diff options
Diffstat (limited to 'target/microblaze')
| -rw-r--r-- | target/microblaze/Makefile | 14 | ||||
| -rw-r--r-- | target/microblaze/kernel/qemu-microblaze-ml605 | 1 | ||||
| -rw-r--r-- | target/microblaze/kernel/qemu-microblaze-s3adsp1800 | 1 | ||||
| -rw-r--r-- | target/microblaze/s3adsp1800.dtb | bin | 0 -> 8369 bytes | |||
| -rw-r--r-- | target/microblaze/s3adsp1800.dts | 287 | ||||
| -rw-r--r-- | target/microblaze/sys-available/qemu-microblaze | 2 | ||||
| -rw-r--r-- | target/microblaze/sys-available/qemu-microblazeel | 4 | ||||
| -rw-r--r-- | target/microblaze/target.mk | 1 |
8 files changed, 300 insertions, 10 deletions
diff --git a/target/microblaze/Makefile b/target/microblaze/Makefile index 5ab2345e7..58d02c5be 100644 --- a/target/microblaze/Makefile +++ b/target/microblaze/Makefile @@ -10,12 +10,10 @@ include $(TOPDIR)/mk/image.mk KERNEL:=$(LINUX_DIR)/arch/microblaze/boot/$(ADK_TARGET_KERNEL) ifeq ($(ADK_TARGET_QEMU_MICROBLAZE_MODEL_ML605),y) -MODEL:=petalogix-ml605 -DTB:=-dtb target/microblaze/ml605.dtb +QEMU_ARGS+=-M petalogix-ml605 -dtb target/microblaze/ml605.dtb endif ifeq ($(ADK_TARGET_QEMU_MICROBLAZE_MODEL_S3ADSP1800),y) -MODEL:=petalogix-s3adsp1800 -DTB:= +QEMU_ARGS+=-M petalogix-s3adsp1800 endif ifeq ($(ADK_TARGET_FS),squashfs) @@ -25,7 +23,7 @@ imageinstall: $(BUILD_DIR)/root.squashfs @cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL) ifneq ($(ADK_HARDWARE_QEMU),) @echo "Start qemu with following options:" - @echo 'qemu-system-${CPU_ARCH} -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -pflash $(FW_DIR)/$(ROOTFSSQUASHFS) $(DTB)' + @echo 'qemu-system-${CPU_ARCH} $(QEMU_ARGS) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -pflash $(FW_DIR)/$(ROOTFSSQUASHFS)' endif endif ifeq ($(ADK_TARGET_FS),jffs2) @@ -33,7 +31,7 @@ imageinstall: $(FW_DIR)/$(ROOTFSJFFS2) @cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL) ifneq ($(ADK_HARDWARE_QEMU),) @echo "Start qemu with following options:" - @echo 'qemu-system-${CPU_ARCH} -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -pflash $(FW_DIR)/$(ROOTFSJFFS2) $(DTB)' + @echo 'qemu-system-${CPU_ARCH} $(QEMU_ARGS) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -pflash $(FW_DIR)/$(ROOTFSJFFS2)' endif endif ifeq ($(ADK_TARGET_FS),initramfs) @@ -43,7 +41,7 @@ imageinstall: $(FW_DIR)/$(INITRAMFS) @echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}' ifneq ($(ADK_HARDWARE_QEMU),) @echo "Start qemu with following command line:" - @echo 'qemu-system-${CPU_ARCH} -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS} $(DTB)' + @echo 'qemu-system-${CPU_ARCH} $(QEMU_ARGS) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}' endif endif ifeq ($(ADK_TARGET_FS),initramfs-piggyback) @@ -52,7 +50,7 @@ imageinstall: createinitramfs @echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}' ifneq ($(ADK_HARDWARE_QEMU),) @echo "Start qemu with following command line:" - @echo 'qemu-system-${CPU_ARCH} -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) $(DTB)' + @echo 'qemu-system-${CPU_ARCH} $(QEMU_ARGS) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)' endif endif ifeq ($(ADK_TARGET_FS),archive) diff --git a/target/microblaze/kernel/qemu-microblaze-ml605 b/target/microblaze/kernel/qemu-microblaze-ml605 index 8d13c5ddd..cb8da0cec 100644 --- a/target/microblaze/kernel/qemu-microblaze-ml605 +++ b/target/microblaze/kernel/qemu-microblaze-ml605 @@ -22,3 +22,4 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_CMDLINE_FORCE=y diff --git a/target/microblaze/kernel/qemu-microblaze-s3adsp1800 b/target/microblaze/kernel/qemu-microblaze-s3adsp1800 index fc43ab5f1..3c3546b47 100644 --- a/target/microblaze/kernel/qemu-microblaze-s3adsp1800 +++ b/target/microblaze/kernel/qemu-microblaze-s3adsp1800 @@ -19,3 +19,4 @@ CONFIG_NET_VENDOR_XILINX=y CONFIG_XILINX_EMACLITE=y CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_CMDLINE_FORCE=y diff --git a/target/microblaze/s3adsp1800.dtb