diff options
-rwxr-xr-x | scripts/install.sh | 4 | ||||
-rw-r--r-- | target/arm/Makefile | 13 | ||||
-rw-r--r-- | target/arm/kernel/raspberry-pi2 | 2 | ||||
-rw-r--r-- | target/arm/systems/raspberry-pi | 1 | ||||
-rw-r--r-- | target/arm/systems/raspberry-pi2 | 1 | ||||
-rw-r--r-- | target/config/Config.in.tools | 2 | ||||
-rw-r--r-- | target/linux/config/Config.in.audio | 105 | ||||
-rw-r--r-- | target/linux/config/Config.in.dma | 6 | ||||
-rw-r--r-- | target/linux/config/Config.in.i2c | 11 | ||||
-rw-r--r-- | target/linux/config/Config.in.regmap | 19 | ||||
-rw-r--r-- | target/linux/config/Config.in.spi | 6 |
11 files changed, 88 insertions, 82 deletions
diff --git a/scripts/install.sh b/scripts/install.sh index 30c4449a8..df39ba9f8 100755 --- a/scripts/install.sh +++ b/scripts/install.sh @@ -546,8 +546,8 @@ case $target { break done mkdir "$B/"overlays - for x in "$B/"*-overlay.dtb; do - [[ -e "$x" ]] && mv "$B/"*-overlay.dtb "$B/"overlays + for x in "$fwdir"/overlays/*.dtb; do + [[ -e "$x" ]] && cp "$fwdir"/overlays/*.dtb "$B/"overlays break done umount_fs "$B" diff --git a/target/arm/Makefile b/target/arm/Makefile index e654bdd6e..a86a4ac2e 100644 --- a/target/arm/Makefile +++ b/target/arm/Makefile @@ -135,17 +135,18 @@ ifeq ($(ADK_TARGET_QEMU_ARM_MODEL_VEXPRESS_A9),y) env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \ dtbs $(MAKE_TRACE) endif -ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI),y) - env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \ - dtbs $(MAKE_TRACE) -endif -ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI2),y) +ifeq ($(ADK_TARGET_BOARD_BCM28XX),y) env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \ dtbs $(MAKE_TRACE) + mkdir -p $(FW_DIR)/overlays + for x in $(LINUX_DIR)/arch/arm/boot/dts/overlays/*.dtb; do \ + [[ -e "$$x" ]] && cp $(LINUX_DIR)/arch/arm/boot/dts/overlays/*.dtb $(FW_DIR)/overlays; \ + break; \ + done endif ifeq ($(ADK_TARGET_SYSTEM_BANANA_PRO),y) env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \ - sun7i-a20-bananapro.dtb + sun7i-a20-bananapro.dtb $(MAKE_TRACE) endif ifeq ($(ADK_TARGET_SYSTEM_SOLIDRUN_IMX6),y) env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \ diff --git a/target/arm/kernel/raspberry-pi2 b/target/arm/kernel/raspberry-pi2 index a7c4510bc..7aa99d897 100644 --- a/target/arm/kernel/raspberry-pi2 +++ b/target/arm/kernel/raspberry-pi2 @@ -7,7 +7,9 @@ CONFIG_FIQ=y CONFIG_ATAGS=y CONFIG_KUSER_HELPERS=y CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_BRCM_CHAR_DRIVERS=y CONFIG_BCM2708_VCHIQ=y +CONFIG_BCM2708_VCMEM=y CONFIG_MAILBOX=y CONFIG_BCM2835_MBOX=y CONFIG_OF=y diff --git a/target/arm/systems/raspberry-pi b/target/arm/systems/raspberry-pi index 57b08616b..75267c12b 100644 --- a/target/arm/systems/raspberry-pi +++ b/target/arm/systems/raspberry-pi @@ -13,6 +13,7 @@ config ADK_TARGET_SYSTEM_RASPBERRY_PI