summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--mk/build.mk2
-rw-r--r--package/aiccu/Makefile3
-rw-r--r--package/bridge-utils/Makefile1
-rw-r--r--package/busybox/config/networking/Config.in1
-rw-r--r--package/chillispot/Makefile3
-rw-r--r--package/openvpn/Makefile1
-rw-r--r--package/ppp/Makefile1
-rw-r--r--package/pptp/Makefile2
-rw-r--r--package/pptpd/Makefile5
-rw-r--r--package/tinc/Makefile1
-rw-r--r--package/vpnc/Makefile1
-rw-r--r--package/vtun/Makefile1
-rw-r--r--target/linux/config/Config.in.audio96
-rw-r--r--target/linux/config/Config.in.network161
-rw-r--r--target/linux/config/Config.in.spi24
-rw-r--r--target/linux/config/Config.in.usb115
-rw-r--r--target/linux/kernel.config1
17 files changed, 156 insertions, 263 deletions
diff --git a/mk/build.mk b/mk/build.mk
index 751aa2ae4..6ac3a77f5 100644
--- a/mk/build.mk
+++ b/mk/build.mk
@@ -10,6 +10,8 @@ DEFCONFIG= ADK_DEBUG=n \
ADK_PACKAGE_BUSYBOX_HIDE=n \
ADK_DISABLE_KERNEL_PATCHES=n \
ADK_DISABLE_TARGET_KERNEL_PATCHES=n \
+ ADK_DISABLE_TCP_FASTOPEN=n \
+ ADK_KERNEL_FB_CON_DECOR=n \
ADK_CHOOSE_APPLIANCE=n \
ADK_WGET_TIMEOUT=180 \
ADK_MAKE_PARALLEL=y \
diff --git a/package/aiccu/Makefile b/package/aiccu/Makefile
index 33563aa5b..f20c82635 100644
--- a/package/aiccu/Makefile
+++ b/package/aiccu/Makefile
@@ -12,8 +12,9 @@ PKG_SECTION:= net/ipv6
PKG_DEPENDS:= libpthread
PKG_URL:= http://www.sixxs.net/
PKG_SITES:= http://www.sixxs.net/archive/sixxs/aiccu/unix/
+PKG_CFLINE_AICCU:= select ADK_KERNEL_TUN m
-PKG_LIBC_DEPENDS:= uclibc glibc
+PKG_LIBC_DEPENDS:= uclibc-ng uclibc glibc
DISTFILES:= $(PKG_NAME)_$(PKG_VERSION).tar.gz
WRKDIST= ${WRKDIR}/$(PKG_NAME)
diff --git a/package/bridge-utils/Makefile b/package/bridge-utils/Makefile
index 2afc30709..fbf5c22dd 100644
--- a/package/bridge-utils/Makefile
+++ b/package/bridge-utils/Makefile
@@ -12,6 +12,7 @@ PKG_SECTION:= net/route
PKG_URL:= http://www.linuxfoundation.org/en/Net:Bridge
PKG_SITES:= ${MASTER_SITE_SOURCEFORGE:=bridge/}
PKG_BB:= 1
+PKG_CFLINE_BRIDGE_UTILS:=select ADK_KERNEL_BRIDGE
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in
index 21628221f..cdc765d97 100644
--- a/package/busybox/config/networking/Config.in
+++ b/package/busybox/config/networking/Config.in
@@ -435,6 +435,7 @@ config BUSYBOX_FEATURE_IFCONFIG_BROADCAST_PLUS
config BUSYBOX_IFENSLAVE
bool "ifenslave"
+ select ADK_KERNEL_BONDING m
default n
select BUSYBOX_PLATFORM_LINUX
help
diff --git a/package/chillispot/Makefile b/package/chillispot/Makefile
index a031a1c5d..02fc2a941 100644
--- a/package/chillispot/Makefile
+++ b/package/chillispot/Makefile
@@ -10,7 +10,8 @@ PKG_MD5SUM:= 9d2597756af3fa14d7331b4a3651fc9b
PKG_DESCR:= wireless lan access point controller
PKG_SECTION:= net/wifi
PKG_URL:= http://www.chillispot.info/
-PKG_SITES= http://www.chillispot.info/download/
+PKG_SITES:= http://www.chillispot.info/download/
+PKG_CFLINE_CHILLISPOT:= select ADK_KERNEL_TUN m
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
diff --git a/package/openvpn/Makefile b/package/openvpn/Makefile
index 044d86a71..1ec1112aa 100644
--- a/package/openvpn/Makefile
+++ b/package/openvpn/Makefile
@@ -13,6 +13,7 @@ PKG_DEPENDS:= ip
PKG_BUILDDEP:= openssl
PKG_URL:= http://openvpn.net/
PKG_SITES:= http://swupdate.openvpn.org/community/releases/
+PKG_CFLINE_OPENVPN:= select ADK_KERNEL_TUN m
PKG_FLAVOURS_OPENVPN:= WITH_LZO WITH_MANAGEMENT WITH_HTTPPROXY WITH_SOCKS