b/target/microblaze/s3adsp1800.dtb Binary files differnew file mode 100644 index 000000000..163f1632d --- /dev/null +++ b/target/microblaze/s3adsp1800.dtb diff --git a/target/microblaze/s3adsp1800.dts b/target/microblaze/s3adsp1800.dts new file mode 100644 index 000000000..9cc6bdc13 --- /dev/null +++ b/target/microblaze/s3adsp1800.dts @@ -0,0 +1,287 @@ +/dts-v1/; + +/ { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "xlnx,microblaze"; + model = "testing"; + + memory@90000000 { + device_type = "memory"; + reg = <0x90000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyUL0,115200"; + linux,stdout-path = "/plb@0/serial@84000000"; + }; + + cpus { + #address-cells = <0x1>; + #cpus = <0x1>; + #size-cells = <0x0>; + + cpu@0 { + clock-frequency = <0x3b9aca0>; + compatible = "xlnx,microblaze-7.10.d"; + d-cache-baseaddr = <0x90000000>; + d-cache-highaddr = <0x97ffffff>; + d-cache-line-size = <0x10>; + d-cache-size = <0x800>; + device_type = "cpu"; + i-cache-baseaddr = <0x90000000>; + i-cache-highaddr = <0x97ffffff>; + i-cache-line-size = <0x10>; + i-cache-size = <0x800>; + model = "microblaze,7.10.d"; + reg = <0x0>; + timebase-frequency = <0x3b9aca0>; + xlnx,addr-tag-bits = <0x10>; + xlnx,allow-dcache-wr = <0x1>; + xlnx,allow-icache-wr = <0x1>; + xlnx,area-optimized = <0x0>; + xlnx,cache-byte-size = <0x800>; + xlnx,d-lmb = <0x1>; + xlnx,d-opb = <0x0>; + xlnx,d-plb = <0x1>; + xlnx,data-size = <0x20>; + xlnx,dcache-addr-tag = <0x10>; + xlnx,dcache-always-used = <0x0>; + xlnx,dcache-byte-size = <0x800>; + xlnx,dcache-line-len = <0x4>; + xlnx,dcache-use-fsl = <0x1>; + xlnx,debug-enabled = <0x1>; + xlnx,div-zero-exception = <0x0>; + xlnx,dopb-bus-exception = <0x0>; + xlnx,dynamic-bus-sizing = <0x1>; + xlnx,edge-is-positive = <0x1>; + xlnx,family = "spartan3adsp"; + xlnx,fpu-exception = <0x0>; + xlnx,fsl-data-size = <0x20>; + xlnx,fsl-exception = <0x0>; + xlnx,fsl-links = <0x0>; + xlnx,i-lmb = <0x1>; + xlnx,i-opb = <0x0>; + xlnx,i-plb = <0x1>; + xlnx,icache-always-used = <0x0>; + xlnx,icache-line-len = <0x4>; + xlnx,icache-use-fsl = <0x1>; + xlnx,ill-opcode-exception = <0x0>; + xlnx,instance = "microblaze_0"; + xlnx,interconnect = <0x1>; + xlnx,interrupt-is-edge = <0x0>; + xlnx,iopb-bus-exception = <0x0>; + xlnx,mmu-dtlb-size = <0x4>; + xlnx,mmu-itlb-size = <0x2>; + xlnx,mmu-tlb-access = <0x3>; + xlnx,mmu-zones = <0x10>; + xlnx,number-of-pc-brk = <0x3>; + xlnx,number-of-rd-addr-brk = <0x2>; + xlnx,number-of-wr-addr-brk = <0x2>; + xlnx,opcode-0x0-illegal = <0x0>; + xlnx,pvr = <0x1>; + xlnx,pvr-user1 = <0x0>; + xlnx,pvr-user2 = <0x0>; + xlnx,reset-msr = <0x0>; + xlnx,sco = <0x0>; + xlnx,unaligned-exceptions = <0x1>; + xlnx,use-barrel = <0x1>; + xlnx,use-dcache = <0x1>; + xlnx,use-div = <0x0>; + xlnx,use-ext-brk = <0x1>; + xlnx,use-ext-nm-brk = <0x1>; + xlnx,use-extended-fsl-instr = <0x0>; + xlnx,use-fpu = <0x0>; + xlnx,use-hw-mul = <0x1>; + xlnx,use-icache = <0x1>; + xlnx,use-interrupt = <0x1>; + xlnx,use-mmu = <0x3>; + xlnx,use-msr-instr = <0x1>; + xlnx,use-pcmp-instr = <0x1>; + }; + }; + + plb@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; + ranges; + + ethernet@81000000 { + compatible = "xlnx,xps-ethernetlite-2.00.b"; + device_type = "network"; + interrupt-parent = <0x1>; + interrupts = <0x1 0x0>; + local-mac-address = [02 00 00 00 00 00]; + reg = <0x81000000 0x10000>; + xlnx,duplex = <0x1>; + xlnx,family = "spartan3adsp"; + xlnx,rx-ping-pong = <0x0>; + xlnx,tx-ping-pong = <0x0>; + }; + + flash@a0000000 { + #address-cells = <1>; + #size-cells = <1>; + bank-width = <0x1>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = <0xa0000000 0x1000000>; + xlnx,family = "spartan3adsp"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x8>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x3e80>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x8>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x0>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x11170>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x11170>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x61a8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x61a8>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x1388>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x11170>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0xafc8>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + partition@0x00000000 { + label = "rootfs"; + reg = <0x00000000 0x01000000>; + }; + }; + + gpio@81400000 { + compatible = "xlnx,xps-gpio-1.00.a"; + interrupt-parent = <0x1>; + interrupts = <0x2 0x2>; + reg = <0x81400000 0x10000>; + xlnx,all-inputs = <0x0>; + xlnx,all-inputs-2 = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,dout-default-2 = <0x0>; + xlnx,family = "spartan3adsp"; + xlnx,gpio-width = <0x8>; + xlnx,interrupt-present = <0x1>; + xlnx,is-bidir = <0x0>; + xlnx,is-bidir-2 = <0x1>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + }; + + serial@84000000 { + clock-frequency = <0x3b9aca0>; + compatible = "xlnx,xps-uartlite-1.00.a"; + current-speed = <0x1c200>; + device_type = "serial"; + interrupt-parent = <0x1>; + interrupts = <0x3 0x0>; + port-number = <0x0>; + reg = <0x84000000 0x10000>; + xlnx,baudrate = <0x1c200>; + xlnx,data-bits = <0x8>; + xlnx,family = "spartan3adsp"; + xlnx,odd-parity = <0x0>; + xlnx,use-parity = <0x0>; + }; + + debug@84400000 { + compatible = "xlnx,mdm-1.00.d"; + reg = <0x84400000 0x10000>; + xlnx,family = "spartan3adsp"; + xlnx,interconnect = <0x1>; + xlnx,jtag-chain = <0x2>; + xlnx,mb-dbg-ports = <0x1>; + xlnx,uart-width = <0x8>; + xlnx,use-uart = <0x1>; + xlnx,write-fsl-ports = <0x0>; + }; + + mpmc@90000000 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "xlnx,mpmc-4.03.a"; + }; + + interrupt-controller@81800000 { + #interrupt-cells = <0x2>; + compatible = "xlnx,xps-intc-1.00.a"; + interrupt-controller; + reg = <0x81800000 0x10000>; + xlnx,kind-of-intr = <0xa>; + xlnx,num-intr-inputs = <0x4>; + linux,phandle = <0x1>; + }; + + timer@83c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + interrupt-parent = <0x1>; + interrupts = <0x0 0x2>; + reg = <0x83c00000 0x10000>; + xlnx,count-width = <0x20>; + xlnx,family = "spartan3adsp"; + xlnx,gen0-assert = <0x1>; + xlnx,gen1-assert = <0x1>; + xlnx,one-timer-only = <0x0>; + xlnx,trig0-assert = <0x1>; + xlnx,trig1-assert = <0x1>; + }; + }; +}; diff --git a/target/microblaze/sys-available/qemu-microblaze b/target/microblaze/sys-available/qemu-microblaze index 63214e39b..a5bdb65e8 100644 --- a/target/microblaze/sys-available/qemu-microblaze +++ b/target/microblaze/sys-available/qemu-microblaze @@ -4,7 +4,9 @@ config ADK_TARGET_SYSTEM_QEMU_MICROBLAZE select ADK_big select ADK_qemu_microblaze select ADK_HARDWARE_QEMU + select ADK_TARGET_WITH_MTD select ADK_TARGET_KERNEL_LINUXBIN + select ADK_HOST_NEED_MKIMAGE help Qemu support for microblaze big endian architecture. diff --git a/target/microblaze/sys-available/qemu-microblazeel b/target/microblaze/sys-available/qemu-microblazeel index a58083770..4d752a942 100644 --- a/target/microblaze/sys-available/qemu-microblazeel +++ b/target/microblaze/sys-available/qemu-microblazeel @@ -1,10 +1,12 @@ config ADK_TARGET_SYSTEM_QEMU_MICROBLAZEEL bool "Qemu Emulator (little endian)" - select ADK_microblazeel + select ADK_microblaze select ADK_qemu_microblazeel select ADK_little select ADK_HARDWARE_QEMU + select ADK_TARGET_WITH_MTD select ADK_TARGET_KERNEL_LINUXBIN + select ADK_HOST_NEED_MKIMAGE help Qemu support for microblaze little endian architecture. diff --git a/target/microblaze/target.mk b/target/microblaze/target.mk index bee74e465..c179123f9 100644 --- a/target/microblaze/target.mk +++ b/target/microblaze/target.mk @@ -1,5 +1,4 @@ include $(TOPDIR)/mk/kernel-ver.mk ARCH:= microblaze CPU_ARCH:= $(ADK_TARGET_CPU_ARCH) -TARGET_OPTIMIZATION:= -Os -pipe TARGET_CFLAGS_ARCH:= $(ADK_TARGET_CFLAGS) |