diff options
Diffstat (limited to 'target/tools/trx/trx.c')
| -rw-r--r-- | target/tools/trx/trx.c | 366 |
1 files changed, 0 insertions, 366 deletions
diff --git a/target/tools/trx/trx.c b/target/tools/trx/trx.c deleted file mode 100644 index 9e4d521ca..000000000 --- a/target/tools/trx/trx.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> - * Copyright (C) 2005 Konstantin A. Klubnichkin and Oleg I. Vdovikin - * Copyright (C) 2006 OpenWrt developers <openwrt-developers@openwrt.org> - * Copyright (C) 2011 Waldemar Brodkorb <wbx@openadk.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#include <stdio.h> -#include <stdlib.h> -#include <stddef.h> -#include <stdint.h> -#include <string.h> -#include <errno.h> -#include <unistd.h> - -uint32_t crc32buf(char *buf, size_t len); - -/**********************************************************************/ -/* from trxhdr.h */ - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_VERSION 1 -#define TRX_MAX_LEN 0x697800 -#define TRX_NO_HEADER 1 /* Do not write TRX header */ - -struct trx_header { - uint32_t magic; /* "HDR0" */ - uint32_t len; /* Length of file including header */ - uint32_t crc32; /* 32-bit CRC from flag_version to end of file */ - uint32_t flag_version; /* 0:15 flags, 16:31 version */ - uint32_t offsets[3]; /* Offsets of partitions from start of header */ -}; - -/**********************************************************************/ - -void usage(void) __attribute__ (( __noreturn__ )); - -void usage(void) -{ - fprintf(stderr, "Usage: trx [-p product_id] [-v version] [-o outfile] [-m maxlen] [-a align] [-b offset] -f file [-f file [-f file]]\n"); - exit(EXIT_FAILURE); -} - -int main(int argc, char **argv) -{ - FILE *out = stdout; - FILE *in; - char *ofn = NULL; - char *buf; - char *e; - int c, i; - size_t n; - uint32_t cur_len; - unsigned long maxlen = TRX_MAX_LEN; - struct trx_header *p; - - struct { - uint8_t version[4]; /* Firmware version */ - uint8_t prod_id[12]; /* Product Id */ - uint8_t comp_hw[4][4]; /* Compatible hw list maj-min min/maj-min max */ - uint8_t pad[32]; /* Padding */ - } asus = { - .version = { 1, 9, 2, 7 }, /* version is set to 1.9.2.7 by default */ - .comp_hw[0] = { 0, 2, 2, 99 } /* hardcoded hw compat list 0.02 - 2.99 */ - }; - - - if (!(buf = malloc(maxlen))) { - fprintf(stderr, "malloc failed\n"); - return EXIT_FAILURE; - } - - p = (struct trx_header *) buf; - - p->magic = TRX_MAGIC; - cur_len = sizeof(struct trx_header); - p->flag_version = (TRX_VERSION << 16); - - in = NULL; - i = 0; - - while ((c = getopt(argc, argv, "-:o:p:v:m:a:b:f:")) != -1) { - switch (c) { - case 'f': - p->offsets[i++] = cur_len; - - if (!(in = fopen(optarg, "r"))) { - fprintf(stderr, "can not open \"%s\" for reading\n", optarg); - usage(); - } - n = fread(buf + cur_len, 1, maxlen - cur_len, in); - if (!feof(in)) { - fprintf(stderr, "fread failure or file \"%s\" too large\n",optarg); - fclose(in); - return EXIT_FAILURE; - } - fclose(in); -#undef ROUND -#define ROUND 4 - if (n & (ROUND-1)) { - memset(buf + cur_len + n, 0, ROUND - (n & (ROUND-1))); - n += ROUND - (n & (ROUND-1)); - } - cur_len += n; - /* reserve space for asus footer */ - if (asus.prod_id[0]) { - cur_len += sizeof(asus); - } - break; - case 'o': - ofn = optarg; - if (ofn && !(out = fopen(ofn, "w"))) { - fprintf(stderr, "can not open \"%s\" for writing\n", ofn); - usage(); - } - - break; - case 'm': - errno = 0; - maxlen = strtoul(optarg, &e, 0); - if (errno || (e == optarg) || *e) { - fprintf(stderr, "illegal numeric string\n"); - usage(); - } -#undef ROUND -#define ROUND 0x1000 - if (maxlen & (ROUND-1)) { - maxlen += (ROUND - (maxlen & (ROUND-1))); - } - if (maxlen < ROUND) { - fprintf(stderr, "maxlen too small (or wrapped)\n"); - usage(); - } - if (maxlen > TRX_MAX_LEN) { - fprintf(stderr, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n"); - } - if (!(buf = realloc(buf,maxlen))) { - fprintf(stderr, "realloc failed"); - return EXIT_FAILURE; - } - break; - case 'a': - errno = 0; - n = strtoul(optarg, &e, 0); - if (errno || (e == optarg) || *e) { - fprintf(stderr, "illegal numeric string\n"); - usage(); - } - if (cur_len & (n-1)) { - n = n - (cur_len & (n-1)); - memset(buf + cur_len, 0, n); - cur_len += n; - } - break; - case 'b': - errno = 0; - n = strtoul(optarg, &e, 0); - if (errno || (e == optarg) || *e) { - fprintf(stderr, "illegal numeric string\n"); - usage(); - } - if (n < cur_len) { - fprintf(stderr, "WARNING: current length exceeds -b %d offset\n",(int)n); - } else { - memset(buf + cur_len, 0, n - cur_len); - cur_len = n; - } - break; - case 'p': - if ((n = strlen(optarg)) > sizeof(asus.prod_id)) { - fprintf(stderr, "product id too long\n"); - usage(); - } - memset(asus.prod_id, ' ', sizeof(asus.prod_id)); - memcpy(asus.prod_id, optarg, n); - break; - case 'v': - for (n = 0; n < sizeof(asus.version) / sizeof(asus.version[0]); n++) - { - if (n != 0 && optarg[0] == '.' && optarg[1]) optarg++; - else if (n != 0) break; - - asus.version[n] = strtoul(optarg, &optarg, 10); - } - if (*optarg) - { - fprintf(stderr, "invalid version string\n"); - usage(); - } - break; - default: - usage(); - } - } - - if (!in) { - fprintf(stderr, "we require at least one filename\n"); - usage(); - } - -#undef ROUND -#define ROUND 0x1000 - n = cur_len & (ROUND-1); - if (n) { - memset(buf + cur_len, 0, ROUND - n); - cur_len += ROUND - n; - } - /* add asus footer */ - if (asus.prod_id[0]) { - memcpy(buf + cur_len - sizeof(asus), &asus, sizeof(asus)); - } - - p->crc32 = crc32buf((char *) &p->flag_version, - cur_len - offsetof(struct trx_header, flag_version)); - p->crc32 = p->crc32; - - p->len = cur_len; - - if (!fwrite(buf, cur_len, 1, out) || fflush(out)) { - fprintf(stderr, "fwrite failed\n"); - return EXIT_FAILURE; - } - - fclose(out); - - return EXIT_SUCCESS; -} - -/**********************************************************************/ -/* The following was grabbed and tweaked from the old snippets collection - * of public domain C code. */ - -/**********************************************************************\ -|* Demonstration program to compute the 32-bit CRC used as the frame *| -|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *| -|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *| -|* protocol). The 32-bit FCS was added via the Federal Register, *| -|* 1 June 1982, p.23798. I presume but don't know for certain that *| -|* this polynomial is or will be included in CCITT V.41, which *| -|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *| -|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *| -|* errors by a factor of 10^-5 over 16-bit FCS. *| -\**********************************************************************/ - -/* Copyright (C) 1986 Gary S. Brown. You may use this program, or - code or tables extracted from it, as desired without restriction.