select ADK_TARGET_WITH_SPI select ADK_TARGET_WITH_NET select ADK_TARGET_WITH_BLOCK + select ADK_TARGET_WITH_SOUND select ADK_PACKAGE_BCM28XX_BOOTLOADER select ADK_TARGET_WITH_ROOT_RW select ADK_TARGET_KERNEL_ZIMAGE diff --git a/target/arm/systems/raspberry-pi2 b/target/arm/systems/raspberry-pi2 index 2e3a0ec8c..e0f438fd5 100644 --- a/target/arm/systems/raspberry-pi2 +++ b/target/arm/systems/raspberry-pi2 @@ -14,6 +14,7 @@ config ADK_TARGET_SYSTEM_RASPBERRY_PI2 select ADK_TARGET_WITH_SMP select ADK_TARGET_WITH_NET select ADK_TARGET_WITH_BLOCK + select ADK_TARGET_WITH_SOUND select ADK_PACKAGE_BCM28XX_BOOTLOADER select ADK_TARGET_WITH_ROOT_RW select ADK_TARGET_KERNEL_ZIMAGE diff --git a/target/config/Config.in.tools b/target/config/Config.in.tools index 06c2b544c..858e57ea3 100644 --- a/target/config/Config.in.tools +++ b/target/config/Config.in.tools @@ -209,7 +209,7 @@ config ADK_HOST_BUILD_PCRE config ADK_HOST_BUILD_KMOD bool - default y if ADK_RUNTIME_DEV_UDEV + default y source "target/config/Config.in.prereq" diff --git a/target/linux/config/Config.in.audio b/target/linux/config/Config.in.audio index 54270c374..f47a490ea 100644 --- a/target/linux/config/Config.in.audio +++ b/target/linux/config/Config.in.audio @@ -1,6 +1,9 @@ menu "Audio devices support" depends on ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SOUND || ADK_TARGET_QEMU +config ADK_KERNEL_SOUND + tristate + config ADK_KERNEL_SND_PCI bool @@ -13,60 +16,56 @@ config ADK_KERNEL_SND_SOC config ADK_KERNEL_SND_ARM bool +config ADK_KERNEL_SND_TIMER + tristate + +config ADK_KERNEL_SND_PCM + tristate + +config ADK_KERNEL_SND_HWDEP + tristate + +config ADK_KERNEL_SND_RAWMIDI + tristate + +config ADK_KERNEL_SND_AC97_CODEC + tristate + config ADK_KERNEL_SND_SOC_SPDIF - bool + tristate config ADK_KERNEL_SND_SOC_FSL_ASRC - bool + tristate config ADK_KERNEL_SND_SOC_FSL_SPDIF - bool + tristate config ADK_KERNEL_SND_SOC_IMX_SGTL5000 - bool + tristate config ADK_KERNEL_SND_SOC_IMX_PCM_DMA - bool + tristate config ADK_KERNEL_SND_SOC_HDMI_CODEC - bool + tristate config ADK_KERNEL_SND_SOC_IMX_HDMI_DMA - bool + tristate config ADK_KERNEL_SND_SOC_IMX_SPDIF - bool + tristate config ADK_KERNEL_SND_SOC_IMX_HDMI - bool + tristate config ADK_KERNEL_SND_PXA2XX_AC97 - bool + tristate config ADK_KERNEL_SND_PXA2XX_SOC - bool - -config ADK_KERNEL_SND_TIMER - bool - -config ADK_KERNEL_SND_PCM - bool - select ADK_KERNEL_SND_TIMER - -config ADK_KERNEL_SND_HWDEP - bool - -config ADK_KERNEL_SOUND - bool - -config ADK_KERNEL_SND_RAWMIDI - bool - -config ADK_KERNEL_SND_AC97_CODEC - bool + tristate config ADK_KERNEL_SND_SOC_I2C_AND_SPI - bool + tristate config ADK_KERNEL_SND_SOC_WM8731 tristate @@ -95,50 +94,50 @@ config ADK_KERNEL_SND_SOC_PCM512x_SPI select ADK_KERNEL_SND_SOC_I2C_AND_SPI config ADK_KERNEL_SND - bool + tristate select ADK_KERNEL_SOUND