diff options
Diffstat (limited to 'target/tools')
50 files changed, 0 insertions, 5514 deletions
diff --git a/target/tools/addpattern/Makefile b/target/tools/addpattern/Makefile deleted file mode 100644 index 596daeb52..000000000 --- a/target/tools/addpattern/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: addpattern.c - $(CC_FOR_BUILD) $(FLAGS_FOR_BUILD) -o ${STAGING_HOST_DIR}/bin/addpattern addpattern.c diff --git a/target/tools/addpattern/addpattern.c b/target/tools/addpattern/addpattern.c deleted file mode 100644 index 8133bf26e..000000000 --- a/target/tools/addpattern/addpattern.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* July 29, 2004 - * - * This is a hacked replacement for the 'addpattern' utility used to - * create wrt54g .bin firmware files. It isn't pretty, but it does - * the job for me. - * - * Extensions: - * -v allows setting the version string on the command line. - * -{0|1} sets the (currently ignored) hw_ver flag in the header - * to 0 or 1 respectively. - */ - -/* January 12, 2005 - * - * Modified by rodent at rodent dot za dot net - * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags" - * Without the flags set to 0x7, the above units will refuse to flash. - * - * Extensions: - * -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1 - * and adds the new hardware "flags" for the v2.2/v1.1 units -*/ - -/* January 1, 2007 - * - * Modified by juan.i.gonzalez at subdown dot net - * Support added for the AG241v2 and similar - * - * Extensions: - * -r #.# adds revision hardware flags. AG241v2 and similar. - * - * AG241V2 firmware sets the hw_ver to 0x44. - * - * Example: -r 2.0 - * - * Convert 2.0 to 20 to be an integer, and add 0x30 to skip special ASCII - * #define HW_Version ((HW_REV * 10) + 0x30) -> from cyutils.h -*/ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <time.h> -#include <unistd.h> -#include <sys/stat.h> - -/**********************************************************************/ - -#define CODE_ID "U2ND" /* from code_pattern.h */ -#define CODE_PATTERN "W54S" /* from code_pattern.h */ -#define PBOT_PATTERN "PBOT" - -#define CYBERTAN_VERSION "v3.37.2" /* from cyutils.h */ - -/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */ -#define SUPPORT_4712_CHIP 0x0001 -#define SUPPORT_INTEL_FLASH 0x0002 -#define SUPPORT_5325E_SWITCH 0x0004 - -struct code_header { /* from cyutils.h */ - char magic[4]; - char res1[4]; /* for extra magic */ - char fwdate[3]; - char fwvern[3]; - char id[4]; /* U2ND */ - char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */ - char unused; - unsigned char flags[2]; /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */ - unsigned char res2[10]; -} ; - -/**********************************************************************/ - -void usage(void) __attribute__ (( __noreturn__ )); - -void usage(void) -{ - fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-b] [-v v#.#.#] [-r #.#] [-{0|1|2|4}] -h\n"); - exit(EXIT_FAILURE); -} - -int main(int argc, char **argv) -{ - char buf[1024]; /* keep this at 1k or adjust garbage calc below */ - struct code_header *hdr; - FILE *in = stdin; - FILE *out = stdout; - char *ifn = NULL; - char *ofn = NULL; - char *pattern = CODE_PATTERN; - char *pbotpat = PBOT_PATTERN; - char *version = CYBERTAN_VERSION; - int gflag = 0; - int pbotflag = 0; - int c; - int v0, v1, v2; - size_t off, n; - time_t t; - struct tm *ptm; - - hdr = (struct code_header *) buf; - memset(hdr, 0, sizeof(struct code_header)); - - while ((c = getopt(argc, argv, "i:o:p:gbv:0124hr:")) != -1) { - switch (c) { - case 'i': - ifn = optarg; - break; - case 'o': - ofn = optarg; - break; - case 'p': - pattern = optarg; - break; - case 'g': - gflag = 1; - break; - case 'b': - pbotflag = 1; - break; - case 'v': /* extension to allow setting version */ - version = optarg; - break; - case '0': - hdr->hw_ver = 0; - break; - case '1': - hdr->hw_ver = 1; - break; - case '2': /* new 54G v2.2 and 54GS v1.1 flags */ - hdr->hw_ver = 1; - hdr->flags[0] |= SUPPORT_4712_CHIP; - hdr->flags[0] |= SUPPORT_INTEL_FLASH; - hdr->flags[0] |= SUPPORT_5325E_SWITCH; - break; - case '4': - /* V4 firmware sets the flags to 0x1f */ - hdr->hw_ver = 0; - hdr->flags[0] = 0x1f; - break; - case 'r': - hdr->hw_ver = (char)(atof(optarg)*10)+0x30; - break; - - case 'h': - default: - usage(); - } - } - - if (optind != argc || optind == 1) { - fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]); - usage(); - } - - if (strlen(pattern) != 4) { - fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern); - usage(); - } - - if (ifn && !(in = fopen(ifn, "r"))) { - fprintf(stderr, "can not open \"%s\" for reading\n", ifn); - usage(); - } - - if (ofn && !(out = fopen(ofn, "w"))) { - fprintf(stderr, "can not open \"%s\" for writing\n", ofn); - usage(); - } - - if (time(&t) == (time_t)(-1)) { - fprintf(stderr, "time call failed\n"); - return EXIT_FAILURE; - } - - ptm = localtime(&t); - - if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) { - fprintf(stderr, "bad version string \"%s\"\n", version); - return EXIT_FAILURE; - } - - memcpy(&hdr->magic, pattern, 4); - if (pbotflag) - memcpy(&hdr->res1, pbotpat, 4); - hdr->fwdate[0] = ptm->tm_year % 100; - hdr->fwdate[1] = ptm->tm_mon + 1; - hdr->fwdate[2] = ptm->tm_mday; - hdr->fwvern[0] = v0; - hdr->fwvern[1] = v1; - hdr->fwvern[2] = v2; - memcpy(&hdr->id, CODE_ID, strlen(CODE_ID)); - - off = sizeof(struct code_header); - - fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n", - v0, v1, v2, - hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]); - - - while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) { - off = 0; - if (n < sizeof(buf)) { - if (ferror(in)) { - FREAD_ERROR: - fprintf(stderr, "fread error\n"); - return EXIT_FAILURE; - } - if (gflag) { - gflag = sizeof(buf) - n; - memset(buf + n, 0xff, gflag); - n = sizeof(buf); - } - } - if (!fwrite(buf, n, 1, out)) { - FWRITE_ERROR: - fprintf(stderr, "fwrite error\n"); - return EXIT_FAILURE; - } - } - - if (ferror(in)) { - goto FREAD_ERROR; - } - - if (fflush(out)) { - goto FWRITE_ERROR; - } - - fclose(in); - fclose(out); - - return EXIT_SUCCESS; -} diff --git a/target/tools/lzma-loader/.svn/entries b/target/tools/lzma-loader/.svn/entries deleted file mode 100644 index 2934ab892..000000000 --- a/target/tools/lzma-loader/.svn/entries +++ /dev/null @@ -1,300 +0,0 @@ -10 - -dir -29646 -svn://svn.openwrt.org/openwrt/trunk/target/linux/brcm47xx/image/lzma-loader/src -svn://svn.openwrt.org/openwrt - - - -2010-12-02T21:27:54.805904Z -24217 -hauke - - - - - - - - - - - - - - -3c298f89-4303-0410-b956-a3cf2f4a3e73 - -head.S -file - - - - -2011-11-10T10:12:04.000000Z -566bfb5f462e85d45d1d0c4faca0dadd -2010-06-26T20:41:49.877730Z -21945 -nbd - - - - - - - - - - - - - - - - - - - - - -3585 - -decompress.c -file - - - - -2011-11-10T10:12:04.000000Z -b9ae9d76bf7f1f35ce46b5e496a02aa1 -2010-12-02T21:27:54.805904Z -24217 -hauke - - - - - - - - - - - - - - - - - - - - - -5426 - -LzmaDecode.c -file - - - - -2011-11-10T10:12:04.000000Z -14403972ddbcfadbe017a6aeb3e8fae1 -2010-06-26T20:41:49.877730Z -21945 -nbd - - - - - - - - - - - - - - - - - - - - - -17104 - -decompress.lds.in -file - - - - -2011-11-10T10:12:04.000000Z -c80cc6ad34b26e0af3c1d764218a3a61 -2010-06-26T20:41:49.877730Z -21945 -nbd - - - - - - - - - - - - - - - - - - - - - -186 - -loader.lds.in -file - - - - -2011-11-10T10:12:04.000000Z -f06b23d31242fb56a60b864b741c1266 -2010-06-26T20:41:49.877730Z -21945 -nbd - - - - - - - - - - - - - - - - - - - - - -151 - -LzmaDecode.h -file - - - - -2011-11-10T10:12:04.000000Z -12fcb710de789e54587079c021ae5e33 -2010-06-26T20:41:49.877730Z -21945 -nbd - - - - - - - - - - - - - - - - - - - - - -2465 - -Makefile -file - - - - -2011-11-10T10:12:04.000000Z -61400e27cb7c0099046d83e2146e0053 -2010-06-26T20:41:49.877730Z -21945 -nbd - - - - - - - - - - - - - - - - - - - - - -2325 - -README -file - - - - -2011-11-10T10:12:04.000000Z -b29e81088cc18e92dede243f094c4134 -2010-06-26T20:41:49.877730Z -21945 -nbd - - - - - - - - - - - - - - - - - - - - - -2464 - diff --git a/target/tools/lzma-loader/.svn/text-base/LzmaDecode.c.svn-base b/target/tools/lzma-loader/.svn/text-base/LzmaDecode.c.svn-base deleted file mode 100644 index 951700bdd..000000000 --- a/target/tools/lzma-loader/.svn/text-base/LzmaDecode.c.svn-base +++ /dev/null @@ -1,663 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -typedef struct _CRangeDecoder -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback; - int Result; - #endif - int ExtraBytes; -} CRangeDecoder; - -Byte RangeDecoderReadByte(CRangeDecoder *rd) -{ - if (rd->Buffer == rd->BufferLim) - { - #ifdef _LZMA_IN_CB - UInt32 size; - rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); - rd->BufferLim = rd->Buffer + size; - if (size == 0) - #endif - { - rd->ExtraBytes = 1; - return 0xFF; - } - } - return (*rd->Buffer++); -} - -/* #define ReadByte (*rd->Buffer++) */ -#define ReadByte (RangeDecoderReadByte(rd)) - -void RangeDecoderInit(CRangeDecoder *rd, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - Byte *stream, UInt32 bufferSize - #endif - ) -{ - int i; - #ifdef _LZMA_IN_CB - rd->InCallback = inCallback; - rd->Buffer = rd->BufferLim = 0; - #else - rd->Buffer = stream; - rd->BufferLim = stream + bufferSize; - #endif - rd->ExtraBytes = 0; - rd->Code = 0; - rd->Range = (0xFFFFFFFF); - for(i = 0; i < 5; i++) - rd->Code = (rd->Code << 8) | ReadByte; -} - -#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; -#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; -#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } - -UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) -{ - RC_INIT_VAR - UInt32 result = 0; - int i; - for (i = numTotalBits; i > 0; i--) - { - /* UInt32 t; */ - range >>= 1; - - result <<= 1; - if (code >= range) - { - code -= range; - result |= 1; - } - /* - t = (code - range) >> 31; - t &= 1; - code -= range & (t - 1); - result = (result + result) | (1 - t); - */ - RC_NORMALIZE - } - RC_FLUSH_VAR - return result; -} - -int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) -{ - UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; - if (rd->Code < bound) - { - rd->Range = bound; - *prob += (kBitModelTotal - *prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 0; - } - else - { - rd->Range -= bound; - rd->Code -= bound; - *prob -= (*prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 1; - } -} - -#define RC_GET_BIT2(prob, mi, A0, A1) \ - UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ - if (code < bound) \ - { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ - else \ - { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ - RC_NORMALIZE - -#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) - -int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = numLevels; i > 0; i--) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT(prob, mi) - #else - mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return mi - (1 << numLevels); -} - -int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - int symbol = 0; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = 0; i < numLevels; i++) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) - #else - int bit = RangeDecoderBitDecode(probs + mi, rd); - mi = mi + mi + bit; - symbol |= (bit << i); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - int bit; - int matchBit = (matchByte >> 7) & 1; - matchByte <<= 1; - #ifdef _LZMA_LOC_OPT - { - CProb *prob = probs + ((1 + matchBit) << 8) + symbol; - RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) - } - #else - bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); - symbol = (symbol << 1) | bit; - #endif - if (matchBit != bit) - { - while (symbol < 0x100) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - break; - } - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - -int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) -{ - if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) - return RangeDecoderBitTreeDecode(p + LenLow + - (posState << kLenNumLowBits), kLenNumLowBits, rd); - if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) - return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + - (posState << kLenNumMidBits), kLenNumMidBits, rd); - return kLenNumLowSymbols + kLenNumMidSymbols + - RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); -} - -#define kNumStates 12 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#ifdef _LZMA_OUT_READ - -typedef struct _LzmaVarState -{ - CRangeDecoder RangeDecoder; - Byte *Dictionary; - UInt32 DictionarySize; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 Reps[4]; - int lc; - int lp; - int pb; - int State; - int PreviousIsMatch; - int RemainLen; -} LzmaVarState; - -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif - ) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - UInt32 i; - if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - vs->Dictionary = dictionary; - vs->DictionarySize = dictionarySize; - vs->DictionaryPos = 0; - vs->GlobalPos = 0; - vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; - vs->lc = lc; - vs->lp = lp; - vs->pb = pb; - vs->State = 0; - vs->PreviousIsMatch = 0; - vs->RemainLen = 0; - dictionary[dictionarySize - 1] = 0; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&vs->RangeDecoder, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); - return LZMA_RESULT_OK; -} - -int LzmaDecode(unsigned char *buffer, - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - CRangeDecoder rd = vs->RangeDecoder; - int state = vs->State; - int previousIsMatch = vs->PreviousIsMatch; - Byte previousByte; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << (vs->pb)) - 1; - UInt32 literalPosMask = (1 << (vs->lp)) - 1; - int lc = vs->lc; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - if (len == -1) - { - *outSizeProcessed = 0; - return LZMA_RESULT_OK; - } - - while(len > 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; -#else - -int LzmaDecode( - Byte *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - CProb *p = (CProb *)buffer; - CRangeDecoder rd; - UInt32 i; - int state = 0; - int previousIsMatch = 0; - Byte previousByte = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << pb) - 1; - UInt32 literalPosMask = (1 << lp) - 1; - int len = 0; - if (bufferSize < numProbs * sizeof(CProb)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&rd, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); -#endif - - *outSizeProcessed = 0; - while(nowPos < outSize) - { - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - #ifdef _LZMA_IN_CB - if (rd.Result != LZMA_RESULT_OK) - return rd.Result; - #endif - if (rd.ExtraBytes != 0) - return LZMA_RESULT_DATA_ERROR; - if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - CProb *probs = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - if (previousIsMatch) - { - Byte matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); - previousIsMatch = 0; - } - else - previousByte = LzmaLiteralDecode(probs, &rd); - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - } - else - { - previousIsMatch = 1; - if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) - { - if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) - { - if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - if ( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - == 0) - return LZMA_RESULT_DATA_ERROR; - state = state < 7 ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - continue; - } - } - else - { - UInt32 distance; - if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) - distance = rep1; - else - { - if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) - distance = rep2; - else - { - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - len = LzmaLenDecode(p + RepLenCoder, &rd, posState); - state = state < 7 ? 