*/ - -/* First, the polynomial itself and its table of feedback terms. The */ -/* polynomial is */ -/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */ -/* Note that we take it "backwards" and put the highest-order term in */ -/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */ -/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */ -/* the MSB being 1. */ - -/* Note that the usual hardware shift register implementation, which */ -/* is what we're using (we're merely optimizing it by doing eight-bit */ -/* chunks at a time) shifts bits into the lowest-order term. In our */ -/* implementation, that means shifting towards the right. Why do we */ -/* do it this way? Because the calculated CRC must be transmitted in */ -/* order from highest-order term to lowest-order term. UARTs transmit */ -/* characters in order from LSB to MSB. By storing the CRC this way, */ -/* we hand it to the UART in the order low-byte to high-byte; the UART */ -/* sends each low-bit to hight-bit; and the result is transmission bit */ -/* by bit from highest- to lowest-order term without requiring any bit */ -/* shuffling on our part. Reception works similarly. */ - -/* The feedback terms table consists of 256, 32-bit entries. Notes: */ -/* */ -/* 1. The table can be generated at runtime if desired; code to do so */ -/* is shown later. It might not be obvious, but the feedback */ -/* terms simply represent the results of eight shift/xor opera- */ -/* tions for all combinations of data and CRC register values. */ -/* */ -/* 2. The CRC accumulation logic is the same for all CRC polynomials, */ -/* be they sixteen or thirty-two bits wide. You simply choose the */ -/* appropriate table. Alternatively, because the table can be */ -/* generated at runtime, you can start by generating the table for */ -/* the polynomial in question and use exactly the same "updcrc", */ -/* if your application needn't simultaneously handle two CRC */ -/* polynomials. (Note, however, that XMODEM is strange.) */ -/* */ -/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */ -/* of course, 32-bit entries work OK if the high 16 bits are zero. */ -/* */ -/* 4. The values must be right-shifted by eight bits by the "updcrc" */ -/* logic; the shift must be unsigned (bring in zeroes). On some */ -/* hardware you could probably optimize the shift in assembler by */ -/* using byte-swap instructions. */ - -static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */ -0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, -0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, -0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2, -0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, -0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, -0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, -0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c, -0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, -0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, -0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, -0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106, -0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, -0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, -0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, -0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950, -0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, -0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, -0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, -0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, -0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, -0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, -0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, -0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84, -0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, -0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, -0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, -0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e, -0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, -0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, -0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, -0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28, -0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, -0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, -0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, -0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242, -0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, -0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, -0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, -0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, -0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, -0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, -0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, -0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d -}; - -#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8)) - -uint32_t crc32buf(char *buf, size_t len) -{ - uint32_t crc; - - crc = 0xFFFFFFFF; - - for ( ; len; --len, ++buf) - { - crc = UPDC32(*buf, crc); - } - - return crc; -} |