PKGFD_WITH_LZO:= enable lzo compression support
diff --git a/package/ppp/Makefile b/package/ppp/Makefile
index 9d84efe81..b9207e877 100644
--- a/package/ppp/Makefile
+++ b/package/ppp/Makefile
@@ -12,6 +12,7 @@ PKG_SECTION:= net/ppp
PKG_BUILDDEP:= libpcap
PKG_URL:= http://ppp.samba.org/
PKG_SITES:= ftp://ftp.samba.org/pub/ppp/
+PKG_CFLINE_PPP:= select ADK_KERNEL_PPP m
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
diff --git a/package/pptp/Makefile b/package/pptp/Makefile
index 46faa1d85..64819bbe8 100644
--- a/package/pptp/Makefile
+++ b/package/pptp/Makefile
@@ -11,6 +11,8 @@ PKG_DESCR:= point-to-point tunneling protocol client
PKG_SECTION:= net/ppp
PKG_DEPENDS:= ppp
PKG_SITES:= ${MASTER_SITE_SOURCEFORGE:=pptpclient/}
+PKG_CFLINE_PPTP:= select ADK_KERNEL_NET_IPGRE m@
+PKG_CFLINE_PPTP+= select ADK_KERNEL_PPP m
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
diff --git a/package/pptpd/Makefile b/package/pptpd/Makefile
index 05b4dc3de..1d4a53b0e 100644
--- a/package/pptpd/Makefile
+++ b/package/pptpd/Makefile
@@ -12,10 +12,13 @@ PKG_SECTION:= net/ppp
PKG_DEPENDS:= ppp
PKG_URL:= http://www.poptop.org/
PKG_SITES:= ${MASTER_SITE_SOURCEFORGE:=poptop/}
+PKG_CFLINE_PPTPD:= select ADK_KERNEL_NET_IPGRE m@
+PKG_CFLINE_PPTPD+= select ADK_KERNEL_PPP m@
+PKG_CFLINE_PPTPD+= select ADK_KERNEL_PPP_MPPE m
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
-PKG_LIBC_DEPENDS:= uclibc glibc
+PKG_LIBC_DEPENDS:= uclibc-ng uclibc glibc
include ${ADK_TOPDIR}/mk/package.mk
diff --git a/package/tinc/Makefile b/package/tinc/Makefile
index 0a7661a6c..a9adad559 100644
--- a/package/tinc/Makefile
+++ b/package/tinc/Makefile
@@ -13,6 +13,7 @@ PKG_DEPENDS:= zlib liblzo libopenssl
PKG_BUILDDEP:= zlib liblzo openssl
PKG_URL:= http://www.tinc-vpn.org/
PKG_SITES:= http://www.tinc-vpn.org/packages/
+PKG_CFLINE_TINC:= select ADK_KERNEL_TUN m
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
diff --git a/package/vpnc/Makefile b/package/vpnc/Makefile
index a2beed52c..51e975b6c 100644
--- a/package/vpnc/Makefile
+++ b/package/vpnc/Makefile
@@ -13,6 +13,7 @@ PKG_DEPENDS:= libgcrypt libgpg-error
PKG_BUILDDEP:= libgcrypt libgpg-error
PKG_URL:= http://www.unix-ag.uni-kl.de/~massar/vpnc/
PKG_SITES:= http://www.unix-ag.uni-kl.de/~massar/vpnc/
+PKG_CFLINE_VPNC:= select ADK_KERNEL_TUN m
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
diff --git a/package/vtun/Makefile b/package/vtun/Makefile
index 15d1f7c6e..05c7e6706 100644
--- a/package/vtun/Makefile
+++ b/package/vtun/Makefile
@@ -12,6 +12,7 @@ PKG_SECTION:= net/security
PKG_DEPENDS:= zlib libopenssl liblzo
PKG_BUILDDEP:= zlib openssl liblzo
PKG_SITES:= ${MASTER_SITE_SOURCEFORGE:=vtun/}
+PKG_CFLINE_VTUN:= select ADK_KERNEL_TUN m
DISTFILES:= ${PKG_NAME}-${PKG_VERSION}.tar.gz
diff --git a/target/linux/config/Config.in.audio b/target/linux/config/Config.in.audio
index d8888be5a..e367d9115 100644
--- a/target/linux/config/Config.in.audio
+++ b/target/linux/config/Config.in.audio
@@ -2,76 +2,76 @@ menu "Audio devices support"
depends on ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SOUND || ADK_TARGET_QEMU
config ADK_KERNEL_SND_PCI
- boolean
+ bool
config ADK_KERNEL_SND_USB
- boolean
+ bool
config ADK_KERNEL_SND_SOC
- boolean
+ bool
config ADK_KERNEL_SND_ARM
- boolean
+ bool
config ADK_KERNEL_SND_SOC_GENERIC_DMAENGINE_PCM
- boolean
+ bool
config ADK_KERNEL_SND_DMAENGINE_PCM
- boolean
+ bool
config ADK_KERNEL_SND_SOC_SPDIF