8 : 11; - } - else - { - int posSlot; - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < 7 ? 7 : 10; - len = LzmaLenDecode(p + LenCoder, &rd, posState); - posSlot = RangeDecoderBitTreeDecode(p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits), kNumPosSlotBits, &rd); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); - if (posSlot < kEndPosModelIndex) - { - rep0 += RangeDecoderReverseBitTreeDecode( - p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); - } - else - { - rep0 += RangeDecoderDecodeDirectBits(&rd, - numDirectBits - kNumAlignBits) << kNumAlignBits; - rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); - } - } - else - rep0 = posSlot; - rep0++; - } - if (rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = -1; - break; - } - if (rep0 > nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - { - return LZMA_RESULT_DATA_ERROR; - } - len += kMatchMinLen; - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - len--; - } - while(len > 0 && nowPos < outSize); - } - } - - #ifdef _LZMA_OUT_READ - vs->RangeDecoder = rd; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + nowPos; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->PreviousIsMatch = previousIsMatch; - vs->RemainLen = len; - #endif - - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/tools/lzma-loader/.svn/text-base/LzmaDecode.h.svn-base b/target/tools/lzma-loader/.svn/text-base/LzmaDecode.h.svn-base deleted file mode 100644 index f58944e3c..000000000 --- a/target/tools/lzma-loader/.svn/text-base/LzmaDecode.h.svn-base +++ /dev/null @@ -1,100 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 -#define LZMA_RESULT_NOT_ENOUGH_MEM 2 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -/* -bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -bufferSize += 100 in case of _LZMA_OUT_READ -by default CProb is unsigned short, -but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -*/ - -#ifdef _LZMA_OUT_READ -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif -); -#endif - -int LzmaDecode( - unsigned char *buffer, - #ifndef _LZMA_OUT_READ - UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#endif diff --git a/target/tools/lzma-loader/.svn/text-base/Makefile.svn-base b/target/tools/lzma-loader/.svn/text-base/Makefile.svn-base deleted file mode 100644 index 3320e565d..000000000 --- a/target/tools/lzma-loader/.svn/text-base/Makefile.svn-base +++ /dev/null @@ -1,77 +0,0 @@ -# -# Makefile for Broadcom BCM947XX boards -# -# Copyright 2001-2003, Broadcom Corporation -# All Rights Reserved. -# -# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -# -# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org> -# Modified to support bzip'd kernels. -# Of course, it would be better to integrate bunzip capability into CFE. -# -# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su> -# Cleaned up, modified for lzma support, removed from kernel -# - -TEXT_START := 0x80001000 -BZ_TEXT_START := 0x80400000 - -OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -ffunction-sections -pipe -mlong-calls -fno-common \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) - -SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/ - -OBJECTS := head.o data.o - -all: loader.gz loader.elf - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -loader.gz: loader - gzip -nc9 $< > $@ - -loader.elf: loader.o - cp $< $@ - -loader: loader.o - $(OBJCOPY) $< $@ - -loader.o: loader.lds $(OBJECTS) - $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS) - -loader.lds: loader.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ - -data.o: data.lds decompress.image - $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips - -data.lds: - @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ - -decompress.image: decompress - $(OBJCOPY) $< $@ - -decompress: decompress.lds decompress.o LzmaDecode.o - $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o - -decompress.lds: decompress.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ - -mrproper: clean - -clean: - rm -f loader.gz loader decompress *.lds *.o *.image diff --git a/target/tools/lzma-loader/.svn/text-base/README.svn-base b/target/tools/lzma-loader/.svn/text-base/README.svn-base deleted file mode 100644 index 16649e950..000000000 --- a/target/tools/lzma-loader/.svn/text-base/README.svn-base +++ /dev/null @@ -1,55 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -The code is intended to decompress kernel, being compressed using lzma utility -build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory - -decompressor code expects that your .trx file consist of three partitions: - -1) decompressor itself (this is gziped code which pmon/cfe will extract and run -on boot-up instead of real kernel) -2) LZMA compressed kernel (both streamed and regular modes are supported now) -3) Root filesystem - -Please be sure to apply the following patch for use this new trx layout (it will -allow using both new and old trx files for root filesystem lookup code) - ---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 -+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 -@@ -221,7 +221,9 @@ - /* Try looking at TRX header for rootfs offset */ - if (le32_to_cpu(trx->magic) == TRX_MAGIC) { - bcm947xx_parts[1].offset = off; -- if (le32_to_cpu(trx->offsets[1]) > off) -+ if (le32_to_cpu(trx->offsets[2]) > off) -+ off = le32_to_cpu(trx->offsets[2]); -+ else if (le32_to_cpu(trx->offsets[1]) > off) - off = le32_to_cpu(trx->offsets[1]); - continue; - } - - -Revision history: - 0.02 Initial release - 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual - output size to decoder (stream mode compressed input is not - a requirement anymore) - 0.04 Reordered functions using lds script diff --git a/target/tools/lzma-loader/.svn/text-base/decompress.c.svn-base b/target/tools/lzma-loader/.svn/text-base/decompress.c.svn-base deleted file mode 100644 index 05681b152..000000000 --- a/target/tools/lzma-loader/.svn/text-base/decompress.c.svn-base +++ /dev/null @@ -1,186 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Please note, this was code based on the bunzip2 decompressor code - * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left - * is an idea and part of original vendor code - * - * - * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com> - * pass actual output size to decoder (stream mode - * compressed input is not a requirement anymore) - * - * 24-Apr-2005 Oleg I. Vdovikin - * reordered functions using lds script, removed forward decl - * - */ - -#include "LzmaDecode.h" - -#define BCM4710_FLASH 0x1fc00000 /* Flash */ - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -#define cache_unroll(base,op) \ - __asm__ __volatile__( \ - ".set noreorder;\n" \ - ".set mips3;\n" \ - "cache %1, (%0);\n" \ - ".set mips0;\n" \ - ".set reorder\n" \ - : \ - : "r" (base), \ - "i" (op)); - -static __inline__ void blast_icache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += lsize; - } -} - -static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += lsize; - } -} - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ - -struct trx_header { - unsigned int magic; /* "HDR0" */ - unsigned int len; /* Length of file including header */ - unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ - unsigned int flag_version; /* 0:15 flags, 16:31 version */ - unsigned int offsets[3]; /* Offsets of partitions from start of header */ -}; - -#define EDIMAX_PS_HEADER_MAGIC 0x36315350 /* "PS16" */ -#define EDIMAX_PS_HEADER_LEN 0xc /* 12 bytes long for edimax header */ - -/* beyound the image end, size not known in advance */ -extern unsigned char workspace[]; - -unsigned int offset; -unsigned char *data; - -/* flash access should be aligned, so wrapper is used */ -/* read byte from the flash, all accesses are 32-bit aligned */ -static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) -{ - static unsigned int val; - - if (((unsigned int)offset % 4) == 0) { - val = *(unsigned int *)data; - data += 4; - } - - *bufferSize = 1; - *buffer = ((unsigned char *)&val) + (offset++ & 3); - - return LZMA_RESULT_OK; -} - -static __inline__ unsigned char get_byte(void) -{ - unsigned char *buffer; - UInt32 fake; - - return read_byte(0, &buffer, &fake), *buffer; -} - -/* should be the first function */ -void entry(unsigned long icache_size, unsigned long icache_lsize, - unsigned long dcache_size, unsigned long dcache_lsize, - unsigned long fw_arg0, unsigned long fw_arg1, - unsigned long fw_arg2, unsigned long fw_arg3) -{ - unsigned int i; /* temp value */ - unsigned int lc; /* literal context bits */ - unsigned int lp; /* literal pos state bits */ - unsigned int pb; /* pos state bits */ - unsigned int osize; /* uncompressed size */ - - ILzmaInCallback callback; - callback.Read = read_byte; - - /* look for trx header, 32-bit data access */ - for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH)); - ((struct trx_header *)data)->magic != TRX_MAGIC && - ((struct trx_header *)data)->magic != EDIMAX_PS_HEADER_MAGIC; - data += 65536); - - if (((struct trx_header *)data)->magic == EDIMAX_PS_HEADER_MAGIC) - data += EDIMAX_PS_HEADER_LEN; - /* compressed kernel is in the partition 0 or 1 */ - if (((struct trx_header *)data)->offsets[1] > 65536) - data += ((struct trx_header *)data)->offsets[0]; - else - data += ((struct trx_header *)data)->offsets[1]; - - offset = 0; - - /* lzma args */ - i = get_byte(); - lc = i % 9, i = i / 9; - lp = i % 5, pb = i / 5; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - /* decompress kernel */ - if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback, - (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK) - { - blast_dcache(dcache_size, dcache_lsize); - blast_icache(icache_size, icache_lsize); - - /* Jump to load address */ - ((void (*)(unsigned long, unsigned long, unsigned long, - unsigned long)) LOADADDR)(fw_arg0, fw_arg1, fw_arg2, - fw_arg3); - } -} diff --git a/target/tools/lzma-loader/.svn/text-base/decompress.lds.in.svn-base b/target/tools/lzma-loader/.svn/text-base/decompress.lds.in.svn-base deleted file mode 100644 index 33f56f8a0..000000000 --- a/target/tools/lzma-loader/.svn/text-base/decompress.lds.in.svn-base +++ /dev/null @@ -1,20 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(entry) -SECTIONS { - . = BZ_TEXT_START; - .text : { - *(.text.entry) - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } - - workspace = .; -} diff --git a/target/tools/lzma-loader/.svn/text-base/head.S.svn-base b/target/tools/lzma-loader/.svn/text-base/head.S.svn-base deleted file mode 100644 index 3a33e4016..000000000 --- a/target/tools/lzma-loader/.svn/text-base/head.S.svn-base +++ /dev/null @@ -1,160 +0,0 @@ -/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ -/* cache manipulation adapted from Broadcom code */ -/* idea taken from original bunzip2 decompressor code */ -/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ -/* Licensed under the linux kernel's version of the GPL.*/ - -#include <asm/asm.h> -#include <asm/regdef.h> - -#define KSEG0 0x80000000 - -#define C0_CONFIG $16 -#define C0_TAGLO $28 -#define C0_TAGHI $29 - -#define CONF1_DA_SHIFT 7 /* D$ associativity */ -#define CONF1_DA_MASK 0x00000380 -#define CONF1_DA_BASE 1 -#define CONF1_DL_SHIFT 10 /* D$ line size */ -#define CONF1_DL_MASK 0x00001c00 -#define CONF1_DL_BASE 2 -#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -#define CONF1_DS_MASK 0x0000e000 -#define CONF1_DS_BASE 64 -#define CONF1_IA_SHIFT 16 /* I$ associativity */ -#define CONF1_IA_MASK 0x00070000 -#define CONF1_IA_BASE 1 -#define CONF1_IL_SHIFT 19 /* I$ line size */ -#define CONF1_IL_MASK 0x00380000 -#define CONF1_IL_BASE 2 -#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -#define CONF1_IS_MASK 0x01c00000 -#define CONF1_IS_BASE 64 - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - - .text - LEAF(startup) - .set noreorder - addi sp, -48 - sw a0, 16(sp) - sw a1, 20(sp) - sw a2, 24(sp) - sw a3, 28(sp) - - /* Copy decompressor code to the right place */ - li t2, BZ_TEXT_START - add a0, t2, 0 - la a1, code_start - la a2, code_stop -$L1: - lw t0, 0(a1) - sw t0, 0(a0) - add a1, 4 - add a0, 4 - blt a1, a2, $L1 - nop - - /* At this point we need to invalidate dcache and */ - /* icache before jumping to new code */ - -1: /* Get cache sizes */ - .set mips32 - mfc0 s0,C0_CONFIG,1 - .set mips0 - - li s1,CONF1_DL_MASK - and s1,s0 - beq s1,zero,nodc - nop - - srl s1,CONF1_DL_SHIFT - li t0,CONF1_DL_BASE - sll s1,t0,s1 /* s1 has D$ cache line size */ - - li s2,CONF1_DA_MASK - and s2,s0 - srl s2,CONF1_DA_SHIFT - addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ - - li t0,CONF1_DS_MASK - and t0,s0 - srl t0,CONF1_DS_SHIFT - li s3,CONF1_DS_BASE - sll s3,s3,t0 /* s3 has D$ sets per way */ - - multu s2,s3 /* sets/way * associativity */ - mflo t0 /* total cache lines */ - - multu s1,t0 /* D$ linesize * lines */ - mflo s2 /* s2 is now D$ size in bytes */ - - /* Initilize the D$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s2 /* + size of cache == end */ - - .set mips3 -1: cache Index_Writeback_Inv_D,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s1 - -nodc: - /* Now we get to do it all again for the I$ */ - - move s3,zero /* just in case there is no icache */ - move s4,zero - - li t0,CONF1_IL_MASK - and t0,s0 - beq t0,zero,noic - nop - - srl t0,CONF1_IL_SHIFT - li s3,CONF1_IL_BASE - sll s3,t0 /* s3 has I$ cache line size */ - - li t0,CONF1_IA_MASK - and t0,s0 - srl t0,CONF1_IA_SHIFT - addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ - - li t0,CONF1_IS_MASK - and t0,s0 - srl t0,CONF1_IS_SHIFT - li s5,CONF1_IS_BASE - sll s5,t0 /* s5 has I$ sets per way */ - - multu s4,s5 /* sets/way * associativity */ - mflo t0 /* s4 is now total cache lines */ - - multu s3,t0 /* I$ linesize * lines */ - mflo s4 /* s4 is cache size in bytes */ - - /* Initilize the I$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s4 /* + size of cache == end */ - - .set mips3 -1: cache Index_Invalidate_I,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s3 - -noic: - move a0,s3 /* icache line size */ - move a1,s4 /* icache size */ - move a2,s1 /* dcache line size */ - jal t2 - move a3,s2 /* dcache size */ - - .set reorder - END(startup) diff --git a/target/tools/lzma-loader/.svn/text-base/loader.lds.in.svn-base b/target/tools/lzma-loader/.svn/text-base/loader.lds.in.svn-base deleted file mode 100644 index 20f2ea98e..000000000 --- a/target/tools/lzma-loader/.svn/text-base/loader.lds.in.svn-base +++ /dev/null @@ -1,17 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(startup) -SECTIONS { - . = TEXT_START; - .text : { - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } -} diff --git a/target/tools/lzma-loader/Makefile b/target/tools/lzma-loader/Makefile deleted file mode 100644 index ad4a531b6..000000000 --- a/target/tools/lzma-loader/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: - $(MAKE) -C src CC="$(TARGET_CC)" LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)" \ - INCLUDE="-I$(LINUX_DIR)/arch/mips/include" diff --git a/target/tools/lzma-loader/src/LzmaDecode.c b/target/tools/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index 951700bdd..000000000 --- a/target/tools/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,663 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -typedef struct _CRangeDecoder -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback; - int Result; - #endif - int ExtraBytes; -} CRangeDecoder; - -Byte RangeDecoderReadByte(CRangeDecoder *rd) -{ - if (rd->Buffer == rd->BufferLim) - { - #ifdef _LZMA_IN_CB - UInt32 size; - rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); - rd->BufferLim = rd->Buffer + size; - if (size == 0) - #endif - { - rd->ExtraBytes = 1; - return 0xFF; - } - } - return (*rd->Buffer++); -} - -/* #define ReadByte (*rd->Buffer++) */ -#define ReadByte (RangeDecoderReadByte(rd)) - -void RangeDecoderInit(CRangeDecoder *rd, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - Byte *stream, UInt32 bufferSize - #endif - ) -{ - int i; - #ifdef _LZMA_IN_CB - rd->InCallback = inCallback; - rd->Buffer = rd->BufferLim = 0; - #else - rd->Buffer = stream; - rd->BufferLim = stream + bufferSize; - #endif - rd->ExtraBytes = 0; - rd->Code = 0; - rd->Range = (0xFFFFFFFF); - for(i = 0; i < 5; i++) - rd->Code = (rd->Code << 8) | ReadByte; -} - -#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; -#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; -#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } - -UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) -{ - RC_INIT_VAR - UInt32 result = 0; - int i; - for (i = numTotalBits; i > 0; i--) - { - /* UInt32 t; */ - range >>= 1; - - result <<= 1; - if (code >= range) - { - code -= range; - result |= 1; - } - /* - t = (code - range) >> 31; - t &= 1; - code -= range & (t - 1); - result = (result + result) | (1 - t); - */ - RC_NORMALIZE - } - RC_FLUSH_VAR - return result; -} - -int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) -{ - UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; - if (rd->Code < bound) - { - rd->Range = bound; - *prob += (kBitModelTotal - *prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 0; - } - else - { - rd->Range -= bound; - rd->Code -= bound; - *prob -= (*prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 1; - } -} - -#define RC_GET_BIT2(prob, mi, A0, A1) \ - UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ - if (code < bound) \ - { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ - else \ - { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ - RC_NORMALIZE - -#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) - -int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = numLevels; i > 0; i--) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT(prob, mi) - #else - mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return mi - (1 << numLevels); -} - -int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - int symbol = 0; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = 0; i < numLevels; i++) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) - #else - int bit = RangeDecoderBitDecode(probs + mi, rd); - mi = mi + mi + bit; - symbol |= (bit << i); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - int bit; - int matchBit = (matchByte >> 7) & 1; - matchByte <<= 1; - #ifdef _LZMA_LOC_OPT - { - CProb *prob = probs + ((1 + matchBit) << 8) + symbol; - RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) - } - #else - bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); - symbol = (symbol << 1) | bit; - #endif - if (matchBit != bit) - { - while (symbol < 0x100) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - break; - } - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - -int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) -{ - if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) - return RangeDecoderBitTreeDecode(p + LenLow + - (posState << kLenNumLowBits), kLenNumLowBits, rd); - if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) - return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + - (posState << kLenNumMidBits), kLenNumMidBits, rd); - return kLenNumLowSymbols + kLenNumMidSymbols + - RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); -} - -#define kNumStates 12 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#ifdef _LZMA_OUT_READ - -typedef struct _LzmaVarState -{ - CRangeDecoder RangeDecoder; - Byte *Dictionary; - UInt32 DictionarySize; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 Reps[4]; - int lc; - int lp; - int pb; - int State; - int PreviousIsMatch; - int RemainLen; -} LzmaVarState; - -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif - ) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - UInt32 i; - if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - vs->Dictionary = dictionary; - vs->DictionarySize = dictionarySize; - vs->DictionaryPos = 0; - vs->GlobalPos = 0; - vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; - vs->lc = lc; - vs->lp = lp; - vs->pb = pb; - vs->State = 0; - vs->PreviousIsMatch = 0; - vs->RemainLen = 0; - dictionary[dictionarySize - 1] = 0; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&vs->RangeDecoder, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); - return LZMA_RESULT_OK; -} - -int LzmaDecode(unsigned char *buffer, - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - CRangeDecoder rd = vs->RangeDecoder; - int state = vs->State; - int previousIsMatch = vs->PreviousIsMatch; - Byte previousByte; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << (vs->pb)) - 1; - UInt32 literalPosMask = (1 << (vs->lp)) - 1; - int lc = vs->lc; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - if (len == -1) - { - *outSizeProcessed = 0; - return LZMA_RESULT_OK; - } - - while(len > 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; -#else - -int LzmaDecode( - Byte *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - CProb *p = (CProb *)buffer; - CRangeDecoder rd; - UInt32 i; - int state = 0; - int previousIsMatch = 0; - Byte previousByte = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << pb) - 1; - UInt32 literalPosMask = (1 << lp) - 1; - int len = 0; - if (bufferSize < numProbs * sizeof(CProb)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&rd, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); -#endif - - *outSizeProcessed = 0; - while(nowPos < outSize) - { - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - #ifdef _LZMA_IN_CB - if (rd.Result != LZMA_RESULT_OK) - return rd.Result; - #endif - if (rd.ExtraBytes != 0) - return LZMA_RESULT_DATA_ERROR; - if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - CProb *probs = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - if (previousIsMatch) - { - Byte matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); - previousIsMatch = 0; - } - else - previousByte = LzmaLiteralDecode(probs, &rd); - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - } - else - { - previousIsMatch = 1; - if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) - { - if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) - { - if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - if ( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - == 0) - return LZMA_RESULT_DATA_ERROR; - state = state < 7 ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - continue; - } - } - else - { - UInt32 distance; - if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) - distance = rep1; - else - { - if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) - distance = rep2; - else - { - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - len = LzmaLenDecode(p + RepLenCoder, &rd, posState); - state = state < 7 ? 8 : 11; - } - else - { - int posSlot; - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < 7 ? 7 : 10; - len = LzmaLenDecode(p + LenCoder, &rd, posState); - posSlot = RangeDecoderBitTreeDecode(p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits), kNumPosSlotBits, &rd); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); - if (posSlot < kEndPosModelIndex) - { - rep0 += RangeDecoderReverseBitTreeDecode( - p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); - } - else - { - rep0 += RangeDecoderDecodeDirectBits(&rd, - numDirectBits - kNumAlignBits) << kNumAlignBits; - rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); - } - } - else - rep0 = posSlot; - rep0++; - } - if (rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = -1; - break; - } - if (rep0 > nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - { - return LZMA_RESULT_DATA_ERROR; - } - len += kMatchMinLen; - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - len--; - } - while(len > 0 && nowPos < outSize); - } - } - - #ifdef _LZMA_OUT_READ - vs->RangeDecoder = rd; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + nowPos; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->PreviousIsMatch = previousIsMatch; - vs->RemainLen = len; - #endif - - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/tools/lzma-loader/src/LzmaDecode.h b/target/tools/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index f58944e3c..000000000 --- a/target/tools/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 -#define LZMA_RESULT_NOT_ENOUGH_MEM 2 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -/* -bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -bufferSize += 100 in case of _LZMA_OUT_READ -by default CProb is unsigned short, -but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -*/ - -#ifdef _LZMA_OUT_READ -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif -); -#endif - -int LzmaDecode( - unsigned char *buffer, - #ifndef _LZMA_OUT_READ - UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#endif diff --git a/target/tools/lzma-loader/src/LzmaDecode.o b/target/tools/lzma-loader/src/LzmaDecode.o Binary files differdeleted file mode 100644 index 3d7be3f4d..000000000 --- a/target/tools/lzma-loader/src/LzmaDecode.o +++ /dev/null diff --git a/target/tools/lzma-loader/src/Makefile b/target/tools/lzma-loader/src/Makefile deleted file mode 100644 index f5d780c2b..000000000 --- a/target/tools/lzma-loader/src/Makefile +++ /dev/null @@ -1,78 +0,0 @@ -# -# Makefile for Broadcom BCM947XX boards -# -# Copyright 2001-2003, Broadcom Corporation -# All Rights Reserved. -# -# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -# -# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org> -# Modified to support bzip'd kernels. -# Of course, it would be better to integrate bunzip capability into CFE. -# -# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su> -# Cleaned up, modified for lzma support, removed from kernel -# - -TEXT_START := 0x80001000 -BZ_TEXT_START := 0x80400000 - -OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -ffunction-sections -pipe -mlong-calls -fno-common \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB -CFLAGS += $(INCLUDE) - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) - -SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/ - -OBJECTS := head.o data.o - -all: loader.gz loader.elf - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -loader.gz: loader - gzip -nc9 $< > $@ - -loader.elf: loader.o - cp $< $@ - -loader: loader.o - $(OBJCOPY) $< $@ - -loader.o: loader.lds $(OBJECTS) - $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS) - -loader.lds: loader.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ - -data.o: data.lds decompress.image - $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips - -data.lds: - @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ - -decompress.image: decompress - $(OBJCOPY) $< $@ - -decompress: decompress.lds decompress.o LzmaDecode.o - $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o - -decompress.lds: decompress.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ - -mrproper: clean - -clean: - rm -f loader.gz loader decompress *.lds *.o *.image diff --git a/target/tools/lzma-loader/src/README b/target/tools/lzma-loader/src/README deleted file mode 100644 index 16649e950..000000000 --- a/target/tools/lzma-loader/src/README +++ /dev/null @@ -1,55 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -The code is intended to decompress kernel, being compressed using lzma utility -build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory - -decompressor code expects that your .trx file consist of three partitions: - -1) decompressor itself (this is gziped code which pmon/cfe will extract and run -on boot-up instead of real kernel) -2) LZMA compressed kernel (both streamed and regular modes are supported now) -3) Root filesystem - -Please be sure to apply the following patch for use this new trx layout (it will -allow using both new and old trx files for root filesystem lookup code) - ---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 -+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 -@@ -221,7 +221,9 @@ - /* Try looking at TRX header for rootfs offset */ - if (le32_to_cpu(trx->magic) == TRX_MAGIC) { - bcm947xx_parts[1].offset = off; -- if (le32_to_cpu(trx->offsets[1]) > off) -+ if (le32_to_cpu(trx->offsets[2]) > off) -+ off = le32_to_cpu(trx->offsets[2]); -+ else if (le32_to_cpu(trx->offsets[1]) > off) - off = le32_to_cpu(trx->offsets[1]); - continue; - } - - -Revision history: - 0.02 Initial release - 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual - output size to decoder (stream mode compressed input is not - a requirement anymore) - 0.04 Reordered functions using lds script diff --git a/target/tools/lzma-loader/src/data.lds b/target/tools/lzma-loader/src/data.lds deleted file mode 100644 index ec48b2dfd..000000000 --- a/target/tools/lzma-loader/src/data.lds +++ /dev/null @@ -1 +0,0 @@ -SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }} diff --git a/target/tools/lzma-loader/src/data.o b/target/tools/lzma-loader/src/data.o Binary files differdeleted file mode 100644 index 3c398909f..000000000 --- a/target/tools/lzma-loader/src/data.o +++ /dev/null diff --git a/target/tools/lzma-loader/src/decompress b/target/tools/lzma-loader/src/decompress Binary files differdeleted file mode 100755 index 9b2091e78..000000000 --- a/target/tools/lzma-loader/src/decompress +++ /dev/null diff --git a/target/tools/lzma-loader/src/decompress.c b/target/tools/lzma-loader/src/decompress.c deleted file mode 100644 index 05681b152..000000000 --- a/target/tools/lzma-loader/src/decompress.