select ADK_KERNEL_SND_PCM select ADK_KERNEL_SND_HWDEP config ADK_KERNEL_SND_INTEL8X0 - bool "Intel AC97 driver" + tristate "Intel AC97 driver" select ADK_KERNEL_SND select ADK_KERNEL_SND_PCI select ADK_KERNEL_SND_AC97_CODEC - default y if ADK_TARGET_SYSTEM_IBM_X40 - default y if ADK_TARGET_QEMU_WITH_AUDIO + default m if ADK_TARGET_SYSTEM_IBM_X40 + default m if ADK_TARGET_QEMU_WITH_AUDIO default n depends on ADK_TARGET_WITH_PCI || ADK_TARGET_QEMU_SYSTEM_X86 || ADK_TARGET_QEMU_SYSTEM_X86_64 help Driver for intel chipsets. config ADK_KERNEL_SND_VIA82XX - bool "VIA82XX driver" + tristate "VIA82XX driver" select ADK_KERNEL_SND depends on ADK_TARGET_WITH_PCI help ALSA VIA82XX driver config ADK_KERNEL_SND_ENS1370 - bool "Ensoniq 1370 driver" + tristate "Ensoniq 1370 driver" select ADK_KERNEL_SND depends on ADK_TARGET_WITH_PCI help ALSA Ensonique 1370 driver config ADK_KERNEL_SND_CS5535AUDIO - bool "AMD CS5535 driver" + tristate "AMD CS5535 driver" select ADK_KERNEL_SND_PCI select ADK_KERNEL_SND_AC97_CODEC select ADK_KERNEL_SND - default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG - default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C + default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG + default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C depends on ADK_TARGET_WITH_PCI help ALSA AMD CS5535 driver config ADK_KERNEL_SND_PXA2XX_SOC_SPITZ - bool "Sharp Zaurus SoC" + tristate "Sharp Zaurus SoC" select ADK_KERNEL_SND select ADK_KERNEL_SND_ARM select ADK_KERNEL_SND_PXA2XX_AC97 @@ -146,15 +145,15 @@ config ADK_KERNEL_SND_PXA2XX_SOC_SPITZ select ADK_KERNEL_SND_SOC select ADK_KERNEL_SND_PXA2XX_SOC depends on ADK_TARGET_SYSTEM_SHARP_ZAURUS - default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS + default m if ADK_TARGET_SYSTEM_SHARP_ZAURUS default n config ADK_KERNEL_SND_BCM2835 - bool "BCM2835 onboard soundcard" + tristate "BCM2835 onboard soundcard" select ADK_KERNEL_SND select ADK_KERNEL_SND_ARM depends on ADK_TARGET_BOARD_BCM28XX - default y if ADK_TARGET_BOARD_BCM28XX + default m if ADK_TARGET_BOARD_BCM28XX default n config ADK_KERNEL_SND_BCM2708_SOC_I2S @@ -164,6 +163,7 @@ config ADK_KERNEL_SND_BCM2708_SOC_I2S select ADK_KERNEL_SND_SOC select ADK_KERNEL_SND_BCM2835 select ADK_KERNEL_DMA_BCM2835 + select ADK_KERNEL_REGMAP select ADK_KERNEL_REGMAP_MMIO depends on ADK_TARGET_BOARD_BCM28XX default n @@ -171,39 +171,39 @@ config ADK_KERNEL_SND_BCM2708_SOC_I2S config ADK_KERNEL_SND_BCM2708_SOC_HIFIBERRY_AMP tristate "Hifiberry AMP" select ADK_KERNEL_SND_BCM2708_SOC_I2S - depends on ADK_TARGET_BOARD_BCM28XX && ADK_KERNEL_VERSION_3_18 + depends on ADK_TARGET_BOARD_BCM28XX config ADK_KERNEL_SND_BCM2708_SOC_HIFIBERRY_DAC tristate "Hifiberry DAC" select ADK_KERNEL_SND_BCM2708_SOC_I2S select ADK_KERNEL_SND_SOC_PCM5102A - depends on ADK_TARGET_BOARD_BCM28XX && ADK_KERNEL_VERSION_3_18 + depends on ADK_TARGET_BOARD_BCM28XX config ADK_KERNEL_SND_BCM2708_SOC_HIFIBERRY_DIGI tristate "Hifiberry DIGI" select ADK_KERNEL_SND_BCM2708_SOC_I2S select ADK_KERNEL_SND_SOC_WM8804 - depends on ADK_TARGET_BOARD_BCM28XX && ADK_KERNEL_VERSION_3_18 + depends on ADK_TARGET_BOARD_BCM28XX config ADK_KERNEL_SND_BCM2708_SOC_RPI_DAC tristate "RPI-DAC" select ADK_KERNEL_SND_BCM2708_SOC_I2S - depends on ADK_TARGET_BOARD_BCM28XX && ADK_KERNEL_VERSION_3_18 + depends on ADK_TARGET_BOARD_BCM28XX config ADK_KERNEL_SND_BCM2708_SOC_IQAUDIO_DAC tristate "IQAudio-DAC" select ADK_KERNEL_SND_BCM2708_SOC_I2S select ADK_KERNEL_SND_SOC_PCM512x_I2C - depends on ADK_TARGET_BOARD_BCM28XX && ADK_KERNEL_VERSION_3_18 + depends on ADK_TARGET_BOARD_BCM28XX config ADK_KERNEL_SND_BCM2708_SOC_RPI_PROTO tristate "Rpi-Proto" select ADK_KERNEL_SND_BCM2708_SOC_I2S select ADK_KERNEL_SND_SOC_WM8731 - depends on ADK_TARGET_BOARD_BCM28XX && ADK_KERNEL_VERSION_3_18 + depends on ADK_TARGET_BOARD_BCM28XX config ADK_KERNEL_SND_IMX_SOC - bool "IMX6 SoC sound chip" + tristate "IMX6 SoC sound chip" select ADK_KERNEL_SND select ADK_KERNEL_SND_SOC select ADK_KERNEL_SND_SOC_HDMI_CODEC @@ -214,10 +214,11 @@ config ADK_KERNEL_SND_IMX_SOC select ADK_KERNEL_SND_SOC_IMX_SGTL5000 if ADK_TARGET_HUMMINGBOARD_I2EX select ADK_KERNEL_SND_SOC_FSL_ASRC select ADK_KERNEL_SND_SOC_FSL_SPDIF + select ADK_KERNEL_REGMAP select ADK_KERNEL_REGMAP_SPI select ADK_KERNEL_REGMAP_I2C depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default y if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 + default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 default n endmenu diff --git a/target/linux/config/Config.in.dma b/target/linux/config/Config.in.dma index 0e542e14e..c01523767 100644 --- a/target/linux/config/Config.in.dma +++ b/target/linux/config/Config.in.dma @@ -35,15 +35,19 @@ config ADK_KERNEL_BCM_VC_SM config ADK_KERNEL_BCM_VC_CMA bool +config ADK_KERNEL_BCM_VCIO + bool + config ADK_KERNEL_DMA_BCM2708 bool select ADK_KERNEL_DMADEVICES select ADK_KERNEL_CMA select ADK_KERNEL_CMA_SIZE_SEL_MBYTES - select ADK_KERNEL_CMA_SIZE_128 + select ADK_KERNEL_CMA_SIZE_8 select ADK_KERNEL_DMA_CMA select ADK_KERNEL_BCM_VC_SM select ADK_KERNEL_BCM_VC_CMA + select ADK_KERNEL_BCM_VCIO depends on ADK_TARGET_BOARD_BCM28XX default y if ADK_TARGET_BOARD_BCM28XX default n diff --git a/target/linux/config/Config.in.i2c b/target/linux/config/Config.in.i2c index 02c6bfa45..38d63e118 100644 --- a/target/linux/config/Config.in.i2c +++ b/target/linux/config/Config.in.i2c @@ -10,10 +10,11 @@ config ADK_KERNEL_I2C_CHARDEV config ADK_KERNEL_I2C_BCM2708 tristate "I2C driver for BCM2835 boards" select ADK_KERNEL_I2C + select ADK_KERNEL_REGMAP select ADK_KERNEL_REGMAP_I2C select ADK_KERNEL_I2C_CHARDEV depends on ADK_TARGET_BOARD_BCM28XX - default y if