diff options
Diffstat (limited to 'target/linux/patches/2.6.36/zboot-brcm-reloc.patch')
-rw-r--r-- | target/linux/patches/2.6.36/zboot-brcm-reloc.patch | 297 |
1 files changed, 0 insertions, 297 deletions
diff --git a/target/linux/patches/2.6.36/zboot-brcm-reloc.patch b/target/linux/patches/2.6.36/zboot-brcm-reloc.patch deleted file mode 100644 index 62de01b36..000000000 --- a/target/linux/patches/2.6.36/zboot-brcm-reloc.patch +++ /dev/null @@ -1,297 +0,0 @@ ---- /dev/null Thu Jan 6 02:10:11 2011 -+++ linux-2.6.36/arch/mips/boot/compressed/invcache.S Thu Jan 6 01:32:57 2011 -@@ -0,0 +1,132 @@ -+/*- -+ * written 2011 by Thorsten Glaser <tg@mirbsd.org> based on -+ * code from LZMA-Loader with the following copyright note: -+ * Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su> -+ * cache manipulation adapted from Broadcom code -+ * idea taken from original bunzip2 decompressor code -+ * Copyright 2004 Manuel Novoa III <mjn3@codepoet.org> -+ */ -+ -+/* -+ * This file is supposed to be #include’d where it’s -+ * needed; we will not trash s0, s1, s2, s3. -+ */ -+ -+#define KSEG0 0x80000000 -+ -+#define C0_CONFIG $16 -+#define C0_TAGLO $28 -+#define C0_TAGHI $29 -+ -+#define CONF1_DA_SHIFT 7 /* D$ associativity */ -+#define CONF1_DA_MASK 0x00000380 -+#define CONF1_DA_BASE 1 -+#define CONF1_DL_SHIFT 10 /* D$ line size */ -+#define CONF1_DL_MASK 0x00001c00 -+#define CONF1_DL_BASE 2 -+#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -+#define CONF1_DS_MASK 0x0000e000 -+#define CONF1_DS_BASE 64 -+#define CONF1_IA_SHIFT 16 /* I$ associativity */ -+#define CONF1_IA_MASK 0x00070000 -+#define CONF1_IA_BASE 1 -+#define CONF1_IL_SHIFT 19 /* I$ line size */ -+#define CONF1_IL_MASK 0x00380000 -+#define CONF1_IL_BASE 2 -+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -+#define CONF1_IS_MASK 0x01c00000 -+#define CONF1_IS_BASE 64 -+ -+#define Index_Invalidate_I 0x00 -+#define Index_Writeback_Inv_D 0x01 -+ -+ /* Get cache sizes */ -+ .set mips32 -+ mfc0 s4,C0_CONFIG,1 -+ .set mips0 -+ -+ li s5,CONF1_DL_MASK -+ and s5,s4 -+ beq s5,zero,2f -+ nop -+ -+ srl s5,CONF1_DL_SHIFT -+ li t0,CONF1_DL_BASE -+ sll s5,t0,s5 /* s5 has D$ cache line size */ -+ -+ li s6,CONF1_DA_MASK -+ and s6,s4 -+ srl s6,CONF1_DA_SHIFT -+ addiu s6,CONF1_DA_BASE /* s6 now has D$ associativity */ -+ -+ li t0,CONF1_DS_MASK -+ and t0,s4 -+ srl t0,CONF1_DS_SHIFT -+ li s7,CONF1_DS_BASE -+ sll s7,s7,t0 /* s7 has D$ sets per way */ -+ -+ multu s6,s7 /* sets/way * associativity */ -+ mflo t0 /* total cache lines */ -+ -+ multu s5,t0 /* D$ linesize * lines */ -+ mflo s6 /* s6 is now D$ size in bytes */ -+ -+ /* Initilize the D$: */ -+ mtc0 zero,C0_TAGLO -+ mtc0 zero,C0_TAGHI -+ -+ li t0,KSEG0 /* Just an address for the first $ line */ -+ addu t1,t0,s6 /* + size of cache == end */ -+ -+ .set mips3 -+1: cache Index_Writeback_Inv_D,0(t0) -+ .set mips0 -+ bne t0,t1,1b -+ addu t0,s5 -+ -+2: -+ /* Now we get to do it all again for the I$ */ -+ -+ move s7,zero /* just in case there is no icache */ -+ move t8,zero -+ -+ li t0,CONF1_IL_MASK -+ and t0,s4 -+ beq t0,zero,3f -+ nop -+ -+ srl t0,CONF1_IL_SHIFT -+ li s7,CONF1_IL_BASE -+ sll s7,t0 /* s7 has I$ cache line size */ -+ -+ li t0,CONF1_IA_MASK -+ and t0,s4 -+ srl t0,CONF1_IA_SHIFT -+ addiu t8,t0,CONF1_IA_BASE /* t8 now has I$ associativity */ -+ -+ li t0,CONF1_IS_MASK -+ and t0,s4 -+ srl t0,CONF1_IS_SHIFT -+ li t9,CONF1_IS_BASE -+ sll t9,t0 /* t9 has I$ sets per way */ -+ -+ multu t8,t9 /* sets/way * associativity */ -+ mflo t0 /* t8 is now total cache lines */ -+ -+ multu s7,t0 /* I$ linesize * lines */ -+ mflo t8 /* t8 is cache size in bytes */ -+ -+ /* Initilize the I$: */ -+ mtc0 zero,C0_TAGLO -+ mtc0 zero,C0_TAGHI -+ -+ li t0,KSEG0 /* Just an address for the first $ line */ -+ addu t1,t0,t8 /* + size of cache == end */ -+ -+ .set mips3 -+1: cache Index_Invalidate_I,0(t0) -+ .set mips0 -+ bne t0,t1,1b -+ addu t0,s7 -+ -+3: ---- /dev/null Thu Jan 6 00:14:18 2011 -+++ linux-2.6.36/arch/mips/boot/compressed/selfreloc.lds.S Wed Jan 5 23:52:43 2011 -@@ -0,0 +1,39 @@ -+/*- -+ * written 2010 by Thorsten Glaser <tg@debian.org> based on -+ * arch/mips/kernel/vmlinux.lds and arch/mips/boot/compressed/ld.script -+ */ -+ -+#include <asm/asm-offsets.h> -+#include <asm/page.h> -+#include <asm-generic/vmlinux.lds.h> -+ -+#undef mips -+#define mips mips -+OUTPUT_ARCH(mips) -+ENTRY(selfreloc_start) -+PHDRS { -+ text PT_LOAD FLAGS(7); /* RWX */ -+} -+SECTIONS -+{ -+ . = VMLINUX_LOAD_ADDRESS; -+ .text : { -+ *(.text) -+ *(.text.*) -+ *(.rodata) -+ *(.rodata.*) -+ *(.data) -+ *(.data.*) -+ *(.bss) -+ *(.bss.*) -+ } :text -+ /DISCARD/ : { -+ *(.MIPS.options) -+ *(.options) -+ *(.pdr) -+ *(.reginfo) -+ *(.comment) -+ *(.note) -+ *(.gnu.attributes) -+ } -+} ---- /dev/null Thu Jan 6 02:10:14 2011 -+++ linux-2.6.36/arch/mips/boot/compressed/selfreloc.S Thu Jan 6 01:21:44 2011 -@@ -0,0 +1,60 @@ -+/*- -+ * written 2011 by Thorsten Glaser <tg@freewrt.org> based on -+ * arch/mips/boot/compressed/head.S and code from LZMA-Loader -+ */ -+ -+#include <asm/asm.h> -+#include <asm/regdef.h> -+ -+ .set noreorder -+ .cprestore -+ -+ .text -+ LEAF(selfreloc_start) -+selfreloc_start: -+ /* Save boot rom start args */ -+ move s0, a0 -+ move s1, a1 -+ move s2, a2 -+ move s3, a3 -+ -+ /* Copy code to the correct place */ -+ PTR_LI a0, VMLINUZ_LOAD_ADDRESS -+ PTR_LA a1, imgbeg -+ PTR_LA a2, imgend -+1: lw t0, 0(a1) -+ sw t0, 0(a0) -+ add a1, 4 -+ add a0, 4 -+ blt a1, a2, 1b -+ nop -+ -+ /* -+ * At this point we need to invalidate dcache and -+ * icache before jumping to the new code -+ */ -+/* #include "invcache.S" // since this may work only on brcm? */ -+ -+ /* Restore boot rom start args */ -+ move a0, s0 -+ move a1, s1 -+ move a2, s2 -+ move a3, s3 -+ -+ /* Jump to the code