(entry, &trigger->led_cdevs) {
++ struct led_classdev *led_cdev;
++
++ led_cdev = list_entry(entry, struct led_classdev, trig_list);
++ swconfig_trig_led_event(sw_trig, led_cdev);
++ }
++ read_unlock(&trigger->leddev_list_lock);
++}
++
++static void
++swconfig_led_work_func(struct work_struct *work)
++{
++ struct switch_led_trigger *sw_trig;
++ struct switch_dev *swdev;
++ u32 port_mask;
++ u32 link;
++ int i;
++
++ sw_trig = container_of(work, struct switch_led_trigger,
++ sw_led_work.work);
++
++ port_mask = sw_trig->port_mask;
++ swdev = sw_trig->swdev;
++
++ link = 0;
++ for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
++ u32 port_bit;
++
++ port_bit = BIT(i);
++ if ((port_mask & port_bit) == 0)
++ continue;
++
++ if (swdev->ops->get_port_link) {
++ struct switch_port_link port_link;
++
++ memset(&port_link, '\0', sizeof(port_link));
++ swdev->ops->get_port_link(swdev, i, &port_link);
++
++ if (port_link.link)
++ link |= port_bit;
++ }
++
++ if (swdev->ops->get_port_stats) {
++ struct switch_port_stats port_stats;
++
++ memset(&port_stats, '\0', sizeof(port_stats));
++ swdev->ops->get_port_stats(swdev, i, &port_stats);
++ sw_trig->port_traffic[i] = port_stats.tx_bytes +
++ port_stats.rx_bytes;
++ }
++ }
++
++ sw_trig->port_link = link;
++
++ swconfig_trig_update_leds(sw_trig);
++
++ schedule_delayed_work(&sw_trig->sw_led_work,
++ SWCONFIG_LED_TIMER_INTERVAL);
++}
++
++static int
++swconfig_create_led_trigger(struct switch_dev *swdev)
++{
++ struct switch_led_trigger *sw_trig;
++ int err;
++
++ if (!swdev->ops->get_port_link)
++ return 0;
++
++ sw_trig = kzalloc(sizeof(struct switch_led_trigger), GFP_KERNEL);
++ if (!sw_trig)
++ return -ENOMEM;
++
++ sw_trig->swdev = swdev;
++ sw_trig->trig.name = swdev->devname;
++ sw_trig->trig.activate = swconfig_trig_activate;
++ sw_trig->trig.deactivate = swconfig_trig_deactivate;
++
++ INIT_DELAYED_WORK(&sw_trig->sw_led_work, swconfig_led_work_func);
++
++ err = led_trigger_register(&sw_trig->trig);
++ if (err)
++ goto err_free;
++
++ swdev->led_trigger = sw_trig;
++
++ return 0;
++
++err_free:
++ kfree(sw_trig);
++ return err;
++}
++
++static void
++swconfig_destroy_led_trigger(struct switch_dev *swdev)
++{
++ struct switch_led_trigger *sw_trig;
++
++ sw_trig = swdev->led_trigger;
++ if (sw_trig) {
++ cancel_delayed_work_sync(&sw_trig->sw_led_work);
++ led_trigger_unregister(&sw_trig->trig);
++ kfree(sw_trig);
++ }
++}
++
++#else /* SWCONFIG_LEDS */
++static inline int
++swconfig_create_led_trigger(struct switch_dev *swdev) { return 0; }
++
++static inline void
++swconfig_destroy_led_trigger(struct switch_dev *swdev) { }
++#endif /* CONFIG_SWCONFIG_LEDS */
+diff -Nur linux-4.1.6.orig/include/linux/switch.h linux-4.1.6/include/linux/switch.h
+--- linux-4.1.6.orig/include/linux/switch.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/include/linux/switch.h 2015-09-13 20:20:39.168854401 +0200
+@@ -0,0 +1,169 @@
++/*
++ * switch.h: Switch configuration API
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++#ifndef _LINUX_SWITCH_H
++#define _LINUX_SWITCH_H
++
++#include <net/genetlink.h>
++#include <uapi/linux/switch.h>
++
++struct switch_dev;
++struct switch_op;
++struct switch_val;
++struct switch_attr;
++struct switch_attrlist;
++struct switch_led_trigger;
++
++int register_switch(struct switch_dev *dev, struct net_device *netdev);
++void unregister_switch(struct switch_dev *dev);
++
++/**
++ * struct switch_attrlist - attribute list
++ *
++ * @n_attr: number of attributes
++ * @attr: pointer to the attributes array
++ */
++struct switch_attrlist {
++ int n_attr;
++ const struct switch_attr *attr;
++};
++
++enum switch_port_speed {
++ SWITCH_PORT_SPEED_UNKNOWN = 0,
++ SWITCH_PORT_SPEED_10 = 10,
++ SWITCH_PORT_SPEED_100 = 100,
++ SWITCH_PORT_SPEED_1000 = 1000,
++};
++
++struct switch_port_link {
++ bool link;
++ bool duplex;
++ bool aneg;
++ bool tx_flow;
++ bool rx_flow;
++ enum switch_port_speed speed;
++ /* in ethtool adv_t format */
++ u32 eee;
++};
++
++struct switch_port_stats {
++ unsigned long tx_bytes;
++ unsigned long rx_bytes;
++};
++
++/**
++ * struct switch_dev_ops - switch driver operations
++ *
++ * @attr_global: global switch attribute list
++ * @attr_port: port attribute list
++ * @attr_vlan: vlan attribute list
++ *
++ * Callbacks:
++ *
++ * @get_vlan_ports: read the port list of a VLAN
++ * @set_vlan_ports: set the port list of a VLAN
++ *
++ * @get_port_pvid: get the primary VLAN ID of a port
++ * @set_port_pvid: set the primary VLAN ID of a port
++ *
++ * @apply_config: apply all changed settings to the switch
++ * @reset_switch: resetting the switch
++ */
++struct switch_dev_ops {
++ struct switch_attrlist attr_global, attr_port, attr_vlan;
++
++ int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
++ int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
++
++ int (*get_port_pvid)(struct switch_dev *dev, int port, int *val);
++ int (*set_port_pvid)(struct switch_dev *dev, int port, int val);
++
++ int (*apply_config)(struct switch_dev *dev);
++ int (*reset_switch)(struct switch_dev *dev);
++
++ int (*get_port_link)(struct switch_dev *dev, int port,
++ struct switch_port_link *link);
++ int (*get_port_stats)(struct switch_dev *dev, int port,
++ struct switch_port_stats *stats);
++};
++
++struct switch_dev {
++ struct device_node *of_node;
++ const struct switch_dev_ops *ops;
++ /* will be automatically filled */
++ char devname[IFNAMSIZ];
++
++ const char *name;
++ /* NB: either alias or netdev must be set */
++ const char *alias;
++ struct net_device *netdev;
++
++ int ports;
++ int vlans;
++ int cpu_port;
++
++ /* the following fields are internal for swconfig */
++ int id;
++ struct list_head dev_list;
++ unsigned long def_global, def_port, def_vlan;
++
++ struct mutex sw_mutex;
++ struct switch_port *portbuf;
++ struct switch_portmap *portmap;
++
++ char buf[128];
++
++#ifdef CONFIG_SWCONFIG_LEDS
++ struct switch_led_trigger *led_trigger;
++#endif
++};
++
++struct switch_port {
++ u32 id;
++ u32 flags;
++};
++
++struct switch_portmap {
++ u32 virt;
++ const char *s;
++};
++
++struct switch_val {
++ const struct switch_attr *attr;
++ int port_vlan;
++ int len;
++ union {
++ const char *s;
++ u32 i;
++ struct switch_port *ports;
++ } value;
++};
++
++struct switch_attr {
++ int disabled;
++ int type;
++ const char *name;
++ const char *description;
++
++ int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
++ int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
++
++ /* for driver internal use */
++ int id;
++ int ofs;
++ int max;
++};
++
++#endif /* _LINUX_SWITCH_H */
+diff -Nur linux-4.1.6.orig/include/uapi/linux/Kbuild linux-4.1.6/include/uapi/linux/Kbuild
+--- linux-4.1.6.orig/include/uapi/linux/Kbuild 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/include/uapi/linux/Kbuild 2015-09-13 20:15:06.385308796 +0200
+@@ -380,6 +380,7 @@
+ header-y += string.h
+ header-y += suspend_ioctls.h
+ header-y += swab.h
++header-y += switch.h
+ header-y += synclink.h
+ header-y += sysctl.h
+ header-y += sysinfo.h
+diff -Nur linux-4.1.6.orig/include/uapi/linux/switch.h linux-4.1.6/include/uapi/linux/switch.h
+--- linux-4.1.6.orig/include/uapi/linux/switch.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/include/uapi/linux/switch.h 2015-09-13 20:20:56.895977889 +0200
+@@ -0,0 +1,103 @@
++/*
++ * switch.h: Switch configuration API
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _UAPI_LINUX_SWITCH_H
++#define _UAPI_LINUX_SWITCH_H
++
++#include <linux/types.h>
++#include <linux/netdevice.h>
++#include <linux/netlink.h>
++#include <linux/genetlink.h>
++#ifndef __KERNEL__
++#include <netlink/netlink.h>
++#include <netlink/genl/genl.h>
++#include <netlink/genl/ctrl.h>
++#endif
++
++/* main attributes */
++enum {
++ SWITCH_ATTR_UNSPEC,
++ /* global */
++ SWITCH_ATTR_TYPE,
++ /* device */
++ SWITCH_ATTR_ID,
++ SWITCH_ATTR_DEV_NAME,
++ SWITCH_ATTR_ALIAS,
++ SWITCH_ATTR_NAME,
++ SWITCH_ATTR_VLANS,
++ SWITCH_ATTR_PORTS,
++ SWITCH_ATTR_PORTMAP,
++ SWITCH_ATTR_CPU_PORT,
++ /* attributes */
++ SWITCH_ATTR_OP_ID,
++ SWITCH_ATTR_OP_TYPE,
++ SWITCH_ATTR_OP_NAME,
++ SWITCH_ATTR_OP_PORT,
++ SWITCH_ATTR_OP_VLAN,
++ SWITCH_ATTR_OP_VALUE_INT,
++ SWITCH_ATTR_OP_VALUE_STR,
++ SWITCH_ATTR_OP_VALUE_PORTS,
++ SWITCH_ATTR_OP_DESCRIPTION,
++ /* port lists */
++ SWITCH_ATTR_PORT,
++ SWITCH_ATTR_MAX
++};
++
++enum {
++ /* port map */
++ SWITCH_PORTMAP_PORTS,
++ SWITCH_PORTMAP_SEGMENT,
++ SWITCH_PORTMAP_VIRT,
++ SWITCH_PORTMAP_MAX
++};
++
++/* commands */
++enum {
++ SWITCH_CMD_UNSPEC,
++ SWITCH_CMD_GET_SWITCH,
++ SWITCH_CMD_NEW_ATTR,
++ SWITCH_CMD_LIST_GLOBAL,
++ SWITCH_CMD_GET_GLOBAL,
++ SWITCH_CMD_SET_GLOBAL,
++ SWITCH_CMD_LIST_PORT,
++ SWITCH_CMD_GET_PORT,
++ SWITCH_CMD_SET_PORT,
++ SWITCH_CMD_LIST_VLAN,
++ SWITCH_CMD_GET_VLAN,
++ SWITCH_CMD_SET_VLAN
++};
++
++/* data types */
++enum switch_val_type {
++ SWITCH_TYPE_UNSPEC,
++ SWITCH_TYPE_INT,
++ SWITCH_TYPE_STRING,
++ SWITCH_TYPE_PORTS,
++ SWITCH_TYPE_NOVAL,
++};
++
++/* port nested attributes */
++enum {
++ SWITCH_PORT_UNSPEC,
++ SWITCH_PORT_ID,
++ SWITCH_PORT_FLAG_TAGGED,
++ SWITCH_PORT_ATTR_MAX
++};
++
++#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000
++
++
++#endif /* _UAPI_LINUX_SWITCH_H */
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0015-phy-add-ar8216-PHY-support.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0015-phy-add-ar8216-PHY-support.patch
new file mode 100644
index 000000000..5ac148908
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0015-phy-add-ar8216-PHY-support.patch
@@ -0,0 +1,4513 @@
+diff -Nur linux-4.1.6.orig/drivers/net/phy/ar8216.c linux-4.1.6/drivers/net/phy/ar8216.c
+--- linux-4.1.6.orig/drivers/net/phy/ar8216.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/ar8216.c 2015-09-13 23:19:20.073314441 +0200
+@@ -0,0 +1,2182 @@
++/*
++ * ar8216.c: AR8216 switch driver
++ *
++ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/if.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/if_ether.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/netlink.h>
++#include <linux/bitops.h>
++#include <net/genetlink.h>
++#include <linux/switch.h>
++#include <linux/delay.h>
++#include <linux/phy.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/lockdep.h>
++#include <linux/ar8216_platform.h>
++#include <linux/workqueue.h>
++#include <linux/version.h>
++
++#include "ar8216.h"
++
++extern const struct ar8xxx_chip ar8327_chip;
++extern const struct ar8xxx_chip ar8337_chip;
++
++#define AR8XXX_MIB_WORK_DELAY 2000 /* msecs */
++
++#define MIB_DESC(_s , _o, _n) \
++ { \
++ .size = (_s), \
++ .offset = (_o), \
++ .name = (_n), \
++ }
++
++static const struct ar8xxx_mib_desc ar8216_mibs[] = {
++ MIB_DESC(1, AR8216_STATS_RXBROAD, "RxBroad"),
++ MIB_DESC(1, AR8216_STATS_RXPAUSE, "RxPause"),
++ MIB_DESC(1, AR8216_STATS_RXMULTI, "RxMulti"),
++ MIB_DESC(1, AR8216_STATS_RXFCSERR, "RxFcsErr"),
++ MIB_DESC(1, AR8216_STATS_RXALIGNERR, "RxAlignErr"),
++ MIB_DESC(1, AR8216_STATS_RXRUNT, "RxRunt"),
++ MIB_DESC(1, AR8216_STATS_RXFRAGMENT, "RxFragment"),
++ MIB_DESC(1, AR8216_STATS_RX64BYTE, "Rx64Byte"),
++ MIB_DESC(1, AR8216_STATS_RX128BYTE, "Rx128Byte"),
++ MIB_DESC(1, AR8216_STATS_RX256BYTE, "Rx256Byte"),
++ MIB_DESC(1, AR8216_STATS_RX512BYTE, "Rx512Byte"),
++ MIB_DESC(1, AR8216_STATS_RX1024BYTE, "Rx1024Byte"),
++ MIB_DESC(1, AR8216_STATS_RXMAXBYTE, "RxMaxByte"),
++ MIB_DESC(1, AR8216_STATS_RXTOOLONG, "RxTooLong"),
++ MIB_DESC(2, AR8216_STATS_RXGOODBYTE, "RxGoodByte"),
++ MIB_DESC(2, AR8216_STATS_RXBADBYTE, "RxBadByte"),
++ MIB_DESC(1, AR8216_STATS_RXOVERFLOW, "RxOverFlow"),
++ MIB_DESC(1, AR8216_STATS_FILTERED, "Filtered"),
++ MIB_DESC(1, AR8216_STATS_TXBROAD, "TxBroad"),
++ MIB_DESC(1, AR8216_STATS_TXPAUSE, "TxPause"),
++ MIB_DESC(1, AR8216_STATS_TXMULTI, "TxMulti"),
++ MIB_DESC(1, AR8216_STATS_TXUNDERRUN, "TxUnderRun"),
++ MIB_DESC(1, AR8216_STATS_TX64BYTE, "Tx64Byte"),
++ MIB_DESC(1, AR8216_STATS_TX128BYTE, "Tx128Byte"),
++ MIB_DESC(1, AR8216_STATS_TX256BYTE, "Tx256Byte"),
++ MIB_DESC(1, AR8216_STATS_TX512BYTE, "Tx512Byte"),
++ MIB_DESC(1, AR8216_STATS_TX1024BYTE, "Tx1024Byte"),
++ MIB_DESC(1, AR8216_STATS_TXMAXBYTE, "TxMaxByte"),
++ MIB_DESC(1, AR8216_STATS_TXOVERSIZE, "TxOverSize"),
++ MIB_DESC(2, AR8216_STATS_TXBYTE, "TxByte"),
++ MIB_DESC(1, AR8216_STATS_TXCOLLISION, "TxCollision"),
++ MIB_DESC(1, AR8216_STATS_TXABORTCOL, "TxAbortCol"),
++ MIB_DESC(1, AR8216_STATS_TXMULTICOL, "TxMultiCol"),
++ MIB_DESC(1, AR8216_STATS_TXSINGLECOL, "TxSingleCol"),
++ MIB_DESC(1, AR8216_STATS_TXEXCDEFER, "TxExcDefer"),
++ MIB_DESC(1, AR8216_STATS_TXDEFER, "TxDefer"),
++ MIB_DESC(1, AR8216_STATS_TXLATECOL, "TxLateCol"),
++};
++
++const struct ar8xxx_mib_desc ar8236_mibs[39] = {
++ MIB_DESC(1, AR8236_STATS_RXBROAD, "RxBroad"),
++ MIB_DESC(1, AR8236_STATS_RXPAUSE, "RxPause"),
++ MIB_DESC(1, AR8236_STATS_RXMULTI, "RxMulti"),
++ MIB_DESC(1, AR8236_STATS_RXFCSERR, "RxFcsErr"),
++ MIB_DESC(1, AR8236_STATS_RXALIGNERR, "RxAlignErr"),
++ MIB_DESC(1, AR8236_STATS_RXRUNT, "RxRunt"),
++ MIB_DESC(1, AR8236_STATS_RXFRAGMENT, "RxFragment"),
++ MIB_DESC(1, AR8236_STATS_RX64BYTE, "Rx64Byte"),
++ MIB_DESC(1, AR8236_STATS_RX128BYTE, "Rx128Byte"),
++ MIB_DESC(1, AR8236_STATS_RX256BYTE, "Rx256Byte"),
++ MIB_DESC(1, AR8236_STATS_RX512BYTE, "Rx512Byte"),
++ MIB_DESC(1, AR8236_STATS_RX1024BYTE, "Rx1024Byte"),
++ MIB_DESC(1, AR8236_STATS_RX1518BYTE, "Rx1518Byte"),
++ MIB_DESC(1, AR8236_STATS_RXMAXBYTE, "RxMaxByte"),
++ MIB_DESC(1, AR8236_STATS_RXTOOLONG, "RxTooLong"),
++ MIB_DESC(2, AR8236_STATS_RXGOODBYTE, "RxGoodByte"),
++ MIB_DESC(2, AR8236_STATS_RXBADBYTE, "RxBadByte"),
++ MIB_DESC(1, AR8236_STATS_RXOVERFLOW, "RxOverFlow"),
++ MIB_DESC(1, AR8236_STATS_FILTERED, "Filtered"),
++ MIB_DESC(1, AR8236_STATS_TXBROAD, "TxBroad"),
++ MIB_DESC(1, AR8236_STATS_TXPAUSE, "TxPause"),
++ MIB_DESC(1, AR8236_STATS_TXMULTI, "TxMulti"),
++ MIB_DESC(1, AR8236_STATS_TXUNDERRUN, "TxUnderRun"),
++ MIB_DESC(1, AR8236_STATS_TX64BYTE, "Tx64Byte"),
++ MIB_DESC(1, AR8236_STATS_TX128BYTE, "Tx128Byte"),
++ MIB_DESC(1, AR8236_STATS_TX256BYTE, "Tx256Byte"),
++ MIB_DESC(1, AR8236_STATS_TX512BYTE, "Tx512Byte"),
++ MIB_DESC(1, AR8236_STATS_TX1024BYTE, "Tx1024Byte"),
++ MIB_DESC(1, AR8236_STATS_TX1518BYTE, "Tx1518Byte"),
++ MIB_DESC(1, AR8236_STATS_TXMAXBYTE, "TxMaxByte"),
++ MIB_DESC(1, AR8236_STATS_TXOVERSIZE, "TxOverSize"),
++ MIB_DESC(2, AR8236_STATS_TXBYTE, "TxByte"),
++ MIB_DESC(1, AR8236_STATS_TXCOLLISION, "TxCollision"),
++ MIB_DESC(1, AR8236_STATS_TXABORTCOL, "TxAbortCol"),
++ MIB_DESC(1, AR8236_STATS_TXMULTICOL, "TxMultiCol"),
++ MIB_DESC(1, AR8236_STATS_TXSINGLECOL, "TxSingleCol"),
++ MIB_DESC(1, AR8236_STATS_TXEXCDEFER, "TxExcDefer"),
++ MIB_DESC(1, AR8236_STATS_TXDEFER, "TxDefer"),
++ MIB_DESC(1, AR8236_STATS_TXLATECOL, "TxLateCol"),
++};
++
++static DEFINE_MUTEX(ar8xxx_dev_list_lock);
++static LIST_HEAD(ar8xxx_dev_list);
++
++/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */
++static int
++ar8xxx_phy_poll_reset(struct mii_bus *bus)
++{
++ unsigned int sleep_msecs = 20;
++ int ret, elapsed, i;
++
++ for (elapsed = sleep_msecs; elapsed <= 600;
++ elapsed += sleep_msecs) {
++ msleep(sleep_msecs);
++ for (i = 0; i < AR8XXX_NUM_PHYS; i++) {
++ ret = mdiobus_read(bus, i, MII_BMCR);
++ if (ret < 0)
++ return ret;
++ if (ret & BMCR_RESET)
++ break;
++ if (i == AR8XXX_NUM_PHYS - 1) {
++ usleep_range(1000, 2000);
++ return 0;
++ }
++ }
++ }
++ return -ETIMEDOUT;
++}
++
++static int
++ar8xxx_phy_check_aneg(struct phy_device *phydev)
++{
++ int ret;
++
++ if (phydev->autoneg != AUTONEG_ENABLE)
++ return 0;
++ /*
++ * BMCR_ANENABLE might have been cleared
++ * by phy_init_hw in certain kernel versions
++ * therefore check for it
++ */
++ ret = phy_read(phydev, MII_BMCR);
++ if (ret < 0)
++ return ret;
++ if (ret & BMCR_ANENABLE)
++ return 0;
++
++ dev_info(&phydev->dev, "ANEG disabled, re-enabling ...\n");
++ ret |= BMCR_ANENABLE | BMCR_ANRESTART;
++ return phy_write(phydev, MII_BMCR, ret);
++}
++
++void
++ar8xxx_phy_init(struct ar8xxx_priv *priv)
++{
++ int i;
++ struct mii_bus *bus;
++
++ bus = priv->mii_bus;
++ for (i = 0; i < AR8XXX_NUM_PHYS; i++) {
++ if (priv->chip->phy_fixup)
++ priv->chip->phy_fixup(priv, i);
++
++ /* initialize the port itself */
++ mdiobus_write(bus, i, MII_ADVERTISE,
++ ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
++ if (ar8xxx_has_gige(priv))
++ mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
++ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
++ }
++
++ ar8xxx_phy_poll_reset(bus);
++}
++
++u32
++ar8xxx_mii_read32(struct ar8xxx_priv *priv, int phy_id, int regnum)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 lo, hi;
++
++ lo = bus->read(bus, phy_id, regnum);
++ hi = bus->read(bus, phy_id, regnum + 1);
++
++ return (hi << 16) | lo;
++}
++
++void
++ar8xxx_mii_write32(struct ar8xxx_priv *priv, int phy_id, int regnum, u32 val)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 lo, hi;
++
++ lo = val & 0xffff;
++ hi = (u16) (val >> 16);
++
++ if (priv->chip->mii_lo_first)
++ {
++ bus->write(bus, phy_id, regnum, lo);
++ bus->write(bus, phy_id, regnum + 1, hi);
++ } else {
++ bus->write(bus, phy_id, regnum + 1, hi);
++ bus->write(bus, phy_id, regnum, lo);
++ }
++}
++
++u32
++ar8xxx_read(struct ar8xxx_priv *priv, int reg)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 r1, r2, page;
++ u32 val;
++
++ split_addr((u32) reg, &r1, &r2, &page);
++
++ mutex_lock(&bus->mdio_lock);
++
++ bus->write(bus, 0x18, 0, page);
++ wait_for_page_switch();
++ val = ar8xxx_mii_read32(priv, 0x10 | r2, r1);
++
++ mutex_unlock(&bus->mdio_lock);
++
++ return val;
++}
++
++void
++ar8xxx_write(struct ar8xxx_priv *priv, int reg, u32 val)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 r1, r2, page;
++
++ split_addr((u32) reg, &r1, &r2, &page);
++
++ mutex_lock(&bus->mdio_lock);
++
++ bus->write(bus, 0x18, 0, page);
++ wait_for_page_switch();
++ ar8xxx_mii_write32(priv, 0x10 | r2, r1, val);
++
++ mutex_unlock(&bus->mdio_lock);
++}
++
++u32
++ar8xxx_rmw(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 r1, r2, page;
++ u32 ret;
++
++ split_addr((u32) reg, &r1, &r2, &page);
++
++ mutex_lock(&bus->mdio_lock);
++
++ bus->write(bus, 0x18, 0, page);
++ wait_for_page_switch();
++
++ ret = ar8xxx_mii_read32(priv, 0x10 | r2, r1);
++ ret &= ~mask;
++ ret |= val;
++ ar8xxx_mii_write32(priv, 0x10 | r2, r1, ret);
++
++ mutex_unlock(&bus->mdio_lock);
++
++ return ret;
++}
++
++void
++ar8xxx_phy_dbg_write(struct ar8xxx_priv *priv, int phy_addr,
++ u16 dbg_addr, u16 dbg_data)
++{
++ struct mii_bus *bus = priv->mii_bus;
++
++ mutex_lock(&bus->mdio_lock);
++ bus->write(bus, phy_addr, MII_ATH_DBG_ADDR, dbg_addr);
++ bus->write(bus, phy_addr, MII_ATH_DBG_DATA, dbg_data);
++ mutex_unlock(&bus->mdio_lock);
++}
++
++void
++ar8xxx_phy_mmd_write(struct ar8xxx_priv *priv, int phy_addr, u16 addr, u16 data)
++{
++ struct mii_bus *bus = priv->mii_bus;
++
++ mutex_lock(&bus->mdio_lock);
++ bus->write(bus, phy_addr, MII_ATH_MMD_ADDR, addr);
++ bus->write(bus, phy_addr, MII_ATH_MMD_DATA, data);
++ mutex_unlock(&bus->mdio_lock);
++}
++
++u16
++ar8xxx_phy_mmd_read(struct ar8xxx_priv *priv, int phy_addr, u16 addr)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 data;
++
++ mutex_lock(&bus->mdio_lock);
++ bus->write(bus, phy_addr, MII_ATH_MMD_ADDR, addr);
++ data = bus->read(bus, phy_addr, MII_ATH_MMD_DATA);
++ mutex_unlock(&bus->mdio_lock);
++
++ return data;
++}
++
++static int
++ar8xxx_reg_wait(struct ar8xxx_priv *priv, u32 reg, u32 mask, u32 val,
++ unsigned timeout)
++{
++ int i;
++
++ for (i = 0; i < timeout; i++) {
++ u32 t;
++
++ t = ar8xxx_read(priv, reg);
++ if ((t & mask) == val)
++ return 0;
++
++ usleep_range(1000, 2000);
++ }
++
++ return -ETIMEDOUT;
++}
++
++static int
++ar8xxx_mib_op(struct ar8xxx_priv *priv, u32 op)
++{
++ unsigned mib_func = priv->chip->mib_func;
++ int ret;
++
++ lockdep_assert_held(&priv->mib_lock);
++
++ /* Capture the hardware statistics for all ports */
++ ar8xxx_rmw(priv, mib_func, AR8216_MIB_FUNC, (op << AR8216_MIB_FUNC_S));
++
++ /* Wait for the capturing to complete. */
++ ret = ar8xxx_reg_wait(priv, mib_func, AR8216_MIB_BUSY, 0, 10);
++ if (ret)
++ goto out;
++
++ ret = 0;
++
++out:
++ return ret;
++}
++
++static int
++ar8xxx_mib_capture(struct ar8xxx_priv *priv)
++{
++ return ar8xxx_mib_op(priv, AR8216_MIB_FUNC_CAPTURE);
++}
++
++static int
++ar8xxx_mib_flush(struct ar8xxx_priv *priv)
++{
++ return ar8xxx_mib_op(priv, AR8216_MIB_FUNC_FLUSH);
++}
++
++static void
++ar8xxx_mib_fetch_port_stat(struct ar8xxx_priv *priv, int port, bool flush)
++{
++ unsigned int base;
++ u64 *mib_stats;
++ int i;
++
++ WARN_ON(port >= priv->dev.ports);
++
++ lockdep_assert_held(&priv->mib_lock);
++
++ base = priv->chip->reg_port_stats_start +
++ priv->chip->reg_port_stats_length * port;
++
++ mib_stats = &priv->mib_stats[port * priv->chip->num_mibs];
++ for (i = 0; i < priv->chip->num_mibs; i++) {
++ const struct ar8xxx_mib_desc *mib;
++ u64 t;
++
++ mib = &priv->chip->mib_decs[i];
++ t = ar8xxx_read(priv, base + mib->offset);
++ if (mib->size == 2) {
++ u64 hi;
++
++ hi = ar8xxx_read(priv, base + mib->offset + 4);
++ t |= hi << 32;
++ }
++
++ if (flush)
++ mib_stats[i] = 0;
++ else
++ mib_stats[i] += t;
++ }
++}
++
++static void
++ar8216_read_port_link(struct ar8xxx_priv *priv, int port,
++ struct switch_port_link *link)
++{
++ u32 status;
++ u32 speed;
++
++ memset(link, '\0', sizeof(*link));
++
++ status = priv->chip->read_port_status(priv, port);
++
++ link->aneg = !!(status & AR8216_PORT_STATUS_LINK_AUTO);
++ if (link->aneg) {
++ link->link = !!(status & AR8216_PORT_STATUS_LINK_UP);
++ } else {
++ link->link = true;
++
++ if (priv->get_port_link) {
++ int err;
++
++ err = priv->get_port_link(port);
++ if (err >= 0)
++ link->link = !!err;
++ }
++ }
++
++ if (!link->link)
++ return;
++
++ link->duplex = !!(status & AR8216_PORT_STATUS_DUPLEX);
++ link->tx_flow = !!(status & AR8216_PORT_STATUS_TXFLOW);
++ link->rx_flow = !!(status & AR8216_PORT_STATUS_RXFLOW);
++
++ if (link->aneg && link->duplex && priv->chip->read_port_eee_status)
++ link->eee = priv->chip->read_port_eee_status(priv, port);
++
++ speed = (status & AR8216_PORT_STATUS_SPEED) >>
++ AR8216_PORT_STATUS_SPEED_S;
++
++ switch (speed) {
++ case AR8216_PORT_SPEED_10M:
++ link->speed = SWITCH_PORT_SPEED_10;
++ break;
++ case AR8216_PORT_SPEED_100M:
++ link->speed = SWITCH_PORT_SPEED_100;
++ break;
++ case AR8216_PORT_SPEED_1000M:
++ link->speed = SWITCH_PORT_SPEED_1000;
++ break;
++ default:
++ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++ break;
++ }
++}
++
++static struct sk_buff *
++ar8216_mangle_tx(struct net_device *dev, struct sk_buff *skb)
++{
++ struct ar8xxx_priv *priv = dev->phy_ptr;
++ unsigned char *buf;
++
++ if (unlikely(!priv))
++ goto error;
++
++ if (!priv->vlan)
++ goto send;
++
++ if (unlikely(skb_headroom(skb) < 2)) {
++ if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
++ goto error;
++ }
++
++ buf = skb_push(skb, 2);
++ buf[0] = 0x10;
++ buf[1] = 0x80;
++
++send:
++ return skb;
++
++error:
++ dev_kfree_skb_any(skb);
++ return NULL;
++}
++
++static void
++ar8216_mangle_rx(struct net_device *dev, struct sk_buff *skb)
++{
++ struct ar8xxx_priv *priv;
++ unsigned char *buf;
++ int port, vlan;
++
++ priv = dev->phy_ptr;
++ if (!priv)
++ return;
++
++ /* don't strip the header if vlan mode is disabled */
++ if (!priv->vlan)
++ return;
++
++ /* strip header, get vlan id */
++ buf = skb->data;
++ skb_pull(skb, 2);
++
++ /* check for vlan header presence */
++ if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
++ return;
++
++ port = buf[0] & 0xf;
++
++ /* no need to fix up packets coming from a tagged source */
++ if (priv->vlan_tagged & (1 << port))
++ return;
++
++ /* lookup port vid from local table, the switch passes an invalid vlan id */
++ vlan = priv->vlan_id[priv->pvid[port]];
++
++ buf[14 + 2] &= 0xf0;
++ buf[14 + 2] |= vlan >> 8;
++ buf[15 + 2] = vlan & 0xff;
++}
++
++int
++ar8216_wait_bit(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val)
++{
++ int timeout = 20;
++ u32 t = 0;
++
++ while (1) {
++ t = ar8xxx_read(priv, reg);
++ if ((t & mask) == val)
++ return 0;
++
++ if (timeout-- <= 0)
++ break;
++
++ udelay(10);
++ }
++
++ pr_err("ar8216: timeout on reg %08x: %08x & %08x != %08x\n",
++ (unsigned int) reg, t, mask, val);
++ return -ETIMEDOUT;
++}
++
++static void
++ar8216_vtu_op(struct ar8xxx_priv *priv, u32 op, u32 val)
++{
++ if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
++ return;
++ if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
++ val &= AR8216_VTUDATA_MEMBER;
++ val |= AR8216_VTUDATA_VALID;
++ ar8xxx_write(priv, AR8216_REG_VTU_DATA, val);
++ }
++ op |= AR8216_VTU_ACTIVE;
++ ar8xxx_write(priv, AR8216_REG_VTU, op);
++}
++
++static void
++ar8216_vtu_flush(struct ar8xxx_priv *priv)
++{
++ ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
++}
++
++static void
++ar8216_vtu_load_vlan(struct ar8xxx_priv *priv, u32 vid, u32 port_mask)
++{
++ u32 op;
++
++ op = AR8216_VTU_OP_LOAD | (vid << AR8216_VTU_VID_S);
++ ar8216_vtu_op(priv, op, port_mask);
++}
++
++static int
++ar8216_atu_flush(struct ar8xxx_priv *priv)
++{
++ int ret;
++
++ ret = ar8216_wait_bit(priv, AR8216_REG_ATU_FUNC0, AR8216_ATU_ACTIVE, 0);
++ if (!ret)
++ ar8xxx_write(priv, AR8216_REG_ATU_FUNC0, AR8216_ATU_OP_FLUSH |
++ AR8216_ATU_ACTIVE);
++
++ return ret;
++}
++
++static int
++ar8216_atu_flush_port(struct ar8xxx_priv *priv, int port)
++{
++ u32 t;
++ int ret;
++
++ ret = ar8216_wait_bit(priv, AR8216_REG_ATU_FUNC0, AR8216_ATU_ACTIVE, 0);
++ if (!ret) {
++ t = (port << AR8216_ATU_PORT_NUM_S) | AR8216_ATU_OP_FLUSH_PORT;
++ t |= AR8216_ATU_ACTIVE;
++ ar8xxx_write(priv, AR8216_REG_ATU_FUNC0, t);
++ }
++
++ return ret;
++}
++
++static u32
++ar8216_read_port_status(struct ar8xxx_priv *priv, int port)
++{
++ return ar8xxx_read(priv, AR8216_REG_PORT_STATUS(port));
++}
++
++static void
++ar8216_setup_port(struct ar8xxx_priv *priv, int port, u32 members)
++{
++ u32 header;
++ u32 egress, ingress;
++ u32 pvid;
++
++ if (priv->vlan) {
++ pvid = priv->vlan_id[priv->pvid[port]];
++ if (priv->vlan_tagged & (1 << port))
++ egress = AR8216_OUT_ADD_VLAN;
++ else
++ egress = AR8216_OUT_STRIP_VLAN;
++ ingress = AR8216_IN_SECURE;
++ } else {
++ pvid = port;
++ egress = AR8216_OUT_KEEP;
++ ingress = AR8216_IN_PORT_ONLY;
++ }
++
++ if (chip_is_ar8216(priv) && priv->vlan && port == AR8216_PORT_CPU)
++ header = AR8216_PORT_CTRL_HEADER;
++ else
++ header = 0;
++
++ ar8xxx_rmw(priv, AR8216_REG_PORT_CTRL(port),
++ AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
++ AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
++ AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
++ AR8216_PORT_CTRL_LEARN | header |
++ (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
++ (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
++
++ ar8xxx_rmw(priv, AR8216_REG_PORT_VLAN(port),
++ AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
++ AR8216_PORT_VLAN_DEFAULT_ID,
++ (members << AR8216_PORT_VLAN_DEST_PORTS_S) |
++ (ingress << AR8216_PORT_VLAN_MODE_S) |
++ (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
++}
++
++static int
++ar8216_hw_init(struct ar8xxx_priv *priv)
++{
++ if (priv->initialized)
++ return 0;
++
++ ar8xxx_phy_init(priv);
++
++ priv->initialized = true;
++ return 0;
++}
++
++static void
++ar8216_init_globals(struct ar8xxx_priv *priv)
++{
++ /* standard atheros magic */
++ ar8xxx_write(priv, 0x38, 0xc000050e);
++
++ ar8xxx_rmw(priv, AR8216_REG_GLOBAL_CTRL,
++ AR8216_GCTRL_MTU, 1518 + 8 + 2);
++}
++
++static void
++ar8216_init_port(struct ar8xxx_priv *priv, int port)
++{
++ /* Enable port learning and tx */
++ ar8xxx_write(priv, AR8216_REG_PORT_CTRL(port),
++ AR8216_PORT_CTRL_LEARN |
++ (4 << AR8216_PORT_CTRL_STATE_S));
++
++ ar8xxx_write(priv, AR8216_REG_PORT_VLAN(port), 0);
++
++ if (port == AR8216_PORT_CPU) {
++ ar8xxx_write(priv, AR8216_REG_PORT_STATUS(port),
++ AR8216_PORT_STATUS_LINK_UP |
++ (ar8xxx_has_gige(priv) ?
++ AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) |
++ AR8216_PORT_STATUS_TXMAC |
++ AR8216_PORT_STATUS_RXMAC |
++ (chip_is_ar8316(priv) ? AR8216_PORT_STATUS_RXFLOW : 0) |
++ (chip_is_ar8316(priv) ? AR8216_PORT_STATUS_TXFLOW : 0) |
++ AR8216_PORT_STATUS_DUPLEX);
++ } else {
++ ar8xxx_write(priv, AR8216_REG_PORT_STATUS(port),
++ AR8216_PORT_STATUS_LINK_AUTO);
++ }
++}
++
++static void
++ar8216_wait_atu_ready(struct ar8xxx_priv *priv, u16 r2, u16 r1)
++{
++ int timeout = 20;
++
++ while (ar8xxx_mii_read32(priv, r2, r1) & AR8216_ATU_ACTIVE && --timeout)
++ udelay(10);
++
++ if (!timeout)
++ pr_err("ar8216: timeout waiting for atu to become ready\n");
++}
++
++static void ar8216_get_arl_entry(struct ar8xxx_priv *priv,
++ struct arl_entry *a, u32 *status, enum arl_op op)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 r2, page;
++ u16 r1_func0, r1_func1, r1_func2;
++ u32 t, val0, val1, val2;
++ int i;
++
++ split_addr(AR8216_REG_ATU_FUNC0, &r1_func0, &r2, &page);
++ r2 |= 0x10;
++
++ r1_func1 = (AR8216_REG_ATU_FUNC1 >> 1) & 0x1e;
++ r1_func2 = (AR8216_REG_ATU_FUNC2 >> 1) & 0x1e;
++
++ switch (op) {
++ case AR8XXX_ARL_INITIALIZE:
++ /* all ATU registers are on the same page
++ * therefore set page only once
++ */
++ bus->write(bus, 0x18, 0, page);
++ wait_for_page_switch();
++
++ ar8216_wait_atu_ready(priv, r2, r1_func0);
++
++ ar8xxx_mii_write32(priv, r2, r1_func0, AR8216_ATU_OP_GET_NEXT);
++ ar8xxx_mii_write32(priv, r2, r1_func1, 0);
++ ar8xxx_mii_write32(priv, r2, r1_func2, 0);
++ break;
++ case AR8XXX_ARL_GET_NEXT:
++ t = ar8xxx_mii_read32(priv, r2, r1_func0);
++ t |= AR8216_ATU_ACTIVE;
++ ar8xxx_mii_write32(priv, r2, r1_func0, t);
++ ar8216_wait_atu_ready(priv, r2, r1_func0);
++
++ val0 = ar8xxx_mii_read32(priv, r2, r1_func0);
++ val1 = ar8xxx_mii_read32(priv, r2, r1_func1);
++ val2 = ar8xxx_mii_read32(priv, r2, r1_func2);
++
++ *status = (val2 & AR8216_ATU_STATUS) >> AR8216_ATU_STATUS_S;
++ if (!*status)
++ break;
++
++ i = 0;
++ t = AR8216_ATU_PORT0;
++ while (!(val2 & t) && ++i < priv->dev.ports)
++ t <<= 1;
++
++ a->port = i;
++ a->mac[0] = (val0 & AR8216_ATU_ADDR5) >> AR8216_ATU_ADDR5_S;
++ a->mac[1] = (val0 & AR8216_ATU_ADDR4) >> AR8216_ATU_ADDR4_S;
++ a->mac[2] = (val1 & AR8216_ATU_ADDR3) >> AR8216_ATU_ADDR3_S;
++ a->mac[3] = (val1 & AR8216_ATU_ADDR2) >> AR8216_ATU_ADDR2_S;
++ a->mac[4] = (val1 & AR8216_ATU_ADDR1) >> AR8216_ATU_ADDR1_S;
++ a->mac[5] = (val1 & AR8216_ATU_ADDR0) >> AR8216_ATU_ADDR0_S;
++ break;
++ }
++}
++
++static void
++ar8236_setup_port(struct ar8xxx_priv *priv, int port, u32 members)
++{
++ u32 egress, ingress;
++ u32 pvid;
++
++ if (priv->vlan) {
++ pvid = priv->vlan_id[priv->pvid[port]];
++ if (priv->vlan_tagged & (1 << port))
++ egress = AR8216_OUT_ADD_VLAN;
++ else
++ egress = AR8216_OUT_STRIP_VLAN;
++ ingress = AR8216_IN_SECURE;
++ } else {
++ pvid = port;
++ egress = AR8216_OUT_KEEP;
++ ingress = AR8216_IN_PORT_ONLY;
++ }
++
++ ar8xxx_rmw(priv, AR8216_REG_PORT_CTRL(port),
++ AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
++ AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
++ AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
++ AR8216_PORT_CTRL_LEARN |
++ (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
++ (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
++
++ ar8xxx_rmw(priv, AR8236_REG_PORT_VLAN(port),
++ AR8236_PORT_VLAN_DEFAULT_ID,
++ (pvid << AR8236_PORT_VLAN_DEFAULT_ID_S));
++
++ ar8xxx_rmw(priv, AR8236_REG_PORT_VLAN2(port),
++ AR8236_PORT_VLAN2_VLAN_MODE |
++ AR8236_PORT_VLAN2_MEMBER,
++ (ingress << AR8236_PORT_VLAN2_VLAN_MODE_S) |
++ (members << AR8236_PORT_VLAN2_MEMBER_S));
++}
++
++static void
++ar8236_init_globals(struct ar8xxx_priv *priv)
++{
++ /* enable jumbo frames */
++ ar8xxx_rmw(priv, AR8216_REG_GLOBAL_CTRL,
++ AR8316_GCTRL_MTU, 9018 + 8 + 2);
++
++ /* enable cpu port to receive arp frames */
++ ar8xxx_reg_set(priv, AR8216_REG_ATU_CTRL,
++ AR8236_ATU_CTRL_RES);
++
++ /* enable cpu port to receive multicast and broadcast frames */
++ ar8xxx_reg_set(priv, AR8216_REG_FLOOD_MASK,
++ AR8236_FM_CPU_BROADCAST_EN | AR8236_FM_CPU_BCAST_FWD_EN);
++
++ /* Enable MIB counters */
++ ar8xxx_rmw(priv, AR8216_REG_MIB_FUNC, AR8216_MIB_FUNC | AR8236_MIB_EN,
++ (AR8216_MIB_FUNC_NO_OP << AR8216_MIB_FUNC_S) |
++ AR8236_MIB_EN);
++}
++
++static int
++ar8316_hw_init(struct ar8xxx_priv *priv)
++{
++ u32 val, newval;
++
++ val = ar8xxx_read(priv, AR8316_REG_POSTRIP);
++
++ if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
++ if (priv->port4_phy) {
++ /* value taken from Ubiquiti RouterStation Pro */
++ newval = 0x81461bea;
++ pr_info("ar8316: Using port 4 as PHY\n");
++ } else {
++ newval = 0x01261be2;
++ pr_info("ar8316: Using port 4 as switch port\n");
++ }
++ } else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
++ /* value taken from AVM Fritz!Box 7390 sources */
++ newval = 0x010e5b71;
++ } else {
++ /* no known value for phy interface */
++ pr_err("ar8316: unsupported mii mode: %d.\n",
++ priv->phy->interface);
++ return -EINVAL;
++ }
++
++ if (val == newval)
++ goto out;
++
++ ar8xxx_write(priv, AR8316_REG_POSTRIP, newval);
++
++ if (priv->port4_phy &&
++ priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
++ /* work around for phy4 rgmii mode */
++ ar8xxx_phy_dbg_write(priv, 4, 0x12, 0x480c);
++ /* rx delay */
++ ar8xxx_phy_dbg_write(priv, 4, 0x0, 0x824e);
++ /* tx delay */
++ ar8xxx_phy_dbg_write(priv, 4, 0x5, 0x3d47);
++ msleep(1000);
++ }
++
++ ar8xxx_phy_init(priv);
++
++out:
++ priv->initialized = true;
++ return 0;
++}
++
++static void
++ar8316_init_globals(struct ar8xxx_priv *priv)
++{
++ /* standard atheros magic */
++ ar8xxx_write(priv, 0x38, 0xc000050e);
++
++ /* enable cpu port to receive multicast and broadcast frames */
++ ar8xxx_write(priv, AR8216_REG_FLOOD_MASK, 0x003f003f);
++
++ /* enable jumbo frames */
++ ar8xxx_rmw(priv, AR8216_REG_GLOBAL_CTRL,
++ AR8316_GCTRL_MTU, 9018 + 8 + 2);
++
++ /* Enable MIB counters */
++ ar8xxx_rmw(priv, AR8216_REG_MIB_FUNC, AR8216_MIB_FUNC | AR8236_MIB_EN,
++ (AR8216_MIB_FUNC_NO_OP << AR8216_MIB_FUNC_S) |
++ AR8236_MIB_EN);
++}
++
++int
++ar8xxx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ priv->vlan = !!val->value.i;
++ return 0;
++}
++
++int
++ar8xxx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ val->value.i = priv->vlan;
++ return 0;
++}
++
++
++int
++ar8xxx_sw_set_pvid(struct switch_dev *dev, int port, int vlan)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++
++ /* make sure no invalid PVIDs get set */
++
++ if (vlan >= dev->vlans)
++ return -EINVAL;
++
++ priv->pvid[port] = vlan;
++ return 0;
++}
++
++int
++ar8xxx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ *vlan = priv->pvid[port];
++ return 0;
++}
++
++static int
++ar8xxx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ priv->vlan_id[val->port_vlan] = val->value.i;
++ return 0;
++}
++
++static int
++ar8xxx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ val->value.i = priv->vlan_id[val->port_vlan];
++ return 0;
++}
++
++int
++ar8xxx_sw_get_port_link(struct switch_dev *dev, int port,
++ struct switch_port_link *link)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++
++ ar8216_read_port_link(priv, port, link);
++ return 0;
++}
++
++static int
++ar8xxx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ u8 ports = priv->vlan_table[val->port_vlan];
++ int i;
++
++ val->len = 0;
++ for (i = 0; i < dev->ports; i++) {
++ struct switch_port *p;
++
++ if (!(ports & (1 << i)))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++ if (priv->vlan_tagged & (1 << i))
++ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
++ else
++ p->flags = 0;
++ }
++ return 0;
++}
++
++static int
++ar8xxx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ u8 *vt = &priv->vlan_table[val->port_vlan];
++ int i, j;
++
++ *vt = 0;
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++
++ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
++ priv->vlan_tagged |= (1 << p->id);
++ } else {
++ priv->vlan_tagged &= ~(1 << p->id);
++ priv->pvid[p->id] = val->port_vlan;
++
++ /* make sure that an untagged port does not
++ * appear in other vlans */
++ for (j = 0; j < AR8X16_MAX_VLANS; j++) {
++ if (j == val->port_vlan)
++ continue;
++ priv->vlan_table[j] &= ~(1 << p->id);
++ }
++ }
++
++ *vt |= 1 << p->id;
++ }
++ return 0;
++}
++
++static void
++ar8216_set_mirror_regs(struct ar8xxx_priv *priv)
++{
++ int port;
++
++ /* reset all mirror registers */
++ ar8xxx_rmw(priv, AR8216_REG_GLOBAL_CPUPORT,
++ AR8216_GLOBAL_CPUPORT_MIRROR_PORT,
++ (0xF << AR8216_GLOBAL_CPUPORT_MIRROR_PORT_S));
++ for (port = 0; port < AR8216_NUM_PORTS; port++) {
++ ar8xxx_reg_clear(priv, AR8216_REG_PORT_CTRL(port),
++ AR8216_PORT_CTRL_MIRROR_RX);
++
++ ar8xxx_reg_clear(priv, AR8216_REG_PORT_CTRL(port),
++ AR8216_PORT_CTRL_MIRROR_TX);
++ }
++
++ /* now enable mirroring if necessary */
++ if (priv->source_port >= AR8216_NUM_PORTS ||
++ priv->monitor_port >= AR8216_NUM_PORTS ||
++ priv->source_port == priv->monitor_port) {
++ return;
++ }
++
++ ar8xxx_rmw(priv, AR8216_REG_GLOBAL_CPUPORT,
++ AR8216_GLOBAL_CPUPORT_MIRROR_PORT,
++ (priv->monitor_port << AR8216_GLOBAL_CPUPORT_MIRROR_PORT_S));
++
++ if (priv->mirror_rx)
++ ar8xxx_reg_set(priv, AR8216_REG_PORT_CTRL(priv->source_port),
++ AR8216_PORT_CTRL_MIRROR_RX);
++
++ if (priv->mirror_tx)
++ ar8xxx_reg_set(priv, AR8216_REG_PORT_CTRL(priv->source_port),
++ AR8216_PORT_CTRL_MIRROR_TX);
++}
++
++int
++ar8xxx_sw_hw_apply(struct switch_dev *dev)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ u8 portmask[AR8X16_MAX_PORTS];
++ int i, j;
++
++ mutex_lock(&priv->reg_mutex);
++ /* flush all vlan translation unit entries */
++ priv->chip->vtu_flush(priv);
++
++ memset(portmask, 0, sizeof(portmask));
++ if (!priv->init) {
++ /* calculate the port destination masks and load vlans
++ * into the vlan translation unit */
++ for (j = 0; j < AR8X16_MAX_VLANS; j++) {
++ u8 vp = priv->vlan_table[j];
++
++ if (!vp)
++ continue;
++
++ for (i = 0; i < dev->ports; i++) {
++ u8 mask = (1 << i);
++ if (vp & mask)
++ portmask[i] |= vp & ~mask;
++ }
++
++ priv->chip->vtu_load_vlan(priv, priv->vlan_id[j],
++ priv->vlan_table[j]);
++ }
++ } else {
++ /* vlan disabled:
++ * isolate all ports, but connect them to the cpu port */
++ for (i = 0; i < dev->ports; i++) {
++ if (i == AR8216_PORT_CPU)
++ continue;
++
++ portmask[i] = 1 << AR8216_PORT_CPU;
++ portmask[AR8216_PORT_CPU] |= (1 << i);
++ }
++ }
++
++ /* update the port destination mask registers and tag settings */
++ for (i = 0; i < dev->ports; i++) {
++ priv->chip->setup_port(priv, i, portmask[i]);
++ }
++
++ priv->chip->set_mirror_regs(priv);
++
++ mutex_unlock(&priv->reg_mutex);
++ return 0;
++}
++
++int
++ar8xxx_sw_reset_switch(struct switch_dev *dev)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ const struct ar8xxx_chip *chip = priv->chip;
++ int i;
++
++ mutex_lock(&priv->reg_mutex);
++ memset(&priv->vlan, 0, sizeof(struct ar8xxx_priv) -
++ offsetof(struct ar8xxx_priv, vlan));
++
++ for (i = 0; i < AR8X16_MAX_VLANS; i++)
++ priv->vlan_id[i] = i;
++
++ /* Configure all ports */
++ for (i = 0; i < dev->ports; i++)
++ chip->init_port(priv, i);
++
++ priv->mirror_rx = false;
++ priv->mirror_tx = false;
++ priv->source_port = 0;
++ priv->monitor_port = 0;
++
++ chip->init_globals(priv);
++
++ mutex_unlock(&priv->reg_mutex);
++
++ return chip->sw_hw_apply(dev);
++}
++
++int
++ar8xxx_sw_set_reset_mibs(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ unsigned int len;
++ int ret;
++
++ if (!ar8xxx_has_mib_counters(priv))
++ return -EOPNOTSUPP;
++
++ mutex_lock(&priv->mib_lock);
++
++ len = priv->dev.ports * priv->chip->num_mibs *
++ sizeof(*priv->mib_stats);
++ memset(priv->mib_stats, '\0', len);
++ ret = ar8xxx_mib_flush(priv);
++ if (ret)
++ goto unlock;
++
++ ret = 0;
++
++unlock:
++ mutex_unlock(&priv->mib_lock);
++ return ret;
++}
++
++int
++ar8xxx_sw_set_mirror_rx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->mirror_rx = !!val->value.i;
++ priv->chip->set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++int
++ar8xxx_sw_get_mirror_rx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ val->value.i = priv->mirror_rx;
++ return 0;
++}
++
++int
++ar8xxx_sw_set_mirror_tx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->mirror_tx = !!val->value.i;
++ priv->chip->set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++int
++ar8xxx_sw_get_mirror_tx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ val->value.i = priv->mirror_tx;
++ return 0;
++}
++
++int
++ar8xxx_sw_set_mirror_monitor_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->monitor_port = val->value.i;
++ priv->chip->set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++int
++ar8xxx_sw_get_mirror_monitor_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ val->value.i = priv->monitor_port;
++ return 0;
++}
++
++int
++ar8xxx_sw_set_mirror_source_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->source_port = val->value.i;
++ priv->chip->set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++int
++ar8xxx_sw_get_mirror_source_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ val->value.i = priv->source_port;
++ return 0;
++}
++
++int
++ar8xxx_sw_set_port_reset_mib(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ int port;
++ int ret;
++
++ if (!ar8xxx_has_mib_counters(priv))
++ return -EOPNOTSUPP;
++
++ port = val->port_vlan;
++ if (port >= dev->ports)
++ return -EINVAL;
++
++ mutex_lock(&priv->mib_lock);
++ ret = ar8xxx_mib_capture(priv);
++ if (ret)
++ goto unlock;
++
++ ar8xxx_mib_fetch_port_stat(priv, port, true);
++
++ ret = 0;
++
++unlock:
++ mutex_unlock(&priv->mib_lock);
++ return ret;
++}
++
++int
++ar8xxx_sw_get_port_mib(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ const struct ar8xxx_chip *chip = priv->chip;
++ u64 *mib_stats;
++ int port;
++ int ret;
++ char *buf = priv->buf;
++ int i, len = 0;
++
++ if (!ar8xxx_has_mib_counters(priv))
++ return -EOPNOTSUPP;
++
++ port = val->port_vlan;
++ if (port >= dev->ports)
++ return -EINVAL;
++
++ mutex_lock(&priv->mib_lock);
++ ret = ar8xxx_mib_capture(priv);
++ if (ret)
++ goto unlock;
++
++ ar8xxx_mib_fetch_port_stat(priv, port, false);
++
++ len += snprintf(buf + len, sizeof(priv->buf) - len,
++ "Port %d MIB counters\n",
++ port);
++
++ mib_stats = &priv->mib_stats[port * chip->num_mibs];
++ for (i = 0; i < chip->num_mibs; i++)
++ len += snprintf(buf + len, sizeof(priv->buf) - len,
++ "%-12s: %llu\n",
++ chip->mib_decs[i].name,
++ mib_stats[i]);
++
++ val->value.s = buf;
++ val->len = len;
++
++ ret = 0;
++
++unlock:
++ mutex_unlock(&priv->mib_lock);
++ return ret;
++}
++
++int
++ar8xxx_sw_get_arl_table(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ struct mii_bus *bus = priv->mii_bus;
++ const struct ar8xxx_chip *chip = priv->chip;
++ char *buf = priv->arl_buf;
++ int i, j, k, len = 0;
++ struct arl_entry *a, *a1;
++ u32 status;
++
++ if (!chip->get_arl_entry)
++ return -EOPNOTSUPP;
++
++ mutex_lock(&priv->reg_mutex);
++ mutex_lock(&bus->mdio_lock);
++
++ chip->get_arl_entry(priv, NULL, NULL, AR8XXX_ARL_INITIALIZE);
++
++ for(i = 0; i < AR8XXX_NUM_ARL_RECORDS; ++i) {
++ a = &priv->arl_table[i];
++ duplicate:
++ chip->get_arl_entry(priv, a, &status, AR8XXX_ARL_GET_NEXT);
++
++ if (!status)
++ break;
++
++ /* avoid duplicates
++ * ARL table can include multiple valid entries
++ * per MAC, just with differing status codes
++ */
++ for (j = 0; j < i; ++j) {
++ a1 = &priv->arl_table[j];
++ if (a->port == a1->port && !memcmp(a->mac, a1->mac, sizeof(a->mac)))
++ goto duplicate;
++ }
++ }
++
++ mutex_unlock(&bus->mdio_lock);
++
++ len += snprintf(buf + len, sizeof(priv->arl_buf) - len,
++ "address resolution table\n");
++
++ if (i == AR8XXX_NUM_ARL_RECORDS)
++ len += snprintf(buf + len, sizeof(priv->arl_buf) - len,
++ "Too many entries found, displaying the first %d only!\n",
++ AR8XXX_NUM_ARL_RECORDS);
++
++ for (j = 0; j < priv->dev.ports; ++j) {
++ for (k = 0; k < i; ++k) {
++ a = &priv->arl_table[k];
++ if (a->port != j)
++ continue;
++ len += snprintf(buf + len, sizeof(priv->arl_buf) - len,
++ "Port %d: MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
++ j,
++ a->mac[5], a->mac[4], a->mac[3],
++ a->mac[2], a->mac[1], a->mac[0]);
++ }
++ }
++
++ val->value.s = buf;
++ val->len = len;
++
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++int
++ar8xxx_sw_set_flush_arl_table(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ int ret;
++
++ mutex_lock(&priv->reg_mutex);
++ ret = priv->chip->atu_flush(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return ret;
++}
++
++int
++ar8xxx_sw_set_flush_port_arl_table(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ int port, ret;
++
++ port = val->port_vlan;
++ if (port >= dev->ports)
++ return -EINVAL;
++
++ mutex_lock(&priv->reg_mutex);
++ ret = priv->chip->atu_flush_port(priv, port);
++ mutex_unlock(&priv->reg_mutex);
++
++ return ret;
++}
++
++static const struct switch_attr ar8xxx_sw_attr_globals[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "Enable VLAN mode",
++ .set = ar8xxx_sw_set_vlan,
++ .get = ar8xxx_sw_get_vlan,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "reset_mibs",
++ .description = "Reset all MIB counters",
++ .set = ar8xxx_sw_set_reset_mibs,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_mirror_rx",
++ .description = "Enable mirroring of RX packets",
++ .set = ar8xxx_sw_set_mirror_rx_enable,
++ .get = ar8xxx_sw_get_mirror_rx_enable,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_mirror_tx",
++ .description = "Enable mirroring of TX packets",
++ .set = ar8xxx_sw_set_mirror_tx_enable,
++ .get = ar8xxx_sw_get_mirror_tx_enable,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "mirror_monitor_port",
++ .description = "Mirror monitor port",
++ .set = ar8xxx_sw_set_mirror_monitor_port,
++ .get = ar8xxx_sw_get_mirror_monitor_port,
++ .max = AR8216_NUM_PORTS - 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "mirror_source_port",
++ .description = "Mirror source port",
++ .set = ar8xxx_sw_set_mirror_source_port,
++ .get = ar8xxx_sw_get_mirror_source_port,
++ .max = AR8216_NUM_PORTS - 1
++ },
++ {
++ .type = SWITCH_TYPE_STRING,
++ .name = "arl_table",
++ .description = "Get ARL table",
++ .set = NULL,
++ .get = ar8xxx_sw_get_arl_table,
++ },
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "flush_arl_table",
++ .description = "Flush ARL table",
++ .set = ar8xxx_sw_set_flush_arl_table,
++ },
++};
++
++const struct switch_attr ar8xxx_sw_attr_port[] = {
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "reset_mib",
++ .description = "Reset single port MIB counters",
++ .set = ar8xxx_sw_set_port_reset_mib,
++ },
++ {
++ .type = SWITCH_TYPE_STRING,
++ .name = "mib",
++ .description = "Get port's MIB counters",
++ .set = NULL,
++ .get = ar8xxx_sw_get_port_mib,
++ },
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "flush_arl_table",
++ .description = "Flush port's ARL table entries",
++ .set = ar8xxx_sw_set_flush_port_arl_table,
++ },
++};
++
++const struct switch_attr ar8xxx_sw_attr_vlan[1] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "vid",
++ .description = "VLAN ID (0-4094)",
++ .set = ar8xxx_sw_set_vid,
++ .get = ar8xxx_sw_get_vid,
++ .max = 4094,
++ },
++};
++
++static const struct switch_dev_ops ar8xxx_sw_ops = {
++ .attr_global = {
++ .attr = ar8xxx_sw_attr_globals,
++ .n_attr = ARRAY_SIZE(ar8xxx_sw_attr_globals),
++ },
++ .attr_port = {
++ .attr = ar8xxx_sw_attr_port,
++ .n_attr = ARRAY_SIZE(ar8xxx_sw_attr_port),
++ },
++ .attr_vlan = {
++ .attr = ar8xxx_sw_attr_vlan,
++ .n_attr = ARRAY_SIZE(ar8xxx_sw_attr_vlan),
++ },
++ .get_port_pvid = ar8xxx_sw_get_pvid,
++ .set_port_pvid = ar8xxx_sw_set_pvid,
++ .get_vlan_ports = ar8xxx_sw_get_ports,
++ .set_vlan_ports = ar8xxx_sw_set_ports,
++ .apply_config = ar8xxx_sw_hw_apply,
++ .reset_switch = ar8xxx_sw_reset_switch,
++ .get_port_link = ar8xxx_sw_get_port_link,
++};
++
++static const struct ar8xxx_chip ar8216_chip = {
++ .caps = AR8XXX_CAP_MIB_COUNTERS,
++
++ .reg_port_stats_start = 0x19000,
++ .reg_port_stats_length = 0xa0,
++
++ .name = "Atheros AR8216",
++ .ports = AR8216_NUM_PORTS,
++ .vlans = AR8216_NUM_VLANS,
++ .swops = &ar8xxx_sw_ops,
++
++ .hw_init = ar8216_hw_init,
++ .init_globals = ar8216_init_globals,
++ .init_port = ar8216_init_port,
++ .setup_port = ar8216_setup_port,
++ .read_port_status = ar8216_read_port_status,
++ .atu_flush = ar8216_atu_flush,
++ .atu_flush_port = ar8216_atu_flush_port,
++ .vtu_flush = ar8216_vtu_flush,
++ .vtu_load_vlan = ar8216_vtu_load_vlan,
++ .set_mirror_regs = ar8216_set_mirror_regs,
++ .get_arl_entry = ar8216_get_arl_entry,
++ .sw_hw_apply = ar8xxx_sw_hw_apply,
++
++ .num_mibs = ARRAY_SIZE(ar8216_mibs),
++ .mib_decs = ar8216_mibs,
++ .mib_func = AR8216_REG_MIB_FUNC
++};
++
++static const struct ar8xxx_chip ar8236_chip = {
++ .caps = AR8XXX_CAP_MIB_COUNTERS,
++
++ .reg_port_stats_start = 0x20000,
++ .reg_port_stats_length = 0x100,
++
++ .name = "Atheros AR8236",
++ .ports = AR8216_NUM_PORTS,
++ .vlans = AR8216_NUM_VLANS,
++ .swops = &ar8xxx_sw_ops,
++
++ .hw_init = ar8216_hw_init,
++ .init_globals = ar8236_init_globals,
++ .init_port = ar8216_init_port,
++ .setup_port = ar8236_setup_port,
++ .read_port_status = ar8216_read_port_status,
++ .atu_flush = ar8216_atu_flush,
++ .atu_flush_port = ar8216_atu_flush_port,
++ .vtu_flush = ar8216_vtu_flush,
++ .vtu_load_vlan = ar8216_vtu_load_vlan,
++ .set_mirror_regs = ar8216_set_mirror_regs,
++ .get_arl_entry = ar8216_get_arl_entry,
++ .sw_hw_apply = ar8xxx_sw_hw_apply,
++
++ .num_mibs = ARRAY_SIZE(ar8236_mibs),
++ .mib_decs = ar8236_mibs,
++ .mib_func = AR8216_REG_MIB_FUNC
++};
++
++static const struct ar8xxx_chip ar8316_chip = {
++ .caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
++
++ .reg_port_stats_start = 0x20000,
++ .reg_port_stats_length = 0x100,
++
++ .name = "Atheros AR8316",
++ .ports = AR8216_NUM_PORTS,
++ .vlans = AR8X16_MAX_VLANS,
++ .swops = &ar8xxx_sw_ops,
++
++ .hw_init = ar8316_hw_init,
++ .init_globals = ar8316_init_globals,
++ .init_port = ar8216_init_port,
++ .setup_port = ar8216_setup_port,
++ .read_port_status = ar8216_read_port_status,
++ .atu_flush = ar8216_atu_flush,
++ .atu_flush_port = ar8216_atu_flush_port,
++ .vtu_flush = ar8216_vtu_flush,
++ .vtu_load_vlan = ar8216_vtu_load_vlan,
++ .set_mirror_regs = ar8216_set_mirror_regs,
++ .get_arl_entry = ar8216_get_arl_entry,
++ .sw_hw_apply = ar8xxx_sw_hw_apply,
++
++ .num_mibs = ARRAY_SIZE(ar8236_mibs),
++ .mib_decs = ar8236_mibs,
++ .mib_func = AR8216_REG_MIB_FUNC
++};
++
++static int
++ar8xxx_id_chip(struct ar8xxx_priv *priv)
++{
++ u32 val;
++ u16 id;
++ int i;
++
++ val = ar8xxx_read(priv, AR8216_REG_CTRL);
++ if (val == ~0)
++ return -ENODEV;
++
++ id = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
++ for (i = 0; i < AR8X16_PROBE_RETRIES; i++) {
++ u16 t;
++
++ val = ar8xxx_read(priv, AR8216_REG_CTRL);
++ if (val == ~0)
++ return -ENODEV;
++
++ t = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
++ if (t != id)
++ return -ENODEV;
++ }
++
++ priv->chip_ver = (id & AR8216_CTRL_VERSION) >> AR8216_CTRL_VERSION_S;
++ priv->chip_rev = (id & AR8216_CTRL_REVISION);
++
++ switch (priv->chip_ver) {
++ case AR8XXX_VER_AR8216:
++ priv->chip = &ar8216_chip;
++ break;
++ case AR8XXX_VER_AR8236:
++ priv->chip = &ar8236_chip;
++ break;
++ case AR8XXX_VER_AR8316:
++ priv->chip = &ar8316_chip;
++ break;
++ case AR8XXX_VER_AR8327:
++ priv->chip = &ar8327_chip;
++ break;
++ case AR8XXX_VER_AR8337:
++ priv->chip = &ar8337_chip;
++ break;
++ default:
++ pr_err("ar8216: Unknown Atheros device [ver=%d, rev=%d]\n",
++ priv->chip_ver, priv->chip_rev);
++
++ return -ENODEV;
++ }
++
++ return 0;
++}
++
++static void
++ar8xxx_mib_work_func(struct work_struct *work)
++{
++ struct ar8xxx_priv *priv;
++ int err;
++
++ priv = container_of(work, struct ar8xxx_priv, mib_work.work);
++
++ mutex_lock(&priv->mib_lock);
++
++ err = ar8xxx_mib_capture(priv);
++ if (err)
++ goto next_port;
++
++ ar8xxx_mib_fetch_port_stat(priv, priv->mib_next_port, false);
++
++next_port:
++ priv->mib_next_port++;
++ if (priv->mib_next_port >= priv->dev.ports)
++ priv->mib_next_port = 0;
++
++ mutex_unlock(&priv->mib_lock);
++ schedule_delayed_work(&priv->mib_work,
++ msecs_to_jiffies(AR8XXX_MIB_WORK_DELAY));
++}
++
++static int
++ar8xxx_mib_init(struct ar8xxx_priv *priv)
++{
++ unsigned int len;
++
++ if (!ar8xxx_has_mib_counters(priv))
++ return 0;
++
++ BUG_ON(!priv->chip->mib_decs || !priv->chip->num_mibs);
++
++ len = priv->dev.ports * priv->chip->num_mibs *
++ sizeof(*priv->mib_stats);
++ priv->mib_stats = kzalloc(len, GFP_KERNEL);
++
++ if (!priv->mib_stats)
++ return -ENOMEM;
++
++ return 0;
++}
++
++static void
++ar8xxx_mib_start(struct ar8xxx_priv *priv)
++{
++ if (!ar8xxx_has_mib_counters(priv))
++ return;
++
++ schedule_delayed_work(&priv->mib_work,
++ msecs_to_jiffies(AR8XXX_MIB_WORK_DELAY));
++}
++
++static void
++ar8xxx_mib_stop(struct ar8xxx_priv *priv)
++{
++ if (!ar8xxx_has_mib_counters(priv))
++ return;
++
++ cancel_delayed_work(&priv->mib_work);
++}
++
++static struct ar8xxx_priv *
++ar8xxx_create(void)
++{
++ struct ar8xxx_priv *priv;
++
++ priv = kzalloc(sizeof(struct ar8xxx_priv), GFP_KERNEL);
++ if (priv == NULL)
++ return NULL;
++
++ mutex_init(&priv->reg_mutex);
++ mutex_init(&priv->mib_lock);
++ INIT_DELAYED_WORK(&priv->mib_work, ar8xxx_mib_work_func);
++
++ return priv;
++}
++
++static void
++ar8xxx_free(struct ar8xxx_priv *priv)
++{
++ if (priv->chip && priv->chip->cleanup)
++ priv->chip->cleanup(priv);
++
++ kfree(priv->chip_data);
++ kfree(priv->mib_stats);
++ kfree(priv);
++}
++
++static int
++ar8xxx_probe_switch(struct ar8xxx_priv *priv)
++{
++ const struct ar8xxx_chip *chip;
++ struct switch_dev *swdev;
++ int ret;
++
++ ret = ar8xxx_id_chip(priv);
++ if (ret)
++ return ret;
++
++ chip = priv->chip;
++
++ swdev = &priv->dev;
++ swdev->cpu_port = AR8216_PORT_CPU;
++ swdev->name = chip->name;
++ swdev->vlans = chip->vlans;
++ swdev->ports = chip->ports;
++ swdev->ops = chip->swops;
++
++ ret = ar8xxx_mib_init(priv);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int
++ar8xxx_start(struct ar8xxx_priv *priv)
++{
++ int ret;
++
++ priv->init = true;
++
++ ret = priv->chip->hw_init(priv);
++ if (ret)
++ return ret;
++
++ ret = ar8xxx_sw_reset_switch(&priv->dev);
++ if (ret)
++ return ret;
++
++ priv->init = false;
++
++ ar8xxx_mib_start(priv);
++
++ return 0;
++}
++
++static int
++ar8xxx_phy_config_init(struct phy_device *phydev)
++{