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Please note, this was code based on the bunzip2 decompressor code - * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left - * is an idea and part of original vendor code - * - * - * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com> - * pass actual output size to decoder (stream mode - * compressed input is not a requirement anymore) - * - * 24-Apr-2005 Oleg I. Vdovikin - * reordered functions using lds script, removed forward decl - * - */ - -#include "LzmaDecode.h" - -#define BCM4710_FLASH 0x1fc00000 /* Flash */ - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -#define cache_unroll(base,op) \ - __asm__ __volatile__( \ - ".set noreorder;\n" \ - ".set mips3;\n" \ - "cache %1, (%0);\n" \ - ".set mips0;\n" \ - ".set reorder\n" \ - : \ - : "r" (base), \ - "i" (op)); - -static __inline__ void blast_icache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += lsize; - } -} - -static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += lsize; - } -} - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ - -struct trx_header { - unsigned int magic; /* "HDR0" */ - unsigned int len; /* Length of file including header */ - unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ - unsigned int flag_version; /* 0:15 flags, 16:31 version */ - unsigned int offsets[3]; /* Offsets of partitions from start of header */ -}; - -#define EDIMAX_PS_HEADER_MAGIC 0x36315350 /* "PS16" */ -#define EDIMAX_PS_HEADER_LEN 0xc /* 12 bytes long for edimax header */ - -/* beyound the image end, size not known in advance */ -extern unsigned char workspace[]; - -unsigned int offset; -unsigned char *data; - -/* flash access should be aligned, so wrapper is used */ -/* read byte from the flash, all accesses are 32-bit aligned */ -static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) -{ - static unsigned int val; - - if (((unsigned int)offset % 4) == 0) { - val = *(unsigned int *)data; - data += 4; - } - - *bufferSize = 1; - *buffer = ((unsigned char *)&val) + (offset++ & 3); - - return LZMA_RESULT_OK; -} - -static __inline__ unsigned char get_byte(void) -{ - unsigned char *buffer; - UInt32 fake; - - return read_byte(0, &buffer, &fake), *buffer; -} - -/* should be the first function */ -void entry(unsigned long icache_size, unsigned long icache_lsize, - unsigned long dcache_size, unsigned long dcache_lsize, - unsigned long fw_arg0, unsigned long fw_arg1, - unsigned long fw_arg2, unsigned long fw_arg3) -{ - unsigned int i; /* temp value */ - unsigned int lc; /* literal context bits */ - unsigned int lp; /* literal pos state bits */ - unsigned int pb; /* pos state bits */ - unsigned int osize; /* uncompressed size */ - - ILzmaInCallback callback; - callback.Read = read_byte; - - /* look for trx header, 32-bit data access */ - for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH)); - ((struct trx_header *)data)->magic != TRX_MAGIC && - ((struct trx_header *)data)->magic != EDIMAX_PS_HEADER_MAGIC; - data += 65536); - - if (((struct trx_header *)data)->magic == EDIMAX_PS_HEADER_MAGIC) - data += EDIMAX_PS_HEADER_LEN; - /* compressed kernel is in the partition 0 or 1 */ - if (((struct trx_header *)data)->offsets[1] > 65536) - data += ((struct trx_header *)data)->offsets[0]; - else - data += ((struct trx_header *)data)->offsets[1]; - - offset = 0; - - /* lzma args */ - i = get_byte(); - lc = i % 9, i = i / 9; - lp = i % 5, pb = i / 5; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - /* decompress kernel */ - if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback, - (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK) - { - blast_dcache(dcache_size, dcache_lsize); - blast_icache(icache_size, icache_lsize); - - /* Jump to load address */ - ((void (*)(unsigned long, unsigned long, unsigned long, - unsigned long)) LOADADDR)(fw_arg0, fw_arg1, fw_arg2, - fw_arg3); - } -} diff --git a/target/tools/lzma-loader/src/decompress.image b/target/tools/lzma-loader/src/decompress.image Binary files differdeleted file mode 100755 index b0cb1af95..000000000 --- a/target/tools/lzma-loader/src/decompress.image +++ /dev/null diff --git a/target/tools/lzma-loader/src/decompress.lds b/target/tools/lzma-loader/src/decompress.lds deleted file mode 100644 index 7da944d0c..000000000 --- a/target/tools/lzma-loader/src/decompress.lds +++ /dev/null @@ -1,20 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(entry) -SECTIONS { - . = 0x80400000; - .text : { - *(.text.entry) - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } - - workspace = .; -} diff --git a/target/tools/lzma-loader/src/decompress.lds.in b/target/tools/lzma-loader/src/decompress.lds.in deleted file mode 100644 index 33f56f8a0..000000000 --- a/target/tools/lzma-loader/src/decompress.lds.in +++ /dev/null @@ -1,20 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(entry) -SECTIONS { - . = BZ_TEXT_START; - .text : { - *(.text.entry) - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } - - workspace = .; -} diff --git a/target/tools/lzma-loader/src/decompress.o b/target/tools/lzma-loader/src/decompress.o Binary files differdeleted file mode 100644 index 483bc0b32..000000000 --- a/target/tools/lzma-loader/src/decompress.o +++ /dev/null diff --git a/target/tools/lzma-loader/src/head.S b/target/tools/lzma-loader/src/head.S deleted file mode 100644 index 3a33e4016..000000000 --- a/target/tools/lzma-loader/src/head.S +++ /dev/null @@ -1,160 +0,0 @@ -/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ -/* cache manipulation adapted from Broadcom code */ -/* idea taken from original bunzip2 decompressor code */ -/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ -/* Licensed under the linux kernel's version of the GPL.*/ - -#include <asm/asm.h> -#include <asm/regdef.h> - -#define KSEG0 0x80000000 - -#define C0_CONFIG $16 -#define C0_TAGLO $28 -#define C0_TAGHI $29 - -#define CONF1_DA_SHIFT 7 /* D$ associativity */ -#define CONF1_DA_MASK 0x00000380 -#define CONF1_DA_BASE 1 -#define CONF1_DL_SHIFT 10 /* D$ line size */ -#define CONF1_DL_MASK 0x00001c00 -#define CONF1_DL_BASE 2 -#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -#define CONF1_DS_MASK 0x0000e000 -#define CONF1_DS_BASE 64 -#define CONF1_IA_SHIFT 16 /* I$ associativity */ -#define CONF1_IA_MASK 0x00070000 -#define CONF1_IA_BASE 1 -#define CONF1_IL_SHIFT 19 /* I$ line size */ -#define CONF1_IL_MASK 0x00380000 -#define CONF1_IL_BASE 2 -#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -#define CONF1_IS_MASK 0x01c00000 -#define CONF1_IS_BASE 64 - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - - .text - LEAF(startup) - .set noreorder - addi sp, -48 - sw a0, 16(sp) - sw a1, 20(sp) - sw a2, 24(sp) - sw a3, 28(sp) - - /* Copy decompressor code to the right place */ - li t2, BZ_TEXT_START - add a0, t2, 0 - la a1, code_start - la a2, code_stop -$L1: - lw t0, 0(a1) - sw t0, 0(a0) - add a1, 4 - add a0, 4 - blt a1, a2, $L1 - nop - - /* At this point we need to invalidate dcache and */ - /* icache before jumping to new code */ - -1: /* Get cache sizes */ - .set mips32 - mfc0 s0,C0_CONFIG,1 - .set mips0 - - li s1,CONF1_DL_MASK - and s1,s0 - beq s1,zero,nodc - nop - - srl s1,CONF1_DL_SHIFT - li t0,CONF1_DL_BASE - sll s1,t0,s1 /* s1 has D$ cache line size */ - - li s2,CONF1_DA_MASK - and s2,s0 - srl s2,CONF1_DA_SHIFT - addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ - - li t0,CONF1_DS_MASK - and t0,s0 - srl t0,CONF1_DS_SHIFT - li s3,CONF1_DS_BASE - sll s3,s3,t0 /* s3 has D$ sets per way */ - - multu s2,s3 /* sets/way * associativity */ - mflo t0 /* total cache lines */ - - multu s1,t0 /* D$ linesize * lines */ - mflo s2 /* s2 is now D$ size in bytes */ - - /* Initilize the D$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s2 /* + size of cache == end */ - - .set mips3 -1: cache Index_Writeback_Inv_D,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s1 - -nodc: - /* Now we get to do it all again for the I$ */ - - move s3,zero /* just in case there is no icache */ - move s4,zero - - li t0,CONF1_IL_MASK - and t0,s0 - beq t0,zero,noic - nop - - srl t0,CONF1_IL_SHIFT - li s3,CONF1_IL_BASE - sll s3,t0 /* s3 has I$ cache line size */ - - li t0,CONF1_IA_MASK - and t0,s0 - srl t0,CONF1_IA_SHIFT - addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ - - li t0,CONF1_IS_MASK - and t0,s0 - srl t0,CONF1_IS_SHIFT - li s5,CONF1_IS_BASE - sll s5,t0 /* s5 has I$ sets per way */ - - multu s4,s5 /* sets/way * associativity */ - mflo t0 /* s4 is now total cache lines */ - - multu s3,t0 /* I$ linesize * lines */ - mflo s4 /* s4 is cache size in bytes */ - - /* Initilize the I$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s4 /* + size of cache == end */ - - .set mips3 -1: cache Index_Invalidate_I,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s3 - -noic: - move a0,s3 /* icache line size */ - move a1,s4 /* icache size */ - move a2,s1 /* dcache line size */ - jal t2 - move a3,s2 /* dcache size */ - - .set reorder - END(startup) diff --git a/target/tools/lzma-loader/src/head.o b/target/tools/lzma-loader/src/head.o Binary files differdeleted file mode 100644 index 04763fa4b..000000000 --- a/target/tools/lzma-loader/src/head.o +++ /dev/null diff --git a/target/tools/lzma-loader/src/loader b/target/tools/lzma-loader/src/loader Binary files differdeleted file mode 100755 index 871117b87..000000000 --- a/target/tools/lzma-loader/src/loader +++ /dev/null diff --git a/target/tools/lzma-loader/src/loader.elf b/target/tools/lzma-loader/src/loader.elf Binary files differdeleted file mode 100755 index 0633a0e77..000000000 --- a/target/tools/lzma-loader/src/loader.elf +++ /dev/null diff --git a/target/tools/lzma-loader/src/loader.gz b/target/tools/lzma-loader/src/loader.gz Binary files differdeleted file mode 100644 index 426c9295e..000000000 --- a/target/tools/lzma-loader/src/loader.gz +++ /dev/null diff --git a/target/tools/lzma-loader/src/loader.lds b/target/tools/lzma-loader/src/loader.lds deleted file mode 100644 index 9d95adbfa..000000000 --- a/target/tools/lzma-loader/src/loader.lds +++ /dev/null @@ -1,17 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(startup) -SECTIONS { - . = 0x80001000; - .text : { - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } -} diff --git a/target/tools/lzma-loader/src/loader.lds.in b/target/tools/lzma-loader/src/loader.lds.in deleted file mode 100644 index 20f2ea98e..000000000 --- a/target/tools/lzma-loader/src/loader.lds.in +++ /dev/null @@ -1,17 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(startup) -SECTIONS { - . = TEXT_START; - .text : { - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } -} diff --git a/target/tools/lzma-loader/src/loader.o b/target/tools/lzma-loader/src/loader.o Binary files differdeleted file mode 100755 index 0633a0e77..000000000 --- a/target/tools/lzma-loader/src/loader.o +++ /dev/null diff --git a/target/tools/lzma/Makefile b/target/tools/lzma/Makefile deleted file mode 100644 index 23cbc7f73..000000000 --- a/target/tools/lzma/Makefile +++ /dev/null @@ -1,31 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk - -PKG_NAME:= lzma -PKG_VERSION:= 4.65 -PKG_RELEASE:= 1 -PKG_MD5SUM:= 434e51a018b4c8ef377bf81520a53af0 -PKG_SITES:= http://downloads.openwrt.org/sources/ - -DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.bz2 -#WRKDIST= ${WRKDIR}/$(PKG_NAME)${PKG_VERSION} - -include ../rules.mk - -all: ${STAGING_HOST_DIR}/bin/lzma - -UTIL_DIR=$(WRKBUILD)/C/LzmaUtil -ALONE_DIR=$(WRKBUILD)/CPP/7zip/Compress/LZMA_Alone - -$(WRKBUILD)/.compiled: ${WRKDIST}/.prepared - $(MAKE) -C $(UTIL_DIR) -f makefile.gcc - $(MAKE) -C $(ALONE_DIR) -f makefile.gcc - touch $@ - -${STAGING_HOST_DIR}/bin/lzma: $(WRKBUILD)/.compiled - $(INSTALL_BIN) $(WRKBUILD)/CPP/7zip/Compress/LZMA_Alone/lzma_alone \ - $(STAGING_DIR)/bin/lzma - -include $(TOPDIR)/mk/tools.mk diff --git a/target/tools/lzma/patches/001-large_files.patch b/target/tools/lzma/patches/001-large_files.patch deleted file mode 100644 index b95fe9e90..000000000 --- a/target/tools/lzma/patches/001-large_files.patch +++ /dev/null @@ -1,13 +0,0 @@ -Index: lzma-4.65/CPP/7zip/Compress/LZMA_Alone/makefile.gcc -=================================================================== ---- lzma-4.65.orig/CPP/7zip/Compress/LZMA_Alone/makefile.gcc 2009-05-15 23:33:51.000000000 +0200 -+++ lzma-4.65/CPP/7zip/Compress/LZMA_Alone/makefile.gcc 2009-06-01 22:00:54.000000000 +0200 -@@ -3,7 +3,7 @@ - CXX_C = gcc -O2 -Wall - LIB = -lm - RM = rm -f --CFLAGS = -c -+CFLAGS = -c -D_FILE_OFFSET_BITS=64 - - ifdef SystemDrive - IS_MINGW = 1 diff --git a/target/tools/lzma/patches/002-lzmp.patch b/target/tools/lzma/patches/002-lzmp.patch deleted file mode 100644 index 72d881cdb..000000000 --- a/target/tools/lzma/patches/002-lzmp.patch +++ /dev/null @@ -1,1059 +0,0 @@ -Index: lzma-4.65/CPP/7zip/Compress/LZMA_Alone/lzmp.cpp -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ lzma-4.65/CPP/7zip/Compress/LZMA_Alone/lzmp.cpp 2009-06-01 22:01:10.000000000 +0200 -@@ -0,0 +1,895 @@ -+/* -+ * LZMA command line tool similar to gzip to encode and decode LZMA files. -+ * -+ * Copyright (C) 2005 Ville Koskinen -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, -+ * USA. -+ */ -+ -+#include "../../../Common/MyInitGuid.h" -+ -+#include <iostream> -+using std::cout; -+using std::cerr; -+using std::endl; -+ -+#include <cstdio> -+#include <cstdlib> -+#include <cstring> -+ -+#include <string> -+using std::string; -+#include <vector> -+using std::vector; -+typedef vector<string> stringVector; -+ -+#include <unistd.h> -+#include <getopt.h> -+#include <signal.h> -+ -+#include <sys/types.h> -+#include <sys/stat.h> -+#include <utime.h> -+#include <sys/time.h> // futimes() -+ -+// For Solaris -+#ifndef HAVE_FUTIMES -+//#define futimes(fd, tv) futimesat(fd, NULL, tv) -+#endif -+ -+#if defined(_WIN32) || defined(OS2) || defined(MSDOS) -+#include <fcntl.h> -+#include <io.h> -+#define MY_SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY) -+#else -+#define MY_SET_BINARY_MODE(file) -+#endif -+ -+#include "../../../7zip/Common/FileStreams.h" -+ -+#include "../../../Common/Types.h" -+ -+#include "../../../7zip/Compress/LzmaDecoder.h" -+#include "../../../7zip/Compress/LzmaEncoder.h" -+ -+#include "Exception.h" -+ -+#include "lzma_version.h" -+ -+namespace lzma { -+ -+const char *PROGRAM_VERSION = PACKAGE_VERSION; -+const char *PROGRAM_COPYRIGHT = "Copyright (C) 2006 Ville Koskinen"; -+ -+/* LZMA_Alone switches: -+ -a{N}: set compression mode - [0, 2], default: 2 (max) -+ -d{N}: set dictionary - [0,28], default: 23 (8MB) -+ -fb{N}: set number of fast bytes - [5, 255], default: 128 -+ -lc{N}: set number of literal context bits - [0, 8], default: 3 -+ -lp{N}: set number of literal pos bits - [0, 4], default: 0 -+ -pb{N}: set number of pos bits - [0, 4], default: 2 -+ -mf{MF_ID}: set Match Finder: [bt2, bt3, bt4, bt4b, pat2r, pat2, -+ pat2h, pat3h, pat4h, hc3, hc4], default: bt4 -+*/ -+ -+struct lzma_option { -+ short compression_mode; // -a -+ short dictionary; // -d -+ short fast_bytes; // -fb -+ wchar_t *match_finder; // -mf -+ short literal_context_bits; // -lc -+ short literal_pos_bits; // -lp -+ short pos_bits; // -pb -+}; -+ -+/* The following is a mapping from gzip/bzip2 style -1 .. -9 compression modes -+ * to the corresponding LZMA compression modes. Thanks, Larhzu, for coining -+ * these. */ -+const lzma_option option_mapping[] = { -+ { 0, 0, 0, NULL, 0, 0, 0}, // -0 (needed for indexing) -+ { 0, 16, 64, L"hc4", 3, 0, 2}, // -1 -+ { 0, 20, 64, L"hc4", 3, 0, 2}, // -2 -+ { 1, 19, 64, L"bt4", 3, 0, 2}, // -3 -+ { 2, 20, 64, L"bt4", 3, 0, 2}, // -4 -+ { 2, 21, 128, L"bt4", 3, 0, 2}, // -5 -+ { 2, 22, 128, L"bt4", 3, 0, 2}, // -6 -+ { 2, 23, 128, L"bt4", 3, 0, 2}, // -7 -+ { 2, 24, 255, L"bt4", 3, 0, 2}, // -8 -+ { 2, 25, 255, L"bt4", 3, 0, 2}, // -9 -+}; -+ -+struct extension_pair { -+ char *from; -+ char *to; -+}; -+ -+const extension_pair known_extensions[] = { -+ { ".lzma", "" }, -+ { ".tlz", ".tar" }, -+ { NULL, NULL } -+}; -+ -+/* Sorry, I just happen to like enumerations. */ -+enum PROGRAM_MODE { -+ PM_COMPRESS = 0, -+ PM_DECOMPRESS, -+ PM_TEST, -+ PM_HELP, -+ PM_LICENSE, -+ PM_VERSION -+}; -+ -+enum { -+ STATUS_OK = 0, -+ STATUS_ERROR = 1, -+ STATUS_WARNING = 2 -+}; -+ -+/* getopt options. */ -+/* struct option { name, has_arg, flag, val } */ -+const struct option long_options[] = { -+ { "stdout", 0, 0, 'c' }, -+ { "decompress", 0, 0, 'd' }, -+ { "compress", 0, 0, 'z' }, -+ { "keep", 0, 0, 'k' }, -+ { "force", 0, 0, 'f' }, -+ { "test", 0, 0, 't' }, -+ { "suffix", 1, 0, 'S' }, -+ { "quiet", 0, 0, 'q' }, -+ { "verbose", 0, 0, 'v' }, -+ { "help", 0, 0, 'h' }, -+ { "license", 0, 0, 'L' }, -+ { "version", 0, 0, 'V' }, -+ { "fast", 0, 0, '1' }, -+ { "best", 0, 0, '9' }, -+ { 0, 0, 0, 0 } -+}; -+ -+/* getopt option string (for the above options). */ -+const char option_string[] = "cdzkftS:qvhLV123456789A:D:F:"; -+ -+/* Defaults. */ -+PROGRAM_MODE program_mode = PM_COMPRESS; -+int verbosity = 0; -+bool stdinput = false; -+bool stdoutput = false; -+bool keep = false; -+bool force = false; -+int compression_mode = 7; -+//char *suffix = strdup(".lzma"); -+char *suffix = strdup(known_extensions[0].from); -+lzma_option advanced_options = { -1, -1, -1, NULL, -1, -1, -1 }; -+ -+void print_help(const char *const argv0) -+{ -+ // Help goes to stdout while other messages go to stderr. -+ cout << "\nlzma " << PROGRAM_VERSION -+ << " " << PROGRAM_COPYRIGHT << "\n" -+ "Based on LZMA SDK " << LZMA_SDK_VERSION_STRING << " " -+ << LZMA_SDK_COPYRIGHT_STRING -+ << "\n\nUsage: " << argv0 -+ << " [flags and input files in any order]\n" -+" -c --stdout output to standard output\n" -+" -d --decompress force decompression\n" -+" -z --compress force compression\n" -+" -k --keep keep (don't delete) input files\n" -+" -f --force force overwrite of output file and compress links\n" -+" -t --test test compressed file integrity\n" -+" -S .suf --suffix .suf use suffix .suf on compressed files\n" -+" -q --quiet suppress error messages\n" -+" -v --verbose be verbose\n" -+" -h --help print this message\n" -+" -L --license display the license information\n" -+" -V --version display version numbers of LZMA SDK and lzma\n" -+" -1 .. -2 fast compression\n" -+" -3 .. -9 good to excellent compression. -7 is the default.\n" -+" --fast alias for -1\n" -+" --best alias for -9 (usually *not* what you want)\n\n" -+" Memory usage depends a lot on the chosen compression mode -1 .. -9.\n" -+" See the man page lzma(1) for details.\n\n"; -+} -+ -+void print_license(void) -+{ -+ cout << "\n LZMA command line tool " << PROGRAM_VERSION << " - " -+ << PROGRAM_COPYRIGHT -+ << "\n LZMA SDK " << LZMA_SDK_VERSION_STRING << " - " -+ << LZMA_SDK_COPYRIGHT_STRING -+ << "\n This program is a part of the LZMA utils package.\n" -+ " http://tukaani.org/lzma/\n\n" -+" This program is free software; you can redistribute it and/or\n" -+" modify it under the terms of the GNU General Public License\n" -+" as published by the Free Software Foundation; either version 2\n" -+" of the License, or (at your option) any later version.\n" -+"\n" -+" This program is distributed in the hope that it will be useful,\n" -+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -+" GNU General Public License for more details.\n" -+"\n"; -+} -+ -+void print_version(void) -+{ -+ cout << "LZMA command line tool " << PROGRAM_VERSION << "\n" -+ << "LZMA SDK " << LZMA_SDK_VERSION_STRING << "\n"; -+} -+ -+short str2int (const char *str, const int &min, const int &max) -+{ -+ int value = -1; -+ char *endptr = NULL; -+ if (str == NULL || str[0] == '\0') -+ throw ArgumentException("Invalid integer option"); -+ value = strtol (str, &endptr, 10); -+ if (*endptr != '\0' || value < min || value > max) -+ throw ArgumentException("Invalid integer option"); -+ return value; -+} -+ -+void parse_options(int argc, char **argv, stringVector &filenames) -+{ -+ /* Snatched from getopt(3). */ -+ int c; -+ -+ /* Check how we were called */ -+ { -+ char *p = strrchr (argv[0], '/'); // Remove path prefix, if any -+ if (p++ == NULL) -+ p = argv[0]; -+ if (strstr (p, "un") != NULL) { -+ program_mode = PM_DECOMPRESS; -+ } else if (strstr (p, "cat") != NULL) { -+ program_mode = PM_DECOMPRESS; -+ stdoutput = true; -+ } -+ } -+ -+ while (-1 != (c = getopt_long(argc, argv, option_string, -+ long_options, NULL))) { -+ switch (c) { -+ // stdout -+ case 'c': -+ stdoutput = true; -+ break; -+ -+ // decompress -+ case 'd': -+ program_mode = PM_DECOMPRESS; -+ break; -+ -+ // compress -+ case 'z': -+ program_mode = PM_COMPRESS; -+ break; -+ -+ // keep -+ case 'k': -+ keep = true; -+ break; -+ -+ // force -+ case 'f': -+ force = true; -+ break; -+ -+ // test -+ case 't': -+ program_mode = PM_TEST; -+ break; -+ -+ // suffix -+ case 'S': -+ if (optarg) { -+ free(suffix); -+ suffix = strdup(optarg); -+ } -+ break; -+ -+ // quiet -+ case 'q': -+ verbosity = 0; -+ break; -+ -+ // verbose -+ case 'v': -+ verbosity++; -+ break; -+ -+ // help -+ case 'h': -+ program_mode = PM_HELP; -+ break; -+ -+ // license -+ case 'L': -+ program_mode = PM_LICENSE; -+ break; -+ -+ // version -+ case 'V': -+ program_mode = PM_VERSION; -+ break; -+ -+ case '1': case '2': case '3': case '4': case '5': -+ case '6': case '7': case '8': case '9': -+ compression_mode = c - '0'; -+ break; -+ -+ // Advanced options // -+ // Compression mode -+ case 'A': -+ advanced_options.compression_mode = -+ str2int (optarg, 0, 2); -+ break; -+ -+ // Dictionary size -+ case 'D': -+ advanced_options.dictionary = -+ str2int (optarg, 0, 28); -+ break; -+ -+ // Fast bytes -+ case 'F': -+ advanced_options.fast_bytes = -+ str2int (optarg, 0, 273); -+ break; -+ -+ default: -+ throw ArgumentException(""); -+ break; -+ } // switch(c) -+ } // while(1) -+ -+ for (int i = optind; i < argc; i++) { -+ if (strcmp("-", argv[i]) == 0) -+ continue; -+ filenames.push_back(argv[i]); -+ } -+} // parse_options -+ -+void set_encoder_properties(NCompress::NLzma::CEncoder *encoder, -+ lzma_option &opt) -+{ -+ /* Almost verbatim from LzmaAlone.cpp. */ -+ PROPID propIDs[] = -+ { -+ NCoderPropID::kDictionarySize, -+ NCoderPropID::kPosStateBits, -+ NCoderPropID::kLitContextBits, -+ NCoderPropID::kLitPosBits, -+ NCoderPropID::kAlgorithm, -+ NCoderPropID::kNumFastBytes, -+ NCoderPropID::kMatchFinder, -+ NCoderPropID::kEndMarker -+ }; -+ const int kNumProps = sizeof(propIDs) / sizeof(propIDs[0]); -+#define VALUE(x) (advanced_options.x >= 0 ? advanced_options.x : opt.x) -+ PROPVARIANT properties[kNumProps]; -+ for (int p = 0; p < 6; p++) -+ properties[p].vt = VT_UI4; -+ properties[0].ulVal = UInt32(1 << VALUE (dictionary)); -+ properties[1].ulVal = UInt32(VALUE (pos_bits)); -+ properties[2].ulVal = UInt32(VALUE (literal_context_bits)); -+ properties[3].ulVal = UInt32(VALUE (literal_pos_bits)); -+ properties[4].ulVal = UInt32(VALUE (compression_mode)); -+ properties[5].ulVal = UInt32(VALUE (fast_bytes)); -+#undef VALUE -+ -+ properties[6].vt = VT_BSTR; -+ properties[6].bstrVal = (BSTR)opt.match_finder; -+ -+ properties[7].vt = VT_BOOL; -+ properties[7].boolVal = stdinput ? VARIANT_TRUE : VARIANT_FALSE; -+ -+ if (encoder->SetCoderProperties(propIDs, properties, kNumProps) != S_OK) -+ throw Exception("SetCoderProperties() error"); -+} -+ -+void encode(NCompress::NLzma::CEncoder *encoderSpec, -+ CMyComPtr<ISequentialInStream> inStream, -+ CMyComPtr<ISequentialOutStream> outStream, -+ lzma_option encoder_options, -+ UInt64 fileSize) -+{ -+ set_encoder_properties(encoderSpec, encoder_options); -+ -+ encoderSpec->WriteCoderProperties(outStream); -+ -+ for (int i = 0; i < 8; i++) -+ { -+ Byte b = Byte(fileSize >> (8 * i)); -+ if (outStream->Write(&b, sizeof(b), 0) != S_OK) -+ throw Exception("Write error while encoding"); -+ } -+ -+ HRESULT result = encoderSpec->Code(inStream, outStream, 0, 0, 0); -+ -+ if (result == E_OUTOFMEMORY) -+ throw Exception("Cannot allocate memory"); -+ else if (result != S_OK) { -+ char buffer[33]; -+ snprintf(buffer, 33, "%d", (unsigned int)result); -+ throw Exception(string("Encoder error: ") + buffer); -+ } -+} -+ -+void decode(NCompress::NLzma::CDecoder *decoderSpec, -+ CMyComPtr<ISequentialInStream> inStream, -+ CMyComPtr<ISequentialOutStream> outStream) -+{ -+ const UInt32 kPropertiesSize = 5; -+ Byte properties[kPropertiesSize]; -+ UInt32 processedSize; -+ UInt64 fileSize = 0; -+ -+ if (inStream->Read(properties, kPropertiesSize, &processedSize) != S_OK) -+ throw Exception("Read error"); -+ if (processedSize != kPropertiesSize) -+ throw Exception("Read error"); -+ if (decoderSpec->SetDecoderProperties2(properties, kPropertiesSize) != S_OK) -+ throw Exception("SetDecoderProperties() error"); -+ -+ for (int i = 0; i < 8; i++) -+ { -+ Byte b; -+ -+ if (inStream->Read(&b, sizeof(b), &processedSize) != S_OK) -+ throw Exception("Read error"); -+ if (processedSize != 1) -+ throw Exception("Read error"); -+ -+ fileSize |= ((UInt64)b) << (8 * i); -+ } -+ -+ if (decoderSpec->Code(inStream, outStream, 0, &fileSize, 0) != S_OK) -+ throw Exception("Decoder error"); -+} -+ -+int open_instream(const string infile, -+ CMyComPtr<ISequentialInStream> &inStream, -+ UInt64 &fileSize) -+{ -+ CInFileStream *inStreamSpec = new CInFileStream; -+ inStream = inStreamSpec; -+ if (!inStreamSpec->Open(infile.c_str())) -+ throw Exception("Cannot open input file " + infile); -+ -+ inStreamSpec->File.GetLength(fileSize); -+ -+ return inStreamSpec->File.GetHandle(); -+} -+ -+int open_outstream(const string outfile, -+ CMyComPtr<ISequentialOutStream> &outStream) -+{ -+ COutFileStream *outStreamSpec = new COutFileStream; -+ outStream = outStreamSpec; -+ -+ bool open_by_force = (program_mode == PM_TEST) | force; -+ -+ if (!outStreamSpec->Create(outfile.c_str(), open_by_force)) -+ throw Exception("Cannot open output file " + outfile); -+ -+ return outStreamSpec->File.GetHandle(); -+} -+ -+double get_ratio(int inhandle, int outhandle) -+{ -+ struct stat in_stats, out_stats; -+ fstat(inhandle, &in_stats); -+ fstat(outhandle, &out_stats); -+ -+ return (double)out_stats.st_size / (double)in_stats.st_size; -+} -+ -+mode_t get_file_mode(string filename) -+{ -+ struct stat in_stat; -+ lstat(filename.c_str(), &in_stat); -+ -+ return in_stat.st_mode; -+} -+ -+bool string_ends_with(string str, string ending) -+{ -+ return equal(ending.rbegin(), ending.rend(), str.rbegin()); -+} -+ -+bool extension_is_known(string filename) -+{ -+ bool known_format = false; -+ extension_pair extension; int i = 1; -+ -+ extension = known_extensions[0]; -+ while (extension.from != NULL) { -+ if (string_ends_with(filename, extension.from)) { -+ known_format = true; -+ break; -+ } -+ extension = known_extensions[i]; -+ i++; -+ } -+ -+ if (!known_format) { -+ if (!string_ends_with(filename, suffix)) { -+ return false; -+ } -+ } -+ -+ return true; -+} -+ -+string replace_extension(string filename) -+{ -+ int suffix_starts_at = filename.length() - strlen (suffix); -+ string from_suffix = filename.substr(suffix_starts_at, strlen (suffix)); -+ string ret = filename.substr(0, suffix_starts_at); -+ extension_pair extension; int i = 1; -+ -+ bool found_replacement = false; -+ extension = known_extensions[0]; -+ while (extension.from != NULL) { -+ if (from_suffix.compare(extension.from) == 0) { -+ ret += extension.to; -+ found_replacement = true; -+ break; -+ } -+ -+ extension = known_extensions[i]; -+ i++; -+ } -+ -+ return ret; -+} -+ -+string pretty_print_status(string filename, string output_filename, -+ string ratio) -+{ -+ string ret = ""; -+ -+ ret += filename; -+ ret += ":\t "; -+ -+ if (program_mode == PM_TEST) { -+ ret += "decoded succesfully"; -+ -+ return ret; -+ } -+ -+ if (!stdinput && !stdoutput) { -+ ret += ratio; -+ ret += " -- "; -+ } -+ -+ if (program_mode == PM_COMPRESS) { -+ if (keep) { -+ ret += "encoded succesfully"; -+ -+ return ret; -+ } -+ -+ ret += "replaced with "; -+ ret += output_filename; -+ -+ return ret; -+ } -+ -+ if (program_mode == PM_DECOMPRESS) { -+ if (keep) { -+ ret += "decoded succesfully"; -+ -+ return ret; -+ } -+ -+ ret += "replaced with "; -+ ret += output_filename; -+ -+ return ret; -+ } -+ -+ return ret; -+} -+ -+static string archive_name; // I know, it is crude, but I haven't found any other -+ // way then making a global variable