diff options
| -rw-r--r-- | mk/kernel-ver.mk | 2 | ||||
| -rw-r--r-- | target/linux/patches/3.0.30/brcm.patch | 90 | ||||
| -rw-r--r-- | target/linux/patches/3.1.10/brcm.patch | 90 | ||||
| -rw-r--r-- | target/linux/patches/3.2.18/brcm.patch (renamed from target/linux/patches/3.3.7/brcm.patch) | 101 | 
4 files changed, 210 insertions, 73 deletions
| diff --git a/mk/kernel-ver.mk b/mk/kernel-ver.mk index c9f3f5883..4391f2b99 100644 --- a/mk/kernel-ver.mk +++ b/mk/kernel-ver.mk @@ -26,7 +26,7 @@ ifeq ($(ADK_KERNEL_VERSION_3_2_18),y)  KERNEL_VERSION:=	3.2.18  KERNEL_MOD_VERSION:=	$(KERNEL_VERSION)  KERNEL_RELEASE:=	1 -KERNEL_MD5SUM:=		246e6bd28ea44c90ec66c7f8b56e4803 +KERNEL_MD5SUM:=		0beee8d5b887ce4c20121a8bb816bfcf  endif  ifeq ($(ADK_KERNEL_VERSION_3_3_7),y)  KERNEL_VERSION:=	3.3.7 diff --git a/target/linux/patches/3.0.30/brcm.patch b/target/linux/patches/3.0.30/brcm.patch index 87f30da1d..548d26068 100644 --- a/target/linux/patches/3.0.30/brcm.patch +++ b/target/linux/patches/3.0.30/brcm.patch @@ -1,6 +1,6 @@  diff -Nur linux-2.6.39.4.orig/arch/mips/Kconfig linux-2.6.39.4/arch/mips/Kconfig  --- linux-2.6.39.4.orig/arch/mips/Kconfig	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/Kconfig	2012-01-17 20:37:12.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/Kconfig	2012-06-02 20:35:49.000000000 +0200  @@ -103,6 +103,12 @@   	select GENERIC_GPIO   	select SYS_HAS_EARLY_PRINTK @@ -16,7 +16,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/Kconfig linux-2.6.39.4/arch/mips/Kconfig  diff -Nur linux-2.6.39.4.orig/arch/mips/Makefile linux-2.6.39.4/arch/mips/Makefile  --- linux-2.6.39.4.orig/arch/mips/Makefile	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/Makefile	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/Makefile	2012-06-02 20:35:49.000000000 +0200  @@ -76,6 +76,7 @@   all-$(CONFIG_BOOT_ELF32)	:= $(vmlinux-32)   all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64) @@ -44,7 +44,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/Makefile linux-2.6.39.4/arch/mips/Makefi   endef  diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/Makefile linux-2.6.39.4/arch/mips/bcm47xx/Makefile  --- linux-2.6.39.4.orig/arch/mips/bcm47xx/Makefile	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/bcm47xx/Makefile	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/bcm47xx/Makefile	2012-06-02 20:35:49.000000000 +0200  @@ -3,4 +3,4 @@   # under Linux.   # @@ -53,7 +53,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/Makefile linux-2.6.39.4/arch/mip  +obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o platform.o  diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/platform.c linux-2.6.39.4/arch/mips/bcm47xx/platform.c  --- linux-2.6.39.4.orig/arch/mips/bcm47xx/platform.c	1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39.4/arch/mips/bcm47xx/platform.c	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/bcm47xx/platform.c	2012-06-02 20:35:49.000000000 +0200  @@ -0,0 +1,146 @@  +/*  + * This file is subject to the terms and conditions of the GNU General Public @@ -203,8 +203,16 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/platform.c linux-2.6.39.4/arch/m  +device_initcall(bcm47xx_register_devices);  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile linux-2.6.39.4/arch/mips/boot/compressed/Makefile  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/boot/compressed/Makefile	2012-01-17 20:35:09.000000000 +0100 -@@ -58,8 +58,13 @@ ++++ linux-2.6.39.4/arch/mips/boot/compressed/Makefile	2012-06-02 20:37:43.000000000 +0200 +@@ -44,6 +44,7 @@ + tool_$(CONFIG_KERNEL_BZIP2)   = bzip2 + tool_$(CONFIG_KERNEL_LZMA)    = lzma + tool_$(CONFIG_KERNEL_LZO)     = lzo ++tool_$(CONFIG_KERNEL_XZ)      = xzkern +  + targets += vmlinux.bin.z + $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE +@@ -58,8 +59,13 @@   # Calculate the load address of the compressed kernel image   hostprogs-y := calc_vmlinuz_load_addr @@ -218,7 +226,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile linux-2.6.39.4/   vmlinuzobjs-y += $(obj)/piggy.o -@@ -105,4 +110,12 @@ +@@ -105,4 +111,12 @@   vmlinuz.srec: vmlinuz   	$(call cmd,objcopy) @@ -232,9 +240,41 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile linux-2.6.39.4/  +	$(LD) $(LDFLAGS) -T arch/mips/boot/compressed/selfreloc.lds arch/mips/boot/compressed/selfreloc.o -o $@  +  +clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec,elf} $(objtree)/arch/mips/boot/compressed/selfreloc.{o,lds} +diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/decompress.c linux-2.6.39.4/arch/mips/boot/compressed/decompress.c +--- linux-2.6.39.4.orig/arch/mips/boot/compressed/decompress.c	2011-08-03 21:43:28.000000000 +0200 ++++ linux-2.6.39.4/arch/mips/boot/compressed/decompress.c	2012-06-02 20:39:09.000000000 +0200 +@@ -43,7 +43,7 @@ + /* activate the code for pre-boot environment */ + #define STATIC static +  +-#ifdef CONFIG_KERNEL_GZIP ++#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_XZ) + void *memcpy(void *dest, const void *src, size_t n) + { + 	int i; +@@ -54,6 +54,8 @@ + 		d[i] = s[i]; + 	return dest; + } ++#endif ++#ifdef CONFIG_KERNEL_GZIP + #include "../../../../lib/decompress_inflate.c" + #endif +  +@@ -78,6 +80,10 @@ + #include "../../../../lib/decompress_unlzo.c" + #endif +  ++#ifdef CONFIG_KERNEL_XZ ++#include "../../../../lib/decompress_unxz.c" ++#endif ++ + void decompress_kernel(unsigned long boot_heap_start) + { + 	unsigned long zimage_start, zimage_size;  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.S linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.S  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.S	1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.S	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.S	2012-06-02 20:35:49.000000000 +0200  @@ -0,0 +1,54 @@  +/*-  + * written 2011 by Thorsten Glaser <tg@freewrt.org> based on @@ -292,7 +332,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.S linux-2.6.39  +imgend:  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.lds.S linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.lds.S  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.lds.S	1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.lds.S	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.lds.S	2012-06-02 20:35:49.000000000 +0200  @@ -0,0 +1,39 @@  +/*-  + * written 2010 by Thorsten Glaser <tg@debian.org> based on @@ -335,7 +375,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.lds.S linux-2.  +}  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/uart-16550.c linux-2.6.39.4/arch/mips/boot/compressed/uart-16550.c  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/uart-16550.c	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/boot/compressed/uart-16550.c	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/boot/compressed/uart-16550.c	2012-06-02 20:35:49.000000000 +0200  @@ -18,6 +18,11 @@   #define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))   #endif @@ -350,7 +390,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/uart-16550.c linux-2.6.3   #endif  diff -Nur linux-2.6.39.4.orig/drivers/ssb/driver_mipscore.c linux-2.6.39.4/drivers/ssb/driver_mipscore.c  --- linux-2.6.39.4.orig/drivers/ssb/driver_mipscore.c	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/drivers/ssb/driver_mipscore.c	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/drivers/ssb/driver_mipscore.c	2012-06-02 20:35:49.000000000 +0200  @@ -190,10 +190,11 @@   {   	struct ssb_bus *bus = mcore->dev->bus; @@ -366,7 +406,7 @@ diff -Nur linux-2.6.39.4.orig/drivers/ssb/driver_mipscore.c linux-2.6.39.4/drive   			mcore->flash_buswidth = 1;  diff -Nur linux-2.6.39.4.orig/init/Kconfig linux-2.6.39.4/init/Kconfig  --- linux-2.6.39.4.orig/init/Kconfig	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/init/Kconfig	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/init/Kconfig	2012-06-02 20:36:11.000000000 +0200  @@ -156,6 +156,7 @@   config KERNEL_GZIP   	bool "Gzip" @@ -391,7 +431,15 @@ diff -Nur linux-2.6.39.4.orig/init/Kconfig linux-2.6.39.4/init/Kconfig   	help   	  The most recent compression algorithm.   	  Its ratio is best, decompression speed is between the other -@@ -197,6 +200,7 @@ +@@ -182,6 +185,7 @@ + config KERNEL_XZ + 	bool "XZ" + 	depends on HAVE_KERNEL_XZ ++	select DECOMPRESS_XZ + 	help + 	  XZ uses the LZMA2 algorithm and instruction set specific + 	  BCJ filters which can improve compression ratio of executable +@@ -197,6 +201,7 @@   config KERNEL_LZO   	bool "LZO"   	depends on HAVE_KERNEL_LZO @@ -399,3 +447,19 @@ diff -Nur linux-2.6.39.4.orig/init/Kconfig linux-2.6.39.4/init/Kconfig   	help   	  Its compression ratio is the poorest among the 4. The kernel   	  size is about 10% bigger than gzip; however its speed +diff -Nur linux-2.6.39.4.orig/lib/xz/xz_stream.h linux-2.6.39.4/lib/xz/xz_stream.h +--- linux-2.6.39.4.orig/lib/xz/xz_stream.h	2011-08-03 21:43:28.000000000 +0200 ++++ linux-2.6.39.4/lib/xz/xz_stream.h	2012-06-02 20:40:18.000000000 +0200 +@@ -40,7 +40,12 @@ +  * compressed size of the file to less than 256 MiB and may also weaken +  * error detection slightly. +  */ ++ ++#ifdef __mips__ ++typedef uint32_t vli_type; ++#else + typedef uint64_t vli_type; ++#endif +  + #define VLI_MAX ((vli_type)-1 / 2) + #define VLI_UNKNOWN ((vli_type)-1) diff --git a/target/linux/patches/3.1.10/brcm.patch b/target/linux/patches/3.1.10/brcm.patch index 87f30da1d..548d26068 100644 --- a/target/linux/patches/3.1.10/brcm.patch +++ b/target/linux/patches/3.1.10/brcm.patch @@ -1,6 +1,6 @@  diff -Nur linux-2.6.39.4.orig/arch/mips/Kconfig linux-2.6.39.4/arch/mips/Kconfig  --- linux-2.6.39.4.orig/arch/mips/Kconfig	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/Kconfig	2012-01-17 20:37:12.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/Kconfig	2012-06-02 20:35:49.000000000 +0200  @@ -103,6 +103,12 @@   	select GENERIC_GPIO   	select SYS_HAS_EARLY_PRINTK @@ -16,7 +16,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/Kconfig linux-2.6.39.4/arch/mips/Kconfig  diff -Nur linux-2.6.39.4.orig/arch/mips/Makefile linux-2.6.39.4/arch/mips/Makefile  --- linux-2.6.39.4.orig/arch/mips/Makefile	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/Makefile	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/Makefile	2012-06-02 20:35:49.000000000 +0200  @@ -76,6 +76,7 @@   all-$(CONFIG_BOOT_ELF32)	:= $(vmlinux-32)   all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64) @@ -44,7 +44,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/Makefile linux-2.6.39.4/arch/mips/Makefi   endef  diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/Makefile linux-2.6.39.4/arch/mips/bcm47xx/Makefile  --- linux-2.6.39.4.orig/arch/mips/bcm47xx/Makefile	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/bcm47xx/Makefile	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/bcm47xx/Makefile	2012-06-02 20:35:49.000000000 +0200  @@ -3,4 +3,4 @@   # under Linux.   # @@ -53,7 +53,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/Makefile linux-2.6.39.4/arch/mip  +obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o platform.o  diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/platform.c linux-2.6.39.4/arch/mips/bcm47xx/platform.c  --- linux-2.6.39.4.orig/arch/mips/bcm47xx/platform.c	1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39.4/arch/mips/bcm47xx/platform.c	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/bcm47xx/platform.c	2012-06-02 20:35:49.000000000 +0200  @@ -0,0 +1,146 @@  +/*  + * This file is subject to the terms and conditions of the GNU General Public @@ -203,8 +203,16 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/bcm47xx/platform.c linux-2.6.39.4/arch/m  +device_initcall(bcm47xx_register_devices);  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile linux-2.6.39.4/arch/mips/boot/compressed/Makefile  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/boot/compressed/Makefile	2012-01-17 20:35:09.000000000 +0100 -@@ -58,8 +58,13 @@ ++++ linux-2.6.39.4/arch/mips/boot/compressed/Makefile	2012-06-02 20:37:43.000000000 +0200 +@@ -44,6 +44,7 @@ + tool_$(CONFIG_KERNEL_BZIP2)   = bzip2 + tool_$(CONFIG_KERNEL_LZMA)    = lzma + tool_$(CONFIG_KERNEL_LZO)     = lzo ++tool_$(CONFIG_KERNEL_XZ)      = xzkern +  + targets += vmlinux.bin.z + $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE +@@ -58,8 +59,13 @@   # Calculate the load address of the compressed kernel image   hostprogs-y := calc_vmlinuz_load_addr @@ -218,7 +226,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile linux-2.6.39.4/   vmlinuzobjs-y += $(obj)/piggy.o -@@ -105,4 +110,12 @@ +@@ -105,4 +111,12 @@   vmlinuz.srec: vmlinuz   	$(call cmd,objcopy) @@ -232,9 +240,41 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/Makefile linux-2.6.39.4/  +	$(LD) $(LDFLAGS) -T arch/mips/boot/compressed/selfreloc.lds arch/mips/boot/compressed/selfreloc.o -o $@  +  +clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec,elf} $(objtree)/arch/mips/boot/compressed/selfreloc.{o,lds} +diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/decompress.c linux-2.6.39.4/arch/mips/boot/compressed/decompress.c +--- linux-2.6.39.4.orig/arch/mips/boot/compressed/decompress.c	2011-08-03 21:43:28.000000000 +0200 ++++ linux-2.6.39.4/arch/mips/boot/compressed/decompress.c	2012-06-02 20:39:09.000000000 +0200 +@@ -43,7 +43,7 @@ + /* activate the code for pre-boot environment */ + #define STATIC static +  +-#ifdef CONFIG_KERNEL_GZIP ++#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_XZ) + void *memcpy(void *dest, const void *src, size_t n) + { + 	int i; +@@ -54,6 +54,8 @@ + 		d[i] = s[i]; + 	return dest; + } ++#endif ++#ifdef CONFIG_KERNEL_GZIP + #include "../../../../lib/decompress_inflate.c" + #endif +  +@@ -78,6 +80,10 @@ + #include "../../../../lib/decompress_unlzo.c" + #endif +  ++#ifdef CONFIG_KERNEL_XZ ++#include "../../../../lib/decompress_unxz.c" ++#endif ++ + void decompress_kernel(unsigned long boot_heap_start) + { + 	unsigned long zimage_start, zimage_size;  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.S linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.S  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.S	1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.S	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.S	2012-06-02 20:35:49.000000000 +0200  @@ -0,0 +1,54 @@  +/*-  + * written 2011 by Thorsten Glaser <tg@freewrt.org> based on @@ -292,7 +332,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.S linux-2.6.39  +imgend:  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.lds.S linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.lds.S  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.lds.S	1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.lds.S	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/boot/compressed/selfreloc.lds.S	2012-06-02 20:35:49.000000000 +0200  @@ -0,0 +1,39 @@  +/*-  + * written 2010 by Thorsten Glaser <tg@debian.org> based on @@ -335,7 +375,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/selfreloc.lds.S linux-2.  +}  diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/uart-16550.c linux-2.6.39.4/arch/mips/boot/compressed/uart-16550.c  --- linux-2.6.39.4.orig/arch/mips/boot/compressed/uart-16550.c	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/arch/mips/boot/compressed/uart-16550.c	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/arch/mips/boot/compressed/uart-16550.c	2012-06-02 20:35:49.000000000 +0200  @@ -18,6 +18,11 @@   #define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))   #endif @@ -350,7 +390,7 @@ diff -Nur linux-2.6.39.4.orig/arch/mips/boot/compressed/uart-16550.c linux-2.6.3   #endif  diff -Nur linux-2.6.39.4.orig/drivers/ssb/driver_mipscore.c linux-2.6.39.4/drivers/ssb/driver_mipscore.c  --- linux-2.6.39.4.orig/drivers/ssb/driver_mipscore.c	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/drivers/ssb/driver_mipscore.c	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/drivers/ssb/driver_mipscore.c	2012-06-02 20:35:49.000000000 +0200  @@ -190,10 +190,11 @@   {   	struct ssb_bus *bus = mcore->dev->bus; @@ -366,7 +406,7 @@ diff -Nur linux-2.6.39.4.orig/drivers/ssb/driver_mipscore.c linux-2.6.39.4/drive   			mcore->flash_buswidth = 1;  diff -Nur linux-2.6.39.4.orig/init/Kconfig linux-2.6.39.4/init/Kconfig  --- linux-2.6.39.4.orig/init/Kconfig	2011-08-03 21:43:28.000000000 +0200 -+++ linux-2.6.39.4/init/Kconfig	2012-01-17 20:35:09.000000000 +0100 ++++ linux-2.6.39.4/init/Kconfig	2012-06-02 20:36:11.000000000 +0200  @@ -156,6 +156,7 @@   config KERNEL_GZIP   	bool "Gzip" @@ -391,7 +431,15 @@ diff -Nur linux-2.6.39.4.orig/init/Kconfig linux-2.6.39.4/init/Kconfig   	help   	  The most recent compression algorithm.   	  Its ratio is best, decompression speed is between the other -@@ -197,6 +200,7 @@ +@@ -182,6 +185,7 @@ + config KERNEL_XZ + 	bool "XZ" + 	depends on HAVE_KERNEL_XZ ++	select DECOMPRESS_XZ + 	help + 	  XZ uses the LZMA2 algorithm and instruction set specific + 	  BCJ filters which can improve compression ratio of executable +@@ -197,6 +201,7 @@   config KERNEL_LZO   	bool "LZO"   	depends on HAVE_KERNEL_LZO @@ -399,3 +447,19 @@ diff -Nur linux-2.6.39.4.orig/init/Kconfig linux-2.6.39.4/init/Kconfig   	help   	  Its compression ratio is the poorest among the 4. The kernel   	  size is about 10% bigger than gzip; however its speed +diff -Nur linux-2.6.39.4.orig/lib/xz/xz_stream.h linux-2.6.39.4/lib/xz/xz_stream.h +--- linux-2.6.39.4.orig/lib/xz/xz_stream.h	2011-08-03 21:43:28.000000000 +0200 ++++ linux-2.6.39.4/lib/xz/xz_stream.h	2012-06-02 20:40:18.000000000 +0200 +@@ -40,7 +40,12 @@ +  * compressed size of the file to less than 256 MiB and may also weaken +  * error detection slightly. +  */ ++ ++#ifdef __mips__ ++typedef uint32_t vli_type; ++#else + typedef uint64_t vli_type; ++#endif +  + #define VLI_MAX ((vli_type)-1 / 2) + #define VLI_UNKNOWN ((vli_type)-1) diff --git a/target/linux/patches/3.3.7/brcm.patch b/target/linux/patches/3.2.18/brcm.patch index 91fcf4777..e3e37237f 100644 --- a/target/linux/patches/3.3.7/brcm.patch +++ b/target/linux/patches/3.2.18/brcm.patch @@ -1,7 +1,7 @@ -diff -Nur linux-3.3.7.orig/arch/mips/Kconfig linux-3.3.7/arch/mips/Kconfig ---- linux-3.3.7.orig/arch/mips/Kconfig	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/arch/mips/Kconfig	2012-05-25 21:45:16.000000000 +0200 -@@ -102,6 +102,12 @@ +diff -Nur linux-3.2.18.orig/arch/mips/Kconfig linux-3.2.18/arch/mips/Kconfig +--- linux-3.2.18.orig/arch/mips/Kconfig	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/arch/mips/Kconfig	