++ struct ar8xxx_priv *priv = phydev->priv;
++ struct net_device *dev = phydev->attached_dev;
++ int ret;
++
++ if (WARN_ON(!priv))
++ return -ENODEV;
++
++ if (priv->chip->config_at_probe)
++ return ar8xxx_phy_check_aneg(phydev);
++
++ priv->phy = phydev;
++
++ if (phydev->addr != 0) {
++ if (chip_is_ar8316(priv)) {
++ /* switch device has been initialized, reinit */
++ priv->dev.ports = (AR8216_NUM_PORTS - 1);
++ priv->initialized = false;
++ priv->port4_phy = true;
++ ar8316_hw_init(priv);
++ return 0;
++ }
++
++ return 0;
++ }
++
++ ret = ar8xxx_start(priv);
++ if (ret)
++ return ret;
++
++ /* VID fixup only needed on ar8216 */
++ if (chip_is_ar8216(priv)) {
++ dev->phy_ptr = priv;
++ dev->priv_flags |= IFF_NO_IP_ALIGN;
++ dev->eth_mangle_rx = ar8216_mangle_rx;
++ dev->eth_mangle_tx = ar8216_mangle_tx;
++ }
++
++ return 0;
++}
++
++static bool
++ar8xxx_check_link_states(struct ar8xxx_priv *priv)
++{
++ bool link_new, changed = false;
++ u32 status;
++ int i;
++
++ mutex_lock(&priv->reg_mutex);
++
++ for (i = 0; i < priv->dev.ports; i++) {
++ status = priv->chip->read_port_status(priv, i);
++ link_new = !!(status & AR8216_PORT_STATUS_LINK_UP);
++ if (link_new == priv->link_up[i])
++ continue;
++
++ priv->link_up[i] = link_new;
++ changed = true;
++ /* flush ARL entries for this port if it went down*/
++ if (!link_new)
++ priv->chip->atu_flush_port(priv, i);
++ dev_info(&priv->phy->dev, "Port %d is %s\n",
++ i, link_new ? "up" : "down");
++ }
++
++ mutex_unlock(&priv->reg_mutex);
++
++ return changed;
++}
++
++static int
++ar8xxx_phy_read_status(struct phy_device *phydev)
++{
++ struct ar8xxx_priv *priv = phydev->priv;
++ struct switch_port_link link;
++
++ /* check for switch port link changes */
++ if (phydev->state == PHY_CHANGELINK)
++ ar8xxx_check_link_states(priv);
++
++ if (phydev->addr != 0)
++ return genphy_read_status(phydev);
++
++ ar8216_read_port_link(priv, phydev->addr, &link);
++ phydev->link = !!link.link;
++ if (!phydev->link)
++ return 0;
++
++ switch (link.speed) {
++ case SWITCH_PORT_SPEED_10:
++ phydev->speed = SPEED_10;
++ break;
++ case SWITCH_PORT_SPEED_100:
++ phydev->speed = SPEED_100;
++ break;
++ case SWITCH_PORT_SPEED_1000:
++ phydev->speed = SPEED_1000;
++ break;
++ default:
++ phydev->speed = 0;
++ }
++ phydev->duplex = link.duplex ? DUPLEX_FULL : DUPLEX_HALF;
++
++ phydev->state = PHY_RUNNING;
++ netif_carrier_on(phydev->attached_dev);
++ phydev->adjust_link(phydev->attached_dev);
++
++ return 0;
++}
++
++static int
++ar8xxx_phy_config_aneg(struct phy_device *phydev)
++{
++ if (phydev->addr == 0)
++ return 0;
++
++ return genphy_config_aneg(phydev);
++}
++
++static const u32 ar8xxx_phy_ids[] = {
++ 0x004dd033,
++ 0x004dd034, /* AR8327 */
++ 0x004dd036, /* AR8337 */
++ 0x004dd041,
++ 0x004dd042,
++ 0x004dd043, /* AR8236 */
++};
++
++static bool
++ar8xxx_phy_match(u32 phy_id)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(ar8xxx_phy_ids); i++)
++ if (phy_id == ar8xxx_phy_ids[i])
++ return true;
++
++ return false;
++}
++
++static bool
++ar8xxx_is_possible(struct mii_bus *bus)
++{
++ unsigned i;
++
++ for (i = 0; i < 4; i++) {
++ u32 phy_id;
++
++ phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16;
++ phy_id |= mdiobus_read(bus, i, MII_PHYSID2);
++ if (!ar8xxx_phy_match(phy_id)) {
++ pr_debug("ar8xxx: unknown PHY at %s:%02x id:%08x\n",
++ dev_name(&bus->dev), i, phy_id);
++ return false;
++ }
++ }
++
++ return true;
++}
++
++static int
++ar8xxx_phy_probe(struct phy_device *phydev)
++{
++ struct ar8xxx_priv *priv;
++ struct switch_dev *swdev;
++ int ret;
++
++ /* skip PHYs at unused adresses */
++ if (phydev->addr != 0 && phydev->addr != 4)
++ return -ENODEV;
++
++ if (!ar8xxx_is_possible(phydev->bus))
++ return -ENODEV;
++
++ mutex_lock(&ar8xxx_dev_list_lock);
++ list_for_each_entry(priv, &ar8xxx_dev_list, list)
++ if (priv->mii_bus == phydev->bus)
++ goto found;
++
++ priv = ar8xxx_create();
++ if (priv == NULL) {
++ ret = -ENOMEM;
++ goto unlock;
++ }
++
++ priv->mii_bus = phydev->bus;
++
++ ret = ar8xxx_probe_switch(priv);
++ if (ret)
++ goto free_priv;
++
++ swdev = &priv->dev;
++ swdev->alias = dev_name(&priv->mii_bus->dev);
++ ret = register_switch(swdev, NULL);
++ if (ret)
++ goto free_priv;
++
++ pr_info("%s: %s rev. %u switch registered on %s\n",
++ swdev->devname, swdev->name, priv->chip_rev,
++ dev_name(&priv->mii_bus->dev));
++
++found:
++ priv->use_count++;
++
++ if (phydev->addr == 0) {
++ if (ar8xxx_has_gige(priv)) {
++ phydev->supported = SUPPORTED_1000baseT_Full;
++ phydev->advertising = ADVERTISED_1000baseT_Full;
++ } else {
++ phydev->supported = SUPPORTED_100baseT_Full;
++ phydev->advertising = ADVERTISED_100baseT_Full;
++ }
++
++ if (priv->chip->config_at_probe) {
++ priv->phy = phydev;
++
++ ret = ar8xxx_start(priv);
++ if (ret)
++ goto err_unregister_switch;
++ }
++ } else {
++ if (ar8xxx_has_gige(priv)) {
++ phydev->supported |= SUPPORTED_1000baseT_Full;
++ phydev->advertising |= ADVERTISED_1000baseT_Full;
++ }
++ }
++
++ phydev->priv = priv;
++
++ list_add(&priv->list, &ar8xxx_dev_list);
++
++ mutex_unlock(&ar8xxx_dev_list_lock);
++
++ return 0;
++
++err_unregister_switch:
++ if (--priv->use_count)
++ goto unlock;
++
++ unregister_switch(&priv->dev);
++
++free_priv:
++ ar8xxx_free(priv);
++unlock:
++ mutex_unlock(&ar8xxx_dev_list_lock);
++ return ret;
++}
++
++static void
++ar8xxx_phy_remove(struct phy_device *phydev)
++{
++ struct ar8xxx_priv *priv = phydev->priv;
++
++ if (WARN_ON(!priv))
++ return;
++
++ phydev->priv = NULL;
++ if (--priv->use_count > 0)
++ return;
++
++ mutex_lock(&ar8xxx_dev_list_lock);
++ list_del(&priv->list);
++ mutex_unlock(&ar8xxx_dev_list_lock);
++
++ unregister_switch(&priv->dev);
++ ar8xxx_mib_stop(priv);
++ ar8xxx_free(priv);
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)
++static int
++ar8xxx_phy_soft_reset(struct phy_device *phydev)
++{
++ /* we don't need an extra reset */
++ return 0;
++}
++#endif
++
++static struct phy_driver ar8xxx_phy_driver = {
++ .phy_id = 0x004d0000,
++ .name = "Atheros AR8216/AR8236/AR8316",
++ .phy_id_mask = 0xffff0000,
++ .features = PHY_BASIC_FEATURES,
++ .probe = ar8xxx_phy_probe,
++ .remove = ar8xxx_phy_remove,
++ .config_init = ar8xxx_phy_config_init,
++ .config_aneg = ar8xxx_phy_config_aneg,
++ .read_status = ar8xxx_phy_read_status,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)
++ .soft_reset = ar8xxx_phy_soft_reset,
++#endif
++ .driver = { .owner = THIS_MODULE },
++};
++
++int __init
++ar8xxx_init(void)
++{
++ return phy_driver_register(&ar8xxx_phy_driver);
++}
++
++void __exit
++ar8xxx_exit(void)
++{
++ phy_driver_unregister(&ar8xxx_phy_driver);
++}
++
++module_init(ar8xxx_init);
++module_exit(ar8xxx_exit);
++MODULE_LICENSE("GPL");
++
+diff -Nur linux-4.1.6.orig/drivers/net/phy/ar8216.h linux-4.1.6/drivers/net/phy/ar8216.h
+--- linux-4.1.6.orig/drivers/net/phy/ar8216.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/ar8216.h 2015-09-13 22:55:18.327374229 +0200
+@@ -0,0 +1,628 @@
++/*
++ * ar8216.h: AR8216 switch driver
++ *
++ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __AR8216_H
++#define __AR8216_H
++
++#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s)
++
++#define AR8XXX_CAP_GIGE BIT(0)
++#define AR8XXX_CAP_MIB_COUNTERS BIT(1)
++
++#define AR8XXX_NUM_PHYS 5
++#define AR8216_PORT_CPU 0
++#define AR8216_NUM_PORTS 6
++#define AR8216_NUM_VLANS 16
++#define AR8316_NUM_VLANS 4096
++
++/* size of the vlan table */
++#define AR8X16_MAX_VLANS 128
++#define AR8X16_PROBE_RETRIES 10
++#define AR8X16_MAX_PORTS 8
++
++/* Atheros specific MII registers */
++#define MII_ATH_MMD_ADDR 0x0d
++#define MII_ATH_MMD_DATA 0x0e
++#define MII_ATH_DBG_ADDR 0x1d
++#define MII_ATH_DBG_DATA 0x1e
++
++#define AR8216_REG_CTRL 0x0000
++#define AR8216_CTRL_REVISION BITS(0, 8)
++#define AR8216_CTRL_REVISION_S 0
++#define AR8216_CTRL_VERSION BITS(8, 8)
++#define AR8216_CTRL_VERSION_S 8
++#define AR8216_CTRL_RESET BIT(31)
++
++#define AR8216_REG_FLOOD_MASK 0x002C
++#define AR8216_FM_UNI_DEST_PORTS BITS(0, 6)
++#define AR8216_FM_MULTI_DEST_PORTS BITS(16, 6)
++#define AR8236_FM_CPU_BROADCAST_EN BIT(26)
++#define AR8236_FM_CPU_BCAST_FWD_EN BIT(25)
++
++#define AR8216_REG_GLOBAL_CTRL 0x0030
++#define AR8216_GCTRL_MTU BITS(0, 11)
++#define AR8236_GCTRL_MTU BITS(0, 14)
++#define AR8316_GCTRL_MTU BITS(0, 14)
++
++#define AR8216_REG_VTU 0x0040
++#define AR8216_VTU_OP BITS(0, 3)
++#define AR8216_VTU_OP_NOOP 0x0
++#define AR8216_VTU_OP_FLUSH 0x1
++#define AR8216_VTU_OP_LOAD 0x2
++#define AR8216_VTU_OP_PURGE 0x3
++#define AR8216_VTU_OP_REMOVE_PORT 0x4
++#define AR8216_VTU_ACTIVE BIT(3)
++#define AR8216_VTU_FULL BIT(4)
++#define AR8216_VTU_PORT BITS(8, 4)
++#define AR8216_VTU_PORT_S 8
++#define AR8216_VTU_VID BITS(16, 12)
++#define AR8216_VTU_VID_S 16
++#define AR8216_VTU_PRIO BITS(28, 3)
++#define AR8216_VTU_PRIO_S 28
++#define AR8216_VTU_PRIO_EN BIT(31)
++
++#define AR8216_REG_VTU_DATA 0x0044
++#define AR8216_VTUDATA_MEMBER BITS(0, 10)
++#define AR8236_VTUDATA_MEMBER BITS(0, 7)
++#define AR8216_VTUDATA_VALID BIT(11)
++
++#define AR8216_REG_ATU_FUNC0 0x0050
++#define AR8216_ATU_OP BITS(0, 3)
++#define AR8216_ATU_OP_NOOP 0x0
++#define AR8216_ATU_OP_FLUSH 0x1
++#define AR8216_ATU_OP_LOAD 0x2
++#define AR8216_ATU_OP_PURGE 0x3
++#define AR8216_ATU_OP_FLUSH_UNLOCKED 0x4
++#define AR8216_ATU_OP_FLUSH_PORT 0x5
++#define AR8216_ATU_OP_GET_NEXT 0x6
++#define AR8216_ATU_ACTIVE BIT(3)
++#define AR8216_ATU_PORT_NUM BITS(8, 4)
++#define AR8216_ATU_PORT_NUM_S 8
++#define AR8216_ATU_FULL_VIO BIT(12)
++#define AR8216_ATU_ADDR5 BITS(16, 8)
++#define AR8216_ATU_ADDR5_S 16
++#define AR8216_ATU_ADDR4 BITS(24, 8)
++#define AR8216_ATU_ADDR4_S 24
++
++#define AR8216_REG_ATU_FUNC1 0x0054
++#define AR8216_ATU_ADDR3 BITS(0, 8)
++#define AR8216_ATU_ADDR3_S 0
++#define AR8216_ATU_ADDR2 BITS(8, 8)
++#define AR8216_ATU_ADDR2_S 8
++#define AR8216_ATU_ADDR1 BITS(16, 8)
++#define AR8216_ATU_ADDR1_S 16
++#define AR8216_ATU_ADDR0 BITS(24, 8)
++#define AR8216_ATU_ADDR0_S 24
++
++#define AR8216_REG_ATU_FUNC2 0x0058
++#define AR8216_ATU_PORTS BITS(0, 6)
++#define AR8216_ATU_PORT0 BIT(0)
++#define AR8216_ATU_PORT1 BIT(1)
++#define AR8216_ATU_PORT2 BIT(2)
++#define AR8216_ATU_PORT3 BIT(3)
++#define AR8216_ATU_PORT4 BIT(4)
++#define AR8216_ATU_PORT5 BIT(5)
++#define AR8216_ATU_STATUS BITS(16, 4)
++#define AR8216_ATU_STATUS_S 16
++
++#define AR8216_REG_ATU_CTRL 0x005C
++#define AR8216_ATU_CTRL_AGE_EN BIT(17)
++#define AR8216_ATU_CTRL_AGE_TIME BITS(0, 16)
++#define AR8216_ATU_CTRL_AGE_TIME_S 0
++#define AR8236_ATU_CTRL_RES BIT(20)
++
++#define AR8216_REG_MIB_FUNC 0x0080
++#define AR8216_MIB_TIMER BITS(0, 16)
++#define AR8216_MIB_AT_HALF_EN BIT(16)
++#define AR8216_MIB_BUSY BIT(17)
++#define AR8216_MIB_FUNC BITS(24, 3)
++#define AR8216_MIB_FUNC_S 24
++#define AR8216_MIB_FUNC_NO_OP 0x0
++#define AR8216_MIB_FUNC_FLUSH 0x1
++#define AR8216_MIB_FUNC_CAPTURE 0x3
++#define AR8236_MIB_EN BIT(30)
++
++#define AR8216_REG_GLOBAL_CPUPORT 0x0078
++#define AR8216_GLOBAL_CPUPORT_MIRROR_PORT BITS(4, 4)
++#define AR8216_GLOBAL_CPUPORT_MIRROR_PORT_S 4
++
++#define AR8216_PORT_OFFSET(_i) (0x0100 * (_i + 1))
++#define AR8216_REG_PORT_STATUS(_i) (AR8216_PORT_OFFSET(_i) + 0x0000)
++#define AR8216_PORT_STATUS_SPEED BITS(0,2)
++#define AR8216_PORT_STATUS_SPEED_S 0
++#define AR8216_PORT_STATUS_TXMAC BIT(2)
++#define AR8216_PORT_STATUS_RXMAC BIT(3)
++#define AR8216_PORT_STATUS_TXFLOW BIT(4)
++#define AR8216_PORT_STATUS_RXFLOW BIT(5)
++#define AR8216_PORT_STATUS_DUPLEX BIT(6)
++#define AR8216_PORT_STATUS_LINK_UP BIT(8)
++#define AR8216_PORT_STATUS_LINK_AUTO BIT(9)
++#define AR8216_PORT_STATUS_LINK_PAUSE BIT(10)
++
++#define AR8216_REG_PORT_CTRL(_i) (AR8216_PORT_OFFSET(_i) + 0x0004)
++
++/* port forwarding state */
++#define AR8216_PORT_CTRL_STATE BITS(0, 3)
++#define AR8216_PORT_CTRL_STATE_S 0
++
++#define AR8216_PORT_CTRL_LEARN_LOCK BIT(7)
++
++/* egress 802.1q mode */
++#define AR8216_PORT_CTRL_VLAN_MODE BITS(8, 2)
++#define AR8216_PORT_CTRL_VLAN_MODE_S 8
++
++#define AR8216_PORT_CTRL_IGMP_SNOOP BIT(10)
++#define AR8216_PORT_CTRL_HEADER BIT(11)
++#define AR8216_PORT_CTRL_MAC_LOOP BIT(12)
++#define AR8216_PORT_CTRL_SINGLE_VLAN BIT(13)
++#define AR8216_PORT_CTRL_LEARN BIT(14)
++#define AR8216_PORT_CTRL_MIRROR_TX BIT(16)
++#define AR8216_PORT_CTRL_MIRROR_RX BIT(17)
++
++#define AR8216_REG_PORT_VLAN(_i) (AR8216_PORT_OFFSET(_i) + 0x0008)
++
++#define AR8216_PORT_VLAN_DEFAULT_ID BITS(0, 12)
++#define AR8216_PORT_VLAN_DEFAULT_ID_S 0
++
++#define AR8216_PORT_VLAN_DEST_PORTS BITS(16, 9)
++#define AR8216_PORT_VLAN_DEST_PORTS_S 16
++
++/* bit0 added to the priority field of egress frames */
++#define AR8216_PORT_VLAN_TX_PRIO BIT(27)
++
++/* port default priority */
++#define AR8216_PORT_VLAN_PRIORITY BITS(28, 2)
++#define AR8216_PORT_VLAN_PRIORITY_S 28
++
++/* ingress 802.1q mode */
++#define AR8216_PORT_VLAN_MODE BITS(30, 2)
++#define AR8216_PORT_VLAN_MODE_S 30
++
++#define AR8216_REG_PORT_RATE(_i) (AR8216_PORT_OFFSET(_i) + 0x000c)
++#define AR8216_REG_PORT_PRIO(_i) (AR8216_PORT_OFFSET(_i) + 0x0010)
++
++#define AR8216_STATS_RXBROAD 0x00
++#define AR8216_STATS_RXPAUSE 0x04
++#define AR8216_STATS_RXMULTI 0x08
++#define AR8216_STATS_RXFCSERR 0x0c
++#define AR8216_STATS_RXALIGNERR 0x10
++#define AR8216_STATS_RXRUNT 0x14
++#define AR8216_STATS_RXFRAGMENT 0x18
++#define AR8216_STATS_RX64BYTE 0x1c
++#define AR8216_STATS_RX128BYTE 0x20
++#define AR8216_STATS_RX256BYTE 0x24
++#define AR8216_STATS_RX512BYTE 0x28
++#define AR8216_STATS_RX1024BYTE 0x2c
++#define AR8216_STATS_RXMAXBYTE 0x30
++#define AR8216_STATS_RXTOOLONG 0x34
++#define AR8216_STATS_RXGOODBYTE 0x38
++#define AR8216_STATS_RXBADBYTE 0x40
++#define AR8216_STATS_RXOVERFLOW 0x48
++#define AR8216_STATS_FILTERED 0x4c
++#define AR8216_STATS_TXBROAD 0x50
++#define AR8216_STATS_TXPAUSE 0x54
++#define AR8216_STATS_TXMULTI 0x58
++#define AR8216_STATS_TXUNDERRUN 0x5c
++#define AR8216_STATS_TX64BYTE 0x60
++#define AR8216_STATS_TX128BYTE 0x64
++#define AR8216_STATS_TX256BYTE 0x68
++#define AR8216_STATS_TX512BYTE 0x6c
++#define AR8216_STATS_TX1024BYTE 0x70
++#define AR8216_STATS_TXMAXBYTE 0x74
++#define AR8216_STATS_TXOVERSIZE 0x78
++#define AR8216_STATS_TXBYTE 0x7c
++#define AR8216_STATS_TXCOLLISION 0x84
++#define AR8216_STATS_TXABORTCOL 0x88
++#define AR8216_STATS_TXMULTICOL 0x8c
++#define AR8216_STATS_TXSINGLECOL 0x90
++#define AR8216_STATS_TXEXCDEFER 0x94
++#define AR8216_STATS_TXDEFER 0x98
++#define AR8216_STATS_TXLATECOL 0x9c
++
++#define AR8236_REG_PORT_VLAN(_i) (AR8216_PORT_OFFSET((_i)) + 0x0008)
++#define AR8236_PORT_VLAN_DEFAULT_ID BITS(16, 12)
++#define AR8236_PORT_VLAN_DEFAULT_ID_S 16
++#define AR8236_PORT_VLAN_PRIORITY BITS(29, 3)
++#define AR8236_PORT_VLAN_PRIORITY_S 28
++
++#define AR8236_REG_PORT_VLAN2(_i) (AR8216_PORT_OFFSET((_i)) + 0x000c)
++#define AR8236_PORT_VLAN2_MEMBER BITS(16, 7)
++#define AR8236_PORT_VLAN2_MEMBER_S 16
++#define AR8236_PORT_VLAN2_TX_PRIO BIT(23)
++#define AR8236_PORT_VLAN2_VLAN_MODE BITS(30, 2)
++#define AR8236_PORT_VLAN2_VLAN_MODE_S 30
++
++#define AR8236_STATS_RXBROAD 0x00
++#define AR8236_STATS_RXPAUSE 0x04
++#define AR8236_STATS_RXMULTI 0x08
++#define AR8236_STATS_RXFCSERR 0x0c
++#define AR8236_STATS_RXALIGNERR 0x10
++#define AR8236_STATS_RXRUNT 0x14
++#define AR8236_STATS_RXFRAGMENT 0x18
++#define AR8236_STATS_RX64BYTE 0x1c
++#define AR8236_STATS_RX128BYTE 0x20
++#define AR8236_STATS_RX256BYTE 0x24
++#define AR8236_STATS_RX512BYTE 0x28
++#define AR8236_STATS_RX1024BYTE 0x2c
++#define AR8236_STATS_RX1518BYTE 0x30
++#define AR8236_STATS_RXMAXBYTE 0x34
++#define AR8236_STATS_RXTOOLONG 0x38
++#define AR8236_STATS_RXGOODBYTE 0x3c
++#define AR8236_STATS_RXBADBYTE 0x44
++#define AR8236_STATS_RXOVERFLOW 0x4c
++#define AR8236_STATS_FILTERED 0x50
++#define AR8236_STATS_TXBROAD 0x54
++#define AR8236_STATS_TXPAUSE 0x58
++#define AR8236_STATS_TXMULTI 0x5c
++#define AR8236_STATS_TXUNDERRUN 0x60
++#define AR8236_STATS_TX64BYTE 0x64
++#define AR8236_STATS_TX128BYTE 0x68
++#define AR8236_STATS_TX256BYTE 0x6c
++#define AR8236_STATS_TX512BYTE 0x70
++#define AR8236_STATS_TX1024BYTE 0x74
++#define AR8236_STATS_TX1518BYTE 0x78
++#define AR8236_STATS_TXMAXBYTE 0x7c
++#define AR8236_STATS_TXOVERSIZE 0x80
++#define AR8236_STATS_TXBYTE 0x84
++#define AR8236_STATS_TXCOLLISION 0x8c
++#define AR8236_STATS_TXABORTCOL 0x90
++#define AR8236_STATS_TXMULTICOL 0x94
++#define AR8236_STATS_TXSINGLECOL 0x98
++#define AR8236_STATS_TXEXCDEFER 0x9c
++#define AR8236_STATS_TXDEFER 0xa0
++#define AR8236_STATS_TXLATECOL 0xa4
++
++#define AR8316_REG_POSTRIP 0x0008
++#define AR8316_POSTRIP_MAC0_GMII_EN BIT(0)
++#define AR8316_POSTRIP_MAC0_RGMII_EN BIT(1)
++#define AR8316_POSTRIP_PHY4_GMII_EN BIT(2)
++#define AR8316_POSTRIP_PHY4_RGMII_EN BIT(3)
++#define AR8316_POSTRIP_MAC0_MAC_MODE BIT(4)
++#define AR8316_POSTRIP_RTL_MODE BIT(5)
++#define AR8316_POSTRIP_RGMII_RXCLK_DELAY_EN BIT(6)
++#define AR8316_POSTRIP_RGMII_TXCLK_DELAY_EN BIT(7)
++#define AR8316_POSTRIP_SERDES_EN BIT(8)
++#define AR8316_POSTRIP_SEL_ANA_RST BIT(9)
++#define AR8316_POSTRIP_GATE_25M_EN BIT(10)
++#define AR8316_POSTRIP_SEL_CLK25M BIT(11)
++#define AR8316_POSTRIP_HIB_PULSE_HW BIT(12)
++#define AR8316_POSTRIP_DBG_MODE_I BIT(13)
++#define AR8316_POSTRIP_MAC5_MAC_MODE BIT(14)
++#define AR8316_POSTRIP_MAC5_PHY_MODE BIT(15)
++#define AR8316_POSTRIP_POWER_DOWN_HW BIT(16)
++#define AR8316_POSTRIP_LPW_STATE_EN BIT(17)
++#define AR8316_POSTRIP_MAN_EN BIT(18)
++#define AR8316_POSTRIP_PHY_PLL_ON BIT(19)
++#define AR8316_POSTRIP_LPW_EXIT BIT(20)
++#define AR8316_POSTRIP_TXDELAY_S0 BIT(21)
++#define AR8316_POSTRIP_TXDELAY_S1 BIT(22)
++#define AR8316_POSTRIP_RXDELAY_S0 BIT(23)
++#define AR8316_POSTRIP_LED_OPEN_EN BIT(24)
++#define AR8316_POSTRIP_SPI_EN BIT(25)
++#define AR8316_POSTRIP_RXDELAY_S1 BIT(26)
++#define AR8316_POSTRIP_POWER_ON_SEL BIT(31)
++
++/* port speed */
++enum {
++ AR8216_PORT_SPEED_10M = 0,
++ AR8216_PORT_SPEED_100M = 1,
++ AR8216_PORT_SPEED_1000M = 2,
++ AR8216_PORT_SPEED_ERR = 3,
++};
++
++/* ingress 802.1q mode */
++enum {
++ AR8216_IN_PORT_ONLY = 0,
++ AR8216_IN_PORT_FALLBACK = 1,
++ AR8216_IN_VLAN_ONLY = 2,
++ AR8216_IN_SECURE = 3
++};
++
++/* egress 802.1q mode */
++enum {
++ AR8216_OUT_KEEP = 0,
++ AR8216_OUT_STRIP_VLAN = 1,
++ AR8216_OUT_ADD_VLAN = 2
++};
++
++/* port forwarding state */
++enum {
++ AR8216_PORT_STATE_DISABLED = 0,
++ AR8216_PORT_STATE_BLOCK = 1,
++ AR8216_PORT_STATE_LISTEN = 2,
++ AR8216_PORT_STATE_LEARN = 3,
++ AR8216_PORT_STATE_FORWARD = 4
++};
++
++enum {
++ AR8XXX_VER_AR8216 = 0x01,
++ AR8XXX_VER_AR8236 = 0x03,
++ AR8XXX_VER_AR8316 = 0x10,
++ AR8XXX_VER_AR8327 = 0x12,
++ AR8XXX_VER_AR8337 = 0x13,
++};
++
++#define AR8XXX_NUM_ARL_RECORDS 100
++
++enum arl_op {
++ AR8XXX_ARL_INITIALIZE,
++ AR8XXX_ARL_GET_NEXT
++};
++
++struct arl_entry {
++ u8 port;
++ u8 mac[6];
++};
++
++struct ar8xxx_priv;
++
++struct ar8xxx_mib_desc {
++ unsigned int size;
++ unsigned int offset;
++ const char *name;
++};
++
++struct ar8xxx_chip {
++ unsigned long caps;
++ bool config_at_probe;
++ bool mii_lo_first;
++
++ /* parameters to calculate REG_PORT_STATS_BASE */
++ unsigned reg_port_stats_start;
++ unsigned reg_port_stats_length;
++
++ int (*hw_init)(struct ar8xxx_priv *priv);
++ void (*cleanup)(struct ar8xxx_priv *priv);
++
++ const char *name;
++ int vlans;
++ int ports;
++ const struct switch_dev_ops *swops;
++
++ void (*init_globals)(struct ar8xxx_priv *priv);
++ void (*init_port)(struct ar8xxx_priv *priv, int port);
++ void (*setup_port)(struct ar8xxx_priv *priv, int port, u32 members);
++ u32 (*read_port_status)(struct ar8xxx_priv *priv, int port);
++ u32 (*read_port_eee_status)(struct ar8xxx_priv *priv, int port);
++ int (*atu_flush)(struct ar8xxx_priv *priv);
++ int (*atu_flush_port)(struct ar8xxx_priv *priv, int port);
++ void (*vtu_flush)(struct ar8xxx_priv *priv);
++ void (*vtu_load_vlan)(struct ar8xxx_priv *priv, u32 vid, u32 port_mask);
++ void (*phy_fixup)(struct ar8xxx_priv *priv, int phy);
++ void (*set_mirror_regs)(struct ar8xxx_priv *priv);
++ void (*get_arl_entry)(struct ar8xxx_priv *priv, struct arl_entry *a,
++ u32 *status, enum arl_op op);
++ int (*sw_hw_apply)(struct switch_dev *dev);
++
++ const struct ar8xxx_mib_desc *mib_decs;
++ unsigned num_mibs;
++ unsigned mib_func;
++};
++
++struct ar8xxx_priv {
++ struct switch_dev dev;
++ struct mii_bus *mii_bus;
++ struct phy_device *phy;
++
++ int (*get_port_link)(unsigned port);
++
++ const struct net_device_ops *ndo_old;
++ struct net_device_ops ndo;
++ struct mutex reg_mutex;
++ u8 chip_ver;
++ u8 chip_rev;
++ const struct ar8xxx_chip *chip;
++ void *chip_data;
++ bool initialized;
++ bool port4_phy;
++ char buf[2048];
++ struct arl_entry arl_table[AR8XXX_NUM_ARL_RECORDS];
++ char arl_buf[AR8XXX_NUM_ARL_RECORDS * 32 + 256];
++ bool link_up[AR8X16_MAX_PORTS];
++
++ bool init;
++
++ struct mutex mib_lock;
++ struct delayed_work mib_work;
++ int mib_next_port;
++ u64 *mib_stats;
++
++ struct list_head list;
++ unsigned int use_count;
++
++ /* all fields below are cleared on reset */
++ bool vlan;
++ u16 vlan_id[AR8X16_MAX_VLANS];
++ u8 vlan_table[AR8X16_MAX_VLANS];
++ u8 vlan_tagged;
++ u16 pvid[AR8X16_MAX_PORTS];
++
++ /* mirroring */
++ bool mirror_rx;
++ bool mirror_tx;
++ int source_port;
++ int monitor_port;
++};
++
++u32
++ar8xxx_mii_read32(struct ar8xxx_priv *priv, int phy_id, int regnum);
++void
++ar8xxx_mii_write32(struct ar8xxx_priv *priv, int phy_id, int regnum, u32 val);
++u32
++ar8xxx_read(struct ar8xxx_priv *priv, int reg);
++void
++ar8xxx_write(struct ar8xxx_priv *priv, int reg, u32 val);
++u32
++ar8xxx_rmw(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val);
++
++void
++ar8xxx_phy_dbg_write(struct ar8xxx_priv *priv, int phy_addr,
++ u16 dbg_addr, u16 dbg_data);
++void
++ar8xxx_phy_mmd_write(struct ar8xxx_priv *priv, int phy_addr, u16 addr, u16 data);
++u16
++ar8xxx_phy_mmd_read(struct ar8xxx_priv *priv, int phy_addr, u16 addr);
++void
++ar8xxx_phy_init(struct ar8xxx_priv *priv);
++int
++ar8xxx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_reset_mibs(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_mirror_rx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_get_mirror_rx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_mirror_tx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_get_mirror_tx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_mirror_monitor_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_get_mirror_monitor_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_mirror_source_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_get_mirror_source_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_pvid(struct switch_dev *dev, int port, int vlan);
++int
++ar8xxx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan);
++int
++ar8xxx_sw_hw_apply(struct switch_dev *dev);
++int
++ar8xxx_sw_reset_switch(struct switch_dev *dev);
++int
++ar8xxx_sw_get_port_link(struct switch_dev *dev, int port,
++ struct switch_port_link *link);
++int
++ar8xxx_sw_set_port_reset_mib(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_get_port_mib(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_get_arl_table(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_flush_arl_table(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8xxx_sw_set_flush_port_arl_table(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val);
++int
++ar8216_wait_bit(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val);
++
++static inline struct ar8xxx_priv *
++swdev_to_ar8xxx(struct switch_dev *swdev)
++{
++ return container_of(swdev, struct ar8xxx_priv, dev);
++}
++
++static inline bool ar8xxx_has_gige(struct ar8xxx_priv *priv)
++{
++ return priv->chip->caps & AR8XXX_CAP_GIGE;
++}
++
++static inline bool ar8xxx_has_mib_counters(struct ar8xxx_priv *priv)
++{
++ return priv->chip->caps & AR8XXX_CAP_MIB_COUNTERS;
++}
++
++static inline bool chip_is_ar8216(struct ar8xxx_priv *priv)
++{
++ return priv->chip_ver == AR8XXX_VER_AR8216;
++}
++
++static inline bool chip_is_ar8236(struct ar8xxx_priv *priv)
++{
++ return priv->chip_ver == AR8XXX_VER_AR8236;
++}
++
++static inline bool chip_is_ar8316(struct ar8xxx_priv *priv)
++{
++ return priv->chip_ver == AR8XXX_VER_AR8316;
++}
++
++static inline bool chip_is_ar8327(struct ar8xxx_priv *priv)
++{
++ return priv->chip_ver == AR8XXX_VER_AR8327;
++}
++
++static inline bool chip_is_ar8337(struct ar8xxx_priv *priv)
++{
++ return priv->chip_ver == AR8XXX_VER_AR8337;
++}
++
++static inline void
++ar8xxx_reg_set(struct ar8xxx_priv *priv, int reg, u32 val)
++{
++ ar8xxx_rmw(priv, reg, 0, val);
++}
++
++static inline void
++ar8xxx_reg_clear(struct ar8xxx_priv *priv, int reg, u32 val)
++{
++ ar8xxx_rmw(priv, reg, val, 0);
++}
++
++static inline void
++split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
++{
++ regaddr >>= 1;
++ *r1 = regaddr & 0x1e;
++
++ regaddr >>= 5;
++ *r2 = regaddr & 0x7;
++
++ regaddr >>= 3;
++ *page = regaddr & 0x1ff;
++}
++
++static inline void
++wait_for_page_switch(void)
++{
++ udelay(5);
++}
++
++#endif
+diff -Nur linux-4.1.6.orig/drivers/net/phy/ar8327.c linux-4.1.6/drivers/net/phy/ar8327.c
+--- linux-4.1.6.orig/drivers/net/phy/ar8327.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/ar8327.c 2015-09-13 22:55:18.331373990 +0200
+@@ -0,0 +1,1268 @@
++/*
++ * ar8327.c: AR8216 switch driver
++ *
++ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/list.h>
++#include <linux/bitops.h>
++#include <linux/switch.h>
++#include <linux/delay.h>
++#include <linux/phy.h>
++#include <linux/lockdep.h>
++#include <linux/ar8216_platform.h>
++#include <linux/workqueue.h>
++#include <linux/of_device.h>
++#include <linux/leds.h>
++#include <linux/mdio.h>
++
++#include "ar8216.h"
++#include "ar8327.h"
++
++extern const struct ar8xxx_mib_desc ar8236_mibs[39];
++extern const struct switch_attr ar8xxx_sw_attr_vlan[1];
++
++static u32
++ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg)
++{
++ u32 t;
++
++ if (!cfg)
++ return 0;
++
++ t = 0;
++ switch (cfg->mode) {
++ case AR8327_PAD_NC:
++ break;
++
++ case AR8327_PAD_MAC2MAC_MII:
++ t = AR8327_PAD_MAC_MII_EN;
++ if (cfg->rxclk_sel)
++ t |= AR8327_PAD_MAC_MII_RXCLK_SEL;
++ if (cfg->txclk_sel)
++ t |= AR8327_PAD_MAC_MII_TXCLK_SEL;
++ break;
++
++ case AR8327_PAD_MAC2MAC_GMII:
++ t = AR8327_PAD_MAC_GMII_EN;
++ if (cfg->rxclk_sel)
++ t |= AR8327_PAD_MAC_GMII_RXCLK_SEL;
++ if (cfg->txclk_sel)
++ t |= AR8327_PAD_MAC_GMII_TXCLK_SEL;
++ break;
++
++ case AR8327_PAD_MAC_SGMII:
++ t = AR8327_PAD_SGMII_EN;
++
++ /*
++ * WAR for the QUalcomm Atheros AP136 board.