- boolean
+ bool
config ADK_KERNEL_SND_SOC_FSL_ASRC
- boolean
+ bool
config ADK_KERNEL_SND_SOC_FSL_SPDIF
- boolean
+ bool
config ADK_KERNEL_SND_SOC_IMX_SGTL5000
- boolean
+ bool
config ADK_KERNEL_SND_SOC_IMX_PCM_DMA
- boolean
+ bool
config ADK_KERNEL_SND_SOC_IMX_HDMI_DMA
- boolean
+ bool
config ADK_KERNEL_SND_SOC_IMX_SPDIF
- boolean
+ bool
config ADK_KERNEL_SND_SOC_IMX_HDMI
- boolean
+ bool
config ADK_KERNEL_SND_PXA2XX_AC97
- boolean
+ bool
config ADK_KERNEL_SND_PXA2XX_SOC
- boolean
+ bool
config ADK_KERNEL_SND_TIMER
- boolean
+ bool
config ADK_KERNEL_SND_PCM
+ bool
select ADK_KERNEL_SND_TIMER
select ADK_KERNEL_SND_DMAENGINE_PCM
select ADK_KERNEL_SND_PCM_DMAENGINE
- boolean
config ADK_KERNEL_SND_HWDEP
- boolean
+ bool
config ADK_KERNEL_SOUND
- boolean
+ bool
config ADK_KERNEL_SND_RAWMIDI
- boolean
+ bool
config ADK_KERNEL_SND_AC97_CODEC
- boolean
+ bool
config ADK_KERNEL_SND_SOC_I2C_AND_SPI
- boolean
+ bool
config ADK_KERNEL_SND_SOC_WM8731
tristate
@@ -100,18 +100,16 @@ config ADK_KERNEL_SND_SOC_PCM512x_SPI
select ADK_KERNEL_SND_SOC_I2C_AND_SPI
config ADK_KERNEL_SND_PCM_DMAENGINE
- boolean
+ bool
config ADK_KERNEL_SND
- boolean
+ bool
select ADK_KERNEL_SOUND
select ADK_KERNEL_SND_PCM
select ADK_KERNEL_SND_HWDEP
- default n
config ADK_KERNEL_SND_INTEL8X0
- prompt "Intel AC97 driver"
- boolean
+ bool "Intel AC97 driver"
select ADK_KERNEL_SND
select ADK_KERNEL_SND_PCI
select ADK_KERNEL_SND_AC97_CODEC
@@ -123,39 +121,32 @@ config ADK_KERNEL_SND_INTEL8X0
Driver for intel chipsets.
config ADK_KERNEL_SND_VIA82XX
- prompt "VIA82XX driver"
- boolean
+ bool "VIA82XX driver"
select ADK_KERNEL_SND
- default n
depends on ADK_TARGET_WITH_PCI
help
ALSA VIA82XX driver
config ADK_KERNEL_SND_ENS1370
- prompt "Ensoniq 1370 driver"
- boolean
+ bool "Ensoniq 1370 driver"
select ADK_KERNEL_SND
- default n
depends on ADK_TARGET_WITH_PCI
help
ALSA Ensonique 1370 driver
config ADK_KERNEL_SND_CS5535AUDIO
- prompt "AMD CS5535 driver"
- boolean
+ bool "AMD CS5535 driver"
select ADK_KERNEL_SND_PCI
select ADK_KERNEL_SND_AC97_CODEC
select ADK_KERNEL_SND
default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C
- default n
depends on ADK_TARGET_WITH_PCI
help
ALSA AMD CS5535 driver
config ADK_KERNEL_SND_PXA2XX_SOC_SPITZ
- prompt "Sharp Zaurus SoC"
- boolean
+ bool "Sharp Zaurus SoC"
select ADK_KERNEL_SND
select ADK_KERNEL_SND_ARM
select ADK_KERNEL_SND_PXA2XX_AC97
@@ -167,8 +158,7 @@ config ADK_KERNEL_SND_PXA2XX_SOC_SPITZ
default n
config ADK_KERNEL_SND_BCM2835
- prompt "Raspberry PI onboard soundcard"
- boolean
+ bool "Raspberry PI onboard soundcard"
select ADK_KERNEL_SND
select ADK_KERNEL_SND_ARM
depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
@@ -189,47 +179,37 @@ config ADK_KERNEL_SND_BCM2708_SOC_I2S
default n
config ADK_KERNEL_SND_BCM2708_SOC_HIFIBERRY_DAC
- prompt "Hifiberry DAC"
- tristate
+ tristate "Hifiberry DAC"
select ADK_KERNEL_SND_BCM2708_SOC_I2S
select ADK_KERNEL_SND_SOC_PCM5102A
depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
- default n
config ADK_KERNEL_SND_BCM2708_SOC_HIFIBERRY_DIGI
- prompt "Hifiberry DIGI"
- tristate
+ tristate "Hifiberry DIGI"
select ADK_KERNEL_SND_BCM2708_SOC_I2S
select ADK_KERNEL_SND_SOC_WM8804
depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
- default n
config ADK_KERNEL_SND_BCM2708_SOC_RPI_DAC
- prompt "RPI-DAC"
- tristate
+ tristate "RPI-DAC"
select ADK_KERNEL_SND_BCM2708_SOC_I2S
depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
- default n
config ADK_KERNEL_SND_BCM2708_SOC_IQAUDIO_DAC
- prompt "IQAudio-DAC"
- tristate
+ tristate "IQAudio-DAC"
select ADK_KERNEL_SND_BCM2708_SOC_I2S
select ADK_KERNEL_SND_SOC_PCM512x_I2C
depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
- default n
config ADK_KERNEL_SND_BCM2708_SOC_RPI_CODEC_PROTO
- prompt "Rpi-Codec-Proto"
- tristate
+ tristate "Rpi-Codec-Proto"
select ADK_KERNEL_SND_BCM2708_SOC_I2S
select ADK_KERNEL_SND_SOC_WM8731
depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
- default n
+ depends on ADK_KERNEL_VERSION_3_12
config ADK_KERNEL_SND_IMX_SOC
- prompt "Solidrun SoC sound chip"
- boolean
+ bool "Solidrun SoC sound chip"
select ADK_KERNEL_SND
select ADK_KERNEL_SND_SOC
select ADK_KERNEL_SND_SOC_GENERIC_DMAENGINE_PCM
diff --git a/target/linux/config/Config.in.network b/target/linux/config/Config.in.network
index 6e20a190e..a9980d50d 100644
--- a/target/linux/config/Config.in.network
+++ b/target/linux/config/Config.in.network
@@ -1,67 +1,75 @@
menu "Network support"
+config ADK_KERNEL_CONFIG_INET
+ bool "Enable TCP/IP support"
+ select ADK_KERNEL_CRYPTO_AES
+ default y
+
config ADK_KERNEL_IP_FIB_HASH
- boolean
+ bool
default y
config ADK_DISABLE_TCP_FASTOPEN
- prompt "Disable TCP Fastopen"
- boolean
+ bool "Disable TCP Fastopen"
select ADK_KERNEL_ADDON_DIETNET
- default n
+
+config ADK_KERNEL_IPV6
+ tristate "Enable IPv6 support"
+ help
+ This is complemental support for the IP version 6.
+ You will still be able to do traditional IPv4 networking as well.
+
+ For general information about IPv6, see
+ <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
+ For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
+ For specific information about IPv6 under Linux, read the HOWTO at
+ <http://www.bieringer.de/linux/IPv6/>.
+
+config ADK_KERNEL_IPV6_SIT
+ tristate "IPv6-in-IPv4 tunnel (SIT driver)"
+ select ADK_KERNEL_INET_TUNNEL
+ help
+ Tunneling means encapsulating data of one protocol type within
+ another protocol and sending it over a channel that understands the
+ encapsulating protocol. This driver implements encapsulation of IPv6
+ into IPv4 packets. This is useful if you want to connect two IPv6
+ networks over an IPv4-only path.
config ADK_KERNEL_SYN_COOKIES
- prompt "IP: TCP syncookie support"
- boolean
- default n
+ bool "TCP syncookie support"
config ADK_KERNEL_IP_PNP_BOOTP
- boolean
- default n
+ bool
config ADK_KERNEL_IP_PNP_RARP
- boolean
- default n
+ bool
config ADK_KERNEL_NET_IPGRE_BROADCAST
- boolean
- default n
+ bool
config ADK_KERNEL_NET_IPGRE_DEMUX
- boolean
- default n
+ bool
config ADK_KERNEL_PPP_ASYNC
- boolean
- default n
+ bool
config ADK_KERNEL_SLHC
- boolean
- default n
+ bool
config ADK_KERNEL_IMQ
tristate
- default n
config ADK_KERNEL_LLC
tristate
- default n
-
config ADK_KERNEL_IP_MULTICAST
- prompt "Enable IP Multicasting"
- boolean
- default n
+ bool "Enable IP Multicasting"
config ADK_KERNEL_IP_MROUTE
- prompt "Enable IP Multicasting Routing"
- boolean
- default n
+ bool "Enable IP Multicasting Routing"
config ADK_KERNEL_ATM
- prompt "Asynchronous Transfer Mode (ATM)"
- tristate
- default n
+ tristate "Asynchronous Transfer Mode (ATM)"
help
ATM is a high-speed networking technology for Local Area Networks
and Wide Area Networks. It uses a fixed packet size and is
@@ -77,18 +85,12 @@ config ADK_KERNEL_ATM
further details.