2012-06-07 17:55:16.000000000 +0200 +@@ -99,6 +99,12 @@   	select GENERIC_GPIO   	select SYS_HAS_EARLY_PRINTK   	select CFE @@ -14,9 +14,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/Kconfig linux-3.3.7/arch/mips/Kconfig   	help   	 Support for BCM47XX based boards -diff -Nur linux-3.3.7.orig/arch/mips/Makefile linux-3.3.7/arch/mips/Makefile ---- linux-3.3.7.orig/arch/mips/Makefile	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/arch/mips/Makefile	2012-05-25 21:45:16.000000000 +0200 +diff -Nur linux-3.2.18.orig/arch/mips/Makefile linux-3.2.18/arch/mips/Makefile +--- linux-3.2.18.orig/arch/mips/Makefile	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/arch/mips/Makefile	2012-06-07 17:55:16.000000000 +0200  @@ -76,6 +76,7 @@   all-$(CONFIG_BOOT_ELF32)	:= $(vmlinux-32)   all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64) @@ -25,7 +25,7 @@ diff -Nur linux-3.3.7.orig/arch/mips/Makefile linux-3.3.7/arch/mips/Makefile   #   # GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel -@@ -277,7 +278,7 @@ +@@ -276,7 +277,7 @@   	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) arch/mips/boot/$@   # boot/compressed @@ -34,7 +34,7 @@ diff -Nur linux-3.3.7.orig/arch/mips/Makefile linux-3.3.7/arch/mips/Makefile   	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \   	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $@ -@@ -316,6 +317,7 @@ +@@ -315,6 +316,7 @@   	echo '  vmlinuz.ecoff        - ECOFF zboot image'   	echo '  vmlinuz.bin          - Raw binary zboot image'   	echo '  vmlinuz.srec         - SREC zboot image' @@ -42,9 +42,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/Makefile linux-3.3.7/arch/mips/Makefile   	echo   	echo '  These will be default as appropriate for a configured platform.'   endef -diff -Nur linux-3.3.7.orig/arch/mips/bcm47xx/Makefile linux-3.3.7/arch/mips/bcm47xx/Makefile ---- linux-3.3.7.orig/arch/mips/bcm47xx/Makefile	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/arch/mips/bcm47xx/Makefile	2012-05-25 21:46:00.000000000 +0200 +diff -Nur linux-3.2.18.orig/arch/mips/bcm47xx/Makefile linux-3.2.18/arch/mips/bcm47xx/Makefile +--- linux-3.2.18.orig/arch/mips/bcm47xx/Makefile	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/arch/mips/bcm47xx/Makefile	2012-06-07 17:55:43.000000000 +0200  @@ -3,5 +3,4 @@   # under Linux.   # @@ -52,9 +52,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/bcm47xx/Makefile linux-3.3.7/arch/mips/bcm4  -obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o  -obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o  +obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o platform.o -diff -Nur linux-3.3.7.orig/arch/mips/bcm47xx/platform.c linux-3.3.7/arch/mips/bcm47xx/platform.c ---- linux-3.3.7.orig/arch/mips/bcm47xx/platform.c	1970-01-01 01:00:00.000000000 +0100 -+++ linux-3.3.7/arch/mips/bcm47xx/platform.c	2012-05-25 21:56:28.000000000 +0200 +diff -Nur linux-3.2.18.orig/arch/mips/bcm47xx/platform.c linux-3.2.18/arch/mips/bcm47xx/platform.c +--- linux-3.2.18.orig/arch/mips/bcm47xx/platform.c	1970-01-01 01:00:00.000000000 +0100 ++++ linux-3.2.18/arch/mips/bcm47xx/platform.c	2012-06-07 18:19:11.000000000 +0200  @@ -0,0 +1,146 @@  +/*  + * This file is subject to the terms and conditions of the GNU General Public @@ -202,9 +202,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/bcm47xx/platform.c linux-3.3.7/arch/mips/bc  +}  +  +device_initcall(bcm47xx_register_devices); -diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/Makefile linux-3.3.7/arch/mips/boot/compressed/Makefile ---- linux-3.3.7.orig/arch/mips/boot/compressed/Makefile	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/arch/mips/boot/compressed/Makefile	2012-05-28 