++ * It seems that RGMII TX/RX delay settings needs to be
++ * applied for SGMII mode as well, The ethernet is not
++ * reliable without this.
++ */
++ t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
++ t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
++ if (cfg->rxclk_delay_en)
++ t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
++ if (cfg->txclk_delay_en)
++ t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
++
++ if (cfg->sgmii_delay_en)
++ t |= AR8327_PAD_SGMII_DELAY_EN;
++
++ break;
++
++ case AR8327_PAD_MAC2PHY_MII:
++ t = AR8327_PAD_PHY_MII_EN;
++ if (cfg->rxclk_sel)
++ t |= AR8327_PAD_PHY_MII_RXCLK_SEL;
++ if (cfg->txclk_sel)
++ t |= AR8327_PAD_PHY_MII_TXCLK_SEL;
++ break;
++
++ case AR8327_PAD_MAC2PHY_GMII:
++ t = AR8327_PAD_PHY_GMII_EN;
++ if (cfg->pipe_rxclk_sel)
++ t |= AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL;
++ if (cfg->rxclk_sel)
++ t |= AR8327_PAD_PHY_GMII_RXCLK_SEL;
++ if (cfg->txclk_sel)
++ t |= AR8327_PAD_PHY_GMII_TXCLK_SEL;
++ break;
++
++ case AR8327_PAD_MAC_RGMII:
++ t = AR8327_PAD_RGMII_EN;
++ t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
++ t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
++ if (cfg->rxclk_delay_en)
++ t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
++ if (cfg->txclk_delay_en)
++ t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
++ break;
++
++ case AR8327_PAD_PHY_GMII:
++ t = AR8327_PAD_PHYX_GMII_EN;
++ break;
++
++ case AR8327_PAD_PHY_RGMII:
++ t = AR8327_PAD_PHYX_RGMII_EN;
++ break;
++
++ case AR8327_PAD_PHY_MII:
++ t = AR8327_PAD_PHYX_MII_EN;
++ break;
++ }
++
++ if (cfg->mac06_exchange_en)
++ t |= AR8337_PAD_MAC06_EXCHANGE_EN;
++
++ return t;
++}
++
++static void
++ar8327_phy_fixup(struct ar8xxx_priv *priv, int phy)
++{
++ switch (priv->chip_rev) {
++ case 1:
++ /* For 100M waveform */
++ ar8xxx_phy_dbg_write(priv, phy, 0, 0x02ea);
++ /* Turn on Gigabit clock */
++ ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x68a0);
++ break;
++
++ case 2:
++ ar8xxx_phy_mmd_write(priv, phy, 0x7, 0x3c);
++ ar8xxx_phy_mmd_write(priv, phy, 0x4007, 0x0);
++ /* fallthrough */
++ case 4:
++ ar8xxx_phy_mmd_write(priv, phy, 0x3, 0x800d);
++ ar8xxx_phy_mmd_write(priv, phy, 0x4003, 0x803f);
++
++ ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x6860);
++ ar8xxx_phy_dbg_write(priv, phy, 0x5, 0x2c46);
++ ar8xxx_phy_dbg_write(priv, phy, 0x3c, 0x6000);
++ break;
++ }
++}
++
++static u32
++ar8327_get_port_init_status(struct ar8327_port_cfg *cfg)
++{
++ u32 t;
++
++ if (!cfg->force_link)
++ return AR8216_PORT_STATUS_LINK_AUTO;
++
++ t = AR8216_PORT_STATUS_TXMAC | AR8216_PORT_STATUS_RXMAC;
++ t |= cfg->duplex ? AR8216_PORT_STATUS_DUPLEX : 0;
++ t |= cfg->rxpause ? AR8216_PORT_STATUS_RXFLOW : 0;
++ t |= cfg->txpause ? AR8216_PORT_STATUS_TXFLOW : 0;
++
++ switch (cfg->speed) {
++ case AR8327_PORT_SPEED_10:
++ t |= AR8216_PORT_SPEED_10M;
++ break;
++ case AR8327_PORT_SPEED_100:
++ t |= AR8216_PORT_SPEED_100M;
++ break;
++ case AR8327_PORT_SPEED_1000:
++ t |= AR8216_PORT_SPEED_1000M;
++ break;
++ }
++
++ return t;
++}
++
++#define AR8327_LED_ENTRY(_num, _reg, _shift) \
++ [_num] = { .reg = (_reg), .shift = (_shift) }
++
++static const struct ar8327_led_entry
++ar8327_led_map[AR8327_NUM_LEDS] = {
++ AR8327_LED_ENTRY(AR8327_LED_PHY0_0, 0, 14),
++ AR8327_LED_ENTRY(AR8327_LED_PHY0_1, 1, 14),
++ AR8327_LED_ENTRY(AR8327_LED_PHY0_2, 2, 14),
++
++ AR8327_LED_ENTRY(AR8327_LED_PHY1_0, 3, 8),
++ AR8327_LED_ENTRY(AR8327_LED_PHY1_1, 3, 10),
++ AR8327_LED_ENTRY(AR8327_LED_PHY1_2, 3, 12),
++
++ AR8327_LED_ENTRY(AR8327_LED_PHY2_0, 3, 14),
++ AR8327_LED_ENTRY(AR8327_LED_PHY2_1, 3, 16),
++ AR8327_LED_ENTRY(AR8327_LED_PHY2_2, 3, 18),
++
++ AR8327_LED_ENTRY(AR8327_LED_PHY3_0, 3, 20),
++ AR8327_LED_ENTRY(AR8327_LED_PHY3_1, 3, 22),
++ AR8327_LED_ENTRY(AR8327_LED_PHY3_2, 3, 24),
++
++ AR8327_LED_ENTRY(AR8327_LED_PHY4_0, 0, 30),
++ AR8327_LED_ENTRY(AR8327_LED_PHY4_1, 1, 30),
++ AR8327_LED_ENTRY(AR8327_LED_PHY4_2, 2, 30),
++};
++
++static void
++ar8327_set_led_pattern(struct ar8xxx_priv *priv, unsigned int led_num,
++ enum ar8327_led_pattern pattern)
++{
++ const struct ar8327_led_entry *entry;
++
++ entry = &ar8327_led_map[led_num];
++ ar8xxx_rmw(priv, AR8327_REG_LED_CTRL(entry->reg),
++ (3 << entry->shift), pattern << entry->shift);
++}
++
++static void
++ar8327_led_work_func(struct work_struct *work)
++{
++ struct ar8327_led *aled;
++ u8 pattern;
++
++ aled = container_of(work, struct ar8327_led, led_work);
++
++ spin_lock(&aled->lock);
++ pattern = aled->pattern;
++ spin_unlock(&aled->lock);
++
++ ar8327_set_led_pattern(aled->sw_priv, aled->led_num,
++ pattern);
++}
++
++static void
++ar8327_led_schedule_change(struct ar8327_led *aled, u8 pattern)
++{
++ if (aled->pattern == pattern)
++ return;
++
++ aled->pattern = pattern;
++ schedule_work(&aled->led_work);
++}
++
++static inline struct ar8327_led *
++led_cdev_to_ar8327_led(struct led_classdev *led_cdev)
++{
++ return container_of(led_cdev, struct ar8327_led, cdev);
++}
++
++static int
++ar8327_led_blink_set(struct led_classdev *led_cdev,
++ unsigned long *delay_on,
++ unsigned long *delay_off)
++{
++ struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
++
++ if (*delay_on == 0 && *delay_off == 0) {
++ *delay_on = 125;
++ *delay_off = 125;
++ }
++
++ if (*delay_on != 125 || *delay_off != 125) {
++ /*
++ * The hardware only supports blinking at 4Hz. Fall back
++ * to software implementation in other cases.
++ */
++ return -EINVAL;
++ }
++
++ spin_lock(&aled->lock);
++
++ aled->enable_hw_mode = false;
++ ar8327_led_schedule_change(aled, AR8327_LED_PATTERN_BLINK);
++
++ spin_unlock(&aled->lock);
++
++ return 0;
++}
++
++static void
++ar8327_led_set_brightness(struct led_classdev *led_cdev,
++ enum led_brightness brightness)
++{
++ struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
++ u8 pattern;
++ bool active;
++
++ active = (brightness != LED_OFF);
++ active ^= aled->active_low;
++
++ pattern = (active) ? AR8327_LED_PATTERN_ON :
++ AR8327_LED_PATTERN_OFF;
++
++ spin_lock(&aled->lock);
++
++ aled->enable_hw_mode = false;
++ ar8327_led_schedule_change(aled, pattern);
++
++ spin_unlock(&aled->lock);
++}
++
++static ssize_t
++ar8327_led_enable_hw_mode_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
++ ssize_t ret = 0;
++
++ spin_lock(&aled->lock);
++ ret += sprintf(buf, "%d\n", aled->enable_hw_mode);
++ spin_unlock(&aled->lock);
++
++ return ret;
++}
++
++static ssize_t
++ar8327_led_enable_hw_mode_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf,
++ size_t size)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
++ u8 pattern;
++ u8 value;
++ int ret;
++
++ ret = kstrtou8(buf, 10, &value);
++ if (ret < 0)
++ return -EINVAL;
++
++ spin_lock(&aled->lock);
++
++ aled->enable_hw_mode = !!value;
++ if (aled->enable_hw_mode)
++ pattern = AR8327_LED_PATTERN_RULE;
++ else
++ pattern = AR8327_LED_PATTERN_OFF;
++
++ ar8327_led_schedule_change(aled, pattern);
++
++ spin_unlock(&aled->lock);
++
++ return size;
++}
++
++static DEVICE_ATTR(enable_hw_mode, S_IRUGO | S_IWUSR,
++ ar8327_led_enable_hw_mode_show,
++ ar8327_led_enable_hw_mode_store);
++
++static int
++ar8327_led_register(struct ar8327_led *aled)
++{
++ int ret;
++
++ ret = led_classdev_register(NULL, &aled->cdev);
++ if (ret < 0)
++ return ret;
++
++ if (aled->mode == AR8327_LED_MODE_HW) {
++ ret = device_create_file(aled->cdev.dev,
++ &dev_attr_enable_hw_mode);
++ if (ret)
++ goto err_unregister;
++ }
++
++ return 0;
++
++err_unregister:
++ led_classdev_unregister(&aled->cdev);
++ return ret;
++}
++
++static void
++ar8327_led_unregister(struct ar8327_led *aled)
++{
++ if (aled->mode == AR8327_LED_MODE_HW)
++ device_remove_file(aled->cdev.dev, &dev_attr_enable_hw_mode);
++
++ led_classdev_unregister(&aled->cdev);
++ cancel_work_sync(&aled->led_work);
++}
++
++static int
++ar8327_led_create(struct ar8xxx_priv *priv,
++ const struct ar8327_led_info *led_info)
++{
++ struct ar8327_data *data = priv->chip_data;
++ struct ar8327_led *aled;
++ int ret;
++
++ if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
++ return 0;
++
++ if (!led_info->name)
++ return -EINVAL;
++
++ if (led_info->led_num >= AR8327_NUM_LEDS)
++ return -EINVAL;
++
++ aled = kzalloc(sizeof(*aled) + strlen(led_info->name) + 1,
++ GFP_KERNEL);
++ if (!aled)
++ return -ENOMEM;
++
++ aled->sw_priv = priv;
++ aled->led_num = led_info->led_num;
++ aled->active_low = led_info->active_low;
++ aled->mode = led_info->mode;
++
++ if (aled->mode == AR8327_LED_MODE_HW)
++ aled->enable_hw_mode = true;
++
++ aled->name = (char *)(aled + 1);
++ strcpy(aled->name, led_info->name);
++
++ aled->cdev.name = aled->name;
++ aled->cdev.brightness_set = ar8327_led_set_brightness;
++ aled->cdev.blink_set = ar8327_led_blink_set;
++ aled->cdev.default_trigger = led_info->default_trigger;
++
++ spin_lock_init(&aled->lock);
++ mutex_init(&aled->mutex);
++ INIT_WORK(&aled->led_work, ar8327_led_work_func);
++
++ ret = ar8327_led_register(aled);
++ if (ret)
++ goto err_free;
++
++ data->leds[data->num_leds++] = aled;
++
++ return 0;
++
++err_free:
++ kfree(aled);
++ return ret;
++}
++
++static void
++ar8327_led_destroy(struct ar8327_led *aled)
++{
++ ar8327_led_unregister(aled);
++ kfree(aled);
++}
++
++static void
++ar8327_leds_init(struct ar8xxx_priv *priv)
++{
++ struct ar8327_data *data = priv->chip_data;
++ unsigned i;
++
++ if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
++ return;
++
++ for (i = 0; i < data->num_leds; i++) {
++ struct ar8327_led *aled;
++
++ aled = data->leds[i];
++
++ if (aled->enable_hw_mode)
++ aled->pattern = AR8327_LED_PATTERN_RULE;
++ else
++ aled->pattern = AR8327_LED_PATTERN_OFF;
++
++ ar8327_set_led_pattern(priv, aled->led_num, aled->pattern);
++ }
++}
++
++static void
++ar8327_leds_cleanup(struct ar8xxx_priv *priv)
++{
++ struct ar8327_data *data = priv->chip_data;
++ unsigned i;
++
++ if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
++ return;
++
++ for (i = 0; i < data->num_leds; i++) {
++ struct ar8327_led *aled;
++
++ aled = data->leds[i];
++ ar8327_led_destroy(aled);
++ }
++
++ kfree(data->leds);
++}
++
++static int
++ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
++ struct ar8327_platform_data *pdata)
++{
++ struct ar8327_led_cfg *led_cfg;
++ struct ar8327_data *data = priv->chip_data;
++ u32 pos, new_pos;
++ u32 t;
++
++ if (!pdata)
++ return -EINVAL;
++
++ priv->get_port_link = pdata->get_port_link;
++
++ data->port0_status = ar8327_get_port_init_status(&pdata->port0_cfg);
++ data->port6_status = ar8327_get_port_init_status(&pdata->port6_cfg);
++
++ t = ar8327_get_pad_cfg(pdata->pad0_cfg);
++ ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
++ t = ar8327_get_pad_cfg(pdata->pad5_cfg);
++ ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
++ t = ar8327_get_pad_cfg(pdata->pad6_cfg);
++ ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);
++
++ pos = ar8xxx_read(priv, AR8327_REG_POWER_ON_STRIP);
++ new_pos = pos;
++
++ led_cfg = pdata->led_cfg;
++ if (led_cfg) {
++ if (led_cfg->open_drain)
++ new_pos |= AR8327_POWER_ON_STRIP_LED_OPEN_EN;
++ else
++ new_pos &= ~AR8327_POWER_ON_STRIP_LED_OPEN_EN;
++
++ ar8xxx_write(priv, AR8327_REG_LED_CTRL0, led_cfg->led_ctrl0);
++ ar8xxx_write(priv, AR8327_REG_LED_CTRL1, led_cfg->led_ctrl1);
++ ar8xxx_write(priv, AR8327_REG_LED_CTRL2, led_cfg->led_ctrl2);
++ ar8xxx_write(priv, AR8327_REG_LED_CTRL3, led_cfg->led_ctrl3);
++
++ if (new_pos != pos)
++ new_pos |= AR8327_POWER_ON_STRIP_POWER_ON_SEL;
++ }
++
++ if (pdata->sgmii_cfg) {
++ t = pdata->sgmii_cfg->sgmii_ctrl;
++ if (priv->chip_rev == 1)
++ t |= AR8327_SGMII_CTRL_EN_PLL |
++ AR8327_SGMII_CTRL_EN_RX |
++ AR8327_SGMII_CTRL_EN_TX;
++ else
++ t &= ~(AR8327_SGMII_CTRL_EN_PLL |
++ AR8327_SGMII_CTRL_EN_RX |
++ AR8327_SGMII_CTRL_EN_TX);
++
++ ar8xxx_write(priv, AR8327_REG_SGMII_CTRL, t);
++
++ if (pdata->sgmii_cfg->serdes_aen)
++ new_pos &= ~AR8327_POWER_ON_STRIP_SERDES_AEN;
++ else
++ new_pos |= AR8327_POWER_ON_STRIP_SERDES_AEN;
++ }
++
++ ar8xxx_write(priv, AR8327_REG_POWER_ON_STRIP, new_pos);
++
++ if (pdata->leds && pdata->num_leds) {
++ int i;
++
++ data->leds = kzalloc(pdata->num_leds * sizeof(void *),
++ GFP_KERNEL);
++ if (!data->leds)
++ return -ENOMEM;
++
++ for (i = 0; i < pdata->num_leds; i++)
++ ar8327_led_create(priv, &pdata->leds[i]);
++ }
++
++ return 0;
++}
++
++#ifdef CONFIG_OF
++static int
++ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
++{
++ struct ar8327_data *data = priv->chip_data;
++ const __be32 *paddr;
++ int len;
++ int i;
++
++ paddr = of_get_property(np, "qca,ar8327-initvals", &len);
++ if (!paddr || len < (2 * sizeof(*paddr)))
++ return -EINVAL;
++
++ len /= sizeof(*paddr);
++
++ for (i = 0; i < len - 1; i += 2) {
++ u32 reg;
++ u32 val;
++
++ reg = be32_to_cpup(paddr + i);
++ val = be32_to_cpup(paddr + i + 1);
++
++ switch (reg) {
++ case AR8327_REG_PORT_STATUS(0):
++ data->port0_status = val;
++ break;
++ case AR8327_REG_PORT_STATUS(6):
++ data->port6_status = val;
++ break;
++ default:
++ ar8xxx_write(priv, reg, val);
++ break;
++ }
++ }
++
++ return 0;
++}
++#else
++static inline int
++ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
++{
++ return -EINVAL;
++}
++#endif
++
++static int
++ar8327_hw_init(struct ar8xxx_priv *priv)
++{
++ int ret;
++
++ priv->chip_data = kzalloc(sizeof(struct ar8327_data), GFP_KERNEL);
++ if (!priv->chip_data)
++ return -ENOMEM;
++
++ if (priv->phy->dev.of_node)
++ ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
++ else
++ ret = ar8327_hw_config_pdata(priv,
++ priv->phy->dev.platform_data);
++
++ if (ret)
++ return ret;
++
++ ar8327_leds_init(priv);
++
++ ar8xxx_phy_init(priv);
++
++ return 0;
++}
++
++static void
++ar8327_cleanup(struct ar8xxx_priv *priv)
++{
++ ar8327_leds_cleanup(priv);
++}
++
++static void
++ar8327_init_globals(struct ar8xxx_priv *priv)
++{
++ struct ar8327_data *data = priv->chip_data;
++ u32 t;
++ int i;
++
++ /* enable CPU port and disable mirror port */
++ t = AR8327_FWD_CTRL0_CPU_PORT_EN |
++ AR8327_FWD_CTRL0_MIRROR_PORT;
++ ar8xxx_write(priv, AR8327_REG_FWD_CTRL0, t);
++
++ /* forward multicast and broadcast frames to CPU */
++ t = (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_UC_FLOOD_S) |
++ (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_MC_FLOOD_S) |
++ (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_BC_FLOOD_S);
++ ar8xxx_write(priv, AR8327_REG_FWD_CTRL1, t);
++
++ /* enable jumbo frames */
++ ar8xxx_rmw(priv, AR8327_REG_MAX_FRAME_SIZE,
++ AR8327_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
++
++ /* Enable MIB counters */
++ ar8xxx_reg_set(priv, AR8327_REG_MODULE_EN,
++ AR8327_MODULE_EN_MIB);
++
++ /* Disable EEE on all phy's due to stability issues */
++ for (i = 0; i < AR8XXX_NUM_PHYS; i++)
++ data->eee[i] = false;
++}
++
++static void
++ar8327_init_port(struct ar8xxx_priv *priv, int port)
++{
++ struct ar8327_data *data = priv->chip_data;
++ u32 t;
++
++ if (port == AR8216_PORT_CPU)
++ t = data->port0_status;
++ else if (port == 6)
++ t = data->port6_status;
++ else
++ t = AR8216_PORT_STATUS_LINK_AUTO;
++
++ ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
++ ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);
++
++ t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
++ t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
++ ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
++
++ t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
++ ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
++
++ t = AR8327_PORT_LOOKUP_LEARN;
++ t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
++ ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
++}
++
++static u32
++ar8327_read_port_status(struct ar8xxx_priv *priv, int port)
++{
++ u32 t;
++
++ t = ar8xxx_read(priv, AR8327_REG_PORT_STATUS(port));
++ /* map the flow control autoneg result bits to the flow control bits
++ * used in forced mode to allow ar8216_read_port_link detect
++ * flow control properly if autoneg is used
++ */
++ if (t & AR8216_PORT_STATUS_LINK_UP &&
++ t & AR8216_PORT_STATUS_LINK_AUTO) {
++ t &= ~(AR8216_PORT_STATUS_TXFLOW | AR8216_PORT_STATUS_RXFLOW);
++ if (t & AR8327_PORT_STATUS_TXFLOW_AUTO)
++ t |= AR8216_PORT_STATUS_TXFLOW;
++ if (t & AR8327_PORT_STATUS_RXFLOW_AUTO)
++ t |= AR8216_PORT_STATUS_RXFLOW;
++ }
++
++ return t;
++}
++
++static u32
++ar8327_read_port_eee_status(struct ar8xxx_priv *priv, int port)
++{
++ int phy;
++ u16 t;
++
++ if (port >= priv->dev.ports)
++ return 0;
++
++ if (port == 0 || port == 6)
++ return 0;
++
++ phy = port - 1;
++
++ /* EEE Ability Auto-negotiation Result */
++ ar8xxx_phy_mmd_write(priv, phy, 0x7, 0x8000);
++ t = ar8xxx_phy_mmd_read(priv, phy, 0x4007);
++
++ return mmd_eee_adv_to_ethtool_adv_t(t);
++}
++
++static int
++ar8327_atu_flush(struct ar8xxx_priv *priv)
++{
++ int ret;
++
++ ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
++ AR8327_ATU_FUNC_BUSY, 0);
++ if (!ret)
++ ar8xxx_write(priv, AR8327_REG_ATU_FUNC,
++ AR8327_ATU_FUNC_OP_FLUSH |
++ AR8327_ATU_FUNC_BUSY);
++
++ return ret;
++}
++
++static int
++ar8327_atu_flush_port(struct ar8xxx_priv *priv, int port)
++{
++ u32 t;
++ int ret;
++
++ ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
++ AR8327_ATU_FUNC_BUSY, 0);
++ if (!ret) {
++ t = (port << AR8327_ATU_PORT_NUM_S);
++ t |= AR8327_ATU_FUNC_OP_FLUSH_PORT;
++ t |= AR8327_ATU_FUNC_BUSY;
++ ar8xxx_write(priv, AR8327_REG_ATU_FUNC, t);
++ }
++
++ return ret;
++}
++
++static void
++ar8327_vtu_op(struct ar8xxx_priv *priv, u32 op, u32 val)
++{
++ if (ar8216_wait_bit(priv, AR8327_REG_VTU_FUNC1,
++ AR8327_VTU_FUNC1_BUSY, 0))
++ return;
++
++ if ((op & AR8327_VTU_FUNC1_OP) == AR8327_VTU_FUNC1_OP_LOAD)
++ ar8xxx_write(priv, AR8327_REG_VTU_FUNC0, val);
++
++ op |= AR8327_VTU_FUNC1_BUSY;
++ ar8xxx_write(priv, AR8327_REG_VTU_FUNC1, op);
++}
++
++static void
++ar8327_vtu_flush(struct ar8xxx_priv *priv)
++{
++ ar8327_vtu_op(priv, AR8327_VTU_FUNC1_OP_FLUSH, 0);
++}
++
++static void
++ar8327_vtu_load_vlan(struct ar8xxx_priv *priv, u32 vid, u32 port_mask)
++{
++ u32 op;
++ u32 val;
++ int i;
++
++ op = AR8327_VTU_FUNC1_OP_LOAD | (vid << AR8327_VTU_FUNC1_VID_S);
++ val = AR8327_VTU_FUNC0_VALID | AR8327_VTU_FUNC0_IVL;
++ for (i = 0; i < AR8327_NUM_PORTS; i++) {
++ u32 mode;
++
++ if ((port_mask & BIT(i)) == 0)
++ mode = AR8327_VTU_FUNC0_EG_MODE_NOT;
++ else if (priv->vlan == 0)
++ mode = AR8327_VTU_FUNC0_EG_MODE_KEEP;
++ else if ((priv->vlan_tagged & BIT(i)) || (priv->vlan_id[priv->pvid[i]] != vid))
++ mode = AR8327_VTU_FUNC0_EG_MODE_TAG;
++ else
++ mode = AR8327_VTU_FUNC0_EG_MODE_UNTAG;
++
++ val |= mode << AR8327_VTU_FUNC0_EG_MODE_S(i);
++ }
++ ar8327_vtu_op(priv, op, val);
++}
++
++static void
++ar8327_setup_port(struct ar8xxx_priv *priv, int port, u32 members)
++{
++ u32 t;
++ u32 egress, ingress;
++ u32 pvid = priv->vlan_id[priv->pvid[port]];
++
++ if (priv->vlan) {
++ egress = AR8327_PORT_VLAN1_OUT_MODE_UNMOD;
++ ingress = AR8216_IN_SECURE;
++ } else {
++ egress = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH;
++ ingress = AR8216_IN_PORT_ONLY;
++ }
++
++ t = pvid << AR8327_PORT_VLAN0_DEF_SVID_S;
++ t |= pvid << AR8327_PORT_VLAN0_DEF_CVID_S;
++ ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
++
++ t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
++ t |= egress << AR8327_PORT_VLAN1_OUT_MODE_S;
++ ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
++
++ t = members;
++ t |= AR8327_PORT_LOOKUP_LEARN;
++ t |= ingress << AR8327_PORT_LOOKUP_IN_MODE_S;
++ t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
++ ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
++}
++
++static int
++ar8327_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ u8 ports = priv->vlan_table[val->port_vlan];
++ int i;
++
++ val->len = 0;
++ for (i = 0; i < dev->ports; i++) {
++ struct switch_port *p;
++
++ if (!(ports & (1 << i)))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++ if ((priv->vlan_tagged & (1 << i)) || (priv->pvid[i] != val->port_vlan))
++ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
++ else
++ p->flags = 0;
++ }
++ return 0;
++}
++
++static int
++ar8327_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ u8 *vt = &priv->vlan_table[val->port_vlan];
++ int i;
++
++ *vt = 0;
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++
++ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
++ if (val->port_vlan == priv->pvid[p->id]) {
++ priv->vlan_tagged |= (1 << p->id);
++ }
++ } else {
++ priv->vlan_tagged &= ~(1 << p->id);
++ priv->pvid[p->id] = val->port_vlan;
++ }
++
++ *vt |= 1 << p->id;
++ }
++ return 0;
++}
++
++static void
++ar8327_set_mirror_regs(struct ar8xxx_priv *priv)
++{
++ int port;
++
++ /* reset all mirror registers */
++ ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
++ AR8327_FWD_CTRL0_MIRROR_PORT,
++ (0xF << AR8327_FWD_CTRL0_MIRROR_PORT_S));
++ for (port = 0; port < AR8327_NUM_PORTS; port++) {
++ ar8xxx_reg_clear(priv, AR8327_REG_PORT_LOOKUP(port),
++ AR8327_PORT_LOOKUP_ING_MIRROR_EN);
++
++ ar8xxx_reg_clear(priv, AR8327_REG_PORT_HOL_CTRL1(port),
++ AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
++ }
++
++ /* now enable mirroring if necessary */
++ if (priv->source_port >= AR8327_NUM_PORTS ||
++ priv->monitor_port >= AR8327_NUM_PORTS ||
++ priv->source_port == priv->monitor_port) {
++ return;
++ }
++
++ ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
++ AR8327_FWD_CTRL0_MIRROR_PORT,
++ (priv->monitor_port << AR8327_FWD_CTRL0_MIRROR_PORT_S));
++
++ if (priv->mirror_rx)
++ ar8xxx_reg_set(priv, AR8327_REG_PORT_LOOKUP(priv->source_port),
++ AR8327_PORT_LOOKUP_ING_MIRROR_EN);
++
++ if (priv->mirror_tx)
++ ar8xxx_reg_set(priv, AR8327_REG_PORT_HOL_CTRL1(priv->source_port),
++ AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
++}
++
++static int
++ar8327_sw_set_eee(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ struct ar8327_data *data = priv->chip_data;
++ int port = val->port_vlan;
++ int phy;
++
++ if (port >= dev->ports)
++ return -EINVAL;
++ if (port == 0 || port == 6)
++ return -EOPNOTSUPP;
++
++ phy = port - 1;
++
++ data->eee[phy] = !!(val->value.i);
++
++ return 0;
++}
++
++static int
++ar8327_sw_get_eee(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ const struct ar8327_data *data = priv->chip_data;
++ int port = val->port_vlan;
++ int phy;
++
++ if (port >= dev->ports)
++ return -EINVAL;
++ if (port == 0 || port == 6)
++ return -EOPNOTSUPP;
++
++ phy = port - 1;
++
++ val->value.i = data->eee[phy];
++
++ return 0;
++}
++
++static void
++ar8327_wait_atu_ready(struct ar8xxx_priv *priv, u16 r2, u16 r1)
++{
++ int timeout = 20;
++
++ while (ar8xxx_mii_read32(priv, r2, r1) & AR8327_ATU_FUNC_BUSY && --timeout)
++ udelay(10);
++
++ if (!timeout)
++ pr_err("ar8327: timeout waiting for atu to become ready\n");
++}
++
++static void ar8327_get_arl_entry(struct ar8xxx_priv *priv,
++ struct arl_entry *a, u32 *status, enum arl_op op)
++{
++ struct mii_bus *bus = priv->mii_bus;
++ u16 r2, page;
++ u16 r1_data0, r1_data1, r1_data2, r1_func;
++ u32 t, val0, val1, val2;
++ int i;
++
++ split_addr(AR8327_REG_ATU_DATA0, &r1_data0, &r2, &page);
++ r2 |= 0x10;
++
++ r1_data1 = (AR8327_REG_ATU_DATA1 >> 1) & 0x1e;
++ r1_data2 = (AR8327_REG_ATU_DATA2 >> 1) & 0x1e;
++ r1_func = (AR8327_REG_ATU_FUNC >> 1) & 0x1e;
++
++ switch (op) {
++ case AR8XXX_ARL_INITIALIZE:
++ /* all ATU registers are on the same page
++ * therefore set page only once
++ */
++ bus->write(bus, 0x18, 0, page);
++ wait_for_page_switch();
++
++ ar8327_wait_atu_ready(priv, r2, r1_func);
++
++ ar8xxx_mii_write32(priv, r2, r1_data0, 0);
++ ar8xxx_mii_write32(priv, r2, r1_data1, 0);
++ ar8xxx_mii_write32(priv, r2, r1_data2, 0);
++ break;
++ case AR8XXX_ARL_GET_NEXT:
++ ar8xxx_mii_write32(priv, r2, r1_func,
++ AR8327_ATU_FUNC_OP_GET_NEXT |
++ AR8327_ATU_FUNC_BUSY);
++ ar8327_wait_atu_ready(priv, r2, r1_func);
++
++ val0 = ar8xxx_mii_read32(priv, r2, r1_data0);
++ val1 = ar8xxx_mii_read32(priv, r2, r1_data1);
++ val2 = ar8xxx_mii_read32(priv, r2, r1_data2);
++
++ *status = val2 & AR8327_ATU_STATUS;
++ if (!*status)
++ break;
++
++ i = 0;
++ t = AR8327_ATU_PORT0;
++ while (!(val1 & t) && ++i < AR8327_NUM_PORTS)
++ t <<= 1;
++
++ a->port = i;
++ a->mac[0] = (val0 & AR8327_ATU_ADDR0) >> AR8327_ATU_ADDR0_S;
++ a->mac[1] = (val0 & AR8327_ATU_ADDR1) >> AR8327_ATU_ADDR1_S;
++ a->mac[2] = (val0 & AR8327_ATU_ADDR2) >> AR8327_ATU_ADDR2_S;
++ a->mac[3] = (val0 & AR8327_ATU_ADDR3) >> AR8327_ATU_ADDR3_S;
++ a->mac[4] = (val1 & AR8327_ATU_ADDR4) >> AR8327_ATU_ADDR4_S;
++ a->mac[5] = (val1 & AR8327_ATU_ADDR5) >> AR8327_ATU_ADDR5_S;
++ break;
++ }
++}
++
++static int
++ar8327_sw_hw_apply(struct switch_dev *dev)
++{
++ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
++ const struct ar8327_data *data = priv->chip_data;
++ int ret, i;
++
++ ret = ar8xxx_sw_hw_apply(dev);
++ if (ret)
++ return ret;
++
++ for (i=0; i < AR8XXX_NUM_PHYS; i++) {
++ if (data->eee[i])
++ ar8xxx_reg_clear(priv, AR8327_REG_EEE_CTRL,
++ AR8327_EEE_CTRL_DISABLE_PHY(i));
++ else
++ ar8xxx_reg_set(priv, AR8327_REG_EEE_CTRL,
++ AR8327_EEE_CTRL_DISABLE_PHY(i));
++ }
++
++ return 0;
++}
++
++static const struct switch_attr ar8327_sw_attr_globals[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "Enable VLAN mode",
++ .set = ar8xxx_sw_set_vlan,
++ .get = ar8xxx_sw_get_vlan,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "reset_mibs",
++ .description = "Reset all MIB counters",
++ .set = ar8xxx_sw_set_reset_mibs,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_mirror_rx",
++ .description = "Enable mirroring of RX packets",
++ .set = ar8xxx_sw_set_mirror_rx_enable,
++ .get = ar8xxx_sw_get_mirror_rx_enable,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_mirror_tx",
++ .description = "Enable mirroring of TX packets",
++ .set = ar8xxx_sw_set_mirror_tx_enable,
++ .get = ar8xxx_sw_get_mirror_tx_enable,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "mirror_monitor_port",
++ .description = "Mirror monitor port",
++ .set = ar8xxx_sw_set_mirror_monitor_port,
++ .get = ar8xxx_sw_get_mirror_monitor_port,
++ .max = AR8327_NUM_PORTS - 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "mirror_source_port",
++ .description = "Mirror source port",
++ .set = ar8xxx_sw_set_mirror_source_port,
++ .get = ar8xxx_sw_get_mirror_source_port,
++ .max = AR8327_NUM_PORTS - 1
++ },
++ {
++ .type = SWITCH_TYPE_STRING,
++ .name = "arl_table",
++ .description = "Get ARL table",
++ .set = NULL,
++ .get = ar8xxx_sw_get_arl_table,
++ },
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "flush_arl_table",
++ .description = "Flush ARL table",
++ .set = ar8xxx_sw_set_flush_arl_table,
++ },
++};
++
++static const struct switch_attr ar8327_sw_attr_port[] = {
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "reset_mib",
++ .description = "Reset single port MIB counters",
++ .set = ar8xxx_sw_set_port_reset_mib,
++ },
++ {
++ .type = SWITCH_TYPE_STRING,
++ .name = "mib",
++ .description = "Get port's MIB counters",
++ .set = NULL,
++ .get = ar8xxx_sw_get_port_mib,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_eee",
++ .description = "Enable EEE PHY sleep mode",
++ .set = ar8327_sw_set_eee,
++ .get = ar8327_sw_get_eee,
++ .max = 1,
++ },
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "flush_arl_table",
++ .description = "Flush port's ARL table entries",
++ .set = ar8xxx_sw_set_flush_port_arl_table,
++ },
++};
++
++static const struct switch_dev_ops ar8327_sw_ops = {
++ .attr_global = {
++ .attr = ar8327_sw_attr_globals,
++ .n_attr = ARRAY_SIZE(ar8327_sw_attr_globals),
++ },
++ .attr_port = {
++ .attr = ar8327_sw_attr_port,
++ .n_attr = ARRAY_SIZE(ar8327_sw_attr_port),
++ },
++ .attr_vlan = {
++ .attr = ar8xxx_sw_attr_vlan,
++ .n_attr = ARRAY_SIZE(ar8xxx_sw_attr_vlan),
++ },
++ .get_port_pvid = ar8xxx_sw_get_pvid,
++ .set_port_pvid = ar8xxx_sw_set_pvid,
++ .get_vlan_ports = ar8327_sw_get_ports,
++ .set_vlan_ports = ar8327_sw_set_ports,
++ .apply_config = ar8327_sw_hw_apply,
++ .reset_switch = ar8xxx_sw_reset_switch,
++ .get_port_link = ar8xxx_sw_get_port_link,
++};
++
++const struct ar8xxx_chip ar8327_chip = {
++ .caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
++ .config_at_probe = true,
++ .mii_lo_first = true,
++
++ .name = "Atheros AR8327",
++ .ports = AR8327_NUM_PORTS,
++ .vlans = AR8X16_MAX_VLANS,
++ .swops = &ar8327_sw_ops,
++
++ .reg_port_stats_start = 0x1000,
++ .reg_port_stats_length = 0x100,
++
++ .hw_init = ar8327_hw_init,
++ .cleanup = ar8327_cleanup,
++ .init_globals = ar8327_init_globals,
++ .init_port = ar8327_init_port,
++ .setup_port = ar8327_setup_port,
++ .read_port_status = ar8327_read_port_status,
++ .read_port_eee_status = ar8327_read_port_eee_status,
++ .atu_flush = ar8327_atu_flush,
++ .atu_flush_port = ar8327_atu_flush_port,
++ .vtu_flush = ar8327_vtu_flush,
++ .vtu_load_vlan = ar8327_vtu_load_vlan,
++ .phy_fixup = ar8327_phy_fixup,
++ .set_mirror_regs = ar8327_set_mirror_regs,
++ .get_arl_entry = ar8327_get_arl_entry,
++ .sw_hw_apply = ar8327_sw_hw_apply,
++
++ .num_mibs = ARRAY_SIZE(ar8236_mibs),
++ .mib_decs = ar8236_mibs,
++ .mib_func = AR8327_REG_MIB_FUNC
++};
++
++const struct ar8xxx_chip ar8337_chip = {
++ .caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
++ .config_at_probe = true,
++ .mii_lo_first = true,
++
++ .name = "Atheros AR8337",
++ .ports = AR8327_NUM_PORTS,
++ .vlans = AR8X16_MAX_VLANS,
++ .swops = &ar8327_sw_ops,
++
++ .reg_port_stats_start = 0x1000,
++ .reg_port_stats_length = 0x100,
++
++ .hw_init = ar8327_hw_init,
++ .cleanup = ar8327_cleanup,