config ADK_KERNEL_ATM_BR2684
- prompt "BR2684 ATM module"
- tristate
+ tristate "BR2684 ATM module"
select ADK_KERNEL_ATM
- default n
- help
config ADK_KERNEL_BRIDGE
- prompt "802.1d Ethernet Bridging"
- tristate
+ tristate "802.1d Ethernet Bridging"
select ADK_KERNEL_LLC
- default m if ADK_PACKAGE_BRIDGE_UTILS
- default n
help
If you say Y here, then your Linux box will be able to act as an
Ethernet bridge, which means that the different Ethernet segments it
@@ -111,9 +113,7 @@ config ADK_KERNEL_BRIDGE
bridged ARP traffic in the arptables FORWARD chain.
config ADK_KERNEL_VLAN_8021Q
- prompt "802.1q VLAN support"
- tristate
- default n
+ tristate "802.1q VLAN support"
help
Select this and you will be able to create 802.1Q VLAN interfaces
on your ethernet interfaces. 802.1Q VLAN supports almost
@@ -125,14 +125,10 @@ config ADK_KERNEL_VLAN_8021Q
config ADK_KERNEL_INET_TUNNEL
tristate
- default n
- help
config ADK_KERNEL_NET_IPIP
- prompt "IP in IP encapsulation support"
- tristate
+ tristate "IP in IP encapsulation support"
select ADK_KERNEL_INET_TUNNEL
- default n
help
Tunneling means encapsulating data of one protocol type within
another protocol and sending it over a channel that understands the
@@ -144,13 +140,9 @@ config ADK_KERNEL_NET_IPIP
networks without changing their IP addresses).
config ADK_KERNEL_NET_IPGRE
- prompt "GRE tunnels over IP"
- tristate
+ tristate "GRE tunnels over IP"
select ADK_KERNEL_NET_IPGRE_BROADCAST
select ADK_KERNEL_NET_IPGRE_DEMUX
- default m if ADK_PACKAGE_PPTP
- default m if ADK_PACKAGE_PPTPD
- default n
help
Tunneling means encapsulating data of one protocol type within
another protocol and sending it over a channel that understands the
@@ -162,42 +154,11 @@ config ADK_KERNEL_NET_IPGRE
tunneling" above). In addition, GRE allows multicast redistribution
through the tunnel.
-config ADK_KERNEL_IPV6
- prompt "IPv6 support"
- tristate
- default n
- help
- This is complemental support for the IP version 6.
- You will still be able to do traditional IPv4 networking as well.
-
- For general information about IPv6, see
- <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
- For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
- For specific information about IPv6 under Linux, read the HOWTO at
- <http://www.bieringer.de/linux/IPv6/>.
-
-config ADK_KERNEL_IPV6_SIT
- prompt "IPv6-in-IPv4 tunnel (SIT driver)"
- tristate
- select ADK_KERNEL_INET_TUNNEL
- default n
- help
- Tunneling means encapsulating data of one protocol type within
- another protocol and sending it over a channel that understands the
- encapsulating protocol. This driver implements encapsulation of IPv6
- into IPv4 packets. This is useful if you want to connect two IPv6
- networks over an IPv4-only path.
-
config ADK_KERNEL_PPP
- prompt "PPP support"
- tristate
+ tristate "PPP support"
select ADK_KERNEL_PPP_ASYNC
select ADK_KERNEL_SLHC
select ADK_KERNEL_CRC_CCITT
- default m if ADK_PACKAGE_PPTP
- default m if ADK_PACKAGE_PPTPD
- default m if ADK_PACKAGE_PPP
- default n
help
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
@@ -221,15 +182,12 @@ config ADK_KERNEL_PPP
synchronous PPP", below.
config ADK_KERNEL_PPP_MPPE
- prompt "PPP MPPE/MPPC module"
- tristate
+ tristate "PPP MPPE/MPPC module"
depends on ADK_KERNEL_PPP
select ADK_KERNEL_CRYPTO
select ADK_KERNEL_CRYPTO_ARC4
select ADK_KERNEL_CRYPTO_SHA1
select ADK_KERNEL_CRYPTO_ECB
- default m if ADK_PACKAGE_PPTPD
- default n
help
Support for the MPPE Encryption protocol, as employed by the
Microsoft Point-to-Point Tunneling Protocol.