at its new location */ -+ PTR_LI k0, VMLINUZ_LOAD_ADDRESS -+ jr k0 -+ nop -+ -+ /* Just in case we come back… */ -+3: -+ b 3b -+ nop -+ END(selfreloc_start) -+ -+ .globl imgbeg -+ .p2align 2 -+imgbeg: .incbin "vmlinuz.bin" -+ .globl imgend -+ .p2align 2 -+imgend: ---- linux-2.6.36/arch/mips/boot/compressed/Makefile~ Wed Jan 5 21:26:40 2011 -+++ linux-2.6.36/arch/mips/boot/compressed/Makefile Wed Jan 5 23:35:58 2011 -@@ -106,4 +107,12 @@ OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFL - vmlinuz.srec: vmlinuz - $(call cmd,objcopy) - --clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec} -+AFLAGS_selfreloc1.o := -DVMLINUZ_LOAD_ADDRESS=$(VMLINUZ_LOAD_ADDRESS) -+arch/mips/boot/compressed/selfreloc.o: arch/mips/boot/compressed/selfreloc.S vmlinuz.bin arch/mips/boot/compressed/invcache.S -+ -+CPPFLAGS_selfreloc.lds := $(KBUILD_CFLAGS) -+ -+vmlinub.elf: arch/mips/boot/compressed/selfreloc.oarch/mips/boot/compressed/selfreloc.lds -+ $(LD) $(LDFLAGS) -T arch/mips/boot/compressed/selfreloc.lds arch/mips/boot/compressed/selfreloc.o -o $@ -+ -+clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec} $(objtree)/vmlinub.elf $(objtree)/arch/mips/boot/compressed/selfreloc.{o,lds} ---- linux-2.6.36/arch/mips/Makefile~ Wed Jan 5 20:26:12 2011 -+++ linux-2.6.36/arch/mips/Makefile Wed Jan 5 22:41:38 2011 -@@ -62,8 +62,13 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vm - # Calculate the load address of the compressed kernel image - hostprogs-y := calc_vmlinuz_load_addr - -+ifdef CONFIG_BCM47XX -+# XXX just after CFE, just pray the address is static -+VMLINUZ_LOAD_ADDRESS = 0xffffffff80480000 -+else - VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \ - $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS)) -+endif - - vmlinuzobjs-y += $(obj)/piggy.o - -@@ -79,6 +79,7 @@ endif - all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32) - all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64) - all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz -+all-$(CONFIG_BCM47XX) += vmlinub.elf - - # - # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel -@@ -285,7 +286,7 @@ vmlinux.bin vmlinux.ecoff vmlinux.srec: - $(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) arch/mips/boot/$@ - - # boot/compressed --vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec: $(vmlinux-32) FORCE -+vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec vmlinub.elf: $(vmlinux-32) FORCE - $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ - VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $@ - -@@ -322,6 +323,7 @@ define archhelp - echo ' vmlinuz.ecoff - ECOFF zboot image' - echo ' vmlinuz.bin - Raw binary zboot image' - echo ' vmlinuz.srec - SREC zboot image' -+ echo ' vmlinub.elf - ELF self-relocating zboot image' - echo - echo ' These will be default as apropriate for a configured platform.' - endef |