++ .init_globals = ar8327_init_globals,
++ .init_port = ar8327_init_port,
++ .setup_port = ar8327_setup_port,
++ .read_port_status = ar8327_read_port_status,
++ .read_port_eee_status = ar8327_read_port_eee_status,
++ .atu_flush = ar8327_atu_flush,
++ .atu_flush_port = ar8327_atu_flush_port,
++ .vtu_flush = ar8327_vtu_flush,
++ .vtu_load_vlan = ar8327_vtu_load_vlan,
++ .phy_fixup = ar8327_phy_fixup,
++ .set_mirror_regs = ar8327_set_mirror_regs,
++ .get_arl_entry = ar8327_get_arl_entry,
++ .sw_hw_apply = ar8327_sw_hw_apply,
++
++ .num_mibs = ARRAY_SIZE(ar8236_mibs),
++ .mib_decs = ar8236_mibs,
++ .mib_func = AR8327_REG_MIB_FUNC
++};
++
+diff -Nur linux-4.1.6.orig/drivers/net/phy/ar8327.h linux-4.1.6/drivers/net/phy/ar8327.h
+--- linux-4.1.6.orig/drivers/net/phy/ar8327.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/ar8327.h 2015-09-13 22:55:18.331373990 +0200
+@@ -0,0 +1,252 @@
++/*
++ * ar8327.h: AR8216 switch driver
++ *
++ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __AR8327_H
++#define __AR8327_H
++
++#define AR8327_NUM_PORTS 7
++#define AR8327_NUM_LEDS 15
++#define AR8327_PORTS_ALL 0x7f
++#define AR8327_NUM_LED_CTRL_REGS 4
++
++#define AR8327_REG_MASK 0x000
++
++#define AR8327_REG_PAD0_MODE 0x004
++#define AR8327_REG_PAD5_MODE 0x008
++#define AR8327_REG_PAD6_MODE 0x00c
++#define AR8327_PAD_MAC_MII_RXCLK_SEL BIT(0)
++#define AR8327_PAD_MAC_MII_TXCLK_SEL BIT(1)
++#define AR8327_PAD_MAC_MII_EN BIT(2)
++#define AR8327_PAD_MAC_GMII_RXCLK_SEL BIT(4)
++#define AR8327_PAD_MAC_GMII_TXCLK_SEL BIT(5)
++#define AR8327_PAD_MAC_GMII_EN BIT(6)
++#define AR8327_PAD_SGMII_EN BIT(7)
++#define AR8327_PAD_PHY_MII_RXCLK_SEL BIT(8)
++#define AR8327_PAD_PHY_MII_TXCLK_SEL BIT(9)
++#define AR8327_PAD_PHY_MII_EN BIT(10)
++#define AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL BIT(11)
++#define AR8327_PAD_PHY_GMII_RXCLK_SEL BIT(12)
++#define AR8327_PAD_PHY_GMII_TXCLK_SEL BIT(13)
++#define AR8327_PAD_PHY_GMII_EN BIT(14)
++#define AR8327_PAD_PHYX_GMII_EN BIT(16)
++#define AR8327_PAD_PHYX_RGMII_EN BIT(17)
++#define AR8327_PAD_PHYX_MII_EN BIT(18)
++#define AR8327_PAD_SGMII_DELAY_EN BIT(19)
++#define AR8327_PAD_RGMII_RXCLK_DELAY_SEL BITS(20, 2)
++#define AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S 20
++#define AR8327_PAD_RGMII_TXCLK_DELAY_SEL BITS(22, 2)
++#define AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S 22
++#define AR8327_PAD_RGMII_RXCLK_DELAY_EN BIT(24)
++#define AR8327_PAD_RGMII_TXCLK_DELAY_EN BIT(25)
++#define AR8327_PAD_RGMII_EN BIT(26)
++
++#define AR8327_REG_POWER_ON_STRIP 0x010
++#define AR8327_POWER_ON_STRIP_POWER_ON_SEL BIT(31)
++#define AR8327_POWER_ON_STRIP_LED_OPEN_EN BIT(24)
++#define AR8327_POWER_ON_STRIP_SERDES_AEN BIT(7)
++
++#define AR8327_REG_INT_STATUS0 0x020
++#define AR8327_INT0_VT_DONE BIT(20)
++
++#define AR8327_REG_INT_STATUS1 0x024
++#define AR8327_REG_INT_MASK0 0x028
++#define AR8327_REG_INT_MASK1 0x02c
++
++#define AR8327_REG_MODULE_EN 0x030
++#define AR8327_MODULE_EN_MIB BIT(0)
++
++#define AR8327_REG_MIB_FUNC 0x034
++#define AR8327_MIB_CPU_KEEP BIT(20)
++
++#define AR8327_REG_SERVICE_TAG 0x048
++#define AR8327_REG_LED_CTRL(_i) (0x050 + (_i) * 4)
++#define AR8327_REG_LED_CTRL0 0x050
++#define AR8327_REG_LED_CTRL1 0x054
++#define AR8327_REG_LED_CTRL2 0x058
++#define AR8327_REG_LED_CTRL3 0x05c
++#define AR8327_REG_MAC_ADDR0 0x060
++#define AR8327_REG_MAC_ADDR1 0x064
++
++#define AR8327_REG_MAX_FRAME_SIZE 0x078
++#define AR8327_MAX_FRAME_SIZE_MTU BITS(0, 14)
++
++#define AR8327_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
++#define AR8327_PORT_STATUS_TXFLOW_AUTO BIT(10)
++#define AR8327_PORT_STATUS_RXFLOW_AUTO BIT(11)
++
++#define AR8327_REG_HEADER_CTRL 0x098
++#define AR8327_REG_PORT_HEADER(_i) (0x09c + (_i) * 4)
++
++#define AR8327_REG_SGMII_CTRL 0x0e0
++#define AR8327_SGMII_CTRL_EN_PLL BIT(1)
++#define AR8327_SGMII_CTRL_EN_RX BIT(2)
++#define AR8327_SGMII_CTRL_EN_TX BIT(3)
++
++#define AR8327_REG_EEE_CTRL 0x100
++#define AR8327_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2)
++
++#define AR8327_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8)
++#define AR8327_PORT_VLAN0_DEF_SVID BITS(0, 12)
++#define AR8327_PORT_VLAN0_DEF_SVID_S 0
++#define AR8327_PORT_VLAN0_DEF_CVID BITS(16, 12)
++#define AR8327_PORT_VLAN0_DEF_CVID_S 16
++
++#define AR8327_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8)
++#define AR8327_PORT_VLAN1_PORT_VLAN_PROP BIT(6)
++#define AR8327_PORT_VLAN1_OUT_MODE BITS(12, 2)
++#define AR8327_PORT_VLAN1_OUT_MODE_S 12
++#define AR8327_PORT_VLAN1_OUT_MODE_UNMOD 0
++#define AR8327_PORT_VLAN1_OUT_MODE_UNTAG 1
++#define AR8327_PORT_VLAN1_OUT_MODE_TAG 2
++#define AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH 3
++
++#define AR8327_REG_ATU_DATA0 0x600
++#define AR8327_ATU_ADDR0 BITS(0, 8)
++#define AR8327_ATU_ADDR0_S 0
++#define AR8327_ATU_ADDR1 BITS(8, 8)
++#define AR8327_ATU_ADDR1_S 8
++#define AR8327_ATU_ADDR2 BITS(16, 8)
++#define AR8327_ATU_ADDR2_S 16
++#define AR8327_ATU_ADDR3 BITS(24, 8)
++#define AR8327_ATU_ADDR3_S 24
++#define AR8327_REG_ATU_DATA1 0x604
++#define AR8327_ATU_ADDR4 BITS(0, 8)
++#define AR8327_ATU_ADDR4_S 0
++#define AR8327_ATU_ADDR5 BITS(8, 8)
++#define AR8327_ATU_ADDR5_S 8
++#define AR8327_ATU_PORTS BITS(16, 7)
++#define AR8327_ATU_PORT0 BIT(16)
++#define AR8327_ATU_PORT1 BIT(17)
++#define AR8327_ATU_PORT2 BIT(18)
++#define AR8327_ATU_PORT3 BIT(19)
++#define AR8327_ATU_PORT4 BIT(20)
++#define AR8327_ATU_PORT5 BIT(21)
++#define AR8327_ATU_PORT6 BIT(22)
++#define AR8327_REG_ATU_DATA2 0x608
++#define AR8327_ATU_STATUS BITS(0, 4)
++
++#define AR8327_REG_ATU_FUNC 0x60c
++#define AR8327_ATU_FUNC_OP BITS(0, 4)
++#define AR8327_ATU_FUNC_OP_NOOP 0x0
++#define AR8327_ATU_FUNC_OP_FLUSH 0x1
++#define AR8327_ATU_FUNC_OP_LOAD 0x2
++#define AR8327_ATU_FUNC_OP_PURGE 0x3
++#define AR8327_ATU_FUNC_OP_FLUSH_UNLOCKED 0x4
++#define AR8327_ATU_FUNC_OP_FLUSH_PORT 0x5
++#define AR8327_ATU_FUNC_OP_GET_NEXT 0x6
++#define AR8327_ATU_FUNC_OP_SEARCH_MAC 0x7
++#define AR8327_ATU_FUNC_OP_CHANGE_TRUNK 0x8
++#define AR8327_ATU_PORT_NUM BITS(8, 4)
++#define AR8327_ATU_PORT_NUM_S 8
++#define AR8327_ATU_FUNC_BUSY BIT(31)
++
++#define AR8327_REG_VTU_FUNC0 0x0610
++#define AR8327_VTU_FUNC0_EG_MODE BITS(4, 14)
++#define AR8327_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
++#define AR8327_VTU_FUNC0_EG_MODE_KEEP 0
++#define AR8327_VTU_FUNC0_EG_MODE_UNTAG 1
++#define AR8327_VTU_FUNC0_EG_MODE_TAG 2
++#define AR8327_VTU_FUNC0_EG_MODE_NOT 3
++#define AR8327_VTU_FUNC0_IVL BIT(19)
++#define AR8327_VTU_FUNC0_VALID BIT(20)
++
++#define AR8327_REG_VTU_FUNC1 0x0614
++#define AR8327_VTU_FUNC1_OP BITS(0, 3)
++#define AR8327_VTU_FUNC1_OP_NOOP 0
++#define AR8327_VTU_FUNC1_OP_FLUSH 1
++#define AR8327_VTU_FUNC1_OP_LOAD 2
++#define AR8327_VTU_FUNC1_OP_PURGE 3
++#define AR8327_VTU_FUNC1_OP_REMOVE_PORT 4
++#define AR8327_VTU_FUNC1_OP_GET_NEXT 5
++#define AR8327_VTU_FUNC1_OP_GET_ONE 6
++#define AR8327_VTU_FUNC1_FULL BIT(4)
++#define AR8327_VTU_FUNC1_PORT BIT(8, 4)
++#define AR8327_VTU_FUNC1_PORT_S 8
++#define AR8327_VTU_FUNC1_VID BIT(16, 12)
++#define AR8327_VTU_FUNC1_VID_S 16
++#define AR8327_VTU_FUNC1_BUSY BIT(31)
++
++#define AR8327_REG_FWD_CTRL0 0x620
++#define AR8327_FWD_CTRL0_CPU_PORT_EN BIT(10)
++#define AR8327_FWD_CTRL0_MIRROR_PORT BITS(4, 4)
++#define AR8327_FWD_CTRL0_MIRROR_PORT_S 4
++
++#define AR8327_REG_FWD_CTRL1 0x624
++#define AR8327_FWD_CTRL1_UC_FLOOD BITS(0, 7)
++#define AR8327_FWD_CTRL1_UC_FLOOD_S 0
++#define AR8327_FWD_CTRL1_MC_FLOOD BITS(8, 7)
++#define AR8327_FWD_CTRL1_MC_FLOOD_S 8
++#define AR8327_FWD_CTRL1_BC_FLOOD BITS(16, 7)
++#define AR8327_FWD_CTRL1_BC_FLOOD_S 16
++#define AR8327_FWD_CTRL1_IGMP BITS(24, 7)
++#define AR8327_FWD_CTRL1_IGMP_S 24
++
++#define AR8327_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc)
++#define AR8327_PORT_LOOKUP_MEMBER BITS(0, 7)
++#define AR8327_PORT_LOOKUP_IN_MODE BITS(8, 2)
++#define AR8327_PORT_LOOKUP_IN_MODE_S 8
++#define AR8327_PORT_LOOKUP_STATE BITS(16, 3)
++#define AR8327_PORT_LOOKUP_STATE_S 16
++#define AR8327_PORT_LOOKUP_LEARN BIT(20)
++#define AR8327_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
++
++#define AR8327_REG_PORT_PRIO(_i) (0x664 + (_i) * 0xc)
++
++#define AR8327_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
++#define AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
++
++#define AR8337_PAD_MAC06_EXCHANGE_EN BIT(31)
++
++enum ar8327_led_pattern {
++ AR8327_LED_PATTERN_OFF = 0,
++ AR8327_LED_PATTERN_BLINK,
++ AR8327_LED_PATTERN_ON,
++ AR8327_LED_PATTERN_RULE,
++};
++
++struct ar8327_led_entry {
++ unsigned reg;
++ unsigned shift;
++};
++
++struct ar8327_led {
++ struct led_classdev cdev;
++ struct ar8xxx_priv *sw_priv;
++
++ char *name;
++ bool active_low;
++ u8 led_num;
++ enum ar8327_led_mode mode;
++
++ struct mutex mutex;
++ spinlock_t lock;
++ struct work_struct led_work;
++ bool enable_hw_mode;
++ enum ar8327_led_pattern pattern;
++};
++
++struct ar8327_data {
++ u32 port0_status;
++ u32 port6_status;
++
++ struct ar8327_led **leds;
++ unsigned int num_leds;
++
++ /* all fields below are cleared on reset */
++ bool eee[AR8XXX_NUM_PHYS];
++};
++
++#endif
+diff -Nur linux-4.1.6.orig/drivers/net/phy/Kconfig linux-4.1.6/drivers/net/phy/Kconfig
+--- linux-4.1.6.orig/drivers/net/phy/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/phy/Kconfig 2015-09-13 22:33:30.867723129 +0200
+@@ -119,6 +119,15 @@
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
++config AR8216_PHY
++ tristate "Driver for Atheros AR8216 switches"
++ select ETHERNET_PACKET_MANGLE
++ select SWCONFIG
++
++config AR8216_PHY_LEDS
++ bool "Atheros AR8216 switch LED support"
++ depends on (AR8216_PHY && LEDS_CLASS)
++
+ config FIXED_PHY
+ tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB
+diff -Nur linux-4.1.6.orig/drivers/net/phy/Makefile linux-4.1.6/drivers/net/phy/Makefile
+--- linux-4.1.6.orig/drivers/net/phy/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/phy/Makefile 2015-09-13 22:55:35.466351180 +0200
+@@ -16,6 +16,7 @@
+ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
+ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+ obj-$(CONFIG_REALTEK_PHY) += realtek.o
++obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+diff -Nur linux-4.1.6.orig/include/linux/ar8216_platform.h linux-4.1.6/include/linux/ar8216_platform.h
+--- linux-4.1.6.orig/include/linux/ar8216_platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/include/linux/ar8216_platform.h 2015-09-13 22:33:30.871722898 +0200
+@@ -0,0 +1,133 @@
++/*
++ * AR8216 switch driver platform data
++ *
++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef AR8216_PLATFORM_H
++#define AR8216_PLATFORM_H
++
++enum ar8327_pad_mode {
++ AR8327_PAD_NC = 0,
++ AR8327_PAD_MAC2MAC_MII,
++ AR8327_PAD_MAC2MAC_GMII,
++ AR8327_PAD_MAC_SGMII,
++ AR8327_PAD_MAC2PHY_MII,
++ AR8327_PAD_MAC2PHY_GMII,
++ AR8327_PAD_MAC_RGMII,
++ AR8327_PAD_PHY_GMII,
++ AR8327_PAD_PHY_RGMII,
++ AR8327_PAD_PHY_MII,
++};
++
++enum ar8327_clk_delay_sel {
++ AR8327_CLK_DELAY_SEL0 = 0,
++ AR8327_CLK_DELAY_SEL1,
++ AR8327_CLK_DELAY_SEL2,
++ AR8327_CLK_DELAY_SEL3,
++};
++
++struct ar8327_pad_cfg {
++ enum ar8327_pad_mode mode;
++ bool rxclk_sel;
++ bool txclk_sel;
++ bool pipe_rxclk_sel;
++ bool txclk_delay_en;
++ bool rxclk_delay_en;
++ bool sgmii_delay_en;
++ enum ar8327_clk_delay_sel txclk_delay_sel;
++ enum ar8327_clk_delay_sel rxclk_delay_sel;
++ bool mac06_exchange_en;
++};
++
++enum ar8327_port_speed {
++ AR8327_PORT_SPEED_10 = 0,
++ AR8327_PORT_SPEED_100,
++ AR8327_PORT_SPEED_1000,
++};
++
++struct ar8327_port_cfg {
++ int force_link:1;
++ enum ar8327_port_speed speed;
++ int txpause:1;
++ int rxpause:1;
++ int duplex:1;
++};
++
++struct ar8327_sgmii_cfg {
++ u32 sgmii_ctrl;
++ bool serdes_aen;
++};
++
++struct ar8327_led_cfg {
++ u32 led_ctrl0;
++ u32 led_ctrl1;
++ u32 led_ctrl2;
++ u32 led_ctrl3;
++ bool open_drain;
++};
++
++enum ar8327_led_num {
++ AR8327_LED_PHY0_0 = 0,
++ AR8327_LED_PHY0_1,
++ AR8327_LED_PHY0_2,
++ AR8327_LED_PHY1_0,
++ AR8327_LED_PHY1_1,
++ AR8327_LED_PHY1_2,
++ AR8327_LED_PHY2_0,
++ AR8327_LED_PHY2_1,
++ AR8327_LED_PHY2_2,
++ AR8327_LED_PHY3_0,
++ AR8327_LED_PHY3_1,
++ AR8327_LED_PHY3_2,
++ AR8327_LED_PHY4_0,
++ AR8327_LED_PHY4_1,
++ AR8327_LED_PHY4_2,
++};
++
++enum ar8327_led_mode {
++ AR8327_LED_MODE_HW = 0,
++ AR8327_LED_MODE_SW,
++};
++
++struct ar8327_led_info {
++ const char *name;
++ const char *default_trigger;
++ bool active_low;
++ enum ar8327_led_num led_num;
++ enum ar8327_led_mode mode;
++};
++
++#define AR8327_LED_INFO(_led, _mode, _name) { \
++ .name = (_name), \
++ .led_num = AR8327_LED_ ## _led, \
++ .mode = AR8327_LED_MODE_ ## _mode \
++}
++
++struct ar8327_platform_data {
++ struct ar8327_pad_cfg *pad0_cfg;
++ struct ar8327_pad_cfg *pad5_cfg;
++ struct ar8327_pad_cfg *pad6_cfg;
++ struct ar8327_sgmii_cfg *sgmii_cfg;
++ struct ar8327_port_cfg port0_cfg;
++ struct ar8327_port_cfg port6_cfg;
++ struct ar8327_led_cfg *led_cfg;
++
++ int (*get_port_link)(unsigned port);
++
++ unsigned num_leds;
++ const struct ar8327_led_info *leds;
++};
++
++#endif /* AR8216_PLATFORM_H */
++
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0016-phy-mdio-bitbang-ignore-TA-value.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0016-phy-mdio-bitbang-ignore-TA-value.patch
new file mode 100644
index 000000000..fe23f4912
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0016-phy-mdio-bitbang-ignore-TA-value.patch
@@ -0,0 +1,44 @@
+From e73f7d9a658c7fc693a9b9c45a1f65c014dd6e40 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 01:17:38 +0200
+Subject: [PATCH] phy: mdio-bitbang: ignore TA value
+
+This is necessary on rb493g to make the kernel detect the second switch.
+---
+ drivers/net/phy/mdio-bitbang.c | 13 ++-----------
+ 1 file changed, 2 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
+index daec9b0..4fa2be0 100644
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
+ static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+ {
+ struct mdiobb_ctrl *ctrl = bus->priv;
+- int ret, i;
++ int ret;
+
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+
+- /* check the turnaround bit: the PHY should be driving it to zero */
+- if (mdiobb_get_bit(ctrl) != 0) {
+- /* PHY didn't drive TA low -- flush any bits it
+- * may be trying to send.
+- */
+- for (i = 0; i < 32; i++)
+- mdiobb_get_bit(ctrl);
+-
+- return 0xffff;
+- }
++ mdiobb_get_bit(ctrl);
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0017-MIPS-ath79-fix-maximum-timeout.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0017-MIPS-ath79-fix-maximum-timeout.patch
new file mode 100644
index 000000000..3ca02783d
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0017-MIPS-ath79-fix-maximum-timeout.patch
@@ -0,0 +1,37 @@
+From 54d01581baa903adb8515625d98652ed43efba36 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 01:21:59 +0200
+Subject: [PATCH] MIPS: ath79: fix maximum timeout
+
+If the userland tries to set a timeout higher than the max_timeout, then
+we should fallback to max_timeout.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/watchdog/ath79_wdt.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c
+index 9fa1f69..bf26baf 100644
+--- a/drivers/watchdog/ath79_wdt.c
++++ b/drivers/watchdog/ath79_wdt.c
+@@ -105,10 +105,14 @@ static inline void ath79_wdt_disable(void)
+
+ static int ath79_wdt_set_timeout(int val)
+ {
+- if (val < 1 || val > max_timeout)
++ if (val < 1)
+ return -EINVAL;
+
+- timeout = val;
++ if (val > max_timeout)
++ timeout = max_timeout;
++ else
++ timeout = val;
++
+ ath79_wdt_keepalive();
+
+ return 0;
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0018-net-allow-PHY-drivers-to-insert-packet-mangle-hooks.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0018-net-allow-PHY-drivers-to-insert-packet-mangle-hooks.patch
new file mode 100644
index 000000000..1a94f7e54
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0018-net-allow-PHY-drivers-to-insert-packet-mangle-hooks.patch
@@ -0,0 +1,167 @@
+diff -Nur linux-4.1.6.orig/include/linux/netdevice.h linux-4.1.6/include/linux/netdevice.h
+--- linux-4.1.6.orig/include/linux/netdevice.h 2015-09-13 22:24:50.977669635 +0200
++++ linux-4.1.6/include/linux/netdevice.h 2015-09-13 22:25:26.259637337 +0200
+@@ -1270,6 +1270,7 @@
+ IFF_XMIT_DST_RELEASE_PERM = 1<<22,
+ IFF_IPVLAN_MASTER = 1<<23,
+ IFF_IPVLAN_SLAVE = 1<<24,
++ IFF_NO_IP_ALIGN = 1<<25,
+ };
+
+ #define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
+@@ -1297,6 +1298,7 @@
+ #define IFF_XMIT_DST_RELEASE_PERM IFF_XMIT_DST_RELEASE_PERM
+ #define IFF_IPVLAN_MASTER IFF_IPVLAN_MASTER
+ #define IFF_IPVLAN_SLAVE IFF_IPVLAN_SLAVE
++#define IFF_NO_IP_ALIGN IFF_NO_IP_ALIGN
+
+ /**
+ * struct net_device - The DEVICE structure.
+@@ -1567,6 +1569,11 @@
+ const struct swdev_ops *swdev_ops;
+ #endif
+
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
++ struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
++#endif
++
+ const struct header_ops *header_ops;
+
+ unsigned int flags;
+@@ -1631,6 +1638,10 @@
+ struct mpls_dev __rcu *mpls_ptr;
+ #endif
+
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ void *phy_ptr; /* PHY device specific data */
++#endif
++
+ /*
+ * Cache lines mostly used on receive path (including eth_type_trans())
+ */
+diff -Nur linux-4.1.6.orig/include/linux/skbuff.h linux-4.1.6/include/linux/skbuff.h
+--- linux-4.1.6.orig/include/linux/skbuff.h 2015-09-13 22:24:50.981669405 +0200
++++ linux-4.1.6/include/linux/skbuff.h 2015-09-13 22:25:26.267636876 +0200
+@@ -2068,6 +2068,10 @@
+ return (len < skb->len) ? __pskb_trim(skb, len) : 0;
+ }
+
++extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
++ unsigned int length, gfp_t gfp);
++
++
+ /**
+ * pskb_trim_unique - remove end from a paged unique (not cloned) buffer
+ * @skb: buffer to alter
+@@ -2176,16 +2180,6 @@
+ }
+
+
+-static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
+- unsigned int length, gfp_t gfp)
+-{
+- struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
+-
+- if (NET_IP_ALIGN && skb)
+- skb_reserve(skb, NET_IP_ALIGN);
+- return skb;
+-}
+-
+ static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
+ unsigned int length)
+ {
+diff -Nur linux-4.1.6.orig/net/core/dev.c linux-4.1.6/net/core/dev.c
+--- linux-4.1.6.orig/net/core/dev.c 2015-09-13 22:24:51.109662032 +0200
++++ linux-4.1.6/net/core/dev.c 2015-09-13 22:25:26.267636876 +0200
+@@ -2657,10 +2657,20 @@
+ if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
+ dev_queue_xmit_nit(skb, dev);
+
+- len = skb->len;
+- trace_net_dev_start_xmit(skb, dev);
+- rc = netdev_start_xmit(skb, dev, txq, more);
+- trace_net_dev_xmit(skb, rc, dev, len);
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ if (!dev->eth_mangle_tx ||
++ (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
++#else
++ if (1)
++#endif
++ {
++ len = skb->len;
++ trace_net_dev_start_xmit(skb, dev);
++ rc = netdev_start_xmit(skb, dev, txq, more);
++ trace_net_dev_xmit(skb, rc, dev, len);
++ } else {
++ rc = NETDEV_TX_OK;
++ }
+
+ return rc;
+ }
+diff -Nur linux-4.1.6.orig/net/core/skbuff.c linux-4.1.6/net/core/skbuff.c
+--- linux-4.1.6.orig/net/core/skbuff.c 2015-09-13 22:24:51.113661802 +0200
++++ linux-4.1.6/net/core/skbuff.c 2015-09-13 22:25:49.410303821 +0200
+@@ -63,6 +63,7 @@
+ #include <linux/errqueue.h>
+ #include <linux/prefetch.h>
+ #include <linux/if_vlan.h>
++#include <linux/if.h>
+ #include <linux/locallock.h>
+
+ #include <net/protocol.h>
+@@ -570,6 +571,22 @@
+ }
+ EXPORT_SYMBOL(__napi_alloc_skb);
+
++struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
++ unsigned int length, gfp_t gfp)
++{
++ struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
++
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
++ return skb;
++#endif
++
++ if (NET_IP_ALIGN && skb)
++ skb_reserve(skb, NET_IP_ALIGN);
++ return skb;
++}
++EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
++
+ void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
+ int size, unsigned int truesize)
+ {
+diff -Nur linux-4.1.6.orig/net/ethernet/eth.c linux-4.1.6/net/ethernet/eth.c
+--- linux-4.1.6.orig/net/ethernet/eth.c 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/net/ethernet/eth.c 2015-09-13 22:25:26.271636646 +0200
+@@ -155,6 +155,12 @@
+ const struct ethhdr *eth;
+
+ skb->dev = dev;
++
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++ if (dev->eth_mangle_rx)
++ dev->eth_mangle_rx(dev, skb);
++#endif
++
+ skb_reset_mac_header(skb);
+ skb_pull_inline(skb, ETH_HLEN);
+ eth = eth_hdr(skb);
+diff -Nur linux-4.1.6.orig/net/Kconfig linux-4.1.6/net/Kconfig
+--- linux-4.1.6.orig/net/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/net/Kconfig 2015-09-13 22:25:26.279636185 +0200
+@@ -25,6 +25,12 @@
+
+ if NET
+
++config ETHERNET_PACKET_MANGLE
++ bool
++ help
++ This option can be selected by phy drivers that need to mangle
++ packets going in or out of an ethernet device.
++
+ config WANT_COMPAT_NETLINK_MESSAGES
+ bool
+ help
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0019-MIPS-ath79-process-board-cmdline-option.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0019-MIPS-ath79-process-board-cmdline-option.patch
new file mode 100644
index 000000000..13eae3b8c
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0019-MIPS-ath79-process-board-cmdline-option.patch
@@ -0,0 +1,26 @@
+From 4c84b317734842765cb1c52624fc569efd9222dc Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 02:11:59 +0200
+Subject: [PATCH] MIPS: ath79: process board cmdline option
+
+This is necessary to correctly identify the running machine.
+---
+ arch/mips/ath79/setup.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
+index 64807a4..0c95758 100644
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -229,6 +229,8 @@ void __init plat_time_init(void)
+ mips_hpt_frequency = cpu_clk_rate / 2;
+ }
+
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+ ath79_gpio_init();
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0020-spi-ath79-add-fast-flash-read-support.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0020-spi-ath79-add-fast-flash-read-support.patch
new file mode 100644
index 000000000..8fd174448
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0020-spi-ath79-add-fast-flash-read-support.patch
@@ -0,0 +1,202 @@
+From c4388a57860440e23c9654f4de2f515433e685a1 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 13 May 2014 04:12:35 +0200
+Subject: [PATCH] spi-ath79: add fast flash read support
+
+---
+ .../include/asm/mach-ath79/ath79_spi_platform.h | 1 +
+ drivers/spi/spi-ath79.c | 124 ++++++++++++++++++++-
+ 2 files changed, 120 insertions(+), 5 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+index aa2283e..65369fe 100644
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -18,6 +18,7 @@ struct ath79_spi_platform_data {
+
+ struct ath79_spi_controller_data {
+ unsigned gpio;
++ bool is_flash;
+ };
+
+ #endif /* _ATH79_SPI_PLATFORM_H */
+diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
+index c3b2fb9..a26a6a4 100644
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -35,6 +35,11 @@
+ #define ATH79_SPI_RRW_DELAY_FACTOR 12000
+ #define MHZ (1000 * 1000)
+
++enum ath79_spi_state {
++ ATH79_SPI_STATE_WAIT_CMD = 0,
++ ATH79_SPI_STATE_WAIT_READ,
++};
++
+ struct ath79_spi {
+ struct spi_bitbang bitbang;
+ u32 ioc_base;
+@@ -42,6 +47,11 @@ struct ath79_spi {
+ void __iomem *base;
+ struct clk *clk;
+ unsigned rrw_delay;
++
++ enum ath79_spi_state state;
++ u32 clk_div;
++ unsigned long read_addr;
++ unsigned long ahb_rate;
+ };
+
+ static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+@@ -104,9 +114,6 @@ static void ath79_spi_enable(struct ath79_spi *sp)
+ /* save CTRL register */
+ sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
+ sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
+-
+- /* TODO: setup speed? */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ }
+
+ static void ath79_spi_disable(struct ath79_spi *sp)
+@@ -203,6 +210,110 @@ static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs,
+ return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
+ }
+
++static int ath79_spi_do_read_flash_data(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++
++ /* disable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++
++ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
++
++ /* enable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
++
++ /* restore IOC register */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
++
++ return t->len;
++}
++
++static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++ int len;
++ const u8 *p;
++
++ sp->read_addr = 0;
++
++ len = t->len - 1;
++ p = t->tx_buf;
++
++ while (len--) {
++ p++;
++ sp->read_addr <<= 8;
++ sp->read_addr |= *p;
++ }
++
++ return t->len;
++}
++
++static bool ath79_spi_is_read_cmd(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ return t->type == SPI_TRANSFER_FLASH_READ_CMD;
++}
++
++static bool ath79_spi_is_data_read(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ return t->type == SPI_TRANSFER_FLASH_READ_DATA;
++}
++
++static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++ int ret;
++
++ switch (sp->state) {
++ case ATH79_SPI_STATE_WAIT_CMD:
++ if (ath79_spi_is_read_cmd(spi, t)) {
++ ret = ath79_spi_do_read_flash_cmd(spi, t);
++ sp->state = ATH79_SPI_STATE_WAIT_READ;
++ } else {
++ ret = spi_bitbang_bufs(spi, t);
++ }
++ break;
++
++ case ATH79_SPI_STATE_WAIT_READ:
++ if (ath79_spi_is_data_read(spi, t)) {
++ ret = ath79_spi_do_read_flash_data(spi, t);
++ } else {
++ dev_warn(&spi->dev, "flash data read expected\n");
++ ret = -EIO;
++ }
++ sp->state = ATH79_SPI_STATE_WAIT_CMD;
++ break;
++
++ default:
++ BUG();
++ }
++
++ return ret;
++}
++
++static int ath79_spi_setup_transfer(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++ struct ath79_spi_controller_data *cdata;
++ int ret;
++
++ ret = spi_bitbang_setup_transfer(spi, t);
++ if (ret)
++ return ret;
++
++ cdata = spi->controller_data;
++ if (cdata->is_flash)
++ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
++ else
++ sp->bitbang.txrx_bufs = spi_bitbang_bufs;
++
++ return ret;
++}
++
+ static int ath79_spi_probe(struct platform_device *pdev)
+ {
+ struct spi_master *master;
+@@ -223,6 +334,8 @@ static int ath79_spi_probe(struct platform_device *pdev)
+
+ pdata = dev_get_platdata(&pdev->dev);
+
++ sp->state = ATH79_SPI_STATE_WAIT_CMD;
++
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+ master->setup = ath79_spi_setup;
+ master->cleanup = ath79_spi_cleanup;
+@@ -234,7 +347,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
+ sp->bitbang.master = master;
+ sp->bitbang.chipselect = ath79_spi_chipselect;
+ sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
+- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
++ sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
+ sp->bitbang.flags = SPI_CS_HIGH;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -259,7 +372,8 @@ static int ath79_spi_probe(struct platform_device *pdev)
+ if (ret)
+ goto err_put_master;
+
+- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
++ sp->ahb_rate = clk_get_rate(sp->clk);
++ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_clk_disable;
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0021-phy-add-mdio-boardinfo.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0021-phy-add-mdio-boardinfo.patch
new file mode 100644
index 000000000..1c760927d
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0021-phy-add-mdio-boardinfo.patch
@@ -0,0 +1,199 @@
+diff -Nur linux-4.1.6.orig/drivers/net/Makefile linux-4.1.6/drivers/net/Makefile
+--- linux-4.1.6.orig/drivers/net/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/Makefile 2015-09-13 20:42:49.905256073 +0200
+@@ -16,7 +16,7 @@
+ obj-$(CONFIG_MDIO) += mdio.o
+ obj-$(CONFIG_NET) += Space.o loopback.o
+ obj-$(CONFIG_NETCONSOLE) += netconsole.o
+-obj-$(CONFIG_PHYLIB) += phy/
++obj-y += phy/
+ obj-$(CONFIG_RIONET) += rionet.o
+ obj-$(CONFIG_NET_TEAM) += team/
+ obj-$(CONFIG_TUN) += tun.o
+diff -Nur linux-4.1.6.orig/drivers/net/phy/Kconfig linux-4.1.6/drivers/net/phy/Kconfig
+--- linux-4.1.6.orig/drivers/net/phy/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/phy/Kconfig 2015-09-13 20:43:24.979410253 +0200
+@@ -12,6 +12,10 @@
+
+ if PHYLIB
+
++config MDIO_BOARDINFO
++ bool
++ default y
++
+ comment "MII PHY device drivers"
+
+ config AT803X_PHY
+diff -Nur linux-4.1.6.orig/drivers/net/phy/Makefile linux-4.1.6/drivers/net/phy/Makefile
+--- linux-4.1.6.orig/drivers/net/phy/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/phy/Makefile 2015-09-13 20:42:49.917255441 +0200
+@@ -2,6 +2,8 @@
+
+ libphy-objs := phy.o phy_device.o mdio_bus.o
+
++obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
++
+ obj-$(CONFIG_PHYLIB) += libphy.o
+ obj-$(CONFIG_MARVELL_PHY) += marvell.o
+ obj-$(CONFIG_DAVICOM_PHY) += davicom.o
+diff -Nur linux-4.1.6.orig/drivers/net/phy/mdio-boardinfo.c linux-4.1.6/drivers/net/phy/mdio-boardinfo.c
+--- linux-4.1.6.orig/drivers/net/phy/mdio-boardinfo.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/mdio-boardinfo.c 2015-09-13 20:42:49.917255441 +0200
+@@ -0,0 +1,58 @@
++/*
++ * mdio-boardinfo.c - collect pre-declarations of PHY devices
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/phy.h>
++#include <linux/slab.h>
++#include <linux/export.h>
++#include <linux/mutex.h>
++#include <linux/phy.h>
++
++#include "mdio-boardinfo.h"
++
++/*
++ * These symbols are exported ONLY FOR the mdio_bus component.