@@ -238,41 +196,25 @@ config ADK_KERNEL_PPP_MPPE
configuring PPTP clients and servers to utilize this method.
config ADK_KERNEL_PPPOATM
- prompt "PPPoA (PPP over ATM) kernel support"
- tristate
+ tristate "PPPoA (PPP over ATM) kernel support"
depends on ADK_KERNEL_PPP
select ADK_KERNEL_ATM
- default n
help
Support for PPP over ATM
config ADK_KERNEL_PPPOE
- prompt "PPPoE (PPP over Ethernet) kernel support"
- tristate
+ tristate "PPPoE (PPP over Ethernet) kernel support"
depends on ADK_KERNEL_PPP
- default m if ADK_PACKAGE_PPP_MOD_PPPOE
- default n
help
Support for PPP over Ethernet
config ADK_KERNEL_TUN
- prompt "Universal TUN/TAP driver"
- tristate
- default m if ADK_PACKAGE_CHILLISPOT
- default m if ADK_PACKAGE_AICCU
- default m if ADK_PACKAGE_TINC
- default m if ADK_PACKAGE_VTUN
- default m if ADK_PACKAGE_VPNC
- default m if ADK_PACKAGE_OPENVPN
- default n
+ tristate "Universal TUN/TAP driver"
help
Kernel support for the TUN/TAP tunneling device
config ADK_KERNEL_BONDING
- prompt "Bonding driver support"
- tristate
- select BUSYBOX_IFENSLAVE
- default n
+ tristate "Bonding driver support"
help
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
Channels together. This is called 'Etherchannel' by Cisco,
@@ -285,8 +227,7 @@ config ADK_KERNEL_BONDING
information.
config ADK_KERNEL_MPTCP
- prompt "Multipath TCP support"
- boolean
+ bool "Multipath TCP support"
select ADK_KERNEL_IPV6
select ADK_KERNEL_ADDON_MPTCP
help
diff --git a/target/linux/config/Config.in.spi b/target/linux/config/Config.in.spi
index d57869c70..06781c0ce 100644
--- a/target/linux/config/Config.in.spi
+++ b/target/linux/config/Config.in.spi
@@ -2,19 +2,19 @@ menu "SPI driver support"
depends on ADK_TARGET_WITH_SPI
config ADK_KERNEL_SPI
- boolean
+ bool
config ADK_KERNEL_SPI_DEBUG
- boolean
+ bool
config ADK_KERNEL_SPI_MASTER
- boolean
+ bool
config ADK_KERNEL_SPI_BITBANG
tristate
config ADK_KERNEL_BCM2708_SPIDEV
- tristate
+ bool
config ADK_KERNEL_SPI_AR71XX
tristate
@@ -33,8 +33,7 @@ config ADK_KERNEL_SPI_PXA2XX
select ADK_KERNEL_SPI
config ADK_KERNEL_SPI_BCM2708
- prompt "SPI driver for Raspberry PI"
- tristate
+ tristate "SPI driver for Raspberry PI"
select ADK_KERNEL_SPI
select ADK_KERNEL_SPI_MASTER
select ADK_KERNEL_SPI_BITBANG
@@ -45,8 +44,7 @@ config ADK_KERNEL_SPI_BCM2708
default n
config ADK_KERNEL_SPI_IMX
- prompt "SPI driver for Solidrun IMX6"
- tristate
+ tristate "SPI driver for Solidrun IMX6"
select ADK_KERNEL_SPI
select ADK_KERNEL_SPI_MASTER
select ADK_KERNEL_SPI_BITBANG
@@ -56,17 +54,13 @@ config ADK_KERNEL_SPI_IMX
default n
config ADK_KERNEL_SPI_SPIDEV
- prompt "SPI userland driver"
- tristate
+ tristate "SPI userland driver"
select ADK_KERNEL_SPI
select ADK_KERNEL_SPI_MASTER
- default n
config ADK_KERNEL_SPI_GPIO
- prompt "GPIO support"
- tristate
+ tristate "SPI GPIO support"
select ADK_KERNEL_SPI
select ADK_KERNEL_SPI_MASTER
- default n
-
+
endmenu
diff --git a/target/linux/config/Config.in.usb b/target/linux/config/Config.in.usb
index 853724c63..0577d277b 100644
--- a/target/linux/config/Config.in.usb
+++ b/target/linux/config/Config.in.usb
@@ -2,19 +2,19 @@ menu "USB support"