ADK_TARGET_BOARD_BCM28XX + default m if ADK_TARGET_BOARD_BCM28XX default n help I2C driver for BCM2835 boards. @@ -21,10 +22,11 @@ config ADK_KERNEL_I2C_BCM2708 config ADK_KERNEL_I2C_SUNXI tristate "I2C driver for SUNXI boards" select ADK_KERNEL_I2C + select ADK_KERNEL_REGMAP select ADK_KERNEL_REGMAP_I2C select ADK_KERNEL_I2C_CHARDEV depends on ADK_TARGET_SYSTEM_BANANA_PRO - default y if ADK_TARGET_SYSTEM_BANANA_PRO + default m if ADK_TARGET_SYSTEM_BANANA_PRO default n help I2C driver for SUNXI boards. @@ -32,10 +34,11 @@ config ADK_KERNEL_I2C_SUNXI config ADK_KERNEL_I2C_IMX tristate "I2C driver for IMX6 boards" select ADK_KERNEL_I2C + select ADK_KERNEL_REGMAP select ADK_KERNEL_REGMAP_I2C select ADK_KERNEL_I2C_CHARDEV depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default y if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 + default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 default n help I2C driver for IMX6 boards. @@ -45,7 +48,7 @@ config ADK_KERNEL_SCX200_ACB depends on ADK_CPU_GEODE select ADK_KERNEL_I2C select ADK_KERNEL_I2C_CHARDEV - default y if ADK_CPU_GEODE + default m if ADK_CPU_GEODE default n help I2C driver for Geode boards. diff --git a/target/linux/config/Config.in.regmap b/target/linux/config/Config.in.regmap index 44a8bcca0..47823cf6b 100644 --- a/target/linux/config/Config.in.regmap +++ b/target/linux/config/Config.in.regmap @@ -1,25 +1,16 @@ config ADK_KERNEL_REGMAP - boolean + bool select ADK_KERNEL_LZO_COMPRESS select ADK_KERNEL_LZO_DECOMPRESS - default n config ADK_KERNEL_REGMAP_I2C - boolean - select ADK_KERNEL_REGMAP - default n + tristate config ADK_KERNEL_REGMAP_SPI - boolean - select ADK_KERNEL_REGMAP - default n + tristate config ADK_KERNEL_REGMAP_MMIO - boolean - select ADK_KERNEL_REGMAP - default n + tristate config ADK_KERNEL_REGMAP_IRQ - boolean - select ADK_KERNEL_REGMAP - default n + bool diff --git a/target/linux/config/Config.in.spi b/target/linux/config/Config.in.spi index c90c402ff..4d5450f9a 100644 --- a/target/linux/config/Config.in.spi +++ b/target/linux/config/Config.in.spi @@ -37,10 +37,11 @@ config ADK_KERNEL_SPI_BCM2708 select ADK_KERNEL_SPI select ADK_KERNEL_SPI_MASTER select ADK_KERNEL_SPI_BITBANG + select ADK_KERNEL_REGMAP select ADK_KERNEL_REGMAP_SPI select ADK_KERNEL_BCM2708_SPIDEV depends on ADK_TARGET_BOARD_BCM28XX - default y if ADK_TARGET_BOARD_BCM28XX + default m if ADK_TARGET_BOARD_BCM28XX default n config ADK_KERNEL_SPI_IMX @@ -48,9 +49,10 @@ config ADK_KERNEL_SPI_IMX select ADK_KERNEL_SPI select ADK_KERNEL_SPI_MASTER select ADK_KERNEL_SPI_BITBANG + select ADK_KERNEL_REGMAP select ADK_KERNEL_REGMAP_SPI depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default y if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 + default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 default n config ADK_KERNEL_SPI_SPIDEV |