++ * No other users will be supported.
++ */
++
++LIST_HEAD(__mdio_board_list);
++EXPORT_SYMBOL_GPL(__mdio_board_list);
++
++DEFINE_MUTEX(__mdio_board_lock);
++EXPORT_SYMBOL_GPL(__mdio_board_lock);
++
++/**
++ * mdio_register_board_info - register PHY devices for a given board
++ * @info: array of chip descriptors
++ * @n: how many descriptors are provided
++ * Context: can sleep
++ *
++ * The board info passed can safely be __initdata ... but be careful of
++ * any embedded pointers (platform_data, etc), they're copied as-is.
++ */
++int __init
++mdiobus_register_board_info(struct mdio_board_info const *info, unsigned n)
++{
++ struct mdio_board_entry *be;
++ int i;
++
++ be = kzalloc(n * sizeof(*be), GFP_KERNEL);
++ if (!be)
++ return -ENOMEM;
++
++ for (i = 0; i < n; i++, be++, info++) {
++ memcpy(&be->board_info, info, sizeof(*info));
++ mutex_lock(&__mdio_board_lock);
++ list_add_tail(&be->list, &__mdio_board_list);
++ mutex_unlock(&__mdio_board_lock);
++ }
++
++ return 0;
++}
+diff -Nur linux-4.1.6.orig/drivers/net/phy/mdio-boardinfo.h linux-4.1.6/drivers/net/phy/mdio-boardinfo.h
+--- linux-4.1.6.orig/drivers/net/phy/mdio-boardinfo.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/net/phy/mdio-boardinfo.h 2015-09-13 20:42:49.917255441 +0200
+@@ -0,0 +1,22 @@
++/*
++ * mdio-boardinfo.h - boardinfo interface internal to the mdio_bus component
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/mutex.h>
++
++struct mdio_board_entry {
++ struct list_head list;
++ struct mdio_board_info board_info;
++};
++
++/* __mdio_board_lock protects __mdio_board_list
++ * only mdio_bus components are allowed to use these symbols.
++ */
++extern struct mutex __mdio_board_lock;
++extern struct list_head __mdio_board_list;
+diff -Nur linux-4.1.6.orig/drivers/net/phy/mdio_bus.c linux-4.1.6/drivers/net/phy/mdio_bus.c
+--- linux-4.1.6.orig/drivers/net/phy/mdio_bus.c 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/net/phy/mdio_bus.c 2015-09-13 20:45:13.149717661 +0200
+@@ -38,6 +38,8 @@
+
+ #include <asm/irq.h>
+
++#include "mdio-boardinfo.h"
++
+ /**
+ * mdiobus_alloc_size - allocate a mii_bus structure
+ * @size: extra amount of memory to allocate for private storage.
+@@ -335,15 +337,33 @@
+ }
+ EXPORT_SYMBOL(mdiobus_free);
+
++static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus,
++ struct phy_device *phydev,
++ struct mdio_board_info *bi)
++{
++ if (strcmp(bus->id, bi->bus_id) ||
++ bi->phy_addr != phydev->addr)
++ return;
++
++ phydev->dev.platform_data = (void *) bi->platform_data;
++}
++
+ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
+ {
+ struct phy_device *phydev;
++ struct mdio_board_entry *be;
+ int err;
+
+ phydev = get_phy_device(bus, addr, false);
+ if (IS_ERR(phydev) || phydev == NULL)
+ return phydev;
+
++ mutex_lock(&__mdio_board_lock);
++ list_for_each_entry(be, &__mdio_board_list, list)
++ mdiobus_setup_phydev_from_boardinfo(bus, phydev,
++ &be->board_info);
++ mutex_unlock(&__mdio_board_lock);
++
+ /*
+ * For DT, see if the auto-probed phy has a correspoding child
+ * in the bus node, and set the of_node pointer in this case.
+diff -Nur linux-4.1.6.orig/include/linux/phy.h linux-4.1.6/include/linux/phy.h
+--- linux-4.1.6.orig/include/linux/phy.h 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/include/linux/phy.h 2015-09-13 20:46:09.506751805 +0200
+@@ -787,6 +787,23 @@
+
+ extern struct bus_type mdio_bus_type;
+
++struct mdio_board_info {
++ const char *bus_id;
++ int phy_addr;
++
++ const void *platform_data;
++};
++
++#ifdef CONFIG_MDIO_BOARDINFO
++int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n);
++#else
++static inline int
++mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n)
++{
++ return 0;
++}
++#endif
++
+ /**
+ * module_phy_driver() - Helper macro for registering PHY drivers
+ * @__phy_drivers: array of PHY drivers to register
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0022-mips-ath79-add-ath79-ethernet-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0022-mips-ath79-add-ath79-ethernet-driver.patch
new file mode 100644
index 000000000..a7eff47b1
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0022-mips-ath79-add-ath79-ethernet-driver.patch
@@ -0,0 +1,1429 @@
+From 0c6bdad5f210f5f2fe28dc197ab77a36402bb36e Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Wed, 14 May 2014 03:08:37 +0200
+Subject: [PATCH] mips: ath79: add ath79 ethernet driver
+
+---
+ arch/mips/ath79/Kconfig | 3 +
+ arch/mips/ath79/Makefile | 1 +
+ arch/mips/ath79/dev-eth.c | 1151 ++++++++++++++++++++++++
+ arch/mips/ath79/dev-eth.h | 51 ++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 81 ++
+ 5 files changed, 1287 insertions(+)
+ create mode 100644 arch/mips/ath79/dev-eth.c
+ create mode 100644 arch/mips/ath79/dev-eth.h
+
+diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
+index 3995e31..52cefd7 100644
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -109,6 +109,9 @@ config SOC_QCA955X
+ config PCI_AR724X
+ def_bool n
+
++config ATH79_DEV_ETH
++ def_bool n
++
+ config ATH79_DEV_GPIO_BUTTONS
+ def_bool n
+
+diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
+index 5c9ff69..05485da 100644
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_PCI) += pci.o
+ # Devices
+ #
+ obj-y += dev-common.o
++obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o
+ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
+ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
+ obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
+diff --git a/arch/mips/ath79/dev-eth.c b/arch/mips/ath79/dev-eth.c
+new file mode 100644
+index 0000000..21feeb9
+--- /dev/null
++++ b/arch/mips/ath79/dev-eth.c
+@@ -0,0 +1,1151 @@
++/*
++ * Atheros AR71xx SoC platform devices
++ *
++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
++ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros 2.6.15 BSP
++ * Parts of this file are based on Atheros 2.6.31 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/etherdevice.h>
++#include <linux/platform_device.h>
++#include <linux/serial_8250.h>
++#include <linux/clk.h>
++#include <linux/sizes.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/irq.h>
++
++#include "common.h"
++#include "dev-eth.h"
++
++unsigned char ath79_mac_base[ETH_ALEN] __initdata;
++
++static struct resource ath79_mdio0_resources[] = {
++ {
++ .name = "mdio_base",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE0_BASE,
++ .end = AR71XX_GE0_BASE + 0x200 - 1,
++ }
++};
++
++struct ag71xx_mdio_platform_data ath79_mdio0_data;
++
++struct platform_device ath79_mdio0_device = {
++ .name = "ag71xx-mdio",
++ .id = 0,
++ .resource = ath79_mdio0_resources,
++ .num_resources = ARRAY_SIZE(ath79_mdio0_resources),
++ .dev = {
++ .platform_data = &ath79_mdio0_data,
++ },
++};
++
++static struct resource ath79_mdio1_resources[] = {
++ {
++ .name = "mdio_base",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE1_BASE,
++ .end = AR71XX_GE1_BASE + 0x200 - 1,
++ }
++};
++
++struct ag71xx_mdio_platform_data ath79_mdio1_data;
++
++struct platform_device ath79_mdio1_device = {
++ .name = "ag71xx-mdio",
++ .id = 1,
++ .resource = ath79_mdio1_resources,
++ .num_resources = ARRAY_SIZE(ath79_mdio1_resources),
++ .dev = {
++ .platform_data = &ath79_mdio1_data,
++ },
++};
++
++static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
++{
++ void __iomem *base;
++ u32 t;
++
++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++
++ t = __raw_readl(base + cfg_reg);
++ t &= ~(3 << shift);
++ t |= (2 << shift);
++ __raw_writel(t, base + cfg_reg);
++ udelay(100);
++
++ __raw_writel(pll_val, base + pll_reg);
++
++ t |= (3 << shift);
++ __raw_writel(t, base + cfg_reg);
++ udelay(100);
++
++ t &= ~(3 << shift);
++ __raw_writel(t, base + cfg_reg);
++ udelay(100);
++
++ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
++ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
++
++ iounmap(base);
++}
++
++static void __init ath79_mii_ctrl_set_if(unsigned int reg,
++ unsigned int mii_if)
++{
++ void __iomem *base;
++ u32 t;
++
++ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
++
++ t = __raw_readl(base + reg);
++ t &= ~(AR71XX_MII_CTRL_IF_MASK);
++ t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
++ __raw_writel(t, base + reg);
++
++ iounmap(base);
++}
++
++static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
++{
++ void __iomem *base;
++ unsigned int mii_speed;
++ u32 t;
++
++ switch (speed) {
++ case SPEED_10:
++ mii_speed = AR71XX_MII_CTRL_SPEED_10;
++ break;
++ case SPEED_100:
++ mii_speed = AR71XX_MII_CTRL_SPEED_100;
++ break;
++ case SPEED_1000:
++ mii_speed = AR71XX_MII_CTRL_SPEED_1000;
++ break;
++ default:
++ BUG();
++ }
++
++ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
++
++ t = __raw_readl(base + reg);
++ t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
++ t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT;
++ __raw_writel(t, base + reg);
++
++ iounmap(base);
++}
++
++static unsigned long ar934x_get_mdio_ref_clock(void)
++{
++ void __iomem *base;
++ unsigned long ret;
++ u32 t;
++
++ base = ioremap(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++
++ ret = 0;
++ t = __raw_readl(base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
++ if (t & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) {
++ ret = 100 * 1000 * 1000;
++ } else {
++ struct clk *clk;
++
++ clk = clk_get(NULL, "ref");
++ if (!IS_ERR(clk))
++ ret = clk_get_rate(clk);
++ }
++
++ iounmap(base);
++
++ return ret;
++}
++
++void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
++{
++ struct platform_device *mdio_dev;
++ struct ag71xx_mdio_platform_data *mdio_data;
++ unsigned int max_id;
++
++ if (ath79_soc == ATH79_SOC_AR9341 ||
++ ath79_soc == ATH79_SOC_AR9342 ||
++ ath79_soc == ATH79_SOC_AR9344 ||
++ ath79_soc == ATH79_SOC_QCA9556 ||
++ ath79_soc == ATH79_SOC_QCA9558)
++ max_id = 1;
++ else
++ max_id = 0;
++
++ if (id > max_id) {
++ printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
++ return;
++ }
++
++ switch (ath79_soc) {
++ case ATH79_SOC_AR7241:
++ case ATH79_SOC_AR9330:
++ case ATH79_SOC_AR9331:
++ mdio_dev = &ath79_mdio1_device;
++ mdio_data = &ath79_mdio1_data;
++ break;
++
++ case ATH79_SOC_AR9341:
++ case ATH79_SOC_AR9342:
++ case ATH79_SOC_AR9344:
++ case ATH79_SOC_QCA9556:
++ case ATH79_SOC_QCA9558:
++ if (id == 0) {
++ mdio_dev = &ath79_mdio0_device;
++ mdio_data = &ath79_mdio0_data;
++ } else {
++ mdio_dev = &ath79_mdio1_device;
++ mdio_data = &ath79_mdio1_data;
++ }
++ break;
++
++ case ATH79_SOC_AR7242:
++ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
++ AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
++ AR71XX_ETH0_PLL_SHIFT);
++ /* fall through */
++ default:
++ mdio_dev = &ath79_mdio0_device;
++ mdio_data = &ath79_mdio0_data;
++ break;
++ }
++
++ mdio_data->phy_mask = phy_mask;
++
++ switch (ath79_soc) {
++ case ATH79_SOC_AR7240:
++ mdio_data->is_ar7240 = 1;
++ /* fall through */
++ case ATH79_SOC_AR7241:
++ mdio_data->builtin_switch = 1;
++ break;
++
++ case ATH79_SOC_AR9330:
++ mdio_data->is_ar9330 = 1;
++ /* fall through */
++ case ATH79_SOC_AR9331:
++ mdio_data->builtin_switch = 1;
++ break;
++
++ case ATH79_SOC_AR9341:
++ case ATH79_SOC_AR9342:
++ case ATH79_SOC_AR9344:
++ if (id == 1) {
++ mdio_data->builtin_switch = 1;
++ mdio_data->ref_clock = ar934x_get_mdio_ref_clock();
++ mdio_data->mdio_clock = 6250000;
++ }
++ mdio_data->is_ar934x = 1;
++ break;
++
++ case ATH79_SOC_QCA9556:
++ case ATH79_SOC_QCA9558:
++ mdio_data->is_ar934x = 1;
++ break;
++
++ default:
++ break;
++ }
++
++ platform_device_register(mdio_dev);
++}
++
++struct ath79_eth_pll_data ath79_eth0_pll_data;
++struct ath79_eth_pll_data ath79_eth1_pll_data;
++
++static u32 ath79_get_eth_pll(unsigned int mac, int speed)
++{
++ struct ath79_eth_pll_data *pll_data;
++ u32 pll_val;
++
++ switch (mac) {
++ case 0:
++ pll_data = &ath79_eth0_pll_data;
++ break;
++ case 1:
++ pll_data = &ath79_eth1_pll_data;
++ break;
++ default:
++ BUG();
++ }
++
++ switch (speed) {
++ case SPEED_10:
++ pll_val = pll_data->pll_10;
++ break;
++ case SPEED_100:
++ pll_val = pll_data->pll_100;
++ break;
++ case SPEED_1000:
++ pll_val = pll_data->pll_1000;
++ break;
++ default:
++ BUG();
++ }
++
++ return pll_val;
++}
++
++static void ath79_set_speed_ge0(int speed)
++{
++ u32 val = ath79_get_eth_pll(0, speed);
++
++ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
++ val, AR71XX_ETH0_PLL_SHIFT);
++ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
++}
++
++static void ath79_set_speed_ge1(int speed)
++{
++ u32 val = ath79_get_eth_pll(1, speed);
++
++ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
++ val, AR71XX_ETH1_PLL_SHIFT);
++ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
++}
++
++static void ar7242_set_speed_ge0(int speed)
++{
++ u32 val = ath79_get_eth_pll(0, speed);
++ void __iomem *base;
++
++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++ __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
++ iounmap(base);
++}
++
++static void ar91xx_set_speed_ge0(int speed)
++{
++ u32 val = ath79_get_eth_pll(0, speed);
++
++ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
++ val, AR913X_ETH0_PLL_SHIFT);
++ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
++}
++
++static void ar91xx_set_speed_ge1(int speed)
++{
++ u32 val = ath79_get_eth_pll(1, speed);
++
++ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
++ val, AR913X_ETH1_PLL_SHIFT);
++ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
++}
++
++static void ar934x_set_speed_ge0(int speed)
++{
++ void __iomem *base;
++ u32 val = ath79_get_eth_pll(0, speed);
++
++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++ __raw_writel(val, base + AR934X_PLL_ETH_XMII_CONTROL_REG);
++ iounmap(base);
++}
++
++static void qca955x_set_speed_xmii(int speed)
++{
++ void __iomem *base;
++ u32 val = ath79_get_eth_pll(0, speed);
++
++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++ __raw_writel(val, base + QCA955X_PLL_ETH_XMII_CONTROL_REG);
++ iounmap(base);
++}
++
++static void qca955x_set_speed_sgmii(int speed)
++{
++ void __iomem *base;
++ u32 val = ath79_get_eth_pll(1, speed);
++
++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++ __raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG);
++ iounmap(base);
++}
++
++static void ath79_set_speed_dummy(int speed)
++{
++}
++
++static void ath79_ddr_no_flush(void)
++{
++}
++
++static void ath79_ddr_flush_ge0(void)
++{
++ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
++}
++
++static void ath79_ddr_flush_ge1(void)
++{
++ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1);
++}
++
++static void ar724x_ddr_flush_ge0(void)
++{
++ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0);
++}
++
++static void ar724x_ddr_flush_ge1(void)
++{
++ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1);
++}
++
++static void ar91xx_ddr_flush_ge0(void)
++{
++ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0);
++}
++
++static void ar91xx_ddr_flush_ge1(void)
++{
++ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1);
++}
++
++static void ar933x_ddr_flush_ge0(void)
++{
++ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0);
++}
++
++static void ar933x_ddr_flush_ge1(void)
++{
++ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
++}
++
++static struct resource ath79_eth0_resources[] = {
++ {
++ .name = "mac_base",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE0_BASE,
++ .end = AR71XX_GE0_BASE + 0x200 - 1,
++ }, {
++ .name = "mac_irq",
++ .flags = IORESOURCE_IRQ,
++ .start = ATH79_CPU_IRQ(4),
++ .end = ATH79_CPU_IRQ(4),
++ },
++};
++
++struct ag71xx_platform_data ath79_eth0_data = {
++ .reset_bit = AR71XX_RESET_GE0_MAC,
++};
++
++struct platform_device ath79_eth0_device = {
++ .name = "ag71xx",
++ .id = 0,
++ .resource = ath79_eth0_resources,
++ .num_resources = ARRAY_SIZE(ath79_eth0_resources),
++ .dev = {
++ .platform_data = &ath79_eth0_data,
++ },
++};
++
++static struct resource ath79_eth1_resources[] = {
++ {
++ .name = "mac_base",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE1_BASE,
++ .end = AR71XX_GE1_BASE + 0x200 - 1,
++ }, {
++ .name = "mac_irq",
++ .flags = IORESOURCE_IRQ,
++ .start = ATH79_CPU_IRQ(5),
++ .end = ATH79_CPU_IRQ(5),
++ },
++};
++
++struct ag71xx_platform_data ath79_eth1_data = {
++ .reset_bit = AR71XX_RESET_GE1_MAC,
++};
++
++struct platform_device ath79_eth1_device = {
++ .name = "ag71xx",
++ .id = 1,
++ .resource = ath79_eth1_resources,
++ .num_resources = ARRAY_SIZE(ath79_eth1_resources),
++ .dev = {
++ .platform_data = &ath79_eth1_data,
++ },
++};
++
++struct ag71xx_switch_platform_data ath79_switch_data;
++
++#define AR71XX_PLL_VAL_1000 0x00110000
++#define AR71XX_PLL_VAL_100 0x00001099
++#define AR71XX_PLL_VAL_10 0x00991099
++
++#define AR724X_PLL_VAL_1000 0x00110000
++#define AR724X_PLL_VAL_100 0x00001099
++#define AR724X_PLL_VAL_10 0x00991099
++
++#define AR7242_PLL_VAL_1000 0x16000000
++#define AR7242_PLL_VAL_100 0x00000101
++#define AR7242_PLL_VAL_10 0x00001616
++
++#define AR913X_PLL_VAL_1000 0x1a000000
++#define AR913X_PLL_VAL_100 0x13000a44
++#define AR913X_PLL_VAL_10 0x00441099
++
++#define AR933X_PLL_VAL_1000 0x00110000
++#define AR933X_PLL_VAL_100 0x00001099
++#define AR933X_PLL_VAL_10 0x00991099
++
++#define AR934X_PLL_VAL_1000 0x16000000
++#define AR934X_PLL_VAL_100 0x00000101
++#define AR934X_PLL_VAL_10 0x00001616
++
++static void __init ath79_init_eth_pll_data(unsigned int id)
++{
++ struct ath79_eth_pll_data *pll_data;
++ u32 pll_10, pll_100, pll_1000;
++
++ switch (id) {
++ case 0:
++ pll_data = &ath79_eth0_pll_data;
++ break;
++ case 1:
++ pll_data = &ath79_eth1_pll_data;
++ break;
++ default:
++ BUG();
++ }
++
++ switch (ath79_soc) {
++ case ATH79_SOC_AR7130:
++ case ATH79_SOC_AR7141:
++ case ATH79_SOC_AR7161:
++ pll_10 = AR71XX_PLL_VAL_10;
++ pll_100 = AR71XX_PLL_VAL_100;
++ pll_1000 = AR71XX_PLL_VAL_1000;
++ break;
++
++ case ATH79_SOC_AR7240:
++ case ATH79_SOC_AR7241:
++ pll_10 = AR724X_PLL_VAL_10;
++ pll_100 = AR724X_PLL_VAL_100;
++ pll_1000 = AR724X_PLL_VAL_1000;
++ break;
++
++ case ATH79_SOC_AR7242:
++ pll_10 = AR7242_PLL_VAL_10;
++ pll_100 = AR7242_PLL_VAL_100;
++ pll_1000 = AR7242_PLL_VAL_1000;
++ break;
++
++ case ATH79_SOC_AR9130:
++ case ATH79_SOC_AR9132:
++ pll_10 = AR913X_PLL_VAL_10;
++ pll_100 = AR913X_PLL_VAL_100;
++ pll_1000 = AR913X_PLL_VAL_1000;
++ break;
++
++ case ATH79_SOC_AR9330:
++ case ATH79_SOC_AR9331:
++ pll_10 = AR933X_PLL_VAL_10;
++ pll_100 = AR933X_PLL_VAL_100;
++ pll_1000 = AR933X_PLL_VAL_1000;
++ break;
++
++ case ATH79_SOC_AR9341:
++ case ATH79_SOC_AR9342:
++ case ATH79_SOC_AR9344:
++ case ATH79_SOC_QCA9556:
++ case ATH79_SOC_QCA9558:
++ pll_10 = AR934X_PLL_VAL_10;
++ pll_100 = AR934X_PLL_VAL_100;
++ pll_1000 = AR934X_PLL_VAL_1000;
++ break;
++
++ default:
++ BUG();
++ }
++
++ if (!pll_data->pll_10)
++ pll_data->pll_10 = pll_10;
++
++ if (!pll_data->pll_100)
++ pll_data->pll_100 = pll_100;
++
++ if (!pll_data->pll_1000)
++ pll_data->pll_1000 = pll_1000;
++}
++
++static int __init ath79_setup_phy_if_mode(unsigned int id,
++ struct ag71xx_platform_data *pdata)
++{
++ unsigned int mii_if;
++
++ switch (id) {
++ case 0:
++ switch (ath79_soc) {
++ case ATH79_SOC_AR7130:
++ case ATH79_SOC_AR7141:
++ case ATH79_SOC_AR7161:
++ case ATH79_SOC_AR9130:
++ case ATH79_SOC_AR9132:
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_MII:
++ mii_if = AR71XX_MII0_CTRL_IF_MII;
++ break;
++ case PHY_INTERFACE_MODE_GMII:
++ mii_if = AR71XX_MII0_CTRL_IF_GMII;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ mii_if = AR71XX_MII0_CTRL_IF_RGMII;
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ mii_if = AR71XX_MII0_CTRL_IF_RMII;
++ break;
++ default:
++ return -EINVAL;
++ }
++ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
++ break;
++
++ case ATH79_SOC_AR7240:
++ case ATH79_SOC_AR7241:
++ case ATH79_SOC_AR9330:
++ case ATH79_SOC_AR9331:
++ pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
++ break;
++
++ case ATH79_SOC_AR7242:
++ /* FIXME */
++
++ case ATH79_SOC_AR9341:
++ case ATH79_SOC_AR9342:
++ case ATH79_SOC_AR9344:
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_MII:
++ case PHY_INTERFACE_MODE_GMII:
++ case PHY_INTERFACE_MODE_RGMII:
++ case PHY_INTERFACE_MODE_RMII:
++ break;
++ default:
++ return -EINVAL;
++ }
++ break;
++
++ case ATH79_SOC_QCA9556:
++ case ATH79_SOC_QCA9558:
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_MII:
++ case PHY_INTERFACE_MODE_RGMII:
++ case PHY_INTERFACE_MODE_SGMII:
++ break;
++ default:
++ return -EINVAL;
++ }
++ break;
++
++ default:
++ BUG();
++ }
++ break;
++ case 1:
++ switch (ath79_soc) {
++ case ATH79_SOC_AR7130:
++ case ATH79_SOC_AR7141:
++ case ATH79_SOC_AR7161:
++ case ATH79_SOC_AR9130:
++ case ATH79_SOC_AR9132:
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_RMII:
++ mii_if = AR71XX_MII1_CTRL_IF_RMII;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ mii_if = AR71XX_MII1_CTRL_IF_RGMII;
++ break;
++ default:
++ return -EINVAL;
++ }
++ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
++ break;
++
++ case ATH79_SOC_AR7240:
++ case ATH79_SOC_AR7241:
++ case ATH79_SOC_AR9330:
++ case ATH79_SOC_AR9331:
++ pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
++ break;
++
++ case ATH79_SOC_AR7242:
++ /* FIXME */
++
++ case ATH79_SOC_AR9341:
++ case ATH79_SOC_AR9342:
++ case ATH79_SOC_AR9344:
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_MII:
++ case PHY_INTERFACE_MODE_GMII:
++ break;
++ default:
++ return -EINVAL;
++ }
++ break;
++
++ case ATH79_SOC_QCA9556:
++ case ATH79_SOC_QCA9558:
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_MII:
++ case PHY_INTERFACE_MODE_RGMII:
++ case PHY_INTERFACE_MODE_SGMII:
++ break;
++ default:
++ return -EINVAL;
++ }
++ break;
++
++ default:
++ BUG();
++ }
++ break;
++ }
++
++ return 0;
++}
++
++void __init ath79_setup_ar933x_phy4_switch(bool mac, bool mdio)
++{
++ void __iomem *base;
++ u32 t;
++
++ base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
++
++ t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
++ t &= ~(AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
++ if (mac)
++ t |= AR933X_ETH_CFG_SW_PHY_SWAP;
++ if (mdio)
++ t |= AR933X_ETH_CFG_SW_PHY_ADDR_SWAP;
++ __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
++
++ iounmap(base);
++}
++
++void __init ath79_setup_ar934x_eth_cfg(u32 mask)
++{
++ void __iomem *base;
++ u32 t;
++
++ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
++
++ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++
++ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 |
++ AR934X_ETH_CFG_MII_GMAC0 |
++ AR934X_ETH_CFG_GMII_GMAC0 |
++ AR934X_ETH_CFG_SW_ONLY_MODE |
++ AR934X_ETH_CFG_SW_PHY_SWAP);
++
++ t |= mask;
++
++ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
++ /* flush write */
++ __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++
++ iounmap(base);
++}
++
++static int ath79_eth_instance __initdata;
++void __init ath79_register_eth(unsigned int id)
++{
++ struct platform_device *pdev;
++ struct ag71xx_platform_data *pdata;
++ int err;
++
++ if (id > 1) {
++ printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
++ return;
++ }
++
++ ath79_init_eth_pll_data(id);
++
++ if (id == 0)
++ pdev = &ath79_eth0_device;
++ else
++ pdev = &ath79_eth1_device;
++
++ pdata = pdev->dev.platform_data;
++
++ pdata->max_frame_len = 1540;
++ pdata->desc_pktlen_mask = 0xfff;
++
++ err = ath79_setup_phy_if_mode(id, pdata);
++ if (err) {
++ printk(KERN_ERR
++ "ar71xx: invalid PHY interface mode for GE%u\n", id);
++ return;
++ }
++
++ switch (ath79_soc) {
++ case ATH79_SOC_AR7130:
++ if (id == 0) {
++ pdata->ddr_flush = ath79_ddr_flush_ge0;
++ pdata->set_speed = ath79_set_speed_ge0;
++ } else {
++ pdata->ddr_flush = ath79_ddr_flush_ge1;
++ pdata->set_speed = ath79_set_speed_ge1;
++ }
++ break;
++
++ case ATH79_SOC_AR7141:
++ case ATH79_SOC_AR7161:
++ if (id == 0) {
++ pdata->ddr_flush = ath79_ddr_flush_ge0;
++ pdata->set_speed = ath79_set_speed_ge0;
++ } else {
++ pdata->ddr_flush = ath79_ddr_flush_ge1;
++ pdata->set_speed = ath79_set_speed_ge1;
++ }
++ pdata->has_gbit = 1;
++ break;
++
++ case ATH79_SOC_AR7242:
++ if (id == 0) {
++ pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
++ AR71XX_RESET_GE0_PHY;
++ pdata->ddr_flush = ar724x_ddr_flush_ge0;
++ pdata->set_speed = ar7242_set_speed_ge0;
++ } else {
++ pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
++ AR71XX_RESET_GE1_PHY;
++ pdata->ddr_flush = ar724x_ddr_flush_ge1;
++ pdata->set_speed = ath79_set_speed_dummy;
++ }
++ pdata->has_gbit = 1;
++ pdata->is_ar724x = 1;
++
++ if (!pdata->fifo_cfg1)
++ pdata->fifo_cfg1 = 0x0010ffff;
++ if (!pdata->fifo_cfg2)
++ pdata->fifo_cfg2 = 0x015500aa;
++ if (!pdata->fifo_cfg3)
++ pdata->fifo_cfg3 = 0x01f00140;
++ break;
++
++ case ATH79_SOC_AR7241:
++ if (id == 0)
++ pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
++ else
++ pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
++ /* fall through */
++ case ATH79_SOC_AR7240:
++ if (id == 0) {
++ pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
++ pdata->ddr_flush = ar724x_ddr_flush_ge0;
++ pdata->set_speed = ath79_set_speed_dummy;
++
++ pdata->phy_mask = BIT(4);
++ } else {
++ pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
++ pdata->ddr_flush = ar724x_ddr_flush_ge1;
++ pdata->set_speed = ath79_set_speed_dummy;
++
++ pdata->speed = SPEED_1000;
++ pdata->duplex = DUPLEX_FULL;
++ pdata->switch_data = &ath79_switch_data;
++
++ ath79_switch_data.phy_poll_mask |= BIT(4);
++ }
++ pdata->has_gbit = 1;
++ pdata->is_ar724x = 1;
++ if (ath79_soc == ATH79_SOC_AR7240)
++ pdata->is_ar7240 = 1;
++
++ if (!pdata->fifo_cfg1)
++ pdata->fifo_cfg1 = 0x0010ffff;
++ if (!pdata->fifo_cfg2)
++ pdata->fifo_cfg2 = 0x015500aa;
++ if (!pdata->fifo_cfg3)
++ pdata->fifo_cfg3 = 0x01f00140;
++ break;
++
++ case ATH79_SOC_AR9130:
++ if (id == 0) {
++ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
++ pdata->set_speed = ar91xx_set_speed_ge0;
++ } else {
++ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
++ pdata->set_speed = ar91xx_set_speed_ge1;
++ }
++ pdata->is_ar91xx = 1;
++ break;
++
++ case ATH79_SOC_AR9132:
++ if (id == 0) {
++ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
++ pdata->set_speed = ar91xx_set_speed_ge0;
++ } else {
++ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
++ pdata->set_speed = ar91xx_set_speed_ge1;
++ }
++ pdata->is_ar91xx = 1;
++ pdata->has_gbit = 1;
++ break;
++
++ case ATH79_SOC_AR9330:
++ case ATH79_SOC_AR9331:
++ if (id == 0) {
++ pdata->reset_bit = AR933X_RESET_GE0_MAC |
++ AR933X_RESET_GE0_MDIO;
++ pdata->ddr_flush = ar933x_ddr_flush_ge0;
++ pdata->set_speed = ath79_set_speed_dummy;
++
++ pdata->phy_mask = BIT(4);
++ } else {
++ pdata->reset_bit = AR933X_RESET_GE1_MAC |
++ AR933X_RESET_GE1_MDIO;
++ pdata->ddr_flush = ar933x_ddr_flush_ge1;
++ pdata->set_speed = ath79_set_speed_dummy;
++
++ pdata->speed = SPEED_1000;
++ pdata->duplex = DUPLEX_FULL;
++ pdata->switch_data = &ath79_switch_data;
++
++ ath79_switch_data.phy_poll_mask |= BIT(4);
++ }
++
++ pdata->has_gbit = 1;
++ pdata->is_ar724x = 1;
++
++ if (!pdata->fifo_cfg1)
++ pdata->fifo_cfg1 = 0x0010ffff;
++ if (!pdata->fifo_cfg2)
++ pdata->fifo_cfg2 = 0x015500aa;
++ if (!pdata->fifo_cfg3)
++ pdata->fifo_cfg3 = 0x01f00140;
++ break;
++
++ case ATH79_SOC_AR9341:
++ case ATH79_SOC_AR9342:
++ case ATH79_SOC_AR9344:
++ if (id == 0) {
++ pdata->reset_bit = AR934X_RESET_GE0_MAC |
++ AR934X_RESET_GE0_MDIO;
++ pdata->set_speed = ar934x_set_speed_ge0;
++ } else {
++ pdata->reset_bit = AR934X_RESET_GE1_MAC |
++ AR934X_RESET_GE1_MDIO;
++ pdata->set_speed = ath79_set_speed_dummy;
++
++ pdata->switch_data = &ath79_switch_data;
++
++ /* reset the built-in switch */
++ ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
++ ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);
++ }
++
++ pdata->ddr_flush = ath79_ddr_no_flush;
++ pdata->has_gbit = 1;
++ pdata->is_ar724x = 1;
++
++ pdata->max_frame_len = SZ_16K - 1;
++ pdata->desc_pktlen_mask = SZ_16K - 1;
++
++ if (!pdata->fifo_cfg1)
++ pdata->fifo_cfg1 = 0x0010ffff;
++ if (!pdata->fifo_cfg2)
++ pdata->fifo_cfg2 = 0x015500aa;
++ if (!pdata->fifo_cfg3)
++ pdata->fifo_cfg3 = 0x01f00140;
++ break;
++
++ case ATH79_SOC_QCA9556:
++ case ATH79_SOC_QCA9558:
++ if (id == 0) {
++ pdata->reset_bit = QCA955X_RESET_GE0_MAC |
++ QCA955X_RESET_GE0_MDIO;
++ pdata->set_speed = qca955x_set_speed_xmii;
++ } else {
++ pdata->reset_bit = QCA955X_RESET_GE1_MAC |
++ QCA955X_RESET_GE1_MDIO;
++ pdata->set_speed = qca955x_set_speed_sgmii;
++ }
++
++ pdata->ddr_flush = ath79_ddr_no_flush;
++ pdata->has_gbit = 1;
++ pdata->is_ar724x = 1;
++
++ /*
++ * Limit the maximum frame length to 4095 bytes.