depends on ADK_TARGET_WITH_USB || ADK_TARGET_SYSTEM_QEMU_X86_64 || ADK_TARGET_SYSTEM_QEMU_X86
config ADK_KERNEL_USB_SUPPORT
- boolean
+ bool
config ADK_KERNEL_USB_EHCI_ROOT_HUB_TT
- boolean
+ bool
config ADK_KERNEL_USB_EHCI_TT_NEWSCHED
- boolean
+ bool
config ADK_KERNEL_USB_GADGET
tristate
config ADK_KERNEL_USB_PHY
- boolean
+ bool
config ADK_KERNEL_USB_MXS_PHY
tristate
@@ -23,16 +23,14 @@ config ADK_KERNEL_USB_MXS_PHY
default n
config ADK_KERNEL_USB_OHCI_HCD_PLATFORM
- boolean
+ bool
select ADK_KERNEL_USB_OHCI_HCD
- default n
config ADK_KERNEL_USB_LIBUSUAL
tristate
config ADK_KERNEL_USB
- prompt "USB support"
- tristate
+ tristate "USB support"
select ADK_KERNEL_NLS
select ADK_KERNEL_USB_SUPPORT
default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C
@@ -75,8 +73,7 @@ config ADK_KERNEL_USB
menu "USB controller support"
config ADK_KERNEL_USB_EHCI_HCD
- prompt "Support for USB EHCI 2.0 controllers"
- tristate
+ tristate "Support for USB EHCI 2.0 controllers"
select ADK_KERNEL_USB_EHCI_ROOT_HUB_TT
select ADK_KERNEL_USB_EHCI_TT_NEWSCHED
select ADK_KERNEL_USB_MXS_PHY if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
@@ -111,8 +108,7 @@ config ADK_KERNEL_USB_EHCI_HCD
config ADK_KERNEL_USB_UHCI_HCD
- prompt "Support for UHCI controllers"
- tristate
+ tristate "Support for UHCI controllers"
depends on ADK_KERNEL_USB
depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
depends on !ADK_TARGET_SYSTEM_RASPBERRY_PI
@@ -130,8 +126,7 @@ config ADK_KERNEL_USB_UHCI_HCD
133). If unsure, say Y.
config ADK_KERNEL_USB_OHCI_HCD
- prompt "Support for OHCI controllers"
- tristate
+ tristate "Support for OHCI controllers"
depends on ADK_KERNEL_USB
depends on !ADK_TARGET_SYSTEM_RASPBERRY_PI
default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C
@@ -151,24 +146,23 @@ config ADK_KERNEL_USB_OHCI_HCD
right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
config ADK_KERNEL_USB_DWCOTG
- prompt "Support for DWCOTG controller"
- boolean
+ bool "Support for DWCOTG controller"
select ADK_KERNEL_USB
depends on ADK_TARGET_SYSTEM_RASPBERRY_PI
- default y
+ default y if ADK_TARGET_SYSTEM_RASPBERRY_PI
+ default n
help
The Synopsis DWC controller is a dual-role
host/peripheral/OTG ("On The Go") USB controllers.
config ADK_KERNEL_USB_CHIPIDEA_UDC
- boolean
+ bool
config ADK_KERNEL_USB_CHIPIDEA_HOST
- boolean
+ bool
config ADK_KERNEL_USB_CHIPIDEA
- prompt "Support for ChipIdea controller"
- tristate
+ tristate "Support for ChipIdea controller"
select ADK_KERNEL_USB_CHIPIDEA_UDC
select ADK_KERNEL_USB_CHIPIDEA_HOST
select ADK_KERNEL_USB_GADGET
@@ -178,12 +172,10 @@ config ADK_KERNEL_USB_CHIPIDEA
default n
config ADK_KERNEL_USB_ISP116X_HCD
- prompt "Support for ISP116X"
- tristate
+ tristate "Support for ISP116X"
depends on ADK_KERNEL_USB
depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
depends on !ADK_TARGET_SYSTEM_RASPBERRY_PI
- default n
help
The ISP1160 and ISP1161 chips are USB host controllers. Enable this
option if your board has this chip. If unsure, say N.
@@ -191,8 +183,7 @@ config ADK_KERNEL_USB_ISP116X_HCD
This driver does not support isochronous transfers.