to transfer filename to handler -+ -+void signal_handler (int signum) -+{ -+ unlink (archive_name.c_str()); // deleting -+ signal (signum, SIG_DFL); // we return the default function to used signal -+ kill (getpid(), signum); // and then send this signal to the process again -+} -+ -+} // namespace lzma -+ -+ -+int main(int argc, char **argv) -+{ -+ using namespace lzma; -+ using std::cerr; -+ -+ stringVector filenames; -+ -+ signal (SIGTERM,signal_handler); -+ signal (SIGHUP,signal_handler); -+ signal (SIGINT,signal_handler); -+ -+ try { -+ parse_options(argc, argv, filenames); -+ } -+ catch (...) { -+ return STATUS_ERROR; -+ } -+ -+ if (program_mode == PM_HELP) { -+ print_help(argv[0]); -+ return STATUS_OK; -+ } -+ else if (program_mode == PM_LICENSE) { -+ print_license(); -+ return STATUS_OK; -+ } -+ else if (program_mode == PM_VERSION) { -+ print_version(); -+ return STATUS_OK; -+ } -+ -+ if (filenames.empty()) { -+ stdinput = true; -+ stdoutput = true; -+ -+ /* FIXME: get rid of this */ -+ filenames.push_back("-"); -+ } -+ -+ /* Protection: always create new files with 0600 in order to prevent -+ * outsiders from reading incomplete data. */ -+ umask(0077); -+ -+ bool warning = false; -+ -+ for (int i = 0; i < filenames.size(); i++) { -+ CMyComPtr<ISequentialInStream> inStream; -+ CMyComPtr<ISequentialOutStream> outStream; -+ UInt64 fileSize = 0; -+ int inhandle = 0, outhandle = 0; -+ string output_filename; -+ -+ if (stdinput) { -+ inStream = new CStdInFileStream; -+ MY_SET_BINARY_MODE(stdin); -+ fileSize = (UInt64)(Int64)-1; -+ -+ inhandle = STDIN_FILENO; -+ -+ outStream = new CStdOutFileStream; -+ MY_SET_BINARY_MODE(stdout); -+ -+ outhandle = STDOUT_FILENO; -+ } -+ else { -+ mode_t infile_mode = get_file_mode(filenames[i]); -+ if (!S_ISREG(infile_mode)) { -+ if (S_ISDIR(infile_mode)) { -+ warning = true; -+ cerr << argv[0] << ": " << filenames[i] << ": " -+ << "cowardly refusing to work on directory" -+ << endl; -+ -+ continue; -+ } -+ else if (S_ISLNK(infile_mode)) { -+ if (!stdoutput && !force) { -+ warning = true; -+ -+ cerr << argv[0] << ": " << filenames[i] << ": " -+ << "cowardly refusing to work on symbolic link " -+ << "(use --force to force encoding or decoding)" -+ << endl; -+ -+ continue; -+ } -+ } -+ else { -+ warning = true; -+ -+ cerr << argv[0] << ": " << filenames[i] << ": " -+ << "doesn't exist or is not a regular file" -+ << endl; -+ -+ continue; -+ } -+ } -+ -+ // Test if the file already ends with *suffix. -+ if (program_mode == PM_COMPRESS && !force -+ && string_ends_with(filenames[i], -+ suffix)) { -+ warning = true; -+ -+ cerr << filenames[i] << " already has " -+ << suffix << " suffix -- unchanged\n"; -+ -+ continue; -+ } -+ -+ // Test if the file extension is known. -+ if (program_mode == PM_DECOMPRESS -+ && !extension_is_known(filenames[i])) { -+ warning = true; -+ -+ cerr << filenames[i] << ": " -+ << " unknown suffix -- unchanged" -+ << endl; -+ -+ continue; -+ } -+ -+ try { -+ inhandle = open_instream(filenames[i], inStream, fileSize); -+ } -+ catch (Exception e) { -+ cerr << argv[0] << ": " << e.what() << endl; -+ return STATUS_ERROR; -+ } -+ -+ if (stdoutput) { -+ outStream = new CStdOutFileStream; -+ MY_SET_BINARY_MODE(stdout); -+ -+ outhandle = STDOUT_FILENO; -+ } -+ else { -+ /* Testing mode is nothing else but decoding -+ * and throwing away the result. */ -+ if (program_mode == PM_TEST) -+ output_filename = "/dev/null"; -+ else if (program_mode == PM_DECOMPRESS) -+ output_filename = replace_extension(filenames[i]); -+ else -+ output_filename = filenames[i] -+ + suffix; -+ archive_name = output_filename; -+ -+ try { -+ outhandle = open_outstream(output_filename, outStream); -+ } -+ catch (Exception e) { -+ cerr << argv[0] << ": " << e.what() << endl; -+ return STATUS_ERROR; -+ } -+ } -+ -+ } -+ -+ // Unless --force is specified, do not read/write compressed -+ // data from/to a terminal. -+ if (!force) { -+ if (program_mode == PM_COMPRESS && isatty(outhandle)) { -+ cerr << argv[0] << ": compressed data not " -+ "written to a terminal. Use " -+ "-f to force compression.\n" -+ << argv[0] << ": For help, type: " -+ << argv[0] << " -h\n"; -+ return STATUS_ERROR; -+ } else if (program_mode == PM_DECOMPRESS -+ && isatty(inhandle)) { -+ cerr << argv[0] << ": compressed data not " -+ "read from a terminal. Use " -+ "-f to force decompression.\n" -+ << argv[0] << ": For help, type: " -+ << argv[0] << " -h\n"; -+ return STATUS_ERROR; -+ } -+ } -+ -+ if (program_mode == PM_COMPRESS) { -+ NCompress::NLzma::CEncoder *encoderSpec = -+ new NCompress::NLzma::CEncoder; -+ -+ lzma_option options = option_mapping[compression_mode]; -+ -+ try { -+ encode(encoderSpec, inStream, outStream, options, fileSize); -+ } -+ catch (Exception e) { -+ cerr << argv[0] << ": " << e.what() << endl; -+ unlink(output_filename.c_str()); -+ delete(encoderSpec); -+ -+ return STATUS_ERROR; -+ } -+ -+ delete(encoderSpec); -+ } -+ else { // PM_DECOMPRESS | PM_TEST -+ NCompress::NLzma::CDecoder *decoderSpec = -+ new NCompress::NLzma::CDecoder; -+ -+ try { -+ decode(decoderSpec, inStream, outStream); -+ } -+ catch (Exception e) { -+ cerr << argv[0] << ": " << e.what() << endl; -+ unlink(output_filename.c_str()); -+ delete(decoderSpec); -+ -+ return STATUS_ERROR; -+ } -+ -+ delete(decoderSpec); -+ } -+ -+ /* Set permissions and owners. */ -+ if ( (program_mode == PM_COMPRESS || program_mode == PM_DECOMPRESS ) -+ && (!stdinput && !stdoutput) ) { -+ -+ int ret = 0; -+ struct stat file_stats; -+ ret = fstat(inhandle, &file_stats); -+ -+ ret = fchmod(outhandle, file_stats.st_mode); -+ ret = fchown(outhandle, file_stats.st_uid, file_stats.st_gid); -+ // We need to call fchmod() again, since otherwise the SUID bits -+ // are lost. -+ ret = fchmod(outhandle, file_stats.st_mode); -+ -+ struct timeval file_times[2]; -+ // Access time -+ file_times[0].tv_sec = file_stats.st_atime; -+ file_times[0].tv_usec = 0; -+ // Modification time -+ file_times[1].tv_sec = file_stats.st_mtime; -+ file_times[1].tv_usec = 0; -+ -+ ret = futimes(outhandle, file_times); -+ -+ if (!keep) -+ unlink(filenames[i].c_str()); -+ } -+ -+ if (verbosity > 0) { -+ if (stdoutput) { -+ cerr << filenames[i] << ":\t "; -+ cerr << "decoded succesfully" -+ << endl; -+ } -+ -+ else { -+ char buf[10] = { 0 }; -+ -+ if (program_mode == PM_DECOMPRESS) -+ snprintf(buf, 10, "%.2f%%", -+ (1 - get_ratio(outhandle, inhandle)) * 100); -+ if (program_mode == PM_COMPRESS) -+ snprintf(buf, 10, "%.2f%%", -+ (1 - get_ratio(inhandle, outhandle)) * 100); -+ -+ string ratio = buf; -+ cerr << pretty_print_status(filenames[i], output_filename, -+ ratio) -+ << endl; -+ } -+ } -+ } -+ -+ if (warning) -+ return STATUS_WARNING; -+ -+ return STATUS_OK; -+} -+ -Index: lzma-4.65/CPP/7zip/Compress/LZMA_Alone/Exception.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ lzma-4.65/CPP/7zip/Compress/LZMA_Alone/Exception.h 2009-06-01 22:01:10.000000000 +0200 -@@ -0,0 +1,45 @@ -+/* A couple of exceptions for lzmp. -+ * -+ * Copyright (C) 2005 Ville Koskinen -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef _EXCEPTION_H_ -+#define _EXCEPTION_H_ -+ -+#include <string> -+using std::string; -+ -+class Exception -+{ -+private: -+ string message; -+public: -+ Exception(char *what): message(what) { } -+ Exception(string what): message(what) { } -+ -+ ~Exception() { } -+ -+ string what(void) { return message; } -+}; -+ -+class ArgumentException: public Exception -+{ -+public: -+ ArgumentException(char *what): Exception(what) { } -+ ArgumentException(string what): Exception(what) { } -+ -+ ~ArgumentException() { } -+}; -+ -+#endif -+ -Index: lzma-4.65/CPP/7zip/Compress/LZMA_Alone/makefile.gcc -=================================================================== ---- lzma-4.65.orig/CPP/7zip/Compress/LZMA_Alone/makefile.gcc 2009-06-01 22:00:54.000000000 +0200 -+++ lzma-4.65/CPP/7zip/Compress/LZMA_Alone/makefile.gcc 2009-06-01 22:06:13.000000000 +0200 -@@ -1,9 +1,10 @@ --PROG = lzma -+PROG = lzma_alone -+PROG2 = lzma - CXX = g++ -O2 -Wall - CXX_C = gcc -O2 -Wall - LIB = -lm - RM = rm -f --CFLAGS = -c -D_FILE_OFFSET_BITS=64 -+CFLAGS = -c -I ../../../ -D_FILE_OFFSET_BITS=64 -DPACKAGE_VERSION="\"4.32.0beta3\"" - - ifdef SystemDrive - IS_MINGW = 1 -@@ -45,12 +46,35 @@ - Lzma86Dec.o \ - Lzma86Enc.o \ - -+OBJS2 = \ -+ C_FileIO.o \ -+ CRC.o \ -+ Alloc.o \ -+ FileStreams.o \ -+ StreamUtils.o \ -+ InBuffer.o \ -+ OutBuffer.o \ -+ LzmaDecoder.o \ -+ StringConvert.o \ -+ StringToInt.o \ -+ LzmaEncoder.o \ -+ LzmaDec.o \ -+ LzmaEnc.o \ -+ LzFind.o \ -+ 7zCrc.o \ -+ lzmp.o - --all: $(PROG) -+all: $(PROG) $(PROG2) - - $(PROG): $(OBJS) - $(CXX) -o $(PROG) $(LDFLAGS) $(OBJS) $(LIB) $(LIB2) - -+$(PROG2): $(OBJS2) -+ $(CXX) -o $(PROG2) $(LDFLAGS) $(OBJS2) $(LIB) -+ -+lzmp.o: lzmp.cpp -+ $(CXX) $(CFLAGS) lzmp.cpp -+ - LzmaAlone.o: LzmaAlone.cpp - $(CXX) $(CFLAGS) LzmaAlone.cpp - -@@ -131,5 +153,5 @@ - $(CXX_C) $(CFLAGS) ../../../../C/LzmaUtil/Lzma86Enc.c - - clean: -- -$(RM) $(PROG) $(OBJS) -+ -$(RM) $(PROG) $(PROG2) $(OBJS) - -Index: lzma-4.65/CPP/7zip/Compress/LZMA_Alone/lzma_version.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ lzma-4.65/CPP/7zip/Compress/LZMA_Alone/lzma_version.h 2009-06-01 22:01:10.000000000 +0200 -@@ -0,0 +1,31 @@ -+#ifndef LZMA_VERSION_H -+#define LZMA_VERSION_H -+ -+/* -+ Version and copyright information used by LZMA utils. -+*/ -+ -+static const char *LZMA_SDK_VERSION_STRING = "4.43"; -+ -+static const char *LZMA_SDK_COPYRIGHT_STRING = -+ "Copyright (C) 1999-2006 Igor Pavlov"; -+ -+static const char *LZMA_SDK_COPYRIGHT_INFO = -+ " See http://7-zip.org/sdk.html or the documentation of LZMA SDK for\n" -+ " the license. For reference, the version 4.43 is free software\n" -+ " licensed under the GNU LGPL."; -+ -+ -+static const char *LZMA_UTILS_VERSION_STRING = PACKAGE_VERSION; -+ -+static const char *LZMA_UTILS_COPYRIGHT_STRING = -+ "Copyright (C) 2006 Lasse Collin"; -+ -+static const char *LZMA_UTILS_COPYRIGHT_INFO = -+ "This program comes with ABSOLUTELY NO WARRANTY.\n" -+ "You may redistribute copies of this program\n" -+ "under the terms of the GNU General Public License.\n" -+ "For more information about these matters, see the file " -+ "named COPYING.\n"; -+ -+#endif /* ifndef LZMA_VERSION_H */ -Index: lzma-4.65/CPP/Common/C_FileIO.h -=================================================================== ---- lzma-4.65.orig/CPP/Common/C_FileIO.h 2009-05-15 23:33:51.000000000 +0200 -+++ lzma-4.65/CPP/Common/C_FileIO.h 2009-06-01 22:06:56.000000000 +0200 -@@ -24,6 +24,7 @@ - bool Close(); - bool GetLength(UInt64 &length) const; - off_t Seek(off_t distanceToMove, int moveMethod) const; -+ int GetHandle() const { return _handle; } - }; - - class CInFile: public CFileBase diff --git a/target/tools/lzma/patches/003-compile_fixes.patch b/target/tools/lzma/patches/003-compile_fixes.patch deleted file mode 100644 index 49ae66b9c..000000000 --- a/target/tools/lzma/patches/003-compile_fixes.patch +++ /dev/null @@ -1,26 +0,0 @@ -diff -urN lzma-4.65/CPP/7zip/Common/FileStreams.h lzma-4.65.new/CPP/7zip/Common/FileStreams.h ---- lzma-4.65/CPP/7zip/Common/FileStreams.h 2009-05-15 23:33:51.000000000 +0200 -+++ lzma-4.65.new/CPP/7zip/Common/FileStreams.h 2009-06-01 22:30:01.000000000 +0200 -@@ -72,6 +72,7 @@ - public IOutStream, - public CMyUnknownImp - { -+public: - #ifdef USE_WIN_FILE - NWindows::NFile::NIO::COutFile File; - #else -diff -urN lzma-4.65/CPP/Common/MyWindows.h lzma-4.65.new/CPP/Common/MyWindows.h ---- lzma-4.65/CPP/Common/MyWindows.h 2009-05-15 23:33:51.000000000 +0200 -+++ lzma-4.65.new/CPP/Common/MyWindows.h 2009-06-01 22:29:26.000000000 +0200 -@@ -101,8 +101,11 @@ - - #ifdef __cplusplus - -+#ifndef INITGUID -+#define INITGUID - DEFINE_GUID(IID_IUnknown, - 0x00000000, 0x0000, 0x0000, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x46); -+#endif - struct IUnknown - { - STDMETHOD(QueryInterface) (REFIID iid, void **outObject) PURE; diff --git a/target/tools/lzma/patches/100-static_library.patch b/target/tools/lzma/patches/100-static_library.patch deleted file mode 100644 index 15ab4e055..000000000 --- a/target/tools/lzma/patches/100-static_library.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/C/LzmaUtil/makefile.gcc -+++ b/C/LzmaUtil/makefile.gcc -@@ -1,44 +1,53 @@ - PROG = lzma --CXX = g++ --LIB = -+CC = gcc -+LIB = liblzma.a - RM = rm -f - CFLAGS = -c -O2 -Wall -+AR = ar -+RANLIB = ranlib - - OBJS = \ -- LzmaUtil.o \ - Alloc.o \ - LzFind.o \ - LzmaDec.o \ - LzmaEnc.o \ -+ LzmaLib.o \ - 7zFile.o \ - 7zStream.o \ - -- - all: $(PROG) - --$(PROG): $(OBJS) -- $(CXX) -o $(PROG) $(LDFLAGS) $(OBJS) $(LIB) $(LIB2) -+$(PROG): LzmaUtil.o $(LIB) -+ $(CC) -o $(PROG) $(LDFLAGS) $< $(LIB) - - LzmaUtil.o: LzmaUtil.c -- $(CXX) $(CFLAGS) LzmaUtil.c -+ $(CC) $(CFLAGS) LzmaUtil.c -+ -+$(LIB): $(OBJS) -+ rm -f $@ -+ $(AR) rcu $@ $(OBJS) -+ $(RANLIB) $@ - - Alloc.o: ../Alloc.c -- $(CXX) $(CFLAGS) ../Alloc.c -+ $(CC) $(CFLAGS) ../Alloc.c - - LzFind.o: ../LzFind.c -- $(CXX) $(CFLAGS) ../LzFind.c -+ $(CC) $(CFLAGS) ../LzFind.c - - LzmaDec.o: ../LzmaDec.c -- $(CXX) $(CFLAGS) ../LzmaDec.c -+ $(CC) $(CFLAGS) ../LzmaDec.c - - LzmaEnc.o: ../LzmaEnc.c -- $(CXX) $(CFLAGS) ../LzmaEnc.c -+ $(CC) $(CFLAGS) ../LzmaEnc.c -+ -+LzmaLib.o: ../LzmaLib.c -+ $(CC) $(CFLAGS) ../LzmaLib.c - - 7zFile.o: ../7zFile.c -- $(CXX) $(CFLAGS) ../7zFile.c -+ $(CC) $(CFLAGS) ../7zFile.c - - 7zStream.o: ../7zStream.c -- $(CXX) $(CFLAGS) ../7zStream.c -+ $(CC) $(CFLAGS) ../7zStream.c - - clean: -- -$(RM) $(PROG) $(OBJS) -+ -$(RM) $(PROG) *.o *.a diff --git a/target/tools/mkfimage/Makefile b/target/tools/mkfimage/Makefile deleted file mode 100644 index 2c6e37878..000000000 --- a/target/tools/mkfimage/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: mkfimage.c - $(CC_FOR_BUILD) ${FLAGS_FOR_BUILD} -o ${STAGING_HOST_DIR}/bin/mkfimage mkfimage.c $(MAKE_TRACE) diff --git a/target/tools/mkfimage/mkfimage.c b/target/tools/mkfimage/mkfimage.c deleted file mode 100644 index b1897fbd7..000000000 --- a/target/tools/mkfimage/mkfimage.c +++ /dev/null @@ -1,72 +0,0 @@ -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <unistd.h> -#include <string.h> -#include <stdlib.h> - -int main(int argc, char **argv){ - unsigned char *buffer = malloc(64 * 1024); - struct stat s; - unsigned int size_vmlinux = 0, real_size_vmlinux = 0; - const unsigned char *magic_str = "ACME_PART_MAGIC"; - unsigned int loop; - unsigned char *magic; - - if(argc != 3){ - printf("%s in out\n", argv[0]); - return 1; - } - - printf("Generating image\n"); - - FILE *vmlinux = fopen(argv[1], "r"); - FILE *vmlinux_out = fopen(argv[2], "w"); - if((!vmlinux) || (!vmlinux_out)){ - printf("Error opening a file\n"); - return 