++ * Although the documentation says that the hardware
++ * limit is 16383 bytes but that does not work in
++ * practice. It seems that the hardware only updates
++ * the lowest 12 bits of the packet length field
++ * in the RX descriptor.
++ */
++ pdata->max_frame_len = SZ_4K - 1;
++ pdata->desc_pktlen_mask = SZ_16K - 1;
++
++ if (!pdata->fifo_cfg1)
++ pdata->fifo_cfg1 = 0x0010ffff;
++ if (!pdata->fifo_cfg2)
++ pdata->fifo_cfg2 = 0x015500aa;
++ if (!pdata->fifo_cfg3)
++ pdata->fifo_cfg3 = 0x01f00140;
++ break;
++
++ default:
++ BUG();
++ }
++
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_GMII:
++ case PHY_INTERFACE_MODE_RGMII:
++ case PHY_INTERFACE_MODE_SGMII:
++ if (!pdata->has_gbit) {
++ printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
++ id);
++ return;
++ }
++ /* fallthrough */
++ default:
++ break;
++ }
++
++ if (!is_valid_ether_addr(pdata->mac_addr)) {
++ random_ether_addr(pdata->mac_addr);
++ printk(KERN_DEBUG
++ "ar71xx: using random MAC address for eth%d\n",
++ ath79_eth_instance);
++ }
++
++ if (pdata->mii_bus_dev == NULL) {
++ switch (ath79_soc) {
++ case ATH79_SOC_AR9341:
++ case ATH79_SOC_AR9342:
++ case ATH79_SOC_AR9344:
++ if (id == 0)
++ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
++ else
++ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
++ break;
++
++ case ATH79_SOC_AR7241:
++ case ATH79_SOC_AR9330:
++ case ATH79_SOC_AR9331:
++ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
++ break;
++
++ case ATH79_SOC_QCA9556:
++ case ATH79_SOC_QCA9558:
++ /* don't assign any MDIO device by default */
++ break;
++
++ default:
++ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
++ break;
++ }
++ }
++
++ /* Reset the device */
++ ath79_device_reset_set(pdata->reset_bit);
++ mdelay(100);
++
++ ath79_device_reset_clear(pdata->reset_bit);
++ mdelay(100);
++
++ platform_device_register(pdev);
++ ath79_eth_instance++;
++}
++
++void __init ath79_set_mac_base(unsigned char *mac)
++{
++ memcpy(ath79_mac_base, mac, ETH_ALEN);
++}
++
++void __init ath79_parse_ascii_mac(char *mac_str, u8 *mac)
++{
++ int t;
++
++ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
++
++ if (t != ETH_ALEN)
++ t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
++ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
++
++ if (t != ETH_ALEN || !is_valid_ether_addr(mac)) {
++ memset(mac, 0, ETH_ALEN);
++ printk(KERN_DEBUG "ar71xx: invalid mac address \"%s\"\n",
++ mac_str);
++ }
++}
++
++static void __init ath79_set_mac_base_ascii(char *str)
++{
++ u8 mac[ETH_ALEN];
++
++ ath79_parse_ascii_mac(str, mac);
++ ath79_set_mac_base(mac);
++}
++
++static int __init ath79_ethaddr_setup(char *str)
++{
++ ath79_set_mac_base_ascii(str);
++ return 1;
++}
++__setup("ethaddr=", ath79_ethaddr_setup);
++
++static int __init ath79_kmac_setup(char *str)
++{
++ ath79_set_mac_base_ascii(str);
++ return 1;
++}
++__setup("kmac=", ath79_kmac_setup);
++
++void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
++ int offset)
++{
++ int t;
++
++ if (!dst)
++ return;
++
++ if (!src || !is_valid_ether_addr(src)) {
++ memset(dst, '\0', ETH_ALEN);
++ return;
++ }
++
++ t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
++ t += offset;
++
++ dst[0] = src[0];
++ dst[1] = src[1];
++ dst[2] = src[2];
++ dst[3] = (t >> 16) & 0xff;
++ dst[4] = (t >> 8) & 0xff;
++ dst[5] = t & 0xff;
++}
++
++void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
++{
++ int i;
++
++ if (!dst)
++ return;
++
++ if (!src || !is_valid_ether_addr(src)) {
++ memset(dst, '\0', ETH_ALEN);
++ return;
++ }
++
++ for (i = 0; i < ETH_ALEN; i++)
++ dst[i] = src[i];
++ dst[0] |= 0x02;
++}
+diff --git a/arch/mips/ath79/dev-eth.h b/arch/mips/ath79/dev-eth.h
+new file mode 100644
+index 0000000..ff26ec4
+--- /dev/null
++++ b/arch/mips/ath79/dev-eth.h
+@@ -0,0 +1,51 @@
++/*
++ * Atheros AR71xx SoC device definitions
++ *
++ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_DEV_ETH_H
++#define _ATH79_DEV_ETH_H
++
++#include <asm/mach-ath79/ag71xx_platform.h>
++
++struct platform_device;
++
++extern unsigned char ath79_mac_base[] __initdata;
++void ath79_parse_ascii_mac(char *mac_str, u8 *mac);
++void ath79_init_mac(unsigned char *dst, const unsigned char *src,
++ int offset);
++void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
++
++struct ath79_eth_pll_data {
++ u32 pll_10;
++ u32 pll_100;
++ u32 pll_1000;
++};
++
++extern struct ath79_eth_pll_data ath79_eth0_pll_data;
++extern struct ath79_eth_pll_data ath79_eth1_pll_data;
++
++extern struct ag71xx_platform_data ath79_eth0_data;
++extern struct ag71xx_platform_data ath79_eth1_data;
++extern struct platform_device ath79_eth0_device;
++extern struct platform_device ath79_eth1_device;
++void ath79_register_eth(unsigned int id);
++
++extern struct ag71xx_switch_platform_data ath79_switch_data;
++
++extern struct ag71xx_mdio_platform_data ath79_mdio0_data;
++extern struct ag71xx_mdio_platform_data ath79_mdio1_data;
++extern struct platform_device ath79_mdio0_device;
++extern struct platform_device ath79_mdio1_device;
++void ath79_register_mdio(unsigned int id, u32 phy_mask);
++
++void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio);
++void ath79_setup_ar934x_eth_cfg(u32 mask);
++
++#endif /* _ATH79_DEV_ETH_H */
+diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+index cd41e93..3e6b2ed 100644
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -20,6 +20,10 @@
+ #include <linux/bitops.h>
+
+ #define AR71XX_APB_BASE 0x18000000
++#define AR71XX_GE0_BASE 0x19000000
++#define AR71XX_GE0_SIZE 0x10000
++#define AR71XX_GE1_BASE 0x1a000000
++#define AR71XX_GE1_SIZE 0x10000
+ #define AR71XX_EHCI_BASE 0x1b000000
+ #define AR71XX_EHCI_SIZE 0x1000
+ #define AR71XX_OHCI_BASE 0x1c000000
+@@ -39,6 +43,8 @@
+ #define AR71XX_PLL_SIZE 0x100
+ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE 0x100
++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE 0x100
+
+ #define AR71XX_PCI_MEM_BASE 0x10000000
+ #define AR71XX_PCI_MEM_SIZE 0x07000000
+@@ -81,11 +87,15 @@
+
+ #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE 0x14
++#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE 0x04
+ #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE 0x20000
+ #define AR933X_EHCI_BASE 0x1b000000
+ #define AR933X_EHCI_SIZE 0x1000
+
++#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE 0x14
+ #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE 0x20000
+ #define AR934X_EHCI_BASE 0x1b000000
+@@ -166,6 +176,9 @@
+ #define AR71XX_AHB_DIV_SHIFT 20
+ #define AR71XX_AHB_DIV_MASK 0x7
+
++#define AR71XX_ETH0_PLL_SHIFT 17
++#define AR71XX_ETH1_PLL_SHIFT 19
++
+ #define AR724X_PLL_REG_CPU_CONFIG 0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG 0x18
+
+@@ -178,6 +191,8 @@
+ #define AR724X_DDR_DIV_SHIFT 22
+ #define AR724X_DDR_DIV_MASK 0x3
+
++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG 0x00
+ #define AR913X_PLL_REG_ETH_CONFIG 0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
+@@ -190,6 +205,9 @@
+ #define AR913X_AHB_DIV_SHIFT 19
+ #define AR913X_AHB_DIV_MASK 0x1
+
++#define AR913X_ETH0_PLL_SHIFT 20
++#define AR913X_ETH1_PLL_SHIFT 22
++
+ #define AR933X_PLL_CPU_CONFIG_REG 0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG 0x08
+
+@@ -211,6 +229,8 @@
+ #define AR934X_PLL_CPU_CONFIG_REG 0x00
+ #define AR934X_PLL_DDR_CONFIG_REG 0x04
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
++#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
+
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
+@@ -243,9 +263,13 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG 0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG 0x04
+ #define QCA955X_PLL_CLK_CTRL_REG 0x08
++#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
+
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
+@@ -370,16 +394,30 @@
+ #define AR913X_RESET_USB_HOST BIT(5)
+ #define AR913X_RESET_USB_PHY BIT(4)
+
++#define AR933X_RESET_GE1_MDIO BIT(23)
++#define AR933X_RESET_GE0_MDIO BIT(22)
++#define AR933X_RESET_GE1_MAC BIT(13)
+ #define AR933X_RESET_WMAC BIT(11)
++#define AR933X_RESET_GE0_MAC BIT(9)
+ #define AR933X_RESET_USB_HOST BIT(5)
+ #define AR933X_RESET_USB_PHY BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+
++#define AR934X_RESET_GE1_MDIO BIT(23)
++#define AR934X_RESET_GE0_MDIO BIT(22)
++#define AR934X_RESET_GE1_MAC BIT(13)
+ #define AR934X_RESET_USB_PHY_ANALOG BIT(11)
++#define AR934X_RESET_GE0_MAC BIT(9)
++#define AR934X_RESET_ETH_SWITCH BIT(8)
+ #define AR934X_RESET_USB_HOST BIT(5)
+ #define AR934X_RESET_USB_PHY BIT(4)
+ #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
+
++#define QCA955X_RESET_GE1_MDIO BIT(23)
++#define QCA955X_RESET_GE0_MDIO BIT(22)
++#define QCA955X_RESET_GE1_MAC BIT(13)
++#define QCA955X_RESET_GE0_MAC BIT(9)
++
+ #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+
+ #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
+@@ -552,4 +590,47 @@
+ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
+ #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
+
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL 0x00
++#define AR71XX_MII_REG_MII1_CTRL 0x04
++
++#define AR71XX_MII_CTRL_IF_MASK 3
++#define AR71XX_MII_CTRL_SPEED_SHIFT 4
++#define AR71XX_MII_CTRL_SPEED_MASK 3
++#define AR71XX_MII_CTRL_SPEED_10 0
++#define AR71XX_MII_CTRL_SPEED_100 1
++#define AR71XX_MII_CTRL_SPEED_1000 2
++
++#define AR71XX_MII0_CTRL_IF_GMII 0
++#define AR71XX_MII0_CTRL_IF_MII 1
++#define AR71XX_MII0_CTRL_IF_RGMII 2
++#define AR71XX_MII0_CTRL_IF_RMII 3
++
++#define AR71XX_MII1_CTRL_IF_RGMII 0
++#define AR71XX_MII1_CTRL_IF_RMII 1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG 0x00
++
++#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG 0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
++#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0023-MIPS-ath79-add-Mikrotik-rb4xx-device-support.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0023-MIPS-ath79-add-Mikrotik-rb4xx-device-support.patch
new file mode 100644
index 000000000..67d390432
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0023-MIPS-ath79-add-Mikrotik-rb4xx-device-support.patch
@@ -0,0 +1,536 @@
+From 7f5193750c4fb525ab7bd0610d05631b1dfbd8bb Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Wed, 14 May 2014 03:10:28 +0200
+Subject: [PATCH] MIPS: ath79: add Mikrotik rb4xx device support
+
+---
+ arch/mips/ath79/Kconfig | 8 +
+ arch/mips/ath79/Makefile | 1 +
+ arch/mips/ath79/mach-rb4xx.c | 465 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ath79/machtypes.h | 9 +
+ 4 files changed, 483 insertions(+)
+ create mode 100644 arch/mips/ath79/mach-rb4xx.c
+
+diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
+index 52cefd7..7863079 100644
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -61,6 +61,14 @@ config ATH79_MACH_PB44
+ Say 'Y' here if you want your kernel to support the
+ Atheros PB44 reference board.
+
++config ATH79_MACH_RB4XX
++ bool "MikroTik RouterBOARD 4xx series support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++
+ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
+diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
+index 05485da..2b0e01b 100644
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -32,4 +32,5 @@ obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+ obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
++obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
+diff --git a/arch/mips/ath79/mach-rb4xx.c b/arch/mips/ath79/mach-rb4xx.c
+new file mode 100644
+index 0000000..1a61b45
+--- /dev/null
++++ b/arch/mips/ath79/mach-rb4xx.c
+@@ -0,0 +1,465 @@
++/*
++ * MikroTik RouterBOARD 4xx series support
++ *
++ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/mdio-gpio.h>
++#include <linux/mmc/host.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/mmc_spi.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/rb4xx_cpld.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define RB4XX_GPIO_USER_LED 4
++#define RB4XX_GPIO_RESET_SWITCH 7
++
++#define RB4XX_GPIO_CPLD_BASE 32
++#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
++#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
++#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
++#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
++#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
++
++#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
++#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
++
++static struct gpio_led rb4xx_leds_gpio[] __initdata = {
++ {
++ .name = "rb4xx:yellow:user",
++ .gpio = RB4XX_GPIO_USER_LED,
++ .active_low = 0,
++ }, {
++ .name = "rb4xx:green:led1",
++ .gpio = RB4XX_GPIO_CPLD_LED1,
++ .active_low = 1,
++ }, {
++ .name = "rb4xx:green:led2",
++ .gpio = RB4XX_GPIO_CPLD_LED2,
++ .active_low = 1,
++ }, {
++ .name = "rb4xx:green:led3",
++ .gpio = RB4XX_GPIO_CPLD_LED3,
++ .active_low = 1,
++ }, {
++ .name = "rb4xx:green:led4",
++ .gpio = RB4XX_GPIO_CPLD_LED4,
++ .active_low = 1,
++ }, {
++ .name = "rb4xx:green:led5",
++ .gpio = RB4XX_GPIO_CPLD_LED5,
++ .active_low = 0,
++ },
++};
++
++static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
++ {
++ .desc = "reset_switch",
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = RB4XX_GPIO_RESET_SWITCH,
++ .active_low = 1,
++ }
++};
++
++static struct platform_device rb4xx_nand_device = {
++ .name = "rb4xx-nand",
++ .id = -1,
++};
++
++static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
++ {
++ .slot = 17,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(2),
++ }, {
++ .slot = 18,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(0),
++ }, {
++ .slot = 18,
++ .pin = 2,
++ .irq = ATH79_PCI_IRQ(1),
++ }, {
++ .slot = 19,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(1),
++ }, {
++ .slot = 19,
++ .pin = 2,
++ .irq = ATH79_PCI_IRQ(2),
++ }, {
++ .slot = 20,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(2),
++ }, {
++ .slot = 20,
++ .pin = 2,
++ .irq = ATH79_PCI_IRQ(0),
++ }, {
++ .slot = 21,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(0),
++ }, {
++ .slot = 22,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(1),
++ }, {
++ .slot = 22,
++ .pin = 2,
++ .irq = ATH79_PCI_IRQ(2),
++ }, {
++ .slot = 23,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(2),
++ }, {
++ .slot = 23,
++ .pin = 2,
++ .irq = ATH79_PCI_IRQ(0),
++ }
++};
++
++static struct mtd_partition rb4xx_partitions[] = {
++ {
++ .name = "routerboot",
++ .offset = 0,
++ .size = 0x0b000,
++ .mask_flags = MTD_WRITEABLE,
++ }, {
++ .name = "hard_config",
++ .offset = 0x0b000,
++ .size = 0x01000,
++ .mask_flags = MTD_WRITEABLE,
++ }, {
++ .name = "bios",
++ .offset = 0x0d000,
++ .size = 0x02000,
++ .mask_flags = MTD_WRITEABLE,
++ }, {
++ .name = "soft_config",
++ .offset = 0x0f000,
++ .size = 0x01000,
++ }
++};
++
++static struct flash_platform_data rb4xx_flash_data = {
++ .type = "pm25lv512",
++ .parts = rb4xx_partitions,
++ .nr_parts = ARRAY_SIZE(rb4xx_partitions),
++};
++
++static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
++ .gpio_base = RB4XX_GPIO_CPLD_BASE,
++};
++
++static struct mmc_spi_platform_data rb4xx_mmc_data = {
++ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
++};
++
++static struct spi_board_info rb4xx_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &rb4xx_flash_data,
++ }, {
++ .bus_num = 0,
++ .chip_select = 1,
++ .max_speed_hz = 25000000,
++ .modalias = "spi-rb4xx-cpld",
++ .platform_data = &rb4xx_cpld_data,
++ }
++};
++
++static struct spi_board_info rb4xx_microsd_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 2,
++ .max_speed_hz = 25000000,
++ .modalias = "mmc_spi",
++ .platform_data = &rb4xx_mmc_data,
++ }
++};
++
++
++static struct resource rb4xx_spi_resources[] = {
++ {
++ .start = AR71XX_SPI_BASE,
++ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device rb4xx_spi_device = {
++ .name = "rb4xx-spi",
++ .id = -1,
++ .resource = rb4xx_spi_resources,
++ .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
++};
++
++static void __init rb4xx_generic_setup(void)
++{
++ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
++ AR71XX_GPIO_FUNC_SPI_CS2_EN);
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
++ rb4xx_leds_gpio);
++
++ ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(rb4xx_gpio_keys),
++ rb4xx_gpio_keys);
++
++ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
++ platform_device_register(&rb4xx_spi_device);
++ platform_device_register(&rb4xx_nand_device);
++}
++
++static void __init rb411_setup(void)
++{
++ rb4xx_generic_setup();
++ spi_register_board_info(rb4xx_microsd_info,
++ ARRAY_SIZE(rb4xx_microsd_info));
++
++ ath79_register_mdio(0, 0xfffffffc);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ath79_eth0_data.phy_mask = 0x00000003;
++
++ ath79_register_eth(0);
++
++ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++ ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
++ rb411_setup);
++
++static void __init rb411u_setup(void)
++{
++ rb411_setup();
++ ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
++ rb411u_setup);
++
++#define RB433_LAN_PHYMASK BIT(0)
++#define RB433_WAN_PHYMASK BIT(4)
++#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
++
++static void __init rb433_setup(void)
++{
++ rb4xx_generic_setup();
++ spi_register_board_info(rb4xx_microsd_info,
++ ARRAY_SIZE(rb4xx_microsd_info));
++
++ ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
++
++ ath79_register_eth(1);
++ ath79_register_eth(0);
++
++ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++ ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
++ rb433_setup);
++
++static void __init rb433u_setup(void)
++{
++ rb433_setup();
++ ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
++ rb433u_setup);
++
++static void __init rb435g_setup(void)
++{
++ rb4xx_generic_setup();
++
++ spi_register_board_info(rb4xx_microsd_info,
++ ARRAY_SIZE(rb4xx_microsd_info));
++
++ ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
++
++ ath79_register_eth(1);
++ ath79_register_eth(0);
++
++ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++ ath79_register_pci();
++
++ ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_435G, "435G", "MikroTik RouterBOARD 435G",
++ rb435g_setup);
++
++#define RB450_LAN_PHYMASK BIT(0)
++#define RB450_WAN_PHYMASK BIT(4)
++#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
++
++static void __init rb450_generic_setup(int gige)
++{
++ rb4xx_generic_setup();
++ ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
++ ath79_eth0_data.phy_if_mode = (gige) ?
++ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
++ ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth1_data.phy_if_mode = (gige) ?
++ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
++ ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
++
++ ath79_register_eth(1);
++ ath79_register_eth(0);
++}
++
++static void __init rb450_setup(void)
++{
++ rb450_generic_setup(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
++ rb450_setup);
++
++static void __init rb450g_setup(void)
++{
++ rb450_generic_setup(1);
++ spi_register_board_info(rb4xx_microsd_info,
++ ARRAY_SIZE(rb4xx_microsd_info));
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
++ rb450g_setup);
++
++static void __init rb493_setup(void)
++{
++ rb4xx_generic_setup();
++
++ ath79_register_mdio(0, 0x3fffff00);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ath79_eth0_data.speed = SPEED_100;
++ ath79_eth0_data.duplex = DUPLEX_FULL;
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ath79_eth1_data.phy_mask = 0x00000001;
++
++ ath79_register_eth(0);
++ ath79_register_eth(1);
++
++ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++ ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
++ rb493_setup);
++
++#define RB493G_GPIO_MDIO_MDC 7
++#define RB493G_GPIO_MDIO_DATA 8
++
++#define RB493G_MDIO_PHYMASK BIT(0)
++
++static struct mdio_gpio_platform_data rb493g_mdio_data = {
++ .mdc = RB493G_GPIO_MDIO_MDC,
++ .mdio = RB493G_GPIO_MDIO_DATA,
++
++ .phy_mask = ~RB493G_MDIO_PHYMASK,
++};
++
++static struct platform_device rb493g_mdio_device = {
++ .name = "mdio-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &rb493g_mdio_data,
++ },
++};
++
++static void __init rb493g_setup(void)
++{
++ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
++ AR71XX_GPIO_FUNC_SPI_CS2_EN);
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
++ rb4xx_leds_gpio);
++
++ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
++ spi_register_board_info(rb4xx_microsd_info,
++ ARRAY_SIZE(rb4xx_microsd_info));
++
++ platform_device_register(&rb4xx_spi_device);
++ platform_device_register(&rb4xx_nand_device);
++
++ ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
++ ath79_eth0_data.speed = SPEED_1000;
++ ath79_eth0_data.duplex = DUPLEX_FULL;
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
++ ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
++ ath79_eth1_data.speed = SPEED_1000;
++ ath79_eth1_data.duplex = DUPLEX_FULL;
++
++ platform_device_register(&rb493g_mdio_device);
++
++ ath79_register_eth(1);
++ ath79_register_eth(0);
++
++ ath79_register_usb();
++
++ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++ ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
++ rb493g_setup);
+diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
+index 2625405..7630954 100644
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -21,6 +21,15 @@ enum ath79_mach_type {
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
++ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
++ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
++ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
++ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */
++ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
++ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
++ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
++ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
+ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+ };
+
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0024-various-fixups-for-Werror.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0024-various-fixups-for-Werror.patch
new file mode 100644
index 000000000..57c1c1e06
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0024-various-fixups-for-Werror.patch
@@ -0,0 +1,66 @@
+From 45bdbeaf12f96a95bda6016a2aa943ae2dfceb96 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Fri, 16 May 2014 04:37:17 +0200
+Subject: [PATCH] various fixups for -Werror
+
+---
+ arch/mips/ath79/common.c | 4 ++--
+ arch/mips/ath79/dev-eth.c | 8 ++++----
+ drivers/net/phy/swconfig.c | 18 +-----------------
+ 3 files changed, 7 insertions(+), 23 deletions(-)
+
+diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c
+index eb3966c..def54c2 100644
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -59,7 +59,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_wb_flush);
+ void ath79_device_reset_set(u32 mask)
+ {
+ unsigned long flags;
+- u32 reg;
++ u32 reg = 0;
+ u32 t;
+
+ if (soc_is_ar71xx())
+@@ -87,7 +87,7 @@ EXPORT_SYMBOL_GPL(ath79_device_reset_set);
+ void ath79_device_reset_clear(u32 mask)
+ {
+ unsigned long flags;
+- u32 reg;
++ u32 reg = 0;
+ u32 t;
+
+ if (soc_is_ar71xx())
+diff --git a/arch/mips/ath79/dev-eth.c b/arch/mips/ath79/dev-eth.c
+index 21feeb9..879f1cd 100644
+--- a/arch/mips/ath79/dev-eth.c
++++ b/arch/mips/ath79/dev-eth.c
+@@ -121,7 +121,7 @@ static void __init ath79_mii_ctrl_set_if(unsigned int reg,
+ static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
+ {
+ void __iomem *base;
+- unsigned int mii_speed;
++ unsigned int mii_speed = 0;
+ u32 t;
+
+ switch (speed) {
+@@ -271,8 +271,8 @@ struct ath79_eth_pll_data ath79_eth1_pll_data;
+
+ static u32 ath79_get_eth_pll(unsigned int mac, int speed)
+ {
+- struct ath79_eth_pll_data *pll_data;
+- u32 pll_val;
++ struct ath79_eth_pll_data *pll_data = NULL;
++ u32 pll_val = 0;
+
+ switch (mac) {
+ case 0:
+@@ -511,7 +511,7 @@ struct ag71xx_switch_platform_data ath79_switch_data;
+ static void __init ath79_init_eth_pll_data(unsigned int id)
+ {
+ struct ath79_eth_pll_data *pll_data;
+- u32 pll_10, pll_100, pll_1000;
++ u32 pll_10 = 0, pll_100 = 0, pll_1000 = 0;
+
+ switch (id) {
+ case 0:
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0025-rb4xx_nand-add-partition-for-cfgfs.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0025-rb4xx_nand-add-partition-for-cfgfs.patch
new file mode 100644
index 000000000..7d9d85f62
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0025-rb4xx_nand-add-partition-for-cfgfs.patch
@@ -0,0 +1,28 @@
+From 8cbc2ee92ec6dbed4a806cedffc6919b6b90275b Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Tue, 3 Jun 2014 00:32:22 +0200
+Subject: [PATCH] rb4xx_nand: add partition for cfgfs
+
+---
+ drivers/mtd/nand/rb4xx_nand.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/drivers/mtd/nand/rb4xx_nand.c b/drivers/mtd/nand/rb4xx_nand.c
+index 5b9841b..603d001 100644
+--- a/drivers/mtd/nand/rb4xx_nand.c
++++ b/drivers/mtd/nand/rb4xx_nand.c
+@@ -65,6 +65,11 @@ static struct mtd_partition rb4xx_nand_partitions[] = {
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
++ .name = "cfgfs",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 0x400000,
++ },
++ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0027-ar71xx-add-zboot-support.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0027-ar71xx-add-zboot-support.patch
new file mode 100644
index 000000000..1963931a9
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0027-ar71xx-add-zboot-support.patch
@@ -0,0 +1,64 @@
+From 38af1d72bd5c760623996c7a8978e05e007f0e96 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Mon, 23 Jun 2014 02:51:10 +0200
+Subject: [PATCH] ar71xx: add zboot support
+
+This also contains a workaround for the decompressor overwriting the
+bootloader-passed kernel parameters in memory.
+---
+ arch/mips/Kconfig | 2 ++
+ arch/mips/boot/compressed/Makefile | 6 ++++++
+ arch/mips/boot/compressed/uart-16550.c | 6 ++++++
+ 3 files changed, 14 insertions(+)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 95fa1f1..3bb5324 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -106,6 +106,8 @@ config ATH79
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_ZBOOT
++ select SYS_SUPPORTS_ZBOOT_UART16550
+ help
+ Support for the Atheros AR71XX/AR724X/AR913X SoCs.
+
+diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
+index 61af6b6..5a4491d 100644
+--- a/arch/mips/boot/compressed/Makefile
++++ b/arch/mips/boot/compressed/Makefile
+@@ -13,7 +13,13 @@
+ #
+
+ # set the default size of the mallocing area for decompressing
++ifeq ($(CONFIG_ATH79_MACH_RB4XX),y)
++# this needs to be smaller, otherwise the routerboot passed
++# kernel parameters fall into bss area (and are therefore zeroed)
++BOOT_HEAP_SIZE := 0x100000
++else
+ BOOT_HEAP_SIZE := 0x400000
++endif
+
+ # Disable Function Tracer
+ KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
+diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
+index 237494b..25cb145 100644
+--- a/arch/mips/boot/compressed/uart-16550.c
++++ b/arch/mips/boot/compressed/uart-16550.c
+@@ -12,6 +12,12 @@
+ #define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
+ #endif
+
++#ifdef CONFIG_SOC_AR71XX
++#include <ar71xx_regs.h>
++#define PORT(offset) (CKSEG1ADDR(AR71XX_UART_BASE) + (4 * offset))
++#define IOTYPE unsigned int
++#endif
++
+ #ifdef CONFIG_AR7
+ #include <ar7.h>
+ #define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0028-ag71xx-workaround-some-link-state-bug.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0028-ag71xx-workaround-some-link-state-bug.patch
new file mode 100644
index 000000000..4dbac11ee
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0028-ag71xx-workaround-some-link-state-bug.patch
@@ -0,0 +1,39 @@
+From 02dc26588275d19a49d47abf2210c41b071cd796 Mon Sep 17 00:00:00 2001
+From: Phil Sutter <phil@nwl.cc>
+Date: Sat, 28 Jun 2014 17:07:52 +0200
+Subject: [PATCH] ag71xx: workaround some link state bug
+
+This happens when routing 100mbit/s traffic with masquerading, link
+supposedly drops to 10HD for a few seconds leading to the driver
+reinitialising the NIC and therefore causing a throughput drop. Ignoring
+those link changes allows for constant bandwidth, therefore this seems
+not to be a real problem of the hardware but one of an overreacting
+driver.
+---
+ drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+index 9de77e9..a83707e 100644
+--- a/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
++++ b/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+@@ -25,7 +25,15 @@ static void ag71xx_phy_link_adjust(struct net_device *dev)
+ if (phydev->link) {
+ if (ag->duplex != phydev->duplex
+ || ag->speed != phydev->speed) {
+- status_change = 1;
++ /* Completely ignore speed/duplex changes as long
++ * as the link stays up as they're probably spurious
++ * (the internal link should not change any way).
++ *
++ * This is actually a workaround, as the link seems to
++ * drop to 10HD from 1000FD under routing load when at
++ * least masquerading is also in use.
++ */
++ //status_change = 1;
+ }
+ }
+
+--
+1.8.5.3
+
diff --git a/target/mips/mikrotik-rb4xx/patches/4.1.6/0029-gpio-add-gpio-latch-driver.patch b/target/mips/mikrotik-rb4xx/patches/4.1.6/0029-gpio-add-gpio-latch-driver.patch
new file mode 100644
index 000000000..ade756fa9
--- /dev/null
+++ b/target/mips/mikrotik-rb4xx/patches/4.1.6/0029-gpio-add-gpio-latch-driver.patch
@@ -0,0 +1,1261 @@
+diff -Nur linux-4.1.6.orig/drivers/gpio/gpio-latch.c linux-4.1.6/drivers/gpio/gpio-latch.c
+--- linux-4.1.6.orig/drivers/gpio/gpio-latch.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/gpio/gpio-latch.c 2015-09-16 00:47:41.982063655 +0200
+@@ -0,0 +1,220 @@
++/*
++ * GPIO latch driver
++ *
++ * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/platform_data/gpio-latch.h>
++
++struct gpio_latch_chip {
++ struct gpio_chip gc;
++
++ struct mutex mutex;
++ struct mutex latch_mutex;
++ bool latch_enabled;
++ int le_gpio;
++ bool le_active_low;
++ int *gpios;
++};
++
++static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc)
++{
++ return container_of(gc, struct gpio_latch_chip, gc);
++}
++
++static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable)
++{
++ mutex_lock(&glc->mutex);
++
++ if (enable)
++ glc->latch_enabled = true;
++
++ if (glc->latch_enabled)
++ mutex_lock(&glc->latch_mutex);
++}
++
++static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable)
++{
++ if (glc->latch_enabled)
++ mutex_unlock(&glc->latch_mutex);
++
++ if (disable)
++ glc->latch_enabled = true;
++
++ mutex_unlock(&glc->mutex);
++}
++
++static int
++gpio_latch_get(struct gpio_chip *gc, unsigned offset)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ int ret;
++
++ gpio_latch_lock(glc, false);
++ ret = gpio_get_value(glc->gpios[offset]);
++ gpio_latch_unlock(glc, false);
++
++ return ret;
++}
++
++static void
++gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ bool enable_latch = false;
++ bool disable_latch = false;
++ int gpio;
++
++ gpio = glc->gpios[offset];
++
++ if (gpio == glc->le_gpio) {
++ enable_latch = value ^ glc->le_active_low;
++ disable_latch = !enable_latch;
++ }
++
++ gpio_latch_lock(glc, enable_latch);
++ gpio_set_value(gpio, value);
++ gpio_latch_unlock(glc, disable_latch);
++}
++
++static int
++gpio_latch_direction_input(struct gpio_chip *gc, unsigned offset)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ int ret;
++
++ gpio_latch_lock(glc, false);
++ ret = gpio_direction_input(glc->gpios[offset]);
++ gpio_latch_unlock(glc, false);
++
++ return ret;
++}
++
++static int
++gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value)
++{
++ struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++ bool enable_latch = false;
++ bool disable_latch = false;
++ int gpio;
++ int ret;
++
++ gpio = glc->gpios[offset];
++
++ if (gpio == glc->le_gpio) {
++ enable_latch = value ^ glc->le_active_low;
++ disable_latch = !enable_latch;
++ }
++
++ gpio_latch_lock(glc, enable_latch);
++ ret = gpio_direction_output(gpio, value);
++ gpio_latch_unlock(glc, disable_latch);
++
++ return ret;
++}
++
++static int gpio_latch_probe(struct platform_device *pdev)
++{
++ struct gpio_latch_chip *glc;
++ struct gpio_latch_platform_data *pdata;
++ struct gpio_chip *gc;
++ int size;
++ int ret;
++ int i;
++
++ pdata = dev_get_platdata(&pdev->dev);
++ if (!pdata)
++ return -EINVAL;
++
++ if (pdata->le_gpio_index >= pdata->num_gpios ||
++ !pdata->num_gpios ||
++ !pdata->gpios)
++ return -EINVAL;
++
++ for (i = 0; i < pdata->num_gpios; i++) {
++ int gpio = pdata->gpios[i];
++
++ ret = devm_gpio_request(&pdev->dev, gpio,
++ GPIO_LATCH_DRIVER_NAME);
++ if (ret)
++ return ret;
++ }
++
++ glc = devm_kzalloc(&pdev->dev, sizeof(*glc), GFP_KERNEL);
++ if (!glc)
++ return -ENOMEM;
++
++ mutex_init(&glc->mutex);
++ mutex_init(&glc->latch_mutex);
++
++ size = pdata->num_gpios * sizeof(glc->gpios[0]);
++ glc->gpios = devm_kzalloc(&pdev->dev, size , GFP_KERNEL);
++ if (!glc->gpios)
++ return -ENOMEM;
++
++ memcpy(glc->gpios, pdata->gpios, size);
++
++ glc->le_gpio = glc->gpios[pdata->le_gpio_index];
++ glc->le_active_low = pdata->le_active_low;
++
++ gc = &glc->gc;
++
++ gc->label = GPIO_LATCH_DRIVER_NAME;
++ gc->base = pdata->base;
++ gc->can_sleep = true;
++ gc->ngpio = pdata->num_gpios;
++ gc->get = gpio_latch_get;
++ gc->set = gpio_latch_set;
++ gc->direction_input = gpio_latch_direction_input,
++ gc->direction_output = gpio_latch_direction_output;
++
++ platform_set_drvdata(pdev, glc);
++
++ ret = gpiochip_add(&glc->gc);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static int gpio_latch_remove(struct platform_device *pdev)
++{
++ struct gpio_latch_chip *glc = platform_get_drvdata(pdev);
++
++ gpiochip_remove(&glc->gc);
++ return 0;
++}
++
++
++static struct platform_driver gpio_latch_driver = {
++ .probe = gpio_latch_probe,
++ .remove = gpio_latch_remove,
++ .driver = {
++ .name = GPIO_LATCH_DRIVER_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init gpio_latch_init(void)
++{
++ return platform_driver_register(&gpio_latch_driver);
++}
++
++postcore_initcall(gpio_latch_init);
++
++MODULE_DESCRIPTION("GPIO latch driver");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME);
+diff -Nur linux-4.1.6.orig/drivers/gpio/Kconfig linux-4.1.6/drivers/gpio/Kconfig
+--- linux-4.1.6.orig/drivers/gpio/Kconfig 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/gpio/Kconfig 2015-09-16 00:47:15.279630571 +0200
+@@ -988,4 +988,9 @@
+
+ endmenu
+
++config GPIO_LATCH
++ tristate "GPIO latch driver"
++ help
++ Say yes here to enable a GPIO latch driver.