config ADK_KERNEL_USB_SL811_HCD
- prompt "Support for SL811HS"
- tristate
+ tristate "Support for SL811HS"
depends on ADK_KERNEL_USB
depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
depends on !ADK_TARGET_SYSTEM_RASPBERRY_PI
@@ -207,47 +198,37 @@ endmenu
menu "USB devices support"
-config ADK_KERNEL_USB_STORAGE
- prompt "Support for USB storage devices"
+config ADK_KERNEL_USB_NET_DRIVERS
tristate
+
+config ADK_KERNEL_USB_STORAGE
+ tristate "Support for USB storage devices"
select ADK_KERNEL_SCSI
select ADK_KERNEL_BLK_DEV_SD
- default n
config ADK_KERNEL_SND_USB_AUDIO
- prompt "Support for USB sound adapter"
- tristate
+ tristate "Support for USB sound adapter"
select ADK_KERNEL_SND
select ADK_KERNEL_SND_USB
select ADK_KERNEL_SND_RAWMIDI
- default n
config ADK_KERNEL_USB_HSO
- prompt "Support for USB HSO devices"
- tristate
+ tristate "Support for USB HSO devices"
select ADK_KERNEL_RFKILL
select ADK_KERNEL_USB_STORAGE
- default n
config ADK_KERNEL_USB_PRINTER
- prompt "Support for USB printers"
- tristate
- default n
+ tristate "Support for USB printers"
config ADK_KERNEL_USB_ACM
- prompt "Support for USB modems/isdn controllers"
- tristate
- default n
+ tristate "Support for USB modems/isdn controllers"
config ADK_KERNEL_USB_PEGASUS
- prompt "Support for USB Pegasus network cards"
- tristate
- default n
+ tristate "Support for USB Pegasus network cards"
+ select ADK_KERNEL_USB_NET_DRIVERS
config ADK_KERNEL_USB_SERIAL
- prompt "Support for USB-to-serial converters"
- tristate
- default n
+ tristate "Support for USB-to-serial converters"
help
Say Y here if you have a USB device that provides normal serial
ports, or acts like a serial device, and you want to connect it to
@@ -258,20 +239,16 @@ config ADK_KERNEL_USB_SERIAL
supported, and on how to use them.
config ADK_KERNEL_USB_SERIAL_BELKIN
- prompt "Support for Belkin USB-to-serial converters"
- tristate
+ tristate "Support for Belkin USB-to-serial converters"
depends on ADK_KERNEL_USB_SERIAL
- default n
help
Say Y here if you want to use a Belkin USB Serial single port
adaptor (F5U103 is one of the model numbers) or the Peracom single
port USB to serial adapter.
config ADK_KERNEL_USB_SERIAL_FTDI_SIO
- prompt "Support for FTDI USB-to-serial converter"
- tristate
+ tristate "Support for FTDI USB-to-serial converter"
depends on ADK_KERNEL_USB_SERIAL
- default n
help
Say Y here if you want to use a FTDI SIO single port USB to serial
converter device. The implementation I have is called the USC-1000.
@@ -281,10 +258,8 @@ config ADK_KERNEL_USB_SERIAL_FTDI_SIO
information on this driver and the device.
config ADK_KERNEL_USB_SERIAL_MCT_U232
- prompt "Support for Magic Control Technology USB-to-Serial converters"
- tristate
+ tristate "Support for Magic Control Technology USB-to-Serial converters"
depends on ADK_KERNEL_USB_SERIAL
- default n
help
Say Y here if you want to use a USB Serial single port adapter from
Magic Control Technology Corp. (U232 is one of the model numbers).
@@ -293,19 +268,15 @@ config ADK_KERNEL_USB_SERIAL_MCT_U232
BAY, Belkin F5U109, and Belkin F5U409 devices.
config ADK_KERNEL_USB_SERIAL_PL2303
- prompt "Support for Prolific PL2303 USB-to-Serial converters"
- tristate
+ tristate "Support for Prolific PL2303 USB-to-Serial converters"
depends on ADK_KERNEL_USB_SERIAL
- default n
help
Say Y here if you want to use the PL2303 USB Serial single port
adapter from Prolific.
config ADK_KERNEL_USB_SERIAL_VISOR
- prompt "Support for Handspring Visor / Palm m50x / Sony Clie Driver"
- tristate
+ tristate "Support for Handspring Visor / Palm m50x / Sony Clie Driver"
depends on ADK_KERNEL_USB_SERIAL
- default n
help
Say Y here if you want to connect to your HandSpring Visor, Palm
m500 or m505 through its USB docking station. See
@@ -313,25 +284,17 @@ config ADK_KERNEL_USB_SERIAL_VISOR
driver.
config ADK_KERNEL_USB_ATM
- prompt "Support for USB ATM devices"
- tristate
- default n
+ tristate "Support for USB ATM devices"
config ADK_KERNEL_USB_ATM_SPEEDTOUCH
- prompt "Support for USB Speedtouch ADSL modem"
- tristate
+ tristate "Support for USB Speedtouch ADSL modem"
depends on ADK_KERNEL_USB_ATM
- default n
-
-config ADK_KERNEL_USB_USBNET
- prompt "Multi-purpose USB Networking Framework"
- tristate
- default n
config ADK_KERNEL_USB_SISUSBVGA
- prompt "USB 2.0 SVGA dongle support (Net2280/SiS315)"
- tristate
- default n
+ tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
+
+config ADK_KERNEL_USB_USBNET
+ tristate
endmenu
endmenu
diff --git a/target/linux/kernel.config b/target/linux/kernel.config
index b1c580da0..696820c61 100644
--- a/target/linux/kernel.config
+++ b/target/linux/kernel.config
@@ -25,7 +25,6 @@ CONFIG_TMPFS=y
CONFIG_NLS=y
CONFIG_EMBEDDED=y
CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HOTPLUG=y
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 16:29:59 +0000