1; - } - - stat(argv[1], &s); - size_vmlinux = s.st_size; - real_size_vmlinux = (size_vmlinux & 0xffff0000) + 0x10000; - - printf("vmlinux = 0x%.08X / 0x%.08X\n", size_vmlinux, real_size_vmlinux); - - unsigned int t = fread(buffer, 1, 64 * 1024, vmlinux); - for(loop = 0; loop < (64 * 1024) - sizeof(magic_str); loop++){ - if(buffer[loop] == magic_str[0]){ - if((magic = strstr(&buffer[loop], magic_str))){ - //printf("Magic at 0x%.08X %p %p\n", magic - buffer, magic, buffer); - printf("Found Magic %X%X%X%X\n", - buffer[loop + strlen(magic_str)], - buffer[loop + strlen(magic_str) + 2], - buffer[loop + strlen(magic_str) + 1], - buffer[loop + strlen(magic_str) + 3]); - - buffer[loop + strlen(magic_str)] = real_size_vmlinux >> 24; - buffer[loop + strlen(magic_str) + 2] = (real_size_vmlinux >> 16) & 0xff; - buffer[loop + strlen(magic_str) + 1] = (real_size_vmlinux >> 8) & 0xff; - buffer[loop + strlen(magic_str) + 3] = (real_size_vmlinux) & 0xff; - - printf("Replaced with %.02X%.02X%.02X%.02X\n", - buffer[loop + strlen(magic_str)], - buffer[loop + strlen(magic_str) + 2], - buffer[loop + strlen(magic_str) + 1], - buffer[loop + strlen(magic_str) + 3]); - - } - } - } - - fwrite(buffer, 1, 64 * 1024, vmlinux_out); - real_size_vmlinux -= 64 * 1024; - do { - real_size_vmlinux -= 64 * 1024; - memset(buffer, 0, 64 * 1024); - fread(buffer, 1, 64 * 1024, vmlinux); - fwrite(buffer, 1, 64 * 1024, vmlinux_out); - } while (real_size_vmlinux); - - return 0; -} diff --git a/target/tools/mtd-utils/Makefile b/target/tools/mtd-utils/Makefile deleted file mode 100644 index 38f10de69..000000000 --- a/target/tools/mtd-utils/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk - -PKG_NAME:= mtd-utils -PKG_VERSION:= 1.5.0 -PKG_RELEASE:= 1 -PKG_MD5SUM:= a4df1ad29684be79b0fa699bdae01faf -PKG_SITES:= http://openadk.org/distfiles/ - -include ../rules.mk - -all: ${STAGING_HOST_DIR}/bin/mkfs.jffs2 - -$(WRKBUILD)/.compiled: ${WRKDIST}/.prepared - ${MAKE} -C ${WRKBUILD} CC='${CC_FOR_BUILD}' CPPFLAGS='-DWITHOUT_XATTR=1 -I./include' - touch $@ - -${STAGING_HOST_DIR}/bin/mkfs.jffs2: $(WRKBUILD)/.compiled - $(INSTALL_BIN) $(WRKBUILD)/mkfs.jffs2 \ - ${STAGING_HOST_DIR}/bin - -include $(TOPDIR)/mk/tools.mk diff --git a/target/tools/mtd-utils/patches/lzo.patch b/target/tools/mtd-utils/patches/lzo.patch deleted file mode 100644 index 52f16146c..000000000 --- a/target/tools/mtd-utils/patches/lzo.patch +++ /dev/null @@ -1,88 +0,0 @@ -diff -Nur mtd-utils-1.5.0.orig/compr.c mtd-utils-1.5.0/compr.c ---- mtd-utils-1.5.0.orig/compr.c 2012-05-07 09:19:39.000000000 +0200 -+++ mtd-utils-1.5.0/compr.c 2014-02-25 21:05:20.000000000 +0100 -@@ -517,9 +517,6 @@ - #ifdef CONFIG_JFFS2_RTIME - jffs2_rtime_init(); - #endif --#ifdef CONFIG_JFFS2_LZO -- jffs2_lzo_init(); --#endif - return 0; - } - -@@ -531,8 +528,5 @@ - #ifdef CONFIG_JFFS2_ZLIB - jffs2_zlib_exit(); - #endif --#ifdef CONFIG_JFFS2_LZO -- jffs2_lzo_exit(); --#endif - return 0; - } -diff -Nur mtd-utils-1.5.0.orig/Makefile mtd-utils-1.5.0/Makefile ---- mtd-utils-1.5.0.orig/Makefile 2012-05-07 09:19:39.000000000 +0200 -+++ mtd-utils-1.5.0/Makefile 2014-02-25 21:13:03.000000000 +0100 -@@ -16,27 +16,13 @@ - - TESTS = tests - --MTD_BINS = \ -- ftl_format flash_erase nanddump doc_loadbios \ -- ftl_check mkfs.jffs2 flash_lock flash_unlock \ -- flash_otp_info flash_otp_dump mtd_debug flashcp nandwrite nandtest \ -- jffs2dump \ -- nftldump nftl_format docfdisk \ -- rfddump rfdformat \ -- serve_image recv_image \ -- sumtool jffs2reader --UBI_BINS = \ -- ubiupdatevol ubimkvol ubirmvol ubicrc32 ubinfo ubiattach \ -- ubidetach ubinize ubiformat ubirename mtdinfo ubirsvol -+MTD_BINS = mkfs.jffs2 - - BINS = $(MTD_BINS) --BINS += mkfs.ubifs/mkfs.ubifs --BINS += $(addprefix ubi-utils/,$(UBI_BINS)) - SCRIPTS = flash_eraseall - - TARGETS = $(BINS) - TARGETS += lib/libmtd.a --TARGETS += ubi-utils/libubi.a - - OBJDEPS = $(BUILDDIR)/include/version.h - -@@ -83,12 +69,12 @@ - # - # Utils in top level - # --obj-mkfs.jffs2 = compr_rtime.o compr_zlib.o compr_lzo.o compr.o rbtree.o --LDFLAGS_mkfs.jffs2 = $(ZLIBLDFLAGS) $(LZOLDFLAGS) --LDLIBS_mkfs.jffs2 = -lz $(LZOLDLIBS) -+obj-mkfs.jffs2 = compr_rtime.o compr_zlib.o compr.o rbtree.o -+LDFLAGS_mkfs.jffs2 = $(ZLIBLDFLAGS) -+LDLIBS_mkfs.jffs2 = -lz - --LDFLAGS_jffs2reader = $(ZLIBLDFLAGS) $(LZOLDFLAGS) --LDLIBS_jffs2reader = -lz $(LZOLDLIBS) -+LDFLAGS_jffs2reader = $(ZLIBLDFLAGS) -+LDLIBS_jffs2reader = -lz - - $(foreach v,$(MTD_BINS),$(eval $(call mkdep,,$(v)))) - -@@ -103,7 +89,7 @@ - # - obj-mkfs.ubifs = crc16.o lpt.o compr.o devtable.o \ - hashtable/hashtable.o hashtable/hashtable_itr.o --LDLIBS_mkfs.ubifs = -lz -llzo2 -lm -luuid -+LDLIBS_mkfs.ubifs = -lz -lm -luuid - $(call mkdep,mkfs.ubifs/,mkfs.ubifs,,ubi-utils/libubi.a) - - # -@@ -117,6 +103,3 @@ - obj-mtdinfo = libubigen.a - obj-ubinize = libubigen.a libiniparser.a - obj-ubiformat = libubigen.a libscan.a -- --$(foreach v,libubi.a libubigen.a libiniparser.a libscan.a,$(eval $(call _mkdep,ubi-utils/,$(v)))) --$(foreach v,$(UBI_BINS),$(eval $(call mkdep,ubi-utils/,$(v),libubi.a ubiutils-common.o))) diff --git a/target/tools/rules.mk b/target/tools/rules.mk deleted file mode 100644 index a6a3684ac..000000000 --- a/target/tools/rules.mk +++ /dev/null @@ -1,7 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -WRKDIR_BASE= ${TOOLS_BUILD_DIR} -WRKDIR= ${WRKDIR_BASE} - -include ${TOPDIR}/mk/buildhlp.mk diff --git a/target/tools/squashfs/Makefile b/target/tools/squashfs/Makefile deleted file mode 100644 index 94b3a0115..000000000 --- a/target/tools/squashfs/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk - -PKG_NAME:= squashfs -PKG_VERSION:= 4.2 -PKG_RELEASE:= 1 -PKG_MD5SUM:= 1b7a781fb4cf8938842279bd3e8ee852 -PKG_SITES:= ${MASTER_SITE_SOURCEFORGE:=squashfs/} - -DISTFILES:= ${PKG_NAME}${PKG_VERSION}.tar.gz -WRKDIST= ${WRKDIR}/$(PKG_NAME)${PKG_VERSION} - -include ../rules.mk - -all: ${STAGING_HOST_DIR}/bin/mksquashfs - -$(WRKBUILD)/.compiled: ${WRKDIST}/.prepared - ${MAKE} -C ${WRKBUILD}/squashfs-tools CC='${CC_FOR_BUILD}' \ - XZ_SUPPORT=1 CPPFLAGS_FOR_BUILD=$(CPPFLAGS_FOR_BUILD) \ - EXTRA_LDFLAGS=$(LDFLAGS_FOR_BUILD) - touch $@ - -${STAGING_HOST_DIR}/bin/mksquashfs: $(WRKBUILD)/.compiled - $(INSTALL_BIN) $(WRKBUILD)/squashfs-tools/mksquashfs \ - ${STAGING_HOST_DIR}/bin - -include $(TOPDIR)/mk/tools.mk diff --git a/target/tools/squashfs/patches/cppflags.patch b/target/tools/squashfs/patches/cppflags.patch deleted file mode 100644 index 1432ea3cf..000000000 --- a/target/tools/squashfs/patches/cppflags.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -Nur squashfs4.2.orig/squashfs-tools/Makefile squashfs4.2/squashfs-tools/Makefile ---- squashfs4.2.orig/squashfs-tools/Makefile 2011-02-28 21:04:15.000000000 +0100 -+++ squashfs4.2/squashfs-tools/Makefile 2013-12-27 13:49:22.000000000 +0100 -@@ -93,7 +93,7 @@ - # End of BUILD options section # - ############################################### - --INCLUDEDIR = -I. -+INCLUDEDIR = -I. $(CPPFLAGS_FOR_BUILD) - INSTALL_DIR = /usr/local/bin - - MKSQUASHFS_OBJS = mksquashfs.o read_fs.o sort.o swap.o pseudo.o compressor.o diff --git a/target/tools/srec2bin/Makefile b/target/tools/srec2bin/Makefile deleted file mode 100644 index f48f8f939..000000000 --- a/target/tools/srec2bin/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: srec2bin.c - $(CC_FOR_BUILD) $(FLAGS_FOR_BUILD) -o ${STAGING_HOST_DIR}/bin/srec2bin srec2bin.c diff --git a/target/tools/srec2bin/srec2bin.c b/target/tools/srec2bin/srec2bin.c deleted file mode 100644 index 8ba4387e6..000000000 --- a/target/tools/srec2bin/srec2bin.c +++ /dev/null @@ -1,521 +0,0 @@ -#include <stdio.h> -#include <ctype.h> -#include <string.h> - -//Rev 0.1 Original -// 8 Jan 2001 MJH Added code to write data to Binary file -// note: outputfile is name.bin, where name is first part -// of input file. ie tmp.rec -> tmp.bin -// -// srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian> -// -// TAG -// bit32u TAG_BIG = 0xDEADBE42; -// bit32u TAG_LITTLE = 0xFEEDFA42; -// -// File Structure -// -// TAG : 32 Bits -// [DATA RECORDS] -// -// Data Records Structure -// -// LENGTH : 32 Bits <- Length of DATA, excludes ADDRESS and CHECKSUM -// ADDRESS : 32 Bits -// DATA : 8 Bits * LENGTH -// CHECKSUM: 32 Bits <- 0 - (Sum of Length --> End of Data) -// -// Note : If Length == 0, Address will be Program Start -// -// -// -// -// - -#define MajRevNum 0 -#define MinRevNum 2 - - -#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) ) - -typedef unsigned char bit8u; -typedef unsigned int bit32u; -typedef int bit32; - -#define FALSE 0 -#define TRUE (!FALSE) - - -bit32u CheckSum; -int RecStart; -int debug; -int verbose; - -FILE *OpenOutputFile( char *Name ); -FILE *fOut; -bit32u RecLength=0; - -bit32u AddressCurrent; - -bit32u gh(char *cp,int nibs); - -int BigEndian; - -int inputline; - -// char buf[16*1024]; - -char buffer[2048]; -char *cur_ptr; -int cur_line=0; -int cur_len=0; - -int s1s2s3_total=0; - -bit32u PBVal; -int PBValid; -bit32u PBAdr; - - -void dumpfTell(char *s, bit32u Value) -{ - int Length; - Length = (int) RecLength; - if (debug) - printf("[%s ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n", - s, ftell(fOut), Length, Length, Value); -} - -void DispHex(bit32u Hex) -{ -// printf("%X", Hex); -} - -void WaitDisplay(void) -{ - static int Count=0; - static int Index=0; - char iline[]={"-\\|/"}; - - Count++; - if ((Count % 32)==0) - { - if (verbose) - printf("%c%c",iline[Index++],8); - Index &= 3; - } -} - - -void binOut32 ( bit32u Data ) -{ -// On UNIX machine all 32bit writes need ENDIAN switched -// Data = EndianSwitch(Data); -// fwrite( &Data, sizeof(bit32u), 1, fOut); - - char sdat[4]; - int i; - - for(i=0;i<4;i++) - sdat[i]=(char)(Data>>(i*8)); - fwrite( sdat, 1, 4, fOut); - dumpfTell("Out32" , Data); -} - -// Only update RecLength on Byte Writes -// All 32 bit writes will be for Length etc - -void binOut8 ( bit8u Data ) -{ - int n; - dumpfTell("B4Data" , (bit32u) (Data & 0xFF) ); - n = fwrite( &Data, sizeof(bit8u), 1, fOut); - if (n != 1) - printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent); - RecLength += 1; -} - -// Currently ONLY used for outputting Program Start - -void binRecStart(bit32u Address) -{ - RecLength = 0; - CheckSum = Address; - RecStart = TRUE; - - if (debug) - printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n", - CheckSum, RecLength, Address); - - - dumpfTell("RecLength", RecLength); - binOut32( RecLength ); - dumpfTell("Address", Address); - binOut32( Address ); -} - -void binRecEnd(void) -{ - long RecEnd; - - if (!RecStart) // if no record started, do not end it - { - return; - } - - RecStart = FALSE; - - - RecEnd = ftell(fOut); // Save Current position - - if (debug) - printf("[RecEnd ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n", - CheckSum, RecLength, RecLength, RecEnd); - - fseek( fOut, -((long) RecLength), SEEK_CUR); // move back Start Of Data - - dumpfTell("Data ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Address - - dumpfTell("Address ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Length - - dumpfTell("Length ", -1); - - binOut32( RecLength ); - - fseek( fOut, RecEnd, SEEK_SET); // move to end of Record - - CheckSum += RecLength; - - CheckSum = ~CheckSum + 1; // Two's complement - - binOut32( CheckSum ); - - if (verbose) - printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum); -} - -void binRecOutProgramStart(bit32u Address) -{ - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; -} -void binRecOutByte(bit32u Address, bit8u Data) -{ - // If Address is one after Current Address, output Byte - // If not, close out last record, update Length, write checksum - // Then Start New Record, updating Current Address - - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; - CheckSum += Data; - binOut8( Data ); -} - -//============================================================================= -// SUPPORT FUNCTIONS -//============================================================================= -int readline(FILE *fil,char *buf,int len) -{ - int rlen; - - rlen=0; - if (len==0) return(0); - while(1) - { - if (cur_len==0) - { - cur_len=fread(buffer, 1, sizeof(buffer), fil); - if (cur_len==0) - { - if (rlen) - { - *buf=0; - return(rlen); - } - return(-1); - } - cur_ptr=buffer; - } - if (cur_len) - { - if (*cur_ptr=='\n') - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - else - { - if ((len>1)&&(*cur_ptr!='\r')) - { - *buf++=*cur_ptr++; - len--; - } - else - cur_ptr++; - - rlen++; - cur_len--; - } - } - else - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - } -} - - -int SRLerrorout(char *c1,char *c2) -{ - printf("\nERROR: %s - '%s'.",c1,c2); - return(FALSE); -} - - -int checksum(char *cp,int count) -{ - char *scp; - int cksum; - int dum; - - scp=cp; - while(*scp) - { - if (!isxdigit(*scp++)) - return(SRLerrorout("Invalid hex digits",cp)); - } - scp=cp; - - cksum=count; - - while(count) - { - cksum += gh(scp,2); - if (count == 2) - dum = ~cksum; - scp += 2; - count--; - } - cksum&=0x0ff; - // printf("\nCk:%02x",cksum); - return(cksum==0x0ff); -} - -bit32u gh(char *cp,int nibs) -{ - int i; - bit32u j; - - j=0; - - for(i=0;i<nibs;i++) - { - j<<=4; - if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f; - if ((*cp>='0')&&(*cp<='9')) - j += (*cp-0x30); - else - if ((*cp>='A')&&(*cp<='F')) - j += (*cp-0x37); - else - SRLerrorout("Bad Hex char", cp); - cp++; - } - return(j); -} - - -//============================================================================= -// PROCESS SREC LINE -//============================================================================= - -int srecLine(char *pSrecLine) -{ - char *scp,ch; - int itmp,count,dat; - bit32u adr; - static bit32u RecordCounter=0; - - cur_line++; - scp=pSrecLine; - - if (*pSrecLine!