++
+ endif
+diff -Nur linux-4.1.6.orig/drivers/gpio/Kconfig.orig linux-4.1.6/drivers/gpio/Kconfig.orig
+--- linux-4.1.6.orig/drivers/gpio/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/drivers/gpio/Kconfig.orig 2015-08-17 05:52:51.000000000 +0200
+@@ -0,0 +1,991 @@
++#
++# GPIO infrastructure and drivers
++#
++
++config ARCH_HAVE_CUSTOM_GPIO_H
++ bool
++ help
++ Selecting this config option from the architecture Kconfig allows
++ the architecture to provide a custom asm/gpio.h implementation
++ overriding the default implementations. New uses of this are
++ strongly discouraged.
++
++config ARCH_WANT_OPTIONAL_GPIOLIB
++ bool
++ help
++ Select this config option from the architecture Kconfig, if
++ it is possible to use gpiolib on the architecture, but let the
++ user decide whether to actually build it or not.
++ Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
++ not depend on GPIOs being available, but rather let the user
++ decide whether he needs it or not.
++
++config ARCH_REQUIRE_GPIOLIB
++ bool
++ select GPIOLIB
++ help
++ Platforms select gpiolib if they use this infrastructure
++ for all their GPIOs, usually starting with ones integrated
++ into SOC processors.
++ Selecting this from the architecture code will cause the gpiolib
++ code to always get built in.
++
++
++menuconfig GPIOLIB
++ bool "GPIO Support"
++ depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
++ help
++ This enables GPIO support through the generic GPIO library.
++ You only need to enable this, if you also want to enable
++ one or more of the GPIO drivers below.
++
++ If unsure, say N.
++
++if GPIOLIB
++
++config GPIO_DEVRES
++ def_bool y
++ depends on HAS_IOMEM
++
++config OF_GPIO
++ def_bool y
++ depends on OF
++
++config GPIO_ACPI
++ def_bool y
++ depends on ACPI
++
++config GPIOLIB_IRQCHIP
++ select IRQ_DOMAIN
++ bool
++
++config DEBUG_GPIO
++ bool "Debug GPIO calls"
++ depends on DEBUG_KERNEL
++ help
++ Say Y here to add some extra checks and diagnostics to GPIO calls.
++ These checks help ensure that GPIOs have been properly initialized
++ before they are used, and that sleeping calls are not made from
++ non-sleeping contexts. They can make bitbanged serial protocols
++ slower. The diagnostics help catch the type of setup errors
++ that are most common when setting up new platforms or boards.
++
++config GPIO_SYSFS
++ bool "/sys/class/gpio/... (sysfs interface)"
++ depends on SYSFS
++ help
++ Say Y here to add a sysfs interface for GPIOs.
++
++ This is mostly useful to work around omissions in a system's
++ kernel support. Those are common in custom and semicustom
++ hardware assembled using standard kernels with a minimum of
++ custom patches. In those cases, userspace code may import
++ a given GPIO from the kernel, if no kernel driver requested it.
++
++ Kernel drivers may also request that a particular GPIO be
++ exported to userspace; this can be useful when debugging.
++
++config GPIO_GENERIC
++ tristate
++
++# put drivers in the right section, in alphabetical order
++
++# This symbol is selected by both I2C and SPI expanders
++config GPIO_MAX730X
++ tristate
++
++menu "Memory mapped GPIO drivers"
++
++config GPIO_74XX_MMIO
++ tristate "GPIO driver for 74xx-ICs with MMIO access"
++ depends on OF_GPIO
++ select GPIO_GENERIC
++ help
++ Say yes here to support GPIO functionality for 74xx-compatible ICs
++ with MMIO access. Compatible models include:
++ 1 bit: 741G125 (Input), 741G74 (Output)
++ 2 bits: 742G125 (Input), 7474 (Output)
++ 4 bits: 74125 (Input), 74175 (Output)
++ 6 bits: 74365 (Input), 74174 (Output)
++ 8 bits: 74244 (Input), 74273 (Output)
++ 16 bits: 741624 (Input), 7416374 (Output)
++
++config GPIO_ALTERA
++ tristate "Altera GPIO"
++ depends on OF_GPIO
++ select GPIO_GENERIC
++ select GPIOLIB_IRQCHIP
++ help
++ Say Y or M here to build support for the Altera PIO device.
++
++ If driver is built as a module it will be called gpio-altera.
++
++config GPIO_BCM_KONA
++ bool "Broadcom Kona GPIO"
++ depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
++ help
++ Turn on GPIO support for Broadcom "Kona" chips.
++
++config GPIO_CLPS711X
++ tristate "CLPS711X GPIO support"
++ depends on ARCH_CLPS711X || COMPILE_TEST
++ select GPIO_GENERIC
++ help
++ Say yes here to support GPIO on CLPS711X SoCs.
++
++config GPIO_DAVINCI
++ bool "TI Davinci/Keystone GPIO support"
++ default y if ARCH_DAVINCI
++ depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
++ help
++ Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.
++
++config GPIO_DWAPB
++ tristate "Synopsys DesignWare APB GPIO driver"
++ select GPIO_GENERIC
++ select GENERIC_IRQ_CHIP
++ help
++ Say Y or M here to build support for the Synopsys DesignWare APB
++ GPIO block.
++
++config GPIO_EM
++ tristate "Emma Mobile GPIO"
++ depends on ARM && OF_GPIO
++ help
++ Say yes here to support GPIO on Renesas Emma Mobile SoCs.
++
++config GPIO_EP93XX
++ def_bool y
++ depends on ARCH_EP93XX
++ select GPIO_GENERIC
++
++config GPIO_F7188X
++ tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
++ depends on X86
++ help
++ This option enables support for GPIOs found on Fintek Super-I/O
++ chips F71869, F71869A, F71882FG and F71889F.
++
++ To compile this driver as a module, choose M here: the module will
++ be called f7188x-gpio.
++
++config GPIO_GE_FPGA
++ bool "GE FPGA based GPIO"
++ depends on GE_FPGA
++ select GPIO_GENERIC
++ help
++ Support for common GPIO functionality provided on some GE Single Board
++ Computers.
++
++ This driver provides basic support (configure as input or output, read
++ and write pin state) for GPIO implemented in a number of GE single
++ board computers.
++
++config GPIO_GENERIC_PLATFORM
++ tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
++ select GPIO_GENERIC
++ help
++ Say yes here to support basic platform_device memory-mapped GPIO controllers.
++
++config GPIO_GRGPIO
++ tristate "Aeroflex Gaisler GRGPIO support"
++ depends on OF
++ select GPIO_GENERIC
++ select IRQ_DOMAIN
++ help
++ Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
++ VHDL IP core library.
++
++config GPIO_ICH
++ tristate "Intel ICH GPIO"
++ depends on PCI && X86
++ select MFD_CORE
++ select LPC_ICH
++ help
++ Say yes here to support the GPIO functionality of a number of Intel
++ ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
++ ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
++ Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).
++
++ If unsure, say N.
++
++config GPIO_IOP
++ tristate "Intel IOP GPIO"
++ depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
++ help
++ Say yes here to support the GPIO functionality of a number of Intel
++ IOP32X or IOP33X.
++
++ If unsure, say N.
++
++config GPIO_IT8761E
++ tristate "IT8761E GPIO support"
++ depends on X86 # unconditional access to IO space.
++ help
++ Say yes here to support GPIO functionality of IT8761E super I/O chip.
++
++config GPIO_LOONGSON
++ bool "Loongson-2/3 GPIO support"
++ depends on CPU_LOONGSON2 || CPU_LOONGSON3
++ help
++ driver for GPIO functionality on Loongson-2F/3A/3B processors.
++
++config GPIO_LYNXPOINT
++ tristate "Intel Lynxpoint GPIO support"
++ depends on ACPI && X86
++ select GPIOLIB_IRQCHIP
++ help
++ driver for GPIO functionality on Intel Lynxpoint PCH chipset
++ Requires ACPI device enumeration code to set up a platform device.
++
++config GPIO_MB86S7X
++ bool "GPIO support for Fujitsu MB86S7x Platforms"
++ depends on ARCH_MB86S7X
++ help
++ Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
++
++config GPIO_MM_LANTIQ
++ bool "Lantiq Memory mapped GPIOs"
++ depends on LANTIQ && SOC_XWAY
++ help
++ This enables support for memory mapped GPIOs on the External Bus Unit
++ (EBU) found on Lantiq SoCs. The gpios are output only as they are
++ created by attaching a 16bit latch to the bus.
++
++config GPIO_MOXART
++ bool "MOXART GPIO support"
++ depends on ARCH_MOXART
++ select GPIO_GENERIC
++ help
++ Select this option to enable GPIO driver for
++ MOXA ART SoC devices.
++
++config GPIO_MPC5200
++ def_bool y
++ depends on PPC_MPC52xx
++
++config GPIO_MPC8XXX
++ bool "MPC512x/MPC8xxx GPIO support"
++ depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
++ FSL_SOC_BOOKE || PPC_86xx
++ help
++ Say Y here if you're going to use hardware that connects to the
++ MPC512x/831x/834x/837x/8572/8610 GPIOs.
++
++config GPIO_MSM_V2
++ tristate "Qualcomm MSM GPIO v2"
++ depends on GPIOLIB && OF && ARCH_QCOM
++ help
++ Say yes here to support the GPIO interface on ARM v7 based
++ Qualcomm MSM chips. Most of the pins on the MSM can be
++ selected for GPIO, and are controlled by this driver.
++
++config GPIO_MVEBU
++ def_bool y
++ depends on PLAT_ORION
++ depends on OF
++ select GPIO_GENERIC
++ select GENERIC_IRQ_CHIP
++
++config GPIO_MXC
++ def_bool y
++ depends on ARCH_MXC
++ select GPIO_GENERIC
++ select GENERIC_IRQ_CHIP
++
++config GPIO_MXS
++ def_bool y
++ depends on ARCH_MXS
++ select GPIO_GENERIC
++ select GENERIC_IRQ_CHIP
++
++config GPIO_OCTEON
++ tristate "Cavium OCTEON GPIO"
++ depends on GPIOLIB && CAVIUM_OCTEON_SOC
++ default y
++ help
++ Say yes here to support the on-chip GPIO lines on the OCTEON
++ family of SOCs.
++
++config GPIO_OMAP
++ bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS
++ default y if ARCH_OMAP
++ depends on ARM
++ select GENERIC_IRQ_CHIP
++ select GPIOLIB_IRQCHIP
++ help
++ Say yes here to enable GPIO support for TI OMAP SoCs.
++
++config GPIO_PL061
++ bool "PrimeCell PL061 GPIO support"
++ depends on ARM_AMBA
++ select IRQ_DOMAIN
++ select GPIOLIB_IRQCHIP
++ help
++ Say yes here to support the PrimeCell PL061 GPIO device
++
++config GPIO_PXA
++ bool "PXA GPIO support"
++ depends on ARCH_PXA || ARCH_MMP
++ help
++ Say yes here to support the PXA GPIO device
++
++config GPIO_RCAR
++ tristate "Renesas R-Car GPIO"
++ depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
++ select GPIOLIB_IRQCHIP
++ help
++ Say yes here to support GPIO on Renesas R-Car SoCs.
++
++config GPIO_SAMSUNG
++ bool
++ depends on PLAT_SAMSUNG
++ help
++ Legacy GPIO support. Use only for platforms without support for
++ pinctrl.
++
++config GPIO_SCH
++ tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
++ depends on PCI && X86
++ select MFD_CORE
++ select LPC_SCH
++ help
++ Say yes here to support GPIO interface on Intel Poulsbo SCH,
++ Intel Tunnel Creek processor, Intel Centerton processor or
++ Intel Quark X1000 SoC.
++
++ The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
++ powered by the core power rail and are turned off during sleep
++ modes (S3 and higher). The remaining four GPIOs are powered by
++ the Intel SCH suspend power supply. These GPIOs remain
++ active during S3. The suspend powered GPIOs can be used to wake the
++ system from the Suspend-to-RAM state.
++
++ The Intel Tunnel Creek processor has 5 GPIOs powered by the
++ core power rail and 9 from suspend power supply.
++
++ The Intel Centerton processor has a total of 30 GPIO pins.
++ Twenty-one are powered by the core power rail and 9 from the
++ suspend power supply.
++
++ The Intel Quark X1000 SoC has 2 GPIOs powered by the core
++ power well and 6 from the suspend power well.
++
++config GPIO_SCH311X
++ tristate "SMSC SCH311x SuperI/O GPIO"
++ help
++ Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
++ SCH3116 "Super I/O" chipsets.
++
++ To compile this driver as a module, choose M here: the module will
++ be called gpio-sch311x.
++
++config GPIO_SPEAR_SPICS
++ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
++ depends on PLAT_SPEAR
++ select GENERIC_IRQ_CHIP
++ help
++ Say yes here to support ST SPEAr SPI Chip Select as GPIO device
++
++config GPIO_STA2X11
++ bool "STA2x11/ConneXt GPIO support"
++ depends on MFD_STA2X11
++ select GENERIC_IRQ_CHIP
++ help
++ Say yes here to support the STA2x11/ConneXt GPIO device.
++ The GPIO module has 128 GPIO pins with alternate functions.
++
++config GPIO_STP_XWAY
++ bool "XWAY STP GPIOs"
++ depends on SOC_XWAY
++ help
++ This enables support for the Serial To Parallel (STP) unit found on
++ XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
++ that can be up to 24 bit. This peripheral is aimed at driving leds.
++ Some of the gpios/leds can be auto updated by the soc with dsl and
++ phy status.
++
++config GPIO_SYSCON
++ tristate "GPIO based on SYSCON"
++ depends on MFD_SYSCON && OF
++ help
++ Say yes here to support GPIO functionality though SYSCON driver.
++
++config GPIO_TB10X
++ bool
++ select GENERIC_IRQ_CHIP
++ select OF_GPIO
++
++config GPIO_TS5500
++ tristate "TS-5500 DIO blocks and compatibles"
++ depends on TS5500 || COMPILE_TEST
++ help
++ This driver supports Digital I/O exposed by pin blocks found on some
++ Technologic Systems platforms. It includes, but is not limited to, 3
++ blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
++ LCD port.
++
++config GPIO_TZ1090
++ bool "Toumaz Xenif TZ1090 GPIO support"
++ depends on SOC_TZ1090
++ select GENERIC_IRQ_CHIP
++ default y
++ help
++ Say yes here to support Toumaz Xenif TZ1090 GPIOs.
++
++config GPIO_TZ1090_PDC
++ bool "Toumaz Xenif TZ1090 PDC GPIO support"
++ depends on SOC_TZ1090
++ default y
++ help
++ Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.
++
++config GPIO_VF610
++ def_bool y
++ depends on ARCH_MXC && SOC_VF610
++ select GPIOLIB_IRQCHIP
++ help
++ Say yes here to support Vybrid vf610 GPIOs.
++
++config GPIO_VR41XX
++ tristate "NEC VR4100 series General-purpose I/O Uint support"
++ depends on CPU_VR41XX
++ help
++ Say yes here to support the NEC VR4100 series General-purpose I/O Uint
++
++config GPIO_VX855
++ tristate "VIA VX855/VX875 GPIO"
++ depends on PCI
++ select MFD_CORE
++ select MFD_VX855
++ help
++ Support access to the VX855/VX875 GPIO lines through the gpio library.
++
++ This driver provides common support for accessing the device,
++ additional drivers must be enabled in order to use the
++ functionality of the device.
++
++config GPIO_XGENE
++ bool "APM X-Gene GPIO controller support"
++ depends on ARM64 && OF_GPIO
++ help
++ This driver is to support the GPIO block within the APM X-Gene SoC
++ platform's generic flash controller. The GPIO pins are muxed with
++ the generic flash controller's address and data pins. Say yes
++ here to enable the GFC GPIO functionality.
++
++config GPIO_XGENE_SB
++ tristate "APM X-Gene GPIO standby controller support"
++ depends on ARCH_XGENE && OF_GPIO
++ select GPIO_GENERIC
++ help
++ This driver supports the GPIO block within the APM X-Gene
++ Standby Domain. Say yes here to enable the GPIO functionality.
++
++config GPIO_XILINX
++ tristate "Xilinx GPIO support"
++ depends on OF_GPIO && (PPC || MICROBLAZE || ARCH_ZYNQ || X86)
++ help
++ Say yes here to support the Xilinx FPGA GPIO device
++
++config GPIO_XTENSA
++ bool "Xtensa GPIO32 support"
++ depends on XTENSA
++ depends on HAVE_XTENSA_GPIO32
++ depends on !SMP
++ help
++ Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
++ and EXPSTATE (output) ports
++
++config GPIO_ZEVIO
++ bool "LSI ZEVIO SoC memory mapped GPIOs"
++ depends on ARM && OF_GPIO
++ help
++ Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
++
++config GPIO_ZYNQ
++ tristate "Xilinx Zynq GPIO support"
++ depends on ARCH_ZYNQ
++ select GPIOLIB_IRQCHIP
++ help
++ Say yes here to support Xilinx Zynq GPIO controller.
++
++endmenu
++
++menu "I2C GPIO expanders"
++ depends on I2C
++
++config GPIO_ADP5588
++ tristate "ADP5588 I2C GPIO expander"
++ depends on I2C
++ help
++ This option enables support for 18 GPIOs found
++ on Analog Devices ADP5588 GPIO Expanders.
++
++config GPIO_ADP5588_IRQ
++ bool "Interrupt controller support for ADP5588"
++ depends on GPIO_ADP5588=y
++ help
++ Say yes here to enable the adp5588 to be used as an interrupt
++ controller. It requires the driver to be built in the kernel.
++
++config GPIO_ADNP
++ tristate "Avionic Design N-bit GPIO expander"
++ depends on I2C && OF_GPIO
++ select GPIOLIB_IRQCHIP
++ help
++ This option enables support for N GPIOs found on Avionic Design
++ I2C GPIO expanders. The register space will be extended by powers
++ of two, so the controller will need to accommodate for that. For
++ example: if a controller provides 48 pins, 6 registers will be
++ enough to represent all pins, but the driver will assume a
++ register layout for 64 pins (8 registers).
++
++config GPIO_MAX7300
++ tristate "Maxim MAX7300 GPIO expander"
++ depends on I2C
++ select GPIO_MAX730X
++ help
++ GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
++
++config GPIO_MAX732X
++ tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
++ depends on I2C
++ help
++ Say yes here to support the MAX7319, MAX7320-7327 series of I2C
++ Port Expanders. Each IO port on these chips has a fixed role of
++ Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
++ Input and Output (designed by 'P'). The combinations are listed
++ below:
++
++ 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
++ max7322 (4I4O), max7323 (4P4O)
++
++ 16 bits: max7324 (8I8O), max7325 (8P8O),
++ max7326 (4I12O), max7327 (4P12O)
++
++ Board setup code must specify the model to use, and the start
++ number for these GPIOs.
++
++config GPIO_MAX732X_IRQ
++ bool "Interrupt controller support for MAX732x"
++ depends on GPIO_MAX732X=y
++ select GPIOLIB_IRQCHIP
++ help
++ Say yes here to enable the max732x to be used as an interrupt
++ controller. It requires the driver to be built in the kernel.
++
++config GPIO_MC9S08DZ60
++ bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
++ depends on I2C=y && MACH_MX35_3DS
++ help
++ Select this to enable the MC9S08DZ60 GPIO driver
++
++config GPIO_PCA953X
++ tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
++ depends on I2C
++ help
++ Say yes here to provide access to several register-oriented
++ SMBus I/O expanders, made mostly by NXP or TI. Compatible
++ models include:
++
++ 4 bits: pca9536, pca9537
++
++ 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
++ pca9556, pca9557, pca9574, tca6408, xra1202
++
++ 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
++ tca6416
++
++ 24 bits: tca6424
++
++ 40 bits: pca9505, pca9698
++
++config GPIO_PCA953X_IRQ
++ bool "Interrupt controller support for PCA953x"
++ depends on GPIO_PCA953X=y
++ select GPIOLIB_IRQCHIP
++ help
++ Say yes here to enable the pca953x to be used as an interrupt
++ controller. It requires the driver to be built in the kernel.
++
++config GPIO_PCF857X
++ tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
++ depends on I2C
++ select GPIOLIB_IRQCHIP
++ select IRQ_DOMAIN
++ help
++ Say yes here to provide access to most "quasi-bidirectional" I2C
++ GPIO expanders used for additional digital outputs or inputs.
++ Most of these parts are from NXP, though TI is a second source for
++ some of them. Compatible models include:
++
++ 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
++ pca9670, pca9672, pca9674, pca9674a,
++ max7328, max7329
++
++ 16 bits: pcf8575, pcf8575c, pca8575,
++ pca9671, pca9673, pca9675
++
++ Your board setup code will need to declare the expanders in
++ use, and assign numbers to the GPIOs they expose. Those GPIOs
++ can then be used from drivers and other kernel code, just like
++ other GPIOs, but only accessible from task contexts.
++
++ This driver provides an in-kernel interface to those GPIOs using
++ platform-neutral GPIO calls.
++
++config GPIO_SX150X
++ bool "Semtech SX150x I2C GPIO expander"
++ depends on I2C=y
++ select GPIOLIB_IRQCHIP
++ default n
++ help
++ Say yes here to provide support for Semtech SX150-series I2C
++ GPIO expanders. Compatible models include:
++
++ 8 bits: sx1508q
++ 16 bits: sx1509q
++
++endmenu
++
++menu "MFD GPIO expanders"
++
++config GPIO_ADP5520
++ tristate "GPIO Support for ADP5520 PMIC"
++ depends on PMIC_ADP5520
++ help
++ This option enables support for on-chip GPIO found
++ on Analog Devices ADP5520 PMICs.
++
++config GPIO_ARIZONA
++ tristate "Wolfson Microelectronics Arizona class devices"
++ depends on MFD_ARIZONA
++ help
++ Support for GPIOs on Wolfson Arizona class devices.
++
++config GPIO_CRYSTAL_COVE
++ tristate "GPIO support for Crystal Cove PMIC"
++ depends on INTEL_SOC_PMIC
++ select GPIOLIB_IRQCHIP
++ help
++ Support for GPIO pins on Crystal Cove PMIC.
++
++ Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
++ inside.
++
++ This driver can also be built as a module. If so, the module will be
++ called gpio-crystalcove.
++
++config GPIO_CS5535
++ tristate "AMD CS5535/CS5536 GPIO support"
++ depends on MFD_CS5535
++ help
++ The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
++ can be used for quite a number of things. The CS5535/6 is found on
++ AMD Geode and Lemote Yeeloong devices.
++
++ If unsure, say N.
++
++config GPIO_DA9052
++ tristate "Dialog DA9052 GPIO"
++ depends on PMIC_DA9052
++ help
++ Say yes here to enable the GPIO driver for the DA9052 chip.
++
++config GPIO_DA9055
++ tristate "Dialog Semiconductor DA9055 GPIO"
++ depends on MFD_DA9055
++ help
++ Say yes here to enable the GPIO driver for the DA9055 chip.
++
++ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
++ be controller by this driver.
++
++ If driver is built as a module it will be called gpio-da9055.
++
++config GPIO_DLN2
++ tristate "Diolan DLN2 GPIO support"
++ depends on MFD_DLN2
++ select GPIOLIB_IRQCHIP
++
++ help
++ Select this option to enable GPIO driver for the Diolan DLN2
++ board.
++
++ This driver can also be built as a module. If so, the module
++ will be called gpio-dln2.
++
++config GPIO_JANZ_TTL
++ tristate "Janz VMOD-TTL Digital IO Module"
++ depends on MFD_JANZ_CMODIO
++ help
++ This enables support for the Janz VMOD-TTL Digital IO module.
++ This driver provides support for driving the pins in output
++ mode only. Input mode is not supported.
++
++config GPIO_KEMPLD
++ tristate "Kontron ETX / COMexpress GPIO"
++ depends on MFD_KEMPLD
++ help
++ This enables support for the PLD GPIO interface on some Kontron ETX
++ and COMexpress (ETXexpress) modules.
++
++ This driver can also be built as a module. If so, the module will be
++ called gpio-kempld.
++
++config GPIO_LP3943
++ tristate "TI/National Semiconductor LP3943 GPIO expander"
++ depends on MFD_LP3943
++ help
++ GPIO driver for LP3943 MFD.
++ LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
++ Open drain outputs are required for this usage.
++
++config GPIO_MSIC
++ bool "Intel MSIC mixed signal gpio support"
++ depends on MFD_INTEL_MSIC
++ help
++ Enable support for GPIO on intel MSIC controllers found in
++ intel MID devices
++
++config GPIO_PALMAS
++ bool "TI PALMAS series PMICs GPIO"
++ depends on MFD_PALMAS
++ help
++ Select this option to enable GPIO driver for the TI PALMAS
++ series chip family.
++
++config GPIO_RC5T583
++ bool "RICOH RC5T583 GPIO"
++ depends on MFD_RC5T583
++ help
++ Select this option to enable GPIO driver for the Ricoh RC5T583
++ chip family.
++ This driver provides the support for driving/reading the gpio pins
++ of RC5T583 device through standard gpio library.
++
++config GPIO_STMPE
++ bool "STMPE GPIOs"
++ depends on MFD_STMPE
++ depends on OF_GPIO
++ select GPIOLIB_IRQCHIP
++ help
++ This enables support for the GPIOs found on the STMPE I/O
++ Expanders.
++
++config GPIO_TC3589X
++ bool "TC3589X GPIOs"
++ depends on MFD_TC3589X
++ depends on OF_GPIO
++ select GPIOLIB_IRQCHIP
++ help
++ This enables support for the GPIOs found on the TC3589X
++ I/O Expander.
++
++config GPIO_TIMBERDALE
++ bool "Support for timberdale GPIO IP"
++ depends on MFD_TIMBERDALE
++ ---help---
++ Add support for the GPIO IP in the timberdale FPGA.
++
++config GPIO_TPS6586X
++ bool "TPS6586X GPIO"
++ depends on MFD_TPS6586X
++ help
++ Select this option to enable GPIO driver for the TPS6586X
++ chip family.
++
++config GPIO_TPS65910
++ bool "TPS65910 GPIO"
++ depends on MFD_TPS65910
++ help
++ Select this option to enable GPIO driver for the TPS65910
++ chip family.
++
++config GPIO_TPS65912
++ tristate "TI TPS65912 GPIO"
++ depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
++ help
++ This driver supports TPS65912 gpio chip
++
++config GPIO_TWL4030
++ tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
++ depends on TWL4030_CORE
++ help
++ Say yes here to access the GPIO signals of various multi-function
++ power management chips from Texas Instruments.
++
++config GPIO_TWL6040
++ tristate "TWL6040 GPO"
++ depends on TWL6040_CORE
++ help
++ Say yes here to access the GPO signals of twl6040
++ audio chip from Texas Instruments.
++
++config GPIO_UCB1400
++ tristate "Philips UCB1400 GPIO"
++ depends on UCB1400_CORE
++ help
++ This enables support for the Philips UCB1400 GPIO pins.
++ The UCB1400 is an AC97 audio codec.
++
++config GPIO_WM831X
++ tristate "WM831x GPIOs"
++ depends on MFD_WM831X
++ help
++ Say yes here to access the GPIO signals of WM831x power management
++ chips from Wolfson Microelectronics.
++
++config GPIO_WM8350
++ tristate "WM8350 GPIOs"
++ depends on MFD_WM8350
++ help
++ Say yes here to access the GPIO signals of WM8350 power management
++ chips from Wolfson Microelectronics.
++
++config GPIO_WM8994
++ tristate "WM8994 GPIOs"
++ depends on MFD_WM8994
++ help
++ Say yes here to access the GPIO signals of WM8994 audio hub
++ CODECs from Wolfson Microelectronics.
++
++endmenu
++
++menu "PCI GPIO expanders"
++ depends on PCI
++
++config GPIO_AMD8111
++ tristate "AMD 8111 GPIO driver"
++ depends on PCI
++ help
++ The AMD 8111 south bridge contains 32 GPIO pins which can be used.
++
++ Note, that usually system firmware/ACPI handles GPIO pins on their
++ own and users might easily break their systems with uncarefull usage
++ of this driver!
++
++ If unsure, say N
++
++config GPIO_BT8XX
++ tristate "BT8XX GPIO abuser"
++ depends on PCI && VIDEO_BT848=n
++ help
++ The BT8xx frame grabber chip has 24 GPIO pins that can be abused
++ as a cheap PCI GPIO card.
++
++ This chip can be found on Miro, Hauppauge and STB TV-cards.
++
++ The card needs to be physically altered for using it as a
++ GPIO card. For more information on how to build a GPIO card
++ from a BT8xx TV card, see the documentation file at
++ Documentation/bt8xxgpio.txt
++
++ If unsure, say N.
++
++config GPIO_INTEL_MID
++ bool "Intel Mid GPIO support"
++ depends on PCI && X86
++ select GPIOLIB_IRQCHIP
++ help
++ Say Y here to support Intel Mid GPIO.
++
++config GPIO_ML_IOH
++ tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
++ depends on PCI
++ select GENERIC_IRQ_CHIP
++ help
++ ML7213 is companion chip for Intel Atom E6xx series.
++ This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
++ Hub) which is for IVI(In-Vehicle Infotainment) use.
++ This driver can access the IOH's GPIO device.
++
++config GPIO_PCH
++ tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
++ depends on PCI && (X86_32 || COMPILE_TEST)
++ select GENERIC_IRQ_CHIP
++ help
++ This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
++ which is an IOH(Input/Output Hub) for x86 embedded processor.
++ This driver can access PCH GPIO device.
++
++ This driver also can be used for LAPIS Semiconductor IOH(Input/
++ Output Hub), ML7223 and ML7831.
++ ML7223 IOH is for MP(Media Phone) use.
++ ML7831 IOH is for general purpose use.
++ ML7223/ML7831 is companion chip for Intel Atom E6xx series.
++ ML7223/ML7831 is completely compatible for Intel EG20T PCH.
++
++config GPIO_RDC321X
++ tristate "RDC R-321x GPIO support"
++ depends on PCI
++ select MFD_CORE
++ select MFD_RDC321X
++ help
++ Support for the RDC R321x SoC GPIOs over southbridge
++ PCI configuration space.
++
++config GPIO_SODAVILLE
++ bool "Intel Sodaville GPIO support"
++ depends on X86 && PCI && OF
++ select GPIO_GENERIC
++ select GENERIC_IRQ_CHIP
++ help
++ Say Y here to support Intel Sodaville GPIO.
++
++endmenu
++
++menu "SPI GPIO expanders"
++ depends on SPI_MASTER
++
++config GPIO_74X164
++ tristate "74x164 serial-in/parallel-out 8-bits shift register"
++ depends on SPI_MASTER && OF
++ help
++ Driver for 74x164 compatible serial-in/parallel-out 8-outputs
++ shift registers. This driver can be used to provide access
++ to more gpio outputs.
++
++config GPIO_MAX7301
++ tristate "Maxim MAX7301 GPIO expander"
++ depends on SPI_MASTER
++ select GPIO_MAX730X
++ help
++ GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
++
++config GPIO_MCP23S08
++ tristate "Microchip MCP23xxx I/O expander"
++ depends on (SPI_MASTER && !I2C) || I2C
++ help
++ SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
++ I/O expanders.
++ This provides a GPIO interface supporting inputs and outputs.
++ The I2C versions of the chips can be used as interrupt-controller.
++
++config GPIO_MC33880
++ tristate "Freescale MC33880 high-side/low-side switch"
++ depends on SPI_MASTER
++ help
++ SPI driver for Freescale MC33880 high-side/low-side switch.
++ This provides GPIO interface supporting inputs and outputs.
++
++endmenu
++
++menu "USB GPIO expanders"
++ depends on USB
++
++config GPIO_VIPERBOARD
++ tristate "Viperboard GPIO a & b support"
++ depends on MFD_VIPERBOARD && USB
++ help
++ Say yes here to access the GPIO signals of Nano River
++ Technologies Viperboard. There are two GPIO chips on the
++ board: gpioa and gpiob.
++ See viperboard API specification and Nano
++ River Tech's viperboard.h for detailed meaning
++ of the module parameters.
++
++endmenu
++
++endif
+diff -Nur linux-4.1.6.orig/drivers/gpio/Makefile linux-4.1.6/drivers/gpio/Makefile
+--- linux-4.1.6.orig/drivers/gpio/Makefile 2015-08-17 05:52:51.000000000 +0200
++++ linux-4.1.6/drivers/gpio/Makefile 2015-09-16 00:47:15.279630571 +0200
+@@ -42,6 +42,7 @@
+ obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
+ obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
+ obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
++obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
+ obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
+ obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
+ obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
+diff -Nur linux-4.1.6.orig/include/linux/platform_data/gpio-latch.h linux-4.1.6/include/linux/platform_data/gpio-latch.h
+--- linux-4.1.6.orig/include/linux/platform_data/gpio-latch.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.6/include/linux/platform_data/gpio-latch.h 2015-09-16 00:48:10.204407551 +0200
+@@ -0,0 +1,14 @@
++#ifndef _GPIO_LATCH_H_
++#define _GPIO_LATCH_H_
++
++#define GPIO_LATCH_DRIVER_NAME "gpio-latch"
++
++struct gpio_latch_platform_data {
++ int base;
++ int num_gpios;
++ int *gpios;
++ int le_gpio_index;
++ bool le_active_low;
++};
++
++#endif /* _GPIO_LATCH_H_ */
diff --git a/target/mips/systems/mikrotik-rb4xx b/target/mips/systems/mikrotik-rb4xx
index 57e853eb1..785a57705 100644
--- a/target/mips/systems/mikrotik-rb4xx
+++ b/target/mips/systems/mikrotik-rb4xx
@@ -5,12 +5,12 @@ config ADK_TARGET_SYSTEM_MIKROTIK_RB4XX
select ADK_TARGET_WITH_MINIPCI
select ADK_TARGET_WITH_SERIAL
select ADK_TARGET_WITH_PCI
+ select ADK_TARGET_WITH_SPI
select ADK_TARGET_WITH_WATCHDOG
select ADK_TARGET_WITH_NAND
select ADK_TARGET_WITH_LEDS
select ADK_TARGET_WITH_NET
select ADK_TARGET_WITH_BLOCK
- select ADK_TARGET_KERNEL_VMLINUZ
help
Support for Mikrotik RB411/RB433/RB493g.