22:34:04.000000000 +0200 +diff -Nur linux-3.2.18.orig/arch/mips/boot/compressed/Makefile linux-3.2.18/arch/mips/boot/compressed/Makefile +--- linux-3.2.18.orig/arch/mips/boot/compressed/Makefile	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/arch/mips/boot/compressed/Makefile	2012-06-07 17:55:16.000000000 +0200  @@ -44,6 +44,7 @@   tool_$(CONFIG_KERNEL_BZIP2)   = bzip2   tool_$(CONFIG_KERNEL_LZMA)    = lzma @@ -241,9 +241,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/Makefile linux-3.3.7/arch/m  +	$(LD) $(LDFLAGS) -T arch/mips/boot/compressed/selfreloc.lds arch/mips/boot/compressed/selfreloc.o -o $@  +  +clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec,elf} $(objtree)/arch/mips/boot/compressed/selfreloc.{o,lds} -diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/decompress.c linux-3.3.7/arch/mips/boot/compressed/decompress.c ---- linux-3.3.7.orig/arch/mips/boot/compressed/decompress.c	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/arch/mips/boot/compressed/decompress.c	2012-05-28 22:33:19.000000000 +0200 +diff -Nur linux-3.2.18.orig/arch/mips/boot/compressed/decompress.c linux-3.2.18/arch/mips/boot/compressed/decompress.c +--- linux-3.2.18.orig/arch/mips/boot/compressed/decompress.c	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/arch/mips/boot/compressed/decompress.c	2012-06-07 17:55:16.000000000 +0200  @@ -43,7 +43,7 @@   /* activate the code for pre-boot environment */   #define STATIC static @@ -262,20 +262,20 @@ diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/decompress.c linux-3.3.7/ar   #include "../../../../lib/decompress_inflate.c"   #endif -@@ -74,6 +76,10 @@ - #include "../../../../lib/decompress_unlzma.c" +@@ -78,6 +80,10 @@ + #include "../../../../lib/decompress_unlzo.c"   #endif  +#ifdef CONFIG_KERNEL_XZ  +#include "../../../../lib/decompress_unxz.c"  +#endif  + - #ifdef CONFIG_KERNEL_LZO - #include "../../../../lib/decompress_unlzo.c" - #endif -diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/selfreloc.S linux-3.3.7/arch/mips/boot/compressed/selfreloc.S ---- linux-3.3.7.orig/arch/mips/boot/compressed/selfreloc.S	1970-01-01 01:00:00.000000000 +0100 -+++ linux-3.3.7/arch/mips/boot/compressed/selfreloc.S	2012-05-25 21:45:16.000000000 +0200 + void decompress_kernel(unsigned long boot_heap_start) + { + 	unsigned long zimage_start, zimage_size; +diff -Nur linux-3.2.18.orig/arch/mips/boot/compressed/selfreloc.S linux-3.2.18/arch/mips/boot/compressed/selfreloc.S +--- linux-3.2.18.orig/arch/mips/boot/compressed/selfreloc.S	1970-01-01 01:00:00.000000000 +0100 ++++ linux-3.2.18/arch/mips/boot/compressed/selfreloc.S	2012-06-07 17:55:16.000000000 +0200  @@ -0,0 +1,54 @@  +/*-  + * written 2011 by Thorsten Glaser <tg@freewrt.org> based on @@ -331,9 +331,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/selfreloc.S linux-3.3.7/arc  +	.globl	imgend  +	.p2align 2  +imgend: -diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/selfreloc.lds.S linux-3.3.7/arch/mips/boot/compressed/selfreloc.lds.S ---- linux-3.3.7.orig/arch/mips/boot/compressed/selfreloc.lds.S	1970-01-01 01:00:00.000000000 +0100 -+++ linux-3.3.7/arch/mips/boot/compressed/selfreloc.lds.S	2012-05-25 21:45:16.000000000 +0200 +diff -Nur linux-3.2.18.orig/arch/mips/boot/compressed/selfreloc.lds.S linux-3.2.18/arch/mips/boot/compressed/selfreloc.lds.S +--- linux-3.2.18.orig/arch/mips/boot/compressed/selfreloc.lds.S	1970-01-01 01:00:00.000000000 +0100 ++++ linux-3.2.18/arch/mips/boot/compressed/selfreloc.lds.S	2012-06-07 17:55:16.000000000 +0200  @@ -0,0 +1,39 @@  +/*-  + * written 2010 by Thorsten Glaser <tg@debian.org> based on @@ -374,9 +374,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/selfreloc.lds.S linux-3.3.7  +		*(.gnu.attributes)  +	}  +} -diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/uart-16550.c linux-3.3.7/arch/mips/boot/compressed/uart-16550.c ---- linux-3.3.7.orig/arch/mips/boot/compressed/uart-16550.c	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/arch/mips/boot/compressed/uart-16550.c	2012-05-25 21:45:16.000000000 +0200 +diff -Nur linux-3.2.18.orig/arch/mips/boot/compressed/uart-16550.c linux-3.2.18/arch/mips/boot/compressed/uart-16550.c +--- linux-3.2.18.orig/arch/mips/boot/compressed/uart-16550.c	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/arch/mips/boot/compressed/uart-16550.c	2012-06-07 17:55:16.000000000 +0200  @@ -18,6 +18,11 @@   #define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))   #endif @@ -389,9 +389,9 @@ diff -Nur linux-3.3.7.orig/arch/mips/boot/compressed/uart-16550.c linux-3.3.7/ar   #ifndef PORT   #error please define the serial port address for your own machine   #endif -diff -Nur linux-3.3.7.orig/drivers/ssb/driver_mipscore.c linux-3.3.7/drivers/ssb/driver_mipscore.c ---- linux-3.3.7.orig/drivers/ssb/driver_mipscore.c	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/drivers/ssb/driver_mipscore.c	2012-05-25 21:45:16.000000000 +0200 +diff -Nur linux-3.2.18.orig/drivers/ssb/driver_mipscore.c linux-3.2.18/drivers/ssb/driver_mipscore.c +--- linux-3.2.18.orig/drivers/ssb/driver_mipscore.c	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/drivers/ssb/driver_mipscore.c	2012-06-07 17:55:16.000000000 +0200  @@ -190,10 +190,11 @@   {   	struct ssb_bus *bus = mcore->dev->bus; @@ -405,9 +405,9 @@ diff -Nur linux-3.3.7.orig/drivers/ssb/driver_mipscore.c linux-3.3.7/drivers/ssb   		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)   		               & SSB_CHIPCO_CFG_DS16) == 0)   			mcore->flash_buswidth = 1; -diff -Nur linux-3.3.7.orig/init/Kconfig linux-3.3.7/init/Kconfig ---- linux-3.3.7.orig/init/Kconfig	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/init/Kconfig	2012-05-25 21:45:16.000000000 +0200 +diff -Nur linux-3.2.18.orig/init/Kconfig linux-3.2.18/init/Kconfig +--- linux-3.2.18.orig/init/Kconfig	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/init/Kconfig	2012-06-07 17:55:16.000000000 +0200  @@ -155,6 +155,7 @@   config KERNEL_GZIP   	bool "Gzip" @@ -432,7 +432,15 @@ diff -Nur linux-3.3.7.orig/init/Kconfig linux-3.3.7/init/Kconfig   	help   	  The most recent compression algorithm.   	  Its ratio is best, decompression speed is between the other -@@ -196,6 +199,7 @@ +@@ -181,6 +184,7 @@ + config KERNEL_XZ + 	bool "XZ" + 	depends on HAVE_KERNEL_XZ ++	select DECOMPRESS_XZ + 	help + 	  XZ uses the LZMA2 algorithm and instruction set specific + 	  BCJ filters which can improve compression ratio of executable +@@ -196,6 +200,7 @@   config KERNEL_LZO   	bool "LZO"   	depends on HAVE_KERNEL_LZO @@ -440,13 +448,14 @@ diff -Nur linux-3.3.7.orig/init/Kconfig linux-3.3.7/init/Kconfig   	help   	  Its compression ratio is the poorest among the 4. The kernel   	  size is about 10% bigger than gzip; however its speed -diff -Nur linux-3.3.7.orig/lib/xz/xz_stream.h linux-3.3.7/lib/xz/xz_stream.h ---- linux-3.3.7.orig/lib/xz/xz_stream.h	2012-05-21 20:42:51.000000000 +0200 -+++ linux-3.3.7/lib/xz/xz_stream.h	2012-05-28 22:32:40.000000000 +0200 -@@ -40,7 +40,11 @@ +diff -Nur linux-3.2.18.orig/lib/xz/xz_stream.h linux-3.2.18/lib/xz/xz_stream.h +--- linux-3.2.18.orig/lib/xz/xz_stream.h	2012-05-20 23:56:54.000000000 +0200 ++++ linux-3.2.18/lib/xz/xz_stream.h	2012-06-07 17:55:16.000000000 +0200 +@@ -40,7 +40,12 @@    * compressed size of the file to less than 256 MiB and may also weaken    * error detection slightly.    */ ++  +#ifdef __mips__  +typedef uint32_t vli_type;  +#else | 