='S') - return(SRLerrorout("Not an Srecord file",scp)); - pSrecLine++; - if (strlen(pSrecLine)<4) - return(SRLerrorout("Srecord too short",scp)); - - ch=*pSrecLine++; - - count=gh(pSrecLine,2); - - pSrecLine += 2; - - // if(debug) - // printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine); - RecordCounter++; - DispHex(RecordCounter); - - if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp)); - - if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp)); - - switch(ch) - { - case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp)); - break; - case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - count--; - while(count) - { - dat=gh(pSrecLine,2); pSrecLine+=2; count--; - binRecOutByte(adr, (char) (dat & 0xFF)); - adr++; - } - s1s2s3_total++; - break; - case '4': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp)); - break; - case '6': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '7': // PROGRAM START - if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp)); - binRecOutProgramStart(adr); - break; - case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - default: - break; - } - return(TRUE); -} - - -//============================================================================= -// MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY -//============================================================================= - -int srec2bin(int argc,char *argv[],int verbose) -{ - int rlen,sts; - FILE *fp; - char buff[256]; - bit32u TAG_BIG = 0xDEADBE42; - bit32u TAG_LITTLE = 0xFEEDFA42; - - bit32u Tag; - - - if(argc < 3) - { - printf("\nError: <srec2bin <srec input file> <bin output file>\n\n"); - return(0); - } - - if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE; - - if (BigEndian) - Tag = TAG_BIG; - else - Tag = TAG_LITTLE; - - if (verbose) - printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag); - - fp = fopen(argv[1],"rt"); - - if (fp==NULL) - { - printf("\nError: Opening input file, %s.", argv[1]); - return(0); - } - - fOut = fopen( argv[2], "wb"); - - if (fOut==NULL) - { - printf("\nError: Opening Output file, %s.", argv[2]); - if(fp) fclose(fp); - return(0); - } - - RecStart = FALSE; - - AddressCurrent = 0xFFFFFFFFL; - - // Setup Tag - - dumpfTell("Tag", Tag); - - binOut32(Tag); - - - inputline=0; - sts=TRUE; - - rlen = readline(fp,buff,sizeof buff); - - while( (sts) && (rlen != -1)) - { - if (strlen(buff)) - { - sts &= srecLine(buff); - WaitDisplay(); - } - rlen = readline(fp,buff,sizeof buff); - } - - - // printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE); - - binRecEnd(); - - if(fp) fclose(fp); - if(fOut) fclose(fOut); - - return(1); -} - -int main(int argc, char *argv[]) -{ - debug = FALSE; - verbose = FALSE; - srec2bin(argc,argv,verbose); - return 0; -} diff --git a/target/tools/trx/Makefile b/target/tools/trx/Makefile deleted file mode 100644 index d1832ee8c..000000000 --- a/target/tools/trx/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: trx.c - $(CC_FOR_BUILD) $(FLAGS_FOR_BUILD) -o ${STAGING_HOST_DIR}/bin/trx trx.c diff --git a/target/tools/trx/trx.c b/target/tools/trx/trx.c deleted file mode 100644 index 9e4d521ca..000000000 --- a/target/tools/trx/trx.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> - * Copyright (C) 2005 Konstantin A. Klubnichkin and Oleg I. Vdovikin - * Copyright (C) 2006 OpenWrt developers <openwrt-developers@openwrt.org> - * Copyright (C) 2011 Waldemar Brodkorb <wbx@openadk.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#include <stdio.h> -#include <stdlib.h> -#include <stddef.h> -#include <stdint.h> -#include <string.h> -#include <errno.h> -#include <unistd.h> - -uint32_t crc32buf(char *buf, size_t len); - -/**********************************************************************/ -/* from trxhdr.h */ - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_VERSION 1 -#define TRX_MAX_LEN 0x697800 -#define TRX_NO_HEADER 1 /* Do not write TRX header */ - -struct trx_header { - uint32_t magic; /* "HDR0" */ - uint32_t len; /* Length of file including header */ - uint32_t crc32; /* 32-bit CRC from flag_version to end of file */ - uint32_t flag_version; /* 0:15 flags, 16:31 version */ - uint32_t offsets[3]; /* Offsets of partitions from start of header */ -}; - -/**********************************************************************/ - -void usage(void) __attribute__ (( __noreturn__ )); - -void usage(void) -{ - fprintf(stderr, "Usage: trx [-p product_id] [-v version] [-o outfile] [-m maxlen] [-a align] [-b offset] -f file [-f file [-f file]]\n"); - exit(EXIT_FAILURE); -} - -int main(int argc, char **argv) -{ - FILE *out = stdout; - FILE *in; - char *ofn = NULL; - char *buf; - char *e; - int c, i; - size_t n; - uint32_t cur_len; - unsigned long maxlen = TRX_MAX_LEN; - struct trx_header *p; - - struct { - uint8_t version[4]; /* Firmware version */ - uint8_t prod_id[12]; /* Product Id */ - uint8_t comp_hw[4][4]; /* Compatible hw list maj-min min/maj-min max */ - uint8_t pad[32]; /* Padding */ - } asus = { - .version = { 1, 9, 2, 7 }, /* version is set to 1.9.2.7 by default */ - .comp_hw[0] = { 0, 2, 2, 99 } /* hardcoded hw compat list 0.02 - 2.99 */ - }; - - - if (!(buf = malloc(maxlen))) { - fprintf(stderr, "malloc failed\n"); - return EXIT_FAILURE; - } - - p = (struct trx_header *) buf; - - p->magic = TRX_MAGIC; - cur_len = sizeof(struct trx_header); - p->flag_version = (TRX_VERSION << 16); - - in = NULL; - i = 0; - - while ((c = getopt(argc, argv, "-:o:p:v:m:a:b:f:")) != -1) { - switch (c) { - case 'f': - p->offsets[i++] = cur_len; - - if (!(in = fopen(optarg, "r"))) { - fprintf(stderr, "can not open \"%s\" for reading\n", optarg); - usage(); - } - n = fread(buf + cur_len, 1, maxlen - cur_len, in); - if (!feof(in)) { - fprintf(stderr, "fread failure or file \"%s\" too large\n",optarg); - fclose(in); - return EXIT_FAILURE; - } - fclose(in); -#undef ROUND -#define ROUND 4 - if (n & (ROUND-1)) { - memset(buf + cur_len + n, 0, ROUND - (n & (ROUND-1))); - n += ROUND - (n & (ROUND-1)); - } - cur_len += n; - /* reserve space for asus footer */ - if (asus.prod_id[0]) { - cur_len += sizeof(asus); - } - break; - case 'o': - ofn = optarg; - if (ofn && !(out = fopen(ofn, "w"))) { - fprintf(stderr, "can not open \"%s\" for writing\n", ofn); - usage(); - } - - break; - case 'm': - errno = 0; - maxlen = strtoul(optarg, &e, 0); - if (errno || (e == optarg) || *e) { - fprintf(stderr, "illegal numeric string\n"); - usage(); - } -#undef ROUND -#define ROUND 0x1000 - if (maxlen & (ROUND-1)) { - maxlen += (ROUND - (maxlen & (ROUND-1))); - } - if (maxlen < ROUND) { - fprintf(stderr, "maxlen too small (or wrapped)\n"); - usage(); - } - if (maxlen > TRX_MAX_LEN) { - fprintf(stderr, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n"); - } - if (!(buf = realloc(buf,maxlen))) { - fprintf(stderr, "realloc failed"); - return EXIT_FAILURE; - } - break; - case 'a': - errno = 0; - n = strtoul(optarg, &e, 0); - if (errno || (e == optarg) || *e) { - fprintf(stderr, "illegal numeric string\n"); - usage(); - } - if (cur_len & (n-1)) { - n = n - (cur_len & (n-1)); - memset(buf + cur_len, 0, n); - cur_len += n; - } - break; - case 'b': - errno = 0; - n = strtoul(optarg, &e, 0); - if (errno || (e == optarg) || *e) { - fprintf(stderr, "illegal numeric string\n"); - usage(); - } - if (n < cur_len) { - fprintf(stderr, "WARNING: current length exceeds -b %d offset\n",(int)n); - } else { - memset(buf + cur_len, 0, n - cur_len); - cur_len = n; - } - break; - case 'p': - if ((n = strlen(optarg)) > sizeof(asus.prod_id)) { - fprintf(stderr, "product id too long\n"); - usage(); - } - memset(asus.prod_id, ' ', sizeof(asus.prod_id)); - memcpy(asus.prod_id, optarg, n); - break; - case 'v': - for (n = 0; n < sizeof(asus.version) / sizeof(asus.version[0]); n++) - { - if (n != 0 && optarg[0] == '.' && optarg[1]) optarg++; - else if (n != 0) break; - - asus.version[n] = strtoul(optarg, &optarg, 10); - } - if (*optarg) - { - fprintf(stderr, "invalid version string\n"); - usage(); - } - break; - default: - usage(); - } - } - - if (!in) { - fprintf(stderr, "we require at least one filename\n"); - usage(); - } - -#undef ROUND -#define ROUND 0x1000 - n = cur_len & (ROUND-1); - if (n) { - memset(buf + cur_len, 0, ROUND - n); - cur_len += ROUND - n; - } - /* add asus footer */ - if (asus.prod_id[0]) { - memcpy(buf + cur_len - sizeof(asus), &asus, sizeof(asus)); - } - - p->crc32 = crc32buf((char *) &p->flag_version, - cur_len - offsetof(struct trx_header, flag_version)); - p->crc32 = p->crc32; - - p->len = cur_len; - - if (!fwrite(buf, cur_len, 1, out) || fflush(out)) { - fprintf(stderr, "fwrite failed\n"); - return EXIT_FAILURE; - } - - fclose(out); - - return EXIT_SUCCESS; -} - -/**********************************************************************/ -/* The following was grabbed and tweaked from the old snippets collection - * of public domain C code. */ - -/**********************************************************************\ -|* Demonstration program to compute the 32-bit CRC used as the frame *| -|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *| -|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *| -|* protocol). The 32-bit FCS was added via the Federal Register, *| -|* 1 June 1982, p.23798. I presume but don't know for certain that *| -|* this polynomial is or will be included in CCITT V.41, which *| -|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *| -|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *| -|* errors by a factor of 10^-5 over 16-bit FCS. *| -\**********************************************************************/ - -/* Copyright (C) 1986 Gary S. Brown. You may use this program, or - code or tables extracted from it, as desired without restriction.*/ - -/* First, the polynomial itself and its table of feedback terms. The */ -/* polynomial is */ -/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */ -/* Note that we take it "backwards" and put the highest-order term in */ -/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */ -/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */ -/* the MSB being 1. */ - -/* Note that the usual hardware shift register implementation, which */ -/* is what we're using (we're merely optimizing it by doing eight-bit */ -/* chunks at a time) shifts bits into the lowest-order term. In our */ -/* implementation, that means shifting towards the right. Why do we */ -/* do it this way? Because the calculated CRC must be transmitted in */ -/* order from highest-order term to lowest-order term. UARTs transmit */ -/* characters in order from LSB to MSB. By storing the CRC this way, */ -/* we hand it to the UART in the order low-byte to high-byte; the UART */ -/* sends each low-bit to hight-bit; and the result is transmission bit */ -/* by bit from highest- to lowest-order term without requiring any bit */ -/* shuffling on our part. Reception works similarly. */ - -/* The feedback terms table consists of 256, 32-bit entries. Notes: */ -/* */ -/* 1. The table can be generated at runtime if desired; code to do so */ -/* is shown later. It might not be obvious, but the feedback */ -/* terms simply represent the results of eight shift/xor opera- */ -/* tions for all combinations of data and CRC register values. */ -/* */ -/* 2. The CRC accumulation logic is the same for all CRC polynomials, */ -/* be they sixteen or thirty-two bits wide. You simply choose the */ -/* appropriate table. Alternatively, because the table can be */ -/* generated at runtime, you can start by generating the table for */ -/* the polynomial in question and use exactly the same "updcrc", */ -/* if your application needn't simultaneously handle two CRC */ -/* polynomials. (Note, however, that XMODEM is strange.) */ -/* */ -/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */ -/* of course, 32-bit entries work OK if the high 16 bits are zero. */ -/* */ -/* 4. The values must be right-shifted by eight bits by the "updcrc" */ -/* logic; the shift must be unsigned (bring in zeroes). On some */ -/* hardware you could probably optimize the shift in assembler by */ -/* using byte-swap instructions. */ - -static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */ -0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, -0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, -0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2, -0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, -0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, -0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, -0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c, -0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, -0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, -0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, -0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106, -0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, -0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, -0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, -0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950, -0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, -0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, -0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, -0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, -0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, -0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, -0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, -0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84, -0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, -0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, -0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, -0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e, -0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, -0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, -0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, -0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28, -0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, -0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, -0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, -0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242, -0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, -0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, -0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, -0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, -0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, -0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, -0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, -0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d -}; - -#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8)) - -uint32_t crc32buf(char *buf, size_t len) -{ - uint32_t crc; - - crc = 0xFFFFFFFF; - - for ( ; len; --len, ++buf) - { - crc = UPDC32(*buf, crc); - } - - return crc; -} diff --git a/target/tools/xz/Makefile b/target/tools/xz/Makefile deleted file mode 100644 index 6cefbb476..000000000 --- a/target/tools/xz/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk - -PKG_NAME:= xz -PKG_VERSION:= 5.0.5 -PKG_RELEASE:= 1 -PKG_MD5SUM:= 1b7a781fb4cf8938842279bd3e8ee852 -PKG_SITES:= http://tukaani.org/xz/ - -include ../rules.mk - -all: $(WRKBUILD)/.installed - -$(WRKBUILD)/.configured: ${WRKDIST}/.prepared - (cd ${WRKBUILD}; ./configure --prefix=$(STAGING_HOST_DIR)/usr) - touch $@ - -$(WRKBUILD)/.compiled: $(WRKBUILD)/.configured - ${MAKE} -C ${WRKBUILD} - touch $@ - -$(WRKBUILD)/.installed: $(WRKBUILD)/.compiled - ${MAKE} -C ${WRKBUILD} install - touch $@ - -include $(TOPDIR)/mk/tools.mk |